[PATCH V2] mxs/spi: Fix misuse of init_completion

[Marek Vasut]

The init_completion() call does reinit not only the variable carrying
the flag that the completion finished, but also initialized the
waitqueue associated with the completion. On the contrary, the
INIT_WAITQUEUE() call only reinits the flag.

In case there was anything still stuck in the waitqueue, subsequent call
to init_completion() would be able to create possible race condition. This
patch uses the proper function and moves init_completion() into .probe() call
of the driver, to be issued only once.

Note that such scenario is impossible, since two threads can never enter the
mxs_spi_txrx_dma(), since whole this section is protected by mutex in SPI core.
This by no means allows this issue to exit though.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Chris Ball <cjb at laptop.org>
Cc: Shawn Guo <shawn.guo at linaro.org>
Cc: Mark Brown <broonie at opensource.wolfsonmicro.com>
Cc: Fabio Estevam <fabio.estevam at freescale.com>
---
 drivers/spi/spi-mxs.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

V2: Update the patch description and snap a whip over myself for being lazy to
    write one in the first place!

diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c
index 331f600..c965cc6 100644
--- a/drivers/spi/spi-mxs.c
+++ b/drivers/spi/spi-mxs.c
@@ -230,7 +230,7 @@ static int mxs_spi_txrx_dma(struct mxs_spi *spi, int cs,
 		return -EINVAL;
 	}
 
-	init_completion(&spi->c);
+	INIT_COMPLETION(spi->c);
 
 	if (*first)
 		pio |= BM_SSP_CTRL0_LOCK_CS;
@@ -560,6 +560,8 @@ static int __devinit mxs_spi_probe(struct platform_device *pdev)
 	ssp->devid = devid;
 	ssp->dma_channel = dma_channel;
 
+	init_completion(&spi->c);
+
 	ret = devm_request_irq(&pdev->dev, irq_err, mxs_ssp_irq_handler, 0,
 			       DRIVER_NAME, ssp);
 	if (ret)
-- 
1.7.10.4