[PATCH 2/4] mtd nand mxc_nand: swap iomem resource order
Sascha Hauer
s.hauer at pengutronix.de
Wed Aug 29 03:40:17 EDT 2012
The i.MX v3 nand controller (i.MX5) needs two memory resources.
Traditionally we have the AXI resource first. For sorting in this
driver into the devicetree it feels much more natural to have the
IP resource first. This patch swaps the ordering of these two
resources.
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
arch/arm/plat-mxc/devices/platform-mxc_nand.c | 11 ++++----
drivers/mtd/nand/mxc_nand.c | 35 ++++++++++++++-----------
2 files changed, 24 insertions(+), 22 deletions(-)
diff --git a/arch/arm/plat-mxc/devices/platform-mxc_nand.c b/arch/arm/plat-mxc/devices/platform-mxc_nand.c
index 1568f39..95b75cc 100644
--- a/arch/arm/plat-mxc/devices/platform-mxc_nand.c
+++ b/arch/arm/plat-mxc/devices/platform-mxc_nand.c
@@ -63,10 +63,6 @@ struct platform_device *__init imx_add_mxc_nand(
/* AXI has to come first, that's how the mxc_nand driver expect it */
struct resource res[] = {
{
- .start = data->axibase,
- .end = data->axibase + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
@@ -74,10 +70,13 @@ struct platform_device *__init imx_add_mxc_nand(
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
+ }, {
+ .start = data->axibase,
+ .end = data->axibase + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
},
};
return imx_add_platform_device("mxc_nand", data->id,
- res + !data->axibase,
- ARRAY_SIZE(res) - !data->axibase,
+ res, ARRAY_SIZE(res) - !data->axibase,
pdata, sizeof(*pdata));
}
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 268c0dc..efbc72c 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -1376,7 +1376,25 @@ static int __init mxcnd_probe(struct platform_device *pdev)
if (IS_ERR(host->clk))
return PTR_ERR(host->clk);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ err = mxcnd_probe_dt(host);
+ if (err > 0)
+ err = mxcnd_probe_pdata(host);
+ if (err < 0)
+ return err;
+
+ if (host->devtype_data->needs_ip) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+ host->regs_ip = devm_request_and_ioremap(&pdev->dev, res);
+ if (!host->regs_ip)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ } else {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ }
+
if (!res)
return -ENODEV;
@@ -1386,12 +1404,6 @@ static int __init mxcnd_probe(struct platform_device *pdev)
host->main_area0 = host->base;
- err = mxcnd_probe_dt(host);
- if (err > 0)
- err = mxcnd_probe_pdata(host);
- if (err < 0)
- return err;
-
if (host->devtype_data->regs_offset)
host->regs = host->base + host->devtype_data->regs_offset;
host->spare0 = host->base + host->devtype_data->spare0_offset;
@@ -1405,15 +1417,6 @@ static int __init mxcnd_probe(struct platform_device *pdev)
this->ecc.size = 512;
this->ecc.layout = host->devtype_data->ecclayout_512;
- if (host->devtype_data->needs_ip) {
- res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!res)
- return -ENODEV;
- host->regs_ip = devm_request_and_ioremap(&pdev->dev, res);
- if (!host->regs_ip)
- return -ENOMEM;
- }
-
if (host->pdata.hw_ecc) {
this->ecc.calculate = mxc_nand_calculate_ecc;
this->ecc.hwctl = mxc_nand_enable_hwecc;
--
1.7.10.4
More information about the linux-arm-kernel
mailing list