[RFC PATCH 12/23] at91: Make UART devices common
Ryan Mallon
ryan at bluewatersys.com
Tue Apr 19 21:11:34 EDT 2011
Replace the individual UART, including debug UART, code for each at91
vairiant with a single implementation in devices.c
Signed-off-by: Ryan Mallon <ryan at bluewatersys.com>
---
arch/arm/mach-at91/at572d940hf_devices.c | 267 +++--------------
arch/arm/mach-at91/at91cap9_devices.c | 285 ++++---------------
arch/arm/mach-at91/at91rm9200_devices.c | 358 +++++------------------
arch/arm/mach-at91/at91sam9260_devices.c | 449 ++++++-----------------------
arch/arm/mach-at91/at91sam9261_devices.c | 273 ++++--------------
arch/arm/mach-at91/at91sam9263_devices.c | 286 ++++---------------
arch/arm/mach-at91/at91sam9g45_devices.c | 348 +++++------------------
arch/arm/mach-at91/at91sam9rl_devices.c | 360 +++++------------------
arch/arm/mach-at91/board-1arm.c | 4 +-
arch/arm/mach-at91/board-afeb-9260v1.c | 4 +-
arch/arm/mach-at91/board-at572d940hf_ek.c | 6 +-
arch/arm/mach-at91/board-carmeva.c | 2 +-
arch/arm/mach-at91/board-cpu9krea.c | 12 +-
arch/arm/mach-at91/board-cpuat91.c | 8 +-
arch/arm/mach-at91/board-eb9200.c | 4 +-
arch/arm/mach-at91/board-ecbat91.c | 2 +-
arch/arm/mach-at91/board-foxg20.c | 12 +-
arch/arm/mach-at91/board-gsia18s.c | 10 +-
arch/arm/mach-at91/board-kafa.c | 2 +-
arch/arm/mach-at91/board-kb9202.c | 6 +-
arch/arm/mach-at91/board-neocore926.c | 2 +-
arch/arm/mach-at91/board-pcontrol-g20.c | 6 +-
arch/arm/mach-at91/board-picotux200.c | 2 +-
arch/arm/mach-at91/board-qil-a9260.c | 6 +-
arch/arm/mach-at91/board-rm9200dk.c | 2 +-
arch/arm/mach-at91/board-rm9200ek.c | 2 +-
arch/arm/mach-at91/board-sam9-l9260.c | 4 +-
arch/arm/mach-at91/board-sam9260ek.c | 4 +-
arch/arm/mach-at91/board-sam9263ek.c | 2 +-
arch/arm/mach-at91/board-sam9g20ek.c | 4 +-
arch/arm/mach-at91/board-sam9m10g45ek.c | 2 +-
arch/arm/mach-at91/board-sam9rlek.c | 2 +-
arch/arm/mach-at91/board-snapper9260.c | 6 +-
arch/arm/mach-at91/board-stamp9g20.c | 12 +-
arch/arm/mach-at91/board-yl-9200.c | 6 +-
arch/arm/mach-at91/devices.c | 303 +++++++++++++++++++
arch/arm/mach-at91/devices.h | 17 ++
arch/arm/mach-at91/include/mach/board.h | 10 +
38 files changed, 922 insertions(+), 2168 deletions(-)
diff --git a/arch/arm/mach-at91/at572d940hf_devices.c b/arch/arm/mach-at91/at572d940hf_devices.c
index 20fe358..e002ef2 100644
--- a/arch/arm/mach-at91/at572d940hf_devices.c
+++ b/arch/arm/mach-at91/at572d940hf_devices.c
@@ -195,238 +195,61 @@ static struct __initdata at91_dev_table_rtt device_rtt = {
* UART
* -------------------------------------------------------------------- */
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
+static struct __initdata at91_dev_table_uart device_dbgu = {
+ .mmio_base = AT91_VA_BASE_SYS + AT91_DBGU,
+ .irq = AT91_ID_SYS,
+ .clock_asc = "mck",
+ .uart_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0,
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
},
- [1] = {
- .start = AT91_ID_SYS,
- .end = AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data dbgu_data = {
- .use_dma_tx = 0,
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at572d940hf_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
- .dma_mask = &dbgu_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &dbgu_data,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
- at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
-}
-
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_US0,
- .end = AT572D940HF_BASE_US0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_US0,
- .end = AT572D940HF_ID_US0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart0_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
+ .tx_pin = {AT91_PIN_PC31, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PC30, AT91_PIN_PERIPH_A, 0, 0, 0},
};
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at572d940hf_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
- .dma_mask = &uart0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart0_data,
+static struct __initdata at91_dev_table_uart device_uart0 = {
+ .mmio_base = AT572D940HF_BASE_US0,
+ .irq = AT572D940HF_ID_US0,
+ .clock_asc = "usart0_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
},
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
+ .tx_pin = {AT91_PIN_PA8, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PA7, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PA10, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PA9, AT91_PIN_PERIPH_A, 0, 0, 0},
};
-static inline void configure_usart0_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PA8, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PA10, 0); /* RTS0 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PA9, 0); /* CTS0 */
-}
-
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_US1,
- .end = AT572D940HF_BASE_US1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_US1,
- .end = AT572D940HF_ID_US1,
- .flags = IORESOURCE_IRQ,
+static struct __initdata at91_dev_table_uart device_uart1 = {
+ .mmio_base = AT572D940HF_BASE_US1,
+ .irq = AT572D940HF_ID_US1,
+ .clock_asc = "usart1_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
},
+ .tx_pin = {AT91_PIN_PC10, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PC9, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PA12, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PA11, AT91_PIN_PERIPH_A, 0, 0, 0},
};
-static struct atmel_uart_data uart1_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at572d940hf_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
- .dma_mask = &uart1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart1_data,
+static struct __initdata at91_dev_table_uart device_uart2 = {
+ .mmio_base = AT572D940HF_BASE_US2,
+ .irq = AT572D940HF_ID_US2,
+ .clock_asc = "usart2_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
},
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
+ .tx_pin = {AT91_PIN_PC15, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PC14, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PA17, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PA16, AT91_PIN_PERIPH_A, 0, 0, 0},
};
-static inline void configure_usart1_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PC10, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PC9 , 0); /* RXD1 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PC12, 0); /* RTS1 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_US2,
- .end = AT572D940HF_BASE_US2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_US2,
- .end = AT572D940HF_ID_US2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart2_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at572d940hf_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
- .dma_mask = &uart2_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart2_data,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PC15, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PC14, 0); /* RXD2 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PC17, 0); /* RTS2 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PC16, 0); /* CTS2 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-struct platform_device *atmel_default_console_device; /* the serial console device */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
- struct platform_device *pdev;
-
- switch (id) {
- case 0: /* DBGU */
- pdev = &at572d940hf_dbgu_device;
- configure_dbgu_pins();
- at91_clock_associate("mck", &pdev->dev, "usart");
- break;
- case AT572D940HF_ID_US0:
- pdev = &at572d940hf_uart0_device;
- configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &pdev->dev, "usart");
- break;
- case AT572D940HF_ID_US1:
- pdev = &at572d940hf_uart1_device;
- configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &pdev->dev, "usart");
- break;
- case AT572D940HF_ID_US2:
- pdev = &at572d940hf_uart2_device;
- configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &pdev->dev, "usart");
- break;
- default:
- return;
- }
- pdev->id = portnr; /* update to mapped ID */
-
- if (portnr < ATMEL_MAX_UART)
- at91_uarts[portnr] = pdev;
-}
-
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART)
- atmel_default_console_device = at91_uarts[portnr];
-}
-
-void __init at91_add_device_serial(void)
-{
- int i;
-
- for (i = 0; i < ATMEL_MAX_UART; i++) {
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
/* --------------------------------------------------------------------
* mAgic
* -------------------------------------------------------------------- */
@@ -512,6 +335,10 @@ static struct at91_device_table __initdata at572d940hf_device_table = {
.spi[1] = &device_spi1,
.tcb[0] = &device_tcb,
.rtt[0] = &device_rtt,
+ .dbgu = &device_dbgu,
+ .uart[0] = &device_uart0,
+ .uart[1] = &device_uart1,
+ .uart[2] = &device_uart2,
};
void __init at572d940hf_init_devices(void)
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index 3a73ac8..9aa7b40 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -609,236 +609,61 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
* UART
* -------------------------------------------------------------------- */
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91_ID_SYS,
- .end = AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data dbgu_data = {
- .use_dma_tx = 0,
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91cap9_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
- .dma_mask = &dbgu_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &dbgu_data,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
-}
-
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_US0,
- .end = AT91CAP9_BASE_US0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_US0,
- .end = AT91CAP9_ID_US0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart0_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
+static struct __initdata at91_dev_table_uart device_dbgu = {
+ .mmio_base = AT91_VA_BASE_SYS + AT91_DBGU,
+ .irq = AT91_ID_SYS,
+ .clock_asc = "mck",
+ .uart_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0,
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+ },
+ .tx_pin = {AT91_PIN_PC31, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PC30, AT91_PIN_PERIPH_A, 0, 0, 0},
+};
+
+static struct __initdata at91_dev_table_uart device_uart0 = {
+ .mmio_base = AT91CAP9_BASE_US0,
+ .irq = AT91CAP9_ID_US0,
+ .clock_asc = "usart0_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ },
+ .tx_pin = {AT91_PIN_PA22, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PA23, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PA24, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PA25, AT91_PIN_PERIPH_A, 0, 0, 0},
+};
+
+static struct __initdata at91_dev_table_uart device_uart1 = {
+ .mmio_base = AT91CAP9_BASE_US1,
+ .irq = AT91CAP9_ID_US1,
+ .clock_asc = "usart1_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ },
+ .tx_pin = {AT91_PIN_PD0, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PD1, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PD7, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PD8, AT91_PIN_PERIPH_A, 0, 0, 0},
+};
+
+static struct __initdata at91_dev_table_uart device_uart2 = {
+ .mmio_base = AT91CAP9_BASE_US2,
+ .irq = AT91CAP9_ID_US2,
+ .clock_asc = "usart2_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ },
+ .tx_pin = {AT91_PIN_PD2, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PD3, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PD5, AT91_PIN_PERIPH_B, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PD6, AT91_PIN_PERIPH_B, 0, 0, 0},
};
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91cap9_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
- .dma_mask = &uart0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart0_data,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PA24, 0); /* RTS0 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PA25, 0); /* CTS0 */
-}
-
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_US1,
- .end = AT91CAP9_BASE_US1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_US1,
- .end = AT91CAP9_ID_US1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart1_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91cap9_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
- .dma_mask = &uart1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart1_data,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_US2,
- .end = AT91CAP9_BASE_US2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_US2,
- .end = AT91CAP9_ID_US2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart2_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91cap9_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
- .dma_mask = &uart2_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart2_data,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-struct platform_device *atmel_default_console_device; /* the serial console device */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
- struct platform_device *pdev;
-
- switch (id) {
- case 0: /* DBGU */
- pdev = &at91cap9_dbgu_device;
- configure_dbgu_pins();
- at91_clock_associate("mck", &pdev->dev, "usart");
- break;
- case AT91CAP9_ID_US0:
- pdev = &at91cap9_uart0_device;
- configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &pdev->dev, "usart");
- break;
- case AT91CAP9_ID_US1:
- pdev = &at91cap9_uart1_device;
- configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &pdev->dev, "usart");
- break;
- case AT91CAP9_ID_US2:
- pdev = &at91cap9_uart2_device;
- configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &pdev->dev, "usart");
- break;
- default:
- return;
- }
- pdev->id = portnr; /* update to mapped ID */
-
- if (portnr < ATMEL_MAX_UART)
- at91_uarts[portnr] = pdev;
-}
-
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART)
- atmel_default_console_device = at91_uarts[portnr];
-}
-
-void __init at91_add_device_serial(void)
-{
- int i;
-
- for (i = 0; i < ATMEL_MAX_UART; i++) {
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
static struct at91_device_table __initdata at91cap9_device_table = {
.ethernet = &device_eth,
.usbh_ohci = &device_usbh_ohci,
@@ -850,6 +675,10 @@ static struct at91_device_table __initdata at91cap9_device_table = {
.spi[1] = &device_spi1,
.tcb[0] = &device_tcb,
.rtt[0] = &device_rtt,
+ .dbgu = &device_dbgu,
+ .uart[0] = &device_uart0,
+ .uart[1] = &device_uart1,
+ .uart[2] = &device_uart2,
};
void __init at91cap9_init_devices(void)
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 243054a..8f5ffb5 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -472,299 +472,84 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
* UART
* -------------------------------------------------------------------- */
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91_ID_SYS,
- .end = AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data dbgu_data = {
- .use_dma_tx = 0,
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91rm9200_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
- .dma_mask = &dbgu_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &dbgu_data,
+static struct __initdata at91_dev_table_uart device_dbgu = {
+ .mmio_base = AT91_VA_BASE_SYS + AT91_DBGU,
+ .irq = AT91_ID_SYS,
+ .clock_asc = "mck",
+ .uart_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0,
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
},
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
+ .tx_pin = {AT91_PIN_PC31, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PC30, AT91_PIN_PERIPH_A, 0, 0, 0},
};
-static inline void configure_dbgu_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PA30, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PA31, 1); /* DTXD */
-}
-
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_US0,
- .end = AT91RM9200_BASE_US0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91RM9200_ID_US0,
- .end = AT91RM9200_ID_US0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart0_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91rm9200_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
- .dma_mask = &uart0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart0_data,
+static struct __initdata at91_dev_table_uart device_uart0 = {
+ .mmio_base = AT91RM9200_BASE_US0,
+ .irq = AT91RM9200_ID_US0,
+ .clock_asc = "usart0_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
},
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PA17, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PA18, 0); /* RXD0 */
-
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */
-
- if (pins & ATMEL_UART_RTS) {
- /*
- * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
- * We need to drive the pin manually. Default is off (RTS is active low).
- */
- at91_set_gpio_output(AT91_PIN_PA21, 1);
- }
-}
-
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_US1,
- .end = AT91RM9200_BASE_US1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91RM9200_ID_US1,
- .end = AT91RM9200_ID_US1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart1_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91rm9200_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
- .dma_mask = &uart1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart1_data,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PB20, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PB21, 0); /* RXD1 */
-
- if (pins & ATMEL_UART_RI)
- at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */
- if (pins & ATMEL_UART_DTR)
- at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */
- if (pins & ATMEL_UART_DCD)
- at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */
- if (pins & ATMEL_UART_DSR)
- at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */
-}
-
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_US2,
- .end = AT91RM9200_BASE_US2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91RM9200_ID_US2,
- .end = AT91RM9200_ID_US2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart2_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91rm9200_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
- .dma_mask = &uart2_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart2_data,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PA22, 0); /* RXD2 */
- at91_set_A_periph(AT91_PIN_PA23, 1); /* TXD2 */
-
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PA30, 0); /* CTS2 */
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PA31, 0); /* RTS2 */
-}
-
-static struct resource uart3_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_US3,
- .end = AT91RM9200_BASE_US3 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
+ .tx_pin = {AT91_PIN_PA17, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PA18, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PA20, AT91_PIN_PERIPH_A, 0, 0, 0},
+ /*
+ * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
+ * We need to drive the pin manually. Default is off (RTS is active
+ * low).
+ */
+ .cts_pin = {AT91_PIN_PA21, AT91_PIN_PERIPH_A, 1, 0, 0},
+};
+
+static struct __initdata at91_dev_table_uart device_uart1 = {
+ .mmio_base = AT91RM9200_BASE_US1,
+ .irq = AT91RM9200_ID_US1,
+ .clock_asc = "usart1_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
},
- [1] = {
- .start = AT91RM9200_ID_US3,
- .end = AT91RM9200_ID_US3,
- .flags = IORESOURCE_IRQ,
+ .tx_pin = {AT91_PIN_PA20, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PA21, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PB26, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PA24, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .ri_pin = {AT91_PIN_PB18, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .dtr_pin = {AT91_PIN_PB19, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .dcd_pin = {AT91_PIN_PB23, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .dsr_pin = {AT91_PIN_PB25, AT91_PIN_PERIPH_A, 0, 0, 0},
+};
+
+static struct __initdata at91_dev_table_uart device_uart2 = {
+ .mmio_base = AT91RM9200_BASE_US2,
+ .irq = AT91RM9200_ID_US2,
+ .clock_asc = "usart2_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
},
-};
-
-static struct atmel_uart_data uart3_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart3_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91rm9200_uart3_device = {
- .name = "atmel_usart",
- .id = 4,
- .dev = {
- .dma_mask = &uart3_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart3_data,
+ .tx_pin = {AT91_PIN_PA23, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PA22, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PB31, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PA30, AT91_PIN_PERIPH_A, 0, 0, 0},
+};
+
+static struct __initdata at91_dev_table_uart device_uart3 = {
+ .mmio_base = AT91RM9200_BASE_US3,
+ .irq = AT91RM9200_ID_US3,
+ .clock_asc = "usart3_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
},
- .resource = uart3_resources,
- .num_resources = ARRAY_SIZE(uart3_resources),
+ .tx_pin = {AT91_PIN_PA5, AT91_PIN_PERIPH_B, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PA6, AT91_PIN_PERIPH_B, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PB1, AT91_PIN_PERIPH_B, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PB0, AT91_PIN_PERIPH_B, 0, 0, 0},
};
-static inline void configure_usart3_pins(unsigned pins)
-{
- at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */
- at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */
-
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-struct platform_device *atmel_default_console_device; /* the serial console device */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
- struct platform_device *pdev;
-
- switch (id) {
- case 0: /* DBGU */
- pdev = &at91rm9200_dbgu_device;
- configure_dbgu_pins();
- at91_clock_associate("mck", &pdev->dev, "usart");
- break;
- case AT91RM9200_ID_US0:
- pdev = &at91rm9200_uart0_device;
- configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &pdev->dev, "usart");
- break;
- case AT91RM9200_ID_US1:
- pdev = &at91rm9200_uart1_device;
- configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &pdev->dev, "usart");
- break;
- case AT91RM9200_ID_US2:
- pdev = &at91rm9200_uart2_device;
- configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &pdev->dev, "usart");
- break;
- case AT91RM9200_ID_US3:
- pdev = &at91rm9200_uart3_device;
- configure_usart3_pins(pins);
- at91_clock_associate("usart3_clk", &pdev->dev, "usart");
- break;
- default:
- return;
- }
- pdev->id = portnr; /* update to mapped ID */
-
- if (portnr < ATMEL_MAX_UART)
- at91_uarts[portnr] = pdev;
-}
-
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART)
- atmel_default_console_device = at91_uarts[portnr];
-}
-
-void __init at91_add_device_serial(void)
-{
- int i;
-
- for (i = 0; i < ATMEL_MAX_UART; i++) {
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-#else
-void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
static struct at91_device_table __initdata at91rm9200_device_table = {
.ethernet = &device_eth,
.usbh_ohci = &device_usbh_ohci,
@@ -775,6 +560,11 @@ static struct at91_device_table __initdata at91rm9200_device_table = {
.spi[0] = &device_spi,
.tcb[0] = &device_tcb0,
.tcb[1] = &device_tcb1,
+ .dbgu = &device_dbgu,
+ .uart[0] = &device_uart0,
+ .uart[1] = &device_uart1,
+ .uart[2] = &device_uart2,
+ .uart[3] = &device_uart3,
};
void __init at91rm9200_init_devices(void)
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index b2b8416..2a99cd8 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -278,378 +278,104 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
/* --------------------------------------------------------------------
* UART
* -------------------------------------------------------------------- */
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91_ID_SYS,
- .end = AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data dbgu_data = {
- .use_dma_tx = 0,
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
-};
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
- .dma_mask = &dbgu_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &dbgu_data,
+static struct __initdata at91_dev_table_uart device_dbgu = {
+ .mmio_base = AT91_VA_BASE_SYS + AT91_DBGU,
+ .irq = AT91_ID_SYS,
+ .clock_asc = "mck",
+ .uart_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0,
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
},
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
+ .tx_pin = {AT91_PIN_PB15, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PB14, AT91_PIN_PERIPH_A, 0, 0, 0},
};
-static inline void configure_dbgu_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */
-}
-
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US0,
- .end = AT91SAM9260_BASE_US0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
+static struct __initdata at91_dev_table_uart device_uart0 = {
+ .mmio_base = AT91SAM9260_BASE_US0,
+ .irq = AT91SAM9260_ID_US0,
+ .clock_asc = "usart0_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
},
- [1] = {
- .start = AT91SAM9260_ID_US0,
- .end = AT91SAM9260_ID_US0,
- .flags = IORESOURCE_IRQ,
+ .tx_pin = {AT91_PIN_PB4, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PB5, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PB26, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PB27, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .dtr_pin = {AT91_PIN_PB24, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .dsr_pin = {AT91_PIN_PB22, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .dcd_pin = {AT91_PIN_PB23, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .ri_pin = {AT91_PIN_PB25, AT91_PIN_PERIPH_A, 0, 0, 0},
+};
+
+static struct __initdata at91_dev_table_uart device_uart1 = {
+ .mmio_base = AT91SAM9260_BASE_US1,
+ .irq = AT91SAM9260_ID_US1,
+ .clock_asc = "usart1_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
},
-};
-
-static struct atmel_uart_data uart0_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
- .dma_mask = &uart0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart0_data,
+ .tx_pin = {AT91_PIN_PB6, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PB7, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PB28, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PB29, AT91_PIN_PERIPH_A, 0, 0, 0},
+};
+
+static struct __initdata at91_dev_table_uart device_uart2 = {
+ .mmio_base = AT91SAM9260_BASE_US2,
+ .irq = AT91SAM9260_ID_US2,
+ .clock_asc = "usart2_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
},
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */
- if (pins & ATMEL_UART_DTR)
- at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */
- if (pins & ATMEL_UART_DSR)
- at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */
- if (pins & ATMEL_UART_DCD)
- at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */
- if (pins & ATMEL_UART_RI)
- at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */
-}
-
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US1,
- .end = AT91SAM9260_BASE_US1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
+ .tx_pin = {AT91_PIN_PB8, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PB9, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PA4, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PA5, AT91_PIN_PERIPH_A, 0, 0, 0},
+};
+
+static struct __initdata at91_dev_table_uart device_uart3 = {
+ .mmio_base = AT91SAM9260_BASE_US3,
+ .irq = AT91SAM9260_ID_US3,
+ .clock_asc = "usart3_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
},
- [1] = {
- .start = AT91SAM9260_ID_US1,
- .end = AT91SAM9260_ID_US1,
- .flags = IORESOURCE_IRQ,
+ .tx_pin = {AT91_PIN_PB10, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PB11, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PC8, AT91_PIN_PERIPH_B, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PC10, AT91_PIN_PERIPH_B, 0, 0, 0},
+};
+
+static struct __initdata at91_dev_table_uart device_uart4 = {
+ .mmio_base = AT91SAM9260_BASE_US4,
+ .irq = AT91SAM9260_ID_US4,
+ .clock_asc = "usart4_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
},
+ .tx_pin = {AT91_PIN_PA31, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PA30, AT91_PIN_PERIPH_A, 0, 0, 0},
};
-static struct atmel_uart_data uart1_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
- .dma_mask = &uart1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart1_data,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US2,
- .end = AT91SAM9260_BASE_US2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9260_ID_US2,
- .end = AT91SAM9260_ID_US2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart2_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
- .dma_mask = &uart2_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart2_data,
+static struct __initdata at91_dev_table_uart device_uart5 = {
+ .mmio_base = AT91SAM9260_BASE_US5,
+ .irq = AT91SAM9260_ID_US5,
+ .clock_asc = "usart5_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
},
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
+ .tx_pin = {AT91_PIN_PB12, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PB13, AT91_PIN_PERIPH_A, 0, 0, 0},
};
-static inline void configure_usart2_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PA4, 0); /* RTS2 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PA5, 0); /* CTS2 */
-}
-
-static struct resource uart3_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US3,
- .end = AT91SAM9260_BASE_US3 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9260_ID_US3,
- .end = AT91SAM9260_ID_US3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart3_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart3_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_uart3_device = {
- .name = "atmel_usart",
- .id = 4,
- .dev = {
- .dma_mask = &uart3_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart3_data,
- },
- .resource = uart3_resources,
- .num_resources = ARRAY_SIZE(uart3_resources),
-};
-
-static inline void configure_usart3_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */
- at91_set_A_periph(AT91_PIN_PB11, 0); /* RXD3 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PC8, 0); /* RTS3 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PC10, 0); /* CTS3 */
-}
-
-static struct resource uart4_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US4,
- .end = AT91SAM9260_BASE_US4 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9260_ID_US4,
- .end = AT91SAM9260_ID_US4,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart4_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart4_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_uart4_device = {
- .name = "atmel_usart",
- .id = 5,
- .dev = {
- .dma_mask = &uart4_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart4_data,
- },
- .resource = uart4_resources,
- .num_resources = ARRAY_SIZE(uart4_resources),
-};
-
-static inline void configure_usart4_pins(void)
-{
- at91_set_B_periph(AT91_PIN_PA31, 1); /* TXD4 */
- at91_set_B_periph(AT91_PIN_PA30, 0); /* RXD4 */
-}
-
-static struct resource uart5_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US5,
- .end = AT91SAM9260_BASE_US5 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9260_ID_US5,
- .end = AT91SAM9260_ID_US5,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart5_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart5_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_uart5_device = {
- .name = "atmel_usart",
- .id = 6,
- .dev = {
- .dma_mask = &uart5_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart5_data,
- },
- .resource = uart5_resources,
- .num_resources = ARRAY_SIZE(uart5_resources),
-};
-
-static inline void configure_usart5_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PB12, 1); /* TXD5 */
- at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-struct platform_device *atmel_default_console_device; /* the serial console device */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
- struct platform_device *pdev;
-
- switch (id) {
- case 0: /* DBGU */
- pdev = &at91sam9260_dbgu_device;
- configure_dbgu_pins();
- at91_clock_associate("mck", &pdev->dev, "usart");
- break;
- case AT91SAM9260_ID_US0:
- pdev = &at91sam9260_uart0_device;
- configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &pdev->dev, "usart");
- break;
- case AT91SAM9260_ID_US1:
- pdev = &at91sam9260_uart1_device;
- configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &pdev->dev, "usart");
- break;
- case AT91SAM9260_ID_US2:
- pdev = &at91sam9260_uart2_device;
- configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &pdev->dev, "usart");
- break;
- case AT91SAM9260_ID_US3:
- pdev = &at91sam9260_uart3_device;
- configure_usart3_pins(pins);
- at91_clock_associate("usart3_clk", &pdev->dev, "usart");
- break;
- case AT91SAM9260_ID_US4:
- pdev = &at91sam9260_uart4_device;
- configure_usart4_pins();
- at91_clock_associate("usart4_clk", &pdev->dev, "usart");
- break;
- case AT91SAM9260_ID_US5:
- pdev = &at91sam9260_uart5_device;
- configure_usart5_pins();
- at91_clock_associate("usart5_clk", &pdev->dev, "usart");
- break;
- default:
- return;
- }
- pdev->id = portnr; /* update to mapped ID */
-
- if (portnr < ATMEL_MAX_UART)
- at91_uarts[portnr] = pdev;
-}
-
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART)
- atmel_default_console_device = at91_uarts[portnr];
-}
-
-void __init at91_add_device_serial(void)
-{
- int i;
-
- for (i = 0; i < ATMEL_MAX_UART; i++) {
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
/* --------------------------------------------------------------------
* CF/IDE
* -------------------------------------------------------------------- */
@@ -779,6 +505,13 @@ static struct at91_device_table __initdata at91sam9260_device_table = {
.tcb[0] = &device_tcb0,
.tcb[1] = &device_tcb1,
.rtt[0] = &device_rtt,
+ .dbgu = &device_dbgu,
+ .uart[0] = &device_uart0,
+ .uart[1] = &device_uart1,
+ .uart[2] = &device_uart2,
+ .uart[3] = &device_uart3,
+ .uart[4] = &device_uart4,
+ .uart[5] = &device_uart5,
};
void __init at91sam9260_init_devices(void)
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 6f719d5..c355c23 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -425,236 +425,61 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
* UART
* -------------------------------------------------------------------- */
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91_ID_SYS,
- .end = AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data dbgu_data = {
- .use_dma_tx = 0,
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9261_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
- .dma_mask = &dbgu_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &dbgu_data,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PA9, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PA10, 1); /* DTXD */
-}
-
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_US0,
- .end = AT91SAM9261_BASE_US0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9261_ID_US0,
- .end = AT91SAM9261_ID_US0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart0_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9261_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
- .dma_mask = &uart0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart0_data,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */
-}
-
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_US1,
- .end = AT91SAM9261_BASE_US1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9261_ID_US1,
- .end = AT91SAM9261_ID_US1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart1_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9261_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
- .dma_mask = &uart1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart1_data,
+static struct __initdata at91_dev_table_uart device_dbgu = {
+ .mmio_base = AT91_VA_BASE_SYS + AT91_DBGU,
+ .irq = AT91_ID_SYS,
+ .clock_asc = "mck",
+ .uart_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0,
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
},
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
+ .tx_pin = {AT91_PIN_PA10, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PA9, AT91_PIN_PERIPH_A, 0, 0, 0},
};
-static inline void configure_usart1_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PA12, 0); /* RTS1 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PA13, 0); /* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_US2,
- .end = AT91SAM9261_BASE_US2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
+static struct __initdata at91_dev_table_uart device_uart0 = {
+ .mmio_base = AT91SAM9261_BASE_US0,
+ .irq = AT91SAM9261_ID_US0,
+ .clock_asc = "usart0_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
},
- [1] = {
- .start = AT91SAM9261_ID_US2,
- .end = AT91SAM9261_ID_US2,
- .flags = IORESOURCE_IRQ,
+ .tx_pin = {AT91_PIN_PC8, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PC9, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PC10, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PC11, AT91_PIN_PERIPH_A, 0, 0, 0},
+};
+
+static struct __initdata at91_dev_table_uart device_uart1 = {
+ .mmio_base = AT91SAM9261_BASE_US1,
+ .irq = AT91SAM9261_ID_US1,
+ .clock_asc = "usart1_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
},
-};
-
-static struct atmel_uart_data uart2_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9261_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
- .dma_mask = &uart2_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart2_data,
+ .tx_pin = {AT91_PIN_PC12, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PC13, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PA12, AT91_PIN_PERIPH_B, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PA13, AT91_PIN_PERIPH_B, 0, 0, 0},
+};
+
+static struct __initdata at91_dev_table_uart device_uart2 = {
+ .mmio_base = AT91SAM9261_BASE_US2,
+ .irq = AT91SAM9261_ID_US2,
+ .clock_asc = "usart2_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
},
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
+ .tx_pin = {AT91_PIN_PC14, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PC15, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PA15, AT91_PIN_PERIPH_B, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PA16, AT91_PIN_PERIPH_B, 0, 0, 0},
};
-static inline void configure_usart2_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */
- at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PA15, 0); /* RTS2*/
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PA16, 0); /* CTS2 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-struct platform_device *atmel_default_console_device; /* the serial console device */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
- struct platform_device *pdev;
-
- switch (id) {
- case 0: /* DBGU */
- pdev = &at91sam9261_dbgu_device;
- configure_dbgu_pins();
- at91_clock_associate("mck", &pdev->dev, "usart");
- break;
- case AT91SAM9261_ID_US0:
- pdev = &at91sam9261_uart0_device;
- configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &pdev->dev, "usart");
- break;
- case AT91SAM9261_ID_US1:
- pdev = &at91sam9261_uart1_device;
- configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &pdev->dev, "usart");
- break;
- case AT91SAM9261_ID_US2:
- pdev = &at91sam9261_uart2_device;
- configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &pdev->dev, "usart");
- break;
- default:
- return;
- }
- pdev->id = portnr; /* update to mapped ID */
-
- if (portnr < ATMEL_MAX_UART)
- at91_uarts[portnr] = pdev;
-}
-
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART)
- atmel_default_console_device = at91_uarts[portnr];
-}
-
-void __init at91_add_device_serial(void)
-{
- int i;
-
- for (i = 0; i < ATMEL_MAX_UART; i++) {
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
static struct at91_device_table __initdata at91sam9261_device_table = {
.usbh_ohci = &device_usbh_ohci,
.udc = &device_udc,
@@ -665,6 +490,10 @@ static struct at91_device_table __initdata at91sam9261_device_table = {
.spi[1] = &device_spi1,
.tcb[0] = &device_tcb,
.rtt[0] = &device_rtt,
+ .dbgu = &device_dbgu,
+ .uart[0] = &device_uart0,
+ .uart[1] = &device_uart1,
+ .uart[2] = &device_uart2,
};
void __init at91sam9261_init_devices(void)
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 1e8e84a..e5f0164 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -715,237 +715,61 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
* UART
* -------------------------------------------------------------------- */
-#if defined(CONFIG_SERIAL_ATMEL)
-
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91_ID_SYS,
- .end = AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data dbgu_data = {
- .use_dma_tx = 0,
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9263_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
- .dma_mask = &dbgu_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &dbgu_data,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
-}
-
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_US0,
- .end = AT91SAM9263_BASE_US0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9263_ID_US0,
- .end = AT91SAM9263_ID_US0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart0_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9263_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
- .dma_mask = &uart0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart0_data,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */
-}
-
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_US1,
- .end = AT91SAM9263_BASE_US1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9263_ID_US1,
- .end = AT91SAM9263_ID_US1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart1_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
+static struct __initdata at91_dev_table_uart device_dbgu = {
+ .mmio_base = AT91_VA_BASE_SYS + AT91_DBGU,
+ .irq = AT91_ID_SYS,
+ .clock_asc = "mck",
+ .uart_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0,
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+ },
+ .tx_pin = {AT91_PIN_PC31, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PC30, AT91_PIN_PERIPH_A, 0, 0, 0},
+};
+
+static struct __initdata at91_dev_table_uart device_uart0 = {
+ .mmio_base = AT91SAM9263_BASE_US0,
+ .irq = AT91SAM9263_ID_US0,
+ .clock_asc = "usart0_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ },
+ .tx_pin = {AT91_PIN_PA26, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PA27, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PA28, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PA29, AT91_PIN_PERIPH_A, 0, 0, 0},
+};
+
+static struct __initdata at91_dev_table_uart device_uart1 = {
+ .mmio_base = AT91SAM9263_BASE_US1,
+ .irq = AT91SAM9263_ID_US1,
+ .clock_asc = "usart1_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ },
+ .tx_pin = {AT91_PIN_PD0, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PD1, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PD7, AT91_PIN_PERIPH_B, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PD8, AT91_PIN_PERIPH_B, 0, 0, 0},
+};
+
+static struct __initdata at91_dev_table_uart device_uart2 = {
+ .mmio_base = AT91SAM9263_BASE_US2,
+ .irq = AT91SAM9263_ID_US2,
+ .clock_asc = "usart2_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ },
+ .tx_pin = {AT91_PIN_PD2, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PD3, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PD5, AT91_PIN_PERIPH_B, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PD6, AT91_PIN_PERIPH_B, 0, 0, 0},
};
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9263_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
- .dma_mask = &uart1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart1_data,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_US2,
- .end = AT91SAM9263_BASE_US2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9263_ID_US2,
- .end = AT91SAM9263_ID_US2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart2_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9263_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
- .dma_mask = &uart2_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart2_data,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-struct platform_device *atmel_default_console_device; /* the serial console device */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
- struct platform_device *pdev;
-
- switch (id) {
- case 0: /* DBGU */
- pdev = &at91sam9263_dbgu_device;
- configure_dbgu_pins();
- at91_clock_associate("mck", &pdev->dev, "usart");
- break;
- case AT91SAM9263_ID_US0:
- pdev = &at91sam9263_uart0_device;
- configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &pdev->dev, "usart");
- break;
- case AT91SAM9263_ID_US1:
- pdev = &at91sam9263_uart1_device;
- configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &pdev->dev, "usart");
- break;
- case AT91SAM9263_ID_US2:
- pdev = &at91sam9263_uart2_device;
- configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &pdev->dev, "usart");
- break;
- default:
- return;
- }
- pdev->id = portnr; /* update to mapped ID */
-
- if (portnr < ATMEL_MAX_UART)
- at91_uarts[portnr] = pdev;
-}
-
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART)
- atmel_default_console_device = at91_uarts[portnr];
-}
-
-void __init at91_add_device_serial(void)
-{
- int i;
-
- for (i = 0; i < ATMEL_MAX_UART; i++) {
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
static struct at91_device_table __initdata at91sam9263_device_table = {
.ethernet = &device_eth,
.usbh_ohci = &device_usbh_ohci,
@@ -959,6 +783,10 @@ static struct at91_device_table __initdata at91sam9263_device_table = {
.tcb[0] = &device_tcb,
.rtt[0] = &device_rtt0,
.rtt[1] = &device_rtt1,
+ .dbgu = &device_dbgu,
+ .uart[0] = &device_uart0,
+ .uart[1] = &device_uart1,
+ .uart[2] = &device_uart2,
};
void __init at91sam9263_init_devices(void)
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 16006d5..c832917 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -748,284 +748,75 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
* UART
* -------------------------------------------------------------------- */
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91_ID_SYS,
- .end = AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data dbgu_data = {
- .use_dma_tx = 0,
- .use_dma_rx = 0,
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9g45_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
- .dma_mask = &dbgu_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &dbgu_data,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PB12, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PB13, 1); /* DTXD */
-}
-
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_US0,
- .end = AT91SAM9G45_BASE_US0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9G45_ID_US0,
- .end = AT91SAM9G45_ID_US0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart0_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9g45_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
- .dma_mask = &uart0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart0_data,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PB19, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PB18, 0); /* RXD0 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PB17, 0); /* RTS0 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PB15, 0); /* CTS0 */
-}
-
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_US1,
- .end = AT91SAM9G45_BASE_US1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9G45_ID_US1,
- .end = AT91SAM9G45_ID_US1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart1_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9g45_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
- .dma_mask = &uart1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart1_data,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD1 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PD16, 0); /* RTS1 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PD17, 0); /* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_US2,
- .end = AT91SAM9G45_BASE_US2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9G45_ID_US2,
- .end = AT91SAM9G45_ID_US2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart2_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9g45_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
- .dma_mask = &uart2_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart2_data,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
+static struct __initdata at91_dev_table_uart device_dbgu = {
+ .mmio_base = AT91_VA_BASE_SYS + AT91_DBGU,
+ .irq = AT91_ID_SYS,
+ .clock_asc = "mck",
+ .uart_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0,
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+ },
+ .tx_pin = {AT91_PIN_PB13, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PB12, AT91_PIN_PERIPH_A, 0, 0, 0},
+};
+
+static struct __initdata at91_dev_table_uart device_uart0 = {
+ .mmio_base = AT91SAM9G45_BASE_US0,
+ .irq = AT91SAM9G45_ID_US0,
+ .clock_asc = "usart0_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ },
+ .tx_pin = {AT91_PIN_PA19, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PA18, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PB17, AT91_PIN_PERIPH_B, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PB15, AT91_PIN_PERIPH_B, 0, 0, 0},
+};
+
+static struct __initdata at91_dev_table_uart device_uart1 = {
+ .mmio_base = AT91SAM9G45_BASE_US1,
+ .irq = AT91SAM9G45_ID_US1,
+ .clock_asc = "usart1_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ },
+ .tx_pin = {AT91_PIN_PB4, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PB5, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PD16, AT91_PIN_PERIPH_B, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PD17, AT91_PIN_PERIPH_B, 0, 0, 0},
+};
+
+static struct __initdata at91_dev_table_uart device_uart2 = {
+ .mmio_base = AT91SAM9G45_BASE_US2,
+ .irq = AT91SAM9G45_ID_US2,
+ .clock_asc = "usart2_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ },
+ .tx_pin = {AT91_PIN_PB6, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PB7, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PC9, AT91_PIN_PERIPH_B, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PC11, AT91_PIN_PERIPH_B, 0, 0, 0},
+};
+
+static struct __initdata at91_dev_table_uart device_uart3 = {
+ .mmio_base = AT91SAM9G45_BASE_US3,
+ .irq = AT91SAM9G45_ID_US3,
+ .clock_asc = "usart3_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ },
+ .tx_pin = {AT91_PIN_PB8, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PB9, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PA23, AT91_PIN_PERIPH_B, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PA24, AT91_PIN_PERIPH_B, 0, 0, 0},
};
-static inline void configure_usart2_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD2 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PC9, 0); /* RTS2 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PC11, 0); /* CTS2 */
-}
-
-static struct resource uart3_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_US3,
- .end = AT91SAM9G45_BASE_US3 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9G45_ID_US3,
- .end = AT91SAM9G45_ID_US3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart3_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart3_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9g45_uart3_device = {
- .name = "atmel_usart",
- .id = 4,
- .dev = {
- .dma_mask = &uart3_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart3_data,
- },
- .resource = uart3_resources,
- .num_resources = ARRAY_SIZE(uart3_resources),
-};
-
-static inline void configure_usart3_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD3 */
- at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD3 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PA23, 0); /* RTS3 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PA24, 0); /* CTS3 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-struct platform_device *atmel_default_console_device; /* the serial console device */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
- struct platform_device *pdev;
-
- switch (id) {
- case 0: /* DBGU */
- pdev = &at91sam9g45_dbgu_device;
- configure_dbgu_pins();
- at91_clock_associate("mck", &pdev->dev, "usart");
- break;
- case AT91SAM9G45_ID_US0:
- pdev = &at91sam9g45_uart0_device;
- configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &pdev->dev, "usart");
- break;
- case AT91SAM9G45_ID_US1:
- pdev = &at91sam9g45_uart1_device;
- configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &pdev->dev, "usart");
- break;
- case AT91SAM9G45_ID_US2:
- pdev = &at91sam9g45_uart2_device;
- configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &pdev->dev, "usart");
- break;
- case AT91SAM9G45_ID_US3:
- pdev = &at91sam9g45_uart3_device;
- configure_usart3_pins(pins);
- at91_clock_associate("usart3_clk", &pdev->dev, "usart");
- break;
- default:
- return;
- }
- pdev->id = portnr; /* update to mapped ID */
-
- if (portnr < ATMEL_MAX_UART)
- at91_uarts[portnr] = pdev;
-}
-
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART)
- atmel_default_console_device = at91_uarts[portnr];
-}
-
-void __init at91_add_device_serial(void)
-{
- int i;
-
- for (i = 0; i < ATMEL_MAX_UART; i++) {
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
static struct at91_device_table __initdata at91sam9g45_device_table = {
.ethernet = &device_eth,
.usbh_ohci = &device_usb_ohci,
@@ -1040,6 +831,11 @@ static struct at91_device_table __initdata at91sam9g45_device_table = {
.tcb[0] = &device_tcb0,
.tcb[1] = &device_tcb1,
.rtt[0] = &device_rtt,
+ .dbgu = &device_dbgu,
+ .uart[0] = &device_uart0,
+ .uart[1] = &device_uart1,
+ .uart[2] = &device_uart2,
+ .uart[3] = &device_uart3,
};
void __init at91sam9g45_init_devices(void)
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index a6ce60c..e7a1fe1 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -626,292 +626,79 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
* UART
* -------------------------------------------------------------------- */
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91_ID_SYS,
- .end = AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data dbgu_data = {
- .use_dma_tx = 0,
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9rl_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
- .dma_mask = &dbgu_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &dbgu_data,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
+static struct __initdata at91_dev_table_uart device_dbgu = {
+ .mmio_base = AT91_VA_BASE_SYS + AT91_DBGU,
+ .irq = AT91_ID_SYS,
+ .clock_asc = "mck",
+ .uart_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0,
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+ },
+ .tx_pin = {AT91_PIN_PA22, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PA21, AT91_PIN_PERIPH_A, 0, 0, 0},
+};
+
+static struct __initdata at91_dev_table_uart device_uart0 = {
+ .mmio_base = AT91SAM9RL_BASE_US0,
+ .irq = AT91SAM9RL_ID_US0,
+ .clock_asc = "usart0_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ },
+ .tx_pin = {AT91_PIN_PA6, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PA7, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PA9, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PA10, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .dsr_pin = {AT91_PIN_PD14, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .dtr_pin = {AT91_PIN_PD15, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .dcd_pin = {AT91_PIN_PD16, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .ri_pin = {AT91_PIN_PD17, AT91_PIN_PERIPH_A, 0, 0, 0},
+};
+
+static struct __initdata at91_dev_table_uart device_uart1 = {
+ .mmio_base = AT91SAM9RL_BASE_US1,
+ .irq = AT91SAM9RL_ID_US1,
+ .clock_asc = "usart1_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ },
+ .tx_pin = {AT91_PIN_PA11, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PA12, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PA18, AT91_PIN_PERIPH_B, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PA19, AT91_PIN_PERIPH_B, 0, 0, 0},
+};
+
+static struct __initdata at91_dev_table_uart device_uart2 = {
+ .mmio_base = AT91SAM9RL_BASE_US2,
+ .irq = AT91SAM9RL_ID_US2,
+ .clock_asc = "usart2_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ },
+ .tx_pin = {AT91_PIN_PA13, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PA14, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PA29, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PA30, AT91_PIN_PERIPH_A, 0, 0, 0},
+};
+
+static struct __initdata at91_dev_table_uart device_uart3 = {
+ .mmio_base = AT91SAM9RL_BASE_US3,
+ .irq = AT91SAM9RL_ID_US3,
+ .clock_asc = "usart3_clk",
+ .uart_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ },
+ .tx_pin = {AT91_PIN_PB0, AT91_PIN_PERIPH_A, 1, 0, 0},
+ .rx_pin = {AT91_PIN_PB1, AT91_PIN_PERIPH_A, 0, 0, 0},
+ .rts_pin = {AT91_PIN_PD4, AT91_PIN_PERIPH_B, 0, 0, 0},
+ .cts_pin = {AT91_PIN_PD3, AT91_PIN_PERIPH_B, 0, 0, 0},
};
-static inline void configure_dbgu_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PA21, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PA22, 1); /* DTXD */
-}
-
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91SAM9RL_BASE_US0,
- .end = AT91SAM9RL_BASE_US0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9RL_ID_US0,
- .end = AT91SAM9RL_ID_US0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart0_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9rl_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
- .dma_mask = &uart0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart0_data,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */
- if (pins & ATMEL_UART_DSR)
- at91_set_A_periph(AT91_PIN_PD14, 0); /* DSR0 */
- if (pins & ATMEL_UART_DTR)
- at91_set_A_periph(AT91_PIN_PD15, 0); /* DTR0 */
- if (pins & ATMEL_UART_DCD)
- at91_set_A_periph(AT91_PIN_PD16, 0); /* DCD0 */
- if (pins & ATMEL_UART_RI)
- at91_set_A_periph(AT91_PIN_PD17, 0); /* RI0 */
-}
-
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91SAM9RL_BASE_US1,
- .end = AT91SAM9RL_BASE_US1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9RL_ID_US1,
- .end = AT91SAM9RL_ID_US1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart1_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9rl_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
- .dma_mask = &uart1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart1_data,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PA18, 0); /* RTS1 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PA19, 0); /* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91SAM9RL_BASE_US2,
- .end = AT91SAM9RL_BASE_US2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9RL_ID_US2,
- .end = AT91SAM9RL_ID_US2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart2_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9rl_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
- .dma_mask = &uart2_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart2_data,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PA29, 0); /* RTS2 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PA30, 0); /* CTS2 */
-}
-
-static struct resource uart3_resources[] = {
- [0] = {
- .start = AT91SAM9RL_BASE_US3,
- .end = AT91SAM9RL_BASE_US3 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9RL_ID_US3,
- .end = AT91SAM9RL_ID_US3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart3_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart3_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9rl_uart3_device = {
- .name = "atmel_usart",
- .id = 4,
- .dev = {
- .dma_mask = &uart3_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart3_data,
- },
- .resource = uart3_resources,
- .num_resources = ARRAY_SIZE(uart3_resources),
-};
-
-static inline void configure_usart3_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PB0, 1); /* TXD3 */
- at91_set_A_periph(AT91_PIN_PB1, 0); /* RXD3 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PD4, 0); /* RTS3 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PD3, 0); /* CTS3 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-struct platform_device *atmel_default_console_device; /* the serial console device */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
- struct platform_device *pdev;
-
- switch (id) {
- case 0: /* DBGU */
- pdev = &at91sam9rl_dbgu_device;
- configure_dbgu_pins();
- at91_clock_associate("mck", &pdev->dev, "usart");
- break;
- case AT91SAM9RL_ID_US0:
- pdev = &at91sam9rl_uart0_device;
- configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &pdev->dev, "usart");
- break;
- case AT91SAM9RL_ID_US1:
- pdev = &at91sam9rl_uart1_device;
- configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &pdev->dev, "usart");
- break;
- case AT91SAM9RL_ID_US2:
- pdev = &at91sam9rl_uart2_device;
- configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &pdev->dev, "usart");
- break;
- case AT91SAM9RL_ID_US3:
- pdev = &at91sam9rl_uart3_device;
- configure_usart3_pins(pins);
- at91_clock_associate("usart3_clk", &pdev->dev, "usart");
- break;
- default:
- return;
- }
- pdev->id = portnr; /* update to mapped ID */
-
- if (portnr < ATMEL_MAX_UART)
- at91_uarts[portnr] = pdev;
-}
-
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART)
- atmel_default_console_device = at91_uarts[portnr];
-}
-
-void __init at91_add_device_serial(void)
-{
- int i;
-
- for (i = 0; i < ATMEL_MAX_UART; i++) {
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
static struct at91_device_table __initdata at91sam9rl_device_table = {
.mmc[0] = &device_mmc,
.nand = &device_nand,
@@ -919,6 +706,11 @@ static struct at91_device_table __initdata at91sam9rl_device_table = {
.spi[0] = &device_spi,
.tcb[0] = &device_tcb,
.rtt[0] = &device_rtt,
+ .dbgu = &device_dbgu,
+ .uart[0] = &device_uart0,
+ .uart[1] = &device_uart1,
+ .uart[2] = &device_uart2,
+ .uart[3] = &device_uart3,
};
void __init at91sam9rl_init_devices(void)
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 244e8bb..4d9e036 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -48,10 +48,10 @@ static void __init onearm_map_io(void)
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_register_uart(AT91_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
/* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
+ at91_register_uart(AT91_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
| ATMEL_UART_RI);
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index c64b7d6..4c382c3 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -57,13 +57,13 @@ static void __init afeb9260_map_io(void)
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1,
+ at91_register_uart(AT91_ID_US0, 1,
ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR
| ATMEL_UART_DCD | ATMEL_UART_RI);
/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2,
+ at91_register_uart(AT91_ID_US1, 2,
ATMEL_UART_CTS | ATMEL_UART_RTS);
/* set serial console to ttyS0 (ie, DBGU) */
diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c
index edbbce4..d768cdb 100644
--- a/arch/arm/mach-at91/board-at572d940hf_ek.c
+++ b/arch/arm/mach-at91/board-at572d940hf_ek.c
@@ -55,13 +55,13 @@ static void __init eb_map_io(void)
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1. (Rx & Tx only) */
- at91_register_uart(AT572D940HF_ID_US0, 1, 0);
+ at91_register_uart(AT91_ID_US0, 1, 0);
/* USART1 on ttyS2. (Rx & Tx only) */
- at91_register_uart(AT572D940HF_ID_US1, 2, 0);
+ at91_register_uart(AT91_ID_US1, 2, 0);
/* USART2 on ttyS3. (Tx & Rx only */
- at91_register_uart(AT572D940HF_ID_US2, 3, 0);
+ at91_register_uart(AT91_ID_US2, 3, 0);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index b9033cb..336dfd5 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -49,7 +49,7 @@ static void __init carmeva_map_io(void)
at91_register_uart(0, 0, 0);
/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ at91_register_uart(AT91_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
| ATMEL_UART_RI);
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 9a88ca0..dd79122 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -56,26 +56,26 @@ static void __init cpu9krea_map_io(void)
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS |
+ at91_register_uart(AT91_ID_US0, 1, ATMEL_UART_CTS |
ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
ATMEL_UART_DCD | ATMEL_UART_RI);
/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS |
+ at91_register_uart(AT91_ID_US1, 2, ATMEL_UART_CTS |
ATMEL_UART_RTS);
/* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS |
+ at91_register_uart(AT91_ID_US2, 3, ATMEL_UART_CTS |
ATMEL_UART_RTS);
/* USART3 on ttyS4. (Rx, Tx) */
- at91_register_uart(AT91SAM9260_ID_US3, 4, 0);
+ at91_register_uart(AT91_ID_US3, 4, 0);
/* USART4 on ttyS5. (Rx, Tx) */
- at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+ at91_register_uart(AT91_ID_US4, 5, 0);
/* USART5 on ttyS6. (Rx, Tx) */
- at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
+ at91_register_uart(AT91_ID_US5, 6, 0);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index fbdd54b..ddf6b32 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -59,19 +59,19 @@ static void __init cpuat91_map_io(void)
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS |
+ at91_register_uart(AT91_ID_US0, 1, ATMEL_UART_CTS |
ATMEL_UART_RTS);
/* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS |
+ at91_register_uart(AT91_ID_US1, 2, ATMEL_UART_CTS |
ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
ATMEL_UART_DCD | ATMEL_UART_RI);
/* USART2 on ttyS3 (Rx, Tx) */
- at91_register_uart(AT91RM9200_ID_US2, 3, 0);
+ at91_register_uart(AT91_ID_US2, 3, 0);
/* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS |
+ at91_register_uart(AT91_ID_US3, 4, ATMEL_UART_CTS |
ATMEL_UART_RTS);
/* set serial console to ttyS0 (ie, DBGU) */
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index eed4d6c..26e002b 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -49,12 +49,12 @@ static void __init eb9200_map_io(void)
at91_register_uart(0, 0, 0);
/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ at91_register_uart(AT91_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
| ATMEL_UART_RI);
/* USART2 on ttyS2. (Rx, Tx) - IRDA */
- at91_register_uart(AT91RM9200_ID_US2, 2, 0);
+ at91_register_uart(AT91_ID_US2, 2, 0);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index b730b01..d4c1985 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -54,7 +54,7 @@ static void __init ecb_at91map_io(void)
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1. (Rx & Tx only) */
- at91_register_uart(AT91RM9200_ID_US0, 1, 0);
+ at91_register_uart(AT91_ID_US0, 1, 0);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index 79c54fc..f0a021c 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -66,7 +66,7 @@ static void __init foxg20_map_io(void)
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1,
+ at91_register_uart(AT91_ID_US0, 1,
ATMEL_UART_CTS
| ATMEL_UART_RTS
| ATMEL_UART_DTR
@@ -75,23 +75,23 @@ static void __init foxg20_map_io(void)
| ATMEL_UART_RI);
/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2,
+ at91_register_uart(AT91_ID_US1, 2,
ATMEL_UART_CTS
| ATMEL_UART_RTS);
/* USART2 on ttyS3. (Rx & Tx only) */
- at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
+ at91_register_uart(AT91_ID_US2, 3, 0);
/* USART3 on ttyS4. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US3, 4,
+ at91_register_uart(AT91_ID_US3, 4,
ATMEL_UART_CTS
| ATMEL_UART_RTS);
/* USART4 on ttyS5. (Rx & Tx only) */
- at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+ at91_register_uart(AT91_ID_US4, 5, 0);
/* USART5 on ttyS6. (Rx & Tx only) */
- at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
+ at91_register_uart(AT91_ID_US5, 6, 0);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index e32833d..6f04b3a 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -46,7 +46,7 @@ static void __init gsia18s_map_io(void)
* USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI).
* Used for Internal Analog Modem.
*/
- at91_register_uart(AT91SAM9260_ID_US0, 1,
+ at91_register_uart(AT91_ID_US0, 1,
ATMEL_UART_CTS | ATMEL_UART_RTS |
ATMEL_UART_DTR | ATMEL_UART_DSR |
ATMEL_UART_DCD | ATMEL_UART_RI);
@@ -54,25 +54,25 @@ static void __init gsia18s_map_io(void)
* USART1 on ttyS2 (Rx, Tx, CTS, RTS).
* Used for GPS or WiFi or Data stream.
*/
- at91_register_uart(AT91SAM9260_ID_US1, 2,
+ at91_register_uart(AT91_ID_US1, 2,
ATMEL_UART_CTS | ATMEL_UART_RTS);
/*
* USART2 on ttyS3 (Rx, Tx, CTS, RTS).
* Used for External Modem.
*/
- at91_register_uart(AT91SAM9260_ID_US2, 3,
+ at91_register_uart(AT91_ID_US2, 3,
ATMEL_UART_CTS | ATMEL_UART_RTS);
/*
* USART3 on ttyS4 (Rx, Tx, RTS).
* Used for RS-485.
*/
- at91_register_uart(AT91SAM9260_ID_US3, 4, ATMEL_UART_RTS);
+ at91_register_uart(AT91_ID_US3, 4, ATMEL_UART_RTS);
/*
* USART4 on ttyS5 (Rx, Tx).
* Used for TRX433 Radio Module.
*/
- at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+ at91_register_uart(AT91_ID_US4, 5, 0);
}
static void __init init_irq(void)
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 1edff1b..02d2550 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -51,7 +51,7 @@ static void __init kafa_map_io(void)
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_register_uart(AT91_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 682e9f4..2b68edc 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -54,13 +54,13 @@ static void __init kb9202_map_io(void)
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1 (Rx & Tx only) */
- at91_register_uart(AT91RM9200_ID_US0, 1, 0);
+ at91_register_uart(AT91_ID_US0, 1, 0);
/* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
- at91_register_uart(AT91RM9200_ID_US1, 2, 0);
+ at91_register_uart(AT91_ID_US1, 2, 0);
/* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
- at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_register_uart(AT91_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index f2c79fb..e2e4988 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -60,7 +60,7 @@ static void __init neocore926_map_io(void)
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_register_uart(AT91_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index ad9cc28..7896b73 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -42,15 +42,15 @@ static void __init pcontrol_g20_map_io(void)
stamp9g20_map_io();
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
+ at91_register_uart(AT91_ID_US0, 1, ATMEL_UART_CTS
| ATMEL_UART_RTS);
/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) isolated RS485 X5 */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS
+ at91_register_uart(AT91_ID_US1, 2, ATMEL_UART_CTS
| ATMEL_UART_RTS);
/* USART2 on ttyS3. (Rx, Tx) 9bit-Bus Multidrop-mode X4 */
- at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
+ at91_register_uart(AT91_ID_US4, 3, 0);
}
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 2b0958b..60f4456 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -52,7 +52,7 @@ static void __init picotux200_map_io(void)
at91_register_uart(0, 0, 0);
/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ at91_register_uart(AT91_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
| ATMEL_UART_RI);
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index c00b292..8cec22b 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -57,15 +57,15 @@ static void __init ek_map_io(void)
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ at91_register_uart(AT91_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
| ATMEL_UART_RI);
/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_register_uart(AT91_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
/* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_register_uart(AT91_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
/* set serial console to ttyS1 (ie, USART0) */
at91_set_serial_console(1);
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 746b6ea..92917fe 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -57,7 +57,7 @@ static void __init dk_map_io(void)
at91_register_uart(0, 0, 0);
/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ at91_register_uart(AT91_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
| ATMEL_UART_RI);
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 5e1dca0..063c17d 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -57,7 +57,7 @@ static void __init ek_map_io(void)
at91_register_uart(0, 0, 0);
/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ at91_register_uart(AT91_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
| ATMEL_UART_RI);
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index bc62008..a8e359f 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -56,12 +56,12 @@ static void __init ek_map_io(void)
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ at91_register_uart(AT91_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
| ATMEL_UART_RI);
/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_register_uart(AT91_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index c8c53ac..e9926e5 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -58,12 +58,12 @@ static void __init ek_map_io(void)
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ at91_register_uart(AT91_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
| ATMEL_UART_RI);
/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_register_uart(AT91_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 5e1aac1..62d3521 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -61,7 +61,7 @@ static void __init ek_map_io(void)
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_register_uart(AT91_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 3dd5013..d228b5f 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -69,12 +69,12 @@ static void __init ek_map_io(void)
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ at91_register_uart(AT91_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
| ATMEL_UART_RI);
/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_register_uart(AT91_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 6c999db..82ec1ed 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -56,7 +56,7 @@ static void __init ek_map_io(void)
/* USART0 not connected on the -EK board */
/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_register_uart(AT91_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 475b485..9514b9a 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -47,7 +47,7 @@ static void __init ek_map_io(void)
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_register_uart(AT91_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index e93a11b..4521b66 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -48,11 +48,11 @@ static void __init snapper9260_map_io(void)
at91_register_uart(0, 0, 0);
at91_set_serial_console(0);
- at91_register_uart(AT91SAM9260_ID_US0, 1,
+ at91_register_uart(AT91_ID_US0, 1,
ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_register_uart(AT91SAM9260_ID_US1, 2,
+ at91_register_uart(AT91_ID_US1, 2,
ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
+ at91_register_uart(AT91_ID_US2, 3, 0);
}
static void __init snapper9260_init_irq(void)
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 9b7f333..2b332c4 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -49,7 +49,7 @@ static void __init stamp9g20evb_map_io(void)
stamp9g20_map_io();
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ at91_register_uart(AT91_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR
| ATMEL_UART_DCD | ATMEL_UART_RI);
}
@@ -59,21 +59,21 @@ static void __init portuxg20_map_io(void)
stamp9g20_map_io();
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ at91_register_uart(AT91_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR
| ATMEL_UART_DCD | ATMEL_UART_RI);
/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_register_uart(AT91_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
/* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_register_uart(AT91_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
/* USART4 on ttyS5. (Rx, Tx only) */
- at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+ at91_register_uart(AT91_ID_US4, 5, 0);
/* USART5 on ttyS6. (Rx, Tx only) */
- at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
+ at91_register_uart(AT91_ID_US5, 6, 0);
}
static void __init init_irq(void)
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index ef80db1..de79e28 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -61,15 +61,15 @@ static void __init yl9200_map_io(void)
at91_register_uart(0, 0, 0);
/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ at91_register_uart(AT91_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
| ATMEL_UART_RI);
/* USART0 on ttyS2. (Rx & Tx only to JP3) */
- at91_register_uart(AT91RM9200_ID_US0, 2, 0);
+ at91_register_uart(AT91_ID_US0, 2, 0);
/* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
- at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
+ at91_register_uart(AT91_ID_US3, 3, ATMEL_UART_RTS);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
diff --git a/arch/arm/mach-at91/devices.c b/arch/arm/mach-at91/devices.c
index 5d254cb..f94b27d 100644
--- a/arch/arm/mach-at91/devices.c
+++ b/arch/arm/mach-at91/devices.c
@@ -23,6 +23,7 @@
#include <mach/board.h>
#include "devices.h"
+#include "generic.h"
static __initdata struct at91_device_table *devices;
@@ -1000,6 +1001,308 @@ void __init at91_init_devices(struct at91_device_table *device_table)
devices = device_table;
}
+/* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+ [0] = {
+ .end = SZ_512,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data dbgu_data;
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+};
+
+static struct resource uart0_resources[] = {
+ [0] = {
+ .end = SZ_16K,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart0_data;
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+};
+
+static struct resource uart1_resources[] = {
+ [0] = {
+ .end = SZ_16K,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart1_data;
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+};
+
+static struct resource uart2_resources[] = {
+ [0] = {
+ .end = SZ_16K,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart2_data;
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+};
+
+static struct resource uart3_resources[] = {
+ [0] = {
+ .end = SZ_16K,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart3_data;
+static u64 uart3_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91_uart3_device = {
+ .name = "atmel_usart",
+ .id = 4,
+ .dev = {
+ .dma_mask = &uart3_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart3_data,
+ },
+ .resource = uart3_resources,
+ .num_resources = ARRAY_SIZE(uart3_resources),
+};
+
+static struct resource uart4_resources[] = {
+ [0] = {
+ .end = SZ_16K,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart4_data;
+static u64 uart4_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91_uart4_device = {
+ .name = "atmel_usart",
+ .id = 5,
+ .dev = {
+ .dma_mask = &uart4_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart4_data,
+ },
+ .resource = uart4_resources,
+ .num_resources = ARRAY_SIZE(uart4_resources),
+};
+
+static struct resource uart5_resources[] = {
+ [0] = {
+ .end = SZ_16K,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart5_data;
+static u64 uart5_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91_uart5_device = {
+ .name = "atmel_usart",
+ .id = 6,
+ .dev = {
+ .dma_mask = &uart5_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart5_data,
+ },
+ .resource = uart5_resources,
+ .num_resources = ARRAY_SIZE(uart5_resources),
+};
+
+/* the UARTs to use */
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];
+/* the serial console device */
+struct platform_device *atmel_default_console_device;
+
+static void __init configure_uart(struct atmel_uart_data *uart_data,
+ struct resource *uart_res,
+ struct at91_dev_table_uart *uart,
+ unsigned pins)
+{
+ init_resource_mem(&uart_res[0], uart->mmio_base);
+ init_resource_irq(&uart_res[1], uart->irq);
+ memcpy(uart_data, &uart->uart_data, sizeof(struct atmel_uart_data));
+
+ at91_config_pins(&uart->tx_pin, 1);
+ at91_config_pins(&uart->rx_pin, 1);
+
+ if (pins & ATMEL_UART_RTS)
+ at91_config_pins(&uart->rts_pin, 1);
+ if (pins & ATMEL_UART_CTS)
+ at91_config_pins(&uart->cts_pin, 1);
+ if (pins & ATMEL_UART_RI)
+ at91_config_pins(&uart->ri_pin, 1);
+ if (pins & ATMEL_UART_DTR)
+ at91_config_pins(&uart->dtr_pin, 1);
+ if (pins & ATMEL_UART_DCD)
+ at91_config_pins(&uart->dcd_pin, 1);
+ if (pins & ATMEL_UART_DSR)
+ at91_config_pins(&uart->dsr_pin, 1);
+}
+
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+ struct at91_dev_table_uart *uart;
+ struct atmel_uart_data *uart_data;
+ struct resource *uart_res;
+
+ BUG_ON(id < 0 || id > ARRAY_SIZE(devices->uart));
+ if (id == 0)
+ uart = devices->dbgu;
+ else
+ uart = devices->uart[id - 1];
+ BUG_ON(!uart);
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at91_dbgu_device;
+ uart_data = &dbgu_data;
+ uart_res = dbgu_resources;
+ break;
+ case AT91_ID_US0:
+ pdev = &at91_uart0_device;
+ uart_data = &uart0_data;
+ uart_res = uart0_resources;
+ break;
+ case AT91_ID_US1:
+ pdev = &at91_uart1_device;
+ uart_data = &uart1_data;
+ uart_res = uart1_resources;
+ break;
+ case AT91_ID_US2:
+ pdev = &at91_uart2_device;
+ uart_data = &uart2_data;
+ uart_res = uart2_resources;
+ break;
+ case AT91_ID_US3:
+ pdev = &at91_uart3_device;
+ uart_data = &uart3_data;
+ uart_res = uart3_resources;
+ break;
+ case AT91_ID_US4:
+ pdev = &at91_uart4_device;
+ uart_data = &uart4_data;
+ uart_res = uart4_resources;
+ break;
+ case AT91_ID_US5:
+ pdev = &at91_uart5_device;
+ uart_data = &uart5_data;
+ uart_res = uart5_resources;
+ break;
+ default:
+ return;
+ }
+
+ configure_uart(uart_data, uart_res, uart, pins);
+ if (uart->clock_asc)
+ at91_clock_associate(uart->clock_asc, &pdev->dev, "usart");
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+
+ printk(KERN_ERR "%s - uart id %d, portnr = %d, pdev = %p\n",
+ __func__, id, portnr, at91_uarts[portnr]);
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+}
+
+void __init at91_add_device_serial(void)
+{
+ int i;
+
+ for (i = 0; i < ATMEL_MAX_UART; i++) {
+ if (at91_uarts[i])
+ platform_device_register(at91_uarts[i]);
+ }
+
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+#else
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
static int __init at91_add_standard_devices(void)
{
at91_add_device_tc();
diff --git a/arch/arm/mach-at91/devices.h b/arch/arm/mach-at91/devices.h
index d7855ec..c535f58 100644
--- a/arch/arm/mach-at91/devices.h
+++ b/arch/arm/mach-at91/devices.h
@@ -107,6 +107,21 @@ struct at91_dev_table_rtt {
unsigned mmio_base;
};
+struct at91_dev_table_uart {
+ unsigned mmio_base;
+ int irq;
+ struct atmel_uart_data uart_data;
+ const char *clock_asc;
+ struct at91_pin_config tx_pin;
+ struct at91_pin_config rx_pin;
+ struct at91_pin_config rts_pin;
+ struct at91_pin_config cts_pin;
+ struct at91_pin_config ri_pin;
+ struct at91_pin_config dtr_pin;
+ struct at91_pin_config dcd_pin;
+ struct at91_pin_config dsr_pin;
+};
+
struct at91_device_table {
struct at91_dev_table_ethernet *ethernet;
struct at91_dev_table_usb_ohci *usbh_ohci;
@@ -118,6 +133,8 @@ struct at91_device_table {
struct at91_dev_table_spi *spi[2];
struct at91_dev_table_tcb *tcb[2];
struct at91_dev_table_rtt *rtt[2];
+ struct at91_dev_table_uart *dbgu;
+ struct at91_dev_table_uart *uart[6];
};
extern void __init at91_init_devices(struct at91_device_table *device_table);
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 94232a4..851c6c2 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -122,6 +122,16 @@ extern void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devi
extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
/* Serial */
+enum {
+ AT91_ID_DBGU = 0,
+ AT91_ID_US0,
+ AT91_ID_US1,
+ AT91_ID_US2,
+ AT91_ID_US3,
+ AT91_ID_US4,
+ AT91_ID_US5,
+};
+
#define ATMEL_UART_CTS 0x01
#define ATMEL_UART_RTS 0x02
#define ATMEL_UART_DSR 0x04
--
1.7.0.4
More information about the linux-arm-kernel
mailing list