[PATCH V5 0/5] clk: mmp: add clock framework for mmp
xiechao.mail at gmail.com
Sun Aug 26 21:19:02 EDT 2012
On Sat, Aug 25, 2012 at 8:21 AM, Mike Turquette <mturquette at linaro.org> wrote:
> Quoting Chao Xie (2012-08-19 19:55:10)
>> From: Chao Xie <chao.xie at marvell.com>
>> arch/arm/mach-mmp/Kconfig | 3 +
>> drivers/clk/Makefile | 3 +
>> drivers/clk/mmp/Makefile | 9 +
>> drivers/clk/mmp/clk-apbc.c | 152 ++++++++++++++
>> drivers/clk/mmp/clk-apmu.c | 97 +++++++++
>> drivers/clk/mmp/clk-frac.c | 153 ++++++++++++++
>> drivers/clk/mmp/clk-mmp2.c | 449 ++++++++++++++++++++++++++++++++++++++++++
>> drivers/clk/mmp/clk-pxa168.c | 346 ++++++++++++++++++++++++++++++++
>> drivers/clk/mmp/clk-pxa910.c | 320 ++++++++++++++++++++++++++++++
>> drivers/clk/mmp/clk.h | 35 ++++
> Looks like you are not removing your arch/arm/mach-mmp/clock.c. Is that
> When I apply your series against v3.6-rc3 I find that compilation breaks
> with mmp2_defconfig due to conflicting definitions for the clk api
> (clk_enable, clk_set_rate, etc). This is not surprising since your
> legacy clock code is neither deleted nor removed from compilation
> conditionally by checking for CONFIG_COMMON_CLK.
> Did I somehow manage to misapply your patches or should your patches
> have removed the arch-specific clock framework as well?
Yes. There are some patches for seperate the original clock code in arch.
I had sent these patches before, but it seems that too many patches
sent, and haojian missed it.
I will sent out the patches for arch today. Thanks.
>> 10 files changed, 1567 insertions(+), 0 deletions(-)
>> create mode 100644 drivers/clk/mmp/Makefile
>> create mode 100644 drivers/clk/mmp/clk-apbc.c
>> create mode 100644 drivers/clk/mmp/clk-apmu.c
>> create mode 100644 drivers/clk/mmp/clk-frac.c
>> create mode 100644 drivers/clk/mmp/clk-mmp2.c
>> create mode 100644 drivers/clk/mmp/clk-pxa168.c
>> create mode 100644 drivers/clk/mmp/clk-pxa910.c
>> create mode 100644 drivers/clk/mmp/clk.h
More information about the linux-arm-kernel