[PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
Heiko Stübner
heiko at sntech.de
Mon Aug 6 05:23:17 EDT 2012
Am Montag, 6. August 2012, 10:23:52 schrieb Kyungmin Park:
> Hi Praveen,
>
> On 8/6/12, Praveen Paneri <p.paneri at samsung.com> wrote:
> > Hi Heiko,
> >
> > On Mon, Aug 6, 2012 at 3:24 AM, Heiko Stübner <heiko at sntech.de> wrote:
> >> Hi Praveen,
> >>
> >> Am Mittwoch, 1. August 2012, 15:05:47 schrieb Praveen Paneri:
> >>> This driver uses usb_phy interface to interact with s3c-hsotg. Supports
> >>> phy_init and phy_shutdown functions to enable/disable phy. Tested with
> >>> smdk6410 and smdkv310. More SoCs can be brought under later.
> >>
> >> Looks cool.
> >
> > Thanks
> >
> >> From what I've seen the phy controllers on newer Samsung SoCs are still
> >> somewhat similar to the one on my s3c2416/2450 machines. So hopefully at
> >> some
> >> point after the driver has settled, I'll find the time to add support
> >> for these to the phy driver.
> >
> > Yes! that's great.
> >
> >> Out of curiosity, what does the "sec" in sec_usbphy for?
> >
> > Its Samsung Electronics Co. :)
>
> I'm also prefer to use 'samsung' or 'exynos'. Since I didn't see the
> 'sec' prefix for samsung drivers.
I'd second that. All new generic samsung drivers look like this (i.e. gpio-
samsung, pwm-samsung).
Just checked the datasheets again. This general phy type is used in some form
down to the S3C2443, so I'd prefer something with samsung in the name :-)
Heiko
>
> Thank you,
> Kyungmin Park
>
> > Praveen
> >
> >>> Signed-off-by: Praveen Paneri <p.paneri at samsung.com>
> >>
> >> Acked-by: Heiko Stuebner <heiko at sntech.de>
> >>
> >>
> >> Heiko
> >>
> >>> ---
> >>>
> >>> .../devicetree/bindings/usb/samsung-usbphy.txt | 9 +
> >>> drivers/usb/phy/Kconfig | 8 +
> >>> drivers/usb/phy/Makefile | 1 +
> >>> drivers/usb/phy/sec_usbphy.c | 354
> >>>
> >>> ++++++++++++++++++++ drivers/usb/phy/sec_usbphy.h
> >>>
> >>> 48 +++
> >>> include/linux/platform_data/s3c-hsotg.h | 5 +
> >>> 6 files changed, 425 insertions(+), 0 deletions(-)
> >>> create mode 100644
> >>>
> >>> Documentation/devicetree/bindings/usb/samsung-usbphy.txt create mode
> >>> 100644 drivers/usb/phy/sec_usbphy.c
> >>>
> >>> create mode 100644 drivers/usb/phy/sec_usbphy.h
> >>>
> >>> diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
> >>> b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt new file
> >>> mode 100644
> >>> index 0000000..fefd9c8
> >>> --- /dev/null
> >>> +++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
> >>> @@ -0,0 +1,9 @@
> >>> +* Samsung's usb phy transceiver
> >>> +
> >>> +The Samsung's phy transceiver is used for controlling usb otg phy for
> >>> +s3c-hsotg usb device controller.
> >>> +
> >>> +Required properties:
> >>> +- compatible : should be "samsung,exynos4210-usbphy"
> >>> +- reg : base physical address of the phy registers and length of
> >>> memory mapped + region.
> >>> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> >>> index e7cf84f..abbebe2 100644
> >>> --- a/drivers/usb/phy/Kconfig
> >>> +++ b/drivers/usb/phy/Kconfig
> >>> @@ -15,3 +15,11 @@ config USB_ISP1301
> >>>
> >>> To compile this driver as a module, choose M here: the
> >>> module will be called isp1301.
> >>>
> >>> +
> >>> +config SEC_USBPHY
> >>> + bool "Samsung USB PHY controller Driver"
> >>> + depends on USB_S3C_HSOTG
> >>> + select USB_OTG_UTILS
> >>> + help
> >>> + Enable this to support Samsung USB phy controller for samsung
> >>> + SoCs.
> >>> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
> >>> index eca095b..6bb66f0 100644
> >>> --- a/drivers/usb/phy/Makefile
> >>> +++ b/drivers/usb/phy/Makefile
> >>> @@ -5,3 +5,4 @@
> >>>
> >>> ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
> >>>
> >>> obj-$(CONFIG_USB_ISP1301) += isp1301.o
> >>>
> >>> +obj-$(CONFIG_SEC_USBPHY) += sec_usbphy.o
> >>> diff --git a/drivers/usb/phy/sec_usbphy.c
> >>> b/drivers/usb/phy/sec_usbphy.c new file mode 100644
> >>> index 0000000..33119eb
> >>> --- /dev/null
> >>> +++ b/drivers/usb/phy/sec_usbphy.c
> >>> @@ -0,0 +1,354 @@
> >>> +/* linux/drivers/usb/phy/sec_usbphy.c
> >>> + *
> >>> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
> >>> + * http://www.samsung.com
> >>> + *
> >>> + * Author: Praveen Paneri <p.paneri at samsung.com>
> >>> + *
> >>> + * Samsung USB2.0 High-speed OTG transceiver, talks to S3C HS OTG
> >>> controller + *
> >>> + * This program is free software; you can redistribute it and/or
> >>> modify + * it under the terms of the GNU General Public License
> >>> version 2 as + * published by the Free Software Foundation.
> >>> + *
> >>> + * This program is distributed in the hope that it will be useful,
> >>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> >>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> >>> + * GNU General Public License for more details.
> >>> + *
> >>> + * You should have received a copy of the GNU General Public License
> >>> + * along with this program; if not, write to the Free Software
> >>> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> >>> +*/
> >>> +
> >>> +#include <linux/module.h>
> >>> +#include <linux/platform_device.h>
> >>> +#include <linux/clk.h>
> >>> +#include <linux/delay.h>
> >>> +#include <linux/err.h>
> >>> +#include <linux/io.h>
> >>> +#include <linux/of.h>
> >>> +#include <linux/usb/otg.h>
> >>> +#include <linux/platform_data/s3c-hsotg.h>
> >>> +
> >>> +#include "sec_usbphy.h"
> >>> +
> >>> +enum sec_cpu_type {
> >>> + TYPE_S3C64XX,
> >>> + TYPE_EXYNOS4210,
> >>> +};
> >>> +
> >>> +/*
> >>> + * struct sec_usbphy - transceiver driver state
> >>> + * @phy: transceiver structure
> >>> + * @plat: platform data
> >>> + * @dev: The parent device supplied to the probe function
> >>> + * @clk: usb phy clock
> >>> + * @regs: usb phy register memory base
> >>> + * @cpu_type: machine identifier
> >>> + */
> >>> +struct sec_usbphy {
> >>> + struct usb_phy phy;
> >>> + struct s3c_usbphy_plat *plat;
> >>> + struct device *dev;
> >>> + struct clk *clk;
> >>> + void __iomem *regs;
> >>> + int cpu_type;
> >>> +};
> >>> +
> >>> +#define phy_to_sec(x) container_of((x), struct
> >>> sec_usbphy, phy)
> >>> +
> >>> +/*
> >>> + * Enables or disables the phy clock
> >>> + * returns 0 on success else the error
> >>> + */
> >>> +static int sec_usbphy_clk_control(struct sec_usbphy *sec, bool on)
> >>> +{
> >>> + if (on) {
> >>> + if (!sec->clk) {
> >>> + sec->clk = clk_get(sec->dev, "otg");
> >>> + if (IS_ERR(sec->clk)) {
> >>> + dev_err(sec->dev, "Failed to get otg
> >>> clock\n");
> >>> + return PTR_ERR(sec->clk);
> >>> + }
> >>> + }
> >>> + clk_enable(sec->clk);
> >>> + } else {
> >>> + clk_disable(sec->clk);
> >>> + clk_put(sec->clk);
> >>> + }
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> +/*
> >>> + * Returns reference clock frequency
> >>> + */
> >>> +static int sec_usbphy_get_refclk_freq(struct sec_usbphy *sec)
> >>> +{
> >>> + struct clk *ref_clk;
> >>> + int refclk_freq = 0;
> >>> +
> >>> + ref_clk = clk_get(sec->dev, "xusbxti");
> >>> + if (IS_ERR(ref_clk)) {
> >>> + dev_err(sec->dev, "Failed to get reference clock\n");
> >>> + return PTR_ERR(ref_clk);
> >>> + }
> >>> +
> >>> + switch (clk_get_rate(ref_clk)) {
> >>> + case 12 * MHZ:
> >>> + refclk_freq |= S3C_PHYCLK_CLKSEL_12M;
> >>> + break;
> >>> + case 24 * MHZ:
> >>> + refclk_freq |= S3C_PHYCLK_CLKSEL_24M;
> >>> + break;
> >>> + default:
> >>> + case 48 * MHZ:
> >>> + /* default reference clock */
> >>> + refclk_freq |= S3C_PHYCLK_CLKSEL_48M;
> >>> + break;
> >>> + }
> >>> + clk_put(ref_clk);
> >>> +
> >>> + return refclk_freq;
> >>> +}
> >>> +
> >>> +static void sec_usbphy_enable(struct sec_usbphy *sec)
> >>> +{
> >>> + void __iomem *regs = sec->regs;
> >>> + u32 phypwr;
> >>> + u32 phyclk;
> >>> + u32 rstcon;
> >>> +
> >>> + /* set clock frequency for PLL */
> >>> + phyclk = sec_usbphy_get_refclk_freq(sec);
> >>> + phypwr = readl(regs + S3C_PHYPWR);
> >>> + rstcon = readl(regs + S3C_RSTCON);
> >>> +
> >>> + switch (sec->cpu_type) {
> >>> + case TYPE_S3C64XX:
> >>> + phyclk &= ~(S3C_PHYCLK_COMMON_ON_N);
> >>> + phypwr &= ~S3C_PHYPWR_NORMAL_MASK;
> >>> + rstcon |= S3C_RSTCON_PHY;
> >>> + break;
> >>> + case TYPE_EXYNOS4210:
> >>> + phypwr &= ~EXYNOS4_PHYPWR_NORMAL_MASK;
> >>> + rstcon |= S3C_RSTCON_PHY;
> >>> + default:
> >>> + break;
> >>> + }
> >>> +
> >>> + writel(phyclk, regs + S3C_PHYCLK);
> >>> + /* set to normal of PHY0 */
> >>> + writel(phypwr, regs + S3C_PHYPWR);
> >>> + /* reset all ports of PHY and Link */
> >>> + writel(rstcon, regs + S3C_RSTCON);
> >>> + udelay(10);
> >>> + rstcon &= ~S3C_RSTCON_PHY;
> >>> + writel(rstcon, regs + S3C_RSTCON);
> >>> +}
> >>> +
> >>> +static void sec_usbphy_disable(struct sec_usbphy *sec)
> >>> +{
> >>> + void __iomem *regs = sec->regs;
> >>> + u32 phypwr;
> >>> +
> >>> + phypwr = readl(regs + S3C_PHYPWR);
> >>> +
> >>> + switch (sec->cpu_type) {
> >>> + case TYPE_S3C64XX:
> >>> + phypwr |= S3C_PHYPWR_NORMAL_MASK;
> >>> + break;
> >>> + case TYPE_EXYNOS4210:
> >>> + phypwr |= EXYNOS4_PHYPWR_NORMAL_MASK;
> >>> + default:
> >>> + break;
> >>> + }
> >>> +
> >>> + /* unset to normal of PHY0 */
> >>> + writel(phypwr, regs + S3C_PHYPWR);
> >>> +}
> >>> +
> >>> +/*
> >>> + * The function passed to the usb driver for phy initialization
> >>> + */
> >>> +static int sec_usbphy_init(struct usb_phy *phy)
> >>> +{
> >>> + struct sec_usbphy *sec;
> >>> + int ret = 0;
> >>> +
> >>> + sec = phy_to_sec(phy);
> >>> +
> >>> + /* Enable the phy clock */
> >>> + ret = sec_usbphy_clk_control(sec, true);
> >>> + if (ret) {
> >>> + dev_err(sec->dev, "phy clock enable failed\n");
> >>> + return ret;
> >>> + }
> >>> +
> >>> + /* Disable phy isolation */
> >>> + if (sec->plat && sec->plat->pmu_isolation)
> >>> + sec->plat->pmu_isolation(false);
> >>> +
> >>> + /* Initialize usb phy registers */
> >>> + sec_usbphy_enable(sec);
> >>> + return ret;
> >>> +}
> >>> +
> >>> +/*
> >>> + * The function passed to the usb driver for phy shutdown
> >>> + */
> >>> +static void sec_usbphy_shutdown(struct usb_phy *phy)
> >>> +{
> >>> + struct sec_usbphy *sec;
> >>> +
> >>> + sec = phy_to_sec(phy);
> >>> +
> >>> + /* De-initialize usb phy registers */
> >>> + sec_usbphy_disable(sec);
> >>> +
> >>> + /* Enable phy isolation */
> >>> + if (sec->plat && sec->plat->pmu_isolation)
> >>> + sec->plat->pmu_isolation(true);
> >>> +
> >>> + /* Disable the phy clock */
> >>> + sec_usbphy_clk_control(sec, false);
> >>> +}
> >>> +
> >>> +static const struct of_device_id sec_usbphy_dt_match[];
> >>> +
> >>> +static inline int sec_usbphy_get_driver_data(struct platform_device
> >>> *pdev)
> >>> +{
> >>> +#ifdef CONFIG_OF
> >>> + int data;
> >>> + if (pdev->dev.of_node) {
> >>> + const struct of_device_id *match;
> >>> + match = of_match_node(sec_usbphy_dt_match,
> >>> pdev->dev.of_node);
> >>> + data = (int) match->data;
> >>> + return data;
> >>> + }
> >>> +#endif
> >>> + return platform_get_device_id(pdev)->driver_data;
> >>> +}
> >>> +
> >>> +static int __devinit sec_usbphy_probe(struct platform_device *pdev)
> >>> +{
> >>> + struct sec_usbphy *sec;
> >>> + struct s3c_usbphy_plat *pdata;
> >>> + struct device *dev = &pdev->dev;
> >>> + struct resource *phy_mem;
> >>> + void __iomem *phy_base;
> >>> + int ret;
> >>> +
> >>> + pdata = pdev->dev.platform_data;
> >>> + if (!pdata) {
> >>> + dev_err(&pdev->dev, "%s: no platform data defined\n",
> >>> __func__);
> >>> + return -EINVAL;
> >>> + }
> >>> +
> >>> + phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> >>> + if (!phy_mem) {
> >>> + dev_err(dev, "%s: missing mem resource\n", __func__);
> >>> + return -ENODEV;
> >>> + }
> >>> +
> >>> + phy_base = devm_request_and_ioremap(dev, phy_mem);
> >>> + if (!phy_base) {
> >>> + dev_err(dev, "%s: register mapping failed\n", __func__);
> >>> + return -ENXIO;
> >>> + }
> >>> +
> >>> + sec = devm_kzalloc(dev, sizeof(*sec), GFP_KERNEL);
> >>> + if (!sec)
> >>> + return -ENOMEM;
> >>> +
> >>> + sec->dev = &pdev->dev;
> >>> + sec->plat = pdata;
> >>> + sec->regs = phy_base;
> >>> + sec->phy.dev = sec->dev;
> >>> + sec->phy.label = "sec-usbphy";
> >>> + sec->phy.init = sec_usbphy_init;
> >>> + sec->phy.shutdown = sec_usbphy_shutdown;
> >>> + sec->cpu_type = sec_usbphy_get_driver_data(pdev);
> >>> +
> >>> + ret = usb_add_phy(&sec->phy, USB_PHY_TYPE_USB2);
> >>> + if (ret)
> >>> + goto err;
> >>> +
> >>> + platform_set_drvdata(pdev, sec);
> >>> +
> >>> + dev_info(&pdev->dev, "Initialized samsung USB OTG PHY module\n");
> >>> +err:
> >>> + return ret;
> >>> +}
> >>> +
> >>> +static int __exit sec_usbphy_remove(struct platform_device *pdev)
> >>> +{
> >>> + struct sec_usbphy *sec = platform_get_drvdata(pdev);
> >>> +
> >>> + usb_remove_phy(&sec->phy);
> >>> +
> >>> + if (sec->clk) {
> >>> + clk_put(sec->clk);
> >>> + sec->clk = NULL;
> >>> + }
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> +#ifdef CONFIG_OF
> >>> +static const struct of_device_id sec_usbphy_dt_match[] = {
> >>> + {
> >>> + .compatible = "samsung,s3c64xx-usbphy",
> >>> + .data = (void *)TYPE_S3C64XX,
> >>> + }, {
> >>> + .compatible = "samsung,exynos4210-usbphy",
> >>> + .data = (void *)TYPE_EXYNOS4210,
> >>> + },
> >>> + {},
> >>> +};
> >>> +MODULE_DEVICE_TABLE(of, sec_usbphy_dt_match);
> >>> +#else
> >>> +#define sec_usbphy_dt_match NULL
> >>> +#endif
> >>> +
> >>> +static struct platform_device_id sec_usbphy_driver_ids[] = {
> >>> + {
> >>> + .name = "s3c64xx-usbphy",
> >>> + .driver_data = TYPE_S3C64XX,
> >>> + }, {
> >>> + .name = "exynos4210-usbphy",
> >>> + .driver_data = TYPE_EXYNOS4210,
> >>> + },
> >>> + {},
> >>> +};
> >>> +
> >>> +MODULE_DEVICE_TABLE(platform, sec_usbphy_driver_ids);
> >>> +
> >>> +static struct platform_driver sec_usbphy_driver = {
> >>> + .probe = sec_usbphy_probe,
> >>> + .remove = __devexit_p(sec_usbphy_remove),
> >>> + .id_table = sec_usbphy_driver_ids,
> >>> + .driver = {
> >>> + .name = "sec-usbphy",
> >>> + .owner = THIS_MODULE,
> >>> + .of_match_table = sec_usbphy_dt_match,
> >>> + },
> >>> +};
> >>> +
> >>> +static int __init sec_usbphy_driver_init(void)
> >>> +{
> >>> + return platform_driver_register(&sec_usbphy_driver);
> >>> +}
> >>> +subsys_initcall(sec_usbphy_driver_init);
> >>> +
> >>> +static void __exit sec_usbphy_driver_exit(void)
> >>> +{
> >>> + return platform_driver_unregister(&sec_usbphy_driver);
> >>> +}
> >>> +module_exit(sec_usbphy_driver_exit);
> >>> +
> >>> +MODULE_DESCRIPTION("Samsung USB phy controller");
> >>> +MODULE_AUTHOR("Praveen Paneri <p.paneri at samsung.com>");
> >>> +MODULE_LICENSE("GPL");
> >>> +MODULE_ALIAS("platform:sec-usbphy");
> >>> diff --git a/drivers/usb/phy/sec_usbphy.h
> >>> b/drivers/usb/phy/sec_usbphy.h new file mode 100644
> >>> index 0000000..06e81d4
> >>> --- /dev/null
> >>> +++ b/drivers/usb/phy/sec_usbphy.h
> >>> @@ -0,0 +1,48 @@
> >>> +/*
> >>> + * Copyright (C) 2012 Samsung Electronics Co.Ltd
> >>> + * Author: Yulgon Kim <yulgon.kim at samsung.com>
> >>> + * Author: Joonyoung Shim <jy0922.shim at samsung.com>
> >>> + * Author: Praveen Paneri <p.paneri at samsung.com>
> >>> + *
> >>> + * This program is free software; you can redistribute it and/or
> >>> modify
> >>> it + * under the terms of the GNU General Public License as
> >>> published by the + * Free Software Foundation; either version 2 of
> >>> the License, or
> >>> (at your + * option) any later version.
> >>> + */
> >>> +
> >>> +#ifndef __SEC_USBPHY_H
> >>> +#define __SEC_USBPHY_H
> >>> +
> >>> +#define S3C_PHYPWR (0x00)
> >>> +
> >>> +#define S3C_PHYPWR_NORMAL_MASK (0x19 << 0)
> >>> +#define S3C_PHYPWR_OTG_DISABLE (1 << 4)
> >>> +#define S3C_PHYPWR_ANALOG_POWERDOWN (1 << 3)
> >>> +#define S3C_PHYPWR_FORCE_SUSPEND (1 << 1)
> >>> +/* For Exynos4 */
> >>> +#define EXYNOS4_PHYPWR_NORMAL_MASK (0x39 << 0)
> >>> +#define EXYNOS4_PHYPWR_SLEEP (1 << 5)
> >>> +
> >>> +#define S3C_PHYCLK (0x04)
> >>> +
> >>> +#define S3C_PHYCLK_MODE_SERIAL (1 << 6)
> >>> +#define S3C_PHYCLK_EXT_OSC (1 << 5)
> >>> +#define S3C_PHYCLK_COMMON_ON_N (1 << 4)
> >>> +#define S3C_PHYCLK_ID_PULL (1 << 2)
> >>> +#define S3C_PHYCLK_CLKSEL_MASK (0x3 << 0)
> >>> +#define S3C_PHYCLK_CLKSEL_SHIFT (0)
> >>> +#define S3C_PHYCLK_CLKSEL_48M (0x0 << 0)
> >>> +#define S3C_PHYCLK_CLKSEL_12M (0x2 << 0)
> >>> +#define S3C_PHYCLK_CLKSEL_24M (0x3 << 0)
> >>> +
> >>> +#define S3C_RSTCON (0x08)
> >>> +
> >>> +#define S3C_RSTCON_PHYCLK (1 << 2)
> >>> +#define S3C_RSTCON_HCLK (1 << 1)
> >>> +#define S3C_RSTCON_PHY (1 << 0)
> >>> +
> >>> +#ifndef MHZ
> >>> +#define MHZ (1000*1000)
> >>> +#endif
> >>> +
> >>> +#endif /* __SEC_USBPHY_H */
> >>> diff --git a/include/linux/platform_data/s3c-hsotg.h
> >>> b/include/linux/platform_data/s3c-hsotg.h index 8b79e09..25ed31e 100644
> >>> --- a/include/linux/platform_data/s3c-hsotg.h
> >>> +++ b/include/linux/platform_data/s3c-hsotg.h
> >>> @@ -35,6 +35,11 @@ struct s3c_hsotg_plat {
> >>>
> >>> int (*phy_exit)(struct platform_device *pdev, int type);
> >>>
> >>> };
> >>>
> >>> +struct s3c_usbphy_plat {
> >>> + void (*pmu_isolation)(int on);
> >>> +};
> >>> +
> >>>
> >>> extern void s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd);
> >>>
> >>> +extern void s3c_usbphy_set_platdata(struct s3c_usbphy_plat *pd);
> >>>
> >>> #endif /* __LINUX_USB_S3C_HSOTG_H */
> >>
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> >> the body of a message to majordomo at vger.kernel.org
> >> More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe
> > linux-samsung-soc" in
> > the body of a message to majordomo at vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
More information about the linux-arm-kernel
mailing list