[PATCH 0/9] ARM perf updates for 3.7

[Hui Wang]

Will Deacon wrote:
> On Mon, Aug 13, 2012 at 10:11:37AM +0100, Hui Wang wrote:
>   
>> Hi Will Deacon,
>>     
>
> Hello,
>
>   
>> For SMP platforms, each CPU core has an independent PMU, and each PMU 
>> has a dedicated irq (SPI or PPI). Current perf subsystem framework only 
>> supports each PMU to have a dedicated SPI irq, and it will support each 
>> PMU to have a PPI irq (i have seen someone has sent out the patches), 
>> but there is a situation the subsystem doesn't support yet, the 
>> situation is multi PMUs share one same SPI irq, e.g. the i.MX6Quad CPU 
>> has 4 cortex-a9 cores, each core has a PMU, all PMU irqs are routed 
>> (ORed) to one SPI irq, do you know how to support this situation?
>>     
>
> That's what I like to call a braindead, broken system. Seriously, CPU PMU
> interrupts *can only* be handled on the CPU which raised them -- ORing these
> things together means ping-ponging the interrupt affinity around until we
> find the right guy. There's also the fun case where multiple PMUs assert
> simultaneously and I've even heard about platforms where they OR in the
> bloody L2 PMU interrupt as well for good measure!
>
> If you have to support such a device, take a look at the ux500 code
> (db8500_pmu_handler), but please take all of your profiling numbers with a
> pinch of salt. For a quad-core processor, the numbers will probably be even
> less accurate.
>
> Also, please go ahead and inflict sufficient injuries to your hardware guys
> that they stop this madness!
>   
Got it, thanks for the information, it is very useful.

Regards,
Hui.


> Will
>
>