[PATCH 1/5] dmaengine: at_hdmac: modify way to use interrupts
Nicolas Ferre
nicolas.ferre at atmel.com
Fri Apr 1 13:19:12 EDT 2011
Now we use Buffer Transfer Completed interrupts. If we
want a chained buffer completed information, we setup the
ATC_IEN bit in CTRLB register in the lli.
This is done by set_desc_eol() function and used by
memcpy/slave_sg functions.
Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
---
drivers/dma/at_hdmac.c | 4 ++--
drivers/dma/at_hdmac_regs.h | 11 ++++++++---
2 files changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index 3d7d705..13050e6 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -464,7 +464,7 @@ static irqreturn_t at_dma_interrupt(int irq, void *dev_id)
for (i = 0; i < atdma->dma_common.chancnt; i++) {
atchan = &atdma->chan[i];
- if (pending & (AT_DMA_CBTC(i) | AT_DMA_ERR(i))) {
+ if (pending & (AT_DMA_BTC(i) | AT_DMA_ERR(i))) {
if (pending & AT_DMA_ERR(i)) {
/* Disable channel on AHB error */
dma_writel(atdma, CHDR, atchan->mask);
@@ -549,7 +549,7 @@ atc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
}
ctrla = ATC_DEFAULT_CTRLA;
- ctrlb = ATC_DEFAULT_CTRLB
+ ctrlb = ATC_DEFAULT_CTRLB | ATC_IEN
| ATC_SRC_ADDR_MODE_INCR
| ATC_DST_ADDR_MODE_INCR
| ATC_FC_MEM2MEM;
diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h
index 495457e..8303306 100644
--- a/drivers/dma/at_hdmac_regs.h
+++ b/drivers/dma/at_hdmac_regs.h
@@ -309,8 +309,8 @@ static void atc_setup_irq(struct at_dma_chan *atchan, int on)
struct at_dma *atdma = to_at_dma(atchan->chan_common.device);
u32 ebci;
- /* enable interrupts on buffer chain completion & error */
- ebci = AT_DMA_CBTC(atchan->chan_common.chan_id)
+ /* enable interrupts on buffer transfer completion & error */
+ ebci = AT_DMA_BTC(atchan->chan_common.chan_id)
| AT_DMA_ERR(atchan->chan_common.chan_id);
if (on)
dma_writel(atdma, EBCIER, ebci);
@@ -347,7 +347,12 @@ static inline int atc_chan_is_enabled(struct at_dma_chan *atchan)
*/
static void set_desc_eol(struct at_desc *desc)
{
- desc->lli.ctrlb |= ATC_SRC_DSCR_DIS | ATC_DST_DSCR_DIS;
+ u32 ctrlb = desc->lli.ctrlb;
+
+ ctrlb &= ~ATC_IEN;
+ ctrlb |= ATC_SRC_DSCR_DIS | ATC_DST_DSCR_DIS;
+
+ desc->lli.ctrlb = ctrlb;
desc->lli.dscr = 0;
}
--
1.7.3
More information about the linux-arm-kernel
mailing list