April 2011 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Fri Apr 1 00:35:43 EDT 2011
Ending: Sat Apr 30 14:30:35 EDT 2011
Messages: 3421

• [PATCH] arm: omap2: enable smc instruction for sleep34xx   "Anderö, Oskar"
• [PATCH] arm: omap2: enable smc instruction for sleep34xx   "Anderö, Oskar"
• [PATCH] arm: omap2: enable smc instruction for sleep34xx   "Anderö, Oskar"
• kirkwood build failure on mainline   Arnaud Patard (Rtp)
• [PATCH 1/2] ARM: Make consolidated PM sleep code depend on PM_SLEEP   Arnaud Patard (Rtp)
• [PATCH] ARM: Remove clkdev.o build in arch/arm/common/Makefile   Thomas Abraham
• Cleanup Samsung stuff   Thomas Abraham
• [PATCH] ARM: Allow for kernel command line concatenation   Andrea Adami
• [PATCH v4 0/10] Support for NXP LPC2K SoCs   Ithamar R. Adema
• [RFC PATCH] Consolidate SRAM support   Ithamar R. Adema
• [PATCH 1/1] net/fec: do not pass NULL dev to DMA API   Dong Aisheng-B29396
• [PATCH 1/1] net/fec: do not pass NULL dev to DMA API   Aisheng.Dong
• [PATCH V7 02/17] SPEAr13xx: Add PCIe host controller base driver support.   Pratyush Anand
• Cleanup Samsung stuff   David Anders
• [patch 0/2] s3c24xx: add GPIO DT support   Domenico Andreoli
• [patch 1/2] Add dt_compat field to struct gpio_chip   Domenico Andreoli
• [patch 2/2] Add GPIO DT support to s3c24xx   Domenico Andreoli
• [patch 1/2] Add dt_compat field to struct gpio_chip   Domenico Andreoli
• [patch 0/2] s3c: DeviceTree bits for s3c24xx GPIO   Domenico Andreoli
• [patch 1/2] Add dt_compat field to struct s3c_gpio_chip   Domenico Andreoli
• [patch 2/2] Add GPIO DT support to s3c24xx   Domenico Andreoli
• [patch 2/2] Add GPIO DT support to s3c24xx   Domenico Andreoli
• [PATCH v3] Add GPIO DT support to s3c24xx   Domenico Andreoli
• [PATCH] increase the use of CONFIG_VECTORS_BASE   Domenico Andreoli
• [PATCH] CONFIG_VECTORS_BASE vs. 0xffff0000 documentation   Domenico Andreoli
• [PATCH] ARM: add DT support to the S3C SDI driver   Domenico Andreoli
• [PATCH] ARM: add DT support to the S3C SDI driver   Domenico Andreoli
• [PATCH] ARM: add DT support to the S3C SDI driver   Domenico Andreoli
• Cleanup Samsung stuff   Domenico Andreoli
• [PATCH] pxa/hx4700: bq24022 regulator needs to be enabled   Dmitry Artamonow
• [PATCH] pxa/hx4700: bq24022 regulator needs to be enabled   Dmitry Artamonow
• [PATCHv2 2.6.40 3/3] ARM:simpad: add GPIO based device definitions.   Dmitry Artamonow
• [PATCH] pxa/hx4700: use gpio arrays for global gpio initialization   Dmitry Artamonow
• [PATCH 0/2 v2] OMAP2/3: fix the i2c,gpio reset timeouts during boot.   Avinash.H.M
• [PATCH 1/2 v2] OMAP2/3: hwmod: fix the i2c-reset timeout during bootup   Avinash.H.M
• [PATCH 2/2 v2] OMAP2/3: hwmod: fix gpio-reset timeouts seen during bootup.   Avinash.H.M
• [PATCH 2/2 v2] OMAP2/3: hwmod: fix gpio-reset timeouts seen during bootup.   Avinash.H.M.
• [PATCH 1/2 v2] OMAP2/3: hwmod: fix the i2c-reset timeout during bootup   Avinash.H.M.
• [PATCH 1/2 v2] OMAP2/3: hwmod: fix the i2c-reset timeout during bootup   Avinash.H.M.
• [PATCH 10/14] PM / MIPS: Use struct syscore_ops instead of sysdevs for PM   Ralf Baechle
• [PATCH] arm: omap: introduce OMAP MCOP board file   Felipe Balbi
• [PATCH] arm: omap: introduce OMAP MCOP board file   Felipe Balbi
• [PATCH] arm: omap: introduce OMAP MCOP board file   Felipe Balbi
• [PATCHv3] omap: rx51: Platform support for lp5523 led chip   Felipe Balbi
• [PATCHv2] omap: rx51: Platform support for lp5523 led chip   Felipe Balbi
• [RFC][PATCH] axi: add AXI bus driver   Felipe Balbi
• [PATCH] Fixed gpio polarity of gpio USB-phy reset.   Felipe Balbi
• zaurus: mmcblk0: error -110   Chris Ball
• zaurus: mmcblk0: error -110   Chris Ball
• zaurus: mmcblk0: error -110   Chris Ball
• zaurus: mmcblk0: error -110   Chris Ball
• zaurus: mmcblk0: error -110   Chris Ball
• [PATCH] pxa270 rtc wakeup event fix   Nick Bane
• [PATCH] pxa270 rtc wakeup event fix   Nick Bane
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Jesse Barnes
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Jesse Barnes
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Jesse Barnes
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Jesse Barnes
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Jesse Barnes
• how can I cleanly exclude memory from the kernel memory allocator?   Larry Bassel
• how can I cleanly exclude memory from the kernel memory allocator?   Larry Bassel
• how can I cleanly exclude memory from the kernel memory allocator?   Larry Bassel
• [PATCH v2 0/4] s3c2440: mini2440: Add missing code parts to be fully working with latest kernel.   Marek Belisko
• [PATCH v2 1/4] s3c2440: mini2440: Add support for new LCD panels.   Marek Belisko
• [PATCH v2 2/4] s3c2440: mini2440: Add touchscreen support for mini2440.   Marek Belisko
• [PATCH v2 3/4] s3c2440: mini2440: Select touchscreen by default.   Marek Belisko
• [PATCH v2 4/4] s3c2440: mini2440: Use leds-gpio driver for board leds handling.   Marek Belisko
• [PATCH] ux500: Adding support for u8500 Hsem functionality.   Ohad Ben-Cohen
• [PATCH 1/2] ux500: Adding support for u8500 Hsem functionality V2   Ohad Ben-Cohen
• [PATCH 1/2] ux500: Adding support for u8500 Hsem functionality V2   Ohad Ben-Cohen
• [PATCH 1/2] ux500: Adding support for u8500 Hsem functionality V2   Ohad Ben-Cohen
• [GIT PULL] omap changes for v2.6.39 merge window   Arnd Bergmann
• [GIT PULL] omap changes for v2.6.39 merge window   Arnd Bergmann
• [GIT PULL] omap changes for v2.6.39 merge window   Arnd Bergmann
• [GIT PULL] omap changes for v2.6.39 merge window   Arnd Bergmann
• [GIT PULL] omap changes for v2.6.39 merge window   Arnd Bergmann
• [GIT PULL] omap changes for v2.6.39 merge window   Arnd Bergmann
• [GIT PULL] omap changes for v2.6.39 merge window   Arnd Bergmann
• [GIT PULL] omap changes for v2.6.39 merge window   Arnd Bergmann
• [PATCH 0/1] new module for amba axi on-chip interconnect   Arnd Bergmann
• [GIT PULL] omap changes for v2.6.39 merge window   Arnd Bergmann
• [GIT PULL] omap changes for v2.6.39 merge window   Arnd Bergmann
• [GIT PULL] omap changes for v2.6.39 merge window   Arnd Bergmann
• [GIT PULL] omap changes for v2.6.39 merge window   Arnd Bergmann
• [GIT PULL] omap changes for v2.6.39 merge window   Arnd Bergmann
• [GIT PULL] omap changes for v2.6.39 merge window   Arnd Bergmann
• [GIT PULL] omap changes for v2.6.39 merge window   Arnd Bergmann
• [GIT PULL] omap changes for v2.6.39 merge window   Arnd Bergmann
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Arnd Bergmann
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Arnd Bergmann
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Arnd Bergmann
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Arnd Bergmann
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Arnd Bergmann
• [PATCH V7 02/17] SPEAr13xx: Add PCIe host controller base driver support.   Arnd Bergmann
• [PATCH 1/2] ux500: Adding support for u8500 Hsem functionality V2   Arnd Bergmann
• [RFC PATCH] Consolidate SRAM support   Arnd Bergmann
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Arnd Bergmann
• [RFC PATCH] Consolidate SRAM support   Arnd Bergmann
• [PATCH 1/3] Framework for exporting System-on-Chip information via sysfs   Arnd Bergmann
• [PATCH 2/3] mach-ux500: export System-on-Chip information via sysfs   Arnd Bergmann
• [PATCH 3/3] Add documenation for new sysfs devices/soc functionallity   Arnd Bergmann
• [PATCH V7 02/17] SPEAr13xx: Add PCIe host controller base driver support.   Arnd Bergmann
• [PATCH 1/2] ux500: Adding support for u8500 Hsem functionality V2   Arnd Bergmann
• [PATCH 2/2] mach-u300: rewrite gpio driver, move to drivers/gpio   Arnd Bergmann
• [RFC 0/4] convert stmp into mxs and delete the obsolete platform   Arnd Bergmann
• [PATCH V14 1/4] ptp: Added a brand new class driver for ptp clocks.   Arnd Bergmann
• [PATCH V14 3/4] ptp: Added a clock driver for the IXP46x.   Arnd Bergmann
• [RFC 0/4] convert stmp into mxs and delete the obsolete platform   Arnd Bergmann
• [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache   Arnd Bergmann
• [PATCH V14 3/4] ptp: Added a clock driver for the IXP46x.   Arnd Bergmann
• [PATCH V14 3/4] ptp: Added a clock driver for the IXP46x.   Arnd Bergmann
• [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache   Arnd Bergmann
• [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache   Arnd Bergmann
• [PATCH 2/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Arnd Bergmann
• [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache   Arnd Bergmann
• [PATCH 4/7] v4l: videobuf2: add IOMMU based DMA memory allocator   Arnd Bergmann
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Arnd Bergmann
• [PATCH 4/7] v4l: videobuf2: add IOMMU based DMA memory allocator   Arnd Bergmann
• [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache   Arnd Bergmann
• [PATCH 2/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Arnd Bergmann
• [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache   Arnd Bergmann
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Arnd Bergmann
• Status of arch/arm in linux-next   Arnd Bergmann
• [PATCH 2/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Arnd Bergmann
• [PATCH 2/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Arnd Bergmann
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Arnd Bergmann
• Status of arch/arm in linux-next   Arnd Bergmann
• [PATCH 2/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Arnd Bergmann
• Status of arch/arm in linux-next   Arnd Bergmann
• [PATCH 1/2] ux500: Adding support for u8500 Hsem functionality V2   Arnd Bergmann
• Status of arch/arm in linux-next   Arnd Bergmann
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Arnd Bergmann
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Arnd Bergmann
• Status of arch/arm in linux-next   Arnd Bergmann
• [PATCH 1/3] bitops: add ifdef CONFIG_GENERIC_FIND_BIT_LE guard   Arnd Bergmann
• [PATCH 2/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Arnd Bergmann
• Status of arch/arm in linux-next   Arnd Bergmann
• [PATCH 1/3] bitops: add ifdef CONFIG_GENERIC_FIND_BIT_LE guard   Arnd Bergmann
• [PATCH 1/3] Framework for exporting System-on-Chip information via sysfs   Arnd Bergmann
• [PATCH 2/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Arnd Bergmann
• [PATCH] drivers: brcmaxi: provide amba axi functionality in separate module   Arnd Bergmann
• [PATCH 2/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Arnd Bergmann
• [PATCH] drivers: brcmaxi: provide amba axi functionality in separate module   Arnd Bergmann
• [RFC] ARM DMA mapping TODO, v1   Arnd Bergmann
• Status of arch/arm in linux-next   Arnd Bergmann
• [PATCH 2/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Arnd Bergmann
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Arnd Bergmann
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Arnd Bergmann
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Arnd Bergmann
• [RFC] ARM DMA mapping TODO, v1   Arnd Bergmann
• [PATCH V7 02/17] SPEAr13xx: Add PCIe host controller base driver support.   Arnd Bergmann
• [RFC] ARM DMA mapping TODO, v1   Arnd Bergmann
• [RFC] ARM DMA mapping TODO, v1   Arnd Bergmann
• [PATCH v4 01/11] mfd: add pruss mfd driver.   Arnd Bergmann
• [PATCH v4 1/1] can: add pruss CAN driver.   Arnd Bergmann
• since when does ARM map the kernel memory in sections?   Arnd Bergmann
• [PATCH v4 01/11] mfd: add pruss mfd driver.   Arnd Bergmann
• ARM unaligned MMIO access with attribute((packed))   Arnd Bergmann
• MMC and reliable write - was: since when does ARM map the kernel memory in sections?   Arnd Bergmann
• [RFC] ARM DMA mapping TODO, v1   Arnd Bergmann
• [RFC] ARM DMA mapping TODO, v1   Arnd Bergmann
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Arnd Bergmann
• [PATCH v4 01/11] mfd: add pruss mfd driver.   Arnd Bergmann
• [PATCH v4 01/11] mfd: add pruss mfd driver.   Arnd Bergmann
• [RFC] ARM DMA mapping TODO, v1   Arnd Bergmann
• [RFC] ARM DMA mapping TODO, v1   Arnd Bergmann
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Arnd Bergmann
• [RFC] ARM DMA mapping TODO, v1   Arnd Bergmann
• [RFC] ARM DMA mapping TODO, v1   Arnd Bergmann
• ARM unaligned MMIO access with attribute((packed))   Arnd Bergmann
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Arnd Bergmann
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Arnd Bergmann
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Arnd Bergmann
• [RFC] ARM DMA mapping TODO, v1   Arnd Bergmann
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Arnd Bergmann
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Arnd Bergmann
• [PATCH 1/3] MTD: atmel_nand: modify test case for using DMA operations   Artem Bityutskiy
• [PATCH 2/3] MTD: atmel_nand: trivial: change DMA usage information trace   Artem Bityutskiy
• [PATCH 3/3] MTD/atmel_nand: Fix support for CPUs that do not support DMA access   Artem Bityutskiy
• [PATCH 1/3 v2] MTD: atmel_nand: modify test case for using DMA operations   Artem Bityutskiy
• [PATCH 3/3] MTD/atmel_nand: Fix support for CPUs that do not support DMA access   Artem Bityutskiy
• [PATCH 3/3] MTD/atmel_nand: Fix support for CPUs that do not support DMA access   Artem Bityutskiy
• [PATCH] MTD: atmel_nand: Fall back to CPU I/O when buffer is in vmalloc(ed) region   Artem Bityutskiy
• [PATCH 00/34] Make kernel build deterministic   Artem Bityutskiy
• [PATCH V2 1/2] mtd: nand: Allow NAND chip ids to be included standalone.   Artem Bityutskiy
• [PATCH 00/34] Make kernel build deterministic   Artem Bityutskiy
• [PATCH 2/2] mtd: msm_nand: Add initial msm nand driver support.   Artem Bityutskiy
• [PATCH 1/2] MTD: s3c2410_nand: Add option to disable hw ECC at runtime   Artem Bityutskiy
• [PATCH 2/2] mtd: msm_nand: Add initial msm nand driver support.   Artem Bityutskiy
• [PATCH 2/2] mtd: msm_nand: Add initial msm nand driver support.   Artem Bityutskiy
• [PATCH 2/2] mtd: msm_nand: Add initial msm nand driver support.   Artem Bityutskiy
• [PATCH V2 2/2] mtd: msm_nand: Add initial msm nand driver support.   Artem Bityutskiy
• [PATCH v3] ARM: omap2: mtd split nand_scan in ident and tail   Artem Bityutskiy
• MT_HIGH_VECTOR mapping set read-only creating illegal access   Michael Bohan
• MT_HIGH_VECTOR mapping set read-only creating illegal access   Michael Bohan
• MT_HIGH_VECTOR mapping set read-only creating illegal access   Michael Bohan
• console_cpu_notify can cause scheduling BUG during CPU hotplug   Michael Bohan
• console_cpu_notify can cause scheduling BUG during CPU hotplug   Michael Bohan
• console_cpu_notify can cause scheduling BUG during CPU hotplug   Michael Bohan
• [PATCH] ARM: Allow for kernel command line concatenation   Boivie, Victor
• [PATCH] ARM: Allow for kernel command line concatenation   Boivie, Victor
• [PATCH] ARM: Allow for kernel command line concatenation   Paul Bolle
• [PATCH 00/34] Make kernel build deterministic   James Bottomley
• [PATCH] ARM: Allow for kernel command line concatenation   Nick Bowler
• [RFC][PATCH] axi: add AXI bus driver   Nick Bowler
• [PATCH] ARM: BUG() dies silently   Stephen Boyd
• [PATCH] ARM: BUG() dies silently   Stephen Boyd
• [PATCH] ARM: hw_breakpoint: clear DBGVCR out of reset   Stephen Boyd
• [PATCHv2] ARM: Use asm-generic/sizes.h   Stephen Boyd
• [PATCH] msm: Makefile: Separate machines from arches   Stephen Boyd
• [PATCH] ARM: BUG() dies silently   Stephen Boyd
• [PATCHv4 2/4] ARM: Allow machines to override __delay()   Stephen Boyd
• [PATCHv5 0/3] Constant udelay() for SMP and non-SMP systems   Stephen Boyd
• [PATCHv5 1/3] ARM: Translate delay.S into (mostly) C   Stephen Boyd
• [PATCHv5 2/3] ARM: Allow machines to override __delay()   Stephen Boyd
• [PATCHv5 3/3] ARM: Implement a timer based __delay() loop   Stephen Boyd
• [PATCHv5 1/3] ARM: Translate delay.S into (mostly) C   Stephen Boyd
• [PATCH v3] ARM: Use generic BUG() handler   Stephen Boyd
• [PATCH v3] ARM: Use generic BUG() handler   Stephen Boyd
• [PATCH] ARM: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORS   Stephen Boyd
• [RFC PATCHv2 09/20] ARM: architected timers: add A15 architected timers   Stephen Boyd
• [PATCH] ARM: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORS   Stephen Boyd
• [FAILED] BLD i.MX51 Referenz + linux-next git kernel   Stephen Boyd
• [PATCH 1/2] ARM: the ADDR_NO_RANDOMIZE personality flag should be honored with mmap()   Stephen Boyd
• [PATCH v4] ARM: Use generic BUG() handler   Stephen Boyd
• [PATCH] ARM: allow hotplug on msm   Stephen Boyd
• [PATCH 06/10] clk: Add support for a generic clock multiplexer   Stephen Boyd
• [PATCH 06/10] clk: Add support for a generic clock multiplexer   Stephen Boyd
• [PATCH 05/10] clk: Add support for simple dividers   Stephen Boyd
• [PATCH 05/10] clk: Add support for simple dividers   Stephen Boyd
• [PATCH 04/10] clk: implement parent pass through functions   Stephen Boyd
• [PATCH v4] ARM: Use generic BUG() handler   Stephen Boyd
• [PATCH] ARM: Mark broadcast_timer_setup() __cpuinit   Stephen Boyd
• [PATCH] msm: timer: Fix DGT rate on 8960 and 8660   Stephen Boyd
• [patch 01/16] time: Provide clocksource based sched_clock()   Stephen Boyd
• [patch 03/16] arm: s5p: Use clocksource based sched_clock   Stephen Boyd
• [RFC PATCH 02/12] ARM: smp_twd: add support for remapped PPI interrupts   Stephen Boyd
• [RFC PATCH 01/12] ARM: gic: add per-cpu interrupt multiplexer   Stephen Boyd
• [RFC PATCH 02/12] ARM: smp_twd: add support for remapped PPI interrupts   Stephen Boyd
• [patch 01/16] time: Provide clocksource based sched_clock()   Stephen Boyd
• [RFC PATCH 08/12] ARM: msm: use remapped PPI interrupts for local timer   Stephen Boyd
• Resend [PATCH 00/10] ARM: SMP initialization consolidation   Stephen Boyd
• i.MX27 SPI tx fifo underrun   Jurgen Braam
• [RFC PATCH v2 1/3] PM / Core: suspend_again callback for device PM.   Stanislav Brabec
• [alsa-devel][PATCH 3/3] SoC: SAMSUNG: Add WM8580 PCM Machine driver   Jassi Brar
• S3C2416, S3C2443 HS-SPI driver?   Jassi Brar
• [GIT PULL] omap changes for v2.6.39 merge window   David Brown
• [PATCH V2 1/2] mtd: nand: Allow NAND chip ids to be included standalone.   David Brown
• [PATCH 4/6] ARM: msm: update GPIO chained IRQ handler to use entry/exit functions   David Brown
• [GIT PULL for 39-rc4] msm: minor fixes   David Brown
• [PM8921 MFD V5 5/6] MAINTAINERS: Add patterns for pmic 8921 files to MSM subsystem   David Brown
• [PM8921 MFD V5 0/6] pm8921 core and subdevices   David Brown
• [PATCH V2 2/2] mtd: msm_nand: Add initial msm nand driver support.   David Brown
• [PATCH 00/10] ARM: SMP initialization consolidation   David Brown
• [PATCH 1/2] regulator: pm8921-regulator: Add regulator driver for PM8921   Mark Brown
• [GIT PULL] omap changes for v2.6.39 merge window   Mark Brown
• [GIT PULL] omap changes for v2.6.39 merge window   Mark Brown
• [PATCH 1/3] sound/spitz: Properly handle MIC GPIO   Mark Brown
• [PATCH 2/3] Use gpio_set_value_cansleep() in corgi_lcd.c   Mark Brown
• [PATCH 1/2] regulator: pm8921-regulator: Add regulator driver for PM8921   Mark Brown
• [PATCH 1/2] mach-ux500: voltage domain regulators for DB8500   Mark Brown
• [alsa-devel] [PATCH 3/3] SoC: SAMSUNG: Add WM8580 PCM Machine driver   Mark Brown
• gpio.h interaction with other headers issue on pxa (maybe arm in general?)   Mark Brown
• [PATCH] ARM: S3C64XX: Initial support for Wolfson/Simtec Cragganmore/Banff   Mark Brown
• [PATCH] i2c: QUP based bus driver for Qualcomm MSM chipsets   Mark Brown
• [PATCH] ARM: s3c2440: gta02; Register dfbmcs320 device   Mark Brown
• [PATCH] ARM: S3C64XX: Initial support for Wolfson/Simtec Cragganmore/Banff   Mark Brown
• [PATCH] ARM: S3C64XX: Initial support for Wolfson/Simtec Cragganmore/Banff   Mark Brown
• [PATCH 0/2] Common struct clk implementation, v14   Mark Brown
• Status of arch/arm in linux-next   Mark Brown
• Status of arch/arm in linux-next   Mark Brown
• Status of arch/arm in linux-next   Mark Brown
• Status of arch/arm in linux-next   Mark Brown
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Mark Brown
• Status of arch/arm in linux-next   Mark Brown
• Status of arch/arm in linux-next   Mark Brown
• Status of arch/arm in linux-next   Mark Brown
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Mark Brown
• Status of arch/arm in linux-next   Mark Brown
• Cleanup Samsung stuff   Mark Brown
• Status of arch/arm in linux-next   Mark Brown
• Status of arch/arm in linux-next   Mark Brown
• Status of arch/arm in linux-next   Mark Brown
• [PATCH RFC] clk: add support for automatic parent handling   Mark Brown
• [PATCH RFC] clk: add support for automatic parent handling   Mark Brown
• [PATCH RFC] clk: add support for automatic parent handling   Mark Brown
• [PATCH RFC] clk: add support for automatic parent handling   Mark Brown
• Common clock and dvfs   Mark Brown
• Common clock and dvfs   Mark Brown
• [PATCH RFC] clk: add support for automatic parent handling   Mark Brown
• [RFC] What is the preferred way to share ADC unit between hwmon and input(ts) drivers?   Mark Brown
• Common clock and dvfs   Mark Brown
• [rtc-linux] Re: [PATCH V4 resend] rtc: Adding support for spear rtc   Mark Brown
• [PATCH RFC] clk: add support for automatic parent handling   Mark Brown
• [alsa-devel] [PATCH] ASoC: prevent compilers from optimising pll calculation into __aeabi__uldivmod   Mark Brown
• [PATCH] ARM: SAMSUNG: Add support for pre-sleep/post-restore gpio control   Mark Brown
• [PATCH] ARM: S3C6410: Support 800MHz operation in cpufreq   Mark Brown
• [PATCH] ARM: S3C6410: Add some lower frequencies for 800MHz base clock operation   Mark Brown
• [RFC][PATCH] bcmai: introduce AI driver   Michael Büsch
• [RFC][PATCH] bcmai: introduce AI driver   Michael Büsch
• [RFC][PATCH] bcmai: introduce AI driver   Michael Büsch
• [RFC][PATCH] bcmai: introduce AI driver   Michael Büsch
• [PATCH V2 2/2] mtd: msm_nand: Add initial msm nand driver support.   Matthieu CASTET
• [PATCH V2 2/2] mtd: msm_nand: Add initial msm nand driver support.   Matthieu CASTET
• [PATCH] kirkwood: add dir-665 support   Hirundo Cam
• [PATCH] kirkwood: add dir-665 support   Hirundo Cam
• gpio.h interaction with other headers issue on pxa (maybe arm in general?)   Jonathan Cameron
• [PATCH] arm: cputype.h uses __attribute_const__ which requires including kernel.h   Jonathan Cameron
• [PATCH 2/14] PM: Add missing syscore_suspend() and syscore_resume() calls   Ian Campbell
• console_cpu_notify can cause scheduling BUG during CPU hotplug   Kevin Cernekee
• [PATCH] arm: mach-msm: acpclock-arm11: Fix some code style issues   Chihau Chau
• [PATCH] arm: mach-msm: acpuclock-arm11: Using __func__ instead __FUNCTION__   Chihau Chau
• [RFC] Extending ARM perf-events for multiple PMUs   Ashwin Chaugule
• [RFC] Extending ARM perf-events for multiple PMUs   Ashwin Chaugule
• [RFC] Extending ARM perf-events for multiple PMUs   Ashwin Chaugule
• [RFC] Extending ARM perf-events for multiple PMUs   Ashwin Chaugule
• [RFC] Extending ARM perf-events for multiple PMUs   Ashwin Chaugule
• [PATCH] ARM: perf: remove erroneous check on active_events   Ashwin Chaugule
• [PATCH 00/34] Make kernel build deterministic   Mauro Carvalho Chehab
• [PATCH 2.6.39] V4L: videobuf-dma-contig: fix mmap_mapper broken on ARM   Mauro Carvalho Chehab
• [REVERT] Re: V4L: videobuf-dma-contig: fix mmap_mapper broken on ARM   Mauro Carvalho Chehab
• [PATCH] ARM: mx53/loco: add pwm backlight device   Jason Chen
• [PATCH 5/7] ARM i.MX53 loco: Add framebuffer support   Jason Chen
• [PATCH 2/7] ARM i.MX5: Add IPU device support   Jason Chen
• [PATCH 1/7] Add a mfd IPUv3 driver   Jason Chen
• [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache   KyongHo Cho
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   KyongHo Cho
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   KyongHo Cho
• [PATCH RFC] util-linux: readprofile: don't stop parsing at __init_end   Po-Yu Chuang
• [PATCH v2 00/12] mmc: use nonblock mmc requests to minimize latency   Jae hoon Chung
• [PATCH v2 00/12] mmc: use nonblock mmc requests to minimize latency   Jae hoon Chung
• [PATCH] mmc: sdhci: add support for pre_req and post_req   Jaehoon Chung
• [PATCH] mmc: sdhci: add support for pre_req and post_req   Jaehoon Chung
• [PATCH] ARM: s3c2440: gta02; Register dfbmcs320 device   Lars-Peter Clausen
• [PATCH 10/14] PM / MIPS: Use struct syscore_ops instead of sysdevs for PM   Lars-Peter Clausen
• [RFC patch 00/20] Interrupt chip consolidation   Lars-Peter Clausen
• [RFC patch 00/20] Interrupt chip consolidation   Lars-Peter Clausen
• [PATCH 1/2] ARM: Differentiate SheevaPlugs and DockStars on the basis of the memory size.   Alexander Clouter
• [GIT PULL] omap changes for v2.6.39 merge window   Richard Cochran
• [PATCH V14 0/4] ptp: IEEE 1588 hardware clock support   Richard Cochran
• [PATCH V14 1/4] ptp: Added a brand new class driver for ptp clocks.   Richard Cochran
• [PATCH V14 2/4] ptp: Added a clock that uses the eTSEC found on the MPC85xx.   Richard Cochran
• [PATCH V14 3/4] ptp: Added a clock driver for the IXP46x.   Richard Cochran
• [PATCH V14 4/4] ptp: Added a clock driver for the National Semiconductor PHYTER.   Richard Cochran
• [PATCH V14 3/4] ptp: Added a clock driver for the IXP46x.   Richard Cochran
• [PATCH V14 3/4] ptp: Added a clock driver for the IXP46x.   Richard Cochran
• [PATCH V14 4/4] ptp: Added a clock driver for the National Semiconductor PHYTER.   Richard Cochran
• [PATCH V15 0/4] ptp: IEEE 1588 hardware clock support   Richard Cochran
• [PATCH V15 1/4] ptp: Added a brand new class driver for ptp clocks.   Richard Cochran
• [PATCH V15 2/4] ptp: Added a clock that uses the eTSEC found on the MPC85xx.   Richard Cochran
• [PATCH V15 3/4] ptp: Added a clock driver for the IXP46x.   Richard Cochran
• [PATCH V15 4/4] ptp: Added a clock driver for the National Semiconductor PHYTER.   Richard Cochran
• [PATCH 1/2] regulator: pm8921-regulator: Add regulator driver for PM8921   David Collins
• [PATCH 1/2] regulator: pm8921-regulator: Add regulator driver for PM8921   David Collins
• [PATCH v2 0/2] regulator: msm: Add PM8921 regulator driver   David Collins
• [PATCH v2 1/2] regulator: pm8921-regulator: Add regulator driver for PM8921   David Collins
• [PATCH v2 2/2] msm: board-8960: Add support for pm8921-regulator   David Collins
• [PATCH 1/2] ARM: Differentiate SheevaPlugs and DockStars on the basis of the memory size.   Eric Cooper
• [PATCH] atmel_serial: keep the platform_device unchanged   Alan Cox
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Alan Cox
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Alan Cox
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Alan Cox
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Alan Cox
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Alan Cox
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Alan Cox
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Alan Cox
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Alan Cox
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Alan Cox
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Alan Cox
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Alan Cox
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Alan Cox
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Alan Cox
• [RFC] ARM DMA mapping TODO, v1   Alan Cox
• OMAP2+: UART: Remove uart clock handling code from serial.c   Alan Cox
• [PATCH 2/6] ARM: tegra: update GPIO chained IRQ handler to use entry/exit functions   Colin Cross
• [PATCH 6/6] ARM: gic: use handle_fasteoi_irq for SPIs   Colin Cross
• [PATCH] arm: tegra: fix error check in tegra2_clocks.c   Colin Cross
• [pm-core][PATCH v3 01/21] OMAP4: PM: Add omap WakeupGen module support   Colin Cross
• RFC, GIC based smp_cross_call cleanup suggestion   Colin Cross
• [pm-core][PATCH v3 01/21] OMAP4: PM: Add omap WakeupGen module support   Colin Cross
• [PATCH 6/6] ARM: gic: use handle_fasteoi_irq for SPIs   Colin Cross
• RFC, GIC based smp_cross_call cleanup suggestion   Colin Cross
• [PATCH 6/6] ARM: gic: use handle_fasteoi_irq for SPIs   Colin Cross
• since when does ARM map the kernel memory in sections?   Colin Cross
• ARM Tegra fixes for 2.6.39-rc4   Colin Cross
• MT_HIGH_VECTOR mapping set read-only creating illegal access   Colin Cross
• how can I cleanly exclude memory from the kernel memory allocator?   Colin Cross
• [PATCH RFC] clk: add support for automatic parent handling   Colin Cross
• [PATCH RFC] clk: add support for automatic parent handling   Colin Cross
• Common clock and dvfs   Colin Cross
• Common clock and dvfs   Colin Cross
• Common clock and dvfs   Colin Cross
• [PATCH] ARM: tegra: consolidate GIC extension usage   Colin Cross
• [PATCH] ARM: tegra: consolidate GIC extension usage   Colin Cross
• [PATCH 6/6] ARM: gic: use handle_fasteoi_irq for SPIs   Colin Cross
• [PATCH 6/6] ARM: gic: use handle_fasteoi_irq for SPIs   Colin Cross
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Jordan Crouse
• [PATCH v2] OMAP: iovmm: fix SW flags passed by user   Hiroshi DOYU
• [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache   Hiroshi DOYU
• [PATCH 1/2] video: add Samsung SoC MIPI-DSI controller driver.   Inki Dae
• [PATCH 2/2] video: Samsung SoC MIPI-DSI based sample lcd panel driver.   Inki Dae
• RFC, GIC based smp_cross_call cleanup suggestion   Magnus Damm
• [RFC PATCH] Consolidate SRAM support   Magnus Damm
• [PATCH] clkdev: add support to lookup for early platform device   Magnus Damm
• [PATCH] clkdev: add support to lookup for early platform device   Magnus Damm
• [PATCH] clkdev: add support to lookup for early platform device   Magnus Damm
• [RFC PATCH] genirq: implement read_irq_line for interrupt lines   David Daney
• [PATCH] ARM: perf: ensure pass through zero is counted on overflow   Will Deacon
• [PATCH] ARM: hw_breakpoint: clear DBGVCR out of reset   Will Deacon
• [PATCH 0/6] Use chained handler entry/exit functions in platform code   Will Deacon
• [PATCH 1/6] ARM: omap: update GPIO chained IRQ handler to use entry/exit functions   Will Deacon
• [PATCH 2/6] ARM: tegra: update GPIO chained IRQ handler to use entry/exit functions   Will Deacon
• [PATCH 3/6] ARM: s5pv310: update IRQ combiner to use chained entry/exit functions   Will Deacon
• [PATCH 4/6] ARM: msm: update GPIO chained IRQ handler to use entry/exit functions   Will Deacon
• [PATCH 5/6] ARM: nmk: update GPIO chained IRQ handler to entry/exit functions   Will Deacon
• [PATCH 6/6] ARM: gic: use handle_fasteoi_irq for SPIs   Will Deacon
• [GIT PULL] omap changes for v2.6.39 merge window   Will Deacon
• accessing vfpinstr macros from outside vfp directory   Will Deacon
• [PATCH 2/6] ARM: tegra: update GPIO chained IRQ handler to use entry/exit functions   Will Deacon
• [PATCH 6/6] ARM: gic: use handle_fasteoi_irq for SPIs   Will Deacon
• [PATCH 6/6] ARM: gic: use handle_fasteoi_irq for SPIs   Will Deacon
• [PATCH] ARM: hw_breakpoint: clear DBGVCR out of reset   Will Deacon
• accessing vfpinstr macros from outside vfp directory   Will Deacon
• [PATCH 6/6] ARM: gic: use handle_fasteoi_irq for SPIs   Will Deacon
• [PATCH] ARM: futex: add SMP futex support when !CPU_USE_DOMAINS   Will Deacon
• [RESEND][PATCH] ARM: memmap: only free allocated memmap entries when using SPARSEMEM   Will Deacon
• [RFC] Extending ARM perf-events for multiple PMUs   Will Deacon
• [RFC] Extending ARM perf-events for multiple PMUs   Will Deacon
• [RFC] Extending ARM perf-events for multiple PMUs   Will Deacon
• [RFC] Extending ARM perf-events for multiple PMUs   Will Deacon
• [RFC] Extending ARM perf-events for multiple PMUs   Will Deacon
• [RFC] Extending ARM perf-events for multiple PMUs   Will Deacon
• [PATCH v2 0/6] Use chained handler entry/exit functions in platform code   Will Deacon
• [PATCH 1/6] ARM: omap: update GPIO chained IRQ handler to use entry/exit functions   Will Deacon
• [PATCH 2/6] ARM: tegra: update GPIO chained IRQ handler to use entry/exit functions   Will Deacon
• [PATCH 3/6] ARM: s5pv310: update IRQ combiner to use chained entry/exit functions   Will Deacon
• [PATCH 4/6] ARM: msm: update GPIO chained IRQ handler to use entry/exit functions   Will Deacon
• [PATCH 5/6] ARM: nmk: update GPIO chained IRQ handler to entry/exit functions   Will Deacon
• [PATCH 6/6] ARM: gic: use handle_fasteoi_irq for SPIs   Will Deacon
• [PATCH] Fix infinite loop in ARM user perf_event backtrace code   Will Deacon
• [PATCH 4/6] ARM: msm: update GPIO chained IRQ handler to use entry/exit functions   Will Deacon
• [PATCH 4/6] ARM: msm: update GPIO chained IRQ handler to use entry/exit functions   Will Deacon
• [PATCH 5/6] ARM: nmk: update GPIO chained IRQ handler to entry/exit functions   Will Deacon
• [PATCH 6/6] ARM: gic: use handle_fasteoi_irq for SPIs   Will Deacon
• [PATCH] ARM: futex: add SMP futex support when !CPU_USE_DOMAINS   Will Deacon
• [RESEND][PATCH] ARM: memmap: only free allocated memmap entries when using SPARSEMEM   Will Deacon
• [PATCH] ARM: futex: add SMP futex support when !CPU_USE_DOMAINS   Will Deacon
• [PATCH] ARM: tegra: consolidate GIC extension usage   Will Deacon
• [PATCH] ARM: perf: remove erroneous check on active_events   Will Deacon
• [PATCH 1/3] i2c: append hardware lock with bus lock   Jean Delvare
• [PATCH 1/3] i2c: append hardware lock with bus lock   Jean Delvare
• [RFC PATCH] genirq: implement read_irq_line for interrupt lines   Mathieu Desnoyers
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Alex Deucher
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Stijn Devriendt
• [PATCH 1/2] gpio: add a custom configuration mechanism to gpiolib   Stijn Devriendt
• [PM8921 MFD V5 0/6] pm8921 core and subdevices   Abhijeet Dharmapurikar
• [PM8921 MFD V5 1/6] mfd: pm8921: Add PMIC 8921 core driver   Abhijeet Dharmapurikar
• [PM8921 MFD V5 2/6] mfd: pm8xxx: Add irq support   Abhijeet Dharmapurikar
• [PM8921 MFD V5 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver   Abhijeet Dharmapurikar
• [PM8921 MFD V5 4/6] mfd: pm8xxx-mpp: Add pm8xxx MPP driver   Abhijeet Dharmapurikar
• [PM8921 MFD V5 5/6] MAINTAINERS: Add patterns for pmic 8921 files to MSM subsystem   Abhijeet Dharmapurikar
• [PM8921 MFD V5 6/6] msm: board-8960: Add support for pm8921   Abhijeet Dharmapurikar
• [RFC PATCH] genirq: implement read_irq_line for interrupt lines   Abhijeet Dharmapurikar
• [RFC PATCH] genirq: implement read_irq_line for interrupt lines   Abhijeet Dharmapurikar
• [RFC PATCH] genirq: implement read_irq_line for interrupt lines   Abhijeet Dharmapurikar
• [RFC PATCH] genirq: implement read_irq_line for interrupt lines   Abhijeet Dharmapurikar
• [RFC PATCH] genirq: implement read_irq_line for interrupt lines   Abhijeet Dharmapurikar
• [PATCH 4/6] ARM: msm: update GPIO chained IRQ handler to use entry/exit functions   Abhijeet Dharmapurikar
• [PATCH 6/6] ARM: gic: use handle_fasteoi_irq for SPIs   Abhijeet Dharmapurikar
• genirq: Implement a generic interrupt chip   Abhijeet Dharmapurikar
• arm: orion: Use generic irq chip   Abhijeet Dharmapurikar
• arm: msm: Convert sirc to generic irq chip   Abhijeet Dharmapurikar
• arm: msm: Convert irq-vic to generic irq chip   Abhijeet Dharmapurikar
• arm: msm: Convert irq-vic to generic irq chip   Abhijeet Dharmapurikar
• [RFC PATCH 01/12] ARM: gic: add per-cpu interrupt multiplexer   Abhijeet Dharmapurikar
• [PATCH 0/2] fix mpp and gpio for pm8921   Abhijeet Dharmapurikar
• [PATCH 1/2] gpio: pm8xxx-gpio: Add pm8xxx gpio driver   Abhijeet Dharmapurikar
• [PATCH 2/2] mfd: pm8xxx-mpp: Add pm8xxx MPP driver   Abhijeet Dharmapurikar
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Kurt Van Dijck
• [RFC] What is the preferred way to share ADC unit between hwmon and input(ts) drivers?   Kurt Van Dijck
• [RFC PATCH] Consolidate SRAM support   Nguyen Dinh-R00091
• [RFC PATCH] Consolidate SRAM support   Nguyen Dinh-R00091
• [RFC PATCH] Consolidate SRAM support   Nguyen Dinh-R00091
• [PATCH 4/4] omap: musb: introduce default baord config   Oleg Drokin
• [PATCH 4/4] omap: musb: introduce default baord config   Oleg Drokin
• [PATCH 4/4] omap: musb: introduce default baord config   Oleg Drokin
• [PATCH] nand: Fix S3C NAND clock stop   Randy Dunlap
• [PATCH 11/14] PM / AVR32: Use struct syscore_ops instead of sysdevs for PM   Hans-Christian Egtvedt
• [PATCH 1/6] arch: add #define for each of optimized find bitops   Hans-Christian Egtvedt
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Anca Emanuel
• [PATCH 1/2] pcmcia: limit pxa2xx_balloon3 subdriver to balloon3 platform   Dmitry Eremin-Solenikov
• [PATCH 2/2] pcmcia: limit pxa2xx_trizeps4 subdriver to trizeps4 platform   Dmitry Eremin-Solenikov
• [PATCH 1/7] balloon3: drop udc_is_connected   Dmitry Eremin-Solenikov
• [PATCH 2/7] mioa701: drop udc_is_connected   Dmitry Eremin-Solenikov
• [PATCH 3/7] stargate2: udc_is_connected is ignored for pxa27x, drop it   Dmitry Eremin-Solenikov
• [PATCH 4/7] pxa25x: separate lubbock handling to lubbock-usb transceiver   Dmitry Eremin-Solenikov
• [PATCH 5/7] lubbock: switch to using lubbock_usb_xceiv transceiver   Dmitry Eremin-Solenikov
• [PATCH 6/7] pxa25x: drop handling of udc_is_connected   Dmitry Eremin-Solenikov
• [PATCH 7/7] gpio-vbus: ask for vbus_draw regulator before registering xceiv   Dmitry Eremin-Solenikov
• [PATCH 2/7] mioa701: drop udc_is_connected   Dmitry Eremin-Solenikov
• [PATCH 6/7] pxa25x: drop handling of udc_is_connected   Dmitry Eremin-Solenikov
• [PATCH 4/7] pxa25x: separate lubbock handling to lubbock-usb transceiver   Dmitry Eremin-Solenikov
• [PATCH 0/2] ARM: Unify setup for Marvell SheevaPlugs and Seagate DockStars   Nico Erfurth
• [PATCH 0/2] ARM: Unify setup for Marvell SheevaPlugs and Seagate DockStars   Nico Erfurth
• Status of arch/arm in linux-next   Nico Erfurth
• Status of arch/arm in linux-next   Nico Erfurth
• [patch 08/16] arm: pxa: Use clocksource based sched_clock   Eric
• [PATCH 1/3] ARM: mx5/mx53_loco: Add write-protect and card-detect for SD3   Fabio Estevam
• [PATCH 2/3] ARM: mach-mx5/mx53_evk.c: Fix SD3 registration   Fabio Estevam
• [PATCH 3/3] ARM: mx5/mx53_evk: Add write-protect and card-detect for SD1 and SD3   Fabio Estevam
• [PATCH] ARM: mx5/mx53_smd: Add esdhc support   Fabio Estevam
• [PATCH 1/3] ARM: mx5/mx53_loco: Add write-protect and card-detect for SD3   Fabio Estevam
• [PATCH] ARM: mx5/mx53_loco: Fix build warning related to gpio_keys_button structure   Fabio Estevam
• [PATCH 1/3] ARM: mx5/mx53_loco: Add write-protect and card-detect for SD3   Fabio Estevam
• [PATCH v2] ARM: mx5/mx53_smd: Add esdhc support   Fabio Estevam
• [PATCH v3] ARM: mx5/mx53_smd: Add esdhc support   Fabio Estevam
• [PATCH] ARM: mx3/pcm043: Remove unneeded esdhc.h define   Fabio Estevam
• [PATCH v2 1/2] ARM: mxc: Introduce imx_add_gpio_leds   Fabio Estevam
• [PATCH v2 2/2] ARM: mx5/mx53_evk.c: Add LED support   Fabio Estevam
• [PATCH v2] ARM: mx5/mx53_smd: Add esdhc support   Fabio Estevam
• [PATCH v3] ARM: mx5/mx53_evk.c: Add LED support   Fabio Estevam
• [PATCH] leds: provide helper to register "leds-gpio" devices   Fabio Estevam
• [PATCH] leds: provide helper to register "leds-gpio" devices   Fabio Estevam
• [PATCH v2] leds: provide helper to register "leds-gpio" devices   Fabio Estevam
• [PATCH v3] ARM: mx5/mx53_evk.c: Add LED support   Fabio Estevam
• [PATCH] ARM: mx51: Remove imx51_add_gpio_keys   Fabio Estevam
• [PATCH] video: imx-fb: just depend on IMX_HAVE_PLATFORM_IMX_FB   Fabio Estevam
• [PATCH] ARM: Do not use__init annotations to declarations   Fabio Estevam
• [PATCH 4/9] ARM i.MX51 babbage: Add framebuffer support   Fabio Estevam
• [PATCH 5/9] ARM i.MX53 loco: Add framebuffer support   Fabio Estevam
• [PATCH v4] [ARM] MX1: Add ARMadeus Systems APF9328 board support   Fabio Estevam
• [PATCH 1/2] ARM: mx5/mx51_babbage: Move GPIO initialization for USB PHY Reset line to commom place   Fabio Estevam
• [PATCH 2/2] ARM: mx5/mx51_babbage: Use gpio_request_one when possible   Fabio Estevam
• [PATCH 2/2] ARM: mx5/mx51_babbage: Use gpio_request_one when possible   Fabio Estevam
• [PATCH v2 1/3] ARM: mx5/mx51_babbage: Move GPIO initialization for USB PHY Reset line to common place   Fabio Estevam
• [PATCH v2 2/3] ARM: mx5/mx51_babbage: Use gpio_request_one when possible   Fabio Estevam
• [PATCH v2 3/3] ARM: mx5/mx51_babbage: Fix the msleep placement   Fabio Estevam
• [PATCH 3/3] MTD/atmel_nand: Fix support for CPUs that do not support DMA access   Nicolas Ferre
• [PATCH 1/3 v2] MTD: atmel_nand: modify test case for using DMA operations   Nicolas Ferre
• [PATCH 1/5] dmaengine: at_hdmac: modify way to use interrupts   Nicolas Ferre
• [PATCH 2/5] dmaengine: at_hdmac: add cyclic DMA operation support   Nicolas Ferre
• [PATCH 3/5] dmaengine: at_hdmac: debug information sg_len for prep_slave_sg   Nicolas Ferre
• [PATCH 4/5] dmaengine: at_hdmac: remove channel status testing in tasklet   Nicolas Ferre
• [PATCH 5/5] dmaengine: at_hdmac: specialize AHB interfaces to optimize transfers   Nicolas Ferre
• [GIT PULL] omap changes for v2.6.39 merge window   Nicolas Ferre
• [PATCH 2/5] dmaengine: at_hdmac: add cyclic DMA operation support   Nicolas Ferre
• [PATCH 2/5] dmaengine: at_hdmac: add cyclic DMA operation support   Nicolas Ferre
• Status of arch/arm in linux-next   Nicolas Ferre
• [RFC PATCH] Consolidate SRAM support   Nicolas Ferre
• [PATCH] mach-at91: gsia18s board improvements and bug fixes   Nicolas Ferre
• [PATCH v2 1/5] dmaengine: at_hdmac: modify way to use interrupts   Nicolas Ferre
• [PATCH v2 2/5] dmaengine: at_hdmac: add cyclic DMA operation support   Nicolas Ferre
• [PATCH v2 3/5] dmaengine: at_hdmac: debug information sg_len for prep_slave_sg   Nicolas Ferre
• [PATCH v2 4/5] dmaengine: at_hdmac: remove channel status testing in tasklet   Nicolas Ferre
• [PATCH v2 5/5] dmaengine: at_hdmac: specialize AHB interfaces to optimize transfers   Nicolas Ferre
• [PATCH] arm: omap: introduce OMAP MCOP board file   Fillinger, Michael
• [RFC][PATCH V4] axi: add AXI bus driver   Larry Finger
• [PATCH] Enhanced ethtool API of CPSW driver in order to be able to address even more than one PHY.   Sven Fischer
• [PATCH v2 00/12] mmc: use nonblock mmc requests to minimize latency   Per Forlin
• [PATCH v2 01/12] mmc: add none blocking mmc request function   Per Forlin
• [PATCH v2 02/12] mmc: mmc_test: add debugfs file to list all tests   Per Forlin
• [PATCH v2 03/12] mmc: mmc_test: add test for none blocking transfers   Per Forlin
• [PATCH v2 04/12] mmc: add member in mmc queue struct to hold request data   Per Forlin
• [PATCH v2 05/12] mmc: add a block request prepare function   Per Forlin
• [PATCH v2 06/12] mmc: move error code in mmc_block_issue_rw_rq to a separate function.   Per Forlin
• [PATCH v2 07/12] mmc: add a second mmc queue request member   Per Forlin
• [PATCH v2 08/12] mmc: add handling for two parallel block requests in issue_rw_rq   Per Forlin
• [PATCH v2 09/12] mmc: test: add random fault injection in core.c   Per Forlin
• [PATCH v2 10/12] omap_hsmmc: use original sg_len for dma_unmap_sg   Per Forlin
• [PATCH v2 11/12] omap_hsmmc: add support for pre_req and post_req   Per Forlin
• [PATCH v2 12/12] mmci: implement pre_req() and post_req()   Per Forlin
• [PATCH v2 00/12] mmc: use nonblock mmc requests to minimize latency   Per Forlin
• [PATCH v2 00/12] mmc: use nonblock mmc requests to minimize latency   Per Forlin
• [PATCH v2 01/12] mmc: add none blocking mmc request function   Per Forlin
• [PATCH v2 03/12] mmc: mmc_test: add test for none blocking transfers   Per Forlin
• [PATCH v2 03/12] mmc: mmc_test: add test for none blocking transfers   Per Forlin
• [PATCH] mmc: mxs-mmc: add support for pre_req and post_req   Per Forlin
• [PATCH] mmc: mxs-mmc: add support for pre_req and post_req   Per Forlin
• [PATCH v2 00/12] mmc: use nonblock mmc requests to minimize latency   Per Forlin
• [PATCH v2 08/12] mmc: add handling for two parallel block requests in issue_rw_rq   Per Forlin
• [PATCH] mmc: mxs-mmc: add support for pre_req and post_req   Per Forlin
• [PATCH] mmc: mxs-mmc: add support for pre_req and post_req   Per Forlin
• [PATCH] mmc: mxs-mmc: add support for pre_req and post_req   Per Forlin
• [PATCH] mmc: mxs-mmc: add support for pre_req and post_req   Per Forlin
• [PATCH] mmc: mxs-mmc: add support for pre_req and post_req   Per Forlin
• [PATCH] mmc: mxs-mmc: add support for pre_req and post_req   Per Forlin
• [PATCH] mmc: sdhci: add support for pre_req and post_req   Per Forlin
• since when does ARM map the kernel memory in sections?   Per Forlin
• [PATCH v2 01/12] mmc: add none blocking mmc request function   Per Forlin
• [PATCH] mmc: mxs-mmc: add support for pre_req and post_req   Per Forlin
• [PATCH] Fix for missed MII interrupts and MDIO timeouts when FEC is in STOP   Matteo Fortini
• [PATCH] Fix for missed MII interrupts and MDIO timeouts when FEC is in STOP   Matteo Fortini
• External serial 8250/16550   Paulo Fragoso
• [PATCHv2 2.6.40 0/3] ARM: simpad: Add support for GPIO attached hardware   Jochen Friedrich
• [PATCHv2 2.6.40 1/3] ARM:simpad: Add ucb1x00 GPIO definitions and register GPIO   Jochen Friedrich
• [PATCHv2 2.6.40 2/3] ARM:simpad: Cleanup CS3 accessors.   Jochen Friedrich
• [PATCHv2 2.6.40 3/3] ARM:simpad: add GPIO based device definitions.   Jochen Friedrich
• [PATCHv2 2.6.40 2/3] ARM:simpad: Cleanup CS3 accessors.   Jochen Friedrich
• [PATCHv2 2.6.40 2/3] ARM:simpad: Cleanup CS3 accessors.   Jochen Friedrich
• [PATCHv2 2.6.40 3/3] ARM:simpad: add GPIO based device definitions.   Jochen Friedrich
• [PATCHv3 2.6.40 0/4] ARM: simpad: Add support for GPIO attached hardware   Jochen Friedrich
• [PATCHv3 2.6.40 1/4] ARM: simpad: Add ucb1x00 GPIO definitions and register GPIO   Jochen Friedrich
• [PATCHv3 2.6.40 2/4] ARM: simpad: Cleanup CS3 accessors.   Jochen Friedrich
• [PATCHv3 2.6.40 3/4] ARM: simpad: add GPIO based device definitions.   Jochen Friedrich
• [PATCHv3 2.6.40 4/4] ARM: simpad: replace ARM specific LED code   Jochen Friedrich
• [RFC] ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus.   Jochen Friedrich
• [RFC] ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus.   Jochen Friedrich
• [PATCHv3 2.6.40 2/4] ARM: simpad: Cleanup CS3 accessors.   Jochen Friedrich
• [PATCHv4 2.6.40 0/4] ARM: simpad: Add support for GPIO attached hardware   Jochen Friedrich
• [PATCHv4 2.6.40 1/4] ARM:simpad: Add ucb1x00 GPIO definitions and register GPIO   Jochen Friedrich
• [PATCHv4 2.6.40 2/4] ARM:simpad: Cleanup CS3 accessors.   Jochen Friedrich
• [PATCHv4 2.6.40 3/4] ARM:simpad: add GPIO based device definitions.   Jochen Friedrich
• [PATCHv4 2.6.40 4/4] ARM: simpad: replace ARM specific LED code   Jochen Friedrich
• [PATCH] pxa2xx_spi: Fix race condition in stop_queue()   Mike Frysinger
• [PATCH] pxa2xx_spi: Fix race condition in stop_queue()   Mike Frysinger
• [PATCH] spi: Fix race condition in stop_queue()   Mike Frysinger
• [PATCH 9/14] PM / Blackfin: Use struct syscore_ops instead of sysdevs for PM   Mike Frysinger
• [PATCH] mmci: sync DATAEND irq with dma transfer done   Martin Furmanski
• [PATCH v4 0/4] OMAP: DMA: mstandby mode and runtime pm support   G, Manjunath Kondaiah
• [PATCH] at91sam9263: merge all boards defconfig into only one   Guillaume Gardet
• [PATCH 0/6] i2c-davinci gpio pulsed SCL recovery with ICPFUNC   Ben Gardiner
• [PATCH 1/6] i2c-davinci: register dump before attempted bus recovery   Ben Gardiner
• [PATCH 2/6] i2c-davinci: convert davinci_i2c_platform_data to kerneldoc   Ben Gardiner
• [PATCH 3/6] i2c-davinci: introduce a dev-> function pointer for scl pulsing   Ben Gardiner
• [PATCH 4/6] i2c-davinci: use the DA8xx's ICPFUNC to toggle I2C as gpio   Ben Gardiner
• [PATCH 5/6] i2c-davinci: if device has pfunc register, dump that group also   Ben Gardiner
• [PATCH 6/6] da8xx: enable the use of the ICPFUNC in i2c-davinci   Ben Gardiner
• [PATCH 6/6] da8xx: enable the use of the ICPFUNC in i2c-davinci   Ben Gardiner
• [PATCH 6/6] da8xx: enable the use of the ICPFUNC in i2c-davinci   Ben Gardiner
• [PATCH 0/6] i2c-davinci gpio pulsed SCL recovery with ICPFUNC   Ben Gardiner
• [PATCH 0/6] i2c-davinci gpio pulsed SCL recovery with ICPFUNC   Ben Gardiner
• [PATCH v3 1/7] mfd: add pruss mfd driver.   Subhasish Ghosh
• [PATCH v4 08/11] tty: add pruss SUART driver   Subhasish Ghosh
• [PATCH v4 00/11] pruss mfd drivers.   Subhasish Ghosh
• [PATCH v4 01/11] mfd: add pruss mfd driver.   Subhasish Ghosh
• [PATCH v4 02/11] da850: add pruss clock.   Subhasish Ghosh
• [PATCH v4 03/11] da850: pruss platform specific additions.   Subhasish Ghosh
• [PATCH v4 04/11] da850: pruss board specific additions.   Subhasish Ghosh
• [PATCH v4 05/11] mfd: pruss SUART private data.   Subhasish Ghosh
• [PATCH v4 06/11] da850: pruss SUART board specific additions.   Subhasish Ghosh
• [PATCH v4 07/11] da850: pruss SUART platform specific additions.   Subhasish Ghosh
• [PATCH v4 09/11] mfd: pruss CAN private data.   Subhasish Ghosh
• [PATCH v4 10/11] da850: pruss CAN platform specific additions.   Subhasish Ghosh
• [PATCH v4 11/11] da850: pruss CAN board specific additions.   Subhasish Ghosh
• [PATCH v4 0/1] pruss CAN driver.   Subhasish Ghosh
• [PATCH v4 1/1] can: add pruss CAN driver.   Subhasish Ghosh
• [PATCH v4 08/11] tty: add pruss SUART driver   Subhasish Ghosh
• [PATCH v4 01/11] mfd: add pruss mfd driver.   Subhasish Ghosh
• [PATCH v4 03/11] da850: pruss platform specific additions.   Subhasish Ghosh
• [PATCH v4 11/11] da850: pruss CAN board specific additions.   Subhasish Ghosh
• [PATCH v4 03/11] da850: pruss platform specific additions.   Subhasish Ghosh
• [PATCH v4 1/1] can: add pruss CAN driver.   Subhasish Ghosh
• [PATCH v4 08/11] tty: add pruss SUART driver   Subhasish Ghosh
• [PATCH v4 01/11] mfd: add pruss mfd driver.   Subhasish Ghosh
• [PATCH v4 01/11] mfd: add pruss mfd driver.   Subhasish Ghosh
• [PATCH v4 01/11] mfd: add pruss mfd driver.   Subhasish Ghosh
• [PATCH v4 01/11] mfd: add pruss mfd driver.   Subhasish Ghosh
• [Libhugetlbfs-devel] Query about __unmap_hugepage_range   David Gibson
• [alsa-devel] [PATCH] ARM: s3c2440: gta02; Register dfbmcs320 device   Liam Girdwood
• [PATCH] ARM: BUG() dies silently   Simon Glass
• [PATCH] ARM: BUG() dies silently   Simon Glass
• [PATCH] ARM: BUG() dies silently   Simon Glass
• [PATCH] ARM: BUG() dies silently   Simon Glass
• [PATCH v3] ARM: Use generic BUG() handler   Simon Glass
• [PATCH v3] ARM: Use generic BUG() handler   Simon Glass
• [PATCH v4] ARM: Use generic BUG() handler   Simon Glass
• [PATCH v3] ARM: Use generic BUG() handler   Simon Glass
• [PATCH v4] ARM: Use generic BUG() handler   Simon Glass
• [PATCH] arm: plat-mxc: Add missing lockdep annotation   Thomas Gleixner
• [RFC PATCH] genirq: implement read_irq_line for interrupt lines   Thomas Gleixner
• [RFC PATCH] genirq: implement read_irq_line for interrupt lines   Thomas Gleixner
• [RFC patch 00/20] Interrupt chip consolidation   Thomas Gleixner
• genirq: Implement a generic interrupt chip   Thomas Gleixner
• genirq: Add chip suspend and resume callbacks   Thomas Gleixner
• arm: vic: Use generic interrupt chip   Thomas Gleixner
• arm: vic: Implement irq_suspend/resume callbacks   Thomas Gleixner
• arm: orion: Use generic irq chip   Thomas Gleixner
• arm: bcmring: Use generic irq chip implementation   Thomas Gleixner
• arm: davinci: Use generic irq chip   Thomas Gleixner
• arm: samsung: Convert irq-vic-timer to generic irq chip   Thomas Gleixner
• arm: samsung: Convert irq_uart to generic irq chip   Thomas Gleixner
• arm: samsung: s5p: Convert irq-gpioint to generic irq chip   Thomas Gleixner
• arm: tcc8k: Convert to generic irq chip   Thomas Gleixner
• arm: sa1111: Convert to generic irq chip   Thomas Gleixner
• arm: msm: Convert sirc to generic irq chip   Thomas Gleixner
• arm: msm: Convert irq.c chip to generic irq chip   Thomas Gleixner
• arm: msm: Convert irq-vic to generic irq chip   Thomas Gleixner
• arm: msm: Cleanup the irq.c code some more   Thomas Gleixner
• arm: msm: Use irq-vic for all vic instances   Thomas Gleixner
• arm: msm: Consolidate more   Thomas Gleixner
• arm: pxa: Convert SC and GPIO-l to generic irq chips   Thomas Gleixner
• genirq: Implement a generic interrupt chip   Thomas Gleixner
• genirq: Implement a generic interrupt chip   Thomas Gleixner
• Status of arch/arm in linux-next   Thomas Gleixner
• [RFC patch 00/20] Interrupt chip consolidation   Thomas Gleixner
• [RFC patch 00/20] Interrupt chip consolidation   Thomas Gleixner
• [PATCH 04/10] clk: implement parent pass through functions   Thomas Gleixner
• [PATCH 04/10] clk: implement parent pass through functions   Thomas Gleixner
• arm: orion: Use generic irq chip   Thomas Gleixner
• genirq: Implement a generic interrupt chip   Thomas Gleixner
• [PATCH RFC] clk: add support for automatic parent handling   Thomas Gleixner
• [PATCH 0/2] Common struct clk implementation, v14   Thomas Gleixner
• [PATCH RFC] clk: add support for automatic parent handling   Thomas Gleixner
• Away for Easter   Thomas Gleixner
• [PATCH RFC] clk: add support for automatic parent handling   Thomas Gleixner
• [PATCH RFC] clk: add support for automatic parent handling   Thomas Gleixner
• [PATCH RFC] clk: add support for automatic parent handling   Thomas Gleixner
• [PATCH RFC] clk: add support for automatic parent handling   Thomas Gleixner
• [PATCH RFC] clk: add support for automatic parent handling   Thomas Gleixner
• [PATCH RFC] clk: add support for automatic parent handling   Thomas Gleixner
• [PATCH RFC] clk: add support for automatic parent handling   Thomas Gleixner
• arm: msm: Convert irq-vic to generic irq chip   Thomas Gleixner
• [PATCH 01/10] Add a common struct clk   Thomas Gleixner
• [PATCH RFC] clk: add support for automatic parent handling   Thomas Gleixner
• [PATCH RFC] clk: add support for automatic parent handling   Thomas Gleixner
• [PATCH 01/10] Add a common struct clk   Thomas Gleixner
• [PATCH 01/10] Add a common struct clk   Thomas Gleixner
• [PATCH RFC] clk: add support for automatic parent handling   Thomas Gleixner
• [PATCH RFC] clk: add support for automatic parent handling   Thomas Gleixner
• [PATCH RFC] clk: add support for automatic parent handling   Thomas Gleixner
• Common clock and dvfs   Thomas Gleixner
• [PATCH RFC] clk: add support for automatic parent handling   Thomas Gleixner
• Common clock and dvfs   Thomas Gleixner
• [PATCH 01/10] Add a common struct clk   Thomas Gleixner
• genirq: Generic irq chip available in git   Thomas Gleixner
• [patch 00/16] arm: Replace arm sched_clock by clocksource based sched_clock   Thomas Gleixner
• [patch 01/16] time: Provide clocksource based sched_clock()   Thomas Gleixner
• [patch 02/16] arm: plat-orion: Use clocksource based sched_clock   Thomas Gleixner
• [patch 03/16] arm: s5p: Use clocksource based sched_clock   Thomas Gleixner
• [patch 04/16] arm: davinci: Use clocksource based sched_clock   Thomas Gleixner
• [patch 05/16] arm: ixp4xx: Use clocksource based sched_clock   Thomas Gleixner
• [patch 06/16] arm: mmp: Use clocksource based sched_clock   Thomas Gleixner
• [patch 07/16] arm: omap: Use clocksource based sched_clock   Thomas Gleixner
• [patch 08/16] arm: pxa: Use clocksource based sched_clock   Thomas Gleixner
• [patch 09/16] arm: sa1100: Use clocksource based sched_clock   Thomas Gleixner
• [patch 10/16] arm: tegra: Use clocksource based sched_clock   Thomas Gleixner
• [patch 11/16] arm: u300: Use clocksource based sched_clock   Thomas Gleixner
• [patch 12/16] arm: plat-iop: Use clocksource based sched_clock   Thomas Gleixner
• [patch 13/16] arm plat-mxc: Use clocksource based sched_clock   Thomas Gleixner
• [patch 14/16] arm: nomadik: Use clocksource based sched_clock   Thomas Gleixner
• [patch 15/16] arm: versatile: Use clocksource based sched_clock   Thomas Gleixner
• [patch 16/16] arm: Remove sched_clock code   Thomas Gleixner
• [patch 01/16] time: Provide clocksource based sched_clock()   Thomas Gleixner
• [patch 03/16] arm: s5p: Use clocksource based sched_clock   Thomas Gleixner
• [patch 00/16] arm: Replace arm sched_clock by clocksource based sched_clock   Thomas Gleixner
• Architecture specific implementations for tickless kernel and deferrable timers   Thomas Gleixner
• AT91: Convert to fasteoi IRQ handler, and remove ARM irq_finish   Thomas Gleixner
• [patch 00/16] arm: Replace arm sched_clock by clocksource based sched_clock   Thomas Gleixner
• [PATCH 01/10] Add a common struct clk   Thomas Gleixner
• [PATCH RFC] clk: add support for automatic parent handling   Thomas Gleixner
• [PATCH RFC] clk: add support for automatic parent handling   Thomas Gleixner
• [PATCH RFC] clk: add support for automatic parent handling   Thomas Gleixner
• [PATCH RFC] clk: add support for automatic parent handling   Thomas Gleixner
• [PATCH RFC] clk: add support for automatic parent handling   Thomas Gleixner
• [patch 07/16] arm: omap: Use clocksource based sched_clock   Thomas Gleixner
• [patch 07/16] arm: omap: Use clocksource based sched_clock   Thomas Gleixner
• [PATCH RFC] clk: add support for automatic parent handling   Thomas Gleixner
• [PATCH RFC] clk: add support for automatic parent handling   Thomas Gleixner
• [patch 00/16] arm: Replace arm sched_clock by clocksource based sched_clock   Thomas Gleixner
• Architecture specific implementations for tickless kernel and deferrable timers   Thomas Gleixner
• Architecture specific implementations for tickless kernel and deferrable timers   Thomas Gleixner
• [patch 00/16] arm: Replace arm sched_clock by clocksource based sched_clock   Thomas Gleixner
• [PATCH RFC] clk: add support for automatic parent handling   Thomas Gleixner
• [PATCH RFC] clk: add support for automatic parent handling   Thomas Gleixner
• [PATCH 6/6] ARM: gic: use handle_fasteoi_irq for SPIs   Thomas Gleixner
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Jerome Glisse
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Jerome Glisse
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Jerome Glisse
• [PATCH v3] [ARM] MX1: Add ARMadeus Systems APF9328 board support   Gwenhael Goavec-Merou
• [PATCH v4] [ARM] MX1: Add ARMadeus Systems APF9328 board support   Gwenhael Goavec-Merou
• [PATCH v5] [ARM] MX1: Add ARMadeus Systems APF9328 board support   Gwenhael Goavec-Merou
• [PATCH v6] [ARM] MX1: Add ARMadeus Systems APF9328 board support   Gwenhael Goavec-Merou
• [RFC][PATCH V4] axi: add AXI bus driver   Jonas Gorski
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Jonas Gorski
• [PATCH] drivers: brcmaxi: provide amba axi functionality in separate module   Jonas Gorski
• [PATCH v2 00/12] OMAP2+: Serial: Runtime adaptation + cleanup   Govindraj.R
• [PATCH v2 01/12] OMAP2+: UART: Remove certain uart calls from sram_idle   Govindraj.R
• [PATCH v2 02/12] OMAP2+: UART: Remove uart clock handling code from serial.c   Govindraj.R
• [PATCH v2 03/12] OMAP2+: Serial: Add default mux for all uarts.   Govindraj.R
• [PATCH v2 04/12] Serial: OMAP: Add runtime pm support for omap-serial driver   Govindraj.R
• [PATCH v2 05/12] OMAP: Serial: Hold console lock for console usage.   Govindraj.R
• [PATCH v2 06/12] Serial: OMAP2+: Move erratum handling from serial.c   Govindraj.R
• [PATCH v2 07/12] OMAP: Serial: Allow UART parameters to be configured from board file   Govindraj.R
• [PATCH v2 08/12] Serial: OMAP2+: Make the RX_TIMEOUT for DMA configurable for each UART   Govindraj.R
• [PATCH v2 09/12] OMAP3: Serial: Remove uart pads from 3430 board file.   Govindraj.R
• [PATCH v2 10/12] OMAP2+: hwmod: Add api to enable io_ring wakeup.   Govindraj.R
• [PATCH v2 11/12] OMAP: Serial: Use resume call from prcm to enable uart   Govindraj.R
• [PATCH v2 12/12] OMAP2: Serial: Add no async wake flag.   Govindraj.R
• [PATCH v4 1/1] can: add pruss CAN driver.   Wolfgang Grandegger
• [PATCH v4 1/1] can: add pruss CAN driver.   Wolfgang Grandegger
• [PATCH v4 1/1] can: add pruss CAN driver.   Wolfgang Grandegger
• [PATCH 4/9] ARM: pxa: use gpio reset   Igor Grinberg
• [PATCH] fix build warnings on defconfigs   Igor Grinberg
• [PATCH] pxa270 rtc wakeup event fix   Igor Grinberg
• [PATCH 1/2] arm: omap: fix bug with multiple smsc911x devices   Igor Grinberg
• [PATCH 2/2] arm: omap: gpmc-smsc911x: minor style fixes   Igor Grinberg
• [PATCH v2 1/2] arm: omap: fix bug with multiple smsc911x devices   Igor Grinberg
• [PATCH 2/2] arm: omap: gpmc-smsc911x: minor style fixes   Igor Grinberg
• [PATCH 2/2] arm: omap: gpmc-smsc911x: minor style fixes   Igor Grinberg
• [PATCH v2 2/2] arm: omap: gpmc-smsc911x: minor style fixes   Igor Grinberg
• [PATCH] arm: omap3: cm-t3517: fix section mismatch warning   Igor Grinberg
• [PATCH] arm: omap2plus: GPIO cleanup mach-omap2/*   Igor Grinberg
• [PATCH] PXA: Fix typo in proc-xscale.S   Igor Grinberg
• [PATCH] arm: omap2plus: GPIO cleanup mach-omap2/*   Igor Grinberg
• [PATCH] PXA: Fix typo in proc-xscale.S   Igor Grinberg
• [PATCH 1/2] TI816X: Add minimal hwmod data   Grosen, Mark
• [PATCH 2/2 v2] OMAP2/3: hwmod: fix gpio-reset timeouts seen during bootup.   Gulati, Shweta
• [PATCH] OMAP2+: SR Layer Cleanup.   Gulati, Shweta
• [PATCH V2] OMAP2+: SR Layer Cleanup.   Shweta Gulati
• [PATCH] OMAP: Added recalculation of clock rate in 'clk_set_rate'   Shweta Gulati
• [PATCH] OMAP: Added recalculation of clock rate in 'clk_set_rate'   Gulati, Shweta
• [PATCH] OMAP: Added recalculation of clock rate in 'clk_set_rate'   Gulati, Shweta
• [PATCH] OMAP: Added recalculation of clock rate in 'clk_set_rate'   Gulati, Shweta
• [PATCH 1/1] net/fec: do not pass NULL dev to DMA API   Shawn Guo
• [PATCH] arm/dt: Add a make rule to build dtb for enabled platform   Shawn Guo
• [PATCH] arm/dt: Add a make rule to build dtb for enabled platform   Shawn Guo
• [PATCH] ARM: mxs/clock-mx28: fix up name##_set_rate   Shawn Guo
• [PATCH v2] arm/dt: Add a make rule to build dtb for enabled boards   Shawn Guo
• [PATCH 3/3] video: mxsfb: add DOTCLK polarity configuration support   Shawn Guo
• [PATCH 3/3] video: mxsfb: add DOTCLK polarity configuration support   Shawn Guo
• [PATCH] video: mxsfb: correct typo 'FAILING' to 'FALLING'   Shawn Guo
• [PATCH v2] arm/dt: Add a make rule to build dtb for enabled boards   Shawn Guo
• [PATCH 1/6] ARM: mxc: update defconfigs   Shawn Guo
• [PATCH 1/6] ARM: mxc: update defconfigs   Shawn Guo
• [PATCH v5 1/4] ARM: add GPMI support for imx23/imx28   Shawn Guo
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Shawn Guo
• [PATCH v5 1/4] ARM: add GPMI support for imx23/imx28   Shawn Guo
• [PATCH v2 00/12] mmc: use nonblock mmc requests to minimize latency   Shawn Guo
• [PATCH] mmc: sdhci: add support for pre_req and post_req   Shawn Guo
• [PATCH v2 03/12] mmc: mmc_test: add test for none blocking transfers   Shawn Guo
• [PATCH] mmc: mxs-mmc: add support for pre_req and post_req   Shawn Guo
• [PATCH] mmc: mxs-mmc: add support for pre_req and post_req   Shawn Guo
• [RFC] sanitizing crazy clock data files   Shawn Guo
• [RFC 0/4] convert stmp into mxs and delete the obsolete platform   Shawn Guo
• [PATCHv3] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Shawn Guo
• [PATCHv3] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Shawn Guo
• [PATCH] mmc: mxs-mmc: add support for pre_req and post_req   Shawn Guo
• [PATCH] ARM: Include Makefile.boot only when it exists   Shawn Guo
• [PATCH 3/3] ARM: zImage: fix issues with missing GOT entries for some global variables   Shawn Guo
• [PATCH] ARM: Include Makefile.boot only when it exists   Shawn Guo
• [PATCH V2 2/3] ARM: mxs: add GPMI device for imx23   Shawn Guo
• [PATCH 0/3] fix some issues with the kernel decompressor   Shawn Guo
• [PATCH 3/3] ARM: zImage: fix issues with missing GOT entries for some global variables   Shawn Guo
• [PATCH v2] mmc: mxs-mmc: add support for pre_req and post_req   Shawn Guo
• [PATCH] mmc: mxs-mmc: add support for pre_req and post_req   Shawn Guo
• [PATCH] mmc: mxs-mmc: add support for pre_req and post_req   Shawn Guo
• [PATCH] mmc: mxs-mmc: add support for pre_req and post_req   Shawn Guo
• [PATCH] mmc: mxs-mmc: add support for pre_req and post_req   Shawn Guo
• [PATCH] ARM: Fix relocation if image end past uncompressed kernel end   Shawn Guo
• [PATCH] ARM: Fix relocation if image end past uncompressed kernel end   Shawn Guo
• [PATCH] MXS DMA: add end of list sentinel to platform_id list   Shawn Guo
• [PATCH] MXS DMA: enable CLKGATE before accessing registers   Shawn Guo
• [PATCH] mmc: sdhci: add support for pre_req and post_req   Shawn Guo
• [PATCH] ARM: Include Makefile.boot only when it exists   Shawn Guo
• [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache   Gupta, Ramesh
• [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache   Gupta, Ramesh
• [RFC PATCH V3 0/4] cpuidle: global registration of idle states with per-cpu statistics   Trinabh Gupta
• [RFC PATCH V3 1/4] cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state   Trinabh Gupta
• [RFC PATCH V3 2/4] cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare()   Trinabh Gupta
• [RFC PATCH V3 3/4] Split cpuidle_state structure and move per-cpu statistics fields   Trinabh Gupta
• [RFC PATCH V3 4/4] cpuidle: Single/Global registration of idle states   Trinabh Gupta
• [linux-pm] [RFC PATCH V3 1/4] cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state   Trinabh Gupta
• [linux-pm] [RFC PATCH V3 4/4] cpuidle: Single/Global registration of idle states   Trinabh Gupta
• [linux-pm] [RFC PATCH V3 4/4] cpuidle: Single/Global registration of idle states   Trinabh Gupta
• [RFC PATCH V4 0/4] cpuidle: global registration of idle states with per-cpu statistics   Trinabh Gupta
• [RFC PATCH V4 1/4] cpuidle: Move dev->last_residency update to driver enter routine, remove dev->last_state   Trinabh Gupta
• [RFC PATCH V4 2/4] cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare()   Trinabh Gupta
• [RFC PATCH V4 3/4] cpuidle: Split cpuidle_state structure and move per-cpu statistics fields   Trinabh Gupta
• [RFC PATCH V4 4/4] cpuidle: Single/Global registration of idle states   Trinabh Gupta
• Status of arch/arm in linux-next   Martin Guy
• [PATCH v16 00/13] davinci vpbe: dm6446 v4l2 driver   Manjunath Hadli
• [PATCH v16 01/13] davinci vpbe: V4L2 display driver for DM644X SoC   Manjunath Hadli
• [PATCH v16 02/13] davinci vpbe: VPBE display driver   Manjunath Hadli
• [PATCH v16 03/13] davinci vpbe: OSD(On Screen Display) block   Manjunath Hadli
• [PATCH v16 04/13] davinci vpbe: VENC( Video Encoder) implementation   Manjunath Hadli
• [PATCH v16 05/13] davinci vpbe: Build infrastructure for VPBE driver   Manjunath Hadli
• [PATCH v16 06/13] davinci vpbe: Readme text for Dm6446 vpbe   Manjunath Hadli
• [PATCH v18 07/13] davinci: move DM64XX_VDD3P3V_PWDN to devices.c   Manjunath Hadli
• [PATCH v18 08/13] davinci: eliminate use of IO_ADDRESS() on sysmod   Manjunath Hadli
• [PATCH v18 09/13] davinci: dm644x: Replace register base value with a defined macro   Manjunath Hadli
• [PATCH v18 10/13] davinci: dm644x: change vpfe capture structure variables for consistency   Manjunath Hadli
• [PATCH v18 11/13] davinci: dm644x: move vpfe init from soc to board specific files   Manjunath Hadli
• [PATCH v18 12/13] davinci: dm644x: add support for v4l2 video display   Manjunath Hadli
• [PATCH v18 13/13] davinci: dm644x EVM: add support for VPBE display   Manjunath Hadli
• [PATCH v18 08/13] davinci: eliminate use of IO_ADDRESS() on sysmod   Hadli, Manjunath
• [PATCH v16 01/13] davinci vpbe: V4L2 display driver for DM644X SoC   Hadli, Manjunath
• [PATCH v16 01/13] davinci vpbe: V4L2 display driver for DM644X SoC   Hadli, Manjunath
• [PATCH v16 01/13] davinci vpbe: V4L2 display driver for DM644X SoC   Hadli, Manjunath
• [PATCH v16 01/13] davinci vpbe: V4L2 display driver for DM644X SoC   Hadli, Manjunath
• Cleanup Samsung stuff   MyungJoo Ham
• [linux-pm] [TuxOnIce-devel] [RFC PATCH] Current status, suspend-to-disk support on ARM   MyungJoo Ham
• [PATCH] arm: exynos4: PM Bugfix for not waking up from suspend-to-RAM   MyungJoo Ham
• [RFC PATCH v2 1/3] PM / Core: suspend_again callback for device PM.   MyungJoo Ham
• [RFC PATCH v2 1/3] PM / Core: suspend_again callback for device PM.   MyungJoo Ham
• [PATCH 5/7] v4l: s5p-fimc: add pm_runtime support   Jonghun Han
• [PATCH 04/12] mm: alloc_contig_freed_pages() added   Dave Hansen
• [PATCH] mmci: sync DATAEND irq with dma transfer done   Ulf Hansson
• [PATCH v2 1/1] ARM: imx: add gpu device   Sascha Hauer
• [PATCH v2 1/2] ARM: mxc: Introduce imx_add_gpio_leds   Sascha Hauer
• [PATCH v3] ARM: mx5/mx53_evk.c: Add LED support   Sascha Hauer
• [PATCH V2 2/2] MX53 Enable the AHCI SATA on MX53 LOCO   Sascha Hauer
• [PATCH V2 2/2] MX53 Enable the AHCI SATA on MX53 LOCO   Sascha Hauer
• [PATCH 3/7] Add i.MX5 framebuffer driver   Sascha Hauer
• [PATCH 5/7] ARM i.MX53 loco: Add framebuffer support   Sascha Hauer
• [PATCH 1/7] Add a mfd IPUv3 driver   Sascha Hauer
• [PATCH 5/7] ARM i.MX53 loco: Add framebuffer support   Sascha Hauer
• [PATCH 2/7] ARM i.MX5: Add IPU device support   Sascha Hauer
• [RFC] sanitizing crazy clock data files   Sascha Hauer
• [PATCH 01/10] Add a common struct clk   Sascha Hauer
• [PATCH 02/10] clk: Generic support for fixed-rate clocks   Sascha Hauer
• [PATCH 03/10] clk: Make NULL a valid clock again   Sascha Hauer
• [PATCH 04/10] clk: implement parent pass through functions   Sascha Hauer
• [PATCH 05/10] clk: Add support for simple dividers   Sascha Hauer
• [PATCH 06/10] clk: Add support for a generic clock multiplexer   Sascha Hauer
• [PATCH 07/10] ARM i.MX: Support for clock building blocks.   Sascha Hauer
• [PATCH 08/10] ARM i.MX: Add generic support for pllv2   Sascha Hauer
• [PATCH 09/10] ARM i.MX51/53: reimplement clock support   Sascha Hauer
• [PATCH 10/10] ARM i.MX51/53: remove old clock support   Sascha Hauer
• [RFC] sanitizing crazy clock data files   Sascha Hauer
• [RFC] sanitizing crazy clock data files   Sascha Hauer
• [PATCH 04/10] clk: implement parent pass through functions   Sascha Hauer
• [PATCH 05/10] clk: Add support for simple dividers   Sascha Hauer
• [PATCH 06/10] clk: Add support for a generic clock multiplexer   Sascha Hauer
• [PATCH 03/10] clk: Make NULL a valid clock again   Sascha Hauer
• [PATCH 05/10] clk: Add support for simple dividers   Sascha Hauer
• [PATCH 04/10] clk: implement parent pass through functions   Sascha Hauer
• [PATCH 04/10] clk: implement parent pass through functions   Sascha Hauer
• [PATCH 05/10] clk: Add support for simple dividers   Sascha Hauer
• [GIT PULL] i.MX for -rc   Sascha Hauer
• [PATCH RFC] clk: add support for automatic parent handling   Sascha Hauer
• [PATCH RFC] clk: add support for automatic parent handling   Sascha Hauer
• [RFC PATCH 00/18] OMAP: GPIO: cleanup GPIO driver   Sascha Hauer
• [PATCH 05/10] clk: Add support for simple dividers   Sascha Hauer
• [PATCH 4/9] ARM i.MX51 babbage: Add framebuffer support   Sascha Hauer
• [patch 08/16] arm: pxa: Use clocksource based sched_clock   Sascha Hauer
• [patch 13/16] arm plat-mxc: Use clocksource based sched_clock   Sascha Hauer
• [PATCHv2 2.6.40 2/3] ARM:simpad: Cleanup CS3 accessors.   Henning Heinold
• [PATCH] i2c: QUP based bus driver for Qualcomm MSM chipsets   Kenneth Heitke
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Thomas Hellstrom
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Thomas Hellstrom
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Thomas Hellstrom
• [GIT PULL] omap changes for v2.6.39 merge window   Benjamin Herrenschmidt
• [GIT PULL] omap changes for v2.6.39 merge window   Benjamin Herrenschmidt
• [PATCH 0/2] Common struct clk implementation, v14   Benjamin Herrenschmidt
• [PATCH RFC] clk: add support for automatic parent handling   Benjamin Herrenschmidt
• [PATCH RFC] clk: add support for automatic parent handling   Benjamin Herrenschmidt
• [RFC] ARM DMA mapping TODO, v1   Benjamin Herrenschmidt
• [RFC] ARM DMA mapping TODO, v1   Benjamin Herrenschmidt
• [RFC] ARM DMA mapping TODO, v1   Benjamin Herrenschmidt
• [RFC] ARM DMA mapping TODO, v1   Benjamin Herrenschmidt
• [RFC] ARM DMA mapping TODO, v1   Benjamin Herrenschmidt
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Benjamin Herrenschmidt
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Benjamin Herrenschmidt
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Benjamin Herrenschmidt
• [RFC] ARM DMA mapping TODO, v1   Benjamin Herrenschmidt
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Benjamin Herrenschmidt
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Benjamin Herrenschmidt
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Benjamin Herrenschmidt
• [RFC] ARM DMA mapping TODO, v1   Benjamin Herrenschmidt
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Benjamin Herrenschmidt
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Benjamin Herrenschmidt
• [PATCH] arm/dt: Add a make rule to build dtb for enabled platform   Rob Herring
• [PATCH V7 02/17] SPEAr13xx: Add PCIe host controller base driver support.   Rob Herring
• [RFC PATCH] Consolidate SRAM support   Rob Herring
• [PATCH] clk: don't include mach/clkdev.h for common struct clk   Rob Herring
• [PATCH 00/10] ARM: SMP initialization consolidation   Rob Herring
• Resend [PATCH 00/10] ARM: SMP initialization consolidation   Rob Herring
• [PATCH 01/10] ARM: move Versatile SMP pen code to common location   Rob Herring
• [PATCH 02/10] ARM: ux500: convert to use common secondary pen code   Rob Herring
• [PATCH 03/10] ARM: msm: use common secondary pen code   Rob Herring
• [PATCH 04/10] ARM: add common scu_init_cpus   Rob Herring
• [PATCH 05/10] ARM: omap: use common scu_init_cpus   Rob Herring
• [PATCH 06/10] ARM: realview: use common scu_init_cpus   Rob Herring
• [PATCH 07/10] ARM: vexpress: use common scu_init_cpus   Rob Herring
• [PATCH 08/10] ARM: ux500: use common scu_init_cpus   Rob Herring
• [PATCH 09/10] ARM: shmobile: use common scu_init_cpus   Rob Herring
• [PATCH 10/10] ARM: move set_cpu_present calls to common smp code   Rob Herring
• [GIT PULL] omap changes for v2.6.39 merge window   Kevin Hilman
• [PATCH 1/2 v2] OMAP2/3: hwmod: fix the i2c-reset timeout during bootup   Kevin Hilman
• [GIT PULL] OMAP PM fixes for 2.6.39-rc   Kevin Hilman
• [PATCH] OMAP2+: SR Layer Cleanup.   Kevin Hilman
• [PATCH/RFC 0/6] ARM: runtime PM: consolidate runtime PM implementations   Kevin Hilman
• [PATCH/RFC 1/6] ARM: sh-mobile: runtime PM: convert to device powerdomains   Kevin Hilman
• [PATCH/RFC 2/6] OMAP2+: PM: move runtime PM implementation to use device power domains   Kevin Hilman
• [PATCH/RFC 3/6] OMAP1: runtime PM: drop platform bus implementation   Kevin Hilman
• [PATCH/RFC 4/6] ARM: move SH-mobile runtime PM to arm/common for sharing with other platforms   Kevin Hilman
• [PATCH/RFC 5/6] ARM: use common clock-based runtime PM implementation on SH-mobile & OMAP1   Kevin Hilman
• [PATCH/RFC 6/6] Revert "driver core: platform_bus: allow runtime override of dev_pm_ops"   Kevin Hilman
• [PATCH/RFC 0/6] ARM: runtime PM: consolidate runtime PM implementations   Kevin Hilman
• [PATCH/RFC 4/6] ARM: move SH-mobile runtime PM to arm/common for sharing with other platforms   Kevin Hilman
• [PATCH/RFC 0/6] ARM: runtime PM: consolidate runtime PM implementations   Kevin Hilman
• [PATCH] nohz: delay going tickless under CPU load to favor deeper C states   Kevin Hilman
• [PATCH] nohz: delay going tickless under CPU load to favor deeper C states   Kevin Hilman
• [PATCH/RFC 0/6] ARM: runtime PM: consolidate runtime PM implementations   Kevin Hilman
• [PATCH/RFC 4/6] ARM: move SH-mobile runtime PM to arm/common for sharing with other platforms   Kevin Hilman
• [PATCH 1/2 v2] OMAP2/3: hwmod: fix the i2c-reset timeout during bootup   Kevin Hilman
• [PATCH linux-omap-pm/pm-wip/cpufreq] OMAP2PLUS: cpufreq: Fix typo when attempting to set mpu_clk for OMAP4   Kevin Hilman
• arm: davinci: Use generic irq chip   Kevin Hilman
• [PATCH] davinci: fix DEBUG_LL code for p2v changes   Kevin Hilman
• [linux-pm] [RFC PATCH V3 1/4] cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state   Kevin Hilman
• [linux-pm] [RFC PATCH V3 4/4] cpuidle: Single/Global registration of idle states   Kevin Hilman
• [v2 0/7] OMAP: GPIO: Use PM runtime framework   Kevin Hilman
• [PATCH] OMAP2+: powerdomain: fix typo: lose context --> loose context   Kevin Hilman
• [PATCH 3/7] OMAP4: GPIO: Save/restore context   Kevin Hilman
• [v2 0/7] OMAP: GPIO: Use PM runtime framework   Kevin Hilman
• [PATCH] OMAP2+: powerdomain: fix typo: lose context --> loose context   Kevin Hilman
• [PATCH] OMAP: GPIO: replace get_gpio_index() by using bank width   Kevin Hilman
• [RFC PATCH 03/18] OMAP: GPIO: Move gpio_get_index() to mach-omap   Kevin Hilman
• [RFC PATCH 04/18] OMAP: GPIO: Move gpio_valid() to SoC specific files   Kevin Hilman
• [RFC PATCH 05/18] OMAP: GPIO: cleanup datain, dataout, set dir funcs   Kevin Hilman
• [RFC PATCH 11/18] OMAP: GPIO: Remove dependency on gpio_bank_count   Kevin Hilman
• [RFC PATCH 00/18] OMAP: GPIO: cleanup GPIO driver   Kevin Hilman
• [PATCH 00/15] OMAP: GPIO: clean up: pass register offsets via pdata   Kevin Hilman
• [PATCH 01/15] OMAP: GPIO: _clear_gpio_irqbank: fix flushing of posted write   Kevin Hilman
• [PATCH 02/15] OMAP: GPIO: remove MPUIO handling from _clear_gpio_irqbank()   Kevin Hilman
• [PATCH 03/15] OMAP: GPIO: move bank width into struct gpio_bank   Kevin Hilman
• [PATCH 04/15] OMAP: GPIO: _get_gpio_irqbank_mask: replace hard-coded mask with bank->width   Kevin Hilman
• [PATCH 05/15] OMAP: GPIO: replace get_gpio_index() by using bank width   Kevin Hilman
• [PATCH 06/15] OMAP: GPIO: remove get_gpio_bank()   Kevin Hilman
• [PATCH 07/15] OMAP: GPIO: move register offset defines into gpio.h   Kevin Hilman
• [PATCH 08/15] OMAP: GPIO: consolidate direction, input, output, remove #ifdefs   Kevin Hilman
• [PATCH 09/15] OMAP: GPIO: consolidate IRQ status handling, remove #ifdefs   Kevin Hilman
• [PATCH 10/15] OMAP: GPIO: conslidate enable/disable of GPIO IRQs, remove ifdefs   Kevin Hilman
• [PATCH 11/15] OMAP: GPIO: convert MPUIO IRQ over to generic irq_chip   Kevin Hilman
• [PATCH 12/15] OMAP: GPIO: remove useless gpio_valid() & check_gpio() checks   Kevin Hilman
• [PATCH 13/15] OMAP: GPIO: cleanup _set_gpio_wakeup(), remove ifdefs   Kevin Hilman
• [PATCH 14/15] OMAP: GPIO: debounce remove SoC specific registers, use pdata   Kevin Hilman
• [PATCH 15/15] OMAP: GPIO: cleanup show revision, remove cpu_is checks, display only once   Kevin Hilman
• [linux-pm] [RFC PATCH V3 4/4] cpuidle: Single/Global registration of idle states   Kevin Hilman
• [RFC PATCH] Current status, suspend-to-disk support on ARM   Frank Hofmann
• [RFC PATCH] Current status, suspend-to-disk support on ARM   Frank Hofmann
• [RFC PATCH v2] Current status, suspend-to-disk support on ARM   Frank Hofmann
• [RFC PATCH] ARM: fiq: Refactor {get,set}_fiq_regs() for Thumb-2   Frank Hofmann
• [RFC PATCH] ARM: fiq: Refactor {get,set}_fiq_regs() for Thumb-2   Frank Hofmann
• [RFC PATCH] ARM: fiq: Refactor {get,set}_fiq_regs() for Thumb-2   Frank Hofmann
• [RFC PATCH] Current status, suspend-to-disk support on ARM   Frank Hofmann
• [RFC PATCH] Current status, suspend-to-disk support on ARM   Frank Hofmann
• [RFC PATCH] Current status, suspend-to-disk support on ARM   Frank Hofmann
• [TuxOnIce-devel] [RFC PATCH] Current status, suspend-to-disk support on ARM   Frank Hofmann
• [PATCH] arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC   Alexander Holler
• [PATCH 0/2] ARM: Unify setup for Marvell SheevaPlugs and Seagate DockStars   Alexander Holler
• [PATCH 1/2] ARM: Differentiate SheevaPlugs and DockStars on the basis of the memory size.   Alexander Holler
• [PATCH 2/2] ARM: Remove machine type dockstar (use sheevaplug instead)   Alexander Holler
• [PATCH 2/2] ARM: Remove machine type dockstar (use sheevaplug instead)   Alexander Holler
• [PATCH 1/2] ARM: Differentiate SheevaPlugs and DockStars on the basis of the memory size.   Alexander Holler
• [PATCH 1/2] ARM: Differentiate SheevaPlugs and DockStars on the basis of the memory size.   Alexander Holler
• [PATCH 0/2] ARM: Unify setup for Marvell SheevaPlugs and Seagate DockStars   Alexander Holler
• [PATCH 0/2] ARM: Unify setup for Marvell SheevaPlugs and Seagate DockStars   Alexander Holler
• [PATCH 1/2] ARM: Differentiate SheevaPlugs and DockStars on the basis of the memory size.   Alexander Holler
• [PATCH 1/2] ARM: Differentiate SheevaPlugs and DockStars on the basis of the memory size.   Alexander Holler
• [PATCH 1/2] ARM: Differentiate SheevaPlugs and DockStars on the basis of the memory size.   Alexander Holler
• [PATCH 0/2] ARM: Unify setup for Marvell SheevaPlugs and Seagate DockStars   Alexander Holler
• [PATCH 1/2] ARM: Differentiate SheevaPlugs and DockStars on the basis of the memory size.   Alexander Holler
• [PATCH 1/2] ARM: Differentiate SheevaPlugs and DockStars on the basis of the memory size.   Alexander Holler
• [PATCH 1/2] ARM: Differentiate SheevaPlugs and DockStars on the basis of the memory size.   Alexander Holler
• WARNING: at mm/page_alloc.c   Cyril Hrubis
• WARNING: at mm/page_alloc.c   Cyril Hrubis
• [Zaurus-devel] 2.6.39-rc2 on zaurus: does not build, does not boot   Cyril Hrubis
• reboot/kexec in 2.6.38   Cyril Hrubis
• zaurus: mmcblk0: error -110   Cyril Hrubis
• zaurus: mmcblk0: error -110   Cyril Hrubis
• zaurus: mmcblk0: error -110   Cyril Hrubis
• reboot/kexec in 2.6.38   Cyril Hrubis
• zaurus: mmcblk0: error -110   Cyril Hrubis
• zaurus: mmcblk0: error -110   Cyril Hrubis
• zaurus: mmcblk0: error -110   Cyril Hrubis
• zaurus: mmcblk0: error -110   Cyril Hrubis
• Zaurus CF tests -- ok   Cyril Hrubis
• [TuxOnIce-devel] [RFC PATCH] Current status, suspend-to-disk support on ARM   Matt Hsu
• [TuxOnIce-devel] [RFC PATCH] Current status, suspend-to-disk support on ARM   Matt Hsu
• dma_alloc_writecombine() and MAX_ORDER   Michael Hunold
• accessing vfpinstr macros from outside vfp directory   Bryan Huntsman
• [PATCH] arm: Fix .size directive for xscale_dma_a0_map_area   Ben Hutchings
• [PATCH V14 3/4] ptp: Added a clock driver for the IXP46x.   Ben Hutchings
• [PATCH V14 4/4] ptp: Added a clock driver for the National Semiconductor PHYTER.   Ben Hutchings
• [PATCH] arm: omap2plus: GPIO cleanup mach-omap2/*   Grazvydas Ignotas
• [PATCHv2 0/9] macb: add support for Cadence GEM   Jamie Iles
• [PATCHv2 0/9] macb: add support for Cadence GEM   Jamie Iles
• [PATCH] gemini: fixup irq_data conversion compile breakage   Jamie Iles
• [RFC PATCH 0/5] Convert some ARM platforms to basic-mmio-gpio   Jamie Iles
• [RFC PATCH 1/5] gemini: convert to basic-mmio-gpio   Jamie Iles
• [RFC PATCH 2/5] sa1100: convert to basic-mmio-gpio   Jamie Iles
• [RFC PATCH 3/5] w90x900: convert to basic-mmio-gpio   Jamie Iles
• [RFC PATCH 4/5] iop: convert to basic-mmio-gpio   Jamie Iles
• [RFC PATCH 5/5] mxc: convert to basic-mmio-gpio   Jamie Iles
• [RFC PATCH 0/5] Convert some ARM platforms to basic-mmio-gpio   Jamie Iles
• [RFC PATCH 0/5] Convert some ARM platforms to basic-mmio-gpio   Jamie Iles
• [RFC PATCH 0/5] Convert some ARM platforms to basic-mmio-gpio   Jamie Iles
• [RFC PATCH 0/5] Convert some ARM platforms to basic-mmio-gpio   Jamie Iles
• [RFC PATCH 2/5] sa1100: convert to basic-mmio-gpio   Jamie Iles
• [PATCH 1/3] Framework for exporting System-on-Chip information via sysfs   Jamie Iles
• [RFC PATCH 1/5] gemini: convert to basic-mmio-gpio   Jamie Iles
• [PATCH] Fix infinite loop in ARM user perf_event backtrace code   Jamie Iles
• [PATCHv2 2.6.40 2/3] ARM:simpad: Cleanup CS3 accessors.   Jamie Iles
• [PATCHv2 2.6.40 2/3] ARM:simpad: Cleanup CS3 accessors.   Jamie Iles
• [PATCH V2 7/7] dmaengine/dw_dmac: implement pause and resume in dwc_control   Jamie Iles
• [PATCHv2 2.6.40 2/3] ARM:simpad: Cleanup CS3 accessors.   Jamie Iles
• [PATCH] ARM: perf: remove erroneous check on active_events   Jamie Iles
• [PATCH] OMAP: Added recalculation of clock rate in 'clk_set_rate'   Janorkar, Mayuresh
• [Zaurus-devel] 2.6.39-rc2 on zaurus: does not build, does not boot   Martin Jansa
• [PATCH] pxa/mioa701: use gpio arrays for global and gsm gpio initialization   Robert Jarzmik
• [PATCH] pxa/mioa701: use gpio arrays for global and gsm gpio initialization   Robert Jarzmik
• [PATCH 1/7] Add a mfd IPUv3 driver   Chen Jie-B02280
• [PATCH 5/7] ARM i.MX53 loco: Add framebuffer support   Chen Jie-B02280
• [PATCH] ARCH arm: adding new board: CDU   Prchal Jiří
• [PATCH] Fix infinite loop in ARM user perf_event backtrace code   Olof Johansson
• [PATCH v4] ARM: Use generic BUG() handler   Olof Johansson
• Status of arch/arm in linux-next   Dave Jones
• Status of arch/arm in linux-next   Dave Jones
• Status of arch/arm in linux-next   Dave Jones
• Status of arch/arm in linux-next   Dave Jones
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Lee Jones
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Lee Jones
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Lee Jones
• [PATCH 0/3] Export valuable System-on-Chip information to user-space via sysfs   Lee Jones
• [PATCH 1/3] Framework for exporting System-on-Chip information via sysfs   Lee Jones
• [PATCH 2/3] mach-ux500: export System-on-Chip information via sysfs   Lee Jones
• [PATCH 3/3] Add documenation for new sysfs devices/soc functionallity   Lee Jones
• [PATCH 1/3] Framework for exporting System-on-Chip information via sysfs   Lee Jones
• [PATCH 0/3] Export valuable System-on-Chip information to user-space via sysfs   Lee Jones
• [PATCH 1/3] Framework for exporting System-on-Chip information via sysfs   Lee Jones
• [PATCH 2/3] mach-ux500: export System-on-Chip information via sysfs   Lee Jones
• [PATCH 3/3] Add documenation for new sysfs devices/soc functionallity   Lee Jones
• [PATCH 1/3] Framework for exporting System-on-Chip information via sysfs   Lee Jones
• [PATCH 1/3] Framework for exporting System-on-Chip information via sysfs   Lee Jones
• [PATCH 1/3] Framework for exporting System-on-Chip information via sysfs   Lee Jones
• [RFC 1/6]Fix typo "recieve" in various parts of the kernel.   Jesper Juhl
• [PATCH] ARM: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORS   Jesper Juhl
• [RFC PATCH 06/12] ARM: ux500: use remapped PPI interrupts for local timer   Srinidhi KASAGAR
• [PATCH 00/34] Make kernel build deterministic   Greg KH
• [PATCH 00/34] Make kernel build deterministic   Greg KH
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Greg KH
• [PATCH RESEND 0/4] USB: gadget: Add Samsung S3C24xx USB HS controller driver   Greg KH
• [RFC][WAS:bcmai][PATCH V2] axi: add AXI bus driver   Greg KH
• [RFC][WAS:bcmai][PATCH V2] axi: add AXI bus driver   Greg KH
• [PATCH 1/5] driver core/platform_device_add_data: set platform_data to NULL if !data   Greg KH
• [RFC][PATCH V3] axi: add AXI bus driver   Greg KH
• [RFC][PATCH V3] axi: add AXI bus driver   Greg KH
• [RFC][PATCH V3] axi: add AXI bus driver   Greg KH
• [RFC][PATCH V3] axi: add AXI bus driver   Greg KH
• [RFC][PATCH V3] axi: add AXI bus driver   Greg KH
• [RFC][PATCH V3] axi: add AXI bus driver   Greg KH
• [RFC][PATCH] axi: add AXI bus driver   Greg KH
• [RFC][PATCH V3] axi: add AXI bus driver   Greg KH
• [RFC][PATCH V3] axi: add AXI bus driver   Greg KH
• [RFC][PATCH V4] axi: add AXI bus driver   Greg KH
• [RFC][PATCH V4] axi: add AXI bus driver   Greg KH
• [RFC][PATCH V4] axi: add AXI bus driver   Greg KH
• [PATCH RESEND v3 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver   Greg KH
• [PATCH 3/4] ARM: EXYNOS4: Add usb ehci device to the NURI board   Greg KH
• [PATCH v4 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver   Greg KH
• [PATCH v4 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver   Greg KH
• [PATCH 0/14] Remove sysdev suspend/resume and shutdown operations   Greg KH
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Greg KH
• [PATCH v2] driver core: let dev_set_drvdata return int instead of void as it can fail   Greg KH
• [PATCH v2] driver core: let dev_set_drvdata return int instead of void as it can fail   Greg KH
• [PATCH v2] driver core: let dev_set_drvdata return int instead of void as it can fail   Greg KH
• [PATCH v4 08/11] tty: add pruss SUART driver   Greg KH
• [PATCH v4 08/11] tty: add pruss SUART driver   Greg KH
• [PATCH] clkdev: add support to lookup for early platform device   Greg KH
• [PATCH] arm: nomadik: avoid assigning u32 to bool   Nicolas Kaiser
• [PATCH] arm: nomadik: avoid assigning u32 to bool   Nicolas Kaiser
• [PATCHv5 1/3] ARM: Translate delay.S into (mostly) C   Saravana Kannan
• [PATCH 0/2] Common struct clk implementation, v14   Saravana Kannan
• [PATCH 05/10] clk: Add support for simple dividers   Saravana Kannan
• [PATCH 05/10] clk: Add support for simple dividers   Saravana Kannan
• [PATCH 05/10] clk: Add support for simple dividers   Saravana Kannan
• [PATCH 05/10] clk: Add support for simple dividers   Saravana Kannan
• [PATCH RFC] clk: add support for automatic parent handling   Saravana Kannan
• [PATCH RFC] clk: add support for automatic parent handling   Saravana Kannan
• [PATCH 01/10] Add a common struct clk   Saravana Kannan
• [PATCH RFC] clk: add support for automatic parent handling   Saravana Kannan
• [PATCH RFC] clk: add support for automatic parent handling   Saravana Kannan
• Common clock and dvfs   Saravana Kannan
• Common clock and dvfs   Saravana Kannan
• [PATCH] clkdev: add support to lookup for early platform device   Saravana Kannan
• Getting a lot of zero values from a driver using DMA. D-cache is not updated?   Niclas Karlsson
• [RFC][PATCH] bcmai: introduce AI driver   George Kashperko
• [RFC][PATCH] bcmai: introduce AI driver   George Kashperko
• [RFC][PATCH] bcmai: introduce AI driver   George Kashperko
• [RFC][PATCH] bcmai: introduce AI driver   George Kashperko
• [RFC][PATCH] bcmai: introduce AI driver   George Kashperko
• [RFC][PATCH] bcmai: introduce AI driver   George Kashperko
• [RFC][PATCH] bcmai: introduce AI driver   George Kashperko
• [RFC][PATCH] axi: add AXI bus driver   George Kashperko
• [RFC][PATCH] axi: add AXI bus driver   George Kashperko
• [RFC][PATCH] axi: add AXI bus driver   George Kashperko
• [RFC][PATCH] axi: add AXI bus driver   George Kashperko
• [RFC][PATCH] axi: add AXI bus driver   George Kashperko
• [RFC][PATCH] axi: add AXI bus driver   George Kashperko
• [RFC][PATCH] axi: add AXI bus driver   George Kashperko
• [RFC][PATCH] axi: add AXI bus driver   George Kashperko
• [RFC][PATCH V4] axi: add AXI bus driver   George Kashperko
• [RFC][PATCH V4] axi: add AXI bus driver   George Kashperko
• [RFC][PATCH V4] axi: add AXI bus driver   George Kashperko
• [RFC][PATCH V4] axi: add AXI bus driver   George Kashperko
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   George Kashperko
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   George Kashperko
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   George Kashperko
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   George Kashperko
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   George Kashperko
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   George Kashperko
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   George Kashperko
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   George Kashperko
• [RFC] filter function for submaintainers   Jeremy Kerr
• [PATCH 0/2] Common struct clk implementation, v14   Jeremy Kerr
• [PATCH 0/2] Common struct clk implementation, v14   Jeremy Kerr
• [PATCH 05/10] clk: Add support for simple dividers   Jeremy Kerr
• [PATCH 03/10] clk: Make NULL a valid clock again   Jeremy Kerr
• [PATCH] pxa2xx_spi: Fix race condition in stop_queue()   Vasily Khoruzhick
• [PATCH] pxa2xx_spi: Fix race condition in stop_queue()   Vasily Khoruzhick
• [PATCH] pxa2xx_spi: Fix race condition in stop_queue()   Vasily Khoruzhick
• [PATCH] spi: Fix race condition in stop_queue()   Vasily Khoruzhick
• 2.6.39-rc2 on zaurus: does not build, does not boot   Vasily Khoruzhick
• [PATCH RFC] ARM: PXA27x: CPUFREQ: Don't use fastbus mode   Vasily Khoruzhick
• [PATCH] ARM: add DT support to the S3C SDI driver   Vasily Khoruzhick
• [PATCH] leds: drop leds-h1940 driver   Vasily Khoruzhick
• Clarification regarding DMA in s3c2440.   Vasily Khoruzhick
• [PATCH] Fixed gpio polarity of gpio USB-phy reset.   Juergen Kilb
• [PATCH 2.6.39 v2] V4L: videobuf-dma-contig: fix mmap_mapper broken on ARM   Theodore Kilgore
• [PATCH] ARM: EXYNOS4: Add to support ORIGEN board   JeongHyeon Kim
• [PATCH] ARM: Suspend: Fix build error on ARCH_S5PC100   Kukjin Kim
• [PATCH] ARM: Suspend: Fix build error on ARCH_S5PC100   Kukjin Kim
• [PATCH 1/2] ARM: Make consolidated PM sleep code depend on PM_SLEEP   Kukjin Kim
• [PATCH] ARM: s3c2440: gta02; Register dfbmcs320 device   Kukjin Kim
• [PATCH] ARM: S3C64XX: Initial support for Wolfson/Simtec Cragganmore/Banff   Kukjin Kim
• [GIT PULL] Samsung fixes for 2.6.39-rc4   Kukjin Kim
• [PATCH 8/14] ARM / Samsung: Use struct syscore_ops for "core" power management   Kukjin Kim
• samsung: s5p: Convert irq-gpioint to generic irq chip   Kukjin Kim
• samsung: Convert irq-vic-timer to generic irq chip   Kukjin Kim
• samsung: Convert irq_uart to generic irq chip   Kukjin Kim
• Cleanup Samsung stuff   Kukjin Kim
• Cleanup Samsung stuff   Kukjin Kim
• Cleanup Samsung stuff   Kukjin Kim
• Cleanup Samsung stuff   Kukjin Kim
• Cleanup Samsung stuff   Kukjin Kim
• [patch 03/16] arm: s5p: Use clocksource based sched_clock   Kukjin Kim
• [patch 01/16] time: Provide clocksource based sched_clock()   Kukjin Kim
• [patch 16/16] arm: Remove sched_clock code   Kukjin Kim
• [PATCH] ARM: S3C64XX: Remove gpio-bank-X header files   Kukjin Kim
• [PATCH] ARM: S3C64XX: Remove gpio-bank-X header files   Kukjin Kim
• [PATCH 0/4] ARM: S5P: Replace exynos4 kernel timer with s5p_timer   Sangbeom Kim
• [PATCH 1/4] ARM: S5P: Change s5p_timer for local timer support   Sangbeom Kim
• [PATCH 2/4] ARM: EXYNOS4: Update Kconfig and Makefile for s5p_timer   Sangbeom Kim
• [PATCH 3/4] ARM: EXYNOS4: Change each platform kernel timer using s5p_timer   Sangbeom Kim
• [PATCH 4/4] ARM: EXYNOS4: Delete exynos4 kernel timer   Sangbeom Kim
• [PATCH 0/3] Add WM8580 PCM Machine driver for Samsung SoCs   Sangbeom Kim
• [PATCH 1/3] ARM: S5PV210: Add PCM audio support for WM8580   Sangbeom Kim
• [PATCH 2/3] ARM: S5P64X0: Add PCM audio support for WM8580   Sangbeom Kim
• [alsa-devel][PATCH 3/3] SoC: SAMSUNG: Add WM8580 PCM Machine driver   Sangbeom Kim
• [alsa-devel] [PATCH 3/3] SoC: SAMSUNG: Add WM8580 PCM Machine driver   Sangbeom Kim
• [alsa-devel] [PATCH 3/3] SoC: SAMSUNG: Add WM8580 PCM Machine driver   Sangbeom Kim
• [PATCH] ASoC: SAMSUNG: Add quirk to support Exynos4 PCM audio   Sangbeom Kim
• [PATCH v4 1/1] can: add pruss CAN driver.   Marc Kleine-Budde
• [PATCH v4 01/11] mfd: add pruss mfd driver.   Marc Kleine-Budde
• [PATCH v4 11/11] da850: pruss CAN board specific additions.   Marc Kleine-Budde
• [PATCH v4 01/11] mfd: add pruss mfd driver.   Marc Kleine-Budde
• [PATCH v4 1/1] can: add pruss CAN driver.   Marc Kleine-Budde
• [PATCH v4 01/11] mfd: add pruss mfd driver.   Marc Kleine-Budde
• [GIT PULL] omap changes for v2.6.39 merge window   Uwe Kleine-König
• [PATCH] ARM: mx5/mx53_smd: Add esdhc support   Uwe Kleine-König
• [PATCH] ARM: mx5/mx53_evk: Add LED support   Uwe Kleine-König
• [PATCH] ARM: mx3/pcm043: Remove unneeded esdhc.h define   Uwe Kleine-König
• [PATCH] ARM: mxs/clock-mx28: fix up name##_set_rate   Uwe Kleine-König
• [PATCH v2] ARM: imx: remove #includes already available from devices-common.h   Uwe Kleine-König
• [PATCH] plat-mxc: Provide irq_chip name for GPIO IRQs   Uwe Kleine-König
• [PATCH 1/2] ARM imx53: add pwm devices support   Uwe Kleine-König
• [PATCH 3/3] video: mxsfb: add DOTCLK polarity configuration support   Uwe Kleine-König
• [PATCH 4/6] ARM: mx3/mx31moboard: properly allocate memory for mx3-camera   Uwe Kleine-König
• [PATCH v2] [ARM] MX1: Add ARMadeus Systems APF9328 board support   Uwe Kleine-König
• [PATCH v2] ARM: mx5/mx53_smd: Add esdhc support   Uwe Kleine-König
• [PATCH] ARM: mx53/loco: add pwm backlight device   Uwe Kleine-König
• [PATCH v2 1/2] ARM: mxc: Introduce imx_add_gpio_leds   Uwe Kleine-König
• [PATCH v2 1/2] ARM: mxc: Introduce imx_add_gpio_leds   Uwe Kleine-König
• [PATCH 3/3] video: mxsfb: add DOTCLK polarity configuration support   Uwe Kleine-König
• [PATCH] video: mxsfb: correct typo 'FAILING' to 'FALLING'   Uwe Kleine-König
• [PATCH v2 1/2] ARM: mxc: Introduce imx_add_gpio_leds   Uwe Kleine-König
• [PATCH v2 1/2] ARM: mxc: Introduce imx_add_gpio_leds   Uwe Kleine-König
• [PATCH] ARM: type casts update_sched_clock cyc_to_sched_clock cyc_to_fixed_sched_clock   Uwe Kleine-König
• [PATCH v2 1/2] ARM: mxc: Introduce imx_add_gpio_leds   Uwe Kleine-König
• [PATCH] leds: provide helper to register "leds-gpio" devices   Uwe Kleine-König
• [PATCH v2 1/2] ARM: mxc: Introduce imx_add_gpio_leds   Uwe Kleine-König
• [PATCH] ARM: type casts update_sched_clock cyc_to_sched_clock cyc_to_fixed_sched_clock   Uwe Kleine-König
• [PATCH v2] leds: provide helper to register "leds-gpio" devices   Uwe Kleine-König
• [PATCH] Add Board Support for Siemens L0 Board   Uwe Kleine-König
• [RFC 1/5]arch/arm/common/Makefile Remove unused config in the Makefile.   Uwe Kleine-König
• [PATCH 1/5] driver core/platform_device_add_data: set platform_data to NULL if !data   Uwe Kleine-König
• [PATCH 2/5] driver core/platform_device_add_data: free platform data before overwriting   Uwe Kleine-König
• [PATCH 3/5] driver core/platform_device_add_resources: set resource to NULL if !res   Uwe Kleine-König
• [PATCH 4/5] driver core/platform_device_add_resources: free resource before overwriting   Uwe Kleine-König
• [PATCH 5/5] driver core: let dev_set_drvdata return int instead of void as it can fail   Uwe Kleine-König
• [PATCH 5/5] driver core: let dev_set_drvdata return int instead of void as it can fail   Uwe Kleine-König
• [PATCH v2] leds: provide helper to register "leds-gpio" devices   Uwe Kleine-König
• [PATCH] video: imx-fb: just depend on IMX_HAVE_PLATFORM_IMX_FB   Uwe Kleine-König
• [PATCH] pcmcia/sa1100: put sa11x0_pcmcia_hw_init[] to .devinit.data   Uwe Kleine-König
• [PATCH] ARM: imx51: use platform id 2 for imx51-cspi   Uwe Kleine-König
• [PATCH 1/2] ARM: imx: use imx_add_gpio_keys to register "gpio-keys" devices   Uwe Kleine-König
• [PATCH] video: imx-fb: just depend on IMX_HAVE_PLATFORM_IMX_FB   Uwe Kleine-König
• [PATCH] video: imx-fb: just depend on IMX_HAVE_PLATFORM_IMX_FB   Uwe Kleine-König
• [PATCH] ARM: mx51: Remove imx51_add_gpio_keys   Uwe Kleine-König
• [RFC] filter function for submaintainers   Uwe Kleine-König
• [RFC] filter function for submaintainers   Uwe Kleine-König
• [PATCH] video: imx-fb: just depend on IMX_HAVE_PLATFORM_IMX_FB   Uwe Kleine-König
• [PATCH] V4L: mx3_camera: select VIDEOBUF2_DMA_CONTIG instead of VIDEOBUF_DMA_CONTIG   Uwe Kleine-König
• [PATCH] ARM: Allow for kernel command line concatenation   Uwe Kleine-König
• [PATCH] ARM: Allow for kernel command line concatenation   Uwe Kleine-König
• [PATCH] ARM: Allow for kernel command line concatenation   Uwe Kleine-König
• [RFC 1/6]Fix typo "recieve" in various parts of the kernel.   Uwe Kleine-König
• [PATCH v2] ARM: imx: use imx_add_gpio_keys to register "gpio-keys" devices   Uwe Kleine-König
• [PATCH] ARM: remove support for mxc91231   Uwe Kleine-König
• [PATCH 1/5 V2]arch:common:Makefile Remove unused config in the Makefile.   Uwe Kleine-König
• [PATCH] ARM: imx: fix usb related build failure for mach-vpr200   Uwe Kleine-König
• [FAILED] BLD i.MX51 Referenz + linux-next git kernel   Uwe Kleine-König
• [PATCH] video: imx-fb: just depend on IMX_HAVE_PLATFORM_IMX_FB   Uwe Kleine-König
• [PATCH] fix build warnings on defconfigs   Uwe Kleine-König
• [PATCH 1/6] ARM: mxc: update defconfigs   Uwe Kleine-König
• [PATCH 2/6] ARM: mxc: don't use the symbols in the CPU family choice to select others   Uwe Kleine-König
• [PATCH 3/6] ARM: mxc: simplify platform selection for i.MX21 and i.MX27   Uwe Kleine-König
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Uwe Kleine-König
• [PATCH 5/6] ARM: mx3: make ioremap quirk ready for multi-SoC kernels   Uwe Kleine-König
• [PATCH 6/6] ARM: imx: remove some deprecated and unused #defines   Uwe Kleine-König
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Uwe Kleine-König
• [PATCH V3 1/2] AHCI Add the AHCI SATA feature on MX53 platforms   Uwe Kleine-König
• [PATCH V3 2/2] MX53 Enable the AHCI SATA on MX53 LOCO   Uwe Kleine-König
• [RFC PATCH 0/5] Convert some ARM platforms to basic-mmio-gpio   Uwe Kleine-König
• [RFC PATCH 0/5] Convert some ARM platforms to basic-mmio-gpio   Uwe Kleine-König
• [RFC PATCH 0/5] Convert some ARM platforms to basic-mmio-gpio   Uwe Kleine-König
• [PATCH v2] driver core: let dev_set_drvdata return int instead of void as it can fail   Uwe Kleine-König
• [PATCH 1/5] driver core/platform_device_add_data: set platform_data to NULL if !data   Uwe Kleine-König
• [PATCH v3] leds: provide helper to register "leds-gpio" devices   Uwe Kleine-König
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Uwe Kleine-König
• [PATCH] clkdev: add debugfs support   Uwe Kleine-König
• [PATCH 1/6] ARM: mxc: update defconfigs   Uwe Kleine-König
• [PATCH v2] ARM: mxc: update defconfigs   Uwe Kleine-König
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Uwe Kleine-König
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Uwe Kleine-König
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Uwe Kleine-König
• [PATCH] ARM: remove ns9xxx port   Uwe Kleine-König
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Uwe Kleine-König
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Uwe Kleine-König
• [PATCH v3] leds: provide helper to register "leds-gpio" devices   Uwe Kleine-König
• [PATCH v5 1/4] ARM: add GPMI support for imx23/imx28   Uwe Kleine-König
• [PATCH v5 1/4] ARM: add GPMI support for imx23/imx28   Uwe Kleine-König
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Uwe Kleine-König
• [PATCH v5 1/4] ARM: add GPMI support for imx23/imx28   Uwe Kleine-König
• [PATCH 0/2] Common struct clk implementation, v14   Uwe Kleine-König
• [PATCH 0/2] Common struct clk implementation, v14   Uwe Kleine-König
• [PATCH 1/2] ARM: mxs: add GPMI support for imx23/imx28   Uwe Kleine-König
• [PATCH 2/2] ARM: mxs: add GPMI device for imx23/imx28   Uwe Kleine-König
• [PATCH 1/2] ARM: mxs: add GPMI support for imx23/imx28   Uwe Kleine-König
• [RFC PATCH] Consolidate SRAM support   Uwe Kleine-König
• [RFC PATCH] Consolidate SRAM support   Uwe Kleine-König
• [RFC] sanitizing crazy clock data files   Uwe Kleine-König
• [RFC] sanitizing crazy clock data files   Uwe Kleine-König
• [PATCH] V4L: mx3_camera: select VIDEOBUF2_DMA_CONTIG instead of VIDEOBUF_DMA_CONTIG   Uwe Kleine-König
• [PATCH] V4L: mx3_camera: select VIDEOBUF2_DMA_CONTIG instead of VIDEOBUF_DMA_CONTIG   Uwe Kleine-König
• [RFC 0/4] convert stmp into mxs and delete the obsolete platform   Uwe Kleine-König
• [PATCH 04/10] clk: implement parent pass through functions   Uwe Kleine-König
• [PATCH 05/10] clk: Add support for simple dividers   Uwe Kleine-König
• [PATCH 06/10] clk: Add support for a generic clock multiplexer   Uwe Kleine-König
• [PATCH 06/10] clk: Add support for a generic clock multiplexer   Uwe Kleine-König
• [PATCH 05/10] clk: Add support for simple dividers   Uwe Kleine-König
• [PATCH] ARM: at91: AT91CAP9 has a macb device   Uwe Kleine-König
• [patch 27/29] arm: Cleanup the irq namespace   Uwe Kleine-König
• [PATCH] ARM: at91: AT91CAP9 has a macb device   Uwe Kleine-König
• [PATCH 04/10] clk: implement parent pass through functions   Uwe Kleine-König
• [PATCH 04/10] clk: implement parent pass through functions   Uwe Kleine-König
• [PATCH v2] driver core: let dev_set_drvdata return int instead of void as it can fail   Uwe Kleine-König
• [PATCH v2 1/5] driver core/platform_device_add_data: set platform_data to NULL if !data   Uwe Kleine-König
• [PATCH v2 2/5] driver core/platform_device_add_data: free platform data before overwriting   Uwe Kleine-König
• [PATCH v2 3/5] driver core/platform_device_add_resources: set resource to NULL if !res   Uwe Kleine-König
• [PATCH v2 4/5] driver core/platform_device_add_resources: free resource before overwriting   Uwe Kleine-König
• [PATCH v2 5/5] driver core: let dev_set_drvdata return int instead of void as it can fail   Uwe Kleine-König
• [PATCH] at91: switch to CLKDEV_LOOKUP   Uwe Kleine-König
• [RFC PATCH 02/23] at91: Make Ethernet device common   Uwe Kleine-König
• [PATCH 3/3] ARM: zImage: fix issues with missing GOT entries for some global variables   Uwe Kleine-König
• [PATCH] ARM: Include Makefile.boot only when it exists   Uwe Kleine-König
• [PATCH 3/3] ARM: zImage: fix issues with missing GOT entries for some global variables   Uwe Kleine-König
• [PATCH 03/10] clk: Make NULL a valid clock again   Uwe Kleine-König
• [PATCH RFC] clk: add support for automatic parent handling   Uwe Kleine-König
• [PATCH 0/2] Common struct clk implementation, v14   Uwe Kleine-König
• [PATCH RFC] clk: add support for automatic parent handling   Uwe Kleine-König
• [PATCH v2 16/23] at91: Make LCD controller device common   Uwe Kleine-König
• [PATCH RFC] clk: add support for automatic parent handling   Uwe Kleine-König
• [PATCH 05/10] clk: Add support for simple dividers   Uwe Kleine-König
• [PATCH] omap: Run make savedefconfig on omap2plus_defconfig to shrink it   Uwe Kleine-König
• [PATCH] omap: Run make savedefconfig on omap2plus_defconfig to shrink it   Uwe Kleine-König
• [PATCH] MXS DMA: add end of list sentinel to platform_id list   Uwe Kleine-König
• [PATCH RFC] clk: add support for automatic parent handling   Uwe Kleine-König
• [PATCH v3] [ARM] MX1: Add ARMadeus Systems APF9328 board support   Uwe Kleine-König
• [PATCH v3] leds: provide helper to register "leds-gpio" devices   Uwe Kleine-König
• [PM8921 MFD V5 0/6] pm8921 core and subdevices   Uwe Kleine-König
• [PATCH] ARM: remove ns9xxx port   Uwe Kleine-König
• [PATCH v4] [ARM] MX1: Add ARMadeus Systems APF9328 board support   Uwe Kleine-König
• [PATCH 1/2] ARM: mx5/mx51_babbage: Move GPIO initialization for USB PHY Reset line to commom place   Uwe Kleine-König
• [PATCH 2/2] ARM: mx5/mx51_babbage: Use gpio_request_one when possible   Uwe Kleine-König
• [PATCH] PXA: Fix typo in proc-xscale.S   Uwe Kleine-König
• [PATCH v2 5/5] driver core: let dev_set_drvdata return int instead of void as it can fail   Uwe Kleine-König
• [PATCH v2 02/23] at91: Make Ethernet device common   Uwe Kleine-König
• [PATCH 8/9] ARM: zImage: remove the static qualifier from global data variables   Uwe Kleine-König
• [PATCHv2 0/9] macb: add support for Cadence GEM   Peter Korsgaard
• [PATCH][Trivial] ARM: Remove duplicate linux/sched.h include from arch/arm/plat-iop/time.c   Jiri Kosina
• [trivial PATCH 2/2] arm: mach-u300/gpio: Fix mem_region resource size miscalculations   Jiri Kosina
• [trivial PATCH 1/2] treewide: Fix iomap resource size miscalculations   Jiri Kosina
• [PATCH 2/5] dmaengine: at_hdmac: add cyclic DMA operation support   Koul, Vinod
• [PATCH 2/5] dmaengine: at_hdmac: add cyclic DMA operation support   Koul, Vinod
• [PATCH 2/6] dmaengine/dw_dmac: Enable resubmission from callback routine.   Koul, Vinod
• [PATCH 2/6] dmaengine/dw_dmac: Enable resubmission from callback routine.   Koul, Vinod
• [PATCH V2 0/7] dmaengine/dw_dmac updates   Koul, Vinod
• [PATCH v2 1/5] dmaengine: at_hdmac: modify way to use interrupts   Koul, Vinod
• [PATCH v2 1/5] dmaengine: at_hdmac: modify way to use interrupts   Koul, Vinod
• [PATCH v2 1/5] dmaengine: at_hdmac: modify way to use interrupts   Koul, Vinod
• V4L/ARM: videobuf-dma-contig no longer works on my ARM machine (was: [PATCH v3] SoC Camera: add driver for OMAP1 camera interface)   Janusz Krzysztofik
• V4L/ARM: videobuf-dma-contig no longer works on my ARM machine   Janusz Krzysztofik
• [PATCH 2.6.39] V4L: videobuf-dma-contig: fix mmap_mapper broken on ARM   Janusz Krzysztofik
• [PATCH 2.6.39] V4L: videobuf-dma-contig: fix mmap_mapper broken on ARM   Janusz Krzysztofik
• [PATCH 2.6.39] V4L: videobuf-dma-contig: fix mmap_mapper broken on ARM   Janusz Krzysztofik
• [PATCH 2.6.39 v2] V4L: videobuf-dma-contig: fix mmap_mapper broken on ARM   Janusz Krzysztofik
• V4L/ARM: videobuf-dma-contig no longer works on my ARM machine   Janusz Krzysztofik
• [PATCH 2.6.39 v2] V4L: videobuf-dma-contig: fix mmap_mapper broken on ARM   Janusz Krzysztofik
• [PATCH 2.6.39 v2] V4L: videobuf-dma-contig: fix mmap_mapper broken on ARM   Janusz Krzysztofik
• [PATCH 2.6.39 v2] V4L: videobuf-dma-contig: fix mmap_mapper broken on ARM   Janusz Krzysztofik
• [PATCH 2.6.39 v2] V4L: videobuf-dma-contig: fix mmap_mapper broken on ARM   Janusz Krzysztofik
• [PATCH 2.6.39 v2] V4L: videobuf-dma-contig: fix mmap_mapper broken on ARM   Janusz Krzysztofik
• [PATCH 2.6.39 v2] V4L: videobuf-dma-contig: fix mmap_mapper broken on ARM   Janusz Krzysztofik
• [PATCH 1/6] dmaengine/dw_dmac: Replace spin_lock_bh with irqsave variants   Viresh Kumar
• [PATCH 2/6] dmaengine/dw_dmac: Enable resubmission from callback routine.   Viresh Kumar
• [PATCH 3/6] dmaengine/dw_dmac: call dwc_descriptor_complete from dwc_control with lock held   Viresh Kumar
• [PATCH 4/6] dmaengine/dw_dmac: don't call callback routine in case dmaengine_terminate_all() is called   Viresh Kumar
• [PATCH 5/6] dmaengine/dw_dmac: set residue as total len in dwc_tx_status if status is !DMA_SUCCESS   Viresh Kumar
• [PATCH 6/6] dmaengine/dw_dmac: Divide one sg to many desc, if sg len is greater than DWC_MAX_COUNT   Viresh Kumar
• [PATCH] tty/serial/pl011: don't print error msg if dmaengine_pause is not supported   Viresh Kumar
• [PATCH V2 0/7] dmaengine/dw_dmac updates   Viresh Kumar
• [PATCH V2 1/7] dmaengine/dw_dmac: Replace spin_lock_bh with irqsave variants   Viresh Kumar
• [PATCH V2 2/7] dmaengine/dw_dmac: Enable resubmission from callback routine.   Viresh Kumar
• [PATCH V2 3/7] dmaengine/dw_dmac: call dwc_descriptor_complete from dwc_control with lock held   Viresh Kumar
• [PATCH V2 4/7] dmaengine/dw_dmac: don't call callback routine in case dmaengine_terminate_all() is called   Viresh Kumar
• [PATCH V2 5/7] dmaengine/dw_dmac: set residue as total len in dwc_tx_status if status is !DMA_SUCCESS   Viresh Kumar
• [PATCH V2 6/7] dmaengine/dw_dmac: Divide one sg to many desc, if sg len is greater than DWC_MAX_COUNT   Viresh Kumar
• [PATCH V2 7/7] dmaengine/dw_dmac: implement pause and resume in dwc_control   Viresh Kumar
• [PATCH V2 7/7 resend] dmaengine/dw_dmac: implement pause and resume in dwc_control   Viresh Kumar
• [PATCH resend] rtc: Adding support for spear rtc   Viresh Kumar
• [PATCH V3 0/7] dmaengine/dw_dmac updates   Viresh Kumar
• [PATCH V3 1/7] dmaengine/dw_dmac: call dwc_descriptor_complete from dwc_control with lock held   Viresh Kumar
• [PATCH V3 2/7] dmaengine/dw_dmac: Replace spin_lock* with irqsave variants   Viresh Kumar
• [PATCH V3 3/7] dmaengine/dw_dmac: don't call callback routine in case dmaengine_terminate_all() is called   Viresh Kumar
• [PATCH V3 4/7] dmaengine/dw_dmac: Enable resubmission from callback routine.   Viresh Kumar
• [PATCH V3 5/7] dmaengine/dw_dmac: set residue as total len in dwc_tx_status if status is !DMA_SUCCESS   Viresh Kumar
• [PATCH V3 6/7] dmaengine/dw_dmac: Divide one sg to many desc, if sg len is greater than DWC_MAX_COUNT   Viresh Kumar
• [PATCH V3 7/7] dmaengine/dw_dmac: implement pause and resume in dwc_control   Viresh Kumar
• [PATCH V3 0/7] dmaengine/dw_dmac updates   Viresh Kumar
• [PATCH V3 1/7] dmaengine/dw_dmac: call dwc_descriptor_complete from dwc_control with lock held   Viresh Kumar
• [PATCH V3 2/7] dmaengine/dw_dmac: Replace spin_lock* with irqsave variants   Viresh Kumar
• [PATCH V3 3/7] dmaengine/dw_dmac: don't call callback routine in case dmaengine_terminate_all() is called   Viresh Kumar
• [PATCH V3 4/7] dmaengine/dw_dmac: Enable resubmission from callback routine.   Viresh Kumar
• [PATCH V3 5/7] dmaengine/dw_dmac: set residue as total len in dwc_tx_status if status is !DMA_SUCCESS   Viresh Kumar
• [PATCH V3 6/7] dmaengine/dw_dmac: Divide one sg to many desc, if sg len is greater than DWC_MAX_COUNT   Viresh Kumar
• [PATCH V3 7/7] dmaengine/dw_dmac: implement pause and resume in dwc_control   Viresh Kumar
• [RFC PATCH v1] EP93XX: Add ADC support   Blagoj Kupev
• [PATCH 3/3] drivers/video/s3c2410fb.c: Convert release_resource to release_mem_region   Julia Lawall
• [PATCH] ARM: tegra: Ensure all sched_clock() implementations are notrace marked   Ks Lee
• accessing vfpinstr macros from outside vfp directory   Neil Leeder
• arm: pmu: support pmu/perf on OMAP4 - booting problem on pandaboard   Ming Lei
• arm: pmu: support pmu/perf on OMAP4 - booting problem on pandaboard   Ming Lei
• arm: pmu: support pmu/perf on OMAP4 - booting problem on pandaboard   Ming Lei
• arm: pmu: support pmu/perf on OMAP4 - booting problem on pandaboard   Ming Lei
• [PATCH] ARM: The mandatory barrier rmb() must be a dsb() in for device accesses   Ming Lei
• arm: pmu: support pmu/perf on OMAP4 - booting problem on pandaboard   Ming Lei
• [PATCH] ARM: The mandatory barrier rmb() must be a dsb() in for device accesses   Ming Lei
• [PATCH] ARM: The mandatory barrier rmb() must be a dsb() in for device accesses   Ming Lei
• [RFC] Extending ARM perf-events for multiple PMUs   Ming Lei
• [RFC] Extending ARM perf-events for multiple PMUs   Ming Lei
• [PATCH] ARM: fix badly implementation of wmb   Ming Lei
• [PATCH 1/2] arm: Replace CONFIG_HAS_TLS_REG with HWCAP_TLS and check for it on V6   Li Li
• [PATCH 1/2] arm: Replace CONFIG_HAS_TLS_REG with HWCAP_TLS and check for it on V6   Li Li
• [PATCH 1/2] arm: Replace CONFIG_HAS_TLS_REG with HWCAP_TLS and check for it on V6   Li Li
• [PATCH] V4L: mx3_camera: select VIDEOBUF2_DMA_CONTIG instead of VIDEOBUF_DMA_CONTIG   Guennadi Liakhovetski
• RFC, GIC based smp_cross_call cleanup suggestion   Grant Likely
• RFC, GIC based smp_cross_call cleanup suggestion   Grant Likely
• [PATCH v2] arm/dt: Add a make rule to build dtb for enabled boards   Grant Likely
• [PATCH v2] arm/dt: Add a make rule to build dtb for enabled boards   Grant Likely
• [PATCH/RFC 2/6] OMAP2+: PM: move runtime PM implementation to use device power domains   Grant Likely
• [patch 1/2] Add dt_compat field to struct gpio_chip   Grant Likely
• [PATCH] spi: Fix race condition in stop_queue()   Grant Likely
• [patch 1/2] Add dt_compat field to struct gpio_chip   Grant Likely
• [patch 1/2] Add dt_compat field to struct s3c_gpio_chip   Grant Likely
• [patch 2/2] Add GPIO DT support to s3c24xx   Grant Likely
• [PATCH] ARM: add DT support to the S3C SDI driver   Grant Likely
• [PATCH] ARM: add DT support to the S3C SDI driver   Grant Likely
• Status of arch/arm in linux-next   Grant Likely
• [RFC PATCH] Consolidate SRAM support   Grant Likely
• Status of arch/arm in linux-next   Grant Likely
• [PATCH 5/6] ARM: nmk: update GPIO chained IRQ handler to entry/exit functions   Grant Likely
• [PATCH v5 0/8] Basic ARM devicetree support   Grant Likely
• [PATCH v5 1/8] arm/dt: Make __vet_atags also accept a dtb image   Grant Likely
• [PATCH v5 2/8] arm/dt: Allow CONFIG_OF on ARM   Grant Likely
• [PATCH v5 3/8] arm/dt: consolidate atags setup into setup_machine_atags   Grant Likely
• [PATCH v5 4/8] arm/dt: probe for platforms via the device tree   Grant Likely
• [PATCH v5 5/8] arm/dt: Drop irq_create_of_mapping() from arm code.   Grant Likely
• [PATCH v5 6/8] arm/dt: Basic versatile devicetree support   Grant Likely
• [PATCH v5 7/8] arm/dt: Basic tegra devicetree support   Grant Likely
• [PATCH v5 8/8] dt: add documentation of ARM dt boot interface   Grant Likely
• [PATCHv3] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Grant Likely
• [PATCHv3] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Grant Likely
• [PATCH v5 5/8] arm/dt: Drop irq_create_of_mapping() from arm code.   Grant Likely
• [PATCH v5 8/8] dt: add documentation of ARM dt boot interface   Grant Likely
• [PATCH] ARM: ARCH_SMDK2410: add select S3C_DEV_USB_HOST to fix build error   Axel Lin
• [PATCH] arm: omap: introduce OMAP MCOP board file   Tony Lindgren
• [PATCHv3] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Tony Lindgren
• Status of arch/arm in linux-next   Tony Lindgren
• Status of arch/arm in linux-next   Tony Lindgren
• [PATCH 1/2] Add a common struct clk   Tony Lindgren
• Status of arch/arm in linux-next   Tony Lindgren
• Status of arch/arm in linux-next   Tony Lindgren
• [RFC PATCH] Consolidate SRAM support   Tony Lindgren
• Status of arch/arm in linux-next   Tony Lindgren
• [RFC PATCH] Consolidate SRAM support   Tony Lindgren
• [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache   Tony Lindgren
• [RFC PATCH v2] Consolidate SRAM support   Tony Lindgren
• Status of arch/arm in linux-next   Tony Lindgren
• [v2 0/7] OMAP: GPIO: Use PM runtime framework   Tony Lindgren
• genirq: Implement a generic interrupt chip   Tony Lindgren
• [PATCH] arm: omap2/3: Use generic irq chip   Tony Lindgren
• genirq: Implement a generic interrupt chip   Tony Lindgren
• [PATCH v4 0/4] OMAP: DMA: mstandby mode and runtime pm support   Tony Lindgren
• [RFC PATCH] Consolidate SRAM support   Tony Lindgren
• [PATCH 0/3] fix some issues with the kernel decompressor   Tony Lindgren
• Status of arch/arm in linux-next   Tony Lindgren
• [PATCH v2] arm: omap2: enable smc instruction for sleep34xx   Tony Lindgren
• [PATCH 0/3] fix some issues with the kernel decompressor   Tony Lindgren
• [v2 0/7] OMAP: GPIO: Use PM runtime framework   Tony Lindgren
• [PATCH 0/3] fix some issues with the kernel decompressor   Tony Lindgren
• [PATCH] omap: Run make savedefconfig on omap2plus_defconfig to shrink it   Tony Lindgren
• [PATCHv3] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Tony Lindgren
• [PATCH] omap: Run make savedefconfig on omap2plus_defconfig to shrink it   Tony Lindgren
• [PATCH] omap: Run make savedefconfig on omap2plus_defconfig to shrink it   Tony Lindgren
• [PATCH] ARM: Fix relocation if image end past uncompressed kernel end   Tony Lindgren
• [PATCH RFC] clk: add support for automatic parent handling   Tony Lindgren
• [PATCH RFC] clk: add support for automatic parent handling   Tony Lindgren
• [PATCHv3] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Tony Lindgren
• [PATCH 1/3] ARM: zImage: no need to get the decompressed size from the filesystem   Tony Lindgren
• [PATCH 2/3] ARM: compressed/misc.c: simplify decompress_kernel()   Tony Lindgren
• [PATCH 3/3] ARM: zImage: fix issues with missing GOT entries for some global variables   Tony Lindgren
• [PATCH] ARM: Fix relocation if image end past uncompressed kernel end   Tony Lindgren
• [v2 0/7] OMAP: GPIO: Use PM runtime framework   Tony Lindgren
• [PATCH] ARM: Fix relocation if image end past uncompressed kernel end   Tony Lindgren
• [PATCH RFC] clk: add support for automatic parent handling   Tony Lindgren
• Status of arch/arm in linux-next   Tony Lindgren
• [v2 0/7] OMAP: GPIO: Use PM runtime framework   Tony Lindgren
• [patch 00/16] arm: Replace arm sched_clock by clocksource based sched_clock   Tony Lindgren
• [PATCH] ARM: Fix relocation if image end past uncompressed kernel end   Tony Lindgren
• [PATCH] ARM: Fix bad SP address after relocating kernel   Tony Lindgren
• [PATCH] ARM: Fix bad SP address after relocating kernel   Tony Lindgren
• [PATCH] ARM: Fix relocation if image end past uncompressed kernel end   Tony Lindgren
• [PATCH] ARM: Fix relocation if image end past uncompressed kernel end   Tony Lindgren
• [PATCH] arm: omap2plus: GPIO cleanup mach-omap2/*   Tony Lindgren
• [PATCHv3] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Tony Lindgren
• [PATCHv3] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Tony Lindgren
• [PATCHv3] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Tony Lindgren
• [PATCH] ARM: Fix relocation if image end past uncompressed kernel end   Tony Lindgren
• [PATCH] ARM: Fix relocation if image end past uncompressed kernel end   Tony Lindgren
• [PATCH 2/3] ARM: compressed/misc.c: simplify decompress_kernel()   Tony Lindgren
• [PATCH 09/14] at91: switch pit timer to early platform devices   Tony Lindgren
• [PATCH 1/9] ARM: zImage: make sure the stack is 64-bit aligned   Tony Lindgren
• [PATCH 3/9] ARM: zImage: make sure not to relocate on top of the relocation code   Tony Lindgren
• [PATCH 4/9] ARM: zImage: the page table memory must be considered before relocation   Tony Lindgren
• [PATCH 7/9] ARM: zImage: don't ignore error returned from decompress()   Tony Lindgren
• [PATCH 8/9] ARM: zImage: remove the static qualifier from global data variables   Tony Lindgren
• [PATCH 9/9] ARM: zImage: make sure no GOTOFF relocs are used with .bss symbols   Tony Lindgren
• [PATCH 2/3] ARM: compressed/misc.c: simplify decompress_kernel()   Tony Lindgren
• [GIT PULL] omap fixes for v2.6.39-rc5   Tony Lindgren
• [PATCHv3] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Tony Lindgren
• [patch 00/16] arm: Replace arm sched_clock by clocksource based sched_clock   Tony Lindgren
• [PATCH 01/10] Add a common struct clk   Tony Lindgren
• [patch 07/16] arm: omap: Use clocksource based sched_clock   Tony Lindgren
• [patch 07/16] arm: omap: Use clocksource based sched_clock   Tony Lindgren
• [PATCHv3] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Tony Lindgren
• RFC, GIC based smp_cross_call cleanup suggestion   John Linn
• [GIT PULL] Xilinx ARM support for 2.6.40   John Linn
• [PATCH 0/3] ARM: Xilinx: Adding SMP Support   John Linn
• [PATCH 1/3] ARM: Xilinx: add timer and on chip memory support for SMP   John Linn
• [PATCH 2/3] ARM: Xilinx: add SMP specific support files   John Linn
• [PATCH 3/3] ARM: Xilinx: update of infrastructure for SMP   John Linn
• RFC, GIC based smp_cross_call cleanup suggestion   John Linn
• [PATCH 2/3] ARM: Xilinx: add SMP specific support files   John Linn
• [PATCH 2/3] ARM: Xilinx: add SMP specific support files   John Linn
• [PATCH 1/3] ARM: Xilinx: add timer and on chip memory support for SMP   John Linn
• [PATCH V6 0/5] ARM: Basic Xilinx Support   John Linn
• [PATCH V6 1/5] ARM: Xilinx: Adding Xilinx board support   John Linn
• [PATCH V6 2/5] ARM: Xilinx: Adding timer support to the platform   John Linn
• [PATCH V6 3/5] ARM: Xilinx: base header files and assembly macros   John Linn
• [PATCH V6 4/5] ARM: Xilinx: Adding Xilinx platform infrastructure support   John Linn
• [PATCH V6 5/5] ARM: Xilinx: adding device tree support   John Linn
• For SMP, Is platform specific secondary startup function really needed?   John Linn
• For SMP, Is platform specific secondary startup functionreally needed?   John Linn
• For SMP, Is platform specific secondary startup functionreally needed?   John Linn
• [PATCH V2 0/4] ARM: Xilinx: Adding SMP Support   John Linn
• [PATCH V2 1/4] ARM: Xilinx: Add on chip memory for SMP support   John Linn
• [PATCH V2 2/4] ARM: Xilinx: Adding local timer to support SMP   John Linn
• [PATCH V2 3/4] ARM: Xilinx: add SMP specific support files   John Linn
• [PATCH V2 4/4] ARM: Xilinx: update of infrastructure for SMP   John Linn
• [GIT PULL] Xilinx ARM support for 2.6.40   John Linn
• [GIT PULL] omap changes for v2.6.39 merge window   Russell King - ARM Linux
• [PATCH 2/9] ARM: pxa: enable sparsemem in saarb   Russell King - ARM Linux
• [PATCH 2/9] ARM: pxa: enable sparsemem in saarb   Russell King - ARM Linux
• [PATCH 4/9] ARM: pxa: use gpio reset   Russell King - ARM Linux
• [PATCH 9/9] ARM: mmp: enable max7312 gpio expander in dkb   Russell King - ARM Linux
• RFC, GIC based smp_cross_call cleanup suggestion   Russell King - ARM Linux
• kirkwood build failure on mainline   Russell King - ARM Linux
• RFC, GIC based smp_cross_call cleanup suggestion   Russell King - ARM Linux
• [PATCH] ARM: Suspend: Fix build error on ARCH_S5PC100   Russell King - ARM Linux
• [PATCH 1/2] ARM: Make consolidated PM sleep code depend on PM_SLEEP   Russell King - ARM Linux
• [PATCH 2/2] ARM: Only allow PM_SLEEP with CPUs which support suspend   Russell King - ARM Linux
• RFC, GIC based smp_cross_call cleanup suggestion   Russell King - ARM Linux
• RFC, GIC based smp_cross_call cleanup suggestion   Russell King - ARM Linux
• RFC, GIC based smp_cross_call cleanup suggestion   Russell King - ARM Linux
• [PATCH 1/2] ARM: Make consolidated PM sleep code depend on PM_SLEEP   Russell King - ARM Linux
• RFC, GIC based smp_cross_call cleanup suggestion   Russell King - ARM Linux
• [GIT PULL] omap changes for v2.6.39 merge window   Russell King - ARM Linux
• RFC, GIC based smp_cross_call cleanup suggestion   Russell King - ARM Linux
• RFC, GIC based smp_cross_call cleanup suggestion   Russell King - ARM Linux
• [PATCH] OMAP4: SRAM: Fix warning: format '%08lx' expects type 'long unsigned int'   Russell King - ARM Linux
• [PATCH] ARCH arm: adding new board: CDU   Russell King - ARM Linux
• [PATCH] ARCH arm: adding new board: CDU   Russell King - ARM Linux
• [GIT PULL] omap changes for v2.6.39 merge window   Russell King - ARM Linux
• [PATCH 2/3] Use gpio_set_value_cansleep() in corgi_lcd.c   Russell King - ARM Linux
• [PATCH 2/3] Use gpio_set_value_cansleep() in corgi_lcd.c   Russell King - ARM Linux
• [GIT PULL] omap changes for v2.6.39 merge window   Russell King - ARM Linux
• [PATCH 4/4] Do not call flush_cache_user_range with mmap_sem held   Russell King - ARM Linux
• [PATCH] plat-mxc: Provide irq_chip name for GPIO IRQs   Russell King - ARM Linux
• [PATCH 2/3] ARM: Xilinx: add SMP specific support files   Russell King - ARM Linux
• [PATCH v2 1/2] ARM: mxc: Introduce imx_add_gpio_leds   Russell King - ARM Linux
• [PATCH v2 1/2] ARM: mxc: Introduce imx_add_gpio_leds   Russell King - ARM Linux
• [PATCH v2 1/2] ARM: mxc: Introduce imx_add_gpio_leds   Russell King - ARM Linux
• [GIT PULL] omap changes for v2.6.39 merge window   Russell King - ARM Linux
• [PATCH v2 1/2] ARM: mxc: Introduce imx_add_gpio_leds   Russell King - ARM Linux
• [PATCH] ARM: type casts update_sched_clock cyc_to_sched_clock cyc_to_fixed_sched_clock   Russell King - ARM Linux
• [PATCH v2 1/2] ARM: mxc: Introduce imx_add_gpio_leds   Russell King - ARM Linux
• [PATCH v2 1/2] ARM: mxc: Introduce imx_add_gpio_leds   Russell King - ARM Linux
• [PATCH] ARM: type casts update_sched_clock cyc_to_sched_clock cyc_to_fixed_sched_clock   Russell King - ARM Linux
• [PATCH] arm: omap: introduce OMAP MCOP board file   Russell King - ARM Linux
• [PATCH] ARM: type casts update_sched_clock cyc_to_sched_clock cyc_to_fixed_sched_clock   Russell King - ARM Linux
• RFC: Status of kernel/fiq.c   Russell King - ARM Linux
• [PATCH 33/34] usb/lh7a40x_udc: Drop __DATE__ usage   Russell King - ARM Linux
• [PATCH] leds: provide helper to register "leds-gpio" devices   Russell King - ARM Linux
• [PATCH 0/2] ARM: Unify setup for Marvell SheevaPlugs and Seagate DockStars   Russell King - ARM Linux
• howto set some kernel pages to readonly?   Russell King - ARM Linux
• [PATCH 1/2] ARM: Differentiate SheevaPlugs and DockStars on the basis of the memory size.   Russell King - ARM Linux
• [RFC 1/5]arch/arm/common/Makefile Remove unused config in the Makefile.   Russell King - ARM Linux
• [RFC PATCH] ARM: fiq: Refactor {get,set}_fiq_regs() for Thumb-2   Russell King - ARM Linux
• [PATCH 1/2] ARM: Differentiate SheevaPlugs and DockStars on the basis of the memory size.   Russell King - ARM Linux
• [PATCH 2/2] ARM: fix personality flag propagation across an exec   Russell King - ARM Linux
• [PATCH 2/2] ARM: fix personality flag propagation across an exec   Russell King - ARM Linux
• [PATCH 1/5 V2]arch:common:Makefile Remove unused config in the Makefile.   Russell King - ARM Linux
• [PATCH 2/2] ARM: fix personality flag propagation across an exec   Russell King - ARM Linux
• [PATCH] ux500: Adding support for u8500 Hsem functionality.   Russell King - ARM Linux
• V4L/ARM: videobuf-dma-contig no longer works on my ARM machine (was: [PATCH v3] SoC Camera: add driver for OMAP1 camera interface)   Russell King - ARM Linux
• dmaengine: Can we schedule new transfer from dma callback routine??   Russell King - ARM Linux
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Russell King - ARM Linux
• since when does ARM map the kernel memory in sections?   Russell King - ARM Linux
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Russell King - ARM Linux
• A15 h/w virtulization support   Russell King - ARM Linux
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Russell King - ARM Linux
• [PATCH 3/7] ARM: mmp: set correct uart according to board   Russell King - ARM Linux
• [PATCH 2.6.39 v2] V4L: videobuf-dma-contig: fix mmap_mapper broken on ARM   Russell King - ARM Linux
• [PATCH] ARM: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORS   Russell King - ARM Linux
• [PATCH v3] leds: provide helper to register "leds-gpio" devices   Russell King - ARM Linux
• MT_HIGH_VECTOR mapping set read-only creating illegal access   Russell King - ARM Linux
• [PATCH 2.6.39 v2] V4L: videobuf-dma-contig: fix mmap_mapper broken on ARM   Russell King - ARM Linux
• [PATCH 2.6.39 v2] V4L: videobuf-dma-contig: fix mmap_mapper broken on ARM   Russell King - ARM Linux
• [PATCH] arm: cputype.h uses __attribute_const__ which requires including kernel.h   Russell King - ARM Linux
• Status of arch/arm in linux-next   Russell King - ARM Linux
• [PATCH 0/2] Common struct clk implementation, v14   Russell King - ARM Linux
• [PATCH] ARM: S3C64XX: Initial support for Wolfson/Simtec Cragganmore/Banff   Russell King - ARM Linux
• [PATCH] ARM: Remove clkdev.o build in arch/arm/common/Makefile   Russell King - ARM Linux
• [PATCH 0/2] Common struct clk implementation, v14   Russell King - ARM Linux
• [PATCH 0/2] Common struct clk implementation, v14   Russell King - ARM Linux
• Status of arch/arm in linux-next   Russell King - ARM Linux
• [PATCH 0/2] Common struct clk implementation, v14   Russell King - ARM Linux
• [PATCH v2] at91: remove MTD_NAND_ATMEL_BUSWIDTH_16 option   Russell King - ARM Linux
• Status of arch/arm in linux-next   Russell King - ARM Linux
• [PATCH 0/2] Common struct clk implementation, v14   Russell King - ARM Linux
• [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache   Russell King - ARM Linux
• [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache   Russell King - ARM Linux
• dmaengine: Can we schedule new transfer from dma callback routine??   Russell King - ARM Linux
• [PATCH] ARM: Davinci: Fix I2C build errors   Russell King - ARM Linux
• [PATCH] ARM: Davinci: Fix I2C build errors   Russell King - ARM Linux
• [RFC PATCH] Consolidate SRAM support   Russell King - ARM Linux
• [RFC PATCH] Consolidate SRAM support   Russell King - ARM Linux
• [RFC PATCH] Consolidate SRAM support   Russell King - ARM Linux
• [RFC PATCH] Consolidate SRAM support   Russell King - ARM Linux
• [RFC PATCH] Consolidate SRAM support   Russell King - ARM Linux
• Status of arch/arm in linux-next   Russell King - ARM Linux
• Status of arch/arm in linux-next   Russell King - ARM Linux
• [RFC PATCH] Consolidate SRAM support   Russell King - ARM Linux
• [RFC PATCH] Consolidate SRAM support   Russell King - ARM Linux
• [RFC PATCH] Consolidate SRAM support   Russell King - ARM Linux
• [RFC PATCH] Consolidate SRAM support   Russell King - ARM Linux
• [RFC] sanitizing crazy clock data files   Russell King - ARM Linux
• [RFC PATCH] Consolidate SRAM support   Russell King - ARM Linux
• [RFC PATCH] Consolidate SRAM support   Russell King - ARM Linux
• [RFC] sanitizing crazy clock data files   Russell King - ARM Linux
• [RFC] sanitizing crazy clock data files   Russell King - ARM Linux
• Status of arch/arm in linux-next   Russell King - ARM Linux
• [RFC PATCH] Consolidate SRAM support   Russell King - ARM Linux
• [PATCH] ARM: fix badly implementation of wmb   Russell King - ARM Linux
• [PATCH] V4L: mx3_camera: select VIDEOBUF2_DMA_CONTIG instead of VIDEOBUF_DMA_CONTIG   Russell King - ARM Linux
• [RFC PATCH v2] Consolidate SRAM support   Russell King - ARM Linux
• [PATCH] tty/serial/pl011: don't print error msg if dmaengine_pause is not supported   Russell King - ARM Linux
• [RFC PATCH v2] Consolidate SRAM support   Russell King - ARM Linux
• Status of arch/arm in linux-next   Russell King - ARM Linux
• [PATCH 06/10] clk: Add support for a generic clock multiplexer   Russell King - ARM Linux
• [PATCH 06/10] clk: Add support for a generic clock multiplexer   Russell King - ARM Linux
• [PATCH] mmci: sync DATAEND irq with dma transfer done   Russell King - ARM Linux
• [PATCH 4/7] v4l: videobuf2: add IOMMU based DMA memory allocator   Russell King - ARM Linux
• [RFC 0/4] convert stmp into mxs and delete the obsolete platform   Russell King - ARM Linux
• [PATCH] mmci: sync DATAEND irq with dma transfer done   Russell King - ARM Linux
• [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache   Russell King - ARM Linux
• [RFC PATCH v2] Consolidate SRAM support   Russell King - ARM Linux
• [RFC PATCH v2] Consolidate SRAM support   Russell King - ARM Linux
• [PATCH] leds: provide helper to register "leds-gpio" devices   Russell King - ARM Linux
• Away for Easter   Russell King - ARM Linux
• [PATCH 1/6] dmaengine/dw_dmac: Replace spin_lock_bh with irqsave variants   Russell King - ARM Linux
• [PATCH 2/6] dmaengine/dw_dmac: Enable resubmission from callback routine.   Russell King - ARM Linux
• [PATCH 1/6] dmaengine/dw_dmac: Replace spin_lock_bh with irqsave variants   Russell King - ARM Linux
• Architecture specific implementations for tickless kernel and deferrable timers   Russell King - ARM Linux
• [PATCH] ARM: remove ns9xxx port   Russell King - ARM Linux
• Architecture specific implementations for tickless kernel and deferrable timers   Russell King - ARM Linux
• [PATCH 1/6] dmaengine/dw_dmac: Replace spin_lock_bh with irqsave variants   Russell King - ARM Linux
• [RFC] ARM DMA mapping TODO, v1   Russell King - ARM Linux
• [PATCH] ARM: tegra: consolidate GIC extension usage   Russell King - ARM Linux
• [PATCH v1 3/3]ARM: mmp: support mmc on pxa910 dkb board   Russell King - ARM Linux
• [PATCH] clkdev: add support to lookup for early platform device   Russell King - ARM Linux
• [PATCH 2/3] ARM: compressed/misc.c: simplify decompress_kernel()   Russell King - ARM Linux
• [PATCH 3/3] ARM: zImage: fix issues with missing GOT entries for some global variables   Russell King - ARM Linux
• [PATCH 3/3] ARM: zImage: fix issues with missing GOT entries for some global variables   Russell King - ARM Linux
• [RFC] ARM DMA mapping TODO, v1   Russell King - ARM Linux
• [PATCH v4 01/11] mfd: add pruss mfd driver.   Russell King - ARM Linux
• [PATCH v2 4/6] arm: use asm-generic/bitops/le.h   Russell King - ARM Linux
• [PATCH v2 1/6] arch: add #define for each of optimized find bitops   Russell King - ARM Linux
• [PATCH v2 2/6] bitops: add #ifndef for each of find bitops   Russell King - ARM Linux
• [PATCH] plat-pxa: Enable ability to adjust SD/MMC clocks   Russell King - ARM Linux
• cachepolicy on arm UP/SMP   Russell King - ARM Linux
• [RFC] ARM DMA mapping TODO, v1   Russell King - ARM Linux
• RAID/dmaengine violates the dma-streaming API   Russell King - ARM Linux
• [RFC] ARM DMA mapping TODO, v1   Russell King - ARM Linux
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Russell King - ARM Linux
• [RFC] ARM DMA mapping TODO, v1   Russell King - ARM Linux
• [PATCH 1/3] Framework for exporting System-on-Chip information via sysfs   Russell King - ARM Linux
• About enable L2 cache in Linux kernel   Russell King - ARM Linux
• genirq: Generic irq chip available in git   Russell King - ARM Linux
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Russell King - ARM Linux
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Russell King - ARM Linux
• [PATCH 0/5] ARM: kprobes: Fixes and additions for ARM instruction emulation (part 6)   Russell King - ARM Linux
• [PATCH 2/3] ARM: compressed/misc.c: simplify decompress_kernel()   Russell King - ARM Linux
• [PATCH V2] genalloc: add support to specify the physical address   Russell King - ARM Linux
• [PATCH] clkdev: add support to lookup for early platform device   Russell King - ARM Linux
• [PATCH] clkdev: add support to lookup for early platform device   Russell King - ARM Linux
• [PATCH v2] pxa/hx4700: use gpio arrays for global gpio initialization   Russell King - ARM Linux
• [PATCH v2 1/3] ARM: mmp: add pxa910 mmc resource   Russell King - ARM Linux
• [PATCH v2 02/23] at91: Make Ethernet device common   Russell King - ARM Linux
• [PATCH v2 23/23] at91: Remove mAgic and ISI device code   Russell King - ARM Linux
• [PATCHv3 2.6.40 2/4] ARM: simpad: Cleanup CS3 accessors.   Russell King - ARM Linux
• [PATCHv3 2.6.40 0/4] ARM: simpad: Add support for GPIO attached hardware   Russell King - ARM Linux
• [RFC] ARM DMA mapping TODO, v1   Russell King - ARM Linux
• [RFC] ARM DMA mapping TODO, v1   Russell King - ARM Linux
• [RFC] ARM DMA mapping TODO, v1   Russell King - ARM Linux
• [PATCH] plat-pxa: Enable ability to adjust SD/MMC clocks   Russell King - ARM Linux
• [PATCH] PXA: Fix typo in proc-xscale.S   Russell King - ARM Linux
• [PATCH] clkdev: add support to lookup for early platform device   Russell King - ARM Linux
• [PATCH] mmc: mxs-mmc: add support for pre_req and post_req   Russell King - ARM Linux
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Russell King - ARM Linux
• [RFC] ARM DMA mapping TODO, v1   Russell King - ARM Linux
• [PATCH] PXA: Fix typo in proc-xscale.S   Russell King - ARM Linux
• [PATCH 09/14] at91: switch pit timer to early platform devices   Russell King - ARM Linux
• [PATCH 03/14] at91: factorize at91 interrupts init to soc   Russell King - ARM Linux
• [RFC] ARM DMA mapping TODO, v1   Russell King - ARM Linux
• [RFC] ARM DMA mapping TODO, v1   Russell King - ARM Linux
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Russell King - ARM Linux
• [RFC] ARM DMA mapping TODO, v1   Russell King - ARM Linux
• Architecture specific implementations for tickless kernel and deferrable timers   Russell King - ARM Linux
• [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache   Russell King - ARM Linux
• [PATCH 1/2] MTD: s3c2410_nand: Add option to disable hw ECC at runtime   Russell King - ARM Linux
• [PATCH v4 0/4] OMAP: DMA: mstandby mode and runtime pm support   Russell King - ARM Linux
• [PATCH] OMAP4: SRAM: Fix warning: format '%08lx' expects type 'long unsigned int'   Russell King - ARM Linux
• [PATCH 4/4] omap: musb: introduce default baord config   Russell King - ARM Linux
• Architecture specific implementations for tickless kernel and deferrable timers   Russell King - ARM Linux
• [RFC] ARM DMA mapping TODO, v1   Russell King - ARM Linux
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Russell King - ARM Linux
• [PATCH 1/3] i2c: append hardware lock with bus lock   Russell King - ARM Linux
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Russell King - ARM Linux
• [PATCH 05/10] clk: Add support for simple dividers   Russell King - ARM Linux
• [PATCH 05/10] clk: Add support for simple dividers   Russell King - ARM Linux
• [PATCH] ARM: Include Makefile.boot only when it exists   Russell King - ARM Linux
• [PATCH] ARM: perf: remove erroneous check on active_events   Russell King - ARM Linux
• [PATCH 4/4] omap: musb: introduce default baord config   Russell King - ARM Linux
• Getting a lot of zero values from a driver using DMA. D-cache is not updated?   Russell King - ARM Linux
• [PATCH 2/9] ARM i.MX5: Add IPU device support   Russell King - ARM Linux
• [PATCH 0/5] ARM: kprobes: Fixes and additions for ARM instruction emulation (part 6)   Russell King - ARM Linux
• [PATCH] mmci: sync DATAEND irq with dma transfer done   Russell King - ARM Linux
• [PATCH V3 2/7] dmaengine/dw_dmac: Replace spin_lock* with irqsave variants   Russell King - ARM Linux
• [PATCH V3 3/7] dmaengine/dw_dmac: don't call callback routine in case dmaengine_terminate_all() is called   Russell King - ARM Linux
• [PATCH V3 4/7] dmaengine/dw_dmac: Enable resubmission from callback routine.   Russell King - ARM Linux
• [PATCH 09/14] at91: switch pit timer to early platform devices   Russell King - ARM Linux
• Architecture specific implementations for tickless kernel and deferrable timers   Russell King - ARM Linux
• [PATCH] at91: fix map_io init usage   Russell King - ARM Linux
• [PATCH v2 02/23] at91: Make Ethernet device common   Russell King - ARM Linux
• [PATCH] ARM: Suspend: Fix build error on ARCH_S5PC100   Russell King - ARM Linux
• [PATCH] ARM: The mandatory barrier rmb() must be a dsb() in for device accesses   Russell King - ARM Linux
• [PATCH v4 1/2] ARM: ELF: Define new core note type for VFP registers   Russell King - ARM Linux
• [PATCH] pxa/hx4700: Add hx4700 LED support   Russell King - ARM Linux
• [PATCH v6 1/3] MTD : add the common code for GPMI controller driver   Russell King - ARM Linux
• [PATCH] at91: switch to CLKDEV_LOOKUP   Russell King - ARM Linux
• [PATCH 09/14] at91: switch pit timer to early platform devices   Russell King - ARM Linux
• [PATCH v2 02/23] at91: Make Ethernet device common   Russell King - ARM Linux
• [PATCH] ARM: Include Makefile.boot only when it exists   Russell King - ARM Linux
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Russell King - ARM Linux
• [PATCH v2 5/5] driver core: let dev_set_drvdata return int instead of void as it can fail   Russell King - ARM Linux
• [PATCH v3 02/23] at91: Make Ethernet device common   Russell King - ARM Linux
• [PATCH V3 2/7] dmaengine/dw_dmac: Replace spin_lock* with irqsave variants   Russell King - ARM Linux
• [PATCH 09/14] at91: switch pit timer to early platform devices   Russell King - ARM Linux
• [patch 00/16] arm: Replace arm sched_clock by clocksource based sched_clock   Russell King - ARM Linux
• [PATCH v3 02/23] at91: Make Ethernet device common   Russell King - ARM Linux
• [PATCH 01/10] Add a common struct clk   Russell King - ARM Linux
• [PATCH 04/10] clk: implement parent pass through functions   Russell King - ARM Linux
• [PATCH RFC] clk: add support for automatic parent handling   Russell King - ARM Linux
• [PATCH RFC] clk: add support for automatic parent handling   Russell King - ARM Linux
• [PATCH RFC] clk: add support for automatic parent handling   Russell King - ARM Linux
• [PATCH RFC] clk: add support for automatic parent handling   Russell King - ARM Linux
• [PATCH 01/10] Add a common struct clk   Russell King - ARM Linux
• [PATCH RFC] clk: add support for automatic parent handling   Russell King - ARM Linux
• [PATCH RFC] clk: add support for automatic parent handling   Russell King - ARM Linux
• [PATCH RFC] clk: add support for automatic parent handling   Russell King - ARM Linux
• [PATCH RFC] clk: add support for automatic parent handling   Russell King - ARM Linux
• [PATCH] ARM: Include Makefile.boot only when it exists   Russell King - ARM Linux
• [PATCH] ARM: Include Makefile.boot only when it exists   Russell King - ARM Linux
• [PATCH] mmci: sync DATAEND irq with dma transfer done   Russell King - ARM Linux
• [PATCHv3] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Russell King - ARM Linux
• dma_alloc_writecombine() and MAX_ORDER   Russell King - ARM Linux
• [PATCH 0/5] convert stmp into mxs and delete the then obsolete platform   Russell King - ARM Linux
• Architecture specific implementations for tickless kernel and deferrable timers   Russell King - ARM Linux
• [PATCH RFC] clk: add support for automatic parent handling   Russell King - ARM Linux
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Russell King - ARM Linux
• [PATCH RFC] clk: add support for automatic parent handling   Russell King - ARM Linux
• [PATCH 01/10] Add a common struct clk   Russell King - ARM Linux
• [PATCH 1/1] net/fec: do not pass NULL dev to DMA API   Jason Liu
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Jason Liu
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Jason Liu
• About enable L2 cache in Linux kernel   Jason Liu
• About enable L2 cache in Linux kernel   Jason Liu
• [PATCH 1/2] arm: Replace CONFIG_HAS_TLS_REG with HWCAP_TLS and check for it on V6   Jamie Lokier
• since when does ARM map the kernel memory in sections?   Jamie Lokier
• since when does ARM map the kernel memory in sections?   Jamie Lokier
• since when does ARM map the kernel memory in sections?   Jamie Lokier
• since when does ARM map the kernel memory in sections?   Jamie Lokier
• since when does ARM map the kernel memory in sections?   Jamie Lokier
• MMC and reliable write - was: since when does ARM map the kernel memory in sections?   Jamie Lokier
• since when does ARM map the kernel memory in sections?   Jamie Lokier
• MMC and reliable write - was: since when does ARM map the kernel memory in sections?   Jamie Lokier
• since when does ARM map the kernel memory in sections?   Jamie Lokier
• [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache   Fernando Guzman Lugo
• [PATCH v2 0/3] OMAP: l3: fixes and cleanup   Omar Ramirez Luna
• [PATCH v2 1/3] OMAP3: l3: fix for "irq 10: nobody cared" message   Omar Ramirez Luna
• [PATCH v2 2/3] OMAP3/4: l3: fix omap3_l3_probe error path   Omar Ramirez Luna
• [PATCH v2 3/3] OMAP3/4: l3: minor cleanup for parenthesis and extra spaces   Omar Ramirez Luna
• 2.6.39-rc2 on zaurus: does not build, does not boot   Pavel Machek
• [Zaurus-devel] 2.6.39-rc2 on zaurus: does not build, does not boot   Pavel Machek
• [PATCH 2/3] Use gpio_set_value_cansleep() in corgi_lcd.c   Pavel Machek
• [RFC][PATCH] bcmai: introduce AI driver   Pavel Machek
• [RFC][PATCH] bcmai: introduce AI driver   Pavel Machek
• [PATCH RFC] ARM: PXA27x: CPUFREQ: Don't use fastbus mode   Pavel Machek
• [RFC PATCH] Current status, suspend-to-disk support on ARM   Pavel Machek
• zaurus: mmcblk0: error -110   Pavel Machek
• [RFC PATCH] Current status, suspend-to-disk support on ARM   Pavel Machek
• Zaurus CF tests -- ok   Pavel Machek
• Zaurus CF tests -- ok   Pavel Machek
• since when does ARM map the kernel memory in sections?   Pavel Machek
• since when does ARM map the kernel memory in sections?   Pavel Machek
• since when does ARM map the kernel memory in sections?   Pavel Machek
• [RFC PATCH v2 1/3] PM / Core: suspend_again callback for device PM.   Pavel Machek
• [RFC PATCH v2 1/3] PM / Core: suspend_again callback for device PM.   Pavel Machek
• [PATCH] msm: watchdog: support watchdog on 8x60 and 8960   Pavel Machek
• [Zaurus-devel] 2.6.39-rc5 on zaurus: works   Pavel Machek
• [PATCH 01/10] Add a common struct clk   Pavel Machek
• [PATCH 1/2 v2] OMAP2/3: hwmod: fix the i2c-reset timeout during bootup   Mahadeva, Avinash
• [PATCH] ARCH arm: adding new board: CDU   Ryan Mallon
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Ryan Mallon
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Ryan Mallon
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Ryan Mallon
• [RFC PATCH 00/23] at91: Replace duplicate device initialisation code with common code   Ryan Mallon
• [RFC PATCH 01/23] at91: Add common devices framework   Ryan Mallon
• [RFC PATCH 02/23] at91: Make Ethernet device common   Ryan Mallon
• [RFC PATCH 03/23] at91: Make USB OHCI/EHCI devices common   Ryan Mallon
• [RFC PATCH 04/23] at91: Make UDC device common   Ryan Mallon
• [PATCH 05/23] at91: Make MMC device (at91_mci) common   Ryan Mallon
• [RFC PATCH 05/23] at91: Make MMC device common   Ryan Mallon
• [RFC PATCH 06/23] at91: Make NAND device common   Ryan Mallon
• [RFC PATCH 07/23] at91: Make TWI device common   Ryan Mallon
• [RFC PATCH 08/23] at91: Make SPI device common   Ryan Mallon
• [RFC PATCH 09/23] at91: Make TCB device common   Ryan Mallon
• [RFC PATCH 10/23] at91: Make RTT device common   Ryan Mallon
• [RFC PATCH 11/23] at91: Make watchdog device common   Ryan Mallon
• [RFC PATCH 13/23] at91: Make PWM device common   Ryan Mallon
• [RFC PATCH 14/23] at91: Make SSC device common   Ryan Mallon
• [RFC PATCH 15/23] at91: Make AC97 device common   Ryan Mallon
• [RFC PATCH 16/23] at91: Make LCD controller device common   Ryan Mallon
• [RFC PATCH 17/23] at91: Make touchscreen device common   Ryan Mallon
• [RFC PATCH 18/23] at91: Make HDMAC device common   Ryan Mallon
• [RFC PATCH 19/23] at91: Make RTC device common   Ryan Mallon
• [RFC PATCH 20/23] at91: Make high speed USB gadget device common   Ryan Mallon
• [RFC PATCH 21/23] at91: Make compact flash device common   Ryan Mallon
• [RFC PATCH 22/23] at91: Move at91sam9263 CAN device to common devices   Ryan Mallon
• [RFC PATCH 23/23] at91: Remove mAgic and ISI device code   Ryan Mallon
• [RFC PATCH 12/23] at91: Make UART devices common   Ryan Mallon
• [PATCH 05/23] at91: Make MMC device (at91_mci) common   Ryan Mallon
• [RFC PATCH 02/23] at91: Make Ethernet device common   Ryan Mallon
• [RFC PATCH 00/23] at91: Replace duplicate device initialisation code with common code   Ryan Mallon
• [RFC PATCH 02/23] at91: Make Ethernet device common   Ryan Mallon
• [RFC PATCH 02/23] at91: Make Ethernet device common   Ryan Mallon
• [RFC PATCH 00/23] at91: Replace duplicate device initialisation code with common code   Ryan Mallon
• [RFC PATCH 00/23] at91: Replace duplicate device initialisation code with common code   Ryan Mallon
• [PATCH v2 00/23] at91: Replace duplicate device initialisation code with   Ryan Mallon
• [PATCH v2 01/23] at91: Add common devices framework   Ryan Mallon
• [PATCH v2 02/23] at91: Make Ethernet device common   Ryan Mallon
• [PATCH v2 03/23] at91: Make USB OHCI/EHCI devices common   Ryan Mallon
• [PATCH v2 04/23] at91: Make UDC device common   Ryan Mallon
• [PATCH v2 05/23] at91: Make MMC device common   Ryan Mallon
• [PATCH v2 06/23] at91: Make NAND device common   Ryan Mallon
• [PATCH v2 07/23] at91: Make TWI device common   Ryan Mallon
• [PATCH v2 08/23] at91: Make SPI device common   Ryan Mallon
• [PATCH v2 09/23] at91: Make TCB device common   Ryan Mallon
• [PATCH v2 10/23] at91: Make RTT device common   Ryan Mallon
• [PATCH v2 11/23] at91: Make watchdog device common   Ryan Mallon
• [PATCH v2 13/23] at91: Make PWM device common   Ryan Mallon
• [PATCH v2 14/23] at91: Make SSC device common   Ryan Mallon
• [PATCH v2 15/23] at91: Make AC97 device common   Ryan Mallon
• [PATCH v2 16/23] at91: Make LCD controller device common   Ryan Mallon
• [PATCH v2 17/23] at91: Make touchscreen device common   Ryan Mallon
• [PATCH v2 18/23] at91: Make HDMAC device common   Ryan Mallon
• [PATCH v2 19/23] at91: Make RTC device common   Ryan Mallon
• [PATCH v2 20/23] at91: Make high speed USB gadget device common   Ryan Mallon
• [PATCH v2 21/23] at91: Make compact flash device common   Ryan Mallon
• [PATCH v2 22/23] at91: Move at91sam9263 CAN device to common devices   Ryan Mallon
• [PATCH v2 23/23] at91: Remove mAgic and ISI device code   Ryan Mallon
• [PATCH v2 12/23] at91: Make UART devices common   Ryan Mallon
• [PATCH v2 16/23] at91: Make LCD controller device common   Ryan Mallon
• [PATCH v2 23/23] at91: Remove mAgic and ISI device code   Ryan Mallon
• [PATCH v2 20/23] at91: Make high speed USB gadget device common   Ryan Mallon
• [PATCH v2 02/23] at91: Make Ethernet device common   Ryan Mallon
• [PATCH v2 02/23] at91: Make Ethernet device common   Ryan Mallon
• [PATCH 02/14] at91: introduce commom AT91_BASE_SYS   Ryan Mallon
• [PATCH 03/14] at91: factorize at91 interrupts init to soc   Ryan Mallon
• [PATCH 05/14] at91: use structure to store the current soc   Ryan Mallon
• [PATCH 07/14] at91: switch gpio to early platfrom device   Ryan Mallon
• [PATCH 14/14] at91: move clock subsystem init to soc generic init   Ryan Mallon
• [PATCH 13/14] at91: move register clocks to soc generic init   Ryan Mallon
• [PATCH 14/14] at91: move clock subsystem init to soc generic init   Ryan Mallon
• [PATCH 05/14] at91: use structure to store the current soc   Ryan Mallon
• [PATCH v2 02/23] at91: Make Ethernet device common   Ryan Mallon
• [PATCH v2 23/23] at91: Remove mAgic and ISI device code   Ryan Mallon
• [PATCH 05/14] at91: use structure to store the current soc   Ryan Mallon
• [RFC] ep93xx: switch gpio to early platform device   Ryan Mallon
• [PATCH 05/14] at91: use structure to store the current soc   Ryan Mallon
• [PATCH 05/14] at91: use structure to store the current soc   Ryan Mallon
• [PATCH 05/14] at91: use structure to store the current soc   Ryan Mallon
• [PATCH 0/14] at91: factorize soc init and switch to early platform   Ryan Mallon
• [PATCH 0/14] at91: factorize soc init and switch to early platform   Ryan Mallon
• [PATCH 09/14] at91: switch pit timer to early platform devices   Ryan Mallon
• [PATCH 05/14] at91: use structure to store the current soc   Ryan Mallon
• [PATCH v2 02/23] at91: Make Ethernet device common   Ryan Mallon
• [PATCH 05/14] at91: use structure to store the current soc   Ryan Mallon
• [PATCH 05/14] at91: use structure to store the current soc   Ryan Mallon
• [PATCH v3 00/23] Create common framework for AT91 device initialisation   Ryan Mallon
• [PATCH v3 01/23] at91: Add common devices framework   Ryan Mallon
• [PATCH v3 02/23] at91: Make Ethernet device common   Ryan Mallon
• [PATCH v3 03/23] at91: Make USB OHCI/EHCI devices common   Ryan Mallon
• [PATCH v3 04/23] at91: Make UDC device common   Ryan Mallon
• [PATCH v3 05/23] at91: Make MMC device common   Ryan Mallon
• [PATCH v3 06/23] at91: Make NAND device common   Ryan Mallon
• [PATCH v3 07/23] at91: Make TWI device common   Ryan Mallon
• [PATCH v3 08/23] at91: Make SPI device common   Ryan Mallon
• [PATCH v3 09/23] at91: Make TCB device common   Ryan Mallon
• [PATCH v3 10/23] at91: Make RTT device common   Ryan Mallon
• [PATCH v3 11/23] at91: Make watchdog device common   Ryan Mallon
• [PATCH v3 12/23] at91: Make UART devices common   Ryan Mallon
• [PATCH v3 13/23] at91: Make PWM device common   Ryan Mallon
• [PATCH v3 14/23] at91: Make SSC device common   Ryan Mallon
• [PATCH v3 15/23] at91: Make AC97 device common   Ryan Mallon
• [PATCH v3 16/23] at91: Make LCD controller device common   Ryan Mallon
• [PATCH v3 17/23] at91: Make touchscreen device common   Ryan Mallon
• [PATCH v3 18/23] at91: Make HDMAC device common   Ryan Mallon
• [PATCH v3 19/23] at91: Make RTC device common   Ryan Mallon
• [PATCH v3 20/23] at91: Make high speed USB gadget device common   Ryan Mallon
• [PATCH v3 21/23] at91: Make compact flash device common   Ryan Mallon
• [PATCH v3 22/23] at91: Move at91sam9263 CAN device to common devices   Ryan Mallon
• [PATCH v3 23/23] at91: Remove mAgic and ISI device code   Ryan Mallon
• [PATCH 05/14] at91: use structure to store the current soc   Ryan Mallon
• [PATCH v3 02/23] at91: Make Ethernet device common   Ryan Mallon
• [PATCH v3 00/23] Create common framework for AT91 device initialisation   Ryan Mallon
• Error in head-common.S file while ARM Linux booting   Madhavi Manchala
• [PATCH 00/34] Make kernel build deterministic   Michal Marek
• [PATCH 33/34] usb/lh7a40x_udc: Drop __DATE__ usage   Michal Marek
• [PATCH 33/34] usb/lh7a40x_udc: Drop __DATE__ usage   Michal Marek
• [PATCH 00/34] Make kernel build deterministic   Michal Marek
• [PATCH 00/34] Make kernel build deterministic   Michal Marek
• [GIT PULL] omap changes for v2.6.39 merge window   Catalin Marinas
• [GIT PULL] omap changes for v2.6.39 merge window   Catalin Marinas
• [PATCH 4/4] Do not call flush_cache_user_range with mmap_sem held   Catalin Marinas
• [PATCH 4/4] Do not call flush_cache_user_range with mmap_sem held   Catalin Marinas
• [PATCH 2/3] ARM: Xilinx: add SMP specific support files   Catalin Marinas
• [PATCH v2] ARM: GIC: Convert GIC library to use the IO relaxed operations   Catalin Marinas
• [GIT PULL] omap changes for v2.6.39 merge window   Catalin Marinas
• [GIT PULL] omap changes for v2.6.39 merge window   Catalin Marinas
• For SMP, Is platform specific secondary startup function really needed?   Catalin Marinas
• For SMP, Is platform specific secondary startup functionreally needed?   Catalin Marinas
• [PATCH] ARM: The mandatory barrier rmb() must be a dsb() in for device accesses   Catalin Marinas
• [PATCH] ARM: The mandatory barrier rmb() must be a dsb() in for device accesses   Catalin Marinas
• [PATCH] ARM: fix badly implementation of wmb   Catalin Marinas
• [RFC] ARM DMA mapping TODO, v1   Catalin Marinas
• [RFC] ARM DMA mapping TODO, v1   Catalin Marinas
• [PATCH] ARM: cache-l2x0: fix wrong print of AUX_CTRL register   Catalin Marinas
• [PATCH] ARM: cache-l2x0: fix wrong print of AUX_CTRL register   Catalin Marinas
• [RFC] ARM DMA mapping TODO, v1   Catalin Marinas
• cachepolicy on arm UP/SMP   Catalin Marinas
• [RFC] ARM DMA mapping TODO, v1   Catalin Marinas
• [RFC] ARM DMA mapping TODO, v1   Catalin Marinas
• Prefetching on Cortex-A8   Catalin Marinas
• [PATCH] arm:pm: save the vfp state of last scheduled-out proceed while suspending   Catalin Marinas
• [PATCH] ARM: The mandatory barrier rmb() must be a dsb() in for device accesses   Catalin Marinas
• [RFC] ARM DMA mapping TODO, v1   Catalin Marinas
• The cleanest way to power off a board inside the kernel.   javier Martin
• [PATCH 0/2] ARM: ptrace: migrate to regsets and enable VFP coredumps   Dave Martin
• [PATCH 1/2] ARM: ELF: Define new core note type for VFP registers   Dave Martin
• [PATCH 2/2] ARM: ptrace: Migrate to regsets framework   Dave Martin
• [PATCH 1/2] ARM: ELF: Define new core note type for VFP registers   Dave Martin
• [PATCH 1/2] ARM: ELF: Define new core note type for VFP registers   Dave Martin
• [PATCH 2/2] ARM: ptrace: Migrate to regsets framework   Dave Martin
• [PATCH v3 0/2] ARM: ptrace: migrate to regsets and enable VFP coredumps   Dave Martin
• [PATCH v3 1/2] ARM: ELF: Define new core note type for VFP registers   Dave Martin
• [PATCH v3 2/2] ARM: ptrace: Migrate to regsets framework   Dave Martin
• [PATCH v3 0/2] ARM: ptrace: migrate to regsets and enable VFP coredumps   Dave Martin
• [PATCH v4 1/2] ARM: ELF: Define new core note type for VFP registers   Dave Martin
• [PATCH v4 2/2] ARM: ptrace: Migrate to regsets framework   Dave Martin
• [PATCH v3 2/2] ARM: ptrace: Migrate to regsets framework   Dave Martin
• RFC: Status of kernel/fiq.c   Dave Martin
• RFC: Status of kernel/fiq.c   Dave Martin
• [RFC PATCH] ARM: fiq: Refactor {get,set}_fiq_regs() for Thumb-2   Dave Martin
• [RFC PATCH] ARM: fiq: Refactor {get,set}_fiq_regs() for Thumb-2   Dave Martin
• [RFC PATCH] ARM: fiq: Refactor {get,set}_fiq_regs() for Thumb-2   Dave Martin
• [PATCH v2] ARM: fiq: Refactor {get,set}_fiq_regs() for Thumb-2   Dave Martin
• [RFC PATCH] ARM: fiq: Refactor {get,set}_fiq_regs() for Thumb-2   Dave Martin
• [RFC PATCH] ARM: fiq: Refactor {get,set}_fiq_regs() for Thumb-2   Dave Martin
• [RFC PATCH] ARM: fiq: Refactor {get,set}_fiq_regs() for Thumb-2   Dave Martin
• [RFC PATCH] ARM: fiq: Refactor {get,set}_fiq_regs() for Thumb-2   Dave Martin
• [PATCH] increase the use of CONFIG_VECTORS_BASE   Dave Martin
• [PATCH v4 REPOST 0/2] ARM: ptrace: migrate to regsets and enable VFP coredumps   Dave Martin
• [PATCH v4 1/2] ARM: ELF: Define new core note type for VFP registers   Dave Martin
• [PATCH v4 2/2] ARM: ptrace: Migrate to regsets framework   Dave Martin
• [PATCH] arm: omap2: enable smc instruction for sleep34xx   Dave Martin
• [PATCH] arm: omap2: enable smc instruction for sleep34xx   Dave Martin
• [RFC 1/5]arch/arm/common/Makefile Remove unused config in the Makefile.   Justin P. Mattock
• [RFC 1/5]arch/arm/common/Makefile Remove unused config in the Makefile.   Justin P. Mattock
• [RFC 1/6]Fix typo "recieve" in various parts of the kernel.   Justin P. Mattock
• [RFC 1/6]Fix typo "recieve" in various parts of the kernel.   Justin P. Mattock
• [RFC 1/6]Fix typo "recieve" in various parts of the kernel.   Justin P. Mattock
• [PATCH 1/5 V2]arch:common:Makefile Remove unused config in the Makefile.   Justin P. Mattock
• [RFC 1/5]arch/arm/common/Makefile Remove unused config in the Makefile.   Justin P. Mattock
• [RFC 1/6]Fix typo "recieve" in various parts of the kernel.   Justin P. Mattock
• [PATCH 1/5 V2]arch:common:Makefile Remove unused config in the Makefile.   Justin P. Mattock
• [PATCH 1/5 V2]arch:common:Makefile Remove unused config in the Makefile.   Justin P. Mattock
• [PATCH 1/5 V2]arch:common:Makefile Remove unused config in the Makefile.   Justin P. Mattock
• [PATCH 0/2] Common struct clk implementation, v14   Paul McKenney
• LPC2011 Scaling Micro Conf   Paul E. McKenney
• [RFC][PATCH] axi: add AXI bus driver   Hauke Mehrtens
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Hauke Mehrtens
• [PATCH 2/2] arm: omap: gpmc-smsc911x: minor style fixes   Menon, Nishanth
• [PATCH 2/2] arm: omap: gpmc-smsc911x: minor style fixes   Menon, Nishanth
• [PATCH v2 2/2] arm: omap: gpmc-smsc911x: minor style fixes   Menon, Nishanth
• [PATCH 3/9] ARM: mmp: remove redundant macro definition in mfp   Eric Miao
• [PATCH 2/9] ARM: pxa: enable sparsemem in saarb   Eric Miao
• [PATCH 3/9] ARM: mmp: remove redundant macro definition in mfp   Eric Miao
• [PATCH 3/9] ARM: mmp: remove redundant macro definition in mfp   Eric Miao
• [PATCH] pxa2xx_spi: Fix race condition in stop_queue()   Eric Miao
• [PATCH 2/9] ARM: pxa: enable sparsemem in saarb   Eric Miao
• [PATCH 2/2] pcmcia: limit pxa2xx_trizeps4 subdriver to trizeps4 platform   Eric Miao
• [PATCH 1/2] pcmcia: limit pxa2xx_balloon3 subdriver to balloon3 platform   Eric Miao
• [PATCH 2/7] mioa701: drop udc_is_connected   Eric Miao
• [PATCH 4/7] pxa25x: separate lubbock handling to lubbock-usb transceiver   Eric Miao
• [PATCH 4/7] pxa25x: separate lubbock handling to lubbock-usb transceiver   Eric Miao
• [PATCH 2/3] Use gpio_set_value_cansleep() in corgi_lcd.c   Eric Miao
• [PATCH 2/3] Use gpio_set_value_cansleep() in corgi_lcd.c   Eric Miao
• [PATCH] pxa2xx_spi: Fix race condition in stop_queue()   Eric Miao
• [PATCH 4/7] pxa25x: separate lubbock handling to lubbock-usb transceiver   Eric Miao
• [PATCH] spi: Fix race condition in stop_queue()   Eric Miao
• [PATCH] pxa270 rtc wakeup event fix   Eric Miao
• [PATCH] pxa270 rtc wakeup event fix   Eric Miao
• reboot/kexec in 2.6.38   Eric Miao
• zaurus: mmcblk0: error -110   Eric Miao
• [PATCH 2/7] ARM: pxa: always clear LPM bits for PXA168 MFPR   Eric Miao
• [PATCH 5/7] ARM: pxa: align NR_BUILTIN_GPIO with GPIO interrupt number   Eric Miao
• [PATCH 3/7] ARM: mmp: set correct uart according to board   Eric Miao
• [PATCH] ARM: pxa: convert incorrect IRQ_TO_IRQ() to irq_to_gpio()   Eric Miao
• [GIT PULL] pxa: fixes for v2.6.39-rc3   Eric Miao
• [PATCH] ARM: Include Makefile.boot only when it exists   Eric Miao
• [PATCH] ARM: pxa: enable AUTO_ZRELADDR and remove now useless Makefile.boot   Eric Miao
• [PATCH 7/7] gpio-vbus: ask for vbus_draw regulator before registering xceiv   Eric Miao
• [PATCH] rtc: max8925 crash since driver data not set before interrupt   Eric Miao
• [PATCH] pxa/hx4700: bq24022 regulator needs to be enabled   Eric Miao
• [PATCH] pxa/hx4700: bq24022 regulator needs to be enabled   Eric Miao
• [PATCH] ARM: Include Makefile.boot only when it exists   Eric Miao
• [PATCH 1/7] ARM: pxa: add clk_set_rate()   Eric Miao
• [PATCH v1 1/3]ARM: mmp: add pxa910 mmc resource   Eric Miao
• [PATCH v1 2/3]ARM: mmp: append mmc 2v8 regulator on dkb board   Eric Miao
• [PATCH v1 3/3]ARM: mmp: support mmc on pxa910 dkb board   Eric Miao
• [PATCH] pxa/magician: bq24022 regulator needs to be enabled   Eric Miao
• [PATCH] pxa/mioa701: use gpio arrays for global and gsm gpio initialization   Eric Miao
• [patch 08/16] arm: pxa: Use clocksource based sched_clock   Eric Miao
• [PATCH] Trivial: ARM: pxa168: Bug fix - correct UART DMA channels   Eric Miao
• [PATCH 1/2] ARM: pxa: avoid accessing interrupt registers directly   Eric Miao
• [PATCH 2/2] ARM: pxa: introduce {icip, ichp}_handle_irq() to prepare MULTI_IRQ_HANDLER   Eric Miao
• [PATCH 1/3] i2c: append hardware lock with bus lock   Eric Miao
• [PATCH v2 1/3] ARM: mmp: add pxa910 mmc resource   Eric Miao
• [PATCH] PXA: Fix typo in proc-xscale.S   Eric Miao
• [GIT PULL] pxa: fix for v2.6.39-rc4   Eric Miao
• [PATCH v2 1/3] ARM: mmp: add pxa910 mmc resource   Eric Miao
• [PATCH 1/1] net/fec: do not pass NULL dev to DMA API   David Miller
• [PATCH 1/1] net/fec: do not pass NULL dev to DMA API   David Miller
• [PATCH 1/1] net/fec: do not pass NULL dev to DMA API   David Miller
• [PATCH 5/5] driver core: let dev_set_drvdata return int instead of void as it can fail   Michał Mirosław
• [PATCH 5/5] driver core: let dev_set_drvdata return int instead of void as it can fail   Michał Mirosław
• [PATCH 5/5] driver core: let dev_set_drvdata return int instead of void as it can fail   Michał Mirosław
• [PATCH v2] driver core: let dev_set_drvdata return int instead of void as it can fail   Michał Mirosław
• [PATCH v2] driver core: let dev_set_drvdata return int instead of void as it can fail   Michał Mirosław
• [PATCH] ARM: etm: wait for Progbit to go to 1 before programing ETM   Akinobu Mita
• [PATCH 1/3] bitops: add ifdef CONFIG_GENERIC_FIND_BIT_LE guard   Akinobu Mita
• [PATCH 2/3] arm: use asm-generic/bitops/le.h   Akinobu Mita
• [PATCH 1/3] bitops: add ifdef CONFIG_GENERIC_FIND_BIT_LE guard   Akinobu Mita
• [PATCH 1/6] arch: add #define for each of optimized find bitops   Akinobu Mita
• [PATCH 2/6] bitops: add #ifndef for each of find bitops   Akinobu Mita
• [PATCH 4/6] arm: use asm-generic/bitops/le.h   Akinobu Mita
• [PATCH v2 1/6] arch: add #define for each of optimized find bitops   Akinobu Mita
• [PATCH v2 2/6] bitops: add #ifndef for each of find bitops   Akinobu Mita
• [PATCH v2 4/6] arm: use asm-generic/bitops/le.h   Akinobu Mita
• [RFC][PATCH] bcmai: introduce AI driver   Rafał Miłecki
• [RFC][PATCH] bcmai: introduce AI driver   Rafał Miłecki
• [RFC][PATCH] bcmai: introduce AI driver   Rafał Miłecki
• [RFC][PATCH] bcmai: introduce AI driver   Rafał Miłecki
• [RFC][PATCH] bcmai: introduce AI driver   Rafał Miłecki
• [RFC][PATCH] bcmai: introduce AI driver   Rafał Miłecki
• [RFC][PATCH] bcmai: introduce AI driver   Rafał Miłecki
• [RFC][PATCH] bcmai: introduce AI driver   Rafał Miłecki
• [RFC][PATCH] bcmai: introduce AI driver   Rafał Miłecki
• [RFC][PATCH] bcmai: introduce AI driver   Rafał Miłecki
• [RFC][PATCH] bcmai: introduce AI driver   Rafał Miłecki
• [RFC][PATCH] bcmai: introduce AI driver   Rafał Miłecki
• [RFC][PATCH] bcmai: introduce AI driver   Rafał Miłecki
• [RFC][WAS:bcmai][PATCH V2] axi: add AXI bus driver   Rafał Miłecki
• [RFC][WAS:bcmai][PATCH V2] axi: add AXI bus driver   Rafał Miłecki
• [RFC][WAS:bcmai][PATCH V2] axi: add AXI bus driver   Rafał Miłecki
• [RFC][WAS:bcmai][PATCH V2] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH] bcmai: introduce AI driver   Rafał Miłecki
• [RFC][PATCH] bcmai: introduce AI driver   Rafał Miłecki
• [RFC][PATCH] bcmai: introduce AI driver   Rafał Miłecki
• [RFC][WAS:bcmai][PATCH V2] axi: add AXI bus driver   Rafał Miłecki
• [RFC][WAS:bcmai][PATCH V2] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH V3] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH V3] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH V3] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH V3] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH V3] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH V3] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH V3] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH V3] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH V3] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH V4] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH V4] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH V4] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH V4] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH V4] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH V4] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH V4] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH] axi: add AXI bus driver   Rafał Miłecki
• [RFC][PATCH V4] axi: add AXI bus driver   Rafał Miłecki
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Rafał Miłecki
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Rafał Miłecki
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Rafał Miłecki
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Rafał Miłecki
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Rafał Miłecki
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Rafał Miłecki
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Rafał Miłecki
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Rafał Miłecki
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Rafał Miłecki
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Rafał Miłecki
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Rafał Miłecki
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Rafał Miłecki
• [GIT PULL] omap changes for v2.6.39 merge window   Ingo Molnar
• [PATCH 00/34] Make kernel build deterministic   Ingo Molnar
• [PATCH 00/34] Make kernel build deterministic   Ingo Molnar
• [PATCH] leds: provide helper to register "leds-gpio" devices   Andrew Morton
• [PATCH] leds: provide helper to register "leds-gpio" devices   Andrew Morton
• [PATCH resend] rtc: Adding support for spear rtc   Andrew Morton
• [PATCH] ARM: hw_breakpoint: clear DBGVCR out of reset   Stepan Moskovchenko
• [PATCH] video: imx-fb: just depend on IMX_HAVE_PLATFORM_IMX_FB   Paul Mundt
• [PATCH] video: imx-fb: just depend on IMX_HAVE_PLATFORM_IMX_FB   Paul Mundt
• [PATCH/RFC 4/6] ARM: move SH-mobile runtime PM to arm/common for sharing with other platforms   Paul Mundt
• [PATCH/RFC 4/6] ARM: move SH-mobile runtime PM to arm/common for sharing with other platforms   Paul Mundt
• [PATCH 0/2] Common struct clk implementation, v14   Paul Mundt
• [PATCH] clkdev: add support to lookup for early platform device   Paul Mundt
• [PATCH] clkdev: add support to lookup for early platform device   Paul Mundt
• [PATCH] clkdev: add support to lookup for early platform device   Paul Mundt
• About enable L2 cache in Linux kernel   Sudeep K N
• [PATCH V2 1/2] mtd: nand: Allow NAND chip ids to be included standalone.   Murali Nalajala
• [PATCH 2/2] mtd: msm_nand: Add initial msm nand driver support.   Murali Nalajala
• [PATCH V2 2/2] mtd: msm_nand: Add initial msm nand driver support.   Murali Nalajala
• [PATCH 2/2] mtd: msm_nand: Add initial msm nand driver support.   Murali Nalajala
• [PATCH 2/2] mtd: msm_nand: Add initial msm nand driver support.   Murali Nalajala
• [PATCH V2 2/2] mtd: msm_nand: Add initial msm nand driver support.   Murali Nalajala
• [PATCH V2 2/2] mtd: msm_nand: Add initial msm nand driver support.   Murali Nalajala
• Architecture specific implementations for tickless kernel and deferrable timers   Vikram Narayanan
• Architecture specific implementations for tickless kernel and deferrable timers   Vikram Narayanan
• Architecture specific implementations for tickless kernel and deferrable timers   Vikram Narayanan
• Architecture specific implementations for tickless kernel and deferrable timers   Vikram Narayanan
• Architecture specific implementations for tickless kernel and deferrable timers   Vikram Narayanan
• Architecture specific implementations for tickless kernel and deferrable timers   Vikram Narayanan
• Architecture specific implementations for tickless kernel and deferrable timers   Vikram Narayanan
• Architecture specific implementations for tickless kernel and deferrable timers   Vikram Narayanan
• [PATCH 5/7] v4l: s5p-fimc: add pm_runtime support   Sylwester Nawrocki
• [PATCH] OMAP4: clockdomain: Follow recommended enable sequence   Rajendra Nayak
• [PATCH] OMAP4: clockdomain: Follow recommended enable sequence   Rajendra Nayak
• [PATCH 0/4] OMAP2+: Fix clockdomain state programming   Rajendra Nayak
• [PATCH 1/4] OMAP2+: clockdomain: Add an api to read idle mode   Rajendra Nayak
• [PATCH 2/4] OMAP2+: clockdomain: Add SoC support for clkdm_is_idle   Rajendra Nayak
• [PATCH 3/4] OMAP2+: PM: Initialise sleep_switch to a non-valid value   Rajendra Nayak
• [PATCH 4/4] OMAP2+: PM: idle clkdms only if already in idle   Rajendra Nayak
• [PATCH] OMAP4: clockdomain: Follow recommended enable sequence   Rajendra Nayak
• [PATCH 04/12] mm: alloc_contig_freed_pages() added   Michal Nazarewicz
• [PATCH 3/3] ARM: mmp: support mmc on pxa910 dkb board   Jun Nie
• [PATCH v2 0/3] ARM: mmp: support mmc on PXA910 DKB board   Jun Nie
• [PATCH v2 1/3] ARM: mmp: add pxa910 mmc resource   Jun Nie
• [PATCH v2 2/3] ARM: mmp: append mmc 2v8 regulator on dkb board   Jun Nie
• [PATCH v2 3/3] ARM: mmp: support mmc on pxa910 dkb board   Jun Nie
• [PATCH v2 1/3] ARM: mmp: add pxa910 mmc resource   Jun Nie
• [PATCH v2 00/12] mmc: use nonblock mmc requests to minimize latency   Sachin Nikam
• [PATCHv3] omap3: alsa-soc: Remove restrictive checks for cpu type   Jarkko Nikula
• [PATCH linux-omap-pm/pm-wip/cpufreq] OMAP2PLUS: cpufreq: Fix typo when attempting to set mpu_clk for OMAP4   Jarkko Nikula
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Ben Nizette
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Ben Nizette
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Ben Nizette
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Ben Nizette
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Ben Nizette
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Ben Nizette
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Ben Nizette
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Ben Nizette
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Ben Nizette
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Ben Nizette
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Ben Nizette
• [PATCH v18 08/13] davinci: eliminate use of IO_ADDRESS() on sysmod   Nori, Sekhar
• [PATCH 6/6] da8xx: enable the use of the ICPFUNC in i2c-davinci   Nori, Sekhar
• [PATCH 6/6] da8xx: enable the use of the ICPFUNC in i2c-davinci   Nori, Sekhar
• [PATCH 0/6] i2c-davinci gpio pulsed SCL recovery with ICPFUNC   Nori, Sekhar
• [PATCH 6/6] da8xx: enable the use of the ICPFUNC in i2c-davinci   Nori, Sekhar
• [PATCH] DA830: fix SPI1 base address   Nori, Sekhar
• [PATCH 1/3] DA8xx: kill duplicate #define DA8XX_GPIO_BASE   Nori, Sekhar
• [PATCH] ARM: Davinci: Fix I2C build errors   Nori, Sekhar
• [RFC PATCH v2] Consolidate SRAM support   Nori, Sekhar
• davinci: Use generic irq chip   Nori, Sekhar
• [GIT PULL] DaVinci fixes for 2.6.39-rc   Nori, Sekhar
• [PATCH v4 08/11] tty: add pruss SUART driver   Nori, Sekhar
• [patch 04/16] arm: davinci: Use clocksource based sched_clock   Nori, Sekhar
• [PATCH v4 08/11] tty: add pruss SUART driver   Nori, Sekhar
• [PATCH v4 08/11] tty: add pruss SUART driver   Nori, Sekhar
• [PATCH] msm: platsmp: actually read core count in get_core_count   Jeff Ohlstein
• Architecture specific implementations for tickless kernel and deferrable timers   Jeff Ohlstein
• [PATCH] Fixed gpio polarity of gpio USB-phy reset.   Samuel Ortiz
• [PATCH] Fixed gpio polarity of gpio USB-phy reset.   Samuel Ortiz
• [PM8921 MFD V5 0/6] pm8921 core and subdevices   Samuel Ortiz
• [PM8921 MFD V5 0/6] pm8921 core and subdevices   Samuel Ortiz
• [PM8921 MFD V5 0/6] pm8921 core and subdevices   Samuel Ortiz
• [GIT PULL] omap changes for v2.6.39 merge window   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] at91sam9263: merge all boards defconfig into only one   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] Add Board Support for Siemens L0 Board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] at91sam9263: merge all boards defconfig into only one   Jean-Christophe PLAGNIOL-VILLARD
• [PATCHv2 0/9] macb: add support for Cadence GEM   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] at91sam9261: rename at91sam9261ek to at91sam9261 defconfig   Jean-Christophe PLAGNIOL-VILLARD
• [PATCHv2 0/9] macb: add support for Cadence GEM   Jean-Christophe PLAGNIOL-VILLARD
• [PATCHv2 0/9] macb: add support for Cadence GEM   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] genalloc: add support to specify the physical address   Jean-Christophe PLAGNIOL-VILLARD
• [RFC 1/5]arch/arm/common/Makefile Remove unused config in the Makefile.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] fix build warnings on defconfigs   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] clkdev: add debugfs support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] clkdev: add debugfs support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] at91: remove MTD_NAND_ATMEL_BUSWIDTH_16 option   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] at91/board-eco920: remove at91_beeper ressource as no driver at91_beeper exist   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] atmel_serial: keep the platform_device unchanged   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] at91: remove MTD_NAND_ATMEL_BUSWIDTH_16 option   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] at91: remove MTD_NAND_ATMEL_BUSWIDTH_16 option   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3] at91: remove MTD_NAND_ATMEL_BUSWIDTH_16 option   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH] Consolidate SRAM support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] at91: 9260 and 9g20 add support of join SRAM Memory Mapping   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] at91: add generic allocator support for sram   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] atmel_serial: keep the platform_device unchanged   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] at91: merge board usb-a9260 and usb-a9263 together   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3] at91: remove MTD_NAND_ATMEL_BUSWIDTH_16 option   Jean-Christophe PLAGNIOL-VILLARD
• Status of arch/arm in linux-next   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: at91: AT91CAP9 has a macb device   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH v2] Consolidate SRAM support   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH v2] Consolidate SRAM support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: at91: AT91CAP9 has a macb device   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH 00/23] at91: Replace duplicate device initialisation code with common code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] at91: switch to CLKDEV_LOOKUP   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH 00/23] at91: Replace duplicate device initialisation code with common code   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH v2] Consolidate SRAM support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V2] genalloc: add support to specify the physical address   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH 02/23] at91: Make Ethernet device common   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] at91: switch to CLKDEV_LOOKUP   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] mach-at91: gsia18s board improvements and bug fixes   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] clkdev: add support to lookup for early platform device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 16/23] at91: Make LCD controller device common   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] at91: Add ARCH_ID and basic cpu macros definition for 5series chips family.   Jean-Christophe PLAGNIOL-VILLARD
• AT91 pull request   Jean-Christophe PLAGNIOL-VILLARD
• [PATCHv2 3/9] macb: unify at91 and avr32 platform data   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/14] at91: factorize soc init and switch to early platform   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/14] at91rm9200: introduce at91rm9200_set_type to specficy cpu package   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/14] at91: introduce commom AT91_BASE_SYS   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/14] at91: factorize at91 interrupts init to soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/14 v2] at91: merge board usb-a9260 and usb-a9263 together   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/14] at91: use structure to store the current soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/14 v3] at91: switch to CLKDEV_LOOKUP   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/14] at91: switch gpio to early platfrom device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/14] at91: move gpio to drivers/gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/14] at91: switch pit timer to early platform devices   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/14] at91: switch st timer to early platform devices   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/14] at91: move pit timer to drivers/clocksource   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 12/14] at91: move st timer to drivers/clocksource   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 13/14] at91: move register clocks to soc generic init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 14/14] at91: move clock subsystem init to soc generic init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/14] at91: switch gpio to early platfrom device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 14/14] at91: move clock subsystem init to soc generic init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/14] at91: use structure to store the current soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/14] at91: introduce commom AT91_BASE_SYS   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 14/14] at91: move clock subsystem init to soc generic init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 1/5] dmaengine: at_hdmac: modify way to use interrupts   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 02/23] at91: Make Ethernet device common   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 23/23] at91: Remove mAgic and ISI device code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/14] at91: use structure to store the current soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/14] at91: factorize at91 interrupts init to soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/14] at91: factorize at91 interrupts init to soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/14] at91: use structure to store the current soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/14] at91: use structure to store the current soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/14] at91: use structure to store the current soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] clkdev: add support to lookup for early platform device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] clkdev: add support to lookup for early platform device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] clkdev: add support to lookup for early platform device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/14] at91: factorize soc init and switch to early platform   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/14] at91: factorize soc init and switch to early platform   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] clkdev: add support to lookup for early platform device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] clkdev: add support to lookup for early platform device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] clkdev: add support to lookup for early platform device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] clkdev: add support to lookup for early platform device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/14] at91: factorize soc init and switch to early platform   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] clkdev: add support to lookup for early platform device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] clkdev: add support to lookup for early platform device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] clkdev: add support to lookup for early platform device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 23/23] at91: Remove mAgic and ISI device code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] clkdev: add support to lookup for early platform device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] clkdev: add support to lookup for early platform device   Jean-Christophe PLAGNIOL-VILLARD
• AT91: Convert to fasteoi IRQ handler, and remove ARM irq_finish   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] clkdev: add support to lookup for early platform device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/14] at91: switch pit timer to early platform devices   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/14] at91: use structure to store the current soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/14] at91: switch pit timer to early platform devices   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] at91: fix map_io init usage   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/14] at91: use structure to store the current soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/14] at91: switch pit timer to early platform devices   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/14] at91: switch pit timer to early platform devices   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/14] at91: use structure to store the current soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/14] at91: use structure to store the current soc   Jean-Christophe PLAGNIOL-VILLARD
• AT91: Convert RTC and RTT drivers to be independent of processor base-address   Jean-Christophe PLAGNIOL-VILLARD
• AT91: PIO base-address should be calculated by processor-specific code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/14] at91: switch pit timer to early platform devices   Jean-Christophe PLAGNIOL-VILLARD
• [PATCHv2] omap: rx51: Platform support for lp5523 led chip   Ameya Palande
• [PATCHv3] omap: rx51: Platform support for lp5523 led chip   Ameya Palande
• [PATCHv2] omap: rx51: Platform support for lp5523 led chip   Ameya Palande
• [PATCH v16 01/13] davinci vpbe: V4L2 display driver for DM644X SoC   Vladimir Pantelic
• [PATCH 1/2] video: add Samsung SoC MIPI-DSI controller driver.   Kyungmin Park
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Kyungmin Park
• [GIT PULL] Samsung fixes for 2.6.39-rc4   Kyungmin Park
• [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache   Kyungmin Park
• Cleanup Samsung stuff   Kyungmin Park
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Kyungmin Park
• [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache   Kyungmin Park
• [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache   Kyungmin Park
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Kyungmin Park
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Kyungmin Park
• [PATCH] pxa/hx4700: bq24022 regulator needs to be enabled   Paul Parsons
• [PATCH] pxa/hx4700: Add hx4700 LED support   Paul Parsons
• [PATCH] pxa/hx4700: Add hx4700 LED support   Paul Parsons
• [PATCH] pxa/hx4700: Add ASIC3 LED support   Paul Parsons
• A15 h/w virtulization support   Subash Patel
• [PATCH 1/4] TI816X: prcm: Add module and register offsets   Pedanekar, Hemant
• [PATCH 1/2] TI816X: Add minimal hwmod data   Hemant Pedanekar
• [PATCH 2/2] hwmods: Integrate TI816X hwmods   Hemant Pedanekar
• SDHCI pre-rootfs kernel oops problem...?   Nick Pelling
• Cleanup Samsung stuff   Nick Pelling
• [PATCH V4 2/4] MTD : add the common code for GPMI controller driver   Veli-Pekka Peltola
• [RFC][WAS:bcmai][PATCH V2] axi: add AXI bus driver   Joe Perches
• [RFC][WAS:bcmai][PATCH V2] axi: add AXI bus driver   Joe Perches
• [RFC][WAS:bcmai][PATCH V2] axi: add AXI bus driver   Joe Perches
• [RFC][PATCH V3] axi: add AXI bus driver   Joe Perches
• console_cpu_notify can cause scheduling BUG during CPU hotplug   Borislav Petkov
• console_cpu_notify can cause scheduling BUG during CPU hotplug   Borislav Petkov
• [PATCH 1/2] ARM: Differentiate SheevaPlugs and DockStars on the basis of the memory size.   Bernd Petrovitsch
• support for operating Kirkwood in big endian mode?   Mikael Pettersson
• support for operating Kirkwood in big endian mode?   Mikael Pettersson
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Zach Pfeffer
• [PATCH 5/5] OMAP3: cpuidle: change the power domains modes determination logic   Jean Pihet
• [PATCH v16 01/13] davinci vpbe: V4L2 display driver for DM644X SoC   Laurent Pinchart
• [PATCH v16 01/13] davinci vpbe: V4L2 display driver for DM644X SoC   Laurent Pinchart
• [PATCH] nand: Fix S3C NAND clock stop   Jiri Pinkava
• [PATCH] nand: Fix S3C NAND clock stop   Jiri Pinkava
• [PATCH] nand: Fix S3C NAND clock stop   Jiří Pinkava
• [GIT PULL] omap changes for v2.6.39 merge window   Nicolas Pitre
• [GIT PULL] omap changes for v2.6.39 merge window   Nicolas Pitre
• [GIT PULL] omap changes for v2.6.39 merge window   Nicolas Pitre
• [GIT PULL] omap changes for v2.6.39 merge window   Nicolas Pitre
• [PATCH 1/4] ARM: kprobes: Fix probing of conditionally executed instructions   Nicolas Pitre
• [PATCH] Moving Marvell Dove platform defaults to ARMv7   Nicolas Pitre
• RFC: Status of kernel/fiq.c   Nicolas Pitre
• [PATCH] Moving Marvell Dove platform defaults to ARMv7   Nicolas Pitre
• [RFC PATCH] ARM: fiq: Refactor {get,set}_fiq_regs() for Thumb-2   Nicolas Pitre
• [PATCH 2/2] ARM: Remove machine type dockstar (use sheevaplug instead)   Nicolas Pitre
• [PATCH 1/2] ARM: Differentiate SheevaPlugs and DockStars on the basis of the memory size.   Nicolas Pitre
• [PATCH 1/2] ARM: Differentiate SheevaPlugs and DockStars on the basis of the memory size.   Nicolas Pitre
• [PATCH 1/2] ARM: Differentiate SheevaPlugs and DockStars on the basis of the memory size.   Nicolas Pitre
• [PATCH] ARM: Allow for kernel command line concatenation   Nicolas Pitre
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Nicolas Pitre
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Nicolas Pitre
• [PATCH v2 0/4] ARM: kprobes: Fixes for ARM instruction emulation (part 1)   Nicolas Pitre
• [PATCH 0/5] ARM: kprobes: Fixes for ARM instruction emulation (part 2)   Nicolas Pitre
• [PATCH 1/2] ARM: the ADDR_NO_RANDOMIZE personality flag should be honored with mmap()   Nicolas Pitre
• [PATCH 2/2] ARM: fix personality flag propagation across an exec   Nicolas Pitre
• [PATCH 2/2] ARM: fix personality flag propagation across an exec   Nicolas Pitre
• [PATCH 1/2] arm: Replace CONFIG_HAS_TLS_REG with HWCAP_TLS and check for it on V6   Nicolas Pitre
• [PATCH 0/4] ARM: kprobes: Fixes for ARM instruction emulation (part 3)   Nicolas Pitre
• [PATCH 2/2] ARM: fix personality flag propagation across an exec   Nicolas Pitre
• [PATCH 2/2] ARM: fix personality flag propagation across an exec   Nicolas Pitre
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Nicolas Pitre
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Nicolas Pitre
• [PATCH] increase the use of CONFIG_VECTORS_BASE   Nicolas Pitre
• [PATCH 0/6] ARM: kprobes: Fixes for ARM instruction emulation (part 4)   Nicolas Pitre
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Nicolas Pitre
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Nicolas Pitre
• MT_HIGH_VECTOR mapping set read-only creating illegal access   Nicolas Pitre
• since when does ARM map the kernel memory in sections?   Nicolas Pitre
• since when does ARM map the kernel memory in sections?   Nicolas Pitre
• [PATCH 0/2] Common struct clk implementation, v14   Nicolas Pitre
• [PATCH 0/2] Common struct clk implementation, v14   Nicolas Pitre
• [PATCH 0/2] Common struct clk implementation, v14   Nicolas Pitre
• [PATCH 1/2] ARM: the ADDR_NO_RANDOMIZE personality flag should be honored with mmap()   Nicolas Pitre
• since when does ARM map the kernel memory in sections?   Nicolas Pitre
• [PATCH 0/5] ARM: kprobes: Fixes for ARM instruction emulation (part 5)   Nicolas Pitre
• MT_HIGH_VECTOR mapping set read-only creating illegal access   Nicolas Pitre
• MT_HIGH_VECTOR mapping set read-only creating illegal access   Nicolas Pitre
• [PATCH 0/3] fix some issues with the kernel decompressor   Nicolas Pitre
• [PATCH 1/3] ARM: zImage: no need to get the decompressed size from the filesystem   Nicolas Pitre
• [PATCH 2/3] ARM: compressed/misc.c: simplify decompress_kernel()   Nicolas Pitre
• [PATCH 3/3] ARM: zImage: fix issues with missing GOT entries for some global variables   Nicolas Pitre
• [PATCH 3/3] ARM: zImage: fix issues with missing GOT entries for some global variables   Nicolas Pitre
• [PATCH 3/3] ARM: zImage: fix issues with missing GOT entries for some global variables   Nicolas Pitre
• [PATCH 0/3] fix some issues with the kernel decompressor   Nicolas Pitre
• [PATCH 3/3] ARM: zImage: fix issues with missing GOT entries for some global variables   Nicolas Pitre
• [PATCH 3/3] ARM: zImage: fix issues with missing GOT entries for some global variables   Nicolas Pitre
• [PATCH 0/3] fix some issues with the kernel decompressor   Nicolas Pitre
• [PATCH] ARM: futex: add SMP futex support when !CPU_USE_DOMAINS   Nicolas Pitre
• [PATCH] ARM: Fix relocation if image end past uncompressed kernel end   Nicolas Pitre
• [PATCH] ARM: kprobes: Fix error in conditional instruction checking   Nicolas Pitre
• Error in head-common.S file while ARM Linux booting   Nicolas Pitre
• Status of arch/arm in linux-next   Nicolas Pitre
• [PATCH] ARM: Fix relocation if image end past uncompressed kernel end   Nicolas Pitre
• [PATCH] ARM: Fix relocation if image end past uncompressed kernel end   Nicolas Pitre
• [PATCH 2/3] ARM: zImage: don't ignore error returned from decompress()   Nicolas Pitre
• [PATCH 3/3] ARM: zImage: the page table memory must be considered before relocation   Nicolas Pitre
• [PATCH] ARM: Fix relocation if image end past uncompressed kernel end   Nicolas Pitre
• support for operating Kirkwood in big endian mode?   Nicolas Pitre
• [PATCH] ARM: Fix bad SP address after relocating kernel   Nicolas Pitre
• [PATCHv3] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Nicolas Pitre
• [PATCH 2/3] ARM: compressed/misc.c: simplify decompress_kernel()   Nicolas Pitre
• [PATCH 3/3] ARM: zImage: fix issues with missing GOT entries for some global variables   Nicolas Pitre
• [PATCH 3/3] ARM: zImage: fix issues with missing GOT entries for some global variables   Nicolas Pitre
• [alsa-devel] [PATCH] ASoC: prevent compilers from optimising pll calculation into __aeabi__uldivmod   Nicolas Pitre
• [PATCH] ARM: Fix relocation if image end past uncompressed kernel end   Nicolas Pitre
• [PATCH 0/5] ARM: kprobes: Fixes and additions for ARM instruction emulation (part 6)   Nicolas Pitre
• [PATCH 2/3] ARM: compressed/misc.c: simplify decompress_kernel()   Nicolas Pitre
• [PATCH 0/9] zImage fixes   Nicolas Pitre
• [PATCH 1/9] ARM: zImage: make sure the stack is 64-bit aligned   Nicolas Pitre
• [PATCH 2/9] ARM: zImage: Fix bad SP address after relocating kernel   Nicolas Pitre
• [PATCH 3/9] ARM: zImage: make sure not to relocate on top of the relocation code   Nicolas Pitre
• [PATCH 4/9] ARM: zImage: the page table memory must be considered before relocation   Nicolas Pitre
• [PATCH 5/9] ARM: zImage: no need to get the decompressed size from the filesystem   Nicolas Pitre
• [PATCH 6/9] ARM: zImage: simplify decompress_kernel()   Nicolas Pitre
• [PATCH 7/9] ARM: zImage: don't ignore error returned from decompress()   Nicolas Pitre
• [PATCH 8/9] ARM: zImage: remove the static qualifier from global data variables   Nicolas Pitre
• [PATCH 9/9] ARM: zImage: make sure no GOTOFF relocs are used with .bss symbols   Nicolas Pitre
• [PATCH] ARM: Include Makefile.boot only when it exists   Nicolas Pitre
• Git pull request: ARM kprobes fixes   Nicolas Pitre
• [PATCH] ARM: Include Makefile.boot only when it exists   Nicolas Pitre
• [PATCHv3] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Nicolas Pitre
• [PATCHv3] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Nicolas Pitre
• [PATCHv3] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Nicolas Pitre
• [PATCH] ARM: Include Makefile.boot only when it exists   Nicolas Pitre
• [PATCH 8/9] ARM: zImage: remove the static qualifier from global data variables   Nicolas Pitre
• Status of arch/arm in linux-next   Nicolas Pitre
• [PATCH v5 5/8] arm/dt: Drop irq_create_of_mapping() from arm code.   Nicolas Pitre
• [PATCH v5 8/8] dt: add documentation of ARM dt boot interface   Nicolas Pitre
• [PATCH] mach-at91: gsia18s board improvements and bug fixes   Igor Plyatov
• [PATCH] mach-at91: gsia18s board improvements and bug fixes   Igor Plyatov
• [PATCH v2] ide: at91_ide.c bugfix for high master clock   Igor Plyatov
• [PATCH] mach-at91: gsia18s board improvements and bug fixes   Igor Plyatov
• [PATCH 1/2] ux500: Adding support for u8500 Hsem functionality V2   Mathieu Poirier
• [PATCH 1/2] ux500: Adding support for u8500 Hsem functionality V2   Mathieu Poirier
• [PATCH 1/2] ux500: Adding support for u8500 Hsem functionality V2   Mathieu Poirier
• [PATCH] Moving Marvell Dove platform defaults to ARMv7   Konstantin Porotchkin
• [PATCH 1/2] Moving Marvell Dove platform defaults to ARMv7   Konstantin Porotchkin
• [PATCH 2/2] Sync Marvell Dove defconfig with latest kernel   Konstantin Porotchkin
• [PATCH 0/6] i2c-davinci gpio pulsed SCL recovery with ICPFUNC   Jon Povey
• [PATCH 0/6] i2c-davinci gpio pulsed SCL recovery with ICPFUNC   Jon Povey
• [PATCHv3] omap3: alsa-soc: Remove restrictive checks for cpu type   Sanjeev Premi
• [PATCH 2/2] OMAP3: PM: Do not rely on ROM code to restore CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL   Premi, Sanjeev
• [PATCH 2/2] OMAP3: PM: Do not rely on ROM code to restore CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL   Premi, Sanjeev
• [PATCH v2] leds: provide helper to register "leds-gpio" devices   Richard Purdie
• [PATCH v2] leds: provide helper to register "leds-gpio" devices   Richard Purdie
• [PATCH] rtc: max8925 crash since driver data not set before interr=   Philip Rakity
• [PATCH] rtc: max8925 crash since driver data not set before interrupt   Philip Rakity
• [PATCH] rtc: max8925 crash since driver data not set before interrupt   Philip Rakity
• [PATCH] plat-pxa: Enable ability to adjust SD/MMC clocks   Philip Rakity
• [PATCH] plat-pxa: add missing define for PERMANENT CARDS   Philip Rakity
• [PATCH] plat-pxa: Enable ability to adjust SD/MMC clocks   Philip Rakity
• [PATCH] plat-pxa: Enable ability to adjust SD/MMC clocks   Philip Rakity
• [PATCH v2] arm: mach-mmp: brownstone.c support multiple sd slots   Philip Rakity
• [PATCH] ARM: BUG() dies silently   Ramirez Luna, Omar
• [PATCH] ARM: BUG() dies silently   Ramirez Luna, Omar
• [PATCH v2] OMAP: iovmm: fix SW flags passed by user   Ramirez Luna, Omar
• [PATCH v4] ARM: Use generic BUG() handler   Ramirez Luna, Omar
• [PATCH] Fix infinite loop in ARM user perf_event backtrace code   Sonny Rao
• [PATCH] Fix infinite loop in ARM user perf_event backtrace code   Sonny Rao
• [PATCH 0/2] OMAP: convert boards that use SMSC911x to use gpmc-smsc911x   Mike Rapoport
• [PATCH 1/2] OMAP: gpmc-smsc911x: always set irq flags to IORESOURCE_IRQ_LOWLEVEL   Mike Rapoport
• [PATCH 2/2] OMAP: convert boards that use SMSC911x to use gpmc-smsc911x   Mike Rapoport
• [PATCH 1/2] arm: omap: fix bug with multiple smsc911x devices   Mike Rapoport
• [PATCH 0/4] omap: cleanup board files   Mike Rapoport
• [PATCH 1/4] omap: consolidate touch screen initialization among different boards   Mike Rapoport
• [PATCH 2/4] omap: use common initialization for PMIC i2c bus   Mike Rapoport
• [PATCH 3/4] omap: move detection of NAND CS to common-board-devices   Mike Rapoport
• [PATCH 4/4] omap: musb: introduce default baord config   Mike Rapoport
• [PATCH 4/4] omap: musb: introduce default baord config   Mike Rapoport
• [PATCH v2 4/4] omap: musb: introduce default board config   Mike Rapoport
• [PATCH] ARM: imx: fix usb related build failure for mach-vpr200   Marc Reilly
• [PATCH V2 2/2] MX53 Enable the AHCI SATA on MX53 LOCO   Zhu Richard-R65037
• [PATCH V3 1/2] AHCI Add the AHCI SATA feature on MX53 platforms   Zhu Richard-R65037
• [PATCH V3 2/2] MX53 Enable the AHCI SATA on MX53 LOCO   Zhu Richard-R65037
• [PATCH V4 2/2] MX53 Enable the AHCI SATA on MX53 LOCO   Zhu Richard-R65037
• [PATCH 2/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Roedel, Joerg
• [PATCH 2/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Roedel, Joerg
• [PATCH 2/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Roedel, Joerg
• [RFC] ARM DMA mapping TODO, v1   Joerg Roedel
• [RFC] ARM DMA mapping TODO, v1   Joerg Roedel
• [RFC] ARM DMA mapping TODO, v1   Joerg Roedel
• [RFC] ARM DMA mapping TODO, v1   Joerg Roedel
• [RFC] ARM DMA mapping TODO, v1   Joerg Roedel
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Joerg Roedel
• [PATCH] arm: prevent heap corruption in OABI semtimedop   Dan Rosenberg
• [PATCH] arm: nomadik: avoid assigning u32 to bool   Alessandro Rubini
• [PATCH] arm: nomadik: avoid assigning u32 to bool   Alessandro Rubini
• i.MX31 Early Kernel Messages   Russell, Richard S (G&N CoE)
• i.MX31 Early Kernel Messages   Russell, Richard S (G&N CoE)
• [RFC PATCH 01/15] perf: provide PMU when initing events   Mark Rutland
• [RFC PATCH 02/15] ARM: perf: only register a CPU PMU when present   Mark Rutland
• [PATCH] ARM: perf: remove erroneous check on active_events   Mark Rutland
• [RFC PATCH 05/15] ARM: perf: move active_events into struct arm_pmu   Mark Rutland
• [RFC PATCH 03/15] ARM: perf: clean up event group validation   Mark Rutland
• [RFC PATCH 09/15] ARM: perf: lock PMU registers per-CPU   Mark Rutland
• [RFC PATCH 11/15] ARM: perf: refactor event mapping   Mark Rutland
• [RFC PATCH 12/15] ARM: perf: add support for multiple PMUs   Mark Rutland
• [PATCH 4/6] ARM: mx3/mx31moboard: properly allocate memory for mx3-camera   Philippe Rétornaz
• [PATCH] Fixed gpio polarity of gpio USB-phy reset.   Steve Sakoman
• [PATCH V2 1/3] arm: lpc32xx: add tsc-device   Wolfram Sang
• [PATCH 1/3] ARM: mx5/mx53_loco: Add write-protect and card-detect for SD3   Wolfram Sang
• [PATCH v2] ARM: mx5/mx53_smd: Add esdhc support   Wolfram Sang
• i.MX27 SPI tx fifo underrun   Wolfram Sang
• [RFC 0/4] convert stmp into mxs and delete the obsolete platform   Wolfram Sang
• [RFC 1/4] arm: mach-mxs: add stmp378x-devb   Wolfram Sang
• [RFC 2/4] arm: mach-stmp37xx: remove mach   Wolfram Sang
• [RFC 3/4] arm: mach-stmp378x: remove mach   Wolfram Sang
• [RFC 4/4] arm: plat-stmp: remove plat   Wolfram Sang
• [RFC 0/4] convert stmp into mxs and delete the obsolete platform   Wolfram Sang
• [RFC 0/4] convert stmp into mxs and delete the obsolete platform   Wolfram Sang
• [RFC 0/4] convert stmp into mxs and delete the obsolete platform   Wolfram Sang
• [RFC 0/4] convert stmp into mxs and delete the obsolete platform   Wolfram Sang
• [RFC 0/4] convert stmp into mxs and delete the obsolete platform   Wolfram Sang
• [RFC 0/4] convert stmp into mxs and delete the obsolete platform   Wolfram Sang
• [PATCH 0/5] convert stmp into mxs and delete the then obsolete platform   Wolfram Sang
• [PATCH 1/5] arm: mach-mxs: add stmp378x-devb   Wolfram Sang
• [PATCH 2/5] arm: configs: add defconfig for mach-mxs   Wolfram Sang
• [PATCH 3/5] arm: mach-stmp37xx: remove mach   Wolfram Sang
• [PATCH 4/5] arm: mach-stmp378x: remove mach   Wolfram Sang
• [PATCH 5/5] arm: plat-stmp: remove plat   Wolfram Sang
• Isys-tech Xi3 supported?   JK Scheinberg
• ignore my previous post   JK Scheinberg
• i.MX27 SPI tx fifo underrun   Robert Schwebel
• [PATCH] V4L: mx3_camera: select VIDEOBUF2_DMA_CONTIG instead of VIDEOBUF_DMA_CONTIG   Robert Schwebel
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Matt Sealey
• Toradex Colibri Tegra 2 support   Nicolas Serafini
• [PATCH V3 2/6] dmaengine: add interrupt check for GPMI controller   Huang Shijie
• [PATCH V4 0/4] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH V4 1/4] ARM: add GPMI support for imx23/imx28   Huang Shijie
• [PATCH V4 2/4] MTD : add the common code for GPMI controller driver   Huang Shijie
• [PATCH V4 3/4] MTD: add support for imx23 and imx28   Huang Shijie
• [PATCH V4 4/4] MTD : add GPMI driver in the config and Makefile   Huang Shijie
• [PATCH V4 0/4] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH V4 0/4] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH V4 0/4] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH V4 2/4] MTD : add the common code for GPMI controller driver   Huang Shijie
• [PATCH v5 0/4] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH v5 1/4] ARM: add GPMI support for imx23/imx28   Huang Shijie
• [PATCH v5 2/4] MTD : add the common code for GPMI controller driver   Huang Shijie
• [PATCH v5 3/4] MTD : add support for imx23 and imx28   Huang Shijie
• [PATCH v5 4/4] MTD : add GPMI driver in the config and Makefile   Huang Shijie
• [PATCH v5 1/4] ARM: add GPMI support for imx23/imx28   Huang Shijie
• [PATCH v5 1/4] ARM: add GPMI support for imx23/imx28   Huang Shijie
• [PATCH v5 1/4] ARM: add GPMI support for imx23/imx28   Huang Shijie
• [PATCH v5 1/4] ARM: add GPMI support for imx23/imx28   Huang Shijie
• [PATCH v5 2/4] MTD : add the common code for GPMI controller driver   Huang Shijie
• [PATCH v5 2/4] MTD : add the common code for GPMI controller driver   Huang Shijie
• [PATCH v5 2/4] MTD : add the common code for GPMI controller driver   Huang Shijie
• [PATCH 1/2] ARM: mxs: add GPMI support for imx23/imx28   Huang Shijie
• [PATCH 2/2] ARM: mxs: add GPMI device for imx23/imx28   Huang Shijie
• [PATCH 1/2] ARM: mxs: add GPMI support for imx23/imx28   Huang Shijie
• [PATCH 2/2] ARM: mxs: add GPMI device for imx23/imx28   Huang Shijie
• [PATCH 1/2] ARM: mxs: add GPMI support for imx23/imx28   Huang Shijie
• [PATCH V2 1/3] ARM: mxs: add GPMI support for imx23/imx28   Huang Shijie
• [PATCH V2 2/3] ARM: mxs: add GPMI device for imx23   Huang Shijie
• [PATCH V2 3/3] ARM: mxs: add GPMI device for imx28   Huang Shijie
• [PATCH V2 1/3] ARM: mxs: add GPMI support for imx23/imx28   Huang Shijie
• [PATCH v6 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH v6 1/3] MTD : add the common code for GPMI controller driver   Huang Shijie
• [PATCH v6 2/3] MTD : add support for imx23 and imx28   Huang Shijie
• [PATCH v6 3/3] MTD : add GPMI driver in the config and Makefile   Huang Shijie
• [PATCH v6 1/3] MTD : add the common code for GPMI controller driver   Huang Shijie
• [PATCH V3 1/3] ARM: mxs: add GPMI support for imx23/imx28   Huang Shijie
• [PATCH V3 2/3] ARM: mxs: add GPMI device for imx23   Huang Shijie
• [PATCH V3 3/3] ARM: mxs: add GPMI device for imx28   Huang Shijie
• [PATCH v6 1/3] MTD : add the common code for GPMI controller driver   Huang Shijie
• [PATCH 3/3] ENGR00141558-9 MTD : add gpmi support for MX50   Huang Shijie
• [PATCH v6 1/3] MTD : add the common code for GPMI controller driver   Huang Shijie
• [PATCH 00/10] omap init_early changes for irq and timer init   Santosh Shilimkar
• [PATCH v2] ARM: GIC: Convert GIC library to use the IO relaxed operations   Santosh Shilimkar
• [PATCH 06/10] omap2+: Remove gptimer_wakekup for now   Santosh Shilimkar
• [pm-core][PATCH v3 01/21] OMAP4: PM: Add omap WakeupGen module support   Santosh Shilimkar
• [pm-core][PATCH v3 01/21] OMAP4: PM: Add omap WakeupGen module support   Santosh Shilimkar
• [PATCH 6/6] ARM: gic: use handle_fasteoi_irq for SPIs   Santosh Shilimkar
• RFC, GIC based smp_cross_call cleanup suggestion   Santosh Shilimkar
• RFC, GIC based smp_cross_call cleanup suggestion   Santosh Shilimkar
• RFC, GIC based smp_cross_call cleanup suggestion   Santosh Shilimkar
• [PATCH 6/6] ARM: gic: use handle_fasteoi_irq for SPIs   Santosh Shilimkar
• [PATCH] OMAP4: clockdomain: Follow recommended enable sequence   Santosh Shilimkar
• [PATCH] OMAP4: Move the privately used SMP boot functions to OMAP specific header.   Santosh Shilimkar
• RFC, GIC based smp_cross_call cleanup suggestion   Santosh Shilimkar
• RFC, GIC based smp_cross_call cleanup suggestion   Santosh Shilimkar
• [PATCH] OMAP: SRAM: Fix warning: format '%08lx' expects type 'long unsigned int'   Santosh Shilimkar
• [PATCH] OMAP4: SRAM: Fix warning: format '%08lx' expects type 'long unsigned int'   Santosh Shilimkar
• [PATCH] OMAP4: SRAM: Fix warning: format '%08lx' expects type 'long unsigned int'   Santosh Shilimkar
• [PATCH] OMAP2+: Fix 9 section mismatch(es) warnings from mach-omap2/built-in.o   Santosh Shilimkar
• [PATCH v2] ARM: GIC: Convert GIC library to use the IO relaxed operations   Santosh Shilimkar
• [GIT PULL] omap changes for v2.6.39 merge window   Santosh Shilimkar
• [PATCH 1/4] OMAP2+: clockdomain: Add an api to read idle mode   Santosh Shilimkar
• [GIT PULL] omap changes for v2.6.39 merge window   Santosh Shilimkar
• [GIT PULL] omap changes for v2.6.39 merge window   Santosh Shilimkar
• [Q] GIC : IRQ_TYPE_LEVEL_LOW interrupts   Santosh Shilimkar
• [PATCH linux-omap-pm/pm-wip/cpufreq] OMAP2PLUS: cpufreq: Fix typo when attempting to set mpu_clk for OMAP4   Santosh Shilimkar
• [PATCH 6/6] ARM: gic: use handle_fasteoi_irq for SPIs   Santosh Shilimkar
• [PATCH 6/6] ARM: gic: use handle_fasteoi_irq for SPIs   Santosh Shilimkar
• [PATCH] OMAP4: clockdomain: Follow recommended enable sequence   Santosh Shilimkar
• [PATCH] OMAP4: SRAM: Fix warning: format '%08lx' expects type 'long unsigned int'   Santosh Shilimkar
• console_cpu_notify can cause scheduling BUG during CPU hotplug   Santosh Shilimkar
• [PATCH] ARM: cache-l2x0: fix wrong print of AUX_CTRL register   Santosh Shilimkar
• [PATCH] ARM: cache-l2x0: fix wrong print of AUX_CTRL register   Santosh Shilimkar
• [PATCH] ARM: cache-l2x0: fix wrong print of AUX_CTRL register   Santosh Shilimkar
• [PATCH V3] ARM: GIC: Convert GIC library to use the IO relaxed operations   Santosh Shilimkar
• [RFC PATCH 03/12] ARM: omap4: use remapped PPI interrupts for local timer   Santosh Shilimkar
• [PATCH 1/5] OMAP3 cpuidle: remove useless SDP specific timings   Santosh Shilimkar
• [PATCH 3/5] OMAP3: cpuidle: re-organize the C-states data   Santosh Shilimkar
• [PATCH 5/5] OMAP3: cpuidle: change the power domains modes determination logic   Santosh Shilimkar
• [PATCH 1/4] ARM: S5P: Add usb ehci device   Joonyoung Shim
• [PATCH 2/4] ARM: EXYNOS4: Add usb host phy control   Joonyoung Shim
• [PATCH 3/4] ARM: EXYNOS4: Add usb ehci device to the NURI board   Joonyoung Shim
• [PATCH 4/4] USB: Add initial S5P EHCI driver   Joonyoung Shim
• [PATCH 0/4] Support Samsung S5P EHCI device and driver   Joonyoung Shim
• [PATCH 4/4 RESEND] USB: Add initial S5P EHCI driver   Joonyoung Shim
• [PATCH 3/4] ARM: EXYNOS4: Add usb ehci device to the NURI board   Joonyoung Shim
• [PATCH] ARM: S3C64XX: Remove gpio-bank-X header files   Joonyoung Shim
• [PATCH] ARM: S3C64XX: Remove gpio-bank-X header files   Joonyoung Shim
• [PATCH v2] ARM: S3C64XX: Remove gpio-bank-X header files   Joonyoung Shim
• [PATCH 2/7] mioa701: drop udc_is_connected   Sergei Shtylyov
• [PATCH 6/7] pxa25x: drop handling of udc_is_connected   Sergei Shtylyov
• [PATCH v4 1/4] davinci: da8xx: add spi resources and registration routine   Sergei Shtylyov
• [PATCH] DA830: fix SPI1 base address   Sergei Shtylyov
• [PATCH 1/3] DA8xx: kill duplicate #define DA8XX_GPIO_BASE   Sergei Shtylyov
• [PATCH 2/3] DA8xx: kill duplicate #define DA8XX_PLL1_BASE   Sergei Shtylyov
• [PATCH 3/3] DA8xx: move base address #define's to their proper place   Sergei Shtylyov
• [PATCH] ARM: Tegra: Harmony: Fix conflicting GPIO numbering   Sergei Shtylyov
• [PATCH V4 2/2] MX53 Enable the AHCI SATA on MX53 LOCO   Sergei Shtylyov
• [PATCH 4/6] ARM: kprobes: Fix emulation of SXTB16, SXTB, SXTH, UXTB16, UXTB and UXTH instructions   Sergei Shtylyov
• [PATCH 5/6] ARM: kprobes: Fix emulation of SMUAD, SMUSD and SMMUL instructions   Sergei Shtylyov
• [RFC PATCH 1/5] gemini: convert to basic-mmio-gpio   Sergei Shtylyov
• [PATCH 2.6.39 v2] V4L: videobuf-dma-contig: fix mmap_mapper broken on ARM   Sergei Shtylyov
• [PATCH 2.6.39 v2] V4L: videobuf-dma-contig: fix mmap_mapper broken on ARM   Sergei Shtylyov
• [PATCH] Fixed gpio polarity of gpio USB-phy reset.   Sergei Shtylyov
• [PATCH 2.6.39 v2] V4L: videobuf-dma-contig: fix mmap_mapper broken on ARM   Sergei Shtylyov
• [PATCH 2.6.39 v2] V4L: videobuf-dma-contig: fix mmap_mapper broken on ARM   Sergei Shtylyov
• [PATCH] OMAP: Added recalculation of clock rate in 'clk_set_rate'   Sergei Shtylyov
• [PATCH v4 11/11] da850: pruss CAN board specific additions.   Sergei Shtylyov
• [PATCH v4 03/11] da850: pruss platform specific additions.   Sergei Shtylyov
• [PATCH v4 03/11] da850: pruss platform specific additions.   Sergei Shtylyov
• [PATCH] echi: remove structure packing from ehci_def   Sergei Shtylyov
• [PATCH 1/2] AM35xx-Craneboard: USB EHCI: Fix USB ECHI PHY reset   Sergei Shtylyov
• [PATCH 2/2] AM35xx-Craneboard:Display: Add DVI and TV Support   Sergei Shtylyov
• [PATCH] arm: plat-mxc: Add missing lockdep annotation   Baruch Siach
• [PATCH] video: imx-fb: just depend on IMX_HAVE_PLATFORM_IMX_FB   Baruch Siach
• [PATCH] video: imx-fb: just depend on IMX_HAVE_PLATFORM_IMX_FB   Baruch Siach
• i.MX31 Early Kernel Messages   Baruch Siach
• [PATCH] Enhanced ethtool API of CPSW driver in order to be able to address even more than one PHY.   Baruch Siach
• [PATCH] Fix for missed MII interrupts and MDIO timeouts when FEC is in STOP   Baruch Siach
• [PATCH] Fix for missed MII interrupts and MDIO timeouts when FEC is in STOP   Baruch Siach
• Runtime CPU features detection on ARM (/proc/cpuinfo vs. /proc/self/auxv)   Siarhei Siamashka
• AT91: Convert to fasteoi IRQ handler, and remove ARM irq_finish   Sebastian Andrzej Siewior
• AT91: Convert to fasteoi IRQ handler, and remove ARM irq_finish   Sebastian Andrzej Siewior
• AT91: Convert to fasteoi IRQ handler, and remove ARM irq_finish   Sebastian Andrzej Siewior
• arm: pmu: support pmu/perf on OMAP4 - booting problem on pandaboard   Avik Sil
• arm: pmu: support pmu/perf on OMAP4 - booting problem on pandaboard   Avik Sil
• arm: pmu: support pmu/perf on OMAP4 - booting problem on pandaboard   Avik Sil
• arm: pmu: support pmu/perf on OMAP4 - booting problem on pandaboard   Avik Sil
• arm: pmu: support pmu/perf on OMAP4 - booting problem on pandaboard   Avik Sil
• arm: pmu: support pmu/perf on OMAP4 - booting problem on pandaboard   Avik Sil
• [PATCH 1/3] ARM: Xilinx: add timer and on chip memory support for SMP   Michal Simek
• V4L/ARM: videobuf-dma-contig no longer works on my ARM machine   Jiri Slaby
• [REVERT] Re: V4L: videobuf-dma-contig: fix mmap_mapper broken on ARM   Jiri Slaby
• [GIT PULL] omap changes for v2.6.39 merge window   Barry Song
• [PATCH] arm:pm: save the vfp state of last scheduled-out proceed while suspending   Barry Song
• [alsa-devel] [PATCH] ASoC: prevent compilers from optimising pll calculation into __aeabi__uldivmod   Barry Song
• [alsa-devel] [PATCH] ASoC: prevent compilers from optimising pll calculation into __aeabi__uldivmod   Barry Song
• [PATCH] arm:pm: save the vfp state of last scheduled-out proceed while suspending   Barry Song
• [PATCH] arm:pm: save the vfp state of last scheduled-out proceed while suspending   Barry Song
• [RFC][PATCH] bcmai: introduce AI driver   Arend van Spriel
• [RFC][PATCH] bcmai: introduce AI driver   Arend van Spriel
• [RFC][PATCH] bcmai: introduce AI driver   Arend van Spriel
• [RFC][PATCH] bcmai: introduce AI driver   Arend van Spriel
• [RFC][PATCH] bcmai: introduce AI driver   Arend van Spriel
• [RFC][PATCH] bcmai: introduce AI driver   Arend van Spriel
• [RFC][PATCH] bcmai: introduce AI driver   Arend van Spriel
• [RFC][PATCH] bcmai: introduce AI driver   Arend van Spriel
• [RFC][WAS:bcmai][PATCH V2] axi: add AXI bus driver   Arend van Spriel
• [RFC][PATCH] axi: add AXI bus driver   Arend van Spriel
• [RFC][PATCH] axi: add AXI bus driver   Arend van Spriel
• [RFC][PATCH] axi: add AXI bus driver   Arend van Spriel
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Arend van Spriel
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Arend van Spriel
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Arend van Spriel
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Arend van Spriel
• [PATCH] drivers: brcmaxi: provide amba axi functionality in separate module   Arend van Spriel
• [PATCH] drivers: brcmaxi: provide amba axi functionality in separate module   Arend van Spriel
• [PATCH] drivers: brcmaxi: provide amba axi functionality in separate module   Arend van Spriel
• [RFC][WAS:bcmai][PATCH V2] axi: add AXI bus driver   Gábor Stefanik
• [RFC][PATCH V4] axi: add AXI bus driver   Gábor Stefanik
• [PATCH] plat-mxc: Provide irq_chip name for GPIO IRQs   Alexander Stein
• [PATCH v4 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver   Alan Stern
• [PATCH v4 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver   Alan Stern
• ARM unaligned MMIO access with attribute((packed))   Alan Stern
• ARM unaligned MMIO access with attribute((packed))   Alan Stern
• ARM unaligned MMIO access with attribute((packed))   Alan Stern
• [PATCH] arm: omap2: enable smc instruction for sleep34xx   Alexander Stevens
• Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Peter Stuge
• [PATCH RESEND 0/4] USB: gadget: Add Samsung S3C24xx USB HS controller driver   Heiko Stübner
• [PATCH RESEND v2 0/4] USB: gadget: Add Samsung S3C24xx USB HS controller driver   Heiko Stübner
• [PATCH 1/4] ARM: S3C2416: Add USB Phy register definitions   Heiko Stübner
• [PATCH 2/4] ARM: S3C24XX: Add plaform device definition for USB High-Speed gadget controller.   Heiko Stübner
• [PATCH v4 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver   Heiko Stübner
• [PATCH 4/4] ARM: S3C2416: Add support for USB 2.0 High-Speed gadget controller   Heiko Stübner
• [PATCH v4 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver   Heiko Stübner
• [PATCH v4 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver   Heiko Stübner
• [PATCH v4 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver   Heiko Stübner
• S3C2416, S3C2443 HS-SPI driver?   Heiko Stübner
• ARM, AF_PACKET: caching problems on Marvell Kirkwood   Phil Sutter
• [PATCH v2 1/2] ARM: mxc: Introduce imx_add_gpio_leds   H Hartley Sweeten
• [PATCH v2 1/2] ARM: mxc: Introduce imx_add_gpio_leds   H Hartley Sweeten
• [PATCH v2 1/2] ARM: mxc: Introduce imx_add_gpio_leds   H Hartley Sweeten
• [PATCH] leds: provide helper to register "leds-gpio" devices   H Hartley Sweeten
• genirq: Implement a generic interrupt chip   H Hartley Sweeten
• vic: Use generic interrupt chip   H Hartley Sweeten
• [patch 27/29] arm: Cleanup the irq namespace   H Hartley Sweeten
• [patch 21/23] arm: Cleanup the irq namespace   H Hartley Sweeten
• genirq: Implement a generic interrupt chip   H Hartley Sweeten
• [RFC PATCH 02/23] at91: Make Ethernet device common   H Hartley Sweeten
• [RFC PATCH 11/23] at91: Make watchdog device common   H Hartley Sweeten
• [RFC PATCH 00/23] at91: Replace duplicate device initialisation code with common code   H Hartley Sweeten
• [RFC PATCH 02/23] at91: Make Ethernet device common   H Hartley Sweeten
• Question: add convenience macros to create struct resource data?   H Hartley Sweeten
• [PATCH v2 00/23] at91: Replace duplicate device initialisation code with   H Hartley Sweeten
• [PATCH v2 23/23] at91: Remove mAgic and ISI device code   H Hartley Sweeten
• [PATCH v2 20/23] at91: Make high speed USB gadget device common   H Hartley Sweeten
• [PATCH v2 20/23] at91: Make high speed USB gadget device common   H Hartley Sweeten
• [PATCH v2 02/23] at91: Make Ethernet device common   H Hartley Sweeten
• [PATCH v2 02/23] at91: Make Ethernet device common   H Hartley Sweeten
• [PATCH 03/14] at91: factorize at91 interrupts init to soc   H Hartley Sweeten
• [RFC] ep93xx: switch gpio to early platform device   H Hartley Sweeten
• [RFC] ep93xx: switch gpio to early platform device   H Hartley Sweeten
• [PATCH 02/10] mach-u300: rewrite gpio driver, move to drivers/gpio   H Hartley Sweeten
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   H Hartley Sweeten
• [PATCH 02/10] mach-u300: rewrite gpio driver, move to drivers/gpio   H Hartley Sweeten
• [PATCH v2 02/23] at91: Make Ethernet device common   H Hartley Sweeten
• [PATCH v2 02/23] at91: Make Ethernet device common   H Hartley Sweeten
• [PATCH v3 00/23] Create common framework for AT91 device initialisation   H Hartley Sweeten
• [PATCH] ARM: Include Makefile.boot only when it exists   Brian Swetland
• [PATCH 04/12] mm: alloc_contig_freed_pages() added   Marek Szyprowski
• [RFC/PATCH v2 0/7] Samsung IOMMU videobuf2 allocator and s5p-fimc update   Marek Szyprowski
• [PATCH 1/7] ARM: EXYNOS4: power domains: fixes and code cleanup   Marek Szyprowski
• [PATCH 2/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Marek Szyprowski
• [PATCH 3/7] v4l: videobuf2: dma-sg: move some generic functions to memops   Marek Szyprowski
• [PATCH 4/7] v4l: videobuf2: add IOMMU based DMA memory allocator   Marek Szyprowski
• [PATCH 5/7] v4l: s5p-fimc: add pm_runtime support   Marek Szyprowski
• [PATCH 6/7] v4l: s5p-fimc: Add support for vb2-dma-iommu allocator   Marek Szyprowski
• [PATCH 7/7] ARM: EXYNOS4: enable FIMC on Universal_C210   Marek Szyprowski
• [PATCH 5/7] v4l: s5p-fimc: add pm_runtime support   Marek Szyprowski
• [RFC/PATCH v3 0/7] Samsung IOMMU videobuf2 allocator and s5p-fimc update   Marek Szyprowski
• [PATCH 1/7] ARM: EXYNOS4: power domains: fixes and code cleanup   Marek Szyprowski
• [PATCH 2/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Marek Szyprowski
• [PATCH 3/7] v4l: videobuf2: dma-sg: move some generic functions to memops   Marek Szyprowski
• [PATCH 4/7] v4l: videobuf2: add IOMMU based DMA memory allocator   Marek Szyprowski
• [PATCH 5/7] v4l: s5p-fimc: add pm_runtime support   Marek Szyprowski
• [PATCH 6/7] v4l: s5p-fimc: Add support for vb2-dma-iommu allocator   Marek Szyprowski
• [PATCH 7/7] ARM: EXYNOS4: enable FIMC on Universal_C210   Marek Szyprowski
• [RFC/PATCH v3 0/7] Samsung IOMMU videobuf2 allocator and s5p-fimc update   Marek Szyprowski
• [PATCH 2/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Marek Szyprowski
• [PATCH 4/7] v4l: videobuf2: add IOMMU based DMA memory allocator   Marek Szyprowski
• [PATCH 2/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Marek Szyprowski
• [PATCH 2/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Marek Szyprowski
• [PATCH 2/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Marek Szyprowski
• [PATCH 2/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Marek Szyprowski
• [PATCH 2/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Marek Szyprowski
• [PATCH 2/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Marek Szyprowski
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Marek Szyprowski
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Marek Szyprowski
• [PATCH 0/4] ARM: kprobes: Fixes for ARM instruction emulation   Tixy
• [PATCH 1/4] ARM: kprobes: Fix probing of conditionally executed instructions   Tixy
• [PATCH 2/4] ARM: kprobes: Remove redundant condition checks from simulation routines   Tixy
• [PATCH 3/4] ARM: kprobes: Fix emulation of CMP, CMN, TST and TEQ instructions.   Tixy
• [PATCH 4/4] ARM: kprobes: Fix emulation of data processing (immediate) instructions   Tixy
• [PATCH 1/4] ARM: kprobes: Fix probing of conditionally executed instructions   Tixy
• [PATCH v2 0/4] ARM: kprobes: Fixes for ARM instruction emulation (part 1)   Tixy
• [PATCH v2 1/4] ARM: kprobes: Fix probing of conditionally executed instructions   Tixy
• [PATCH v2 2/4] ARM: kprobes: Remove redundant condition checks from simulation routines   Tixy
• [PATCH v2 3/4] ARM: kprobes: Fix emulation of CMP, CMN, TST and TEQ instructions.   Tixy
• [PATCH v2 4/4] ARM: kprobes: Fix emulation of Data-processing (immediate) instructions   Tixy
• [PATCH 0/5] ARM: kprobes: Fixes for ARM instruction emulation (part 2)   Tixy
• [PATCH 1/5] ARM: kprobes: Reject probing MRS instructions which read SPSR   Tixy
• [PATCH 2/5] ARM: kprobes: Fix emulation of MRS instruction   Tixy
• [PATCH 3/5] ARM: kprobes: Reject probing of instructions which write to PC unpredictably.   Tixy
• [PATCH 4/5] ARM: kprobes: Fix error in comment   Tixy
• [PATCH 5/5] ARM: kprobes: Reject probing of undefined multiply instructions   Tixy
• [PATCH 0/4] ARM: kprobes: Fixes for ARM instruction emulation (part 3)   Tixy
• [PATCH 1/4] ARM: kprobes: Reject probing of STREX and LDREX instructions   Tixy
• [PATCH 2/4] ARM: kprobes: Fix emulation of LDRH, STRH, LDRSB and LDRSH instructions   Tixy
• [PATCH 3/4] ARM: kprobes: Reject probing of LDR/STR instructions which update PC unpredictably   Tixy
• [PATCH 4/4] ARM: kprobes: Fix emulation of LDRD and STRD instructions   Tixy
• [PATCH 0/6] ARM: kprobes: Fixes for ARM instruction emulation (part 4)   Tixy
• [PATCH 1/6] ARM: kprobes: Reject probing of LDRB instructions which load PC   Tixy
• [PATCH 2/6] ARM: kprobes: Add emulation of RBIT instruction   Tixy
• [PATCH 3/6] ARM: kprobes: Reject probing of undefined media instructions   Tixy
• [PATCH 4/6] ARM: kprobes: Fix emulation of SXTB16, SXTB, SXTH, UXTB16, UXTB and UXTH instructions   Tixy
• [PATCH 5/6] ARM: kprobes: Fix emulation of SMUAD, SMUSD and SMMUL instructions   Tixy
• [PATCH 6/6] ARM: kprobes: Fix emulation of USAD8 instructions   Tixy
• [PATCH 4/6] ARM: kprobes: Fix emulation of SXTB16, SXTB, SXTH, UXTB16, UXTB and UXTH instructions   Tixy
• [PATCH 0/5] ARM: kprobes: Fixes for ARM instruction emulation (part 5)   Tixy
• [PATCH 1/5] ARM: kprobes: Reject probing of all coprocessor instructions   Tixy
• [PATCH 2/5] ARM: kprobes: Consolidate stub decoding functions   Tixy
• [PATCH 3/5] ARM: kprobes: Reject probing of SETEND instructions   Tixy
• [PATCH 4/5] ARM: kprobes: Fix emulation of PLD instructions   Tixy
• [PATCH 5/5] ARM: kprobes: Remove redundant code in space_1111   Tixy
• [PATCH 0/5] ARM: kprobes: Fixes and additions for ARM instruction emulation (part 6)   Tixy
• [PATCH 1/5] ARM: kprobes: Reject probing of undefined data processing instructions   Tixy
• [PATCH 2/5] ARM: kprobes: Add emulation of MOVW and MOVT instructions   Tixy
• [PATCH 3/5] ARM: kprobes: Add emulation of SBFX, UBFX, BFI and BFC instructions   Tixy
• [PATCH 4/5] ARM: kprobes: Add emulation of hint instructions like NOP and WFI   Tixy
• [PATCH 5/5] ARM: kprobes: Tidy-up kprobes-decode.c   Tixy
• [PATCH] ARM: kprobes: Fix error in conditional instruction checking   Tixy
• [PATCH 0/5] ARM: kprobes: Fixes and additions for ARM instruction emulation (part 6)   Tixy
• [PATCH 0/5] ARM: kprobes: Fixes and additions for ARM instruction emulation (part 6)   Tixy
• [RFC] ARM DMA mapping TODO, v1   FUJITA Tomonori
• [RFC] ARM DMA mapping TODO, v1   FUJITA Tomonori
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   FUJITA Tomonori
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   FUJITA Tomonori
• [PATCH v2 03/12] mmc: mmc_test: add test for none blocking transfers   Lin Tony-B19295
• WARNING: at mm/page_alloc.c   Dmitry Torokhov
• [GIT PULL] omap changes for v2.6.39 merge window   Linus Torvalds
• Status of arch/arm in linux-next   Linus Torvalds
• Status of arch/arm in linux-next   Linus Torvalds
• [PATCH] Add Board Support for Siemens L0 Board   Manuel Traut
• [PATCH] Add Board Support for Siemens L1 Board   Manuel Traut
• Common clock and dvfs   Turquette, Mike
• about uclinux for armnommu dma allocate issue   Greg Ungerer
• [PATCH 09/14] at91: switch pit timer to early platform devices   Greg Ungerer
• [PATCH] Trivial: ARM: pxa168: Bug fix - correct UART DMA channels   Tanmay Upadhyay
• [RFC PATCH 00/18] OMAP: GPIO: cleanup GPIO driver   Charulatha V
• [RFC PATCH 01/18] OMAP1: GPIO: Fix mpuio_init() call   Charulatha V
• [RFC PATCH 02/18] OMAP: GPIO: remove get_gpio_bank()   Charulatha V
• [RFC PATCH 03/18] OMAP: GPIO: Move gpio_get_index() to mach-omap   Charulatha V
• [RFC PATCH 04/18] OMAP: GPIO: Move gpio_valid() to SoC specific files   Charulatha V
• [RFC PATCH 05/18] OMAP: GPIO: cleanup datain,dataout,set dir funcs   Charulatha V
• [RFC PATCH 06/18] OMAP: GPIO: cleanup set trigger func   Charulatha V
• [RFC PATCH 07/18] OMAP: GPIO: cleanup set/get IRQ, clr irqstatus funcs   Charulatha V
• [RFC PATCH 08/18] OMAP: GPIO: req/free: Remove reg offset macros usage   Charulatha V
• [RFC PATCH 09/18] OMAP: GPIO: cleanup gpio_irq_handler   Charulatha V
• [RFC PATCH 10/18] OMAP: GPIO: cleanup set wakeup/suspend/resume funcs   Charulatha V
• [RFC PATCH 11/18] OMAP: GPIO: Remove dependency on gpio_bank_count   Charulatha V
• [RFC PATCH 12/18] OMAP: GPIO: cleanup set_debounce, idle/resume_after_idle   Charulatha V
• [RFC PATCH 13/18] OMAP: GPIO: cleanup save/restore context   Charulatha V
• [RFC PATCH 14/18] OMAP: GPIO: Remove CONFIG_ARCH_OMAP16XX/OMAP2+ defines   Charulatha V
• [RFC PATCH 15/18] OMAP: GPIO: cleanup gpio_show_rev   Charulatha V
• [RFC PATCH 16/18] OMAP: GPIO: move omap_gpio_mod_init to mach-omap   Charulatha V
• [RFC PATCH 17/18] OMAP: GPIO: use dev_err* instead of printk   Charulatha V
• [RFC PATCH 18/18] OMAP: GPIO: Remove usage of bank method   Charulatha V
• [PATCH 0/2] Couple of fixes regarding CM_AUTOIDLE_PLL register   Eduardo Valentin
• [PATCH 1/2] OMAP2+: PM: Fix the saving of CM_AUTOIDLE_PLL register on scratchpad area   Eduardo Valentin
• [PATCH 2/2] OMAP3: PM: Do not rely on ROM code to restore CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL   Eduardo Valentin
• [PATCH 2/2] OMAP3: PM: Do not rely on ROM code to restore CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL   Eduardo Valentin
• [PATCH 2/2] OMAP3: PM: Do not rely on ROM code to restore CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL   Eduardo Valentin
• [RFC PATCH] Consolidate SRAM support   Eduardo Valentin
• [GIT PULL] omap changes for v2.6.39 merge window   Tomi Valkeinen
• [GIT PULL] omap changes for v2.6.39 merge window   Tomi Valkeinen
• [GIT PULL] omap changes for v2.6.39 merge window   Tomi Valkeinen
• [RFC PATCH] Consolidate SRAM support   Tomi Valkeinen
• [PATCH] OMAP: Remove reserve_sram calls to omapfb   Tomi Valkeinen
• [RFC PATCH] Consolidate SRAM support   Tomi Valkeinen
• [v2 0/7] OMAP: GPIO: Use PM runtime framework   Varadarajan, Charulatha
• [PATCH 1/7] OMAP: GPIO: Make gpio_context part of gpio_bank structure   Varadarajan, Charulatha
• [PATCH 2/7] OMAP: GPIO: Use flag to identify wkup dmn GPIO   Varadarajan, Charulatha
• [PATCH 3/7] OMAP4: GPIO: Save/restore context   Varadarajan, Charulatha
• [PATCH 4/7] OMAP: GPIO: handle save/restore ctx in GPIO driver   Varadarajan, Charulatha
• [PATCH 5/7] OMAP2+: GPIO: make workaround_enabled bank specific   Varadarajan, Charulatha
• [PATCH 6/7] OMAP: GPIO: Cleanup prepare_for_idle/resume   Varadarajan, Charulatha
• [PATCH 7/7] OMAP: GPIO: use PM runtime framework   Varadarajan, Charulatha
• [PATCH 02/15] OMAP: GPIO: remove MPUIO handling from _clear_gpio_irqbank()   Varadarajan, Charulatha
• [RFC PATCH 00/18] OMAP: GPIO: cleanup GPIO driver   Varadarajan, Charulatha
• [PATCH 15/15] OMAP: GPIO: cleanup show revision, remove cpu_is checks, display only once   Varadarajan, Charulatha
• [PATCH 11/15] OMAP: GPIO: convert MPUIO IRQ over to generic irq_chip   Varadarajan, Charulatha
• [PATCH 10/15] OMAP: GPIO: conslidate enable/disable of GPIO IRQs, remove ifdefs   Varadarajan, Charulatha
• [PATCH 09/15] OMAP: GPIO: consolidate IRQ status handling, remove #ifdefs   Varadarajan, Charulatha
• [PATCH 13/15] OMAP: GPIO: cleanup _set_gpio_wakeup(), remove ifdefs   Varadarajan, Charulatha
• [PATCH 1/3] sound/spitz: Properly handle MIC GPIO   Marek Vasut
• [PATCH 2/3] Use gpio_set_value_cansleep() in corgi_lcd.c   Marek Vasut
• [PATCH 3/3] PXA: Reorganise pxa2xx_base init() function   Marek Vasut
• [PATCH 2/3] Use gpio_set_value_cansleep() in corgi_lcd.c   Marek Vasut
• [PATCH 2/3] Use gpio_set_value_cansleep() in corgi_lcd.c   Marek Vasut
• 2.6.39-rc2 on zaurus: does not build, does not boot   Marek Vasut
• [PATCH] pxa270 rtc wakeup event fix   Marek Vasut
• [PATCH][KERNEL] Add support for CPLD regs and CF cards in kernel 2.6.38   Marek Vasut
• [PATCH] PXA: Use dev_pm_ops in z2_battery   Marek Vasut
• [PATCH RFC] ARM: PXA27x: CPUFREQ: Don't use fastbus mode   Marek Vasut
• [PATCH] pxa270 rtc wakeup event fix   Marek Vasut
• zaurus: mmcblk0: error -110   Marek Vasut
• zaurus: mmcblk0: error -110   Marek Vasut
• [PATCH v3] Add GPIO DT support to s3c24xx   Marek Vasut
• Zaurus CF tests -- ok   Marek Vasut
• [PATCH] PXA: Fix typo in proc-xscale.S   Marek Vasut
• [PATCH] PXA: Fix typo in proc-xscale.S   Marek Vasut
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Rohit Vaswani
• [PATCH] nohz: delay going tickless under CPU load to favor deeper C states   Arjan van de Ven
• [PATCH v3] at91: remove MTD_NAND_ATMEL_BUSWIDTH_16 option   Andrew Victor
• [PATCH] ARM: at91: AT91CAP9 has a macb device   Andrew Victor
• External serial 8250/16550   Andrew Victor
• [PATCH 03/14] at91: factorize at91 interrupts init to soc   Andrew Victor
• AT91: Convert to fasteoi IRQ handler, and remove ARM irq_finish   Andrew Victor
• [PATCH 09/14] at91: switch pit timer to early platform devices   Andrew Victor
• [PATCH 5/5] ARM: remove per-platform timex.h include files   Andrew Victor
• [PATCH 05/14] at91: use structure to store the current soc   Andrew Victor
• [PATCH 09/14] at91: switch pit timer to early platform devices   Andrew Victor
• AT91: Convert to fasteoi IRQ handler, and remove ARM irq_finish   Andrew Victor
• AT91: Convert to fasteoi IRQ handler, and remove ARM irq_finish   Andrew Victor
• [PATCH] at91: fix map_io init usage   Andrew Victor
• [PATCH 09/14] at91: switch pit timer to early platform devices   Andrew Victor
• AT91: PIO base-address should be calculated by processor-specific code   Andrew Victor
• AT91: PIO base-address should be calculated by processor-specific code   Andrew Victor
• AT91: Convert RTC and RTT drivers to be independent of processor base-address   Andrew Victor
• AT91: Convert WDT driver to be independent of processor base-address   Andrew Victor
• [PATCH] arm: nomadik: avoid assigning u32 to bool   Rabin Vincent
• [Q] GIC : IRQ_TYPE_LEVEL_LOW interrupts   Rabin Vincent
• ARM unaligned MMIO access with attribute((packed))   Rabin Vincent
• ARM unaligned MMIO access with attribute((packed))   Rabin Vincent
• [PATCH] echi: remove structure packing from ehci_def   Rabin Vincent
• [PATCHv2] echi: remove structure packing from ehci_def   Rabin Vincent
• [GIT PULL] omap changes for v2.6.39 merge window   Detlef Vollmann
• [GIT PULL] omap changes for v2.6.39 merge window   Detlef Vollmann
• [RFC PATCH] Consolidate SRAM support   Detlef Vollmann
• [RFC PATCH] Consolidate SRAM support   Detlef Vollmann
• [RFC PATCH] Consolidate SRAM support   Detlef Vollmann
• [RFC PATCH] Consolidate SRAM support   Detlef Vollmann
• [RFC PATCH v2] Consolidate SRAM support   Detlef Vollmann
• [RFC PATCH 00/23] at91: Replace duplicate device initialisation code with common code   Detlef Vollmann
• [RFC PATCH 1/5] gemini: convert to basic-mmio-gpio   Anton Vorontsov
• [RFC PATCH 0/5] Convert some ARM platforms to basic-mmio-gpio   Anton Vorontsov
• [PATCH v2 01/12] mmc: add none blocking mmc request function   David Vrabel
• [PATCH v2 01/12] mmc: add none blocking mmc request function   David Vrabel
• since when does ARM map the kernel memory in sections?   Peter Waechtler
• since when does ARM map the kernel memory in sections?   Peter Waechtler
• MMC and reliable write - was: since when does ARM map the kernel memory in sections?   Peter Waechtler
• since when does ARM map the kernel memory in sections?   Peter Waechtler
• since when does ARM map the kernel memory in sections?   Peter Waechtler
• [PATCH] plat-nomadik: remove pull-pinconfig and add SPI2   Linus Walleij
• [PATCH] mach-ux500: split per-SoC clock trees   Linus Walleij
• [PATCH] arm: nomadik: avoid assigning u32 to bool   Linus Walleij
• [PATCH 1/2] mach-ux500: voltage domain regulators for DB8500   Linus Walleij
• [PATCH 2/2] mach-ux500: complete regulator constraints for MOP500 board   Linus Walleij
• [GIT PULL] omap changes for v2.6.39 merge window   Linus Walleij
• [PATCHv4 2/4] ARM: Allow machines to override __delay()   Linus Walleij
• [GIT PULL] omap changes for v2.6.39 merge window   Linus Walleij
• [GIT PULL] omap changes for v2.6.39 merge window   Linus Walleij
• [GIT PULL] omap changes for v2.6.39 merge window   Linus Walleij
• [PATCH v2 00/12] mmc: use nonblock mmc requests to minimize latency   Linus Walleij
• [RFC] Extending ARM perf-events for multiple PMUs   Linus Walleij
• [RFC PATCH 0/5] Convert some ARM platforms to basic-mmio-gpio   Linus Walleij
• Status of arch/arm in linux-next   Linus Walleij
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Linus Walleij
• [PATCH 2/2] mach-u300: rewrite gpio driver, move to drivers/gpio   Linus Walleij
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Linus Walleij
• [PATCH 5/6] ARM: nmk: update GPIO chained IRQ handler to entry/exit functions   Linus Walleij
• [PATCH 5/6] ARM: nmk: update GPIO chained IRQ handler to entry/exit functions   Linus Walleij
• [PATCH] tty/serial/pl011: don't print error msg if dmaengine_pause is not supported   Linus Walleij
• [PATCH] dmaengine: implement pause and resume for dw_dmac   Linus Walleij
• [RFC PATCH] Consolidate SRAM support   Linus Walleij
• [PATCH] mmci: sync DATAEND irq with dma transfer done   Linus Walleij
• [PATCH] mmci: sync DATAEND irq with dma transfer done   Linus Walleij
• Status of arch/arm in linux-next   Linus Walleij
• Status of arch/arm in linux-next   Linus Walleij
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Linus Walleij
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Linus Walleij
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Linus Walleij
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Linus Walleij
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Linus Walleij
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Linus Walleij
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Linus Walleij
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Linus Walleij
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Linus Walleij
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Linus Walleij
• [PATCH 1/2] gpio: add a custom configuration mechanism to gpiolib   Linus Walleij
• [PATCH 2/2] mach-u300: rewrite gpio driver, move to drivers/gpio   Linus Walleij
• [PATCH] mmci: sync DATAEND irq with dma transfer done   Linus Walleij
• [PATCH] mmci: sync DATAEND irq with dma transfer done   Linus Walleij
• [PATCH] mmci: sync DATAEND irq with dma transfer done   Linus Walleij
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Linus Walleij
• Status of arch/arm in linux-next   Linus Walleij
• Status of arch/arm in linux-next   Linus Walleij
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Linus Walleij
• Status of arch/arm in linux-next   Linus Walleij
• [v2 0/7] OMAP: GPIO: Use PM runtime framework   Linus Walleij
• since when does ARM map the kernel memory in sections?   Linus Walleij
• [patch 11/16] arm: u300: Use clocksource based sched_clock   Linus Walleij
• [patch 14/16] arm: nomadik: Use clocksource based sched_clock   Linus Walleij
• [PATCH 01/10] Add a common struct clk   Linus Walleij
• [patch 00/16] arm: Replace arm sched_clock by clocksource based sched_clock   Linus Walleij
• arm: msm: Convert irq-vic to generic irq chip   Linus Walleij
• [patch 00/16] arm: Replace arm sched_clock by clocksource based sched_clock   Linus Walleij
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Linus Walleij
• [PATCH 00/10] U300 and Ux500 GPIO consolidation patch set   Linus Walleij
• [PATCH 01/10] gpio: add a custom configuration mechanism to gpiolib   Linus Walleij
• [PATCH 02/10] mach-u300: rewrite gpio driver, move to drivers/gpio   Linus Walleij
• [PATCH 03/10] plat-nomadik: remove pull-pinconfig and add SPI2   Linus Walleij
• [PATCH 04/10] plat-nomadik: gpio show all pins in debug   Linus Walleij
• [PATCH 05/10] plat-nomadik: add function to read GPIO pull down status   Linus Walleij
• [PATCH 06/10] plat-nomadik: disable clocks when unused   Linus Walleij
• [PATCH 07/10] gpio: move the Nomadik GPIO driver to drivers/gpio   Linus Walleij
• [PATCH 08/10] gpio/nomadik-gpio: work with all machines   Linus Walleij
• [PATCH 09/10] gpio/nomadik-gpio: factor out state cast function   Linus Walleij
• [PATCH 10/10] gpio/nomadik-gpio: merge pinconfig API   Linus Walleij
• [v2 0/7] OMAP: GPIO: Use PM runtime framework   Linus Walleij
• [PATCH] gpio: rename VIA local config struct   Linus Walleij
• [PATCH 02/10] mach-u300: rewrite gpio driver, move to drivers/gpio   Linus Walleij
• [PATCH 02/10] mach-u300: rewrite gpio driver, move to drivers/gpio   Linus Walleij
• [PATCH] gpio: remove some legacy comments in build files   Linus Walleij
• [PATCH 1/2] gpio: add a custom configuration mechanism to gpiolib   Linus Walleij
• [patch 00/16] arm: Replace arm sched_clock by clocksource based sched_clock   Linus Walleij
• [PATCH 01/10] Add a common struct clk   Linus Walleij
• [PATCH 01/10] Add a common struct clk   Linus Walleij
• [PATCHv5 1/3] ARM: Translate delay.S into (mostly) C   Mattias Wallin
• [PATCHv5 1/3] ARM: Translate delay.S into (mostly) C   Mattias Wallin
• [PATCHv5 1/3] ARM: Translate delay.S into (mostly) C   Mattias Wallin
• [PATCHv5 2/3] ARM: Allow machines to override __delay()   Mattias Wallin
• [PATCHv5 3/3] ARM: Implement a timer based __delay() loop   Mattias Wallin
• [PATCH] OMAP4: clockdomain: Follow recommended enable sequence   Paul Walmsley
• [PATCH 0/5] OMAP hwmod/PRCM/clock: patches for 2.6.39-rc   Paul Walmsley
• [PATCH 1/5] OMAP2+: hwmod data: Fix wrong dma_system end address   Paul Walmsley
• [PATCH 2/5] OMAP4: clock data: Change DSS clock aliases   Paul Walmsley
• [PATCH 3/5] OMAP2+: PM: Fix the saving of CM_AUTOIDLE_PLL register on scratchpad area   Paul Walmsley
• [PATCH 4/5] OMAP3: PM: Do not rely on ROM code to restore CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL   Paul Walmsley
• [PATCH 5/5] OMAP2/3: hwmod: fix gpio-reset timeouts seen during bootup.   Paul Walmsley
• [PATCH 0/2] Couple of fixes regarding CM_AUTOIDLE_PLL register   Paul Walmsley
• [PATCH 2/2] OMAP3: PM: Do not rely on ROM code to restore CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL   Paul Walmsley
• [PATCH] OMAP4: clockdomain: Follow recommended enable sequence   Paul Walmsley
• [PATCH] OMAP: Added recalculation of clock rate in 'clk_set_rate'   Paul Walmsley
• [GIT PULL] OMAP hwmod/PRCM/clock: patches for 2.6.39-rc   Paul Walmsley
• [PATCH] OMAP2+: powerdomain: fix typo: lose context --> loose context   Paul Walmsley
• [PATCH] OMAP: Added recalculation of clock rate in 'clk_set_rate'   Paul Walmsley
• Common clock and dvfs   Paul Walmsley
• [PATCH 1/2] TI816X: Add minimal hwmod data   Paul Walmsley
• [PATCH 1/2] TI816X: Add minimal hwmod data   Paul Walmsley
• [GIT PULL] OMAP hwmod/PRCM/clock: patches for 2.6.39-rc   Paul Walmsley
• [RFC 1/6]Fix typo "recieve" in various parts of the kernel.   Ricard Wanderlof
• since when does ARM map the kernel memory in sections?   Andrei Warkentin
• [PATCH] mmc: sdhci: add support for pre_req and post_req   Andrei Warkentin
• Lockdep question.   Andrei Warkentin
• Lockdep question.   Andrei Warkentin
• since when does ARM map the kernel memory in sections?   Andrei Warkentin
• since when does ARM map the kernel memory in sections?   Andrei Warkentin
• [PATCH] mmc: sdhci: add support for pre_req and post_req   Andrei Warkentin
• MMC and reliable write - was: since when does ARM map the kernel memory in sections?   Andrei Warkentin
• since when does ARM map the kernel memory in sections?   Andrei Warkentin
• MMC and reliable write - was: since when does ARM map the kernel memory in sections?   Andrei Warkentin
• since when does ARM map the kernel memory in sections?   Andrei Warkentin
• [PATCH] ARM: tegra: harmony: Register and configure WM8903 IRQ GPIO   Stephen Warren
• [PATCH] ARM: Tegra: Seaboard: Re-order sdhci device registration   Stephen Warren
• [PATCH] ARM: Tegra: Harmony: Fix conflicting GPIO numbering   Stephen Warren
• [PATCH v2] ARM: Tegra: Harmony: Fix conflicting GPIO numbering   Stephen Warren
• [PATCH] ARM: Tegra: Seaboard board updates for audio   Stephen Warren
• [PATCH] ARM: Tegra: Seaboard board updates for audio   Stephen Warren
• [GIT PULL] Please pull ASoC's tegra branch into Tegra for-next   Stephen Warren
• [PATCH 0/4] Tegra patches for 2.6.40   Stephen Warren
• [PATCH 1/4] ARM: Tegra: Harmony: Fix conflicting GPIO numbering   Stephen Warren
• [PATCH 2/4] ARM: Tegra: Seaboard: Re-order sdhci device registration   Stephen Warren
• [PATCH 3/4] ARM: Tegra: Seaboard board updates for audio   Stephen Warren
• [PATCH 4/4] ARM: tegra: Harmony: Register and configure WM8903 IRQ GPIO   Stephen Warren
• [PATCH 0/4] Tegra patches for 2.6.40   Stephen Warren
• [alsa-devel] [PATCH] ASoC: prevent compilers from optimising pll calculation into __aeabi__uldivmod   Stephen Warren
• [PATCH 3/3] video: mxsfb: add DOTCLK polarity configuration support   Lothar Waßmann
• [PATCH V4 0/4] add the GPMI controller driver for IMX23/IMX28   Lothar Waßmann
• [PATCH V4 0/4] add the GPMI controller driver for IMX23/IMX28   Lothar Waßmann
• [PATCH v5 1/4] ARM: add GPMI support for imx23/imx28   Lothar Waßmann
• [PATCH v5 2/4] MTD : add the common code for GPMI controller driver   Lothar Waßmann
• [PATCH v5 2/4] MTD : add the common code for GPMI controller driver   Lothar Waßmann
• [PATCH v5 2/4] MTD : add the common code for GPMI controller driver   Lothar Waßmann
• [PATCH v6 1/3] MTD : add the common code for GPMI controller driver   Lothar Waßmann
• [PATCH] MXS DMA: add end of list sentinel to platform_id list   Lothar Waßmann
• [PATCH] MXS DMA: enable CLKGATE before accessing registers   Lothar Waßmann
• [PATCH v6 1/3] MTD : add the common code for GPMI controller driver   Lothar Waßmann
• [PATCH 1/2] ARM: ELF: Define new core note type for VFP registers   Ulrich Weigand
• [PATCH v3 2/2] ARM: ptrace: Migrate to regsets framework   Ulrich Weigand
• [PATCH] ARM: type casts update_sched_clock cyc_to_sched_clock cyc_to_fixed_sched_clock   Jan Weitzel
• [PATCH] ARM: type casts update_sched_clock cyc_to_sched_clock cyc_to_fixed_sched_clock   Jan Weitzel
• The cleanest way to power off a board inside the kernel.   Jan Weitzel
• [PATCH v3] ARM: omap2: mtd split nand_scan in ident and tail   Jan Weitzel
• [PATCH V2 1/3] arm: lpc32xx: add tsc-device   Kevin Wells
• [PATCH v4 0/10] Support for NXP LPC2K SoCs   Kevin Wells
• [PATCH V2 1/3] arm: lpc32xx: add tsc-device   Kevin Wells
• GIT pull request - lpc32xx core updates   Kevin Wells
• GIT pull request:lpc32xx core updates   Kevin Wells
• RAID/dmaengine violates the dma-streaming API   Dan Williams
• [PATCH 6/6] da8xx: enable the use of the ICPFUNC in i2c-davinci   Mike Williamson
• [RFC 0/4] convert stmp into mxs and delete the obsolete platform   Vitaly Wool
• [RFC 0/4] convert stmp into mxs and delete the obsolete platform   Vitaly Wool
• [PATCH] mmci: sync DATAEND irq with dma transfer done   Vitaly Wool
• [PATCH] mmci: sync DATAEND irq with dma transfer done   Vitaly Wool
• [GIT PULL] omap changes for v2.6.39 merge window   Bryan Wu
• [PATCH/RFC 0/6] ARM: runtime PM: consolidate runtime PM implementations   Rafael J. Wysocki
• [PATCH/RFC 0/6] ARM: runtime PM: consolidate runtime PM implementations   Rafael J. Wysocki
• [PATCH/RFC 4/6] ARM: move SH-mobile runtime PM to arm/common for sharing with other platforms   Rafael J. Wysocki
• [RFC PATCH] Current status, suspend-to-disk support on ARM   Rafael J. Wysocki
• [PATCH 0/14] Remove sysdev suspend/resume and shutdown operations   Rafael J. Wysocki
• [PATCH 1/14] PM: Fix error code paths executed after failing syscore_suspend()   Rafael J. Wysocki
• [PATCH 2/14] PM: Add missing syscore_suspend() and syscore_resume() calls   Rafael J. Wysocki
• [PATCH 3/14] ARM: Use struct syscore_ops instead of sysdevs for PM in common code   Rafael J. Wysocki
• [PATCH 4/14] ARM / OMAP: Use struct syscore_ops for "core" power management   Rafael J. Wysocki
• [PATCH 5/14] ARM / Integrator: Use struct syscore_ops for core PM   Rafael J. Wysocki
• [PATCH 6/14] ARM / SA1100: Use struct syscore_ops for "core" power management   Rafael J. Wysocki
• [PATCH 7/14] ARM / PXA: Use struct syscore_ops for "core" power management   Rafael J. Wysocki
• [PATCH 8/14] ARM / Samsung: Use struct syscore_ops for "core" power management   Rafael J. Wysocki
• [PATCH 9/14] PM / Blackfin: Use struct syscore_ops instead of sysdevs for PM   Rafael J. Wysocki
• [PATCH 10/14] PM / MIPS: Use struct syscore_ops instead of sysdevs for PM   Rafael J. Wysocki
• [PATCH 11/14] PM / AVR32: Use struct syscore_ops instead of sysdevs for PM   Rafael J. Wysocki
• [PATCH 12/14] PM / UNICORE32: Use struct syscore_ops instead of sysdevs for PM   Rafael J. Wysocki
• [PATCH 13/14] PM / PowerPC: Use struct syscore_ops instead of sysdevs for PM   Rafael J. Wysocki
• [PATCH 14/14] PM: Remove sysdev suspend, resume and shutdown operations   Rafael J. Wysocki
• [PATCH 10/14] PM / MIPS: Use struct syscore_ops instead of sysdevs for PM   Rafael J. Wysocki
• [PATCH 9/14] PM / Blackfin: Use struct syscore_ops instead of sysdevs for PM   Rafael J. Wysocki
• Status of arch/arm in linux-next   Rafael J. Wysocki
• [PATCH 11/14] PM / AVR32: Use struct syscore_ops instead of sysdevs for PM   Rafael J. Wysocki
• [RFC PATCH v2 1/3] PM / Core: suspend_again callback for device PM.   Rafael J. Wysocki
• [RFC PATCH v2 1/3] PM / Core: suspend_again callback for device PM.   Rafael J. Wysocki
• howto set some kernel pages to readonly?   Peter Wächtler
• howto set some kernel pages to readonly?   Peter Wächtler
• Fwd: Re: howto set some kernel pages to readonly?   Peter Wächtler
• since when does ARM map the kernel memory in sections?   Peter Wächtler
• since when does ARM map the kernel memory in sections?   Peter Wächtler
• since when does ARM map the kernel memory in sections?   Peter Wächtler
• since when does ARM map the kernel memory in sections?   Peter Wächtler
• [PATCH 12/14] PM / UNICORE32: Use struct syscore_ops instead of sysdevs for PM   Guan Xuetao
• [RFC] What is the preferred way to share ADC unit between hwmon and input(ts) drivers?   Ilya Yanok
• [PATCH 0/3] ARM: SAMSUNG: add entry and exit functions for interrupt chained handler   Changhwan Youn
• [PATCH 1/3] ARM: SAMSUNG: add entry and exit functions for uart interrupt chained handler   Changhwan Youn
• [PATCH 2/3] ARM: SAMSUNG: add entry and exit functions for pwm interrupt chained handler   Changhwan Youn
• [PATCH 3/3] ARM: EXYNOS4: add entry and exit functions for external interrupt chained handler   Changhwan Youn
• [PATCH] pxa/mioa701: use gpio arrays for global and gsm gpio initialization   pHilipp Zabel
• [PATCH] pxa/hx4700: bq24022 regulator needs to be enabled   Philipp Zabel
• [PATCH] pxa/magician: bq24022 regulator needs to be enabled   Philipp Zabel
• [PATCH] pxa/hx4700: use gpio arrays for global gpio initialization   Philipp Zabel
• [PATCH] pxa/magician: use gpio arrays for backlight and lcd power init   Philipp Zabel
• [PATCH] pxa/mioa701: use gpio arrays for global and gsm gpio initialization   Philipp Zabel
• [PATCH] pxa/magician: fix MAGICIAN_EGPIO_BASE, align with NR_BUILTIN_GPIO   Philipp Zabel
• [PATCH] pxa/hx4700: Add hx4700 LED support   Philipp Zabel
• [PATCH] pxa/magician: align MAGICIAN_EGPIO_BASE with NR_BUILTIN_GPIO   Philipp Zabel
• [PATCH v2] pxa/magician: use gpio arrays for backlight and global gpio initialization   Philipp Zabel
• [PATCH v2] pxa/mioa701: use gpio arrays for global and gsm gpio initialization   Philipp Zabel
• [PATCH v2] pxa/hx4700: use gpio arrays for global gpio initialization   Philipp Zabel
• [PATCH] pxa/hx4700: Add hx4700 LED support   Philipp Zabel
• [PATCH v2] pxa/hx4700: use gpio arrays for global gpio initialization   Philipp Zabel
• [PATCH v3] pxa/hx4700: use gpio arrays for global gpio initialization   Philipp Zabel
• [PATCH v3] pxa/mioa701: use gpio arrays for global and gsm gpio initialization   Philipp Zabel
• [PATCH v3] pxa/magician: use gpio arrays for backlight and global gpio initialization   Philipp Zabel
• [PATCH RFC] util-linux: readprofile: don't stop parsing at __init_end   Karel Zak
• [PATCH V2 1/2] mtd: nand: Allow NAND chip ids to be included standalone.   Dima Zavin
• Status of arch/arm in linux-next   Alexey Zaytsev
• Status of arch/arm in linux-next   Alexey Zaytsev
• [PATCH 01/10] Add a common struct clk   Richard Zhao
• [PATCH 01/10] Add a common struct clk   Richard Zhao
• [PATCH 01/10] Add a common struct clk   Richard Zhao
• [PATCH RFC] clk: add support for automatic parent handling   Richard Zhao
• [PATCH 01/10] Add a common struct clk   Richard Zhao
• [PATCH 05/10] clk: Add support for simple dividers   Richard Zhao
• [PATCH RFC] clk: add support for automatic parent handling   Richard Zhao
• [PATCH RFC] clk: add support for automatic parent handling   Richard Zhao
• [PATCH 05/10] clk: Add support for simple dividers   Richard Zhao
• [PATCH RFC 0/1] RAMDISK: doing write barrier will return -EIO   Richard Zhu
• [PATCH RFC 0/1] RAMDISK: doing write barrier will return -EIO   Richard Zhu
• [PATCH RFC] RAMDISK: doing write barrier will return -EIO   Richard Zhu
• [PATCH V3 1/2] AHCI Add the AHCI SATA feature on MX53 platforms   Richard Zhu
• [PATCH V3 2/2] MX53 Enable the AHCI SATA on MX53 LOCO   Richard Zhu
• [PATCH V4 1/2] AHCI Add the AHCI SATA feature on MX53 platforms   Richard Zhu
• [PATCH V4 2/2] MX53 Enable the AHCI SATA on MX53 LOCO   Richard Zhu
• [PATCH RFC 0/1] RAMDISK: doing write barrier will return -EIO   Richard Zhu
• [PATCH V5 1/2] AHCI Add the AHCI SATA feature on MX53 platforms   Richard Zhu
• [PATCH V5 2/2] MX53 Enable the AHCI SATA on MX53 LOCO   Richard Zhu
• [PATCH 2/9] ARM: pxa: enable sparsemem in saarb   Haojian Zhuang
• [PATCH 3/9] ARM: mmp: remove redundant macro definition in mfp   Haojian Zhuang
• [PATCH 3/9] ARM: mmp: remove redundant macro definition in mfp   Haojian Zhuang
• [PATCH 1/7] ARM: pxa: add clk_set_rate()   Haojian Zhuang
• [PATCH 2/7] ARM: pxa: always clear LPM bits for PXA168 MFPR   Haojian Zhuang
• [PATCH 3/7] ARM: mmp: set correct uart according to board   Haojian Zhuang
• [PATCH 4/7] ARM: mmp: update the reset implementation   Haojian Zhuang
• [PATCH 5/7] ARM: pxa: align NR_BUILTIN_GPIO with GPIO interrupt number   Haojian Zhuang
• [PATCH 6/7] ARM: mmp: align NR_BUILTIN_GPIO with gpio interrupt number   Haojian Zhuang
• [PATCH 7/7] ARM: mmp: enable max7312 gpio expander in dkb   Haojian Zhuang
• [PATCH 1/3] ARM: pxa: enable pxa95x interrupt handler   Haojian Zhuang
• [PATCH 2/3] ARM: mmp: enable one wire controller in ttc dkb   Haojian Zhuang
• [PATCH 3/3] ARM: pxa: enable 1wire controller   Haojian Zhuang
• [RFC PATCH] Consolidate SRAM support   Haojian Zhuang
• [RFC PATCH v2] Consolidate SRAM support   Haojian Zhuang
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Haojian Zhuang
• [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib   Haojian Zhuang
• [PATCH 1/3] i2c: append hardware lock with bus lock   Haojian Zhuang
• [PATCH 2/3] i2c: pxa: support hardware lock   Haojian Zhuang
• [PATCH 3/3] ARM: mmp: add hardware lock support in PXA910   Haojian Zhuang
• [PATCH 1/3] i2c: append hardware lock with bus lock   Haojian Zhuang
• [PATCH 1/3] i2c: append hardware lock with bus lock   Haojian Zhuang
• [PATCH 1/3] i2c: append hardware lock with bus lock   Haojian Zhuang
• [PATCH 2/3] i2c: pxa: support hardware lock   Haojian Zhuang
• [PATCH 3/3] ARM: mmp: add hardware lock support in PXA910   Haojian Zhuang
• [RFC] Extending ARM perf-events for multiple PMUs   Peter Zijlstra
• [RFC] Extending ARM perf-events for multiple PMUs   Peter Zijlstra
• [RFC] Extending ARM perf-events for multiple PMUs   Peter Zijlstra
• Lockdep question.   Peter Zijlstra
• about uclinux for armnommu dma allocate issue   Wan ZongShun
• [RFC PATCH 3/5] w90x900: convert to basic-mmio-gpio   Wan ZongShun
• [GIT PULL] omap changes for v2.6.39 merge window   Marc Zyngier
• [GIT PULL] omap changes for v2.6.39 merge window   Marc Zyngier
• [GIT PULL] omap changes for v2.6.39 merge window   Marc Zyngier
• [GIT PULL] omap changes for v2.6.39 merge window   Marc Zyngier
• [RFC PATCHv2 09/20] ARM: architected timers: add A15 architected timers   Marc Zyngier
• [PATCH] ARM: tegra: consolidate GIC extension usage   Marc Zyngier
• [RFC PATCH 00/12] Consolidating GIC per-cpu interrupts   Marc Zyngier
• [RFC PATCH 01/12] ARM: gic: add per-cpu interrupt multiplexer   Marc Zyngier
• [RFC PATCH 02/12] ARM: smp_twd: add support for remapped PPI interrupts   Marc Zyngier
• [RFC PATCH 03/12] ARM: omap4: use remapped PPI interrupts for local timer   Marc Zyngier
• [RFC PATCH 04/12] ARM: versatile: use remapped PPI interrupts for local timer   Marc Zyngier
• [RFC PATCH 05/12] ARM: shmobile: use remapped PPI interrupts for local timer   Marc Zyngier
• [RFC PATCH 06/12] ARM: ux500: use remapped PPI interrupts for local timer   Marc Zyngier
• [RFC PATCH 07/12] ARM: tegra: use remapped PPI interrupts for local timer   Marc Zyngier
• [RFC PATCH 08/12] ARM: msm: use remapped PPI interrupts for local timer   Marc Zyngier
• [RFC PATCH 09/12] ARM: exynos4: use remapped PPI interrupts for local timer   Marc Zyngier
• [RFC PATCH 10/12] ARM: gic: remove previous local timer interrupt handling   Marc Zyngier
• [RFC PATCH 11/12] ARM: gic: add compute_irqnr macro for exynos4   Marc Zyngier
• [RFC PATCH 12/12] ARM: SMP: automatically select ARM_GIC_VPPI   Marc Zyngier
• [RFC PATCH 06/12] ARM: ux500: use remapped PPI interrupts for local timer   Marc Zyngier
• [RFC PATCH 02/12] ARM: smp_twd: add support for remapped PPI interrupts   Marc Zyngier
• [RFC PATCH 01/12] ARM: gic: add per-cpu interrupt multiplexer   Marc Zyngier
• [RFC PATCH 01/12] ARM: gic: add per-cpu interrupt multiplexer   Marc Zyngier
• [RFC PATCH 02/12] ARM: smp_twd: add support for remapped PPI interrupts   Marc Zyngier
• [PATCH] ARM: tegra: consolidate GIC extension usage   Marc Zyngier
• Query about __unmap_hugepage_range   bill
• Query about __unmap_hugepage_range   bill
• [Libhugetlbfs-devel] Query about __unmap_hugepage_range   bill
• Query about vexpress_ct_ca9x4 watchdog issue ?   bill
• Query about vexpress_ct_ca9x4 watchdog issue ?   bill
• Query about vexpress_ct_ca9x4 watchdog issue ?   bill
• Query about vexpress_ct_ca9x4 watchdog issue ?   bill
• Query about vexpress_ct_ca9x4 watchdog issue ?   bill
• [PATCH] Moving Marvell Dove platform defaults to ARMv7   saeed bishara
• [PATCH] Fix the broken build for Marvell Dove platform.   saeed bishara
• [PATCH] Moving Marvell Dove platform defaults to ARMv7   saeed bishara
• RAID/dmaengine violates the dma-streaming API   saeed bishara
• RAID/dmaengine violates the dma-streaming API   saeed bishara
• update cyapa_i2c_platfrom_data, remove relative mode supporting. (issue6902105)   dudl at cypress.com
• [PATCH 0/2] video: add Samsung SoC based MIPI-DSI support.   daeinki
• [PATCH 1/2] video: add Samsung SoC MIPI-DSI controller driver.   daeinki
• [PATCH] [ARM] mx27: Add ARMadeus Systems APF27 board support   julien.boibessot at free.fr
• [PATCH 1/7] Add a mfd IPUv3 driver   jason.chen at freescale.com
• [PATCH] fix build warnings on defconfigs   wanlong gao
• kedam.kkraj at gmail.com is sending you a free domain name   kedam.kkraj at gmail.com
• [PATCH] ARM: fix badly implementation of wmb   tom.leiming at gmail.com
• [PATCH] fix build warnings on defconfigs   wanlong.gao at gmail.com
• [PATCH 1/7] Add a mfd IPUv3 driver   weitway at gmail.com
• [PATCH 2/7] ARM i.MX5: Add IPU device support   weitway at gmail.com
• [PATCH 3/7] Add i.MX5 framebuffer driver   weitway at gmail.com
• [PATCH 4/7] ARM i.MX51 babbage: Add framebuffer support   weitway at gmail.com
• [PATCH 5/7] ARM i.MX53 loco: Add framebuffer support   weitway at gmail.com
• [PATCH 6/7] ARM i.MX53: add pwm devices support   weitway at gmail.com
• [PATCH 7/7] ARM: i.MX53 loco: add pwm backlight device   weitway at gmail.com
• [PATCH 2/9] ARM i.MX5: Add IPU device support   weitway at gmail.com
• [PATCH 3/9] Add i.MX5 framebuffer driver   weitway at gmail.com
• [PATCH 4/9] ARM i.MX51 babbage: Add framebuffer support   weitway at gmail.com
• [PATCH 5/9] ARM i.MX53 loco: Add framebuffer support   weitway at gmail.com
• [PATCH v3] [ARM] MX1: Add ARMadeus Systems APF9328 board support   gwenhael.goavec
• [PATCH v3] [ARM] MX1: Add ARMadeus Systems APF9328 board support   gwenhael.goavec
• [TuxOnIce-devel] [RFC PATCH] Current status, suspend-to-disk support on ARM   john at johnandjuliet.com
• [PATCH] ARM: cache-l2x0: fix wrong print of AUX_CTRL register   srinidhi kasagar
• [PATCH 5/5] driver core: let dev_set_drvdata return int instead of void as it can fail   viresh kumar
• dmaengine: Can we schedule new transfer from dma callback routine??   viresh kumar
• dmaengine: Can we schedule new transfer from dma callback routine??   viresh kumar
• dmaengine: Can we schedule new transfer from dma callback routine??   viresh kumar
• [PATCH] dmaengine: implement pause and resume for dw_dmac   viresh kumar
• [PATCH] dmaengine: implement pause and resume for dw_dmac   viresh kumar
• [PATCH] tty/serial/pl011: don't print error msg if dmaengine_pause is not supported   viresh kumar
• [PATCH 2/6] dmaengine/dw_dmac: Enable resubmission from callback routine.   viresh kumar
• [PATCH 1/6] dmaengine/dw_dmac: Replace spin_lock_bh with irqsave variants   viresh kumar
• [PATCH 2/6] dmaengine/dw_dmac: Enable resubmission from callback routine.   viresh kumar
• [PATCH V2 7/7] dmaengine/dw_dmac: implement pause and resume in dwc_control   viresh kumar
• Query about vexpress_ct_ca9x4 watchdog issue ?   viresh kumar
• Query about vexpress_ct_ca9x4 watchdog issue ?   viresh kumar
• Query about vexpress_ct_ca9x4 watchdog issue ?   viresh kumar
• Query about vexpress_ct_ca9x4 watchdog issue ?   viresh kumar
• [PATCH V4 resend] rtc: Adding support for spear rtc   viresh kumar
• [rtc-linux] Re: [PATCH V4 resend] rtc: Adding support for spear rtc   viresh kumar
• [PATCH V2 0/7] dmaengine/dw_dmac updates   viresh kumar
• [PATCH 1/6] dmaengine/dw_dmac: Replace spin_lock_bh with irqsave variants   viresh kumar
• [PATCH 1/6] dmaengine/dw_dmac: Replace spin_lock_bh with irqsave variants   viresh kumar
• [PATCH V3 0/7] dmaengine/dw_dmac updates   viresh kumar
• [PATCH V3 3/7] dmaengine/dw_dmac: don't call callback routine in case dmaengine_terminate_all() is called   viresh kumar
• [PATCH V3 2/7] dmaengine/dw_dmac: Replace spin_lock* with irqsave variants   viresh kumar
• [PATCH V3 2/7] dmaengine/dw_dmac: Replace spin_lock* with irqsave variants   viresh kumar
• [PATCH] ux500: Adding support for u8500 Hsem functionality.   mathieu.poirier at linaro.org
• [PATCH 1/2] ux500: Adding support for u8500 Hsem functionality V2   mathieu.poirier at linaro.org
• [PATCH] ux500: Adding support for u8500 Hsem functionality V3   mathieu.poirier at linaro.org
• Clarification regarding DMA in s3c2440.   mindentropy
• Clarification regarding DMA in s3c2440.   mindentropy
• [PATCH 1/2] AM35xx-Craneboard: USB EHCI: Fix USB ECHI PHY reset   srinath at mistralsolutions.com
• [PATCH 2/2] AM35xx-Craneboard:Display: Add DVI and TV Support   srinath at mistralsolutions.com
• [PATCH 0/5] OMAP: cpuidle code clean-up   jean.pihet at newoldbits.com
• [PATCH 1/5] OMAP3 cpuidle: remove useless SDP specific timings   jean.pihet at newoldbits.com
• [PATCH 2/5] OMAP3: clean-up mach specific cpuidle data structures   jean.pihet at newoldbits.com
• [PATCH 3/5] OMAP3: cpuidle: re-organize the C-states data   jean.pihet at newoldbits.com
• [PATCH 4/5] OMAP3: cpuidle: code rework for improved readability   jean.pihet at newoldbits.com
• [PATCH 5/5] OMAP3: cpuidle: change the power domains modes determination logic   jean.pihet at newoldbits.com
• [PATCH v1] tegra: remove the clock sleepable WARNING   wni at nvidia.com
• Kernel hangs at freeing memory 88K   Murali Mohan p
• Kernel hangs at Freeing Memory 88K   Murali Mohan p
• kernel freezes at freeing memory 88K   Murali Mohan p
• [PATCH V7 02/17] SPEAr13xx: Add PCIe host controller base driver support.   pratyush
• [PATCH V7 02/17] SPEAr13xx: Add PCIe host controller base driver support.   pratyush
• [PATCH V7 02/17] SPEAr13xx: Add PCIe host controller base driver support.   pratyush
• [PATCH resend] rtc: Adding support for spear rtc   rajeev
• cachepolicy on arm UP/SMP   rocky
• [PATCH v2 00/12] mmc: use nonblock mmc requests to minimize latency   anish singh
• [PATCH v4] ARM: Use generic BUG() handler   anish singh
• [PATCH] ARM: Allow for kernel command line concatenation   oskar.andero at sonyericsson.com
• [PATCH] ARM: Allow for kernel command line concatenation   oskar.andero at sonyericsson.com
• [PATCH] ARM: Allow for kernel command line concatenation   oskar.andero at sonyericsson.com
• [PATCH] ARM: Allow for kernel command line concatenation   oskar.andero at sonyericsson.com
• [PATCH v2] arm: omap2: enable smc instruction for sleep34xx   oskar.andero at sonyericsson.com
• [patch 00/16] arm: Replace arm sched_clock by clocksource based sched_clock   john stultz
• Architecture specific implementations for tickless kernel and deferrable timers   john stultz
• [PATCH RFC] clk: add support for automatic parent handling   torbenh
• AT91: Convert to fasteoi IRQ handler, and remove ARM irq_finish   torbenh
• [PATCH RFC] clk: add support for automatic parent handling   torbenh
• [PATCH 0/6] n35: Fixes and clean up for Acer n30/n35   jiri.pinkava at vscht.cz
• [PATCH 1/6] n35: Fix key code values for some GPIO keys.   jiri.pinkava at vscht.cz
• [PATCH 2/6] n35: Update GPIO documentation   jiri.pinkava at vscht.cz
• [PATCH 3/6] n30: Clean-up UARTs configuration   jiri.pinkava at vscht.cz
• [PATCH 4/6] n30: Fix MMC power management   jiri.pinkava at vscht.cz
• [PATCH 5/6] n30: Add touchscreen support for Acer n30 / n35   jiri.pinkava at vscht.cz
• [PATCH 6/6] n35: Add support for LCD backlight regulation   jiri.pinkava at vscht.cz
• [RFC] ARM DMA mapping TODO, v1   Valdis.Kletnieks at vt.edu
• [ARM] Issue of memory compaction on kernel 2.6.35.9   naveen yadav