[PATCH v6 01/10] ARM: OMAP2+: nand: unify init functions
Afzal Mohammed
afzal at ti.com
Tue Aug 21 06:45:07 EDT 2012
Helper function for updating nand platform data has been
added the capability to take timing structure arguement.
Usage of omap_nand_flash_init() has been replaced by modifed
one, omap_nand_flash_init was doing things similar to
board_nand_init except that NAND CS# were being acquired
based on bootloader setting. As CS# is hardwired for a given
board, acquiring gpmc CS# has been removed, and updated with
the value on board.
NAND CS# used in beagle board & omap3evm was found to be CS0.
Thomas Weber <thomas.weber.linux at googlemail.com> reported
that value of devkit8000 to be CS0. Overo board was found
to be using CS0 based on u-boot, while google grep says
omap3touchbook too has CS0.
Signed-off-by: Afzal Mohammed <afzal at ti.com>
Reviewed-by: Jon Hunter <jon-hunter at ti.com>
---
v6: Modify nand init for OMAP3EVM too as support got added
arch/arm/mach-omap2/board-devkit8000.c | 8 ++++-
arch/arm/mach-omap2/board-flash.c | 45 ++++++++++++++-------------
arch/arm/mach-omap2/board-flash.h | 6 ++-
arch/arm/mach-omap2/board-igep0020.c | 2 +-
arch/arm/mach-omap2/board-ldp.c | 4 +-
arch/arm/mach-omap2/board-omap3beagle.c | 8 ++++-
arch/arm/mach-omap2/board-omap3evm.c | 8 ++++-
arch/arm/mach-omap2/board-omap3touchbook.c | 8 ++++-
arch/arm/mach-omap2/board-overo.c | 7 +++-
arch/arm/mach-omap2/board-zoom.c | 5 ++-
arch/arm/mach-omap2/common-board-devices.c | 46 ----------------------------
arch/arm/mach-omap2/common-board-devices.h | 1 -
12 files changed, 62 insertions(+), 86 deletions(-)
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 6567c1c..6ee429a 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -59,8 +59,11 @@
#include "mux.h"
#include "hsmmc.h"
+#include "board-flash.h"
#include "common-board-devices.h"
+#define NAND_CS 0
+
#define OMAP_DM9000_GPIO_IRQ 25
#define OMAP3_DEVKIT_TS_GPIO 27
@@ -628,8 +631,9 @@ static void __init devkit8000_init(void)
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
- omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions,
- ARRAY_SIZE(devkit8000_nand_partitions));
+ board_nand_init(devkit8000_nand_partitions,
+ ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS,
+ NAND_BUSWIDTH_16, NULL);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index 53c39d2..47fb903 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -103,41 +103,41 @@ __init board_onenand_init(struct mtd_partition *onenand_parts,
defined(CONFIG_MTD_NAND_OMAP2_MODULE)
/* Note that all values in this struct are in nanoseconds */
-static struct gpmc_timings nand_timings = {
+struct gpmc_timings nand_default_timings[1] = {
+ {
+ .sync_clk = 0,
- .sync_clk = 0,
+ .cs_on = 0,
+ .cs_rd_off = 36,
+ .cs_wr_off = 36,
- .cs_on = 0,
- .cs_rd_off = 36,
- .cs_wr_off = 36,
+ .adv_on = 6,
+ .adv_rd_off = 24,
+ .adv_wr_off = 36,
- .adv_on = 6,
- .adv_rd_off = 24,
- .adv_wr_off = 36,
+ .we_off = 30,
+ .oe_off = 48,
- .we_off = 30,
- .oe_off = 48,
+ .access = 54,
+ .rd_cycle = 72,
+ .wr_cycle = 72,
- .access = 54,
- .rd_cycle = 72,
- .wr_cycle = 72,
-
- .wr_access = 30,
- .wr_data_mux_bus = 0,
+ .wr_access = 30,
+ .wr_data_mux_bus = 0,
+ },
};
-static struct omap_nand_platform_data board_nand_data = {
- .gpmc_t = &nand_timings,
-};
+static struct omap_nand_platform_data board_nand_data;
void
-__init board_nand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs, int nand_type)
+__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
+ int nand_type, struct gpmc_timings *gpmc_t)
{
board_nand_data.cs = cs;
board_nand_data.parts = nand_parts;
board_nand_data.nr_parts = nr_parts;
board_nand_data.devsize = nand_type;
+ board_nand_data.gpmc_t = gpmc_t;
board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
@@ -238,5 +238,6 @@ void __init board_flash_init(struct flash_partitions partition_info[],
pr_err("NAND: Unable to find configuration in GPMC\n");
else
board_nand_init(partition_info[2].parts,
- partition_info[2].nr_parts, nandcs, nand_type);
+ partition_info[2].nr_parts, nandcs,
+ nand_type, nand_default_timings);
}
diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h
index c44b70d..a3aa5fc 100644
--- a/arch/arm/mach-omap2/board-flash.h
+++ b/arch/arm/mach-omap2/board-flash.h
@@ -40,12 +40,14 @@ static inline void board_flash_init(struct flash_partitions part[],
#if defined(CONFIG_MTD_NAND_OMAP2) || \
defined(CONFIG_MTD_NAND_OMAP2_MODULE)
extern void board_nand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs, int nand_type);
+ u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t);
+extern struct gpmc_timings nand_default_timings[];
#else
static inline void board_nand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs, int nand_type)
+ u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t)
{
}
+#define nand_default_timings NULL
#endif
#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 2821448..b7401f7 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -175,7 +175,7 @@ static void __init igep_flash_init(void)
pr_info("IGEP: initializing NAND memory device\n");
board_nand_init(igep_flash_partitions,
ARRAY_SIZE(igep_flash_partitions),
- 0, NAND_BUSWIDTH_16);
+ 0, NAND_BUSWIDTH_16, nand_default_timings);
} else if (mux == IGEP_SYSBOOT_ONENAND) {
pr_info("IGEP: initializing OneNAND memory device\n");
board_onenand_init(igep_flash_partitions,
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index ef9e829..5d8fa99 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -427,8 +427,8 @@ static void __init omap_ldp_init(void)
omap_serial_init();
omap_sdrc_init(NULL, NULL);
usb_musb_init(NULL);
- board_nand_init(ldp_nand_partitions,
- ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
+ board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
+ ZOOM_NAND_CS, 0, nand_default_timings);
omap_hsmmc_init(mmc);
ldp_display_init();
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 6202fc7..940ab49 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -51,8 +51,11 @@
#include "mux.h"
#include "hsmmc.h"
#include "pm.h"
+#include "board-flash.h"
#include "common-board-devices.h"
+#define NAND_CS 0
+
/*
* OMAP3 Beagle revision
* Run time detection of Beagle revision is done by reading GPIO.
@@ -517,8 +520,9 @@ static void __init omap3_beagle_init(void)
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
- omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
- ARRAY_SIZE(omap3beagle_nand_partitions));
+ board_nand_init(omap3beagle_nand_partitions,
+ ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS,
+ NAND_BUSWIDTH_16, NULL);
/* Ensure msecure is mux'd to be able to set the RTC. */
omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH);
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 0d362e9..833c42c 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -57,6 +57,9 @@
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
#include "common-board-devices.h"
+#include "board-flash.h"
+
+#define NAND_CS 0
#define OMAP3_EVM_TS_GPIO 175
#define OMAP3_EVM_EHCI_VBUS 22
@@ -730,8 +733,9 @@ static void __init omap3_evm_init(void)
}
usb_musb_init(&musb_board_data);
usbhs_init(&usbhs_bdata);
- omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions,
- ARRAY_SIZE(omap3evm_nand_partitions));
+ board_nand_init(omap3evm_nand_partitions,
+ ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS,
+ NAND_BUSWIDTH_16, NULL);
omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
omap3evm_init_smsc911x();
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 485d14d..75e07f6 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -52,6 +52,7 @@
#include "mux.h"
#include "hsmmc.h"
+#include "board-flash.h"
#include "common-board-devices.h"
#include <asm/setup.h>
@@ -61,6 +62,8 @@
#define TB_BL_PWM_TIMER 9
#define TB_KILL_POWER_GPIO 168
+#define NAND_CS 0
+
static unsigned long touchbook_revision;
static struct mtd_partition omap3touchbook_nand_partitions[] = {
@@ -370,8 +373,9 @@ static void __init omap3_touchbook_init(void)
omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
- omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions,
- ARRAY_SIZE(omap3touchbook_nand_partitions));
+ board_nand_init(omap3touchbook_nand_partitions,
+ ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS,
+ NAND_BUSWIDTH_16, NULL);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 779734d..56d5b9e 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -57,8 +57,11 @@
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
+#include "board-flash.h"
#include "common-board-devices.h"
+#define NAND_CS 0
+
#define OVERO_GPIO_BT_XGATE 15
#define OVERO_GPIO_W2W_NRESET 16
#define OVERO_GPIO_PENDOWN 114
@@ -500,8 +503,8 @@ static void __init overo_init(void)
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
- omap_nand_flash_init(0, overo_nand_partitions,
- ARRAY_SIZE(overo_nand_partitions));
+ board_nand_init(overo_nand_partitions,
+ ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
overo_spi_init();
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 4e7e561..a04dd85 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -114,8 +114,9 @@ static void __init omap_zoom_init(void)
usbhs_init(&usbhs_bdata);
}
- board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions),
- ZOOM_NAND_CS, NAND_BUSWIDTH_16);
+ board_nand_init(zoom_nand_partitions,
+ ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS,
+ NAND_BUSWIDTH_16, nand_default_timings);
zoom_debugboard_init();
zoom_peripherals_init();
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index c187586..3aef3a9 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -95,49 +95,3 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
{
}
#endif
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-static struct omap_nand_platform_data nand_data;
-
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
- int nr_parts)
-{
- u8 cs = 0;
- u8 nandcs = GPMC_CS_NUM + 1;
-
- /* find out the chip-select on which NAND exists */
- while (cs < GPMC_CS_NUM) {
- u32 ret = 0;
- ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
- if ((ret & 0xC00) == 0x800) {
- printk(KERN_INFO "Found NAND on CS%d\n", cs);
- if (nandcs > GPMC_CS_NUM)
- nandcs = cs;
- }
- cs++;
- }
-
- if (nandcs > GPMC_CS_NUM) {
- printk(KERN_INFO "NAND: Unable to find configuration "
- "in GPMC\n ");
- return;
- }
-
- if (nandcs < GPMC_CS_NUM) {
- nand_data.cs = nandcs;
- nand_data.parts = parts;
- nand_data.nr_parts = nr_parts;
- nand_data.devsize = options;
-
- printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
- if (gpmc_nand_init(&nand_data) < 0)
- printk(KERN_ERR "Unable to register NAND device\n");
- }
-}
-#else
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
- int nr_parts)
-{
-}
-#endif
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index a0b4a42..72bb41b 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -10,6 +10,5 @@ struct ads7846_platform_data;
void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
struct ads7846_platform_data *board_pdata);
-void omap_nand_flash_init(int opts, struct mtd_partition *parts, int n_parts);
#endif /* __OMAP_COMMON_BOARD_DEVICES__ */
--
1.7.1
More information about the linux-arm-kernel
mailing list