[PATCH v2 20/23] at91: Make high speed USB gadget device common
Ryan Mallon
ryan at bluewatersys.com
Thu Apr 21 01:42:12 EDT 2011
Replace the individual high-speed UDC code for each at91 variant with
a single implementation in devices.c
Signed-off-by: Ryan Mallon <ryan at bluewatersys.com>
---
arch/arm/mach-at91/at91cap9_devices.c | 114 ++++++------------------------
arch/arm/mach-at91/at91sam9g45_devices.c | 94 ++++---------------------
arch/arm/mach-at91/at91sam9rl_devices.c | 100 ++++----------------------
arch/arm/mach-at91/devices.c | 79 +++++++++++++++++++++
arch/arm/mach-at91/devices.h | 20 +++++
5 files changed, 150 insertions(+), 257 deletions(-)
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index e6adc98..cb12e0c 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -51,105 +51,36 @@ static struct at91_dev_table_usb_ohci device_usbh_ohci __initdata = {
* USB HS Device (Gadget)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
-
-static struct resource usba_udc_resources[] = {
- [0] = {
- .start = AT91CAP9_UDPHS_FIFO,
- .end = AT91CAP9_UDPHS_FIFO + SZ_512K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_BASE_UDPHS,
- .end = AT91CAP9_BASE_UDPHS + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = AT91CAP9_ID_UDPHS,
- .end = AT91CAP9_ID_UDPHS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
- [idx] = { \
- .name = nam, \
- .index = idx, \
- .fifo_size = maxpkt, \
- .nr_banks = maxbk, \
- .can_dma = dma, \
- .can_isoc = isoc, \
- }
-
-static struct usba_ep_data usba_udc_ep[] = {
- EP("ep0", 0, 64, 1, 0, 0),
- EP("ep1", 1, 1024, 3, 1, 1),
- EP("ep2", 2, 1024, 3, 1, 1),
- EP("ep3", 3, 1024, 2, 1, 1),
- EP("ep4", 4, 1024, 2, 1, 1),
- EP("ep5", 5, 1024, 2, 1, 0),
- EP("ep6", 6, 1024, 2, 1, 0),
- EP("ep7", 7, 1024, 2, 0, 0),
-};
-
-#undef EP
-
-/*
- * pdata doesn't have room for any endpoints, so we need to
- * append room for the ones we need right after it.
- */
-static struct {
- struct usba_platform_data pdata;
- struct usba_ep_data ep[8];
-} usba_udc_data;
-
-static struct platform_device at91_usba_udc_device = {
- .name = "atmel_usba_udc",
- .id = -1,
- .dev = {
- .platform_data = &usba_udc_data.pdata,
- },
- .resource = usba_udc_resources,
- .num_resources = ARRAY_SIZE(usba_udc_resources),
-};
-
-void __init at91_add_device_usba(struct usba_platform_data *data)
+static void at91cap9_usba_init(void)
{
if (cpu_is_at91cap9_revB()) {
irq_set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH);
at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS |
- AT91_MATRIX_UDPHS_BYPASS_LOCK);
- }
- else
+ AT91_MATRIX_UDPHS_BYPASS_LOCK);
+ } else {
at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS);
-
- /*
- * Invalid pins are 0 on AT91, but the usba driver is shared
- * with AVR32, which use negative values instead. Once/if
- * gpio_is_valid() is ported to AT91, revisit this code.
- */
- usba_udc_data.pdata.vbus_pin = -EINVAL;
- usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
- memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
-
- if (data && data->vbus_pin > 0) {
- at91_set_gpio_input(data->vbus_pin, 0);
- at91_set_deglitch(data->vbus_pin, 1);
- usba_udc_data.pdata.vbus_pin = data->vbus_pin;
}
-
- /* Pullup pin is handled internally by USB device peripheral */
-
- /* Clocks */
- at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
- at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
-
- platform_device_register(&at91_usba_udc_device);
}
-#else
-void __init at91_add_device_usba(struct usba_platform_data *data) {}
-#endif
+static struct usba_ep_data usba_udc_ep[] = {
+ AT91_UDC_HS_EP("ep0", 0, 64, 1, 0, 0),
+ AT91_UDC_HS_EP("ep1", 1, 1024, 3, 1, 1),
+ AT91_UDC_HS_EP("ep2", 2, 1024, 3, 1, 1),
+ AT91_UDC_HS_EP("ep3", 3, 1024, 2, 1, 1),
+ AT91_UDC_HS_EP("ep4", 4, 1024, 2, 1, 1),
+ AT91_UDC_HS_EP("ep5", 5, 1024, 2, 1, 0),
+ AT91_UDC_HS_EP("ep6", 6, 1024, 2, 1, 0),
+ AT91_UDC_HS_EP("ep7", 7, 1024, 2, 0, 0),
+};
+
+static struct at91_dev_table_udc_hs device_udc_hs __initdata = {
+ .fifo_base = AT91CAP9_UDPHS_FIFO,
+ .mmio_base = AT91CAP9_BASE_UDPHS,
+ .irq = AT91CAP9_ID_UDPHS,
+ .device_init = at91cap9_usba_init,
+ .endpoints = usba_udc_ep,
+ .nr_endpoints = ARRAY_SIZE(usba_udc_ep),
+};
/* --------------------------------------------------------------------
* Ethernet
@@ -480,6 +411,7 @@ static struct at91_device_table at91cap9_device_table __initdata = {
.ssc[1] = &device_ssc1,
.ac97 = &device_ac97,
.lcdc = &device_lcdc,
+ .udc_hs = &device_udc_hs,
};
void __init at91cap9_init_devices(void)
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 3627c2e..0d6b2b0 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -66,91 +66,24 @@ static struct at91_dev_table_basic_device device_usb_ehci __initdata = {
* USB HS Device (Gadget)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
-static struct resource usba_udc_resources[] = {
- [0] = {
- .start = AT91SAM9G45_UDPHS_FIFO,
- .end = AT91SAM9G45_UDPHS_FIFO + SZ_512K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9G45_BASE_UDPHS,
- .end = AT91SAM9G45_BASE_UDPHS + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = AT91SAM9G45_ID_UDPHS,
- .end = AT91SAM9G45_ID_UDPHS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
- [idx] = { \
- .name = nam, \
- .index = idx, \
- .fifo_size = maxpkt, \
- .nr_banks = maxbk, \
- .can_dma = dma, \
- .can_isoc = isoc, \
- }
-
static struct usba_ep_data usba_udc_ep[] __initdata = {
- EP("ep0", 0, 64, 1, 0, 0),
- EP("ep1", 1, 1024, 2, 1, 1),
- EP("ep2", 2, 1024, 2, 1, 1),
- EP("ep3", 3, 1024, 3, 1, 0),
- EP("ep4", 4, 1024, 3, 1, 0),
- EP("ep5", 5, 1024, 3, 1, 1),
- EP("ep6", 6, 1024, 3, 1, 1),
+ AT91_UDC_HS_EP("ep0", 0, 64, 1, 0, 0),
+ AT91_UDC_HS_EP("ep1", 1, 1024, 2, 1, 1),
+ AT91_UDC_HS_EP("ep2", 2, 1024, 2, 1, 1),
+ AT91_UDC_HS_EP("ep3", 3, 1024, 3, 1, 0),
+ AT91_UDC_HS_EP("ep4", 4, 1024, 3, 1, 0),
+ AT91_UDC_HS_EP("ep5", 5, 1024, 3, 1, 1),
+ AT91_UDC_HS_EP("ep6", 6, 1024, 3, 1, 1),
};
-#undef EP
-
-/*
- * pdata doesn't have room for any endpoints, so we need to
- * append room for the ones we need right after it.
- */
-static struct {
- struct usba_platform_data pdata;
- struct usba_ep_data ep[7];
-} usba_udc_data;
-
-static struct platform_device at91_usba_udc_device = {
- .name = "atmel_usba_udc",
- .id = -1,
- .dev = {
- .platform_data = &usba_udc_data.pdata,
- },
- .resource = usba_udc_resources,
- .num_resources = ARRAY_SIZE(usba_udc_resources),
+static struct at91_dev_table_udc_hs device_udc_hs __initdata = {
+ .fifo_base = AT91SAM9G45_UDPHS_FIFO,
+ .mmio_base = AT91SAM9G45_BASE_UDPHS,
+ .irq = AT91SAM9G45_ID_UDPHS,
+ .endpoints = usba_udc_ep,
+ .nr_endpoints = ARRAY_SIZE(usba_udc_ep),
};
-void __init at91_add_device_usba(struct usba_platform_data *data)
-{
- usba_udc_data.pdata.vbus_pin = -EINVAL;
- usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
- memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
-
- if (data && data->vbus_pin > 0) {
- at91_set_gpio_input(data->vbus_pin, 0);
- at91_set_deglitch(data->vbus_pin, 1);
- usba_udc_data.pdata.vbus_pin = data->vbus_pin;
- }
-
- /* Pullup pin is handled internally by USB device peripheral */
-
- /* Clocks */
- at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
- at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
-
- platform_device_register(&at91_usba_udc_device);
-}
-#else
-void __init at91_add_device_usba(struct usba_platform_data *data) {}
-#endif
-
-
/* --------------------------------------------------------------------
* Ethernet
* -------------------------------------------------------------------- */
@@ -543,6 +476,7 @@ static struct at91_device_table at91sam9g45_device_table __initdata = {
.lcdc = &device_lcdc,
.tsadcc = &device_tsadcc,
.hdmac = &device_hdmac,
+ .udc_hs = &device_udc_hs,
};
void __init at91sam9g45_init_devices(void)
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 2aa465b..74d4363 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -40,97 +40,24 @@ static struct at91_dev_table_hdmac device_hdmac __initdata = {
* USB HS Device (Gadget)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
-
-static struct resource usba_udc_resources[] = {
- [0] = {
- .start = AT91SAM9RL_UDPHS_FIFO,
- .end = AT91SAM9RL_UDPHS_FIFO + SZ_512K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9RL_BASE_UDPHS,
- .end = AT91SAM9RL_BASE_UDPHS + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = AT91SAM9RL_ID_UDPHS,
- .end = AT91SAM9RL_ID_UDPHS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
- [idx] = { \
- .name = nam, \
- .index = idx, \
- .fifo_size = maxpkt, \
- .nr_banks = maxbk, \
- .can_dma = dma, \
- .can_isoc = isoc, \
- }
-
static struct usba_ep_data usba_udc_ep[] __initdata = {
- EP("ep0", 0, 64, 1, 0, 0),
- EP("ep1", 1, 1024, 2, 1, 1),
- EP("ep2", 2, 1024, 2, 1, 1),
- EP("ep3", 3, 1024, 3, 1, 0),
- EP("ep4", 4, 1024, 3, 1, 0),
- EP("ep5", 5, 1024, 3, 1, 1),
- EP("ep6", 6, 1024, 3, 1, 1),
+ AT91_UDC_HS_EP("ep0", 0, 64, 1, 0, 0),
+ AT91_UDC_HS_EP("ep1", 1, 1024, 2, 1, 1),
+ AT91_UDC_HS_EP("ep2", 2, 1024, 2, 1, 1),
+ AT91_UDC_HS_EP("ep3", 3, 1024, 3, 1, 0),
+ AT91_UDC_HS_EP("ep4", 4, 1024, 3, 1, 0),
+ AT91_UDC_HS_EP("ep5", 5, 1024, 3, 1, 1),
+ AT91_UDC_HS_EP("ep6", 6, 1024, 3, 1, 1),
};
-#undef EP
-
-/*
- * pdata doesn't have room for any endpoints, so we need to
- * append room for the ones we need right after it.
- */
-static struct {
- struct usba_platform_data pdata;
- struct usba_ep_data ep[7];
-} usba_udc_data;
-
-static struct platform_device at91_usba_udc_device = {
- .name = "atmel_usba_udc",
- .id = -1,
- .dev = {
- .platform_data = &usba_udc_data.pdata,
- },
- .resource = usba_udc_resources,
- .num_resources = ARRAY_SIZE(usba_udc_resources),
+static struct at91_dev_table_udc_hs device_udc_hs __initdata = {
+ .fifo_base = AT91SAM9RL_UDPHS_FIFO,
+ .mmio_base = AT91SAM9RL_BASE_UDPHS,
+ .irq = AT91SAM9RL_ID_UDPHS,
+ .endpoints = usba_udc_ep,
+ .nr_endpoints = ARRAY_SIZE(usba_udc_ep),
};
-void __init at91_add_device_usba(struct usba_platform_data *data)
-{
- /*
- * Invalid pins are 0 on AT91, but the usba driver is shared
- * with AVR32, which use negative values instead. Once/if
- * gpio_is_valid() is ported to AT91, revisit this code.
- */
- usba_udc_data.pdata.vbus_pin = -EINVAL;
- usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
- memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
-
- if (data && data->vbus_pin > 0) {
- at91_set_gpio_input(data->vbus_pin, 0);
- at91_set_deglitch(data->vbus_pin, 1);
- usba_udc_data.pdata.vbus_pin = data->vbus_pin;
- }
-
- /* Pullup pin is handled internally by USB device peripheral */
-
- /* Clocks */
- at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
- at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
-
- platform_device_register(&at91_usba_udc_device);
-}
-#else
-void __init at91_add_device_usba(struct usba_platform_data *data) {}
-#endif
-
-
/* --------------------------------------------------------------------
* MMC / SD
* -------------------------------------------------------------------- */
@@ -419,6 +346,7 @@ static struct at91_device_table at91sam9rl_device_table __initdata = {
.lcdc = &device_lcdc,
.tsadcc = &device_tsadcc,
.hdmac = &device_hdmac,
+ .udc_hs = &device_udc_hs,
};
void __init at91sam9rl_init_devices(void)
diff --git a/arch/arm/mach-at91/devices.c b/arch/arm/mach-at91/devices.c
index e3c9661..fa8f904 100644
--- a/arch/arm/mach-at91/devices.c
+++ b/arch/arm/mach-at91/devices.c
@@ -1767,6 +1767,85 @@ static void __init at91_add_device_rtc(void)
static void __init at91_add_device_rtc(void) {}
#endif
+/* --------------------------------------------------------------------
+ * USB HS Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+static struct resource usba_udc_resources[] = {
+ [0] = {
+ .end = SZ_512K,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .end = SZ_1K,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/*
+ * pdata doesn't have room for any endpoints, so we need to
+ * append room for the ones we need right after it.
+ */
+static struct {
+ struct usba_platform_data pdata;
+ struct usba_ep_data ep[8];
+} usba_udc_data;
+
+static struct platform_device at91_usba_udc_device = {
+ .name = "atmel_usba_udc",
+ .id = -1,
+ .dev = {
+ .platform_data = &usba_udc_data.pdata,
+ },
+ .resource = usba_udc_resources,
+ .num_resources = ARRAY_SIZE(usba_udc_resources),
+};
+
+void __init at91_add_device_usba(struct usba_platform_data *data)
+{
+ struct at91_dev_table_udc_hs *info = devices->udc_hs;
+
+ BUG_ON(!info);
+ init_resource_mem(&usba_udc_resources[0], info->fifo_base);
+ init_resource_mem(&usba_udc_resources[1], info->mmio_base);
+ init_resource_irq(&usba_udc_resources[2], info->irq);
+
+ /* Custom platform initialisation */
+ if (info->device_init)
+ info->device_init();
+
+ /*
+ * Invalid pins are 0 on AT91, but the usba driver is shared
+ * with AVR32, which use negative values instead. Once/if
+ * gpio_is_valid() is ported to AT91, revisit this code.
+ */
+ usba_udc_data.pdata.vbus_pin = -EINVAL;
+ usba_udc_data.pdata.num_ep = info->nr_endpoints;
+ memcpy(usba_udc_data.ep, info->endpoints,
+ info->nr_endpoints * sizeof(struct usba_ep_data));
+
+ if (data && data->vbus_pin > 0) {
+ at91_set_gpio_input(data->vbus_pin, 0);
+ at91_set_deglitch(data->vbus_pin, 1);
+ usba_udc_data.pdata.vbus_pin = data->vbus_pin;
+ }
+
+ /* Pullup pin is handled internally by USB device peripheral */
+
+ /* Clocks */
+ at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
+ at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
+
+ platform_device_register(&at91_usba_udc_device);
+}
+#else
+void __init at91_add_device_usba(struct usba_platform_data *data) {}
+#endif
+
static int __init at91_add_standard_devices(void)
{
at91_add_device_tc();
diff --git a/arch/arm/mach-at91/devices.h b/arch/arm/mach-at91/devices.h
index 417c959..a1374fa 100644
--- a/arch/arm/mach-at91/devices.h
+++ b/arch/arm/mach-at91/devices.h
@@ -170,6 +170,25 @@ struct at91_dev_table_hdmac {
int have_slave;
};
+#define AT91_UDC_HS_EP(nam, idx, maxpkt, maxbk, dma, isoc) \
+ [idx] = { \
+ .name = nam, \
+ .index = idx, \
+ .fifo_size = maxpkt, \
+ .nr_banks = maxbk, \
+ .can_dma = dma, \
+ .can_isoc = isoc, \
+ }
+
+struct at91_dev_table_udc_hs {
+ unsigned fifo_base;
+ unsigned mmio_base;
+ int irq;
+ void (*device_init)(void);
+ struct usba_ep_data *endpoints;
+ int nr_endpoints;
+};
+
struct at91_device_table {
struct at91_dev_table_ethernet *ethernet;
struct at91_dev_table_usb_ohci *usbh_ohci;
@@ -189,6 +208,7 @@ struct at91_device_table {
struct at91_dev_table_lcdc *lcdc;
struct at91_dev_table_tsadcc *tsadcc;
struct at91_dev_table_hdmac *hdmac;
+ struct at91_dev_table_udc_hs *udc_hs;
};
extern void __init at91_init_devices(struct at91_device_table *device_table);
--
1.7.0.4
More information about the linux-arm-kernel
mailing list