[PATCH v2 5/8] ARM/dts: OMAP5: Add McBSP entries

[Peter Ujfalusi]

Create the sections describing the McBSP ports to be able to use them via
DT.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
---
 arch/arm/boot/dts/omap5.dtsi |   36 ++++++++++++++++++++++++++++++++++++
 1 files changed, 36 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 881d60c..57ca7c1 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -211,5 +211,41 @@
 			ti,hwmods = "mmc5";
 			ti,needs-special-reset;
 		};
+
+		mcbsp1: mcbsp at 40122000 {
+			compatible = "ti,omap4-mcbsp";
+			reg = <0x40122000 0xff>, /* MPU private access */
+			      <0x49022000 0xff>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <0 17 0x4>;
+			interrupt-names = "common";
+			interrupt-parent = <&gic>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp1";
+		};
+
+		mcbsp2: mcbsp at 40124000 {
+			compatible = "ti,omap4-mcbsp";
+			reg = <0x40124000 0xff>, /* MPU private access */
+			      <0x49024000 0xff>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <0 22 0x4>;
+			interrupt-names = "common";
+			interrupt-parent = <&gic>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp2";
+		};
+
+		mcbsp3: mcbsp at 40126000 {
+			compatible = "ti,omap4-mcbsp";
+			reg = <0x40126000 0xff>, /* MPU private access */
+			      <0x49026000 0xff>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <0 23 0x4>;
+			interrupt-names = "common";
+			interrupt-parent = <&gic>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp3";
+		};
 	};
 };
-- 
1.7.8.6