PATCH Add support for the Iomega IX2-200 Device Tree

[Andrew Lunn]

Hi Alan
...

> i did what you sujested and all commands worked except for the git
> sendmail part so i do not know if I should still be sending you the
> patch this way but here it is. i also defined the gpio keys in the dts
> file like you said the same as with the iconnect but the kernel keeps
> crashing with them defined in the dts is the support actualy there for
> the keys? or have i just defined them wrong?

...

> +		sata at 80000 {
> +			compatible = "marvell,orion-sata";
> +			reg = <0x80000 0x5000>;
> +			interrupts = <21>;
> +			status = "okay";
> +			nr-ports = <2>;
> +		};

You should not need all the values above. All you need is what is
different to the defaults in kirkwood.dtsi. So i _think_ you need:

		sata at 80000 {
			status = "okay";
			nr-ports = <2>;
		};


> +	gpio_keys {
> +		compatible = "gpio-keys";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		button at 1 {
> +			label = "OTB Button";
> +			linux,code = <0x00>;

0x00 seems odd.  

>From <linux/input.h>

#define KEY_RESERVED            0


> +			gpios = <&gpio1 4 1>;
> +			debounce-interval = <100>;
> +		};
> +		button at 2 {
> +			label = "Reset";
> +			linux,code = <0x01>;

0x01 seems odd.
#define KEY_ESC                 1

> +			gpios = <&gpio0 12 1>;
> +			debounce-interval = <100>;
> +		};
> +		button at 3 {
> +			label = "Power";
> +			linux,code = <0x028>;

#define KEY_APOSTROPHE          40

???

	Andrew