[PATCH 4/5] ARM: dts: add twi nodes for atmel SOCs
Nicolas Ferre
nicolas.ferre at atmel.com
Tue Aug 21 12:10:56 EDT 2012
On 08/21/2012 04:29 PM, ludovic.desroches at atmel.com :
> From: Ludovic Desroches <ludovic.desroches at atmel.com>
>
> Add twi nodes for atmel SOCs and remove i2c-gpio ones.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches at atmel.com>
Yes, we will move to it once people test it a little bit...
Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>
> ---
> arch/arm/boot/dts/at91sam9260.dtsi | 23 ++++++-------
> arch/arm/boot/dts/at91sam9263.dtsi | 23 ++++++-------
> arch/arm/boot/dts/at91sam9g45.dtsi | 33 +++++++++++-------
> arch/arm/boot/dts/at91sam9n12.dtsi | 33 +++++++++++-------
> arch/arm/boot/dts/at91sam9x5.dtsi | 69 +++++++++++++++++---------------------
> 5 files changed, 90 insertions(+), 91 deletions(-)
>
> diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
> index f449efc..0ab7a3c 100644
> --- a/arch/arm/boot/dts/at91sam9260.dtsi
> +++ b/arch/arm/boot/dts/at91sam9260.dtsi
> @@ -28,6 +28,7 @@
> gpio2 = &pioC;
> tcb0 = &tcb0;
> tcb1 = &tcb1;
> + i2c0 = &i2c0;
> };
> cpus {
> cpu at 0 {
> @@ -198,6 +199,15 @@
> status = "disabled";
> };
>
> + i2c0: i2c at fffac000 {
> + compatible = "atmel,at91sam9260-i2c";
> + reg = <0xfffac000 0x100>;
> + interrupts = <11 4>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> adc0: adc at fffe0000 {
> compatible = "atmel,at91sam9260-adc";
> reg = <0xfffe0000 0x100>;
> @@ -257,17 +267,4 @@
> status = "disabled";
> };
> };
> -
> - i2c at 0 {
> - compatible = "i2c-gpio";
> - gpios = <&pioA 23 0 /* sda */
> - &pioA 24 0 /* scl */
> - >;
> - i2c-gpio,sda-open-drain;
> - i2c-gpio,scl-open-drain;
> - i2c-gpio,delay-us = <2>; /* ~100 kHz */
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "disabled";
> - };
> };
> diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
> index 0209913..efb86dd 100644
> --- a/arch/arm/boot/dts/at91sam9263.dtsi
> +++ b/arch/arm/boot/dts/at91sam9263.dtsi
> @@ -24,6 +24,7 @@
> gpio3 = &pioD;
> gpio4 = &pioE;
> tcb0 = &tcb0;
> + i2c0 = &i2c0;
> };
> cpus {
> cpu at 0 {
> @@ -179,6 +180,15 @@
> interrupts = <24 4>;
> status = "disabled";
> };
> +
> + i2c0: i2c at fff88000 {
> + compatible = "atmel,at91sam9260-i2c";
> + reg = <0xfff88000 0x100>;
> + interrupts = <13 4>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> };
>
> nand0: nand at 40000000 {
> @@ -204,17 +214,4 @@
> status = "disabled";
> };
> };
> -
> - i2c at 0 {
> - compatible = "i2c-gpio";
> - gpios = <&pioB 4 0 /* sda */
> - &pioB 5 0 /* scl */
> - >;
> - i2c-gpio,sda-open-drain;
> - i2c-gpio,scl-open-drain;
> - i2c-gpio,delay-us = <2>; /* ~100 kHz */
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "disabled";
> - };
> };
> diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
> index 7dbccaf..8dd3ff8 100644
> --- a/arch/arm/boot/dts/at91sam9g45.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g45.dtsi
> @@ -29,6 +29,8 @@
> gpio4 = &pioE;
> tcb0 = &tcb0;
> tcb1 = &tcb1;
> + i2c0 = &i2c0;
> + i2c1 = &i2c1;
> };
> cpus {
> cpu at 0 {
> @@ -200,6 +202,24 @@
> status = "disabled";
> };
>
> + i2c0: i2c at fff84000 {
> + compatible = "atmel,at91sam9260-i2c";
> + reg = <0xfff84000 0x100>;
> + interrupts = <12 4>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c at fff88000 {
> + compatible = "atmel,at91sam9260-i2c";
> + reg = <0xfff88000 0x100>;
> + interrupts = <13 4>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> adc0: adc at fffb0000 {
> compatible = "atmel,at91sam9260-adc";
> reg = <0xfffb0000 0x100>;
> @@ -268,17 +288,4 @@
> status = "disabled";
> };
> };
> -
> - i2c at 0 {
> - compatible = "i2c-gpio";
> - gpios = <&pioA 20 0 /* sda */
> - &pioA 21 0 /* scl */
> - >;
> - i2c-gpio,sda-open-drain;
> - i2c-gpio,scl-open-drain;
> - i2c-gpio,delay-us = <5>; /* ~100 kHz */
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "disabled";
> - };
> };
> diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
> index cb84de7..8a1969d 100644
> --- a/arch/arm/boot/dts/at91sam9n12.dtsi
> +++ b/arch/arm/boot/dts/at91sam9n12.dtsi
> @@ -26,6 +26,8 @@
> gpio3 = &pioD;
> tcb0 = &tcb0;
> tcb1 = &tcb1;
> + i2c0 = &i2c0;
> + i2c1 = &i2c1;
> };
> cpus {
> cpu at 0 {
> @@ -178,6 +180,24 @@
> atmel,use-dma-tx;
> status = "disabled";
> };
> +
> + i2c0: i2c at f8010000 {
> + compatible = "atmel,at91sam9260-i2c";
> + reg = <0xf8010000 0x100>;
> + interrupts = <9 4>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c at f8014000 {
> + compatible = "atmel,at91sam9260-i2c";
> + reg = <0xf8014000 0x100>;
> + interrupts = <10 4>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> };
>
> nand0: nand at 40000000 {
> @@ -205,17 +225,4 @@
> status = "disabled";
> };
> };
> -
> - i2c at 0 {
> - compatible = "i2c-gpio";
> - gpios = <&pioA 30 0 /* sda */
> - &pioA 31 0 /* scl */
> - >;
> - i2c-gpio,sda-open-drain;
> - i2c-gpio,scl-open-drain;
> - i2c-gpio,delay-us = <2>; /* ~100 kHz */
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "disabled";
> - };
> };
> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
> index 6b3ef43..ec56eaf 100644
> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
> @@ -27,6 +27,9 @@
> gpio3 = &pioD;
> tcb0 = &tcb0;
> tcb1 = &tcb1;
> + i2c0 = &i2c0;
> + i2c1 = &i2c1;
> + i2c2 = &i2c2;
> };
> cpus {
> cpu at 0 {
> @@ -191,6 +194,33 @@
> status = "disabled";
> };
>
> + i2c0: i2c at f8010000 {
> + compatible = "atmel,at91sam9260-i2c";
> + reg = <0xf8010000 0x100>;
> + interrupts = <9 4>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c at f8014000 {
> + compatible = "atmel,at91sam9260-i2c";
> + reg = <0xf8014000 0x100>;
> + interrupts = <10 4>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c at f8018000 {
> + compatible = "atmel,at91sam9260-i2c";
> + reg = <0xf8018000 0x100>;
> + interrupts = <11 4>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> adc0: adc at f804c000 {
> compatible = "atmel,at91sam9260-adc";
> reg = <0xf804c000 0x100>;
> @@ -259,43 +289,4 @@
> status = "disabled";
> };
> };
> -
> - i2c at 0 {
> - compatible = "i2c-gpio";
> - gpios = <&pioA 30 0 /* sda */
> - &pioA 31 0 /* scl */
> - >;
> - i2c-gpio,sda-open-drain;
> - i2c-gpio,scl-open-drain;
> - i2c-gpio,delay-us = <2>; /* ~100 kHz */
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "disabled";
> - };
> -
> - i2c at 1 {
> - compatible = "i2c-gpio";
> - gpios = <&pioC 0 0 /* sda */
> - &pioC 1 0 /* scl */
> - >;
> - i2c-gpio,sda-open-drain;
> - i2c-gpio,scl-open-drain;
> - i2c-gpio,delay-us = <2>; /* ~100 kHz */
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "disabled";
> - };
> -
> - i2c at 2 {
> - compatible = "i2c-gpio";
> - gpios = <&pioB 4 0 /* sda */
> - &pioB 5 0 /* scl */
> - >;
> - i2c-gpio,sda-open-drain;
> - i2c-gpio,scl-open-drain;
> - i2c-gpio,delay-us = <2>; /* ~100 kHz */
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "disabled";
> - };
> };
>
--
Nicolas Ferre
More information about the linux-arm-kernel
mailing list