[RFC PATCH 07/23] at91: Make TWI device common
Ryan Mallon
ryan at bluewatersys.com
Tue Apr 19 21:10:11 EDT 2011
Replace the individual TWI code for each at91 variant with a single
implementation in devices.c
The AT91SAM9G45 has an additional argument to at91_add_device_i2c for
the bus number. We change the other variants to use this API for
consistency.
Signed-off-by: Ryan Mallon <ryan at bluewatersys.com>
---
arch/arm/mach-at91/at572d940hf_devices.c | 111 +++--------------------
arch/arm/mach-at91/at91cap9_devices.c | 76 ++---------------
arch/arm/mach-at91/at91rm9200_devices.c | 77 ++---------------
arch/arm/mach-at91/at91sam9260_devices.c | 78 ++---------------
arch/arm/mach-at91/at91sam9261_devices.c | 77 ++---------------
arch/arm/mach-at91/at91sam9263_devices.c | 77 ++---------------
arch/arm/mach-at91/at91sam9g45_devices.c | 136 +++--------------------------
arch/arm/mach-at91/at91sam9rl_devices.c | 77 ++---------------
arch/arm/mach-at91/board-afeb-9260v1.c | 2 +-
arch/arm/mach-at91/board-at572d940hf_ek.c | 2 +-
arch/arm/mach-at91/board-cap9adk.c | 2 +-
arch/arm/mach-at91/board-carmeva.c | 2 +-
arch/arm/mach-at91/board-cpu9krea.c | 2 +-
arch/arm/mach-at91/board-cpuat91.c | 2 +-
arch/arm/mach-at91/board-csb337.c | 2 +-
arch/arm/mach-at91/board-csb637.c | 2 +-
arch/arm/mach-at91/board-eb9200.c | 2 +-
arch/arm/mach-at91/board-ecbat91.c | 2 +-
arch/arm/mach-at91/board-foxg20.c | 2 +-
arch/arm/mach-at91/board-gsia18s.c | 2 +-
arch/arm/mach-at91/board-kafa.c | 2 +-
arch/arm/mach-at91/board-kb9202.c | 2 +-
arch/arm/mach-at91/board-neocore926.c | 2 +-
arch/arm/mach-at91/board-pcontrol-g20.c | 2 +-
arch/arm/mach-at91/board-picotux200.c | 2 +-
arch/arm/mach-at91/board-qil-a9260.c | 2 +-
arch/arm/mach-at91/board-rm9200dk.c | 2 +-
arch/arm/mach-at91/board-rm9200ek.c | 2 +-
arch/arm/mach-at91/board-sam9-l9260.c | 2 +-
arch/arm/mach-at91/board-sam9260ek.c | 2 +-
arch/arm/mach-at91/board-sam9261ek.c | 2 +-
arch/arm/mach-at91/board-sam9263ek.c | 2 +-
arch/arm/mach-at91/board-sam9g20ek.c | 2 +-
arch/arm/mach-at91/board-sam9rlek.c | 2 +-
arch/arm/mach-at91/board-snapper9260.c | 2 +-
arch/arm/mach-at91/board-stamp9g20.c | 4 +-
arch/arm/mach-at91/board-usb-a9260.c | 2 +-
arch/arm/mach-at91/board-usb-a9263.c | 2 +-
arch/arm/mach-at91/board-yl-9200.c | 2 +-
arch/arm/mach-at91/devices.c | 122 ++++++++++++++++++++++++++
arch/arm/mach-at91/devices.h | 9 ++
arch/arm/mach-at91/include/mach/board.h | 4 -
42 files changed, 233 insertions(+), 675 deletions(-)
diff --git a/arch/arm/mach-at91/at572d940hf_devices.c b/arch/arm/mach-at91/at572d940hf_devices.c
index b06be51..f8ea398 100644
--- a/arch/arm/mach-at91/at572d940hf_devices.c
+++ b/arch/arm/mach-at91/at572d940hf_devices.c
@@ -122,107 +122,22 @@ static struct __initdata at91_dev_table_nand device_nand = {
* TWI (i2c)
* -------------------------------------------------------------------- */
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
- .sda_pin = AT91_PIN_PC7,
- .sda_is_open_drain = 1,
- .scl_pin = AT91_PIN_PC8,
- .scl_is_open_drain = 1,
- .udelay = 2, /* ~100 kHz */
-};
-
-static struct platform_device at572d940hf_twi_device {
- .name = "i2c-gpio",
- .id = -1,
- .dev.platform_data = &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- at91_set_GPIO_periph(AT91_PIN_PC7, 1); /* TWD (SDA) */
- at91_set_multi_drive(AT91_PIN_PC7, 1);
-
- at91_set_GPIO_periph(AT91_PIN_PA8, 1); /* TWCK (SCL) */
- at91_set_multi_drive(AT91_PIN_PC8, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at572d940hf_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi0_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_TWI0,
- .end = AT572D940HF_BASE_TWI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_TWI0,
- .end = AT572D940HF_ID_TWI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at572d940hf_twi0_device = {
- .name = "at91_i2c",
- .id = 0,
- .resource = twi0_resources,
- .num_resources = ARRAY_SIZE(twi0_resources),
+static struct __initdata at91_dev_table_twi device_twi0 = {
+ .mmio_base = AT572D940HF_BASE_TWI0,
+ .irq = AT572D940HF_ID_TWI0,
+ .sda_pin = {AT91_PIN_PC7, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .scl_pin = {AT91_PIN_PC8, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .udelay = 2,
};
-static struct resource twi1_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_TWI1,
- .end = AT572D940HF_BASE_TWI1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_TWI1,
- .end = AT572D940HF_ID_TWI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at572d940hf_twi1_device = {
- .name = "at91_i2c",
- .id = 1,
- .resource = twi1_resources,
- .num_resources = ARRAY_SIZE(twi1_resources),
+static struct __initdata at91_dev_table_twi device_twi1 = {
+ .mmio_base = AT572D940HF_BASE_TWI1,
+ .irq = AT572D940HF_ID_TWI1,
+ .sda_pin = {AT91_PIN_PC7, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .scl_pin = {AT91_PIN_PC8, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .udelay = 2,
};
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- /* pins used for TWI0 interface */
- at91_set_A_periph(AT91_PIN_PC7, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PC7, 1);
-
- at91_set_A_periph(AT91_PIN_PC8, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PC8, 1);
-
- /* pins used for TWI1 interface */
- at91_set_A_periph(AT91_PIN_PC20, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PC20, 1);
-
- at91_set_A_periph(AT91_PIN_PC21, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PC21, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at572d940hf_twi0_device);
- platform_device_register(&at572d940hf_twi1_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
/* --------------------------------------------------------------------
* SPI
* -------------------------------------------------------------------- */
@@ -744,6 +659,8 @@ static struct at91_device_table __initdata at572d940hf_device_table = {
.udc = &device_udc,
.mmc[0] = &device_mmc,
.nand = &device_nand,
+ .twi[0] = &device_twi0,
+ .twi[1] = &device_twi1,
};
void __init at572d940hf_init_devices(void)
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index 435cda1..a775fcc 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -239,77 +239,14 @@ static struct __initdata at91_dev_table_nand device_nand = {
* TWI (i2c)
* -------------------------------------------------------------------- */
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
- .sda_pin = AT91_PIN_PB4,
- .sda_is_open_drain = 1,
- .scl_pin = AT91_PIN_PB5,
- .scl_is_open_drain = 1,
- .udelay = 2, /* ~100 kHz */
-};
-
-static struct platform_device at91cap9_twi_device = {
- .name = "i2c-gpio",
- .id = -1,
- .dev.platform_data = &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */
- at91_set_multi_drive(AT91_PIN_PB4, 1);
-
- at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */
- at91_set_multi_drive(AT91_PIN_PB5, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91cap9_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_TWI,
- .end = AT91CAP9_BASE_TWI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_TWI,
- .end = AT91CAP9_ID_TWI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_twi_device = {
- .name = "at91_i2c",
- .id = -1,
- .resource = twi_resources,
- .num_resources = ARRAY_SIZE(twi_resources),
+static struct __initdata at91_dev_table_twi device_twi = {
+ .mmio_base = AT91CAP9_BASE_TWI,
+ .irq = AT91CAP9_ID_TWI,
+ .sda_pin = {AT91_PIN_PB4, AT91_PIN_PERIPH_B, 0, 0, 0},
+ .scl_pin = {AT91_PIN_PB5, AT91_PIN_PERIPH_B, 0, 0, 0},
+ .udelay = 2,
};
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- /* pins used for TWI interface */
- at91_set_B_periph(AT91_PIN_PB4, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PB4, 1);
-
- at91_set_B_periph(AT91_PIN_PB5, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PB5, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91cap9_twi_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
/* --------------------------------------------------------------------
* SPI
* -------------------------------------------------------------------- */
@@ -1051,6 +988,7 @@ static struct at91_device_table __initdata at91cap9_device_table = {
.mmc[0] = &device_mmc0,
.mmc[1] = &device_mmc1,
.nand = &device_nand,
+ .twi[0] = &device_twi,
};
void __init at91cap9_init_devices(void)
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 0521525..d3ef09d 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -223,78 +223,14 @@ static struct __initdata at91_dev_table_nand device_nand = {
* TWI (i2c)
* -------------------------------------------------------------------- */
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
- .sda_pin = AT91_PIN_PA25,
- .sda_is_open_drain = 1,
- .scl_pin = AT91_PIN_PA26,
- .scl_is_open_drain = 1,
- .udelay = 2, /* ~100 kHz */
-};
-
-static struct platform_device at91rm9200_twi_device = {
- .name = "i2c-gpio",
- .id = -1,
- .dev.platform_data = &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- at91_set_GPIO_periph(AT91_PIN_PA25, 1); /* TWD (SDA) */
- at91_set_multi_drive(AT91_PIN_PA25, 1);
-
- at91_set_GPIO_periph(AT91_PIN_PA26, 1); /* TWCK (SCL) */
- at91_set_multi_drive(AT91_PIN_PA26, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91rm9200_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_TWI,
- .end = AT91RM9200_BASE_TWI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91RM9200_ID_TWI,
- .end = AT91RM9200_ID_TWI,
- .flags = IORESOURCE_IRQ,
- },
+static struct __initdata at91_dev_table_twi device_twi = {
+ .mmio_base = AT91RM9200_BASE_TWI,
+ .irq = AT91RM9200_ID_TWI,
+ .sda_pin = {AT91_PIN_PA25, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .scl_pin = {AT91_PIN_PA26, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .udelay = 2,
};
-static struct platform_device at91rm9200_twi_device = {
- .name = "at91_i2c",
- .id = -1,
- .resource = twi_resources,
- .num_resources = ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- /* pins used for TWI interface */
- at91_set_A_periph(AT91_PIN_PA25, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PA25, 1);
-
- at91_set_A_periph(AT91_PIN_PA26, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PA26, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91rm9200_twi_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
/* --------------------------------------------------------------------
* SPI
* -------------------------------------------------------------------- */
@@ -962,6 +898,7 @@ static struct at91_device_table __initdata at91rm9200_device_table = {
.udc = &device_udc,
.mmc[0] = &device_mmc,
.nand = &device_nand,
+ .twi[0] = &device_twi,
};
void __init at91rm9200_init_devices(void)
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 83aa050..ffcde0e 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -124,79 +124,14 @@ static struct __initdata at91_dev_table_nand device_nand = {
* TWI (i2c)
* -------------------------------------------------------------------- */
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
- .sda_pin = AT91_PIN_PA23,
- .sda_is_open_drain = 1,
- .scl_pin = AT91_PIN_PA24,
- .scl_is_open_drain = 1,
- .udelay = 2, /* ~100 kHz */
+static struct __initdata at91_dev_table_twi device_twi = {
+ .mmio_base = AT91SAM9260_BASE_TWI,
+ .irq = AT91SAM9260_ID_TWI,
+ .sda_pin = {AT91_PIN_PA23, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .scl_pin = {AT91_PIN_PA24, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .udelay = 2,
};
-static struct platform_device at91sam9260_twi_device = {
- .name = "i2c-gpio",
- .id = -1,
- .dev.platform_data = &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- at91_set_GPIO_periph(AT91_PIN_PA23, 1); /* TWD (SDA) */
- at91_set_multi_drive(AT91_PIN_PA23, 1);
-
- at91_set_GPIO_periph(AT91_PIN_PA24, 1); /* TWCK (SCL) */
- at91_set_multi_drive(AT91_PIN_PA24, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91sam9260_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_TWI,
- .end = AT91SAM9260_BASE_TWI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9260_ID_TWI,
- .end = AT91SAM9260_ID_TWI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_twi_device = {
- .name = "at91_i2c",
- .id = -1,
- .resource = twi_resources,
- .num_resources = ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- /* pins used for TWI interface */
- at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PA23, 1);
-
- at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PA24, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91sam9260_twi_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
/* --------------------------------------------------------------------
* SPI
* -------------------------------------------------------------------- */
@@ -1015,6 +950,7 @@ static struct at91_device_table __initdata at91sam9260_device_table = {
.udc = &device_udc,
.mmc[0] = &device_mmc,
.nand = &device_nand,
+ .twi[0] = &device_twi,
};
void __init at91sam9260_init_devices(void)
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index d3384e6..dfcd763 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -87,78 +87,14 @@ static struct __initdata at91_dev_table_nand device_nand = {
* TWI (i2c)
* -------------------------------------------------------------------- */
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
- .sda_pin = AT91_PIN_PA7,
- .sda_is_open_drain = 1,
- .scl_pin = AT91_PIN_PA8,
- .scl_is_open_drain = 1,
- .udelay = 2, /* ~100 kHz */
-};
-
-static struct platform_device at91sam9261_twi_device = {
- .name = "i2c-gpio",
- .id = -1,
- .dev.platform_data = &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- at91_set_GPIO_periph(AT91_PIN_PA7, 1); /* TWD (SDA) */
- at91_set_multi_drive(AT91_PIN_PA7, 1);
-
- at91_set_GPIO_periph(AT91_PIN_PA8, 1); /* TWCK (SCL) */
- at91_set_multi_drive(AT91_PIN_PA8, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91sam9261_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_TWI,
- .end = AT91SAM9261_BASE_TWI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9261_ID_TWI,
- .end = AT91SAM9261_ID_TWI,
- .flags = IORESOURCE_IRQ,
- },
+static struct __initdata at91_dev_table_twi device_twi = {
+ .mmio_base = AT91SAM9261_BASE_TWI,
+ .irq = AT91SAM9261_ID_TWI,
+ .sda_pin = {AT91_PIN_PA7, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .scl_pin = {AT91_PIN_PA8, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .udelay = 2,
};
-static struct platform_device at91sam9261_twi_device = {
- .name = "at91_i2c",
- .id = -1,
- .resource = twi_resources,
- .num_resources = ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- /* pins used for TWI interface */
- at91_set_A_periph(AT91_PIN_PA7, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PA7, 1);
-
- at91_set_A_periph(AT91_PIN_PA8, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PA8, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91sam9261_twi_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
/* --------------------------------------------------------------------
* SPI
* -------------------------------------------------------------------- */
@@ -877,6 +813,7 @@ static struct at91_device_table __initdata at91sam9261_device_table = {
.udc = &device_udc,
.mmc[0] = &device_mmc,
.nand = &device_nand,
+ .twi[0] = &device_twi,
};
void __init at91sam9261_init_devices(void)
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index f2c4987..346aa9e 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -259,78 +259,14 @@ static struct __initdata at91_dev_table_nand device_nand = {
* TWI (i2c)
* -------------------------------------------------------------------- */
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
- .sda_pin = AT91_PIN_PB4,
- .sda_is_open_drain = 1,
- .scl_pin = AT91_PIN_PB5,
- .scl_is_open_drain = 1,
- .udelay = 2, /* ~100 kHz */
-};
-
-static struct platform_device at91sam9263_twi_device = {
- .name = "i2c-gpio",
- .id = -1,
- .dev.platform_data = &pdata,
+static struct __initdata at91_dev_table_twi device_twi = {
+ .mmio_base = AT91SAM9263_BASE_TWI,
+ .irq = AT91SAM9263_ID_TWI,
+ .sda_pin = {AT91_PIN_PB4, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .scl_pin = {AT91_PIN_PB5, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .udelay = 2,
};
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */
- at91_set_multi_drive(AT91_PIN_PB4, 1);
-
- at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */
- at91_set_multi_drive(AT91_PIN_PB5, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91sam9263_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_TWI,
- .end = AT91SAM9263_BASE_TWI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9263_ID_TWI,
- .end = AT91SAM9263_ID_TWI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_twi_device = {
- .name = "at91_i2c",
- .id = -1,
- .resource = twi_resources,
- .num_resources = ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- /* pins used for TWI interface */
- at91_set_A_periph(AT91_PIN_PB4, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PB4, 1);
-
- at91_set_A_periph(AT91_PIN_PB5, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PB5, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91sam9263_twi_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
/* --------------------------------------------------------------------
* SPI
* -------------------------------------------------------------------- */
@@ -1172,6 +1108,7 @@ static struct at91_device_table __initdata at91sam9263_device_table = {
.mmc[0] = &device_mmc0,
.mmc[1] = &device_mmc1,
.nand = &device_nand,
+ .twi[0] = &device_twi,
};
void __init at91sam9263_init_devices(void)
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index e3e4cd8..a86f08e 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -283,132 +283,22 @@ static struct __initdata at91_dev_table_nand device_nand = {
* TWI (i2c)
* -------------------------------------------------------------------- */
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-static struct i2c_gpio_platform_data pdata_i2c0 = {
- .sda_pin = AT91_PIN_PA20,
- .sda_is_open_drain = 1,
- .scl_pin = AT91_PIN_PA21,
- .scl_is_open_drain = 1,
- .udelay = 5, /* ~100 kHz */
-};
-
-static struct platform_device at91sam9g45_twi0_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev.platform_data = &pdata_i2c0,
+static struct __initdata at91_dev_table_twi device_twi0 = {
+ .mmio_base = AT91SAM9G45_BASE_TWI0,
+ .irq = AT91SAM9G45_ID_TWI0,
+ .sda_pin = {AT91_PIN_PA20, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .scl_pin = {AT91_PIN_PA21, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .udelay = 5,
};
-static struct i2c_gpio_platform_data pdata_i2c1 = {
- .sda_pin = AT91_PIN_PB10,
- .sda_is_open_drain = 1,
- .scl_pin = AT91_PIN_PB11,
- .scl_is_open_drain = 1,
- .udelay = 5, /* ~100 kHz */
+static struct __initdata at91_dev_table_twi device_twi1 = {
+ .mmio_base = AT91SAM9G45_BASE_TWI1,
+ .irq = AT91SAM9G45_ID_TWI1,
+ .sda_pin = {AT91_PIN_PB20, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .scl_pin = {AT91_PIN_PB21, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .udelay = 5,
};
-static struct platform_device at91sam9g45_twi1_device = {
- .name = "i2c-gpio",
- .id = 1,
- .dev.platform_data = &pdata_i2c1,
-};
-
-void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
-{
- i2c_register_board_info(i2c_id, devices, nr_devices);
-
- if (i2c_id == 0) {
- at91_set_GPIO_periph(AT91_PIN_PA20, 1); /* TWD (SDA) */
- at91_set_multi_drive(AT91_PIN_PA20, 1);
-
- at91_set_GPIO_periph(AT91_PIN_PA21, 1); /* TWCK (SCL) */
- at91_set_multi_drive(AT91_PIN_PA21, 1);
-
- platform_device_register(&at91sam9g45_twi0_device);
- } else {
- at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* TWD (SDA) */
- at91_set_multi_drive(AT91_PIN_PB10, 1);
-
- at91_set_GPIO_periph(AT91_PIN_PB11, 1); /* TWCK (SCL) */
- at91_set_multi_drive(AT91_PIN_PB11, 1);
-
- platform_device_register(&at91sam9g45_twi1_device);
- }
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-static struct resource twi0_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_TWI0,
- .end = AT91SAM9G45_BASE_TWI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9G45_ID_TWI0,
- .end = AT91SAM9G45_ID_TWI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9g45_twi0_device = {
- .name = "at91_i2c",
- .id = 0,
- .resource = twi0_resources,
- .num_resources = ARRAY_SIZE(twi0_resources),
-};
-
-static struct resource twi1_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_TWI1,
- .end = AT91SAM9G45_BASE_TWI1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9G45_ID_TWI1,
- .end = AT91SAM9G45_ID_TWI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9g45_twi1_device = {
- .name = "at91_i2c",
- .id = 1,
- .resource = twi1_resources,
- .num_resources = ARRAY_SIZE(twi1_resources),
-};
-
-void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
-{
- i2c_register_board_info(i2c_id, devices, nr_devices);
-
- /* pins used for TWI interface */
- if (i2c_id == 0) {
- at91_set_A_periph(AT91_PIN_PA20, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PA20, 1);
-
- at91_set_A_periph(AT91_PIN_PA21, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PA21, 1);
-
- platform_device_register(&at91sam9g45_twi0_device);
- } else {
- at91_set_A_periph(AT91_PIN_PB10, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PB10, 1);
-
- at91_set_A_periph(AT91_PIN_PB11, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PB11, 1);
-
- platform_device_register(&at91sam9g45_twi1_device);
- }
-}
-#else
-void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
/* --------------------------------------------------------------------
* SPI
* -------------------------------------------------------------------- */
@@ -1297,6 +1187,8 @@ static struct at91_device_table __initdata at91sam9g45_device_table = {
.mmc[0] = &device_mmc0,
.mmc[1] = &device_mmc1,
.nand = &device_nand,
+ .twi[0] = &device_twi0,
+ .twi[1] = &device_twi1,
};
void __init at91sam9g45_init_devices(void)
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index e848cc0..dd8f8c4 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -200,78 +200,14 @@ static struct __initdata at91_dev_table_nand device_nand = {
* TWI (i2c)
* -------------------------------------------------------------------- */
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
- .sda_pin = AT91_PIN_PA23,
- .sda_is_open_drain = 1,
- .scl_pin = AT91_PIN_PA24,
- .scl_is_open_drain = 1,
- .udelay = 2, /* ~100 kHz */
-};
-
-static struct platform_device at91sam9rl_twi_device = {
- .name = "i2c-gpio",
- .id = -1,
- .dev.platform_data = &pdata,
+static struct __initdata at91_dev_table_twi device_twi = {
+ .mmio_base = AT91SAM9RL_BASE_TWI0,
+ .irq = AT91SAM9RL_ID_TWI0,
+ .sda_pin = {AT91_PIN_PA23, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .scl_pin = {AT91_PIN_PA24, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .udelay = 2,
};
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- at91_set_GPIO_periph(AT91_PIN_PA23, 1); /* TWD (SDA) */
- at91_set_multi_drive(AT91_PIN_PA23, 1);
-
- at91_set_GPIO_periph(AT91_PIN_PA24, 1); /* TWCK (SCL) */
- at91_set_multi_drive(AT91_PIN_PA24, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91sam9rl_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
- [0] = {
- .start = AT91SAM9RL_BASE_TWI0,
- .end = AT91SAM9RL_BASE_TWI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9RL_ID_TWI0,
- .end = AT91SAM9RL_ID_TWI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9rl_twi_device = {
- .name = "at91_i2c",
- .id = -1,
- .resource = twi_resources,
- .num_resources = ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- /* pins used for TWI interface */
- at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PA23, 1);
-
- at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PA24, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91sam9rl_twi_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
/* --------------------------------------------------------------------
* SPI
* -------------------------------------------------------------------- */
@@ -1098,6 +1034,7 @@ void __init at91_add_device_serial(void) {}
static struct at91_device_table __initdata at91sam9rl_device_table = {
.mmc[0] = &device_mmc,
.nand = &device_nand,
+ .twi[0] = &device_twi,
};
void __init at91sam9rl_init_devices(void)
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 88d08ae..c64b7d6 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -208,7 +208,7 @@ static void __init afeb9260_board_init(void)
/* MMC */
at91_add_device_mmc(0, &afeb9260_mmc_data);
/* I2C */
- at91_add_device_i2c(afeb9260_i2c_devices,
+ at91_add_device_i2c(0, afeb9260_i2c_devices,
ARRAY_SIZE(afeb9260_i2c_devices));
/* Audio */
at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c
index c9ab05d..edbbce4 100644
--- a/arch/arm/mach-at91/board-at572d940hf_ek.c
+++ b/arch/arm/mach-at91/board-at572d940hf_ek.c
@@ -301,7 +301,7 @@ static void __init eb_board_init(void)
/* USB Device */
at91_add_device_udc(&eb_udc_data);
/* I2C */
- at91_add_device_i2c(NULL, 0);
+ at91_add_device_i2c(0, NULL, 0);
/* NOR */
eb_add_device_nor();
/* NAND */
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 0d60378..4fe8c55 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -390,7 +390,7 @@ static void __init cap9adk_board_init(void)
/* NOR Flash */
cap9adk_add_device_nor();
/* I2C */
- at91_add_device_i2c(NULL, 0);
+ at91_add_device_i2c(0, NULL, 0);
/* LCD Controller */
at91_add_device_lcdc(&cap9adk_lcdc_data);
/* AC97 */
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 9d007a8..b9033cb 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -149,7 +149,7 @@ static void __init carmeva_board_init(void)
/* USB Device */
at91_add_device_udc(&carmeva_udc_data);
/* I2C */
- at91_add_device_i2c(NULL, 0);
+ at91_add_device_i2c(0, NULL, 0);
/* SPI */
at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices));
/* Compact Flash */
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 65c6513..9a88ca0 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -361,7 +361,7 @@ static void __init cpu9krea_board_init(void)
/* MMC */
at91_add_device_mmc(0, &cpu9krea_mmc_data);
/* I2C */
- at91_add_device_i2c(cpu9krea_i2c_devices,
+ at91_add_device_i2c(0, cpu9krea_i2c_devices,
ARRAY_SIZE(cpu9krea_i2c_devices));
/* LEDs */
at91_gpio_leds(cpu9krea_leds, ARRAY_SIZE(cpu9krea_leds));
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index ce3525d..fbdd54b 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -168,7 +168,7 @@ static void __init cpuat91_board_init(void)
/* MMC */
at91_add_device_mmc(0, &cpuat91_mmc_data);
/* I2C */
- at91_add_device_i2c(NULL, 0);
+ at91_add_device_i2c(0, NULL, 0);
/* Platform devices */
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index ff7b8c0..f611720 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -239,7 +239,7 @@ static void __init csb337_board_init(void)
/* USB Device */
at91_add_device_udc(&csb337_udc_data);
/* I2C */
- at91_add_device_i2c(csb337_i2c_devices, ARRAY_SIZE(csb337_i2c_devices));
+ at91_add_device_i2c(0, csb337_i2c_devices, ARRAY_SIZE(csb337_i2c_devices));
/* Compact Flash */
at91_set_gpio_input(AT91_PIN_PB22, 1); /* IOIS16 */
at91_add_device_cf(&csb337_cf_data);
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index 74d5b7e..bc26bf7 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -129,7 +129,7 @@ static void __init csb637_board_init(void)
/* USB Device */
at91_add_device_udc(&csb637_udc_data);
/* I2C */
- at91_add_device_i2c(NULL, 0);
+ at91_add_device_i2c(0, NULL, 0);
/* SPI */
at91_add_device_spi(NULL, 0);
/* NOR flash */
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 3705082..eed4d6c 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -109,7 +109,7 @@ static void __init eb9200_board_init(void)
/* USB Device */
at91_add_device_udc(&eb9200_udc_data);
/* I2C */
- at91_add_device_i2c(eb9200_i2c_devices, ARRAY_SIZE(eb9200_i2c_devices));
+ at91_add_device_i2c(0, eb9200_i2c_devices, ARRAY_SIZE(eb9200_i2c_devices));
/* Compact Flash */
at91_add_device_cf(&eb9200_cf_data);
/* SPI */
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index df4a07f..b730b01 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -157,7 +157,7 @@ static void __init ecb_at91board_init(void)
at91_add_device_usbh_ohci(&ecb_at91usbh_data);
/* I2C */
- at91_add_device_i2c(NULL, 0);
+ at91_add_device_i2c(0, NULL, 0);
/* MMC */
at91_add_device_mmc(0, &ecb_at91mmc_data);
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index 6688ec2..79c54fc 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -254,7 +254,7 @@ static void __init foxg20_board_init(void)
/* MMC */
at91_add_device_mmc(0, &foxg20_mmc_data);
/* I2C */
- at91_add_device_i2c(foxg20_i2c_devices, ARRAY_SIZE(foxg20_i2c_devices));
+ at91_add_device_i2c(0, foxg20_i2c_devices, ARRAY_SIZE(foxg20_i2c_devices));
/* LEDs */
at91_gpio_leds(foxg20_leds, ARRAY_SIZE(foxg20_leds));
/* Push Buttons */
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index 8b1d498..e32833d 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -567,7 +567,7 @@ static void __init gsia18s_board_init(void)
gsia18s_leds_init();
gsia18s_pcf_leds_init();
gsia18s_add_device_buttons();
- at91_add_device_i2c(gsia18s_i2c_devices,
+ at91_add_device_i2c(0, gsia18s_i2c_devices,
ARRAY_SIZE(gsia18s_i2c_devices));
at91_add_device_cf(&gsia18s_cf1_data);
at91_add_device_spi(gsia18s_spi_devices,
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index a0cac24..1edff1b 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -87,7 +87,7 @@ static void __init kafa_board_init(void)
/* USB Device */
at91_add_device_udc(&kafa_udc_data);
/* I2C */
- at91_add_device_i2c(NULL, 0);
+ at91_add_device_i2c(0, NULL, 0);
/* SPI */
at91_add_device_spi(NULL, 0);
}
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 59eafa2..682e9f4 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -127,7 +127,7 @@ static void __init kb9202_board_init(void)
/* MMC */
at91_add_device_mmc(0, &kb9202_mmc_data);
/* I2C */
- at91_add_device_i2c(NULL, 0);
+ at91_add_device_i2c(0, NULL, 0);
/* SPI */
at91_add_device_spi(NULL, 0);
/* NAND */
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index bffbbdf..f2c79fb 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -373,7 +373,7 @@ static void __init neocore926_board_init(void)
neocore926_add_device_nand();
/* I2C */
- at91_add_device_i2c(NULL, 0);
+ at91_add_device_i2c(0, NULL, 0);
/* LCD Controller */
at91_add_device_lcdc(&neocore926_lcdc_data);
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index 4c5848d..ad9cc28 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -207,7 +207,7 @@ static void __init pcontrol_g20_board_init(void)
stamp9g20_board_init();
at91_add_device_usbh_ohci(&usbh_data);
at91_add_device_eth(&macb_data);
- at91_add_device_i2c(pcontrol_g20_i2c_devices,
+ at91_add_device_i2c(0, pcontrol_g20_i2c_devices,
ARRAY_SIZE(pcontrol_g20_i2c_devices));
add_device_pcontrol();
at91_add_device_spi(pcontrol_g20_spi_devices,
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 419456d..2b0958b 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -113,7 +113,7 @@ static void __init picotux200_board_init(void)
/* USB Host */
at91_add_device_usbh_ohci(&picotux200_usbh_data);
/* I2C */
- at91_add_device_i2c(NULL, 0);
+ at91_add_device_i2c(0, NULL, 0);
/* MMC */
at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
at91_add_device_mmc(0, &picotux200_mmc_data);
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 255a984..c00b292 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -252,7 +252,7 @@ static void __init ek_board_init(void)
/* NAND */
ek_add_device_nand();
/* I2C */
- at91_add_device_i2c(NULL, 0);
+ at91_add_device_i2c(0, NULL, 0);
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* MMC */
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 3d54963..746b6ea 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -204,7 +204,7 @@ static void __init dk_board_init(void)
/* Compact Flash */
at91_add_device_cf(&dk_cf_data);
/* I2C */
- at91_add_device_i2c(dk_i2c_devices, ARRAY_SIZE(dk_i2c_devices));
+ at91_add_device_i2c(0, dk_i2c_devices, ARRAY_SIZE(dk_i2c_devices));
/* SPI */
at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices));
#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 25fe19f..5e1dca0 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -172,7 +172,7 @@ static void __init ek_board_init(void)
at91_add_device_udc(&ek_udc_data);
at91_set_multi_drive(ek_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
/* I2C */
- at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
+ at91_add_device_i2c(0, ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 589e2f4..bc62008 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -207,7 +207,7 @@ static void __init ek_board_init(void)
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
/* I2C */
- at91_add_device_i2c(NULL, 0);
+ at91_add_device_i2c(0, NULL, 0);
}
MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index b98e766..c8c53ac 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -344,7 +344,7 @@ static void __init ek_board_init(void)
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
/* I2C */
- at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
+ at91_add_device_i2c(0, ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* SSC (to AT73C213) */
at73c213_set_clk(&at73c213_data);
at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index e631172..3e848ba 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -590,7 +590,7 @@ static void __init ek_board_init(void)
/* USB Device */
at91_add_device_udc(&ek_udc_data);
/* I2C */
- at91_add_device_i2c(NULL, 0);
+ at91_add_device_i2c(0, NULL, 0);
/* NAND */
ek_add_device_nand();
/* DM9000 ethernet */
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index fae6ebf..5e1aac1 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -438,7 +438,7 @@ static void __init ek_board_init(void)
/* NAND */
ek_add_device_nand();
/* I2C */
- at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
+ at91_add_device_i2c(0, ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
/* Push Buttons */
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index c25e44c..3dd5013 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -393,7 +393,7 @@ static void __init ek_board_init(void)
/* MMC */
ek_add_device_mmc();
/* I2C */
- at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
+ at91_add_device_i2c(0, ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* LEDs */
ek_add_device_gpio_leds();
/* Push Buttons */
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 3bf3408..475b485 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -308,7 +308,7 @@ static void __init ek_board_init(void)
/* USB HS */
at91_add_device_usba(&ek_usba_udc_data);
/* I2C */
- at91_add_device_i2c(NULL, 0);
+ at91_add_device_i2c(0, NULL, 0);
/* NAND */
ek_add_device_nand();
/* SPI */
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index ca14290..e93a11b 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -166,7 +166,7 @@ static void __init snapper9260_add_device_nand(void)
static void __init snapper9260_board_init(void)
{
- at91_add_device_i2c(snapper9260_i2c_devices,
+ at91_add_device_i2c(0, snapper9260_i2c_devices,
ARRAY_SIZE(snapper9260_i2c_devices));
at91_add_device_serial();
at91_add_device_usbh_ohci(&snapper9260_usbh_data);
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 1e7a73a..9b7f333 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -274,7 +274,7 @@ static void __init portuxg20_board_init(void)
/* Ethernet */
at91_add_device_eth(&macb_data);
/* I2C */
- at91_add_device_i2c(NULL, 0);
+ at91_add_device_i2c(0, NULL, 0);
/* SPI */
at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
/* LEDs */
@@ -291,7 +291,7 @@ static void __init stamp9g20evb_board_init(void)
/* Ethernet */
at91_add_device_eth(&macb_data);
/* I2C */
- at91_add_device_i2c(NULL, 0);
+ at91_add_device_i2c(0, NULL, 0);
/* LEDs */
at91_gpio_leds(stamp9g20evb_leds, ARRAY_SIZE(stamp9g20evb_leds));
}
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
index 9b5cbf5..8c3bbde 100644
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ b/arch/arm/mach-at91/board-usb-a9260.c
@@ -214,7 +214,7 @@ static void __init ek_board_init(void)
/* NAND */
ek_add_device_nand();
/* I2C */
- at91_add_device_i2c(NULL, 0);
+ at91_add_device_i2c(0, NULL, 0);
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* Push Buttons */
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
index 535af00..6e9f2ef 100644
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -232,7 +232,7 @@ static void __init ek_board_init(void)
/* NAND */
ek_add_device_nand();
/* I2C */
- at91_add_device_i2c(NULL, 0);
+ at91_add_device_i2c(0, NULL, 0);
/* Push Buttons */
ek_add_device_buttons();
/* LEDs */
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index bd5ebfd..ef80db1 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -571,7 +571,7 @@ static void __init yl9200_board_init(void)
/* USB Device */
at91_add_device_udc(&yl9200_udc_data);
/* I2C */
- at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices));
+ at91_add_device_i2c(0, yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices));
/* MMC */
at91_add_device_mmc(0, &yl9200_mmc_data);
/* NAND */
diff --git a/arch/arm/mach-at91/devices.c b/arch/arm/mach-at91/devices.c
index ea11801..64e02bd 100644
--- a/arch/arm/mach-at91/devices.c
+++ b/arch/arm/mach-at91/devices.c
@@ -17,6 +17,7 @@
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
+#include <linux/i2c-gpio.h>
#include <mach/cpu.h>
#include <mach/board.h>
@@ -607,6 +608,127 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
void __init at91_add_device_nand(struct atmel_nand_data *data) {}
#endif
+/* --------------------------------------------------------------------
+ * TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data i2c_gpio_pdata = {
+ .sda_is_open_drain = 1,
+ .scl_is_open_drain = 1,
+};
+
+static struct platform_device at91_twi_device = {
+ .name = "i2c-gpio",
+ .id = -1,
+ .dev.platform_data = &i2c_gpio_pdata,
+};
+
+void __init at91_add_device_i2c(short i2c_id,
+ struct i2c_board_info *i2c_devices,
+ int nr_devices)
+{
+ struct at91_dev_table_twi *info;
+
+ BUG_ON(i2c_id < 0 || i2c_id >= ARRAY_SIZE(devices->twi));
+ info = devices->twi[i2c_id];
+ BUG_ON(!info);
+
+ /* TWD (SDA) */
+ i2c_gpio_pdata.sda_pin = info->sda_pin.pin;
+ at91_set_GPIO_periph(info->sda_pin.pin, 1);
+ at91_set_multi_drive(info->sda_pin.pin, 1);
+
+ /* TWCK (SCL) */
+ i2c_gpio_pdata.scl_pin = info->scl_pin.pin;
+ at91_set_GPIO_periph(info->scl_pin.pin, 1);
+ at91_set_multi_drive(info->scl_pin.pin, 1);
+
+ i2c_register_board_info(i2c_id, i2c_devices, nr_devices);
+ platform_device_register(&at91_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi0_resources[] = {
+ [0] = {
+ .end = SZ_16K,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_twi0_device = {
+ .name = "at91_i2c",
+ .id = 0,
+ .resource = twi0_resources,
+ .num_resources = ARRAY_SIZE(twi0_resources),
+};
+
+static struct resource twi1_resources[] = {
+ [0] = {
+ .end = SZ_16K,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_twi1_device = {
+ .name = "at91_i2c",
+ .id = 1,
+ .resource = twi1_resources,
+ .num_resources = ARRAY_SIZE(twi1_resources),
+};
+
+void __init at91_add_device_i2c(short i2c_id,
+ struct i2c_board_info *i2c_devices,
+ int nr_devices)
+{
+ struct at91_dev_table_twi *info;
+
+ BUG_ON(i2c_id < 0 || i2c_id >= ARRAY_SIZE(devices->twi));
+ info = devices->twi[i2c_id]
+ BUG_ON(!info);
+
+ if (i2c_id == 0) {
+ init_resource_mem(&twi0_resources[0], info->mmio_base);
+ init_resource_irq(&twi0_resources[1], info->irq);
+ } else {
+ init_resource_mem(&twi1_resources[0], info->mmio_base);
+ init_resource_irq(&twi1_resources[1], info->irq);
+ }
+
+ /* TWD */
+ config_pins(&info->pin_sda, 1);
+ at91_set_multi_drive(info->pin_sda, 1);
+
+ /* TWCK */
+ config_pins(&info->pin_scl, 1);
+ at91_set_multi_drive(info->pin_scl, 1);
+
+ i2c_register_board_info(i2c_id, i2c_devices, nr_devices);
+ if (i2c_id == 0)
+ platform_device_register(&at91_twi0_device);
+ else
+ platform_device_register(&at91_twi1_device);
+}
+#else
+void __init at91_add_device_i2c(short i2c_id,
+ struct i2c_board_info *i2c_devices,
+ int nr_devices) {}
+#endif
+
void __init at91_init_devices(struct at91_device_table *device_table)
{
devices = device_table;
diff --git a/arch/arm/mach-at91/devices.h b/arch/arm/mach-at91/devices.h
index 3e9ec54..9b99be2 100644
--- a/arch/arm/mach-at91/devices.h
+++ b/arch/arm/mach-at91/devices.h
@@ -73,6 +73,14 @@ struct at91_dev_table_nand {
int nr_pins;
};
+struct at91_dev_table_twi {
+ unsigned mmio_base;
+ int irq;
+ struct at91_pin_config scl_pin;
+ struct at91_pin_config sda_pin;
+ int udelay; /* For i2c-gpio */
+};
+
struct at91_device_table {
struct at91_dev_table_ethernet *ethernet;
struct at91_dev_table_usb_ohci *usbh_ohci;
@@ -80,6 +88,7 @@ struct at91_device_table {
struct at91_dev_table_basic_device *udc;
struct at91_dev_table_mmc *mmc[2];
struct at91_dev_table_nand *nand;
+ struct at91_dev_table_twi *twi[2];
};
extern void __init at91_init_devices(struct at91_device_table *device_table);
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index dd0855d..94232a4 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -116,11 +116,7 @@ struct atmel_nand_data {
extern void __init at91_add_device_nand(struct atmel_nand_data *data);
/* I2C*/
-#if defined(CONFIG_ARCH_AT91SAM9G45)
extern void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices);
-#else
-extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
-#endif
/* SPI */
extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
--
1.7.0.4
More information about the linux-arm-kernel
mailing list