[PATCH v3 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
Praveen Paneri
p.paneri at samsung.com
Wed Aug 8 03:40:57 EDT 2012
This driver uses usb_phy interface to interact with s3c-hsotg. Supports
phy_init and phy_shutdown functions to enable/disable phy. Tested with
smdk6410 and smdkv310. More SoCs can be brought under later.
Signed-off-by: Praveen Paneri <p.paneri at samsung.com>
Acked-by: Heiko Stuebner <heiko at sntech.de>
---
.../devicetree/bindings/usb/samsung-usbphy.txt | 9 +
drivers/usb/phy/Kconfig | 8 +
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/samsung-usbphy.c | 355 ++++++++++++++++++++
drivers/usb/phy/samsung-usbphy.h | 48 +++
include/linux/platform_data/samsung-usbphy.h | 27 ++
6 files changed, 448 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/samsung-usbphy.txt
create mode 100644 drivers/usb/phy/samsung-usbphy.c
create mode 100644 drivers/usb/phy/samsung-usbphy.h
create mode 100644 include/linux/platform_data/samsung-usbphy.h
diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
new file mode 100644
index 0000000..fefd9c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
@@ -0,0 +1,9 @@
+* Samsung's usb phy transceiver
+
+The Samsung's phy transceiver is used for controlling usb otg phy for
+s3c-hsotg usb device controller.
+
+Required properties:
+- compatible : should be "samsung,exynos4210-usbphy"
+- reg : base physical address of the phy registers and length of memory mapped
+ region.
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index e7cf84f..d916477 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -15,3 +15,11 @@ config USB_ISP1301
To compile this driver as a module, choose M here: the
module will be called isp1301.
+
+config SAMSUNG_USBPHY
+ bool "Samsung USB PHY controller Driver"
+ depends on USB_S3C_HSOTG
+ select USB_OTG_UTILS
+ help
+ Enable this to support Samsung USB phy controller for samsung
+ SoCs.
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index eca095b..dfca70d 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -5,3 +5,4 @@
ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
obj-$(CONFIG_USB_ISP1301) += isp1301.o
+obj-$(CONFIG_SAMSUNG_USBPHY) += samsung-usbphy.o
diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c
new file mode 100644
index 0000000..daefec6
--- /dev/null
+++ b/drivers/usb/phy/samsung-usbphy.c
@@ -0,0 +1,355 @@
+/* linux/drivers/usb/phy/samsung-usbphy.c
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Author: Praveen Paneri <p.paneri at samsung.com>
+ *
+ * Samsung USB2.0 High-speed OTG transceiver, talks to S3C HS OTG controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/usb/otg.h>
+#include <linux/platform_data/samsung-usbphy.h>
+
+#include "samsung-usbphy.h"
+
+enum samsung_cpu_type {
+ TYPE_S3C64XX,
+ TYPE_EXYNOS4210,
+};
+
+/*
+ * struct samsung_usbphy - transceiver driver state
+ * @phy: transceiver structure
+ * @plat: platform data
+ * @dev: The parent device supplied to the probe function
+ * @clk: usb phy clock
+ * @regs: usb phy register memory base
+ * @cpu_type: machine identifier
+ */
+struct samsung_usbphy {
+ struct usb_phy phy;
+ struct samsung_usbphy_data *plat;
+ struct device *dev;
+ struct clk *clk;
+ void __iomem *regs;
+ int cpu_type;
+};
+
+#define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy)
+
+/*
+ * Enables or disables the phy clock
+ * returns 0 on success else the error
+ */
+static int samsung_usbphy_clk_control(struct samsung_usbphy *sphy, bool on)
+{
+ if (on) {
+ if (!sphy->clk) {
+ sphy->clk = clk_get(sphy->dev, "otg");
+ if (IS_ERR(sphy->clk)) {
+ dev_err(sphy->dev, "Failed to get otg clock\n");
+ return PTR_ERR(sphy->clk);
+ }
+ }
+ clk_enable(sphy->clk);
+ } else {
+ clk_disable(sphy->clk);
+ clk_put(sphy->clk);
+ }
+
+ return 0;
+}
+
+/*
+ * Returns reference clock frequency
+ */
+static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
+{
+ struct clk *ref_clk;
+ int refclk_freq = 0;
+
+ ref_clk = clk_get(sphy->dev, "xusbxti");
+ if (IS_ERR(ref_clk)) {
+ dev_err(sphy->dev, "Failed to get reference clock\n");
+ return PTR_ERR(ref_clk);
+ }
+
+ switch (clk_get_rate(ref_clk)) {
+ case 12 * MHZ:
+ refclk_freq |= S3C_PHYCLK_CLKSEL_12M;
+ break;
+ case 24 * MHZ:
+ refclk_freq |= S3C_PHYCLK_CLKSEL_24M;
+ break;
+ default:
+ case 48 * MHZ:
+ /* default reference clock */
+ refclk_freq |= S3C_PHYCLK_CLKSEL_48M;
+ break;
+ }
+ clk_put(ref_clk);
+
+ return refclk_freq;
+}
+
+static void samsung_usbphy_enable(struct samsung_usbphy *sphy)
+{
+ void __iomem *regs = sphy->regs;
+ u32 phypwr;
+ u32 phyclk;
+ u32 rstcon;
+
+ /* set clock frequency for PLL */
+ phyclk = samsung_usbphy_get_refclk_freq(sphy);
+ phypwr = readl(regs + S3C_PHYPWR);
+ rstcon = readl(regs + S3C_RSTCON);
+
+ switch (sphy->cpu_type) {
+ case TYPE_S3C64XX:
+ phyclk &= ~(S3C_PHYCLK_COMMON_ON_N);
+ phypwr &= ~S3C_PHYPWR_NORMAL_MASK;
+ rstcon |= S3C_RSTCON_PHY;
+ break;
+ case TYPE_EXYNOS4210:
+ phypwr &= ~EXYNOS4_PHYPWR_NORMAL_MASK;
+ rstcon |= S3C_RSTCON_PHY;
+ default:
+ break;
+ }
+
+ writel(phyclk, regs + S3C_PHYCLK);
+ /* set to normal of PHY0 */
+ writel(phypwr, regs + S3C_PHYPWR);
+ /* reset all ports of PHY and Link */
+ writel(rstcon, regs + S3C_RSTCON);
+ udelay(10);
+ rstcon &= ~S3C_RSTCON_PHY;
+ writel(rstcon, regs + S3C_RSTCON);
+}
+
+static void samsung_usbphy_disable(struct samsung_usbphy *sphy)
+{
+ void __iomem *regs = sphy->regs;
+ u32 phypwr;
+
+ phypwr = readl(regs + S3C_PHYPWR);
+
+ switch (sphy->cpu_type) {
+ case TYPE_S3C64XX:
+ phypwr |= S3C_PHYPWR_NORMAL_MASK;
+ break;
+ case TYPE_EXYNOS4210:
+ phypwr |= EXYNOS4_PHYPWR_NORMAL_MASK;
+ default:
+ break;
+ }
+
+ /* unset to normal of PHY0 */
+ writel(phypwr, regs + S3C_PHYPWR);
+}
+
+/*
+ * The function passed to the usb driver for phy initialization
+ */
+static int samsung_usbphy_init(struct usb_phy *phy)
+{
+ struct samsung_usbphy *sphy;
+ int ret = 0;
+
+ sphy = phy_to_sphy(phy);
+
+ /* Enable the phy clock */
+ ret = samsung_usbphy_clk_control(sphy, true);
+ if (ret) {
+ dev_err(sphy->dev, "phy clock enable failed\n");
+ return ret;
+ }
+
+ /* Disable phy isolation */
+ if (sphy->plat && sphy->plat->pmu_isolation)
+ sphy->plat->pmu_isolation(false);
+
+ /* Initialize usb phy registers */
+ samsung_usbphy_enable(sphy);
+ return ret;
+}
+
+/*
+ * The function passed to the usb driver for phy shutdown
+ */
+static void samsung_usbphy_shutdown(struct usb_phy *phy)
+{
+ struct samsung_usbphy *sphy;
+
+ sphy = phy_to_sphy(phy);
+
+ /* De-initialize usb phy registers */
+ samsung_usbphy_disable(sphy);
+
+ /* Enable phy isolation */
+ if (sphy->plat && sphy->plat->pmu_isolation)
+ sphy->plat->pmu_isolation(true);
+
+ /* Disable the phy clock */
+ samsung_usbphy_clk_control(sphy, false);
+}
+
+static const struct of_device_id samsung_usbphy_dt_match[];
+
+static inline int samsung_usbphy_get_driver_data(struct platform_device *pdev)
+{
+#ifdef CONFIG_OF
+ int data;
+ if (pdev->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_node(samsung_usbphy_dt_match,
+ pdev->dev.of_node);
+ data = (int) match->data;
+ return data;
+ }
+#endif
+ return platform_get_device_id(pdev)->driver_data;
+}
+
+static int __devinit samsung_usbphy_probe(struct platform_device *pdev)
+{
+ struct samsung_usbphy *sphy;
+ struct samsung_usbphy_data *pdata;
+ struct device *dev = &pdev->dev;
+ struct resource *phy_mem;
+ void __iomem *phy_base;
+ int ret;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "%s: no platform data defined\n", __func__);
+ return -EINVAL;
+ }
+
+ phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!phy_mem) {
+ dev_err(dev, "%s: missing mem resource\n", __func__);
+ return -ENODEV;
+ }
+
+ phy_base = devm_request_and_ioremap(dev, phy_mem);
+ if (!phy_base) {
+ dev_err(dev, "%s: register mapping failed\n", __func__);
+ return -ENXIO;
+ }
+
+ sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
+ if (!sphy)
+ return -ENOMEM;
+
+ sphy->dev = &pdev->dev;
+ sphy->plat = pdata;
+ sphy->regs = phy_base;
+ sphy->phy.dev = sphy->dev;
+ sphy->phy.label = "samsung-usbphy";
+ sphy->phy.init = samsung_usbphy_init;
+ sphy->phy.shutdown = samsung_usbphy_shutdown;
+ sphy->cpu_type = samsung_usbphy_get_driver_data(pdev);
+
+ ret = usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2);
+ if (ret)
+ goto err;
+
+ platform_set_drvdata(pdev, sphy);
+
+ dev_info(&pdev->dev, "Initialized samsung USB OTG PHY module\n");
+err:
+ return ret;
+}
+
+static int __exit samsung_usbphy_remove(struct platform_device *pdev)
+{
+ struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
+
+ usb_remove_phy(&sphy->phy);
+
+ if (sphy->clk) {
+ clk_put(sphy->clk);
+ sphy->clk = NULL;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id samsung_usbphy_dt_match[] = {
+ {
+ .compatible = "samsung,s3c64xx-usbphy",
+ .data = (void *)TYPE_S3C64XX,
+ }, {
+ .compatible = "samsung,exynos4210-usbphy",
+ .data = (void *)TYPE_EXYNOS4210,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
+#else
+#define samsung_usbphy_dt_match NULL
+#endif
+
+static struct platform_device_id samsung_usbphy_driver_ids[] = {
+ {
+ .name = "s3c64xx-usbphy",
+ .driver_data = TYPE_S3C64XX,
+ }, {
+ .name = "exynos4210-usbphy",
+ .driver_data = TYPE_EXYNOS4210,
+ },
+ {},
+};
+
+MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
+
+static struct platform_driver samsung_usbphy_driver = {
+ .probe = samsung_usbphy_probe,
+ .remove = __devexit_p(samsung_usbphy_remove),
+ .id_table = samsung_usbphy_driver_ids,
+ .driver = {
+ .name = "samsung-usbphy",
+ .owner = THIS_MODULE,
+ .of_match_table = samsung_usbphy_dt_match,
+ },
+};
+
+static int __init samsung_usbphy_driver_init(void)
+{
+ return platform_driver_register(&samsung_usbphy_driver);
+}
+subsys_initcall(samsung_usbphy_driver_init);
+
+static void __exit samsung_usbphy_driver_exit(void)
+{
+ return platform_driver_unregister(&samsung_usbphy_driver);
+}
+module_exit(samsung_usbphy_driver_exit);
+
+MODULE_DESCRIPTION("Samsung USB phy controller");
+MODULE_AUTHOR("Praveen Paneri <p.paneri at samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:samsung-usbphy");
diff --git a/drivers/usb/phy/samsung-usbphy.h b/drivers/usb/phy/samsung-usbphy.h
new file mode 100644
index 0000000..093b1dc
--- /dev/null
+++ b/drivers/usb/phy/samsung-usbphy.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ * Author: Yulgon Kim <yulgon.kim at samsung.com>
+ * Author: Joonyoung Shim <jy0922.shim at samsung.com>
+ * Author: Praveen Paneri <p.paneri at samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __SAMSUNG_USBPHY_H
+#define __SAMSUNG_USBPHY_H
+
+#define S3C_PHYPWR (0x00)
+
+#define S3C_PHYPWR_NORMAL_MASK (0x19 << 0)
+#define S3C_PHYPWR_OTG_DISABLE (1 << 4)
+#define S3C_PHYPWR_ANALOG_POWERDOWN (1 << 3)
+#define S3C_PHYPWR_FORCE_SUSPEND (1 << 1)
+/* For Exynos4 */
+#define EXYNOS4_PHYPWR_NORMAL_MASK (0x39 << 0)
+#define EXYNOS4_PHYPWR_SLEEP (1 << 5)
+
+#define S3C_PHYCLK (0x04)
+
+#define S3C_PHYCLK_MODE_SERIAL (1 << 6)
+#define S3C_PHYCLK_EXT_OSC (1 << 5)
+#define S3C_PHYCLK_COMMON_ON_N (1 << 4)
+#define S3C_PHYCLK_ID_PULL (1 << 2)
+#define S3C_PHYCLK_CLKSEL_MASK (0x3 << 0)
+#define S3C_PHYCLK_CLKSEL_SHIFT (0)
+#define S3C_PHYCLK_CLKSEL_48M (0x0 << 0)
+#define S3C_PHYCLK_CLKSEL_12M (0x2 << 0)
+#define S3C_PHYCLK_CLKSEL_24M (0x3 << 0)
+
+#define S3C_RSTCON (0x08)
+
+#define S3C_RSTCON_PHYCLK (1 << 2)
+#define S3C_RSTCON_HCLK (1 << 1)
+#define S3C_RSTCON_PHY (1 << 0)
+
+#ifndef MHZ
+#define MHZ (1000*1000)
+#endif
+
+#endif /* __SAMSUNG_USBPHY_H */
diff --git a/include/linux/platform_data/samsung-usbphy.h b/include/linux/platform_data/samsung-usbphy.h
new file mode 100644
index 0000000..0749ce1
--- /dev/null
+++ b/include/linux/platform_data/samsung-usbphy.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ * http://www.samsung.com/
+ * Author: Praveen Paneri <p.paneri at samsung.com>
+ *
+ * Defines platform data for samsung usb phy driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __SAMSUNG_USBPHY_PLATFORM_H
+#define __SAMSUNG_USBPHY_PLATFORM_H
+
+/**
+ * samsung_usbphy_data - Platform data for USB PHY driver.
+ * @pmu_isolation: Function to control usb phy isolation in PMU.
+ */
+struct samsung_usbphy_data {
+ void (*pmu_isolation)(int on);
+};
+
+extern void samsung_usbphy_set_pdata(struct samsung_usbphy_data *pd);
+
+#endif /* __SAMSUNG_USBPHY_PLATFORM_H */
--
1.7.1
More information about the linux-arm-kernel
mailing list