[PATCH] pwm: Call pwm_enable() before pwm_config()

[Lars-Peter Clausen]

On 08/23/2012 06:57 PM, Benoît Thébaudeau wrote:
> On Thursday, August 23, 2012 5:43:32 PM, Lars-Peter Clausen wrote:
>> On 08/23/2012 04:19 PM, Benoît Thébaudeau wrote:
>>> Some PWM drivers enable the clock of the PWM peripheral in
>>> pwm_enable(). Hence,
>>> for these drivers, a call to pwm_config() does not have any effect
>>> before
>>> pwm_enable() has been called.
>>>
>>> This patch fixes the PWM users to make sure that they call
>>> pwm_enable() before
>>> pwm_config().
>>>
>>> This fixes the first setting of brightness through sysfs that had
>>> no effect with
>>> leds-pwm and the i.MX PWM driver.
>>
>> But isn't this a bug in the PWM peripheral driver? With this change
>> the PWM
>> will start with the old settings first. While this is not so much of
>> a problem
>> for a backlight (although it might cause a short flickering) it might
>> cause
>> problems for other applications, like using the PWM pin as a timing
>> generator.
>> In my opinion it's better to fix the PWM peripheral drivers which
>> have this
>> problem instead of trying to work around it in every user of the PWM
>> API.
> 
> I don't know. See my detailed description of this issue here:
> http://lists.infradead.org/pipermail/linux-arm-kernel/2012-August/115667.html
> 
> Where the bug is depends on the detailed definition of the PWM API, which I
> don't find documented anywhere.
> 
> If pwm_enable() means "start PWM timer with the configured settings", then the
> bug is in the drivers. If it means "enable the PWM peripheral so that we can
> work with it", then the bug is in the PWM users.

It really is the former. See the description of pwm_enable() in drivers/pwm/core.c

> 
> I don't really have time to work on this, so I suggested this patch as a simple
> solution. Otherwise, it means reworking several PWM drivers for different
> hardware that is not available to everyone for testing.
> 
> If we decide to only change the i.MX PWM driver, the fix would be:
> pwm_config()
> {
>         save passed config in private data;
>         if (pwm enabled)
>                 apply passed config;
> }
> 
> pwm_enable()
> {
>         if (!(pwm enabled)) {
>                 enable pwm ip clk;
>                 apply config from private data;
>         }
> }

Another option is to enable the clock if it is disabled when the device is
configured. E.g. that's what tegra does.

> 
> If we fix only this driver, we must not forget that the same issue probably
> exists with several other PWM drivers.
> 

Since this seems to be a common pattern in a number of PWM drivers it might
make sense to simply add support for enabling/disabling a clk to the pwm core.
Or maybe just use the runtime pm API for this. This probably makes even more
sense and grab a reference to the pm context when the enable() is called,
release it when disable() is called and also grab it before calling the
device's config callback and release it afterward.

- Lars