[PATCH] pwm: Call pwm_enable() before pwm_config()

[Jingoo Han]

On Friday, August 24, 2012 12:44 AM, Lars-Peter Clausen wrote:
> 
> On 08/23/2012 04:19 PM, Benoît Thébaudeau wrote:
> > Some PWM drivers enable the clock of the PWM peripheral in pwm_enable(). Hence,
> > for these drivers, a call to pwm_config() does not have any effect before
> > pwm_enable() has been called.
> >
> > This patch fixes the PWM users to make sure that they call pwm_enable() before
> > pwm_config().
> >
> > This fixes the first setting of brightness through sysfs that had no effect with
> > leds-pwm and the i.MX PWM driver.
> 
> But isn't this a bug in the PWM peripheral driver? With this change the PWM
> will start with the old settings first. While this is not so much of a problem
> for a backlight (although it might cause a short flickering) it might cause
> problems for other applications, like using the PWM pin as a timing generator.
> In my opinion it's better to fix the PWM peripheral drivers which have this
> problem instead of trying to work around it in every user of the PWM API.

Hi Lars-Peter Clausen,

I think so.
It would be better to fix the PWM peripheral drivers.


Best regards,
Jingoo Han

> 
> - Lars
> --
> To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html