[PATCH v4 3/3] ARM: dts: imx6q-sabrelite: add eeti egalax

[Hui Wang]

Shawn Guo wrote:
> On Thu, Aug 16, 2012 at 06:47:31PM +0800, Hui Wang wrote:
>   
>> i.MX6Q sabrelite board uses i2c3 to connect an eeti egalax
>> touchscreen controller, add it as an i2c slave device in the dts.
>>
>> Signed-off-by: Hui Wang <jason77.wang at gmail.com>
>>     
>
> Looks good.  Will apply it after the driver part gets accepted.
>
>   
Got it, thanks.

Regards,
Hui.