[PATCH v2] gpio: samsung: add devicetree init for s3c24xx arches

Kukjin Kim kgene.kim at samsung.com
Tue Aug 28 19:09:37 EDT 2012


On 08/28/12 14:55, Heiko Stübner wrote:
> Until now the Exynos-SoC was the only Samsung-SoC supporting the GPIOs
> via the device tree. This patch implements dt-support for the
> s3c24xx arches.
>
> The controllers contain only 3 cells, as the underlying gpio controller
> does not support controlling the drive strength on a gpio level.
>
> Tested with the gpio-keys driver on a s3c2416 based machine.
>
> Signed-off-by: Heiko Stuebner<heiko at sntech.de>
> Reviewed-by: Thomas Abraham<thomas.abraham at linaro.org>

Yeah, looks good to me...

Acked-by: Kukjin Kim <kgene.kim at samsung.com>

BTW, I'm not sure when we can support device tree for S3C24XX :-)

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.

> ---
> changes since v1:
> update bindings documentation to address SoC specific issues
>
>   .../devicetree/bindings/gpio/gpio-samsung.txt      |   43 +++++++++++++
>   drivers/gpio/gpio-samsung.c                        |   63 ++++++++++++++++++++
>   2 files changed, 106 insertions(+), 0 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
> index 5375625..f1e5dfe 100644
> --- a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
> +++ b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
> @@ -39,3 +39,46 @@ Example:
>   		#gpio-cells =<4>;
>   		gpio-controller;
>   	};
> +
> +
> +Samsung S3C24XX GPIO Controller
> +
> +Required properties:
> +- compatible: Compatible property value should be "samsung,s3c24xx-gpio".
> +
> +- reg: Physical base address of the controller and length of memory mapped
> +  region.
> +
> +- #gpio-cells: Should be 3. The syntax of the gpio specifier used by client nodes
> +  should be the following with values derived from the SoC user manual.
> +<[phandle of the gpio controller node]
> +      [pin number within the gpio controller]
> +      [mux function]
> +      [flags and pull up/down]
> +
> +  Values for gpio specifier:
> +  - Pin number: depending on the controller a number from 0 up to 15.
> +  - Mux function: Depending on the SoC and the gpio bank the gpio can be set
> +                  as input, output or a special function
> +  - Flags and Pull Up/Down: the values to use differ for the individual SoCs
> +                    example S3C2416/S3C2450:
> +                            0 - Pull Up/Down Disabled.
> +                            1 - Pull Down Enabled.
> +                            2 - Pull Up Enabled.
> +          Bit 16 (0x00010000) - Input is active low.
> +  Consult the user manual for the correct values of Mux and Pull Up/Down.
> +
> +- gpio-controller: Specifies that the node is a gpio controller.
> +- #address-cells: should be 1.
> +- #size-cells: should be 1.
> +
> +Example:
> +
> +	gpa: gpio-controller at 56000000 {
> +		#address-cells =<1>;
> +		#size-cells =<1>;
> +		compatible = "samsung,s3c24xx-gpio";
> +		reg =<0x56000000 0x10>;
> +		#gpio-cells =<3>;
> +		gpio-controller;
> +	};
> diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
> index ba126cc..54f6663 100644
> --- a/drivers/gpio/gpio-samsung.c
> +++ b/drivers/gpio/gpio-samsung.c
> @@ -938,6 +938,67 @@ static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip)
>   		s3c_gpiolib_track(chip);
>   }
>
> +#if defined(CONFIG_PLAT_S3C24XX)&&  defined(CONFIG_OF)
> +static int s3c24xx_gpio_xlate(struct gpio_chip *gc,
> +			const struct of_phandle_args *gpiospec, u32 *flags)
> +{
> +	unsigned int pin;
> +
> +	if (WARN_ON(gc->of_gpio_n_cells<  3))
> +		return -EINVAL;
> +
> +	if (WARN_ON(gpiospec->args_count<  gc->of_gpio_n_cells))
> +		return -EINVAL;
> +
> +	if (gpiospec->args[0]>  gc->ngpio)
> +		return -EINVAL;
> +
> +	pin = gc->base + gpiospec->args[0];
> +
> +	if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(gpiospec->args[1])))
> +		pr_warn("gpio_xlate: failed to set pin function\n");
> +	if (s3c_gpio_setpull(pin, gpiospec->args[2]&  0xffff))
> +		pr_warn("gpio_xlate: failed to set pin pull up/down\n");
> +
> +	if (flags)
> +		*flags = gpiospec->args[2]>>  16;
> +
> +	return gpiospec->args[0];
> +}
> +
> +static const struct of_device_id s3c24xx_gpio_dt_match[] __initdata = {
> +	{ .compatible = "samsung,s3c24xx-gpio", },
> +	{}
> +};
> +
> +static __init void s3c24xx_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
> +						 u64 base, u64 offset)
> +{
> +	struct gpio_chip *gc =&chip->chip;
> +	u64 address;
> +
> +	if (!of_have_populated_dt())
> +		return;
> +
> +	address = chip->base ? base + ((u32)chip->base&  0xfff) : base + offset;
> +	gc->of_node = of_find_matching_node_by_address(NULL,
> +			s3c24xx_gpio_dt_match, address);
> +	if (!gc->of_node) {
> +		pr_info("gpio: device tree node not found for gpio controller"
> +			" with base address %08llx\n", address);
> +		return;
> +	}
> +	gc->of_gpio_n_cells = 3;
> +	gc->of_xlate = s3c24xx_gpio_xlate;
> +}
> +#elif defined(CONFIG_PLAT_S3C24XX)
> +static __init void s3c24xx_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
> +						 u64 base, u64 offset)
> +{
> +	return;
> +}
> +#endif /* defined(CONFIG_PLAT_S3C24XX)&&  defined(CONFIG_OF) */
> +
>   static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
>   					     int nr_chips, void __iomem *base)
>   {
> @@ -962,6 +1023,8 @@ static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
>   			gc->direction_output = samsung_gpiolib_2bit_output;
>
>   		samsung_gpiolib_add(chip);
> +
> +		s3c24xx_gpiolib_attach_ofnode(chip, S3C24XX_PA_GPIO, i * 0x10);
>   	}
>   }
>



More information about the linux-arm-kernel mailing list