[PATCH v2 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
Kukjin Kim
kgene.kim at samsung.com
Tue Aug 7 06:00:04 EDT 2012
Praveen Paneri wrote:
>
> Changes from v1:
> Rebased patches to latest usb-next branch
> Changed the name 'sec_usbphy' to 'samsung_usbphy'
>
Yes, looks better. But I'm not sure Felipe or Greg would prefer to use '_'
not '-'...you used samsung-usbphy as a name in your patch.
> This patch set introduces a phy driver for samsung SoCs. It uses the
> existing
> transceiver infrastructure to provide phy control functions. Use of this
> driver
> can be extended for usb host phy as well. Over the period of time all the
> phy
> related code for most of the samsung SoCs can be integrated here.
> Removing the existing phy code from mach-s3c64xx but not from other
> machine
Why? Is there any reason? After quick looking at your patches, seems this
can remove all of setup-usb-phy in arch/arm/ for Samsung stuff. In addition,
the isolation hook function also can be put in this by using platform_data
or dt parsing.
> code.This driver is tested with smdk6410 and Exynos4210(with DT).
>
I and my colleague, Yulgon will comment on this series soon.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
> Praveen Paneri (5):
> usb: phy: samsung: Introducing usb phy driver for hsotg
> usb: s3c-hsotg: Adding phy driver support
> ARM: S3C64XX: Removing old phy setup code
> ARM: S3C64XX: Enabling samsung_usbphy driver
> ARM: Exynos4210: Enabling samsung_usbphy driver
>
> .../devicetree/bindings/usb/samsung-usbphy.txt | 9 +
> arch/arm/boot/dts/exynos4210.dtsi | 5 +
> arch/arm/mach-exynos/include/mach/map.h | 1 +
> arch/arm/mach-exynos/mach-exynos4-dt.c | 8 +
> arch/arm/mach-exynos/setup-usb-phy.c | 13 +
> arch/arm/mach-s3c64xx/include/mach/map.h | 2 +
> arch/arm/mach-s3c64xx/mach-crag6410.c | 5 +-
> arch/arm/mach-s3c64xx/mach-smartq.c | 6 +-
> arch/arm/mach-s3c64xx/mach-smdk6410.c | 5 +-
> arch/arm/mach-s3c64xx/setup-usb-phy.c | 79 +----
> arch/arm/plat-samsung/devs.c | 32 ++
> arch/arm/plat-samsung/include/plat/devs.h | 1 +
> arch/arm/plat-samsung/include/plat/usb-phy.h | 1 +
> drivers/usb/gadget/s3c-hsotg.c | 38 ++-
> drivers/usb/phy/Kconfig | 8 +
> drivers/usb/phy/Makefile | 1 +
> drivers/usb/phy/samsung_usbphy.c | 355
++++++++++++++++++++
> drivers/usb/phy/samsung_usbphy.h | 48 +++
> include/linux/platform_data/s3c-hsotg.h | 5 +
> 19 files changed, 534 insertions(+), 88 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/usb/samsung-
> usbphy.txt
> create mode 100644 drivers/usb/phy/samsung_usbphy.c
> create mode 100644 drivers/usb/phy/samsung_usbphy.h
More information about the linux-arm-kernel
mailing list