[PATCH 3/3] ENGR00141558-9 MTD : add gpmi support for MX50

Huang Shijie b32955 at freescale.com
Tue Apr 26 05:10:59 EDT 2011


add the gpmi support for mx50.

Signed-off-by: Huang Shijie <b32955 at freescale.com>
---
 drivers/mtd/nand/Kconfig                   |    2 +-
 drivers/mtd/nand/gpmi-nfc/Makefile         |    4 +-
 drivers/mtd/nand/gpmi-nfc/bch-regs-mx50.h  |  567 ++++++++++++++++++
 drivers/mtd/nand/gpmi-nfc/gpmi-nfc.c       |   10 +-
 drivers/mtd/nand/gpmi-nfc/gpmi-nfc.h       |    3 +
 drivers/mtd/nand/gpmi-nfc/gpmi-regs-mx50.h |  511 ++++++++++++++++
 drivers/mtd/nand/gpmi-nfc/hal-mx50.c       |  875 ++++++++++++++++++++++++++++
 7 files changed, 1969 insertions(+), 3 deletions(-)
 create mode 100644 drivers/mtd/nand/gpmi-nfc/bch-regs-mx50.h
 create mode 100644 drivers/mtd/nand/gpmi-nfc/gpmi-regs-mx50.h
 create mode 100644 drivers/mtd/nand/gpmi-nfc/hal-mx50.c

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 25a1493..30bafd7 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -428,7 +428,7 @@ config MTD_NAND_NANDSIM
 
 config MTD_NAND_GPMI_NFC
         bool "GPMI NAND Flash Controller driver"
-        depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28)
+        depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28 || SOC_IMX50)
 	select MTD_PARTITIONS
 	select MTD_CMDLINE_PARTS
         help
diff --git a/drivers/mtd/nand/gpmi-nfc/Makefile b/drivers/mtd/nand/gpmi-nfc/Makefile
index 918fb52..2b32cf6 100644
--- a/drivers/mtd/nand/gpmi-nfc/Makefile
+++ b/drivers/mtd/nand/gpmi-nfc/Makefile
@@ -1,3 +1,5 @@
 obj-$(CONFIG_MTD_NAND_GPMI_NFC) += gpmi_nfc.o
 gpmi_nfc-objs += gpmi-nfc.o
-gpmi_nfc-objs += hal-mxs.o
+obj-$(CONFIG_SOC_IMX23) += hal-mxs.o
+obj-$(CONFIG_SOC_IMX28) += hal-mxs.o
+obj-$(CONFIG_SOC_IMX50) += hal-mx50.o
diff --git a/drivers/mtd/nand/gpmi-nfc/bch-regs-mx50.h b/drivers/mtd/nand/gpmi-nfc/bch-regs-mx50.h
new file mode 100644
index 0000000..a8687bb
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nfc/bch-regs-mx50.h
@@ -0,0 +1,567 @@
+/*
+ * Freescale BCH Register Definitions
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * This file is created by xml file. Don't Edit it.
+ *
+ * Xml Revision: 1.3
+ * Template revision: 1.3
+ */
+
+#ifndef __ARCH_ARM___BCH_H
+#define __ARCH_ARM___BCH_H
+
+
+#define HW_BCH_CTRL	(0x00000000)
+#define HW_BCH_CTRL_SET	(0x00000004)
+#define HW_BCH_CTRL_CLR	(0x00000008)
+#define HW_BCH_CTRL_TOG	(0x0000000c)
+
+#define BM_BCH_CTRL_SFTRST 0x80000000
+#define BV_BCH_CTRL_SFTRST__RUN   0x0
+#define BV_BCH_CTRL_SFTRST__RESET 0x1
+#define BM_BCH_CTRL_CLKGATE 0x40000000
+#define BV_BCH_CTRL_CLKGATE__RUN     0x0
+#define BV_BCH_CTRL_CLKGATE__NO_CLKS 0x1
+#define BP_BCH_CTRL_RSVD5      23
+#define BM_BCH_CTRL_RSVD5 0x3F800000
+#define BF_BCH_CTRL_RSVD5(v)  \
+	(((v) << 23) & BM_BCH_CTRL_RSVD5)
+#define BM_BCH_CTRL_DEBUGSYNDROME 0x00400000
+#define BP_BCH_CTRL_RSVD4      20
+#define BM_BCH_CTRL_RSVD4 0x00300000
+#define BF_BCH_CTRL_RSVD4(v)  \
+	(((v) << 20) & BM_BCH_CTRL_RSVD4)
+#define BP_BCH_CTRL_M2M_LAYOUT      18
+#define BM_BCH_CTRL_M2M_LAYOUT 0x000C0000
+#define BF_BCH_CTRL_M2M_LAYOUT(v)  \
+	(((v) << 18) & BM_BCH_CTRL_M2M_LAYOUT)
+#define BM_BCH_CTRL_M2M_ENCODE 0x00020000
+#define BM_BCH_CTRL_M2M_ENABLE 0x00010000
+#define BP_BCH_CTRL_RSVD3      11
+#define BM_BCH_CTRL_RSVD3 0x0000F800
+#define BF_BCH_CTRL_RSVD3(v)  \
+	(((v) << 11) & BM_BCH_CTRL_RSVD3)
+#define BM_BCH_CTRL_DEBUG_STALL_IRQ_EN 0x00000400
+#define BM_BCH_CTRL_RSVD2 0x00000200
+#define BM_BCH_CTRL_COMPLETE_IRQ_EN 0x00000100
+#define BP_BCH_CTRL_RSVD1      4
+#define BM_BCH_CTRL_RSVD1 0x000000F0
+#define BF_BCH_CTRL_RSVD1(v)  \
+	(((v) << 4) & BM_BCH_CTRL_RSVD1)
+#define BM_BCH_CTRL_BM_ERROR_IRQ 0x00000008
+#define BM_BCH_CTRL_DEBUG_STALL_IRQ 0x00000004
+#define BM_BCH_CTRL_RSVD0 0x00000002
+#define BM_BCH_CTRL_COMPLETE_IRQ 0x00000001
+
+#define HW_BCH_STATUS0	(0x00000010)
+
+#define BP_BCH_STATUS0_HANDLE      20
+#define BM_BCH_STATUS0_HANDLE 0xFFF00000
+#define BF_BCH_STATUS0_HANDLE(v) \
+	(((v) << 20) & BM_BCH_STATUS0_HANDLE)
+#define BP_BCH_STATUS0_COMPLETED_CE      16
+#define BM_BCH_STATUS0_COMPLETED_CE 0x000F0000
+#define BF_BCH_STATUS0_COMPLETED_CE(v)  \
+	(((v) << 16) & BM_BCH_STATUS0_COMPLETED_CE)
+#define BP_BCH_STATUS0_STATUS_BLK0      8
+#define BM_BCH_STATUS0_STATUS_BLK0 0x0000FF00
+#define BF_BCH_STATUS0_STATUS_BLK0(v)  \
+	(((v) << 8) & BM_BCH_STATUS0_STATUS_BLK0)
+#define BV_BCH_STATUS0_STATUS_BLK0__ZERO          0x00
+#define BV_BCH_STATUS0_STATUS_BLK0__ERROR1        0x01
+#define BV_BCH_STATUS0_STATUS_BLK0__ERROR2        0x02
+#define BV_BCH_STATUS0_STATUS_BLK0__ERROR3        0x03
+#define BV_BCH_STATUS0_STATUS_BLK0__ERROR4        0x04
+#define BV_BCH_STATUS0_STATUS_BLK0__UNCORRECTABLE 0xFE
+#define BV_BCH_STATUS0_STATUS_BLK0__ERASED        0xFF
+#define BP_BCH_STATUS0_RSVD1      5
+#define BM_BCH_STATUS0_RSVD1 0x000000E0
+#define BF_BCH_STATUS0_RSVD1(v)  \
+	(((v) << 5) & BM_BCH_STATUS0_RSVD1)
+#define BM_BCH_STATUS0_ALLONES 0x00000010
+#define BM_BCH_STATUS0_CORRECTED 0x00000008
+#define BM_BCH_STATUS0_UNCORRECTABLE 0x00000004
+#define BP_BCH_STATUS0_RSVD0      0
+#define BM_BCH_STATUS0_RSVD0 0x00000003
+#define BF_BCH_STATUS0_RSVD0(v)  \
+	(((v) << 0) & BM_BCH_STATUS0_RSVD0)
+
+#define HW_BCH_MODE	(0x00000020)
+
+#define BP_BCH_MODE_RSVD      8
+#define BM_BCH_MODE_RSVD 0xFFFFFF00
+#define BF_BCH_MODE_RSVD(v) \
+	(((v) << 8) & BM_BCH_MODE_RSVD)
+#define BP_BCH_MODE_ERASE_THRESHOLD      0
+#define BM_BCH_MODE_ERASE_THRESHOLD 0x000000FF
+#define BF_BCH_MODE_ERASE_THRESHOLD(v)  \
+	(((v) << 0) & BM_BCH_MODE_ERASE_THRESHOLD)
+
+#define HW_BCH_ENCODEPTR	(0x00000030)
+
+#define BP_BCH_ENCODEPTR_ADDR      0
+#define BM_BCH_ENCODEPTR_ADDR 0xFFFFFFFF
+#define BF_BCH_ENCODEPTR_ADDR(v)   (v)
+
+#define HW_BCH_DATAPTR	(0x00000040)
+
+#define BP_BCH_DATAPTR_ADDR      0
+#define BM_BCH_DATAPTR_ADDR 0xFFFFFFFF
+#define BF_BCH_DATAPTR_ADDR(v)   (v)
+
+#define HW_BCH_METAPTR	(0x00000050)
+
+#define BP_BCH_METAPTR_ADDR      0
+#define BM_BCH_METAPTR_ADDR 0xFFFFFFFF
+#define BF_BCH_METAPTR_ADDR(v)   (v)
+
+#define HW_BCH_LAYOUTSELECT	(0x00000070)
+
+#define BP_BCH_LAYOUTSELECT_CS15_SELECT      30
+#define BM_BCH_LAYOUTSELECT_CS15_SELECT 0xC0000000
+#define BF_BCH_LAYOUTSELECT_CS15_SELECT(v) \
+	(((v) << 30) & BM_BCH_LAYOUTSELECT_CS15_SELECT)
+#define BP_BCH_LAYOUTSELECT_CS14_SELECT      28
+#define BM_BCH_LAYOUTSELECT_CS14_SELECT 0x30000000
+#define BF_BCH_LAYOUTSELECT_CS14_SELECT(v)  \
+	(((v) << 28) & BM_BCH_LAYOUTSELECT_CS14_SELECT)
+#define BP_BCH_LAYOUTSELECT_CS13_SELECT      26
+#define BM_BCH_LAYOUTSELECT_CS13_SELECT 0x0C000000
+#define BF_BCH_LAYOUTSELECT_CS13_SELECT(v)  \
+	(((v) << 26) & BM_BCH_LAYOUTSELECT_CS13_SELECT)
+#define BP_BCH_LAYOUTSELECT_CS12_SELECT      24
+#define BM_BCH_LAYOUTSELECT_CS12_SELECT 0x03000000
+#define BF_BCH_LAYOUTSELECT_CS12_SELECT(v)  \
+	(((v) << 24) & BM_BCH_LAYOUTSELECT_CS12_SELECT)
+#define BP_BCH_LAYOUTSELECT_CS11_SELECT      22
+#define BM_BCH_LAYOUTSELECT_CS11_SELECT 0x00C00000
+#define BF_BCH_LAYOUTSELECT_CS11_SELECT(v)  \
+	(((v) << 22) & BM_BCH_LAYOUTSELECT_CS11_SELECT)
+#define BP_BCH_LAYOUTSELECT_CS10_SELECT      20
+#define BM_BCH_LAYOUTSELECT_CS10_SELECT 0x00300000
+#define BF_BCH_LAYOUTSELECT_CS10_SELECT(v)  \
+	(((v) << 20) & BM_BCH_LAYOUTSELECT_CS10_SELECT)
+#define BP_BCH_LAYOUTSELECT_CS9_SELECT      18
+#define BM_BCH_LAYOUTSELECT_CS9_SELECT 0x000C0000
+#define BF_BCH_LAYOUTSELECT_CS9_SELECT(v)  \
+	(((v) << 18) & BM_BCH_LAYOUTSELECT_CS9_SELECT)
+#define BP_BCH_LAYOUTSELECT_CS8_SELECT      16
+#define BM_BCH_LAYOUTSELECT_CS8_SELECT 0x00030000
+#define BF_BCH_LAYOUTSELECT_CS8_SELECT(v)  \
+	(((v) << 16) & BM_BCH_LAYOUTSELECT_CS8_SELECT)
+#define BP_BCH_LAYOUTSELECT_CS7_SELECT      14
+#define BM_BCH_LAYOUTSELECT_CS7_SELECT 0x0000C000
+#define BF_BCH_LAYOUTSELECT_CS7_SELECT(v)  \
+	(((v) << 14) & BM_BCH_LAYOUTSELECT_CS7_SELECT)
+#define BP_BCH_LAYOUTSELECT_CS6_SELECT      12
+#define BM_BCH_LAYOUTSELECT_CS6_SELECT 0x00003000
+#define BF_BCH_LAYOUTSELECT_CS6_SELECT(v)  \
+	(((v) << 12) & BM_BCH_LAYOUTSELECT_CS6_SELECT)
+#define BP_BCH_LAYOUTSELECT_CS5_SELECT      10
+#define BM_BCH_LAYOUTSELECT_CS5_SELECT 0x00000C00
+#define BF_BCH_LAYOUTSELECT_CS5_SELECT(v)  \
+	(((v) << 10) & BM_BCH_LAYOUTSELECT_CS5_SELECT)
+#define BP_BCH_LAYOUTSELECT_CS4_SELECT      8
+#define BM_BCH_LAYOUTSELECT_CS4_SELECT 0x00000300
+#define BF_BCH_LAYOUTSELECT_CS4_SELECT(v)  \
+	(((v) << 8) & BM_BCH_LAYOUTSELECT_CS4_SELECT)
+#define BP_BCH_LAYOUTSELECT_CS3_SELECT      6
+#define BM_BCH_LAYOUTSELECT_CS3_SELECT 0x000000C0
+#define BF_BCH_LAYOUTSELECT_CS3_SELECT(v)  \
+	(((v) << 6) & BM_BCH_LAYOUTSELECT_CS3_SELECT)
+#define BP_BCH_LAYOUTSELECT_CS2_SELECT      4
+#define BM_BCH_LAYOUTSELECT_CS2_SELECT 0x00000030
+#define BF_BCH_LAYOUTSELECT_CS2_SELECT(v)  \
+	(((v) << 4) & BM_BCH_LAYOUTSELECT_CS2_SELECT)
+#define BP_BCH_LAYOUTSELECT_CS1_SELECT      2
+#define BM_BCH_LAYOUTSELECT_CS1_SELECT 0x0000000C
+#define BF_BCH_LAYOUTSELECT_CS1_SELECT(v)  \
+	(((v) << 2) & BM_BCH_LAYOUTSELECT_CS1_SELECT)
+#define BP_BCH_LAYOUTSELECT_CS0_SELECT      0
+#define BM_BCH_LAYOUTSELECT_CS0_SELECT 0x00000003
+#define BF_BCH_LAYOUTSELECT_CS0_SELECT(v)  \
+	(((v) << 0) & BM_BCH_LAYOUTSELECT_CS0_SELECT)
+
+#define HW_BCH_FLASH0LAYOUT0	(0x00000080)
+
+#define BP_BCH_FLASH0LAYOUT0_NBLOCKS      24
+#define BM_BCH_FLASH0LAYOUT0_NBLOCKS 0xFF000000
+#define BF_BCH_FLASH0LAYOUT0_NBLOCKS(v) \
+	(((v) << 24) & BM_BCH_FLASH0LAYOUT0_NBLOCKS)
+#define BP_BCH_FLASH0LAYOUT0_META_SIZE      16
+#define BM_BCH_FLASH0LAYOUT0_META_SIZE 0x00FF0000
+#define BF_BCH_FLASH0LAYOUT0_META_SIZE(v)  \
+	(((v) << 16) & BM_BCH_FLASH0LAYOUT0_META_SIZE)
+#define BP_BCH_FLASH0LAYOUT0_ECC0      11
+#define BM_BCH_FLASH0LAYOUT0_ECC0 0x0000F800
+#define BF_BCH_FLASH0LAYOUT0_ECC0(v)  \
+	(((v) << 11) & BM_BCH_FLASH0LAYOUT0_ECC0)
+#define BV_BCH_FLASH0LAYOUT0_ECC0__NONE  0x0
+#define BV_BCH_FLASH0LAYOUT0_ECC0__ECC2  0x1
+#define BV_BCH_FLASH0LAYOUT0_ECC0__ECC4  0x2
+#define BV_BCH_FLASH0LAYOUT0_ECC0__ECC6  0x3
+#define BV_BCH_FLASH0LAYOUT0_ECC0__ECC8  0x4
+#define BV_BCH_FLASH0LAYOUT0_ECC0__ECC10 0x5
+#define BV_BCH_FLASH0LAYOUT0_ECC0__ECC12 0x6
+#define BV_BCH_FLASH0LAYOUT0_ECC0__ECC14 0x7
+#define BV_BCH_FLASH0LAYOUT0_ECC0__ECC16 0x8
+#define BV_BCH_FLASH0LAYOUT0_ECC0__ECC18 0x9
+#define BV_BCH_FLASH0LAYOUT0_ECC0__ECC20 0xA
+#define BV_BCH_FLASH0LAYOUT0_ECC0__ECC22 0xB
+#define BV_BCH_FLASH0LAYOUT0_ECC0__ECC24 0xC
+#define BV_BCH_FLASH0LAYOUT0_ECC0__ECC26 0xD
+#define BV_BCH_FLASH0LAYOUT0_ECC0__ECC28 0xE
+#define BV_BCH_FLASH0LAYOUT0_ECC0__ECC30 0xF
+#define BV_BCH_FLASH0LAYOUT0_ECC0__ECC32 0x10
+#define BM_BCH_FLASH0LAYOUT0_GF13_0_GF14_1 0x00000400
+#define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE      0
+#define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE 0x000003FF
+#define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v)  \
+	(((v) << 0) & BM_BCH_FLASH0LAYOUT0_DATA0_SIZE)
+
+#define HW_BCH_FLASH0LAYOUT1	(0x00000090)
+
+#define BP_BCH_FLASH0LAYOUT1_PAGE_SIZE      16
+#define BM_BCH_FLASH0LAYOUT1_PAGE_SIZE 0xFFFF0000
+#define BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(v) \
+	(((v) << 16) & BM_BCH_FLASH0LAYOUT1_PAGE_SIZE)
+#define BP_BCH_FLASH0LAYOUT1_ECCN      11
+#define BM_BCH_FLASH0LAYOUT1_ECCN 0x0000F800
+#define BF_BCH_FLASH0LAYOUT1_ECCN(v)  \
+	(((v) << 11) & BM_BCH_FLASH0LAYOUT1_ECCN)
+#define BV_BCH_FLASH0LAYOUT1_ECCN__NONE  0x0
+#define BV_BCH_FLASH0LAYOUT1_ECCN__ECC2  0x1
+#define BV_BCH_FLASH0LAYOUT1_ECCN__ECC4  0x2
+#define BV_BCH_FLASH0LAYOUT1_ECCN__ECC6  0x3
+#define BV_BCH_FLASH0LAYOUT1_ECCN__ECC8  0x4
+#define BV_BCH_FLASH0LAYOUT1_ECCN__ECC10 0x5
+#define BV_BCH_FLASH0LAYOUT1_ECCN__ECC12 0x6
+#define BV_BCH_FLASH0LAYOUT1_ECCN__ECC14 0x7
+#define BV_BCH_FLASH0LAYOUT1_ECCN__ECC16 0x8
+#define BV_BCH_FLASH0LAYOUT1_ECCN__ECC18 0x9
+#define BV_BCH_FLASH0LAYOUT1_ECCN__ECC20 0xA
+#define BV_BCH_FLASH0LAYOUT1_ECCN__ECC22 0xB
+#define BV_BCH_FLASH0LAYOUT1_ECCN__ECC24 0xC
+#define BV_BCH_FLASH0LAYOUT1_ECCN__ECC26 0xD
+#define BV_BCH_FLASH0LAYOUT1_ECCN__ECC28 0xE
+#define BV_BCH_FLASH0LAYOUT1_ECCN__ECC30 0xF
+#define BV_BCH_FLASH0LAYOUT1_ECCN__ECC32 0x10
+#define BM_BCH_FLASH0LAYOUT1_GF13_0_GF14_1 0x00000400
+#define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE      0
+#define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE 0x000003FF
+#define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v)  \
+	(((v) << 0) & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE)
+
+#define HW_BCH_FLASH1LAYOUT0	(0x000000a0)
+
+#define BP_BCH_FLASH1LAYOUT0_NBLOCKS      24
+#define BM_BCH_FLASH1LAYOUT0_NBLOCKS 0xFF000000
+#define BF_BCH_FLASH1LAYOUT0_NBLOCKS(v) \
+	(((v) << 24) & BM_BCH_FLASH1LAYOUT0_NBLOCKS)
+#define BP_BCH_FLASH1LAYOUT0_META_SIZE      16
+#define BM_BCH_FLASH1LAYOUT0_META_SIZE 0x00FF0000
+#define BF_BCH_FLASH1LAYOUT0_META_SIZE(v)  \
+	(((v) << 16) & BM_BCH_FLASH1LAYOUT0_META_SIZE)
+#define BP_BCH_FLASH1LAYOUT0_ECC0      11
+#define BM_BCH_FLASH1LAYOUT0_ECC0 0x0000F800
+#define BF_BCH_FLASH1LAYOUT0_ECC0(v)  \
+	(((v) << 11) & BM_BCH_FLASH1LAYOUT0_ECC0)
+#define BV_BCH_FLASH1LAYOUT0_ECC0__NONE  0x0
+#define BV_BCH_FLASH1LAYOUT0_ECC0__ECC2  0x1
+#define BV_BCH_FLASH1LAYOUT0_ECC0__ECC4  0x2
+#define BV_BCH_FLASH1LAYOUT0_ECC0__ECC6  0x3
+#define BV_BCH_FLASH1LAYOUT0_ECC0__ECC8  0x4
+#define BV_BCH_FLASH1LAYOUT0_ECC0__ECC10 0x5
+#define BV_BCH_FLASH1LAYOUT0_ECC0__ECC12 0x6
+#define BV_BCH_FLASH1LAYOUT0_ECC0__ECC14 0x7
+#define BV_BCH_FLASH1LAYOUT0_ECC0__ECC16 0x8
+#define BV_BCH_FLASH1LAYOUT0_ECC0__ECC18 0x9
+#define BV_BCH_FLASH1LAYOUT0_ECC0__ECC20 0xA
+#define BV_BCH_FLASH1LAYOUT0_ECC0__ECC22 0xB
+#define BV_BCH_FLASH1LAYOUT0_ECC0__ECC24 0xC
+#define BV_BCH_FLASH1LAYOUT0_ECC0__ECC26 0xD
+#define BV_BCH_FLASH1LAYOUT0_ECC0__ECC28 0xE
+#define BV_BCH_FLASH1LAYOUT0_ECC0__ECC30 0xF
+#define BV_BCH_FLASH1LAYOUT0_ECC0__ECC32 0x10
+#define BM_BCH_FLASH1LAYOUT0_GF13_0_GF14_1 0x00000400
+#define BP_BCH_FLASH1LAYOUT0_DATA0_SIZE      0
+#define BM_BCH_FLASH1LAYOUT0_DATA0_SIZE 0x000003FF
+#define BF_BCH_FLASH1LAYOUT0_DATA0_SIZE(v)  \
+	(((v) << 0) & BM_BCH_FLASH1LAYOUT0_DATA0_SIZE)
+
+#define HW_BCH_FLASH1LAYOUT1	(0x000000b0)
+
+#define BP_BCH_FLASH1LAYOUT1_PAGE_SIZE      16
+#define BM_BCH_FLASH1LAYOUT1_PAGE_SIZE 0xFFFF0000
+#define BF_BCH_FLASH1LAYOUT1_PAGE_SIZE(v) \
+	(((v) << 16) & BM_BCH_FLASH1LAYOUT1_PAGE_SIZE)
+#define BP_BCH_FLASH1LAYOUT1_ECCN      11
+#define BM_BCH_FLASH1LAYOUT1_ECCN 0x0000F800
+#define BF_BCH_FLASH1LAYOUT1_ECCN(v)  \
+	(((v) << 11) & BM_BCH_FLASH1LAYOUT1_ECCN)
+#define BV_BCH_FLASH1LAYOUT1_ECCN__NONE  0x0
+#define BV_BCH_FLASH1LAYOUT1_ECCN__ECC2  0x1
+#define BV_BCH_FLASH1LAYOUT1_ECCN__ECC4  0x2
+#define BV_BCH_FLASH1LAYOUT1_ECCN__ECC6  0x3
+#define BV_BCH_FLASH1LAYOUT1_ECCN__ECC8  0x4
+#define BV_BCH_FLASH1LAYOUT1_ECCN__ECC10 0x5
+#define BV_BCH_FLASH1LAYOUT1_ECCN__ECC12 0x6
+#define BV_BCH_FLASH1LAYOUT1_ECCN__ECC14 0x7
+#define BV_BCH_FLASH1LAYOUT1_ECCN__ECC16 0x8
+#define BV_BCH_FLASH1LAYOUT1_ECCN__ECC18 0x9
+#define BV_BCH_FLASH1LAYOUT1_ECCN__ECC20 0xA
+#define BV_BCH_FLASH1LAYOUT1_ECCN__ECC22 0xB
+#define BV_BCH_FLASH1LAYOUT1_ECCN__ECC24 0xC
+#define BV_BCH_FLASH1LAYOUT1_ECCN__ECC26 0xD
+#define BV_BCH_FLASH1LAYOUT1_ECCN__ECC28 0xE
+#define BV_BCH_FLASH1LAYOUT1_ECCN__ECC30 0xF
+#define BV_BCH_FLASH1LAYOUT1_ECCN__ECC32 0x10
+#define BM_BCH_FLASH1LAYOUT1_GF13_0_GF14_1 0x00000400
+#define BP_BCH_FLASH1LAYOUT1_DATAN_SIZE      0
+#define BM_BCH_FLASH1LAYOUT1_DATAN_SIZE 0x000003FF
+#define BF_BCH_FLASH1LAYOUT1_DATAN_SIZE(v)  \
+	(((v) << 0) & BM_BCH_FLASH1LAYOUT1_DATAN_SIZE)
+
+#define HW_BCH_FLASH2LAYOUT0	(0x000000c0)
+
+#define BP_BCH_FLASH2LAYOUT0_NBLOCKS      24
+#define BM_BCH_FLASH2LAYOUT0_NBLOCKS 0xFF000000
+#define BF_BCH_FLASH2LAYOUT0_NBLOCKS(v) \
+	(((v) << 24) & BM_BCH_FLASH2LAYOUT0_NBLOCKS)
+#define BP_BCH_FLASH2LAYOUT0_META_SIZE      16
+#define BM_BCH_FLASH2LAYOUT0_META_SIZE 0x00FF0000
+#define BF_BCH_FLASH2LAYOUT0_META_SIZE(v)  \
+	(((v) << 16) & BM_BCH_FLASH2LAYOUT0_META_SIZE)
+#define BP_BCH_FLASH2LAYOUT0_ECC0      11
+#define BM_BCH_FLASH2LAYOUT0_ECC0 0x0000F800
+#define BF_BCH_FLASH2LAYOUT0_ECC0(v)  \
+	(((v) << 11) & BM_BCH_FLASH2LAYOUT0_ECC0)
+#define BV_BCH_FLASH2LAYOUT0_ECC0__NONE  0x0
+#define BV_BCH_FLASH2LAYOUT0_ECC0__ECC2  0x1
+#define BV_BCH_FLASH2LAYOUT0_ECC0__ECC4  0x2
+#define BV_BCH_FLASH2LAYOUT0_ECC0__ECC6  0x3
+#define BV_BCH_FLASH2LAYOUT0_ECC0__ECC8  0x4
+#define BV_BCH_FLASH2LAYOUT0_ECC0__ECC10 0x5
+#define BV_BCH_FLASH2LAYOUT0_ECC0__ECC12 0x6
+#define BV_BCH_FLASH2LAYOUT0_ECC0__ECC14 0x7
+#define BV_BCH_FLASH2LAYOUT0_ECC0__ECC16 0x8
+#define BV_BCH_FLASH2LAYOUT0_ECC0__ECC18 0x9
+#define BV_BCH_FLASH2LAYOUT0_ECC0__ECC20 0xA
+#define BV_BCH_FLASH2LAYOUT0_ECC0__ECC22 0xB
+#define BV_BCH_FLASH2LAYOUT0_ECC0__ECC24 0xC
+#define BV_BCH_FLASH2LAYOUT0_ECC0__ECC26 0xD
+#define BV_BCH_FLASH2LAYOUT0_ECC0__ECC28 0xE
+#define BV_BCH_FLASH2LAYOUT0_ECC0__ECC30 0xF
+#define BV_BCH_FLASH2LAYOUT0_ECC0__ECC32 0x10
+#define BM_BCH_FLASH2LAYOUT0_GF13_0_GF14_1 0x00000400
+#define BP_BCH_FLASH2LAYOUT0_DATA0_SIZE      0
+#define BM_BCH_FLASH2LAYOUT0_DATA0_SIZE 0x000003FF
+#define BF_BCH_FLASH2LAYOUT0_DATA0_SIZE(v)  \
+	(((v) << 0) & BM_BCH_FLASH2LAYOUT0_DATA0_SIZE)
+
+#define HW_BCH_FLASH2LAYOUT1	(0x000000d0)
+
+#define BP_BCH_FLASH2LAYOUT1_PAGE_SIZE      16
+#define BM_BCH_FLASH2LAYOUT1_PAGE_SIZE 0xFFFF0000
+#define BF_BCH_FLASH2LAYOUT1_PAGE_SIZE(v) \
+	(((v) << 16) & BM_BCH_FLASH2LAYOUT1_PAGE_SIZE)
+#define BP_BCH_FLASH2LAYOUT1_ECCN      11
+#define BM_BCH_FLASH2LAYOUT1_ECCN 0x0000F800
+#define BF_BCH_FLASH2LAYOUT1_ECCN(v)  \
+	(((v) << 11) & BM_BCH_FLASH2LAYOUT1_ECCN)
+#define BV_BCH_FLASH2LAYOUT1_ECCN__NONE  0x0
+#define BV_BCH_FLASH2LAYOUT1_ECCN__ECC2  0x1
+#define BV_BCH_FLASH2LAYOUT1_ECCN__ECC4  0x2
+#define BV_BCH_FLASH2LAYOUT1_ECCN__ECC6  0x3
+#define BV_BCH_FLASH2LAYOUT1_ECCN__ECC8  0x4
+#define BV_BCH_FLASH2LAYOUT1_ECCN__ECC10 0x5
+#define BV_BCH_FLASH2LAYOUT1_ECCN__ECC12 0x6
+#define BV_BCH_FLASH2LAYOUT1_ECCN__ECC14 0x7
+#define BV_BCH_FLASH2LAYOUT1_ECCN__ECC16 0x8
+#define BV_BCH_FLASH2LAYOUT1_ECCN__ECC18 0x9
+#define BV_BCH_FLASH2LAYOUT1_ECCN__ECC20 0xA
+#define BV_BCH_FLASH2LAYOUT1_ECCN__ECC22 0xB
+#define BV_BCH_FLASH2LAYOUT1_ECCN__ECC24 0xC
+#define BV_BCH_FLASH2LAYOUT1_ECCN__ECC26 0xD
+#define BV_BCH_FLASH2LAYOUT1_ECCN__ECC28 0xE
+#define BV_BCH_FLASH2LAYOUT1_ECCN__ECC30 0xF
+#define BV_BCH_FLASH2LAYOUT1_ECCN__ECC32 0x10
+#define BM_BCH_FLASH2LAYOUT1_GF13_0_GF14_1 0x00000400
+#define BP_BCH_FLASH2LAYOUT1_DATAN_SIZE      0
+#define BM_BCH_FLASH2LAYOUT1_DATAN_SIZE 0x000003FF
+#define BF_BCH_FLASH2LAYOUT1_DATAN_SIZE(v)  \
+	(((v) << 0) & BM_BCH_FLASH2LAYOUT1_DATAN_SIZE)
+
+#define HW_BCH_FLASH3LAYOUT0	(0x000000e0)
+
+#define BP_BCH_FLASH3LAYOUT0_NBLOCKS      24
+#define BM_BCH_FLASH3LAYOUT0_NBLOCKS 0xFF000000
+#define BF_BCH_FLASH3LAYOUT0_NBLOCKS(v) \
+	(((v) << 24) & BM_BCH_FLASH3LAYOUT0_NBLOCKS)
+#define BP_BCH_FLASH3LAYOUT0_META_SIZE      16
+#define BM_BCH_FLASH3LAYOUT0_META_SIZE 0x00FF0000
+#define BF_BCH_FLASH3LAYOUT0_META_SIZE(v)  \
+	(((v) << 16) & BM_BCH_FLASH3LAYOUT0_META_SIZE)
+#define BP_BCH_FLASH3LAYOUT0_ECC0      11
+#define BM_BCH_FLASH3LAYOUT0_ECC0 0x0000F800
+#define BF_BCH_FLASH3LAYOUT0_ECC0(v)  \
+	(((v) << 11) & BM_BCH_FLASH3LAYOUT0_ECC0)
+#define BV_BCH_FLASH3LAYOUT0_ECC0__NONE  0x0
+#define BV_BCH_FLASH3LAYOUT0_ECC0__ECC2  0x1
+#define BV_BCH_FLASH3LAYOUT0_ECC0__ECC4  0x2
+#define BV_BCH_FLASH3LAYOUT0_ECC0__ECC6  0x3
+#define BV_BCH_FLASH3LAYOUT0_ECC0__ECC8  0x4
+#define BV_BCH_FLASH3LAYOUT0_ECC0__ECC10 0x5
+#define BV_BCH_FLASH3LAYOUT0_ECC0__ECC12 0x6
+#define BV_BCH_FLASH3LAYOUT0_ECC0__ECC14 0x7
+#define BV_BCH_FLASH3LAYOUT0_ECC0__ECC16 0x8
+#define BV_BCH_FLASH3LAYOUT0_ECC0__ECC18 0x9
+#define BV_BCH_FLASH3LAYOUT0_ECC0__ECC20 0xA
+#define BV_BCH_FLASH3LAYOUT0_ECC0__ECC22 0xB
+#define BV_BCH_FLASH3LAYOUT0_ECC0__ECC24 0xC
+#define BV_BCH_FLASH3LAYOUT0_ECC0__ECC26 0xD
+#define BV_BCH_FLASH3LAYOUT0_ECC0__ECC28 0xE
+#define BV_BCH_FLASH3LAYOUT0_ECC0__ECC30 0xF
+#define BV_BCH_FLASH3LAYOUT0_ECC0__ECC32 0x10
+#define BM_BCH_FLASH3LAYOUT0_GF13_0_GF14_1 0x00000400
+#define BP_BCH_FLASH3LAYOUT0_DATA0_SIZE      0
+#define BM_BCH_FLASH3LAYOUT0_DATA0_SIZE 0x000003FF
+#define BF_BCH_FLASH3LAYOUT0_DATA0_SIZE(v)  \
+	(((v) << 0) & BM_BCH_FLASH3LAYOUT0_DATA0_SIZE)
+
+#define HW_BCH_FLASH3LAYOUT1	(0x000000f0)
+
+#define BP_BCH_FLASH3LAYOUT1_PAGE_SIZE      16
+#define BM_BCH_FLASH3LAYOUT1_PAGE_SIZE 0xFFFF0000
+#define BF_BCH_FLASH3LAYOUT1_PAGE_SIZE(v) \
+	(((v) << 16) & BM_BCH_FLASH3LAYOUT1_PAGE_SIZE)
+#define BP_BCH_FLASH3LAYOUT1_ECCN      11
+#define BM_BCH_FLASH3LAYOUT1_ECCN 0x0000F800
+#define BF_BCH_FLASH3LAYOUT1_ECCN(v)  \
+	(((v) << 11) & BM_BCH_FLASH3LAYOUT1_ECCN)
+#define BV_BCH_FLASH3LAYOUT1_ECCN__NONE  0x0
+#define BV_BCH_FLASH3LAYOUT1_ECCN__ECC2  0x1
+#define BV_BCH_FLASH3LAYOUT1_ECCN__ECC4  0x2
+#define BV_BCH_FLASH3LAYOUT1_ECCN__ECC6  0x3
+#define BV_BCH_FLASH3LAYOUT1_ECCN__ECC8  0x4
+#define BV_BCH_FLASH3LAYOUT1_ECCN__ECC10 0x5
+#define BV_BCH_FLASH3LAYOUT1_ECCN__ECC12 0x6
+#define BV_BCH_FLASH3LAYOUT1_ECCN__ECC14 0x7
+#define BV_BCH_FLASH3LAYOUT1_ECCN__ECC16 0x8
+#define BV_BCH_FLASH3LAYOUT1_ECCN__ECC18 0x9
+#define BV_BCH_FLASH3LAYOUT1_ECCN__ECC20 0xA
+#define BV_BCH_FLASH3LAYOUT1_ECCN__ECC22 0xB
+#define BV_BCH_FLASH3LAYOUT1_ECCN__ECC24 0xC
+#define BV_BCH_FLASH3LAYOUT1_ECCN__ECC26 0xD
+#define BV_BCH_FLASH3LAYOUT1_ECCN__ECC28 0xE
+#define BV_BCH_FLASH3LAYOUT1_ECCN__ECC30 0xF
+#define BV_BCH_FLASH3LAYOUT1_ECCN__ECC32 0x10
+#define BM_BCH_FLASH3LAYOUT1_GF13_0_GF14_1 0x00000400
+#define BP_BCH_FLASH3LAYOUT1_DATAN_SIZE      0
+#define BM_BCH_FLASH3LAYOUT1_DATAN_SIZE 0x000003FF
+#define BF_BCH_FLASH3LAYOUT1_DATAN_SIZE(v)  \
+	(((v) << 0) & BM_BCH_FLASH3LAYOUT1_DATAN_SIZE)
+
+#define HW_BCH_DEBUG0	(0x00000100)
+#define HW_BCH_DEBUG0_SET	(0x00000104)
+#define HW_BCH_DEBUG0_CLR	(0x00000108)
+#define HW_BCH_DEBUG0_TOG	(0x0000010c)
+
+#define BP_BCH_DEBUG0_RSVD1      25
+#define BM_BCH_DEBUG0_RSVD1 0xFE000000
+#define BF_BCH_DEBUG0_RSVD1(v) \
+	(((v) << 25) & BM_BCH_DEBUG0_RSVD1)
+#define BP_BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL      16
+#define BM_BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL 0x01FF0000
+#define BF_BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL(v)  \
+	(((v) << 16) & BM_BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL)
+#define BV_BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL__NORMAL    0x0
+#define BV_BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL__TEST_MODE 0x1
+#define BM_BCH_DEBUG0_KES_DEBUG_SHIFT_SYND 0x00008000
+#define BM_BCH_DEBUG0_KES_DEBUG_PAYLOAD_FLAG 0x00004000
+#define BV_BCH_DEBUG0_KES_DEBUG_PAYLOAD_FLAG__DATA 0x1
+#define BV_BCH_DEBUG0_KES_DEBUG_PAYLOAD_FLAG__AUX  0x1
+#define BM_BCH_DEBUG0_KES_DEBUG_MODE4K 0x00002000
+#define BV_BCH_DEBUG0_KES_DEBUG_MODE4K__4k 0x1
+#define BV_BCH_DEBUG0_KES_DEBUG_MODE4K__2k 0x1
+#define BM_BCH_DEBUG0_KES_DEBUG_KICK 0x00001000
+#define BM_BCH_DEBUG0_KES_STANDALONE 0x00000800
+#define BV_BCH_DEBUG0_KES_STANDALONE__NORMAL    0x0
+#define BV_BCH_DEBUG0_KES_STANDALONE__TEST_MODE 0x1
+#define BM_BCH_DEBUG0_KES_DEBUG_STEP 0x00000400
+#define BM_BCH_DEBUG0_KES_DEBUG_STALL 0x00000200
+#define BV_BCH_DEBUG0_KES_DEBUG_STALL__NORMAL 0x0
+#define BV_BCH_DEBUG0_KES_DEBUG_STALL__WAIT   0x1
+#define BM_BCH_DEBUG0_BM_KES_TEST_BYPASS 0x00000100
+#define BV_BCH_DEBUG0_BM_KES_TEST_BYPASS__NORMAL    0x0
+#define BV_BCH_DEBUG0_BM_KES_TEST_BYPASS__TEST_MODE 0x1
+#define BP_BCH_DEBUG0_RSVD0      6
+#define BM_BCH_DEBUG0_RSVD0 0x000000C0
+#define BF_BCH_DEBUG0_RSVD0(v)  \
+	(((v) << 6) & BM_BCH_DEBUG0_RSVD0)
+#define BP_BCH_DEBUG0_DEBUG_REG_SELECT      0
+#define BM_BCH_DEBUG0_DEBUG_REG_SELECT 0x0000003F
+#define BF_BCH_DEBUG0_DEBUG_REG_SELECT(v)  \
+	(((v) << 0) & BM_BCH_DEBUG0_DEBUG_REG_SELECT)
+
+#define HW_BCH_DBGKESREAD	(0x00000110)
+
+#define BP_BCH_DBGKESREAD_VALUES      0
+#define BM_BCH_DBGKESREAD_VALUES 0xFFFFFFFF
+#define BF_BCH_DBGKESREAD_VALUES(v)   (v)
+
+#define HW_BCH_DBGCSFEREAD	(0x00000120)
+
+#define BP_BCH_DBGCSFEREAD_VALUES      0
+#define BM_BCH_DBGCSFEREAD_VALUES 0xFFFFFFFF
+#define BF_BCH_DBGCSFEREAD_VALUES(v)   (v)
+
+#define HW_BCH_DBGSYNDGENREAD	(0x00000130)
+
+#define BP_BCH_DBGSYNDGENREAD_VALUES      0
+#define BM_BCH_DBGSYNDGENREAD_VALUES 0xFFFFFFFF
+#define BF_BCH_DBGSYNDGENREAD_VALUES(v)   (v)
+
+#define HW_BCH_DBGAHBMREAD	(0x00000140)
+
+#define BP_BCH_DBGAHBMREAD_VALUES      0
+#define BM_BCH_DBGAHBMREAD_VALUES 0xFFFFFFFF
+#define BF_BCH_DBGAHBMREAD_VALUES(v)   (v)
+
+#define HW_BCH_BLOCKNAME	(0x00000150)
+
+#define BP_BCH_BLOCKNAME_NAME      0
+#define BM_BCH_BLOCKNAME_NAME 0xFFFFFFFF
+#define BF_BCH_BLOCKNAME_NAME(v)   (v)
+
+#define HW_BCH_VERSION	(0x00000160)
+
+#define BP_BCH_VERSION_MAJOR      24
+#define BM_BCH_VERSION_MAJOR 0xFF000000
+#define BF_BCH_VERSION_MAJOR(v) \
+	(((v) << 24) & BM_BCH_VERSION_MAJOR)
+#define BP_BCH_VERSION_MINOR      16
+#define BM_BCH_VERSION_MINOR 0x00FF0000
+#define BF_BCH_VERSION_MINOR(v)  \
+	(((v) << 16) & BM_BCH_VERSION_MINOR)
+#define BP_BCH_VERSION_STEP      0
+#define BM_BCH_VERSION_STEP 0x0000FFFF
+#define BF_BCH_VERSION_STEP(v)  \
+	(((v) << 0) & BM_BCH_VERSION_STEP)
+#endif /* __ARCH_ARM___BCH_H */
diff --git a/drivers/mtd/nand/gpmi-nfc/gpmi-nfc.c b/drivers/mtd/nand/gpmi-nfc/gpmi-nfc.c
index a838e8c..95972af 100644
--- a/drivers/mtd/nand/gpmi-nfc/gpmi-nfc.c
+++ b/drivers/mtd/nand/gpmi-nfc/gpmi-nfc.c
@@ -1141,9 +1141,14 @@ static int __devinit set_up_nfc_hal(struct gpmi_nfc_data *this)
 		.tRHOH_in_ns             = -1,
 	};
 
+#if defined(CONFIG_SOC_IMX23) || defined(CONFIG_SOC_IMX28)
 	if (GPMI_IS_MX23(this) || GPMI_IS_MX28(this))
 		nfc = &gpmi_nfc_hal_imx23_imx28;
-
+#endif
+#if defined(CONFIG_SOC_IMX50)
+	if (GPMI_IS_MX50(this))
+		nfc = &gpmi_nfc_hal_mx50;
+#endif
 	BUG_ON(nfc == NULL);
 	this->nfc = nfc;
 
@@ -2428,6 +2433,9 @@ static const struct platform_device_id gpmi_ids[] = {
 	}, {
 		.name = "imx28-gpmi-nfc",
 		.driver_data = IS_MX28,
+	}, {
+		.name = "imx50-gpmi-nfc",
+		.driver_data = IS_MX50,
 	}, {},
 };
 
diff --git a/drivers/mtd/nand/gpmi-nfc/gpmi-nfc.h b/drivers/mtd/nand/gpmi-nfc/gpmi-nfc.h
index 50f7baf..dfa9cd1 100644
--- a/drivers/mtd/nand/gpmi-nfc/gpmi-nfc.h
+++ b/drivers/mtd/nand/gpmi-nfc/gpmi-nfc.h
@@ -457,6 +457,7 @@ extern int start_dma_with_bch_irq(struct gpmi_nfc_data *this,
 					struct dma_async_tx_descriptor *desc);
 /* NFC HAL Structures */
 extern struct nfc_hal  gpmi_nfc_hal_imx23_imx28;
+extern struct nfc_hal  gpmi_nfc_hal_mx50;
 
 /* ONFI or TOGGLE nand */
 bool is_ddr_nand(struct gpmi_nfc_data *);
@@ -489,6 +490,8 @@ extern int gpmi_debug;
 /* Use the platform_id to distinguish different Archs. */
 #define IS_MX23			0x1
 #define IS_MX28			0x2
+#define IS_MX50			0x4
 #define GPMI_IS_MX23(x)		((x)->pdev->id_entry->driver_data == IS_MX23)
 #define GPMI_IS_MX28(x)		((x)->pdev->id_entry->driver_data == IS_MX28)
+#define GPMI_IS_MX50(x)		((x)->pdev->id_entry->driver_data == IS_MX50)
 #endif
diff --git a/drivers/mtd/nand/gpmi-nfc/gpmi-regs-mx50.h b/drivers/mtd/nand/gpmi-nfc/gpmi-regs-mx50.h
new file mode 100644
index 0000000..05986d8
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nfc/gpmi-regs-mx50.h
@@ -0,0 +1,511 @@
+/*
+ * Freescale GPMI Register Definitions
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * This file is created by xml file. Don't Edit it.
+ *
+ * Xml Revision: 1.19
+ * Template revision: 1.3
+ */
+
+#ifndef __ARCH_ARM___GPMI_H
+#define __ARCH_ARM___GPMI_H
+
+
+#define HW_GPMI_CTRL0	(0x00000000)
+#define HW_GPMI_CTRL0_SET	(0x00000004)
+#define HW_GPMI_CTRL0_CLR	(0x00000008)
+#define HW_GPMI_CTRL0_TOG	(0x0000000c)
+
+#define BM_GPMI_CTRL0_SFTRST 0x80000000
+#define BV_GPMI_CTRL0_SFTRST__RUN   0x0
+#define BV_GPMI_CTRL0_SFTRST__RESET 0x1
+#define BM_GPMI_CTRL0_CLKGATE 0x40000000
+#define BV_GPMI_CTRL0_CLKGATE__RUN     0x0
+#define BV_GPMI_CTRL0_CLKGATE__NO_CLKS 0x1
+#define BM_GPMI_CTRL0_RUN 0x20000000
+#define BV_GPMI_CTRL0_RUN__IDLE 0x0
+#define BV_GPMI_CTRL0_RUN__BUSY 0x1
+#define BM_GPMI_CTRL0_DEV_IRQ_EN 0x10000000
+#define BM_GPMI_CTRL0_LOCK_CS 0x08000000
+#define BV_GPMI_CTRL0_LOCK_CS__DISABLED 0x0
+#define BV_GPMI_CTRL0_LOCK_CS__ENABLED  0x1
+#define BM_GPMI_CTRL0_UDMA 0x04000000
+#define BV_GPMI_CTRL0_UDMA__DISABLED 0x0
+#define BV_GPMI_CTRL0_UDMA__ENABLED  0x1
+#define BP_GPMI_CTRL0_COMMAND_MODE      24
+#define BM_GPMI_CTRL0_COMMAND_MODE 0x03000000
+#define BF_GPMI_CTRL0_COMMAND_MODE(v)  \
+	(((v) << 24) & BM_GPMI_CTRL0_COMMAND_MODE)
+#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE            0x0
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ             0x1
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
+#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY   0x3
+#define BM_GPMI_CTRL0_WORD_LENGTH 0x00800000
+#define BV_GPMI_CTRL0_WORD_LENGTH__16_BIT 0x0
+#define BV_GPMI_CTRL0_WORD_LENGTH__8_BIT  0x1
+#define BP_GPMI_CTRL0_CS      20
+#define BM_GPMI_CTRL0_CS 0x00700000
+#define BF_GPMI_CTRL0_CS(v)  \
+	(((v) << 20) & BM_GPMI_CTRL0_CS)
+#define BP_GPMI_CTRL0_ADDRESS      17
+#define BM_GPMI_CTRL0_ADDRESS 0x000E0000
+#define BF_GPMI_CTRL0_ADDRESS(v)  \
+	(((v) << 17) & BM_GPMI_CTRL0_ADDRESS)
+#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA 0x0
+#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE  0x1
+#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE  0x2
+#define BM_GPMI_CTRL0_ADDRESS_INCREMENT 0x00010000
+#define BV_GPMI_CTRL0_ADDRESS_INCREMENT__DISABLED 0x0
+#define BV_GPMI_CTRL0_ADDRESS_INCREMENT__ENABLED  0x1
+#define BP_GPMI_CTRL0_XFER_COUNT      0
+#define BM_GPMI_CTRL0_XFER_COUNT 0x0000FFFF
+#define BF_GPMI_CTRL0_XFER_COUNT(v)  \
+	(((v) << 0) & BM_GPMI_CTRL0_XFER_COUNT)
+
+#define HW_GPMI_COMPARE	(0x00000010)
+
+#define BP_GPMI_COMPARE_MASK      16
+#define BM_GPMI_COMPARE_MASK 0xFFFF0000
+#define BF_GPMI_COMPARE_MASK(v) \
+	(((v) << 16) & BM_GPMI_COMPARE_MASK)
+#define BP_GPMI_COMPARE_REFERENCE      0
+#define BM_GPMI_COMPARE_REFERENCE 0x0000FFFF
+#define BF_GPMI_COMPARE_REFERENCE(v)  \
+	(((v) << 0) & BM_GPMI_COMPARE_REFERENCE)
+
+#define HW_GPMI_ECCCTRL	(0x00000020)
+#define HW_GPMI_ECCCTRL_SET	(0x00000024)
+#define HW_GPMI_ECCCTRL_CLR	(0x00000028)
+#define HW_GPMI_ECCCTRL_TOG	(0x0000002c)
+
+#define BP_GPMI_ECCCTRL_HANDLE      16
+#define BM_GPMI_ECCCTRL_HANDLE 0xFFFF0000
+#define BF_GPMI_ECCCTRL_HANDLE(v) \
+	(((v) << 16) & BM_GPMI_ECCCTRL_HANDLE)
+#define BM_GPMI_ECCCTRL_RSVD2 0x00008000
+#define BP_GPMI_ECCCTRL_ECC_CMD      13
+#define BM_GPMI_ECCCTRL_ECC_CMD 0x00006000
+#define BF_GPMI_ECCCTRL_ECC_CMD(v)  \
+	(((v) << 13) & BM_GPMI_ECCCTRL_ECC_CMD)
+#define BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE   0x0
+#define BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE   0x1
+#define BV_GPMI_ECCCTRL_ECC_CMD__RESERVE2 0x2
+#define BV_GPMI_ECCCTRL_ECC_CMD__RESERVE3 0x3
+#define BM_GPMI_ECCCTRL_ENABLE_ECC 0x00001000
+#define BV_GPMI_ECCCTRL_ENABLE_ECC__ENABLE  0x1
+#define BV_GPMI_ECCCTRL_ENABLE_ECC__DISABLE 0x0
+#define BP_GPMI_ECCCTRL_RSVD1      9
+#define BM_GPMI_ECCCTRL_RSVD1 0x00000E00
+#define BF_GPMI_ECCCTRL_RSVD1(v)  \
+	(((v) << 9) & BM_GPMI_ECCCTRL_RSVD1)
+#define BP_GPMI_ECCCTRL_BUFFER_MASK      0
+#define BM_GPMI_ECCCTRL_BUFFER_MASK 0x000001FF
+#define BF_GPMI_ECCCTRL_BUFFER_MASK(v)  \
+	(((v) << 0) & BM_GPMI_ECCCTRL_BUFFER_MASK)
+#define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY 0x100
+#define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE    0x1FF
+
+#define HW_GPMI_ECCCOUNT	(0x00000030)
+
+#define BP_GPMI_ECCCOUNT_RSVD2      16
+#define BM_GPMI_ECCCOUNT_RSVD2 0xFFFF0000
+#define BF_GPMI_ECCCOUNT_RSVD2(v) \
+	(((v) << 16) & BM_GPMI_ECCCOUNT_RSVD2)
+#define BP_GPMI_ECCCOUNT_COUNT      0
+#define BM_GPMI_ECCCOUNT_COUNT 0x0000FFFF
+#define BF_GPMI_ECCCOUNT_COUNT(v)  \
+	(((v) << 0) & BM_GPMI_ECCCOUNT_COUNT)
+
+#define HW_GPMI_PAYLOAD	(0x00000040)
+
+#define BP_GPMI_PAYLOAD_ADDRESS      2
+#define BM_GPMI_PAYLOAD_ADDRESS 0xFFFFFFFC
+#define BF_GPMI_PAYLOAD_ADDRESS(v) \
+	(((v) << 2) & BM_GPMI_PAYLOAD_ADDRESS)
+#define BP_GPMI_PAYLOAD_RSVD0      0
+#define BM_GPMI_PAYLOAD_RSVD0 0x00000003
+#define BF_GPMI_PAYLOAD_RSVD0(v)  \
+	(((v) << 0) & BM_GPMI_PAYLOAD_RSVD0)
+
+#define HW_GPMI_AUXILIARY	(0x00000050)
+
+#define BP_GPMI_AUXILIARY_ADDRESS      2
+#define BM_GPMI_AUXILIARY_ADDRESS 0xFFFFFFFC
+#define BF_GPMI_AUXILIARY_ADDRESS(v) \
+	(((v) << 2) & BM_GPMI_AUXILIARY_ADDRESS)
+#define BP_GPMI_AUXILIARY_RSVD0      0
+#define BM_GPMI_AUXILIARY_RSVD0 0x00000003
+#define BF_GPMI_AUXILIARY_RSVD0(v)  \
+	(((v) << 0) & BM_GPMI_AUXILIARY_RSVD0)
+
+#define HW_GPMI_CTRL1	(0x00000060)
+#define HW_GPMI_CTRL1_SET	(0x00000064)
+#define HW_GPMI_CTRL1_CLR	(0x00000068)
+#define HW_GPMI_CTRL1_TOG	(0x0000006c)
+
+#define BM_GPMI_CTRL1_DEV_CLK_STOP 0x80000000
+#define BM_GPMI_CTRL1_SSYNC_CLK_STOP 0x40000000
+#define BM_GPMI_CTRL1_WRITE_CLK_STOP 0x20000000
+#define BM_GPMI_CTRL1_TOGGLE_MODE 0x10000000
+#define BM_GPMI_CTRL1_GPMI_CLK_DIV2_EN 0x08000000
+#define BM_GPMI_CTRL1_UPDATE_CS 0x04000000
+#define BM_GPMI_CTRL1_SSYNCMODE 0x02000000
+#define BV_GPMI_CTRL1_SSYNCMODE__ASYNC 0x0
+#define BV_GPMI_CTRL1_SSYNCMODE__SSYNC 0x1
+#define BM_GPMI_CTRL1_DECOUPLE_CS 0x01000000
+#define BP_GPMI_CTRL1_WRN_DLY_SEL      22
+#define BM_GPMI_CTRL1_WRN_DLY_SEL 0x00C00000
+#define BF_GPMI_CTRL1_WRN_DLY_SEL(v)  \
+	(((v) << 22) & BM_GPMI_CTRL1_WRN_DLY_SEL)
+#define BM_GPMI_CTRL1_RSVD1 0x00200000
+#define BM_GPMI_CTRL1_TIMEOUT_IRQ_EN 0x00100000
+#define BM_GPMI_CTRL1_GANGED_RDYBUSY 0x00080000
+#define BM_GPMI_CTRL1_BCH_MODE 0x00040000
+#define BM_GPMI_CTRL1_DLL_ENABLE 0x00020000
+#define BP_GPMI_CTRL1_HALF_PERIOD       16
+#define BM_GPMI_CTRL1_HALF_PERIOD 0x00010000
+#define BP_GPMI_CTRL1_RDN_DELAY      12
+#define BM_GPMI_CTRL1_RDN_DELAY 0x0000F000
+#define BF_GPMI_CTRL1_RDN_DELAY(v)  \
+	(((v) << 12) & BM_GPMI_CTRL1_RDN_DELAY)
+#define BM_GPMI_CTRL1_DMA2ECC_MODE 0x00000800
+#define BM_GPMI_CTRL1_DEV_IRQ 0x00000400
+#define BM_GPMI_CTRL1_TIMEOUT_IRQ 0x00000200
+#define BM_GPMI_CTRL1_BURST_EN 0x00000100
+#define BM_GPMI_CTRL1_ABORT_WAIT_REQUEST 0x00000080
+#define BP_GPMI_CTRL1_ABORT_WAIT_FOR_READY_CHANNEL      4
+#define BM_GPMI_CTRL1_ABORT_WAIT_FOR_READY_CHANNEL 0x00000070
+#define BF_GPMI_CTRL1_ABORT_WAIT_FOR_READY_CHANNEL(v)  \
+	(((v) << 4) & BM_GPMI_CTRL1_ABORT_WAIT_FOR_READY_CHANNEL)
+#define BM_GPMI_CTRL1_DEV_RESET 0x00000008
+#define BV_GPMI_CTRL1_DEV_RESET__ENABLED  0x0
+#define BV_GPMI_CTRL1_DEV_RESET__DISABLED 0x1
+#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY 0x00000004
+#define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVELOW  0x0
+#define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVEHIGH 0x1
+#define BM_GPMI_CTRL1_CAMERA_MODE 0x00000002
+#define BM_GPMI_CTRL1_GPMI_MODE 0x00000001
+#define BV_GPMI_CTRL1_GPMI_MODE__NAND 0x0
+#define BV_GPMI_CTRL1_GPMI_MODE__ATA  0x1
+
+#define HW_GPMI_TIMING0	(0x00000070)
+
+#define BP_GPMI_TIMING0_RSVD1      24
+#define BM_GPMI_TIMING0_RSVD1 0xFF000000
+#define BF_GPMI_TIMING0_RSVD1(v) \
+	(((v) << 24) & BM_GPMI_TIMING0_RSVD1)
+#define BP_GPMI_TIMING0_ADDRESS_SETUP      16
+#define BM_GPMI_TIMING0_ADDRESS_SETUP 0x00FF0000
+#define BF_GPMI_TIMING0_ADDRESS_SETUP(v)  \
+	(((v) << 16) & BM_GPMI_TIMING0_ADDRESS_SETUP)
+#define BP_GPMI_TIMING0_DATA_HOLD      8
+#define BM_GPMI_TIMING0_DATA_HOLD 0x0000FF00
+#define BF_GPMI_TIMING0_DATA_HOLD(v)  \
+	(((v) << 8) & BM_GPMI_TIMING0_DATA_HOLD)
+#define BP_GPMI_TIMING0_DATA_SETUP      0
+#define BM_GPMI_TIMING0_DATA_SETUP 0x000000FF
+#define BF_GPMI_TIMING0_DATA_SETUP(v)  \
+	(((v) << 0) & BM_GPMI_TIMING0_DATA_SETUP)
+
+#define HW_GPMI_TIMING1	(0x00000080)
+
+#define BP_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT      16
+#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 0xFFFF0000
+#define BF_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT(v) \
+	(((v) << 16) & BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT)
+#define BP_GPMI_TIMING1_RSVD1      0
+#define BM_GPMI_TIMING1_RSVD1 0x0000FFFF
+#define BF_GPMI_TIMING1_RSVD1(v)  \
+	(((v) << 0) & BM_GPMI_TIMING1_RSVD1)
+
+#define HW_GPMI_TIMING2	(0x00000090)
+
+#define BP_GPMI_TIMING2_RSVD1      27
+#define BM_GPMI_TIMING2_RSVD1 0xF8000000
+#define BF_GPMI_TIMING2_RSVD1(v) \
+	(((v) << 27) & BM_GPMI_TIMING2_RSVD1)
+#define BP_GPMI_TIMING2_READ_LATENCY      24
+#define BM_GPMI_TIMING2_READ_LATENCY 0x07000000
+#define BF_GPMI_TIMING2_READ_LATENCY(v)  \
+	(((v) << 24) & BM_GPMI_TIMING2_READ_LATENCY)
+#define BP_GPMI_TIMING2_RSVD0      21
+#define BM_GPMI_TIMING2_RSVD0 0x00E00000
+#define BF_GPMI_TIMING2_RSVD0(v)  \
+	(((v) << 21) & BM_GPMI_TIMING2_RSVD0)
+#define BP_GPMI_TIMING2_CE_DELAY      16
+#define BM_GPMI_TIMING2_CE_DELAY 0x001F0000
+#define BF_GPMI_TIMING2_CE_DELAY(v)  \
+	(((v) << 16) & BM_GPMI_TIMING2_CE_DELAY)
+#define BP_GPMI_TIMING2_PREAMBLE_DELAY      12
+#define BM_GPMI_TIMING2_PREAMBLE_DELAY 0x0000F000
+#define BF_GPMI_TIMING2_PREAMBLE_DELAY(v)  \
+	(((v) << 12) & BM_GPMI_TIMING2_PREAMBLE_DELAY)
+#define BP_GPMI_TIMING2_POSTAMBLE_DELAY      8
+#define BM_GPMI_TIMING2_POSTAMBLE_DELAY 0x00000F00
+#define BF_GPMI_TIMING2_POSTAMBLE_DELAY(v)  \
+	(((v) << 8) & BM_GPMI_TIMING2_POSTAMBLE_DELAY)
+#define BP_GPMI_TIMING2_CMDADD_PAUSE      4
+#define BM_GPMI_TIMING2_CMDADD_PAUSE 0x000000F0
+#define BF_GPMI_TIMING2_CMDADD_PAUSE(v)  \
+	(((v) << 4) & BM_GPMI_TIMING2_CMDADD_PAUSE)
+#define BP_GPMI_TIMING2_DATA_PAUSE      0
+#define BM_GPMI_TIMING2_DATA_PAUSE 0x0000000F
+#define BF_GPMI_TIMING2_DATA_PAUSE(v)  \
+	(((v) << 0) & BM_GPMI_TIMING2_DATA_PAUSE)
+
+#define HW_GPMI_DATA	(0x000000a0)
+
+#define BP_GPMI_DATA_DATA      0
+#define BM_GPMI_DATA_DATA 0xFFFFFFFF
+#define BF_GPMI_DATA_DATA(v)   (v)
+
+#define HW_GPMI_STAT	(0x000000b0)
+
+#define BP_GPMI_STAT_READY_BUSY      24
+#define BM_GPMI_STAT_READY_BUSY 0xFF000000
+#define BF_GPMI_STAT_READY_BUSY(v) \
+	(((v) << 24) & BM_GPMI_STAT_READY_BUSY)
+#define BP_GPMI_STAT_RDY_TIMEOUT      16
+#define BM_GPMI_STAT_RDY_TIMEOUT 0x00FF0000
+#define BF_GPMI_STAT_RDY_TIMEOUT(v)  \
+	(((v) << 16) & BM_GPMI_STAT_RDY_TIMEOUT)
+#define BM_GPMI_STAT_DEV7_ERROR 0x00008000
+#define BM_GPMI_STAT_DEV6_ERROR 0x00004000
+#define BM_GPMI_STAT_DEV5_ERROR 0x00002000
+#define BM_GPMI_STAT_DEV4_ERROR 0x00001000
+#define BM_GPMI_STAT_DEV3_ERROR 0x00000800
+#define BM_GPMI_STAT_DEV2_ERROR 0x00000400
+#define BM_GPMI_STAT_DEV1_ERROR 0x00000200
+#define BM_GPMI_STAT_DEV0_ERROR 0x00000100
+#define BP_GPMI_STAT_RSVD1      5
+#define BM_GPMI_STAT_RSVD1 0x000000E0
+#define BF_GPMI_STAT_RSVD1(v)  \
+	(((v) << 5) & BM_GPMI_STAT_RSVD1)
+#define BM_GPMI_STAT_ATA_IRQ 0x00000010
+#define BM_GPMI_STAT_INVALID_BUFFER_MASK 0x00000008
+#define BM_GPMI_STAT_FIFO_EMPTY 0x00000004
+#define BV_GPMI_STAT_FIFO_EMPTY__NOT_EMPTY 0x0
+#define BV_GPMI_STAT_FIFO_EMPTY__EMPTY     0x1
+#define BM_GPMI_STAT_FIFO_FULL 0x00000002
+#define BV_GPMI_STAT_FIFO_FULL__NOT_FULL 0x0
+#define BV_GPMI_STAT_FIFO_FULL__FULL     0x1
+#define BM_GPMI_STAT_PRESENT 0x00000001
+#define BV_GPMI_STAT_PRESENT__UNAVAILABLE 0x0
+#define BV_GPMI_STAT_PRESENT__AVAILABLE   0x1
+
+#define HW_GPMI_DEBUG	(0x000000c0)
+
+#define BP_GPMI_DEBUG_WAIT_FOR_READY_END      24
+#define BM_GPMI_DEBUG_WAIT_FOR_READY_END 0xFF000000
+#define BF_GPMI_DEBUG_WAIT_FOR_READY_END(v) \
+	(((v) << 24) & BM_GPMI_DEBUG_WAIT_FOR_READY_END)
+#define BP_GPMI_DEBUG_DMA_SENSE      16
+#define BM_GPMI_DEBUG_DMA_SENSE 0x00FF0000
+#define BF_GPMI_DEBUG_DMA_SENSE(v)  \
+	(((v) << 16) & BM_GPMI_DEBUG_DMA_SENSE)
+#define BP_GPMI_DEBUG_DMAREQ      8
+#define BM_GPMI_DEBUG_DMAREQ 0x0000FF00
+#define BF_GPMI_DEBUG_DMAREQ(v)  \
+	(((v) << 8) & BM_GPMI_DEBUG_DMAREQ)
+#define BP_GPMI_DEBUG_CMD_END      0
+#define BM_GPMI_DEBUG_CMD_END 0x000000FF
+#define BF_GPMI_DEBUG_CMD_END(v)  \
+	(((v) << 0) & BM_GPMI_DEBUG_CMD_END)
+
+#define HW_GPMI_VERSION	(0x000000d0)
+
+#define BP_GPMI_VERSION_MAJOR      24
+#define BM_GPMI_VERSION_MAJOR 0xFF000000
+#define BF_GPMI_VERSION_MAJOR(v) \
+	(((v) << 24) & BM_GPMI_VERSION_MAJOR)
+#define BP_GPMI_VERSION_MINOR      16
+#define BM_GPMI_VERSION_MINOR 0x00FF0000
+#define BF_GPMI_VERSION_MINOR(v)  \
+	(((v) << 16) & BM_GPMI_VERSION_MINOR)
+#define BP_GPMI_VERSION_STEP      0
+#define BM_GPMI_VERSION_STEP 0x0000FFFF
+#define BF_GPMI_VERSION_STEP(v)  \
+	(((v) << 0) & BM_GPMI_VERSION_STEP)
+
+#define HW_GPMI_DEBUG2	(0x000000e0)
+
+#define BP_GPMI_DEBUG2_RSVD1      28
+#define BM_GPMI_DEBUG2_RSVD1 0xF0000000
+#define BF_GPMI_DEBUG2_RSVD1(v) \
+	(((v) << 28) & BM_GPMI_DEBUG2_RSVD1)
+#define BP_GPMI_DEBUG2_UDMA_STATE      24
+#define BM_GPMI_DEBUG2_UDMA_STATE 0x0F000000
+#define BF_GPMI_DEBUG2_UDMA_STATE(v)  \
+	(((v) << 24) & BM_GPMI_DEBUG2_UDMA_STATE)
+#define BM_GPMI_DEBUG2_BUSY 0x00800000
+#define BV_GPMI_DEBUG2_BUSY__DISABLED 0x0
+#define BV_GPMI_DEBUG2_BUSY__ENABLED  0x1
+#define BP_GPMI_DEBUG2_PIN_STATE      20
+#define BM_GPMI_DEBUG2_PIN_STATE 0x00700000
+#define BF_GPMI_DEBUG2_PIN_STATE(v)  \
+	(((v) << 20) & BM_GPMI_DEBUG2_PIN_STATE)
+#define BV_GPMI_DEBUG2_PIN_STATE__PSM_IDLE   0x0
+#define BV_GPMI_DEBUG2_PIN_STATE__PSM_BYTCNT 0x1
+#define BV_GPMI_DEBUG2_PIN_STATE__PSM_ADDR   0x2
+#define BV_GPMI_DEBUG2_PIN_STATE__PSM_STALL  0x3
+#define BV_GPMI_DEBUG2_PIN_STATE__PSM_STROBE 0x4
+#define BV_GPMI_DEBUG2_PIN_STATE__PSM_ATARDY 0x5
+#define BV_GPMI_DEBUG2_PIN_STATE__PSM_DHOLD  0x6
+#define BV_GPMI_DEBUG2_PIN_STATE__PSM_DONE   0x7
+#define BP_GPMI_DEBUG2_MAIN_STATE      16
+#define BM_GPMI_DEBUG2_MAIN_STATE 0x000F0000
+#define BF_GPMI_DEBUG2_MAIN_STATE(v)  \
+	(((v) << 16) & BM_GPMI_DEBUG2_MAIN_STATE)
+#define BV_GPMI_DEBUG2_MAIN_STATE__MSM_IDLE   0x0
+#define BV_GPMI_DEBUG2_MAIN_STATE__MSM_BYTCNT 0x1
+#define BV_GPMI_DEBUG2_MAIN_STATE__MSM_WAITFE 0x2
+#define BV_GPMI_DEBUG2_MAIN_STATE__MSM_WAITFR 0x3
+#define BV_GPMI_DEBUG2_MAIN_STATE__MSM_DMAREQ 0x4
+#define BV_GPMI_DEBUG2_MAIN_STATE__MSM_DMAACK 0x5
+#define BV_GPMI_DEBUG2_MAIN_STATE__MSM_WAITFF 0x6
+#define BV_GPMI_DEBUG2_MAIN_STATE__MSM_LDFIFO 0x7
+#define BV_GPMI_DEBUG2_MAIN_STATE__MSM_LDDMAR 0x8
+#define BV_GPMI_DEBUG2_MAIN_STATE__MSM_RDCMP  0x9
+#define BV_GPMI_DEBUG2_MAIN_STATE__MSM_DONE   0xA
+#define BP_GPMI_DEBUG2_SYND2GPMI_BE      12
+#define BM_GPMI_DEBUG2_SYND2GPMI_BE 0x0000F000
+#define BF_GPMI_DEBUG2_SYND2GPMI_BE(v)  \
+	(((v) << 12) & BM_GPMI_DEBUG2_SYND2GPMI_BE)
+#define BM_GPMI_DEBUG2_GPMI2SYND_VALID 0x00000800
+#define BM_GPMI_DEBUG2_GPMI2SYND_READY 0x00000400
+#define BM_GPMI_DEBUG2_SYND2GPMI_VALID 0x00000200
+#define BM_GPMI_DEBUG2_SYND2GPMI_READY 0x00000100
+#define BM_GPMI_DEBUG2_VIEW_DELAYED_RDN 0x00000080
+#define BM_GPMI_DEBUG2_UPDATE_WINDOW 0x00000040
+#define BP_GPMI_DEBUG2_RDN_TAP      0
+#define BM_GPMI_DEBUG2_RDN_TAP 0x0000003F
+#define BF_GPMI_DEBUG2_RDN_TAP(v)  \
+	(((v) << 0) & BM_GPMI_DEBUG2_RDN_TAP)
+
+#define HW_GPMI_DEBUG3	(0x000000f0)
+
+#define BP_GPMI_DEBUG3_APB_WORD_CNTR      16
+#define BM_GPMI_DEBUG3_APB_WORD_CNTR 0xFFFF0000
+#define BF_GPMI_DEBUG3_APB_WORD_CNTR(v) \
+	(((v) << 16) & BM_GPMI_DEBUG3_APB_WORD_CNTR)
+#define BP_GPMI_DEBUG3_DEV_WORD_CNTR      0
+#define BM_GPMI_DEBUG3_DEV_WORD_CNTR 0x0000FFFF
+#define BF_GPMI_DEBUG3_DEV_WORD_CNTR(v)  \
+	(((v) << 0) & BM_GPMI_DEBUG3_DEV_WORD_CNTR)
+
+#define HW_GPMI_READ_DDR_DLL_CTRL	(0x00000100)
+
+#define BP_GPMI_READ_DDR_DLL_CTRL_REF_UPDATE_INT      28
+#define BM_GPMI_READ_DDR_DLL_CTRL_REF_UPDATE_INT 0xF0000000
+#define BF_GPMI_READ_DDR_DLL_CTRL_REF_UPDATE_INT(v) \
+	(((v) << 28) & BM_GPMI_READ_DDR_DLL_CTRL_REF_UPDATE_INT)
+#define BP_GPMI_READ_DDR_DLL_CTRL_SLV_UPDATE_INT      20
+#define BM_GPMI_READ_DDR_DLL_CTRL_SLV_UPDATE_INT 0x0FF00000
+#define BF_GPMI_READ_DDR_DLL_CTRL_SLV_UPDATE_INT(v)  \
+	(((v) << 20) & BM_GPMI_READ_DDR_DLL_CTRL_SLV_UPDATE_INT)
+#define BP_GPMI_READ_DDR_DLL_CTRL_RSVD1      18
+#define BM_GPMI_READ_DDR_DLL_CTRL_RSVD1 0x000C0000
+#define BF_GPMI_READ_DDR_DLL_CTRL_RSVD1(v)  \
+	(((v) << 18) & BM_GPMI_READ_DDR_DLL_CTRL_RSVD1)
+#define BP_GPMI_READ_DDR_DLL_CTRL_SLV_OVERRIDE_VAL      10
+#define BM_GPMI_READ_DDR_DLL_CTRL_SLV_OVERRIDE_VAL 0x0003FC00
+#define BF_GPMI_READ_DDR_DLL_CTRL_SLV_OVERRIDE_VAL(v)  \
+	(((v) << 10) & BM_GPMI_READ_DDR_DLL_CTRL_SLV_OVERRIDE_VAL)
+#define BM_GPMI_READ_DDR_DLL_CTRL_SLV_OVERRIDE 0x00000200
+#define BM_GPMI_READ_DDR_DLL_CTRL_REFCLK_ON 0x00000100
+#define BM_GPMI_READ_DDR_DLL_CTRL_GATE_UPDATE 0x00000080
+#define BP_GPMI_READ_DDR_DLL_CTRL_SLV_DLY_TARGET      3
+#define BM_GPMI_READ_DDR_DLL_CTRL_SLV_DLY_TARGET 0x00000078
+#define BF_GPMI_READ_DDR_DLL_CTRL_SLV_DLY_TARGET(v)  \
+	(((v) << 3) & BM_GPMI_READ_DDR_DLL_CTRL_SLV_DLY_TARGET)
+#define BM_GPMI_READ_DDR_DLL_CTRL_SLV_FORCE_UPD 0x00000004
+#define BM_GPMI_READ_DDR_DLL_CTRL_RESET 0x00000002
+#define BM_GPMI_READ_DDR_DLL_CTRL_ENABLE 0x00000001
+
+#define HW_GPMI_WRITE_DDR_DLL_CTRL	(0x00000110)
+
+#define BP_GPMI_WRITE_DDR_DLL_CTRL_REF_UPDATE_INT      28
+#define BM_GPMI_WRITE_DDR_DLL_CTRL_REF_UPDATE_INT 0xF0000000
+#define BF_GPMI_WRITE_DDR_DLL_CTRL_REF_UPDATE_INT(v) \
+	(((v) << 28) & BM_GPMI_WRITE_DDR_DLL_CTRL_REF_UPDATE_INT)
+#define BP_GPMI_WRITE_DDR_DLL_CTRL_SLV_UPDATE_INT      20
+#define BM_GPMI_WRITE_DDR_DLL_CTRL_SLV_UPDATE_INT 0x0FF00000
+#define BF_GPMI_WRITE_DDR_DLL_CTRL_SLV_UPDATE_INT(v)  \
+	(((v) << 20) & BM_GPMI_WRITE_DDR_DLL_CTRL_SLV_UPDATE_INT)
+#define BP_GPMI_WRITE_DDR_DLL_CTRL_RSVD1      18
+#define BM_GPMI_WRITE_DDR_DLL_CTRL_RSVD1 0x000C0000
+#define BF_GPMI_WRITE_DDR_DLL_CTRL_RSVD1(v)  \
+	(((v) << 18) & BM_GPMI_WRITE_DDR_DLL_CTRL_RSVD1)
+#define BP_GPMI_WRITE_DDR_DLL_CTRL_SLV_OVERRIDE_VAL      10
+#define BM_GPMI_WRITE_DDR_DLL_CTRL_SLV_OVERRIDE_VAL 0x0003FC00
+#define BF_GPMI_WRITE_DDR_DLL_CTRL_SLV_OVERRIDE_VAL(v)  \
+	(((v) << 10) & BM_GPMI_WRITE_DDR_DLL_CTRL_SLV_OVERRIDE_VAL)
+#define BM_GPMI_WRITE_DDR_DLL_CTRL_SLV_OVERRIDE 0x00000200
+#define BM_GPMI_WRITE_DDR_DLL_CTRL_REFCLK_ON 0x00000100
+#define BM_GPMI_WRITE_DDR_DLL_CTRL_GATE_UPDATE 0x00000080
+#define BP_GPMI_WRITE_DDR_DLL_CTRL_SLV_DLY_TARGET      3
+#define BM_GPMI_WRITE_DDR_DLL_CTRL_SLV_DLY_TARGET 0x00000078
+#define BF_GPMI_WRITE_DDR_DLL_CTRL_SLV_DLY_TARGET(v)  \
+	(((v) << 3) & BM_GPMI_WRITE_DDR_DLL_CTRL_SLV_DLY_TARGET)
+#define BM_GPMI_WRITE_DDR_DLL_CTRL_SLV_FORCE_UPD 0x00000004
+#define BM_GPMI_WRITE_DDR_DLL_CTRL_RESET 0x00000002
+#define BM_GPMI_WRITE_DDR_DLL_CTRL_ENABLE 0x00000001
+
+#define HW_GPMI_READ_DDR_DLL_STS	(0x00000120)
+
+#define BP_GPMI_READ_DDR_DLL_STS_RSVD1      25
+#define BM_GPMI_READ_DDR_DLL_STS_RSVD1 0xFE000000
+#define BF_GPMI_READ_DDR_DLL_STS_RSVD1(v) \
+	(((v) << 25) & BM_GPMI_READ_DDR_DLL_STS_RSVD1)
+#define BP_GPMI_READ_DDR_DLL_STS_REF_SEL      17
+#define BM_GPMI_READ_DDR_DLL_STS_REF_SEL 0x01FE0000
+#define BF_GPMI_READ_DDR_DLL_STS_REF_SEL(v)  \
+	(((v) << 17) & BM_GPMI_READ_DDR_DLL_STS_REF_SEL)
+#define BM_GPMI_READ_DDR_DLL_STS_REF_LOCK 0x00010000
+#define BP_GPMI_READ_DDR_DLL_STS_RSVD0      9
+#define BM_GPMI_READ_DDR_DLL_STS_RSVD0 0x0000FE00
+#define BF_GPMI_READ_DDR_DLL_STS_RSVD0(v)  \
+	(((v) << 9) & BM_GPMI_READ_DDR_DLL_STS_RSVD0)
+#define BP_GPMI_READ_DDR_DLL_STS_SLV_SEL      1
+#define BM_GPMI_READ_DDR_DLL_STS_SLV_SEL 0x000001FE
+#define BF_GPMI_READ_DDR_DLL_STS_SLV_SEL(v)  \
+	(((v) << 1) & BM_GPMI_READ_DDR_DLL_STS_SLV_SEL)
+#define BM_GPMI_READ_DDR_DLL_STS_SLV_LOCK 0x00000001
+
+#define HW_GPMI_WRITE_DDR_DLL_STS	(0x00000130)
+
+#define BP_GPMI_WRITE_DDR_DLL_STS_RSVD1      25
+#define BM_GPMI_WRITE_DDR_DLL_STS_RSVD1 0xFE000000
+#define BF_GPMI_WRITE_DDR_DLL_STS_RSVD1(v) \
+	(((v) << 25) & BM_GPMI_WRITE_DDR_DLL_STS_RSVD1)
+#define BP_GPMI_WRITE_DDR_DLL_STS_REF_SEL      17
+#define BM_GPMI_WRITE_DDR_DLL_STS_REF_SEL 0x01FE0000
+#define BF_GPMI_WRITE_DDR_DLL_STS_REF_SEL(v)  \
+	(((v) << 17) & BM_GPMI_WRITE_DDR_DLL_STS_REF_SEL)
+#define BM_GPMI_WRITE_DDR_DLL_STS_REF_LOCK 0x00010000
+#define BP_GPMI_WRITE_DDR_DLL_STS_RSVD0      9
+#define BM_GPMI_WRITE_DDR_DLL_STS_RSVD0 0x0000FE00
+#define BF_GPMI_WRITE_DDR_DLL_STS_RSVD0(v)  \
+	(((v) << 9) & BM_GPMI_WRITE_DDR_DLL_STS_RSVD0)
+#define BP_GPMI_WRITE_DDR_DLL_STS_SLV_SEL      1
+#define BM_GPMI_WRITE_DDR_DLL_STS_SLV_SEL 0x000001FE
+#define BF_GPMI_WRITE_DDR_DLL_STS_SLV_SEL(v)  \
+	(((v) << 1) & BM_GPMI_WRITE_DDR_DLL_STS_SLV_SEL)
+#define BM_GPMI_WRITE_DDR_DLL_STS_SLV_LOCK 0x00000001
+#endif /* __ARCH_ARM___GPMI_H */
diff --git a/drivers/mtd/nand/gpmi-nfc/hal-mx50.c b/drivers/mtd/nand/gpmi-nfc/hal-mx50.c
new file mode 100644
index 0000000..4230e8b
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nfc/hal-mx50.c
@@ -0,0 +1,875 @@
+/*
+ * Freescale GPMI NFC NAND Flash Driver
+ *
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#include "gpmi-nfc.h"
+#include "gpmi-regs-mx50.h"
+#include "bch-regs-mx50.h"
+
+#define FEATURE_SIZE		4	/* p1, p2, p3, p4 */
+#define NAND_CMD_SET_FEATURE	0xef
+
+/*
+ * How many clocks do we need in low power mode?
+ * We try to list them :
+ *	GMPI		: gpmi_apb_clk, gpmi_io_clk
+ *	BCH		: bch_clk, bch_apb_clk
+ *	DMA(RAM)	: apbh_dma_clk, ddr_clk(RAM), ahb_max_clk(RAM)
+ *			  (APBHDMA fetches DMA descriptors from DDR
+ *			   through AHB-MAX/PL301)
+ *	NAND		:
+ *	ONFI NAND	: pll1_main_clk
+ */
+static struct clk *ddr_clk;
+static struct clk *ahb_max_clk;
+
+static void setup_ddr_timing_onfi(struct gpmi_nfc_data *this)
+{
+	uint32_t value;
+	struct resources  *resources = &this->resources;
+
+	/* set timing 2 register */
+	value = BF_GPMI_TIMING2_DATA_PAUSE(0x6)
+		| BF_GPMI_TIMING2_CMDADD_PAUSE(0x4)
+		| BF_GPMI_TIMING2_POSTAMBLE_DELAY(0x2)
+		| BF_GPMI_TIMING2_PREAMBLE_DELAY(0x4)
+		| BF_GPMI_TIMING2_CE_DELAY(0x2)
+		| BF_GPMI_TIMING2_READ_LATENCY(0x2);
+
+	__raw_writel(value, resources->gpmi_regs + HW_GPMI_TIMING2);
+
+	/* set timing 1 register */
+	__raw_writel(BF_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT(0x500),
+			resources->gpmi_regs + HW_GPMI_TIMING1);
+
+	/* Put GPMI in NAND mode, disable device reset, and make certain
+	   IRQRDY polarity is active high. */
+	value = BV_GPMI_CTRL1_GPMI_MODE__NAND
+		| BM_GPMI_CTRL1_GANGED_RDYBUSY
+		| BF_GPMI_CTRL1_WRN_DLY_SEL(0x3)
+		| (BV_GPMI_CTRL1_DEV_RESET__DISABLED << 3)
+		| (BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVEHIGH << 2);
+
+	__raw_writel(value, resources->gpmi_regs + HW_GPMI_CTRL1_SET);
+}
+
+/* This must be called in the context of enabling necessary clocks */
+static void common_ddr_init(struct resources *resources)
+{
+	uint32_t value;
+
+	/* [6] enable both write & read DDR DLLs */
+	value = BM_GPMI_READ_DDR_DLL_CTRL_REFCLK_ON |
+		BM_GPMI_READ_DDR_DLL_CTRL_ENABLE |
+		BF_GPMI_READ_DDR_DLL_CTRL_SLV_UPDATE_INT(0x2) |
+		BF_GPMI_READ_DDR_DLL_CTRL_SLV_DLY_TARGET(0x7);
+
+	__raw_writel(value, resources->gpmi_regs + HW_GPMI_READ_DDR_DLL_CTRL);
+
+	/* [7] reset read */
+	__raw_writel(value | BM_GPMI_READ_DDR_DLL_CTRL_RESET,
+			resources->gpmi_regs + HW_GPMI_READ_DDR_DLL_CTRL);
+	value = value & ~BM_GPMI_READ_DDR_DLL_CTRL_RESET;
+	__raw_writel(value, resources->gpmi_regs + HW_GPMI_READ_DDR_DLL_CTRL);
+
+	value = BM_GPMI_WRITE_DDR_DLL_CTRL_REFCLK_ON |
+		BM_GPMI_WRITE_DDR_DLL_CTRL_ENABLE    |
+		BF_GPMI_WRITE_DDR_DLL_CTRL_SLV_UPDATE_INT(0x2) |
+		BF_GPMI_WRITE_DDR_DLL_CTRL_SLV_DLY_TARGET(0x7) ,
+
+	__raw_writel(value, resources->gpmi_regs + HW_GPMI_WRITE_DDR_DLL_CTRL);
+
+	/* [8] reset write */
+	__raw_writel(value | BM_GPMI_WRITE_DDR_DLL_CTRL_RESET,
+			resources->gpmi_regs + HW_GPMI_WRITE_DDR_DLL_CTRL);
+	__raw_writel(value, resources->gpmi_regs + HW_GPMI_WRITE_DDR_DLL_CTRL);
+
+	/* [9] wait for locks for read and write  */
+	do {
+		uint32_t read_status, write_status;
+		uint32_t r_mask, w_mask;
+
+		read_status = __raw_readl(resources->gpmi_regs
+					+ HW_GPMI_READ_DDR_DLL_STS);
+		write_status = __raw_readl(resources->gpmi_regs
+					+ HW_GPMI_WRITE_DDR_DLL_STS);
+
+		r_mask = (BM_GPMI_READ_DDR_DLL_STS_REF_LOCK |
+				BM_GPMI_READ_DDR_DLL_STS_SLV_LOCK);
+		w_mask = (BM_GPMI_WRITE_DDR_DLL_STS_REF_LOCK |
+				BM_GPMI_WRITE_DDR_DLL_STS_SLV_LOCK);
+
+		if (((read_status & r_mask) == r_mask)
+			&& ((write_status & w_mask) == w_mask))
+				break;
+	} while (1);
+
+	/* [10] force update of read/write */
+	value = __raw_readl(resources->gpmi_regs + HW_GPMI_READ_DDR_DLL_CTRL);
+	__raw_writel(value | BM_GPMI_READ_DDR_DLL_CTRL_SLV_FORCE_UPD,
+			resources->gpmi_regs + HW_GPMI_READ_DDR_DLL_CTRL);
+	__raw_writel(value, resources->gpmi_regs + HW_GPMI_READ_DDR_DLL_CTRL);
+
+	value = __raw_readl(resources->gpmi_regs + HW_GPMI_WRITE_DDR_DLL_CTRL);
+	__raw_writel(value | BM_GPMI_WRITE_DDR_DLL_CTRL_SLV_FORCE_UPD,
+			resources->gpmi_regs + HW_GPMI_WRITE_DDR_DLL_CTRL);
+	__raw_writel(value, resources->gpmi_regs + HW_GPMI_WRITE_DDR_DLL_CTRL);
+
+	/* [11] set gate update */
+	value = __raw_readl(resources->gpmi_regs + HW_GPMI_READ_DDR_DLL_CTRL);
+	value |= BM_GPMI_READ_DDR_DLL_CTRL_GATE_UPDATE;
+	__raw_writel(value, resources->gpmi_regs + HW_GPMI_READ_DDR_DLL_CTRL);
+
+	value = __raw_readl(resources->gpmi_regs + HW_GPMI_WRITE_DDR_DLL_CTRL);
+	value |= BM_GPMI_WRITE_DDR_DLL_CTRL_GATE_UPDATE;
+	__raw_writel(value, resources->gpmi_regs + HW_GPMI_WRITE_DDR_DLL_CTRL);
+}
+
+static int enable_ddr_onfi(struct gpmi_nfc_data *this)
+{
+	struct resources  *resources = &this->resources;
+	struct mil *mil	= &this->mil;
+	struct nand_chip *nand = &this->mil.nand;
+	struct mtd_info	 *mtd = &mil->mtd;
+	int saved_chip_number = 0;
+	uint8_t device_feature[FEATURE_SIZE];
+	int mode = 0;/* there is 5 mode available, default is 0 */
+
+	saved_chip_number = mil->current_chip;
+	nand->select_chip(mtd, 0);
+
+	/* [0] set proper timing */
+	__raw_writel(BF_GPMI_TIMING0_ADDRESS_SETUP(0x1)
+			| BF_GPMI_TIMING0_DATA_HOLD(0x3)
+			| BF_GPMI_TIMING0_DATA_SETUP(0x3),
+			resources->gpmi_regs + HW_GPMI_TIMING0);
+
+	/* [1] send SET FEATURE commond to NAND */
+	memset(device_feature, 0, sizeof(device_feature));
+	device_feature[0] = (0x1 << 4) | (mode & 0x7);
+
+	nand->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+	nand->cmdfunc(mtd, NAND_CMD_SET_FEATURE, 1, -1);
+	nand->write_buf(mtd, device_feature, FEATURE_SIZE);
+
+	/* [2] set clk divider */
+	__raw_writel(BM_GPMI_CTRL1_GPMI_CLK_DIV2_EN,
+			resources->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+	/* [3] about the clock, pay attention! */
+	nand->select_chip(mtd, saved_chip_number);
+	{
+		struct clk *pll1;
+		pll1 = clk_get(NULL, "pll1_main_clk");
+		if (IS_ERR(pll1)) {
+			printk(KERN_INFO "No PLL1 clock\n");
+			return -EINVAL;
+		}
+		clk_set_parent(resources->clock, pll1);
+		clk_set_rate(resources->clock, 20000000);
+	}
+	nand->select_chip(mtd, 0);
+
+	/* [4] setup timing */
+	setup_ddr_timing_onfi(this);
+
+	/* [5] set to SYNC mode */
+	__raw_writel(BM_GPMI_CTRL1_TOGGLE_MODE,
+			    resources->gpmi_regs + HW_GPMI_CTRL1_CLR);
+	__raw_writel(BM_GPMI_CTRL1_SSYNCMODE | BM_GPMI_CTRL1_GANGED_RDYBUSY,
+			    resources->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+	/* common DDR initialization */
+	common_ddr_init(resources);
+
+	nand->select_chip(mtd, saved_chip_number);
+
+	printk(KERN_INFO "Micron ONFI NAND enters synchronous mode %d\n", mode);
+	return 0;
+}
+
+static void setup_ddr_timing_toggle(struct gpmi_nfc_data *this)
+{
+	uint32_t value;
+	struct resources  *resources = &this->resources;
+
+	/* set timing 2 register */
+	value = BF_GPMI_TIMING2_DATA_PAUSE(0x6)
+		| BF_GPMI_TIMING2_CMDADD_PAUSE(0x4)
+		| BF_GPMI_TIMING2_POSTAMBLE_DELAY(0x3)
+		| BF_GPMI_TIMING2_PREAMBLE_DELAY(0x2)
+		| BF_GPMI_TIMING2_CE_DELAY(0x2)
+		| BF_GPMI_TIMING2_READ_LATENCY(0x2);
+
+	__raw_writel(value, resources->gpmi_regs + HW_GPMI_TIMING2);
+
+	/* set timing 1 register */
+	__raw_writel(BF_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT(0x500),
+			resources->gpmi_regs + HW_GPMI_TIMING1);
+
+	/* Put GPMI in NAND mode, disable device reset, and make certain
+	   IRQRDY polarity is active high. */
+	value = BV_GPMI_CTRL1_GPMI_MODE__NAND
+		| BM_GPMI_CTRL1_GANGED_RDYBUSY
+		| (BV_GPMI_CTRL1_DEV_RESET__DISABLED << 3)
+		| (BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVEHIGH << 2);
+
+	__raw_writel(value, resources->gpmi_regs + HW_GPMI_CTRL1_SET);
+}
+
+static int enable_ddr_toggle(struct gpmi_nfc_data *this)
+{
+	struct resources  *resources = &this->resources;
+	struct mil *mil	= &this->mil;
+	struct nand_chip *nand = &this->mil.nand;
+	struct mtd_info	 *mtd = &mil->mtd;
+	int saved_chip_number = mil->current_chip;
+
+	nand->select_chip(mtd, 0);
+
+	/* [0] set proper timing */
+	__raw_writel(BF_GPMI_TIMING0_ADDRESS_SETUP(0x5)
+			| BF_GPMI_TIMING0_DATA_HOLD(0xa)
+			| BF_GPMI_TIMING0_DATA_SETUP(0xa),
+			resources->gpmi_regs + HW_GPMI_TIMING0);
+
+	/* [2] set clk divider */
+	__raw_writel(BM_GPMI_CTRL1_GPMI_CLK_DIV2_EN,
+			resources->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+	/* [3] about the clock, pay attention! */
+	nand->select_chip(mtd, saved_chip_number);
+	{
+		struct clk *pll1;
+		unsigned long rate;
+
+		pll1 = clk_get(NULL, "pll1_main_clk");
+		if (IS_ERR(pll1)) {
+			printk(KERN_INFO "No PLL1 clock\n");
+			return -EINVAL;
+		}
+
+		/* toggle nand : 133/66 MHz */
+		rate = 33000000;
+		clk_set_parent(resources->clock, pll1);
+		clk_set_rate(resources->clock, rate);
+	}
+	nand->select_chip(mtd, 0);
+
+	/* [4] setup timing */
+	setup_ddr_timing_toggle(this);
+
+	/* [5] set to TOGGLE mode */
+	__raw_writel(BM_GPMI_CTRL1_SSYNCMODE,
+			    resources->gpmi_regs + HW_GPMI_CTRL1_CLR);
+	__raw_writel(BM_GPMI_CTRL1_TOGGLE_MODE | BM_GPMI_CTRL1_GANGED_RDYBUSY,
+			    resources->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+	/* common DDR initialization */
+	common_ddr_init(resources);
+
+	nand->select_chip(mtd, saved_chip_number);
+
+	printk(KERN_INFO "-- Sumsung TOGGLE NAND is enabled now. --\n");
+	return 0;
+}
+
+static inline bool is_board_support_ddr(struct gpmi_nfc_data *this)
+{
+	/* Only arm2 board supports the DDR, the rdp board does not. */
+	return false;
+}
+
+/* To check if we need to initialize something else*/
+static int extra_init(struct gpmi_nfc_data *this)
+{
+	ddr_clk = clk_get(NULL, "ddr_clk");
+	if (IS_ERR(ddr_clk)) {
+		printk(KERN_ERR "The ddr clock is gone!");
+		ddr_clk = NULL;
+		return -ENOENT;
+	}
+
+	ahb_max_clk = clk_get(NULL, "ahb_max_clk");
+	if (IS_ERR(ahb_max_clk)) {
+		printk(KERN_ERR "The APBH_DMA clock is gone!");
+		ahb_max_clk = NULL;
+		return -ENOENT;
+	}
+
+	if (is_board_support_ddr(this)) {
+		if (0)
+			return enable_ddr_onfi(this);
+		if (0)
+			return enable_ddr_toggle(this);
+	}
+	return 0;
+}
+
+/**
+ * init() - Initializes the NFC hardware.
+ *
+ * @this:  Per-device data.
+ */
+static int init(struct gpmi_nfc_data *this)
+{
+	struct resources  *resources = &this->resources;
+
+	/* Enable the clock. */
+	clk_enable(resources->clock);
+
+	/* Reset the GPMI block. */
+	mxs_reset_block(resources->gpmi_regs + HW_GPMI_CTRL0, true);
+
+	/* Choose NAND mode. */
+	__raw_writel(BM_GPMI_CTRL1_GPMI_MODE,
+				resources->gpmi_regs + HW_GPMI_CTRL1_CLR);
+
+	/* Set the IRQ polarity. */
+	__raw_writel(BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY,
+				resources->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+	/* Disable write protection. */
+	__raw_writel(BM_GPMI_CTRL1_DEV_RESET,
+				resources->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+	/* Select BCH ECC. */
+	__raw_writel(BM_GPMI_CTRL1_BCH_MODE,
+				resources->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+	/* Disable the clock. */
+	clk_disable(resources->clock);
+
+	return 0;
+}
+
+/**
+ * set_geometry() - Configures the NFC geometry.
+ *
+ * @this:  Per-device data.
+ */
+static int set_geometry(struct gpmi_nfc_data *this)
+{
+	struct resources     *resources = &this->resources;
+	struct nfc_geometry  *nfc       = &this->nfc_geometry;
+	unsigned int         block_count;
+	unsigned int         block_size;
+	unsigned int         metadata_size;
+	unsigned int         ecc_strength;
+	unsigned int         page_size;
+	uint32_t		value;
+
+	/* We make the abstract choices in a common function. */
+	if (common_nfc_set_geometry(this))
+		return !0;
+
+	/* Translate the abstract choices into register fields. */
+	block_count   = nfc->ecc_chunk_count - 1;
+	block_size    = nfc->ecc_chunk_size_in_bytes >> 2;
+	metadata_size = nfc->metadata_size_in_bytes;
+	ecc_strength  = nfc->ecc_strength >> 1;
+	page_size     = nfc->page_size_in_bytes;
+
+	/* Enable the clock. */
+	clk_enable(resources->clock);
+
+	/*
+	 * Reset the BCH block. Notice that we pass in true for the just_enable
+	 * flag. This is because the soft reset for the version 0 BCH block
+	 * doesn't work and the version 1 BCH block is similar enough that we
+	 * suspect the same (though this has not been officially tested). If you
+	 * try to soft reset a version 0 BCH block, it becomes unusable until
+	 * the next hard reset.
+	 */
+	mxs_reset_block(resources->bch_regs, false);
+
+	/* Configure layout 0. */
+	value = BF_BCH_FLASH0LAYOUT0_NBLOCKS(block_count)     |
+		BF_BCH_FLASH0LAYOUT0_META_SIZE(metadata_size) |
+		BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength)       |
+		BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(block_size);
+	if (is_ddr_nand(this))
+		value |= BM_BCH_FLASH0LAYOUT0_GF13_0_GF14_1;
+
+	__raw_writel(value, resources->bch_regs + HW_BCH_FLASH0LAYOUT0);
+
+	value = BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size)   |
+		BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength)     |
+		BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size);
+	if (is_ddr_nand(this))
+		value |= BM_BCH_FLASH0LAYOUT1_GF13_0_GF14_1;
+
+	__raw_writel(value, resources->bch_regs + HW_BCH_FLASH0LAYOUT1);
+
+	/* Set *all* chip selects to use layout 0. */
+	__raw_writel(0, resources->bch_regs + HW_BCH_LAYOUTSELECT);
+
+	/* Enable interrupts. */
+	__raw_writel(BM_BCH_CTRL_COMPLETE_IRQ_EN,
+				resources->bch_regs + HW_BCH_CTRL_SET);
+
+	/* Disable the clock. */
+	clk_disable(resources->clock);
+
+	return 0;
+}
+
+/**
+ * set_timing() - Configures the NFC timing.
+ *
+ * @this:    Per-device data.
+ * @timing:  The timing of interest.
+ */
+static int set_timing(struct gpmi_nfc_data *this,
+			const struct nand_timing *timing)
+{
+	struct nfc_hal *nfc = this->nfc;
+
+	/* Accept the new timing. */
+	nfc->timing = *timing;
+	return 0;
+}
+
+/**
+ * get_timing() - Retrieves the NFC hardware timing.
+ *
+ * @this:                    Per-device data.
+ * @clock_frequency_in_hz:   The clock frequency, in Hz, during the current
+ *                           I/O transaction. If no I/O transaction is in
+ *                           progress, this is the clock frequency during the
+ *                           most recent I/O transaction.
+ * @hardware_timing:         The hardware timing configuration in effect during
+ *                           the current I/O transaction. If no I/O transaction
+ *                           is in progress, this is the hardware timing
+ *                           configuration during the most recent I/O
+ *                           transaction.
+ */
+static void get_timing(struct gpmi_nfc_data *this,
+			unsigned long *clock_frequency_in_hz,
+			struct gpmi_nfc_hardware_timing *hardware_timing)
+{
+	struct resources                 *resources = &this->resources;
+	struct nfc_hal                   *nfc       =  this->nfc;
+	unsigned char                    *gpmi_regs = resources->gpmi_regs;
+	uint32_t                         register_image;
+
+	/* Return the clock frequency. */
+	*clock_frequency_in_hz = nfc->clock_frequency_in_hz;
+
+	/* We'll be reading the hardware, so let's enable the clock. */
+	clk_enable(resources->clock);
+
+	/* Retrieve the hardware timing. */
+	register_image = __raw_readl(gpmi_regs + HW_GPMI_TIMING0);
+
+	hardware_timing->data_setup_in_cycles =
+		(register_image & BM_GPMI_TIMING0_DATA_SETUP) >>
+						BP_GPMI_TIMING0_DATA_SETUP;
+
+	hardware_timing->data_hold_in_cycles =
+		(register_image & BM_GPMI_TIMING0_DATA_HOLD) >>
+						BP_GPMI_TIMING0_DATA_HOLD;
+
+	hardware_timing->address_setup_in_cycles =
+		(register_image & BM_GPMI_TIMING0_ADDRESS_SETUP) >>
+						BP_GPMI_TIMING0_ADDRESS_SETUP;
+
+	register_image = __raw_readl(gpmi_regs + HW_GPMI_CTRL1);
+
+	hardware_timing->use_half_periods =
+		(register_image & BM_GPMI_CTRL1_HALF_PERIOD) >>
+						BP_GPMI_CTRL1_HALF_PERIOD;
+
+	hardware_timing->sample_delay_factor =
+		(register_image & BM_GPMI_CTRL1_RDN_DELAY) >>
+						BP_GPMI_CTRL1_RDN_DELAY;
+
+	/* We're done reading the hardware, so disable the clock. */
+	clk_disable(resources->clock);
+}
+
+static void exit(struct gpmi_nfc_data *this)
+{
+}
+
+static void begin(struct gpmi_nfc_data *this)
+{
+	struct resources                 *resources = &this->resources;
+	struct nfc_hal                   *nfc       =  this->nfc;
+	struct gpmi_nfc_hardware_timing  hw;
+
+	/* Enable the clock. */
+	if (ddr_clk)
+		clk_enable(ddr_clk);
+	if (ahb_max_clk)
+		clk_enable(ahb_max_clk);
+	clk_enable(resources->clock);
+
+	/* Get the timing information we need. */
+	nfc->clock_frequency_in_hz = clk_get_rate(resources->clock);
+	gpmi_nfc_compute_hardware_timing(this, &hw);
+
+	/* Apply the hardware timing. */
+
+	/* Coming soon - the clock handling code isn't ready yet. */
+
+}
+
+/**
+ * end() - End NFC I/O.
+ *
+ * @this:  Per-device data.
+ */
+static void end(struct gpmi_nfc_data *this)
+{
+	struct resources  *resources = &this->resources;
+
+	clk_disable(resources->clock);
+	if (ahb_max_clk)
+		clk_disable(ahb_max_clk);
+	if (ddr_clk)
+		clk_disable(ddr_clk);
+}
+
+/**
+ * clear_bch() - Clears a BCH interrupt.
+ *
+ * @this:  Per-device data.
+ */
+static void clear_bch(struct gpmi_nfc_data *this)
+{
+	struct resources  *resources = &this->resources;
+	__raw_writel(BM_BCH_CTRL_COMPLETE_IRQ,
+				resources->bch_regs + HW_BCH_CTRL_CLR);
+}
+
+/**
+ * is_ready() - Returns the ready/busy status of the given chip.
+ *
+ * @this:  Per-device data.
+ * @chip:  The chip of interest.
+ */
+static int is_ready(struct gpmi_nfc_data *this, unsigned chip)
+{
+	struct resources  *resources = &this->resources;
+	uint32_t          mask;
+	uint32_t          register_image;
+
+	/* Extract and return the status. */
+	mask = BF_GPMI_STAT_READY_BUSY(1 << 0);
+	register_image = __raw_readl(resources->gpmi_regs + HW_GPMI_STAT);
+	return !!(register_image & mask);
+}
+
+/* The DMA may need the NAND-LOCK bit set to work properly. */
+static int send_command(struct gpmi_nfc_data *this)
+{
+	struct dma_chan *channel = get_dma_chan(this);
+	struct mil *mil	= &this->mil;
+	struct dma_async_tx_descriptor *desc;
+	struct scatterlist *sgl;
+	u32 pio[3];
+
+	/* [1] send out the PIO words */
+	pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__WRITE)
+		| BM_GPMI_CTRL0_WORD_LENGTH
+		| BF_GPMI_CTRL0_CS(mil->current_chip)
+		| BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_CLE)
+		| BM_GPMI_CTRL0_ADDRESS_INCREMENT
+		| BF_GPMI_CTRL0_XFER_COUNT(mil->command_length);
+	pio[1] = pio[2] = 0;
+	desc = channel->device->device_prep_slave_sg(channel,
+					(struct scatterlist *)pio,
+					ARRAY_SIZE(pio), DMA_NONE, 0);
+	if (!desc) {
+		pr_info("step 1 error");
+		return -1;
+	}
+
+	/* [2] send out the COMMAND + ADDRESS string stored in @buffer */
+	sgl = &mil->cmd_sgl;
+
+	sg_init_one(sgl, mil->cmd_buffer, mil->command_length);
+	dma_map_sg(this->dev, sgl, 1, DMA_TO_DEVICE);
+	desc = channel->device->device_prep_slave_sg(channel,
+					sgl, 1, DMA_TO_DEVICE, 1);
+	if (!desc) {
+		pr_info("error");
+		return -1;
+	}
+
+	/* [3] submit the DMA */
+	this->dma_type = DMA_FOR_COMMAND;
+	start_dma_without_bch_irq(this, desc);
+	return 0;
+}
+
+static int send_data(struct gpmi_nfc_data *this)
+{
+	struct dma_async_tx_descriptor *desc;
+	struct dma_chan *channel = get_dma_chan(this);
+	struct mil *mil	= &this->mil;
+	uint32_t command_mode;
+	uint32_t address;
+	u32 pio[2];
+
+	/* [1] PIO */
+	command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WRITE;
+	address      = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+
+	pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+		| BM_GPMI_CTRL0_WORD_LENGTH
+		| BF_GPMI_CTRL0_CS(mil->current_chip)
+		| BF_GPMI_CTRL0_ADDRESS(address)
+		| BF_GPMI_CTRL0_XFER_COUNT(mil->upper_len);
+	pio[1] = 0;
+	desc = channel->device->device_prep_slave_sg(channel,
+					(struct scatterlist *)pio,
+					ARRAY_SIZE(pio), DMA_NONE, 0);
+	if (!desc) {
+		pr_info("step 1 error");
+		return -1;
+	}
+
+	/* [2]  send DMA request */
+	prepare_data_dma(this, DMA_TO_DEVICE);
+	desc = channel->device->device_prep_slave_sg(channel, &mil->data_sgl,
+						1, DMA_TO_DEVICE, 1);
+	if (!desc) {
+		pr_info("step 2 error");
+		return -1;
+	}
+	/* [3] submit the DMA */
+	this->dma_type = DMA_FOR_WRITE_DATA;
+	start_dma_without_bch_irq(this, desc);
+	return 0;
+}
+
+static int read_data(struct gpmi_nfc_data *this)
+{
+	struct dma_async_tx_descriptor *desc;
+	struct dma_chan *channel = get_dma_chan(this);
+	struct mil *mil = &this->mil;
+	u32 pio[2];
+
+	/* [1] : send PIO */
+	pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__READ)
+		| BM_GPMI_CTRL0_WORD_LENGTH
+		| BF_GPMI_CTRL0_CS(mil->current_chip)
+		| BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_DATA)
+		| BF_GPMI_CTRL0_XFER_COUNT(mil->upper_len);
+	pio[1] = 0;
+	desc = channel->device->device_prep_slave_sg(channel,
+					(struct scatterlist *)pio,
+					ARRAY_SIZE(pio), DMA_NONE, 0);
+	if (!desc) {
+		pr_info("step 1 error");
+		return -1;
+	}
+
+	/* [2] : send DMA request */
+	prepare_data_dma(this, DMA_FROM_DEVICE);
+	desc = channel->device->device_prep_slave_sg(channel, &mil->data_sgl,
+						1, DMA_FROM_DEVICE, 1);
+	if (!desc) {
+		pr_info("step 2 error");
+		return -1;
+	}
+
+	/* [3] : submit the DMA */
+	this->dma_type = DMA_FOR_READ_DATA;
+	start_dma_without_bch_irq(this, desc);
+	return 0;
+}
+
+static int send_page(struct gpmi_nfc_data *this,
+			dma_addr_t payload, dma_addr_t auxiliary)
+{
+	struct nfc_geometry *geo = &this->nfc_geometry;
+	uint32_t command_mode;
+	uint32_t address;
+	uint32_t ecc_command;
+	uint32_t buffer_mask;
+	uint32_t busw;
+	uint32_t page_size;
+	struct dma_async_tx_descriptor *desc;
+	struct dma_chan *channel = get_dma_chan(this);
+	struct mil *mil = &this->mil;
+	int chip = mil->current_chip;
+	u32 pio[6];
+
+	/* DDR use the 16-bit for DATA transmission! */
+	if (is_board_support_ddr(this) && is_ddr_nand(this)) {
+		busw		= BV_GPMI_CTRL0_WORD_LENGTH__16_BIT;
+		page_size	= geo->page_size_in_bytes >> 1;
+	} else {
+		busw		= BM_GPMI_CTRL0_WORD_LENGTH;
+		page_size	= geo->page_size_in_bytes;
+	}
+
+	/* A DMA descriptor that does an ECC page read. */
+	command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WRITE;
+	address      = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+	ecc_command  = BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE;
+	buffer_mask  = BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE |
+				BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY;
+
+	pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+		| busw
+		| BF_GPMI_CTRL0_CS(chip)
+		| BF_GPMI_CTRL0_ADDRESS(address)
+		| BF_GPMI_CTRL0_XFER_COUNT(0);
+	pio[1] = 0;
+	pio[2] = BM_GPMI_ECCCTRL_ENABLE_ECC
+		| BF_GPMI_ECCCTRL_ECC_CMD(ecc_command)
+		| BF_GPMI_ECCCTRL_BUFFER_MASK(buffer_mask);
+	pio[3] = page_size;
+	pio[4] = payload;
+	pio[5] = auxiliary;
+
+	desc = channel->device->device_prep_slave_sg(channel,
+					(struct scatterlist *)pio,
+					ARRAY_SIZE(pio), DMA_NONE, 0);
+	if (!desc) {
+		pr_info("step 2 error");
+		return -1;
+	}
+	this->dma_type = DMA_FOR_WRITE_ECC_PAGE;
+	return start_dma_with_bch_irq(this, desc);
+}
+
+static int read_page(struct gpmi_nfc_data *this,
+				dma_addr_t payload, dma_addr_t auxiliary)
+{
+	struct nfc_geometry *geo = &this->nfc_geometry;
+	uint32_t command_mode;
+	uint32_t address;
+	uint32_t ecc_command;
+	uint32_t buffer_mask;
+	uint32_t page_size;
+	uint32_t busw;
+	struct dma_async_tx_descriptor *desc;
+	struct dma_chan *channel = get_dma_chan(this);
+	struct mil *mil = &this->mil;
+	int chip = mil->current_chip;
+	u32 pio[6];
+
+	/* DDR use the 16-bit for DATA transmission! */
+	if (is_board_support_ddr(this) && is_ddr_nand(this)) {
+		busw		= BV_GPMI_CTRL0_WORD_LENGTH__16_BIT;
+		page_size	= geo->page_size_in_bytes >> 1;
+	} else {
+		busw		= BM_GPMI_CTRL0_WORD_LENGTH;
+		page_size	= geo->page_size_in_bytes;
+	}
+
+	/* [1] Wait for the chip to report ready. */
+	command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY;
+	address      = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+
+	pio[0] =  BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+		| busw
+		| BF_GPMI_CTRL0_CS(chip)
+		| BF_GPMI_CTRL0_ADDRESS(address)
+		| BF_GPMI_CTRL0_XFER_COUNT(0);
+	pio[1] = 0;
+	desc = channel->device->device_prep_slave_sg(channel,
+				(struct scatterlist *)pio, 2, DMA_NONE, 0);
+	if (!desc) {
+		pr_info("step 1 error");
+		return -1;
+	}
+
+	/* [2] Enable the BCH block and read. */
+	command_mode = BV_GPMI_CTRL0_COMMAND_MODE__READ;
+	address      = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+	ecc_command  = BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE;
+	buffer_mask  = BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE
+			| BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY;
+
+	pio[0] =  BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+		| busw
+		| BF_GPMI_CTRL0_CS(chip)
+		| BF_GPMI_CTRL0_ADDRESS(address)
+		| BF_GPMI_CTRL0_XFER_COUNT(page_size);
+
+	pio[1] = 0;
+	pio[2] =  BM_GPMI_ECCCTRL_ENABLE_ECC
+		| BF_GPMI_ECCCTRL_ECC_CMD(ecc_command)
+		| BF_GPMI_ECCCTRL_BUFFER_MASK(buffer_mask);
+	pio[3] = page_size;
+	pio[4] = payload;
+	pio[5] = auxiliary;
+	desc = channel->device->device_prep_slave_sg(channel,
+					(struct scatterlist *)pio,
+					ARRAY_SIZE(pio), DMA_NONE, 1);
+	if (!desc) {
+		pr_info("step 2 error");
+		return -1;
+	}
+
+	/* [3] Disable the BCH block */
+	command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY;
+	address      = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+
+	pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+		| busw
+		| BF_GPMI_CTRL0_CS(chip)
+		| BF_GPMI_CTRL0_ADDRESS(address)
+		| BF_GPMI_CTRL0_XFER_COUNT(page_size);
+	pio[1] = 0;
+	desc = channel->device->device_prep_slave_sg(channel,
+				(struct scatterlist *)pio, 2, DMA_NONE, 1);
+	if (!desc) {
+		pr_info("step 3 error");
+		return -1;
+	}
+
+	/* [4] submit the DMA */
+	this->dma_type = DMA_FOR_READ_ECC_PAGE;
+	return start_dma_with_bch_irq(this, desc);
+}
+
+/* This structure represents the NFC HAL for this version of the hardware. */
+struct nfc_hal  gpmi_nfc_hal_mx50 = {
+	.description                 = "8-chip GPMI and BCH",
+	.max_chip_count              = 8,
+	.max_data_setup_cycles       = (BM_GPMI_TIMING0_DATA_SETUP >>
+						BP_GPMI_TIMING0_DATA_SETUP),
+	.internal_data_setup_in_ns   = 0,
+	.max_sample_delay_factor     = (BM_GPMI_CTRL1_RDN_DELAY >>
+						BP_GPMI_CTRL1_RDN_DELAY),
+	.max_dll_clock_period_in_ns  = 32,
+	.max_dll_delay_in_ns         = 16,
+	.init                        = init,
+	.extra_init		     = extra_init,
+	.set_geometry                = set_geometry,
+	.set_timing                  = set_timing,
+	.get_timing                  = get_timing,
+	.exit                        = exit,
+	.begin                       = begin,
+	.end                         = end,
+	.clear_bch                   = clear_bch,
+	.is_ready                    = is_ready,
+	.send_command                = send_command,
+	.send_data                   = send_data,
+	.read_data                   = read_data,
+	.send_page                   = send_page,
+	.read_page                   = read_page,
+};
-- 
1.7.0.4


--------------050904080702080100030301--



More information about the linux-arm-kernel mailing list