[PATCH] at91: Add ARCH_ID and basic cpu macros definition for 5series chips family.
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Fri Apr 22 22:52:25 EDT 2011
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
---
Hi,
this patch is just an extract of the 5series support send weeks ago
as we need it for drivers and the soc support will not be present next
merge window until the rework of the at91 will be weel advanced
Best Regards,
J.
arch/arm/mach-at91/include/mach/cpu.h | 28 ++++++++++++++++++++++++++++
1 files changed, 28 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index 3bef931..0700f21 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -27,6 +27,7 @@
#define ARCH_ID_AT91SAM9G45 0x819b05a0
#define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */
#define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */
+#define ARCH_ID_AT91SAM9X5 0x819a05a0
#define ARCH_ID_AT91CAP9 0x039A03A0
#define ARCH_ID_AT91SAM9XE128 0x329973a0
@@ -55,6 +56,12 @@ static inline unsigned long at91_cpu_fully_identify(void)
#define ARCH_EXID_AT91SAM9G46 0x00000003
#define ARCH_EXID_AT91SAM9G45 0x00000004
+#define ARCH_EXID_AT91SAM9G15 0x00000000
+#define ARCH_EXID_AT91SAM9G35 0x00000001
+#define ARCH_EXID_AT91SAM9X35 0x00000002
+#define ARCH_EXID_AT91SAM9G25 0x00000003
+#define ARCH_EXID_AT91SAM9X25 0x00000004
+
static inline unsigned long at91_exid_identify(void)
{
return at91_sys_read(AT91_DBGU_EXID);
@@ -143,6 +150,27 @@ static inline unsigned long at91cap9_rev_identify(void)
#define cpu_is_at91sam9m11() (0)
#endif
+#ifdef CONFIG_ARCH_AT91SAM9X5
+#define cpu_is_at91sam9x5() (at91_cpu_identify() == ARCH_ID_AT91SAM9X5)
+#define cpu_is_at91sam9g15() (cpu_is_at91sam9x5() && \
+ (at91_exid_identify() == ARCH_EXID_AT91SAM9G15))
+#define cpu_is_at91sam9g35() (cpu_is_at91sam9x5() && \
+ (at91_exid_identify() == ARCH_EXID_AT91SAM9G35))
+#define cpu_is_at91sam9x35() (cpu_is_at91sam9x5() && \
+ (at91_exid_identify() == ARCH_EXID_AT91SAM9X35))
+#define cpu_is_at91sam9g25() (cpu_is_at91sam9x5() && \
+ (at91_exid_identify() == ARCH_EXID_AT91SAM9G25))
+#define cpu_is_at91sam9x25() (cpu_is_at91sam9x5() && \
+ (at91_exid_identify() == ARCH_EXID_AT91SAM9X25))
+#else
+#define cpu_is_at91sam9x5() (0)
+#define cpu_is_at91sam9g15() (0)
+#define cpu_is_at91sam9g35() (0)
+#define cpu_is_at91sam9x35() (0)
+#define cpu_is_at91sam9g25() (0)
+#define cpu_is_at91sam9x25() (0)
+#endif
+
#ifdef CONFIG_ARCH_AT91CAP9
#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9)
#define cpu_is_at91cap9_revB() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_B)
--
1.7.4.1
More information about the linux-arm-kernel
mailing list