[PATCH 1/8] arm: sam9_l9260_defconfig: adjust UBI bad eraseblocks limit

Richard Genoud richard.genoud at gmail.com
Fri Aug 17 10:35:17 EDT 2012


From: Artem Bityutskiy <artem.bityutskiy at linux.intel.com>

UBI has changed the MTD_UBI_BEB_LIMIT semantics. It used to be a percent of
total amount of eraseblock in the partition, and now it is the maximum
amount of bad eraseblocks on the entire devise per 1024 eraseblocks. So not
only the units changed, but also the meaning. But anyway, old 3% roughly
correspond to new 30, so change the defconfig correspondingly.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy at linux.intel.com>
---
 arch/arm/configs/sam9_l9260_defconfig |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig
index da276f9..d11fea5 100644
--- a/arch/arm/configs/sam9_l9260_defconfig
+++ b/arch/arm/configs/sam9_l9260_defconfig
@@ -39,7 +39,7 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_NAND_PLATFORM=y
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=3
+CONFIG_MTD_UBI_BEB_LIMIT=30
 CONFIG_MTD_UBI_GLUEBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
-- 
1.7.2.5




More information about the linux-arm-kernel mailing list