[PATCH 3/4] arm/dts: omap5-evm: Add keypad data
Poddar, Sourav
sourav.poddar at ti.com
Tue Aug 7 11:49:15 EDT 2012
Hi Koen,
On Tue, Aug 7, 2012 at 6:24 PM, Koen Kooi <koen at dominion.thruhere.net> wrote:
>
> Op 3 aug. 2012, om 14:38 heeft Sourav Poddar <sourav.poddar at ti.com> het volgende geschreven:
>
>> Add keypad data node in omap5 device tree file.
>> Also fill the device tree binding parameters
>> with the required value in "omap5-evm" dts file.
>>
>> Tested on omap5430 evm with 3.5 custom kernel.
>>
>> Cc: Benoit Cousson <b-cousson at ti.com>
>> Cc: Felipe Balbi <balbi at ti.com>
>> Cc: Santosh Shilimkar <santosh.shilimkar at ti.com>
>> Acked-by: Felipe Balbi <balbi at ti.com>
>> Signed-off-by: Sourav Poddar <sourav.poddar at ti.com>
>> ---
>> arch/arm/boot/dts/omap5-evm.dts | 12 ++++++++++++
>> arch/arm/boot/dts/omap5.dtsi | 5 +++++
>> 2 files changed, 17 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts
>> index 45a8aeb..09fe941 100644
>> --- a/arch/arm/boot/dts/omap5-evm.dts
>> +++ b/arch/arm/boot/dts/omap5-evm.dts
>> @@ -17,6 +17,18 @@
>> device_type = "memory";
>> reg = <0x80000000 0x40000000>; /* 1 GB */
>> };
>> +
>> + keypad {
>> + keypad,num-rows = <8>;
>> + keypad,num-columns = <8>;
>> + linux,keymap = < 0x02020073
>> + 0x02030072
>> + 0x020400e7
>> + 0x02050066
>> + 0x0206006b
>> + 0x020700d9 >;
>> + linux,input-no-autorepeat;
>> + };
>
> Again not a coment on your patch, but on DT:
>
> If DT bindings must be OS independent, what then, is that linux keycode doing there?
>
Currently, for all matrix connected keyboards the keymap are defined
in the scope of the
linux key code since that is a stable and standardized interface at this time.
For the above reason , computation of the keymap uses linux keycode
row << 24 | column << 16 | linux-key-code
I think this is the primary reason for keeping "linux" prefix with this
property.
> regards,
>
> Koen
>
More information about the linux-arm-kernel
mailing list