[PATCHv7 09/24] i2c: omap: switch over to do {} while loop
Shubhrajyoti D
shubhrajyoti at ti.com
Thu Aug 16 10:03:40 EDT 2012
From: Felipe Balbi <balbi at ti.com>
this will make sure that we execute at least once.
No functional changes otherwise.
Signed-off-by: Felipe Balbi <balbi at ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti at ti.com>
---
drivers/i2c/busses/i2c-omap.c | 20 ++++++++++++++------
1 files changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index d4b6f7d..8b80799 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -827,20 +827,28 @@ omap_i2c_isr(int this_irq, void *dev_id)
struct omap_i2c_dev *dev = dev_id;
u16 bits;
u16 stat;
- int err, count = 0;
+ int err = 0, count = 0;
if (pm_runtime_suspended(dev->dev))
return IRQ_NONE;
- bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
- while ((stat = (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG))) & bits) {
+ do {
+ bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
+ stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
+ stat &= bits;
+
+ if (!stat) {
+ /* my work here is done */
+ return IRQ_HANDLED;
+ }
+
dev_dbg(dev->dev, "IRQ (ISR = 0x%04x)\n", stat);
if (count++ == 100) {
dev_warn(dev->dev, "Too much work in one IRQ\n");
- break;
+ omap_i2c_complete_cmd(dev, err);
+ return IRQ_HANDLED;
}
- err = 0;
complete:
/*
* Ack the stat in one go, but [R/X]DR and [R/X]RDY should be
@@ -940,7 +948,7 @@ complete:
dev_err(dev->dev, "Transmit underflow\n");
dev->cmd_err |= OMAP_I2C_STAT_XUDF;
}
- }
+ } while (stat);
return count ? IRQ_HANDLED : IRQ_NONE;
}
--
1.7.5.4
More information about the linux-arm-kernel
mailing list