[PATCH] ARM: imx6q-sabrelite: Setup CLKO IOMUX

[Dirk Behme]

On 02.08.2012 03:11, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
> 
> In order to have audio functional on mx6qsabrelite, it is necessary to setup
> the IOMUX for MX6Q_PAD_GPIO_0__CCM_CLKO pins as it provides the audio clock.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>

Tested-by: Dirk Behme <dirk.behme at de.bosch.com>

Thanks

Dirk

> ---
>  arch/arm/boot/dts/imx6q-sabrelite.dts |    1 +
>  1 files changed, 1 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
> index d42e851..1769f44 100644
> --- a/arch/arm/boot/dts/imx6q-sabrelite.dts
> +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
> @@ -53,6 +53,7 @@
>  						fsl,pins = <
>  							   144  0x80000000	/* MX6Q_PAD_EIM_D22__GPIO_3_22 */
>  							   121  0x80000000	/* MX6Q_PAD_EIM_D19__GPIO_3_19 */
> +							   953  0x80000000	/* MX6Q_PAD_GPIO_0__CCM_CLKO */		
>  							   >;
>  					};
>  				};