[PATCH v6] [ARM] MX1: Add ARMadeus Systems APF9328 board support
Gwenhael Goavec-Merou
gwenhael.goavec-merou at armadeus.com
Fri Apr 29 01:21:39 EDT 2011
APF9328 is an i.MXL based SOM (System On Module) that can be plugged on
several docking/development boards. Here only basic module support
is added (Ethernet, Serial, NOR Flash).
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou at armadeus.com>
Signed-off-by: Eric Jarrige <eric.jarrige at armadeus.org>
Signed-off-by: Nicolas Colombain <nicolas.colombain at armadeus.com>
Signed-off-by: Julien Boibessot <julien.boibessot at armadeus.com>
---
Changes since v5:
- suppress array index for struct resource
Changes since v4:
- use constant instead of multiplications
- change maintainer description
Changes since v3:
- suppress const and __initconst attributes for platform_data and
resource,
- add SOC_IMX1 in Kconfig
Changes since v2:
- add const and __initconst attributes for platform_data and resource,
- suppress boot_params.
Changes since v1:
- merge pins tables for UART
- suppress init/exit driver callbacks for UART
arch/arm/configs/mx1_defconfig | 1 +
arch/arm/mach-imx/Kconfig | 7 ++
arch/arm/mach-imx/Makefile | 1 +
arch/arm/mach-imx/mach-apf9328.c | 144 ++++++++++++++++++++++++++++++++++++++
4 files changed, 153 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-imx/mach-apf9328.c
diff --git a/arch/arm/configs/mx1_defconfig b/arch/arm/configs/mx1_defconfig
index ff96e8f..e6f6579 100644
--- a/arch/arm/configs/mx1_defconfig
+++ b/arch/arm/configs/mx1_defconfig
@@ -14,6 +14,7 @@ CONFIG_ARCH_MXC=y
CONFIG_ARCH_MX1=y
CONFIG_ARCH_MX1ADS=y
CONFIG_MACH_SCB9328=y
+CONFIG_MACH_APF9328=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
CONFIG_NO_HZ=y
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 0382301..4f556ee 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -86,6 +86,13 @@ config MACH_SCB9328
help
Say Y here if you are using a Synertronixx scb9328 board
+config MACH_APF9328
+ bool "APF9328"
+ select SOC_IMX1
+ select IMX_HAVE_PLATFORM_IMX_UART
+ help
+ Say Yes here if you are using the Armadeus APF9328 development board
+
endif
if MACH_MX21
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 6d51e65..e9eb36d 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
# i.MX1 based machines
obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
+obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o
# i.MX21 based machines
obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
new file mode 100644
index 0000000..15e45c8
--- /dev/null
+++ b/arch/arm/mach-imx/mach-apf9328.c
@@ -0,0 +1,144 @@
+/*
+ * linux/arch/arm/mach-imx/mach-apf9328.c
+ *
+ * Copyright (c) 2005-2011 ARMadeus systems <support at armadeus.com>
+ *
+ * This work is based on mach-scb9328.c which is:
+ * Copyright (c) 2004 Sascha Hauer <saschahauer at web.de>
+ * Copyright (c) 2006-2008 Juergen Beisert <jbeisert at netscape.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/dm9000.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/iomux-mx1.h>
+
+#include "devices-imx1.h"
+
+static const int apf9328_pins[] __initconst = {
+ /* UART1 */
+ PC9_PF_UART1_CTS,
+ PC10_PF_UART1_RTS,
+ PC11_PF_UART1_TXD,
+ PC12_PF_UART1_RXD,
+ /* UART2 */
+ PB28_PF_UART2_CTS,
+ PB29_PF_UART2_RTS,
+ PB30_PF_UART2_TXD,
+ PB31_PF_UART2_RXD,
+};
+
+/*
+ * The APF9328 can have up to 32MB NOR Flash
+ */
+static struct resource flash_resource = {
+ .start = MX1_CS0_PHYS,
+ .end = MX1_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data apf9328_flash_data = {
+ .width = 2,
+};
+
+static struct platform_device apf9328_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &apf9328_flash_data,
+ },
+ .resource = &flash_resource,
+ .num_resources = 1,
+};
+
+/*
+ * APF9328 has a DM9000 Ethernet controller
+ */
+static struct dm9000_plat_data dm9000_setup = {
+ .flags = DM9000_PLATF_16BITONLY
+};
+
+static struct resource dm9000_resources[] = {
+ {
+ .start = MX1_CS4_PHYS + 0x00C00000,
+ .end = MX1_CS4_PHYS + 0x00C00001,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MX1_CS4_PHYS + 0x00C00002,
+ .end = MX1_CS4_PHYS + 0x00C00003,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_GPIOB(14),
+ .end = IRQ_GPIOB(14),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+
+static struct platform_device dm9000x_device = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dm9000_resources),
+ .resource = dm9000_resources,
+ .dev = {
+ .platform_data = &dm9000_setup,
+ }
+};
+
+/* --- SERIAL RESSOURCE --- */
+static const struct imxuart_platform_data uart0_pdata __initconst = {
+ .flags = 0,
+};
+
+static const struct imxuart_platform_data uart1_pdata __initconst = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &apf9328_flash_device,
+ &dm9000x_device,
+};
+
+static void __init apf9328_init(void)
+{
+ mxc_gpio_setup_multiple_pins(apf9328_pins,
+ ARRAY_SIZE(apf9328_pins),
+ "APF9328");
+
+ imx1_add_imx_uart0(&uart0_pdata);
+ imx1_add_imx_uart1(&uart1_pdata);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init apf9328_timer_init(void)
+{
+ mx1_clocks_init(32768);
+}
+
+static struct sys_timer apf9328_timer = {
+ .init = apf9328_timer_init,
+};
+
+MACHINE_START(APF9328, "Armadeus APF9328")
+ /* Maintainer: Gwenhael Goavec-Merou, ARMadeus Systems */
+ .map_io = mx1_map_io,
+ .init_early = imx1_init_early,
+ .init_irq = mx1_init_irq,
+ .timer = &apf9328_timer,
+ .init_machine = apf9328_init,
+MACHINE_END
--
1.7.3.4
More information about the linux-arm-kernel
mailing list