[PATCH] ARM: imx/iomux-v3: allow pad_list to be const
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Thu Aug 9 11:57:15 EDT 2012
Also fix all machine files to make use of it and while at it also make
the pad lists __init_const.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
Hello,
well, iomux-v3 is dying so I don't know how welcome this patch is.
Best regards
Uwe
arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c | 2 +-
arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c | 2 +-
arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c | 2 +-
arch/arm/mach-imx/mach-cpuimx35.c | 2 +-
arch/arm/mach-imx/mach-cpuimx51sd.c | 2 +-
arch/arm/mach-imx/mach-eukrea_cpuimx25.c | 2 +-
arch/arm/mach-imx/mach-mx25_3ds.c | 2 +-
arch/arm/mach-imx/mach-mx35_3ds.c | 2 +-
arch/arm/mach-imx/mach-mx50_rdp.c | 2 +-
arch/arm/mach-imx/mach-mx51_3ds.c | 2 +-
arch/arm/mach-imx/mach-mx51_babbage.c | 2 +-
arch/arm/mach-imx/mach-mx51_efikamx.c | 2 +-
arch/arm/mach-imx/mach-mx51_efikasb.c | 2 +-
arch/arm/mach-imx/mach-mx53_ard.c | 2 +-
arch/arm/mach-imx/mach-mx53_evk.c | 2 +-
arch/arm/mach-imx/mach-mx53_loco.c | 2 +-
arch/arm/mach-imx/mach-mx53_smd.c | 2 +-
arch/arm/mach-imx/mach-pcm043.c | 2 +-
arch/arm/mach-imx/mach-vpr200.c | 2 +-
arch/arm/mach-imx/mx51_efika.c | 2 +-
arch/arm/plat-mxc/include/mach/iomux-v3.h | 3 ++-
arch/arm/plat-mxc/iomux-v3.c | 5 +++--
22 files changed, 25 insertions(+), 23 deletions(-)
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
index dfd2da8..9ca351d 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
@@ -35,7 +35,7 @@
#include "devices-imx25.h"
-static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
+static const iomux_v3_cfg_t eukrea_mbimxsd_pads[] __initconst = {
/* LCD */
MX25_PAD_LD0__LD0,
MX25_PAD_LD1__LD1,
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
index 6e9dd12..0a37e17 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
@@ -101,7 +101,7 @@ static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.num_modes = ARRAY_SIZE(fb_modedb),
};
-static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
+static const iomux_v3_cfg_t eukrea_mbimxsd_pads[] __initconst = {
/* LCD */
MX35_PAD_LD0__IPU_DISPB_DAT_0,
MX35_PAD_LD1__IPU_DISPB_DAT_1,
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c
index 96a24b7..7d77038 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c
@@ -42,7 +42,7 @@
#include "devices-imx51.h"
-static iomux_v3_cfg_t eukrea_mbimxsd51_pads[] = {
+static const iomux_v3_cfg_t eukrea_mbimxsd51_pads[] __initconst = {
/* LED */
MX51_PAD_NANDF_D10__GPIO3_30,
/* SWITCH */
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index d49b0ec..13e31a5 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -75,7 +75,7 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
},
};
-static iomux_v3_cfg_t eukrea_cpuimx35_pads[] = {
+static const iomux_v3_cfg_t eukrea_cpuimx35_pads[] __initconst = {
/* UART1 */
MX35_PAD_CTS1__UART1_CTS,
MX35_PAD_RTS1__UART1_RTS,
diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c
index b87cc49..3b893b4 100644
--- a/arch/arm/mach-imx/mach-cpuimx51sd.c
+++ b/arch/arm/mach-imx/mach-cpuimx51sd.c
@@ -63,7 +63,7 @@
#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
#define MX51_USB_PLL_DIV_24_MHZ 0x02
-static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = {
+static const iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] __initconst = {
/* UART1 */
MX51_PAD_UART1_RXD__UART1_RXD,
MX51_PAD_UART1_TXD__UART1_TXD,
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index 017bbb70..2e93ba1 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -44,7 +44,7 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
-static iomux_v3_cfg_t eukrea_cpuimx25_pads[] = {
+static const iomux_v3_cfg_t eukrea_cpuimx25_pads[] __initconst = {
/* FEC - RMII */
MX25_PAD_FEC_MDC__FEC_MDC,
MX25_PAD_FEC_MDIO__FEC_MDIO,
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index ce247fd..5fb4592 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -49,7 +49,7 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
-static iomux_v3_cfg_t mx25pdk_pads[] = {
+static const iomux_v3_cfg_t mx25pdk_pads[] __initconst = {
MX25_PAD_FEC_MDC__FEC_MDC,
MX25_PAD_FEC_MDIO__FEC_MDIO,
MX25_PAD_FEC_TDATA0__FEC_TDATA0,
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 504983c..ef175fb 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -165,7 +165,7 @@ static struct platform_device *devices[] __initdata = {
&mx35pdk_flash,
};
-static iomux_v3_cfg_t mx35pdk_pads[] = {
+static const iomux_v3_cfg_t mx35pdk_pads[] __initconst = {
/* UART1 */
MX35_PAD_CTS1__UART1_CTS,
MX35_PAD_RTS1__UART1_RTS,
diff --git a/arch/arm/mach-imx/mach-mx50_rdp.c b/arch/arm/mach-imx/mach-mx50_rdp.c
index 42b66e8..7910761 100644
--- a/arch/arm/mach-imx/mach-mx50_rdp.c
+++ b/arch/arm/mach-imx/mach-mx50_rdp.c
@@ -39,7 +39,7 @@
#define FEC_EN IMX_GPIO_NR(6, 23)
#define FEC_RESET_B IMX_GPIO_NR(4, 12)
-static iomux_v3_cfg_t mx50_rdp_pads[] __initdata = {
+static const iomux_v3_cfg_t mx50_rdp_pads[] __initconst = {
/* SD1 */
MX50_PAD_ECSPI2_SS0__GPIO_4_19,
MX50_PAD_EIM_CRE__GPIO_1_27,
diff --git a/arch/arm/mach-imx/mach-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c
index 9ee84a4..fd972a9 100644
--- a/arch/arm/mach-imx/mach-mx51_3ds.c
+++ b/arch/arm/mach-imx/mach-mx51_3ds.c
@@ -28,7 +28,7 @@
#define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28)
-static iomux_v3_cfg_t mx51_3ds_pads[] = {
+static const iomux_v3_cfg_t mx51_3ds_pads[] __initconst = {
/* UART1 */
MX51_PAD_UART1_RXD__UART1_RXD,
MX51_PAD_UART1_TXD__UART1_TXD,
diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c
index 7b31cbd..7bc9731 100644
--- a/arch/arm/mach-imx/mach-mx51_babbage.c
+++ b/arch/arm/mach-imx/mach-mx51_babbage.c
@@ -65,7 +65,7 @@ static const struct gpio_keys_platform_data imx_button_data __initconst = {
.nbuttons = ARRAY_SIZE(babbage_buttons),
};
-static iomux_v3_cfg_t mx51babbage_pads[] = {
+static const iomux_v3_cfg_t mx51babbage_pads[] __initconst = {
/* UART1 */
MX51_PAD_UART1_RXD__UART1_RXD,
MX51_PAD_UART1_TXD__UART1_TXD,
diff --git a/arch/arm/mach-imx/mach-mx51_efikamx.c b/arch/arm/mach-imx/mach-mx51_efikamx.c
index 8d09c01..b792086 100644
--- a/arch/arm/mach-imx/mach-mx51_efikamx.c
+++ b/arch/arm/mach-imx/mach-mx51_efikamx.c
@@ -65,7 +65,7 @@
#define MX51_PAD_PCBID2 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
-static iomux_v3_cfg_t mx51efikamx_pads[] = {
+static const iomux_v3_cfg_t mx51efikamx_pads[] __initconst = {
/* board id */
MX51_PAD_PCBID0,
MX51_PAD_PCBID1,
diff --git a/arch/arm/mach-imx/mach-mx51_efikasb.c b/arch/arm/mach-imx/mach-mx51_efikasb.c
index fdbd181..1285920 100644
--- a/arch/arm/mach-imx/mach-mx51_efikasb.c
+++ b/arch/arm/mach-imx/mach-mx51_efikasb.c
@@ -57,7 +57,7 @@
#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
#define MX51_PAD_SD1_CD IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-static iomux_v3_cfg_t mx51efikasb_pads[] = {
+static const iomux_v3_cfg_t mx51efikasb_pads[] __initconst = {
/* USB HOST2 */
MX51_PAD_EIM_D16__USBH2_DATA0,
MX51_PAD_EIM_D17__USBH2_DATA1,
diff --git a/arch/arm/mach-imx/mach-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c
index 6c28e65..acbc2f5 100644
--- a/arch/arm/mach-imx/mach-mx53_ard.c
+++ b/arch/arm/mach-imx/mach-mx53_ard.c
@@ -46,7 +46,7 @@
#define ARD_PROG IMX_GPIO_NR(5, 12)
#define ARD_VOLUMEUP IMX_GPIO_NR(5, 13)
-static iomux_v3_cfg_t mx53_ard_pads[] = {
+static const iomux_v3_cfg_t mx53_ard_pads[] __initconst = {
/* UART1 */
MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
diff --git a/arch/arm/mach-imx/mach-mx53_evk.c b/arch/arm/mach-imx/mach-mx53_evk.c
index 09fe219..e49d55f 100644
--- a/arch/arm/mach-imx/mach-mx53_evk.c
+++ b/arch/arm/mach-imx/mach-mx53_evk.c
@@ -39,7 +39,7 @@
#include "devices-imx53.h"
-static iomux_v3_cfg_t mx53_evk_pads[] = {
+static const iomux_v3_cfg_t mx53_evk_pads[] __initconst = {
MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
diff --git a/arch/arm/mach-imx/mach-mx53_loco.c b/arch/arm/mach-imx/mach-mx53_loco.c
index 8abe23c..367aeb5 100644
--- a/arch/arm/mach-imx/mach-mx53_loco.c
+++ b/arch/arm/mach-imx/mach-mx53_loco.c
@@ -44,7 +44,7 @@
#define LOCO_SD1_CD IMX_GPIO_NR(3, 13)
#define LOCO_ACCEL_EN IMX_GPIO_NR(6, 14)
-static iomux_v3_cfg_t mx53_loco_pads[] = {
+static const iomux_v3_cfg_t mx53_loco_pads[] __initconst = {
/* FEC */
MX53_PAD_FEC_MDC__FEC_MDC,
MX53_PAD_FEC_MDIO__FEC_MDIO,
diff --git a/arch/arm/mach-imx/mach-mx53_smd.c b/arch/arm/mach-imx/mach-mx53_smd.c
index b15d6a6..21ee713 100644
--- a/arch/arm/mach-imx/mach-mx53_smd.c
+++ b/arch/arm/mach-imx/mach-mx53_smd.c
@@ -36,7 +36,7 @@
#define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6)
#define MX53_SMD_SATA_PWR_EN IMX_GPIO_NR(3, 3)
-static iomux_v3_cfg_t mx53_smd_pads[] = {
+static const iomux_v3_cfg_t mx53_smd_pads[] __initconst = {
MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index e4bd438..618cea9 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -129,7 +129,7 @@ static struct platform_device *devices[] __initdata = {
&pcm043_flash,
};
-static iomux_v3_cfg_t pcm043_pads[] = {
+static const iomux_v3_cfg_t pcm043_pads[] __initconst = {
/* UART1 */
MX35_PAD_CTS1__UART1_CTS,
MX35_PAD_RTS1__UART1_RTS,
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index 39eb796..26e1674 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -161,7 +161,7 @@ static struct i2c_board_info vpr200_i2c_devices[] = {
}
};
-static iomux_v3_cfg_t vpr200_pads[] = {
+static const iomux_v3_cfg_t vpr200_pads[] __initconst = {
/* UART1 */
MX35_PAD_TXD1__UART1_TXD_MUX,
MX35_PAD_RXD1__UART1_RXD_MUX,
diff --git a/arch/arm/mach-imx/mx51_efika.c b/arch/arm/mach-imx/mx51_efika.c
index ee870c4..25e3417 100644
--- a/arch/arm/mach-imx/mx51_efika.c
+++ b/arch/arm/mach-imx/mx51_efika.c
@@ -55,7 +55,7 @@
#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6)
-static iomux_v3_cfg_t mx51efika_pads[] = {
+static const iomux_v3_cfg_t mx51efika_pads[] __initconst = {
/* UART1 */
MX51_PAD_UART1_RXD__UART1_RXD,
MX51_PAD_UART1_TXD__UART1_TXD,
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index 2fa3b54..5f4bbf1 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -131,7 +131,8 @@ int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
* setups mutliple pads
* convenient way to call the above function with tables
*/
-int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count);
+int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list,
+ unsigned count);
/*
* Initialise the iomux controller
diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c
index 99a9cdb..1258ebf 100644
--- a/arch/arm/plat-mxc/iomux-v3.c
+++ b/arch/arm/plat-mxc/iomux-v3.c
@@ -56,9 +56,10 @@ int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
}
EXPORT_SYMBOL(mxc_iomux_v3_setup_pad);
-int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count)
+int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list,
+ unsigned count)
{
- iomux_v3_cfg_t *p = pad_list;
+ const iomux_v3_cfg_t *p = pad_list;
int i;
int ret;
--
1.7.10.4
More information about the linux-arm-kernel
mailing list