[PATCH v3 4/4] arm/dts: Add tps65217 regulator DT data to am335x-bone.dts

[AnilKumar, Chimata]

Hi Koen,

On Fri, Aug 24, 2012 at 11:58:34, Koen Kooi wrote:
> 
> Op 24 aug. 2012, om 07:50 heeft "AnilKumar, Chimata" <anilkumar at ti.com> het volgende geschreven:
> 
> > Hi Koen,
> > 
> > On Thu, Aug 23, 2012 at 19:43:48, Koen Kooi wrote:
> >> 
> >> Op 21 aug. 2012, om 13:17 heeft AnilKumar Ch <anilkumar at ti.com> het volgende geschreven:
> >> 
> >>> Add tps65217 regulator device tree data to AM335x-Bone by adding
> >>> regulator consumers with tightened constraints and regulator-name.
> >>> TPS65217 regulator handle can be obtained by using this regulator
> >>> name.
> >>> 
> >>> This patch also add I2C node with I2C frequency and tps65217 PMIC
> >>> I2C slave address.
> >>> 
> >>> Signed-off-by: AnilKumar Ch <anilkumar at ti.com>
> >> 
> >> I tried this and the kernel immediately crashes on my beaglebone. Could you upload the complete git tree and .config you used to test this to somewhere public please?
> > 
> > Use this repo to test on beaglebone
> > https://github.com/hvaibhav/am335x-linux/commits/am335x-upstream-staging-pinctrl
> > 
> > This wiki talks about how to build and use?
> > https://github.com/hvaibhav/am335x-linux/wiki/How-To-Use-Upstream-Tree
> > 
> > Note: Enable tps65217 regulator in kernel config.
> 
> I used that repo and as a seperate test I rebased that to latest mainline, same thing: as soon as I turn on the TPS in the .config it crashes on boot. Is the pinctrl repo the *exact* repo you used to test the patches on beaglebone?

I tested on latest mainline after merging to
am335x-upstream-staging-pinctrl (voltage also changing)

Can you share your .config and uImage?

My config details:- (After merge)
1. omap2plus_defconfig
2. Enable tps65217 MFD driver
3. Enable tps65217 regulator driver

Thanks
AnilKumar