[PATCH] ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock

[Kukjin Kim]

On 08/27/12 13:12, Sylwester Nawrocki wrote:
> Add missing get_rate callback for the "camif-upll" clock, so frequency
> of this clock is properly reported with clk_get_rate().
>
> Signed-off-by: Sylwester Nawrocki<sylvester.nawrocki at gmail.com>
> ---
>   arch/arm/mach-s3c24xx/clock-s3c2440.c |   14 ++++++++++++++
>   1 files changed, 14 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c
> index cb2883d..749220f 100644
> --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c
> +++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c
> @@ -87,6 +87,19 @@ static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate)
>   	return 0;
>   }
>
> +static unsigned long s3c2440_camif_upll_getrate(struct clk *clk)
> +{
> +	unsigned long parent_rate = clk_get_rate(clk->parent);
> +	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
> +
> +	if (!(camdivn&  S3C2440_CAMDIVN_CAMCLK_SEL))
> +		return parent_rate;
> +
> +	camdivn&= S3C2440_CAMDIVN_CAMCLK_MASK;
> +
> +	return parent_rate / (camdivn + 1) / 2;

Well, why do we need '/ 2' here?

> +}
> +
>   /* Extra S3C2440 clocks */
>
>   static struct clk s3c2440_clk_cam = {
> @@ -99,6 +112,7 @@ static struct clk s3c2440_clk_cam_upll = {
>   	.name		= "camif-upll",
>   	.ops		=&(struct clk_ops) {
>   		.set_rate	= s3c2440_camif_upll_setrate,
> +		.get_rate	= s3c2440_camif_upll_getrate,
>   		.round_rate	= s3c2440_camif_upll_round,
>   	},
>   };

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.