[PATCH V5 2/5] clk: mmp: add clock definition for pxa168

Chao Xie xiechao.mail at gmail.com
Sun Aug 19 22:55:12 EDT 2012


From: Chao Xie <chao.xie at marvell.com>

Initialize the clocks for pxa168

Signed-off-by: Chao Xie <xiechao.mail at gmail.com>
---
 drivers/clk/mmp/Makefile     |    2 +
 drivers/clk/mmp/clk-pxa168.c |  346 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 348 insertions(+), 0 deletions(-)
 create mode 100644 drivers/clk/mmp/clk-pxa168.c

diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index b5bc88c..a0e69ed 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -3,3 +3,5 @@
 #
 
 obj-y += clk-apbc.o clk-apmu.o clk-frac.o
+
+obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
diff --git a/drivers/clk/mmp/clk-pxa168.c b/drivers/clk/mmp/clk-pxa168.c
new file mode 100644
index 0000000..e8d036c
--- /dev/null
+++ b/drivers/clk/mmp/clk-pxa168.c
@@ -0,0 +1,346 @@
+/*
+ * pxa168 clock framework source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail at gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+
+#include <mach/addr-map.h>
+
+#include "clk.h"
+
+#define APBC_RTC	0x28
+#define APBC_TWSI0	0x2c
+#define APBC_KPC	0x30
+#define APBC_UART0	0x0
+#define APBC_UART1	0x4
+#define APBC_GPIO	0x8
+#define APBC_PWM0	0xc
+#define APBC_PWM1	0x10
+#define APBC_PWM2	0x14
+#define APBC_PWM3	0x18
+#define APBC_SSP0	0x81c
+#define APBC_SSP1	0x820
+#define APBC_SSP2	0x84c
+#define APBC_SSP3	0x858
+#define APBC_SSP4	0x85c
+#define APBC_TWSI1	0x6c
+#define APBC_UART2	0x70
+#define APMU_SDH0	0x54
+#define APMU_SDH1	0x58
+#define APMU_USB	0x5c
+#define APMU_DISP0	0x4c
+#define APMU_CCIC0	0x50
+#define APMU_DFC	0x60
+#define MPMU_UART_PLL	0x14
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static struct clk_factor_masks uart_factor_masks = {
+	.factor = 2,
+	.num_mask = 0x1fff,
+	.den_mask = 0x1fff,
+	.num_shift = 16,
+	.den_shift = 0,
+};
+
+static struct clk_factor_tbl uart_factor_tbl[] = {
+	{.num = 8125, .den = 1536},	/*14.745MHZ */
+};
+
+static const char *uart_parent[] = {"pll1_3_16", "uart_pll"};
+static const char *ssp_parent[] = {"pll1_96", "pll1_48", "pll1_24", "pll1_12"};
+static const char *sdh_parent[] = {"pll1_12", "pll1_13"};
+static const char *disp_parent[] = {"pll1_2", "pll1_12"};
+static const char *ccic_parent[] = {"pll1_2", "pll1_12"};
+static const char *ccic_phy_parent[] = {"pll1_6", "pll1_12"};
+
+void __init pxa168_clk_init(void)
+{
+	struct clk *clk;
+	struct clk *uart_pll;
+	void __iomem *mpmu_base;
+	void __iomem *apmu_base;
+	void __iomem *apbc_base;
+
+	mpmu_base = ioremap(APB_PHYS_BASE + 0x50000, SZ_4K);
+	if (mpmu_base == NULL) {
+		pr_err("error to ioremap MPMU base\n");
+		return;
+	}
+
+	apmu_base = ioremap(AXI_PHYS_BASE + 0x82800, SZ_4K);
+	if (apmu_base == NULL) {
+		pr_err("error to ioremap APMU base\n");
+		return;
+	}
+
+	apbc_base = ioremap(APB_PHYS_BASE + 0x15000, SZ_4K);
+	if (apbc_base == NULL) {
+		pr_err("error to ioremap APBC base\n");
+		return;
+	}
+
+	clk = clk_register_fixed_rate(NULL, "clk32", NULL, CLK_IS_ROOT, 3200);
+	clk_register_clkdev(clk, "clk32", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "vctcxo", NULL, CLK_IS_ROOT,
+				26000000);
+	clk_register_clkdev(clk, "vctcxo", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "pll1", NULL, CLK_IS_ROOT,
+				624000000);
+	clk_register_clkdev(clk, "pll1", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "pll1_2", "pll1",
+				CLK_SET_RATE_PARENT, 1, 2);
+	clk_register_clkdev(clk, "pll1_2", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "pll1_4", "pll1_2",
+				CLK_SET_RATE_PARENT, 1, 2);
+	clk_register_clkdev(clk, "pll1_4", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "pll1_8", "pll1_4",
+				CLK_SET_RATE_PARENT, 1, 2);
+	clk_register_clkdev(clk, "pll1_8", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "pll1_16", "pll1_8",
+				CLK_SET_RATE_PARENT, 1, 2);
+	clk_register_clkdev(clk, "pll1_16", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "pll1_6", "pll1_2",
+				CLK_SET_RATE_PARENT, 1, 3);
+	clk_register_clkdev(clk, "pll1_6", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "pll1_12", "pll1_6",
+				CLK_SET_RATE_PARENT, 1, 2);
+	clk_register_clkdev(clk, "pll1_12", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "pll1_24", "pll1_12",
+				CLK_SET_RATE_PARENT, 1, 2);
+	clk_register_clkdev(clk, "pll1_24", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "pll1_48", "pll1_24",
+				CLK_SET_RATE_PARENT, 1, 2);
+	clk_register_clkdev(clk, "pll1_48", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "pll1_96", "pll1_48",
+				CLK_SET_RATE_PARENT, 1, 2);
+	clk_register_clkdev(clk, "pll1_96", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "pll1_13", "pll1",
+				CLK_SET_RATE_PARENT, 1, 13);
+	clk_register_clkdev(clk, "pll1_13", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "pll1_13_1_5", "pll1",
+				CLK_SET_RATE_PARENT, 2, 3);
+	clk_register_clkdev(clk, "pll1_13_1_5", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "pll1_2_1_5", "pll1",
+				CLK_SET_RATE_PARENT, 2, 3);
+	clk_register_clkdev(clk, "pll1_2_1_5", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "pll1_3_16", "pll1",
+				CLK_SET_RATE_PARENT, 3, 16);
+	clk_register_clkdev(clk, "pll1_3_16", NULL);
+
+	uart_pll = mmp_clk_register_factor("uart_pll", "pll1_4", 0,
+				mpmu_base + MPMU_UART_PLL,
+				&uart_factor_masks, uart_factor_tbl,
+				ARRAY_SIZE(uart_factor_tbl));
+	clk_set_rate(uart_pll, 14745600);
+	clk_register_clkdev(uart_pll, "uart_pll", NULL);
+
+	clk = mmp_clk_register_apbc("twsi0", "pll1_13_1_5",
+				apbc_base + APBC_TWSI0, 10, 0, &clk_lock);
+	clk_register_clkdev(clk, NULL, "pxa2xx-i2c.0");
+
+	clk = mmp_clk_register_apbc("twsi1", "pll1_13_1_5",
+				apbc_base + APBC_TWSI1, 10, 0, &clk_lock);
+	clk_register_clkdev(clk, NULL, "pxa2xx-i2c.1");
+
+	clk = mmp_clk_register_apbc("gpio", "vctcxo",
+				apbc_base + APBC_GPIO, 10, 0, &clk_lock);
+	clk_register_clkdev(clk, NULL, "pxa-gpio");
+
+	clk = mmp_clk_register_apbc("kpc", "clk32",
+				apbc_base + APBC_KPC, 10, 0, &clk_lock);
+	clk_register_clkdev(clk, NULL, "pxa27x-keypad");
+
+	clk = mmp_clk_register_apbc("rtc", "clk32",
+				apbc_base + APBC_RTC, 10, 0, &clk_lock);
+	clk_register_clkdev(clk, NULL, "sa1100-rtc");
+
+	clk = mmp_clk_register_apbc("pwm0", "pll1_48",
+				apbc_base + APBC_PWM0, 10, 0, &clk_lock);
+	clk_register_clkdev(clk, NULL, "pxa168-pwm.0");
+
+	clk = mmp_clk_register_apbc("pwm1", "pll1_48",
+				apbc_base + APBC_PWM1, 10, 0, &clk_lock);
+	clk_register_clkdev(clk, NULL, "pxa168-pwm.1");
+
+	clk = mmp_clk_register_apbc("pwm2", "pll1_48",
+				apbc_base + APBC_PWM2, 10, 0, &clk_lock);
+	clk_register_clkdev(clk, NULL, "pxa168-pwm.2");
+
+	clk = mmp_clk_register_apbc("pwm3", "pll1_48",
+				apbc_base + APBC_PWM3, 10, 0, &clk_lock);
+	clk_register_clkdev(clk, NULL, "pxa168-pwm.3");
+
+	clk = clk_register_mux(NULL, "uart0_mux", uart_parent,
+				ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+				apbc_base + APBC_UART0, 4, 3, 0, &clk_lock);
+	clk_set_parent(clk, uart_pll);
+	clk_register_clkdev(clk, "uart_mux.0", NULL);
+
+	clk = mmp_clk_register_apbc("uart0", "uart0_mux",
+				apbc_base + APBC_UART0, 10, 0, &clk_lock);
+	clk_register_clkdev(clk, NULL, "pxa2xx-uart.0");
+
+	clk = clk_register_mux(NULL, "uart1_mux", uart_parent,
+				ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+				apbc_base + APBC_UART1, 4, 3, 0, &clk_lock);
+	clk_set_parent(clk, uart_pll);
+	clk_register_clkdev(clk, "uart_mux.1", NULL);
+
+	clk = mmp_clk_register_apbc("uart1", "uart1_mux",
+				apbc_base + APBC_UART1,	10, 0, &clk_lock);
+	clk_register_clkdev(clk, NULL, "pxa2xx-uart.1");
+
+	clk = clk_register_mux(NULL, "uart2_mux", uart_parent,
+				ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+				apbc_base + APBC_UART2, 4, 3, 0, &clk_lock);
+	clk_set_parent(clk, uart_pll);
+	clk_register_clkdev(clk, "uart_mux.2", NULL);
+
+	clk = mmp_clk_register_apbc("uart2", "uart2_mux",
+				apbc_base + APBC_UART2,	10, 0, &clk_lock);
+	clk_register_clkdev(clk, NULL, "pxa2xx-uart.2");
+
+	clk = clk_register_mux(NULL, "ssp0_mux", ssp_parent,
+				ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+				apbc_base + APBC_SSP0, 4, 3, 0, &clk_lock);
+	clk_register_clkdev(clk, "uart_mux.0", NULL);
+
+	clk = mmp_clk_register_apbc("ssp0", "ssp0_mux", apbc_base + APBC_SSP0,
+				10, 0, &clk_lock);
+	clk_register_clkdev(clk, NULL, "mmp-ssp.0");
+
+	clk = clk_register_mux(NULL, "ssp1_mux", ssp_parent,
+				ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+				apbc_base + APBC_SSP1, 4, 3, 0, &clk_lock);
+	clk_register_clkdev(clk, "ssp_mux.1", NULL);
+
+	clk = mmp_clk_register_apbc("ssp1", "ssp1_mux", apbc_base + APBC_SSP1,
+				10, 0, &clk_lock);
+	clk_register_clkdev(clk, NULL, "mmp-ssp.1");
+
+	clk = clk_register_mux(NULL, "ssp2_mux", ssp_parent,
+				ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+				apbc_base + APBC_SSP2, 4, 3, 0, &clk_lock);
+	clk_register_clkdev(clk, "ssp_mux.2", NULL);
+
+	clk = mmp_clk_register_apbc("ssp2", "ssp1_mux", apbc_base + APBC_SSP2,
+				10, 0, &clk_lock);
+	clk_register_clkdev(clk, NULL, "mmp-ssp.2");
+
+	clk = clk_register_mux(NULL, "ssp3_mux", ssp_parent,
+				ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+				apbc_base + APBC_SSP3, 4, 3, 0, &clk_lock);
+	clk_register_clkdev(clk, "ssp_mux.3", NULL);
+
+	clk = mmp_clk_register_apbc("ssp3", "ssp1_mux", apbc_base + APBC_SSP3,
+				10, 0, &clk_lock);
+	clk_register_clkdev(clk, NULL, "mmp-ssp.3");
+
+	clk = clk_register_mux(NULL, "ssp4_mux", ssp_parent,
+				ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+				apbc_base + APBC_SSP4, 4, 3, 0, &clk_lock);
+	clk_register_clkdev(clk, "ssp_mux.4", NULL);
+
+	clk = mmp_clk_register_apbc("ssp4", "ssp1_mux", apbc_base + APBC_SSP4,
+				10, 0, &clk_lock);
+	clk_register_clkdev(clk, NULL, "mmp-ssp.4");
+
+	clk = mmp_clk_register_apmu("dfc", "pll1_4", apmu_base + APMU_DFC,
+				0x19b, &clk_lock);
+	clk_register_clkdev(clk, NULL, "pxa3xx-nand.0");
+
+	clk = clk_register_mux(NULL, "sdh0_mux", sdh_parent,
+				ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT,
+				apmu_base + APMU_SDH0, 6, 1, 0, &clk_lock);
+	clk_register_clkdev(clk, "sdh0_mux", NULL);
+
+	clk = mmp_clk_register_apmu("sdh0", "sdh_mux", apmu_base + APMU_SDH0,
+				0x1b, &clk_lock);
+	clk_register_clkdev(clk, NULL, "sdhci-pxa.0");
+
+	clk = clk_register_mux(NULL, "sdh1_mux", sdh_parent,
+				ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT,
+				apmu_base + APMU_SDH1, 6, 1, 0, &clk_lock);
+	clk_register_clkdev(clk, "sdh1_mux", NULL);
+
+	clk = mmp_clk_register_apmu("sdh1", "sdh1_mux", apmu_base + APMU_SDH1,
+				0x1b, &clk_lock);
+	clk_register_clkdev(clk, NULL, "sdhci-pxa.1");
+
+	clk = mmp_clk_register_apmu("usb", "usb_pll", apmu_base + APMU_USB,
+				0x9, &clk_lock);
+	clk_register_clkdev(clk, "usb_clk", NULL);
+
+	clk = mmp_clk_register_apmu("sph", "usb_pll", apmu_base + APMU_USB,
+				0x12, &clk_lock);
+	clk_register_clkdev(clk, "sph_clk", NULL);
+
+	clk = clk_register_mux(NULL, "disp0_mux", disp_parent,
+				ARRAY_SIZE(disp_parent), CLK_SET_RATE_PARENT,
+				apmu_base + APMU_DISP0, 6, 1, 0, &clk_lock);
+	clk_register_clkdev(clk, "disp_mux.0", NULL);
+
+	clk = mmp_clk_register_apmu("disp0", "disp0_mux",
+				apmu_base + APMU_DISP0, 0x1b, &clk_lock);
+	clk_register_clkdev(clk, "fnclk", "mmp-disp.0");
+
+	clk = mmp_clk_register_apmu("disp0_hclk", "disp0_mux",
+				apmu_base + APMU_DISP0, 0x24, &clk_lock);
+	clk_register_clkdev(clk, "hclk", "mmp-disp.0");
+
+	clk = clk_register_mux(NULL, "ccic0_mux", ccic_parent,
+				ARRAY_SIZE(ccic_parent), CLK_SET_RATE_PARENT,
+				apmu_base + APMU_CCIC0, 6, 1, 0, &clk_lock);
+	clk_register_clkdev(clk, "ccic_mux.0", NULL);
+
+	clk = mmp_clk_register_apmu("ccic0", "ccic0_mux",
+				apmu_base + APMU_CCIC0, 0x1b, &clk_lock);
+	clk_register_clkdev(clk, "fnclk", "mmp-ccic.0");
+
+	clk = clk_register_mux(NULL, "ccic0_phy_mux", ccic_phy_parent,
+				ARRAY_SIZE(ccic_phy_parent),
+				CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+				7, 1, 0, &clk_lock);
+	clk_register_clkdev(clk, "ccic_phy_mux.0", NULL);
+
+	clk = mmp_clk_register_apmu("ccic0_phy", "ccic0_phy_mux",
+				apmu_base + APMU_CCIC0, 0x24, &clk_lock);
+	clk_register_clkdev(clk, "phyclk", "mmp-ccic.0");
+
+	clk = clk_register_divider(NULL, "ccic0_sphy_div", "ccic0_mux",
+				CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+				10, 5, 0, &clk_lock);
+	clk_register_clkdev(clk, "sphyclk_div", NULL);
+
+	clk = mmp_clk_register_apmu("ccic0_sphy", "ccic0_sphy_div",
+				apmu_base + APMU_CCIC0, 0x300, &clk_lock);
+	clk_register_clkdev(clk, "sphyclk", "mmp-ccic.0");
+}
-- 
1.7.0.4




More information about the linux-arm-kernel mailing list