[PATCH 2/5] clk: mmp: add clock definition for pxa168

[Arnd Bergmann]

On Thursday 02 August 2012, Chao Xie wrote:
> > #define APBC_RTC       0x28
> >
> > apbc_clks[rtc_clk] = mmp_clk_register_apbc(rtc_clk, clk32k, APBC_RTC, 10, APBC_POWER_CTRL, mmp_clk_lock);
> > clk_register_clkdev(apbc_clks[rtc_clk], NULL, "sa1100-rtc");
> >
> >         Arnd
> >
> hi
> I would like to keep the mmp_clk_register_apbc to receive the "reg
> base" not "reg offset".
> It will be aligned with other kind of clock register APIs.
> To read out APBC base register from device tree can be added at the
> clock-pxa168.c, and it can map the registers and pass to the
> mmp_clk_register_apbc.

Right, my mistake.

The above should have been something like

#define APBC_RTC       0x28
apbc_clks[rtc_clk] = mmp_clk_register_apbc(rtc_clk, clk32k, clock_base + APBC_RTC, 10, APBC_POWER_CTRL, mmp_clk_lock);
clk_register_clkdev(apbc_clks[rtc_clk], NULL, "sa1100-rtc");

instead, with clock_base pointing to the __iomem token for the clock controller.

> Now, i have talked to Haojian who is doing device tree maintainer in
> pxa/mmp. This kind of support is not added.
> I suggest that after device tree support in clock can be added later
> after other functionality of the clock framework is fine.

You can do device tree support as a second step, but in this first step, you
should already start using ioremap to get the virtual address of the
clock controller, rather than hardcoding it.

	Arnd