[PATCH 1/2] mach-ux500: voltage domain regulators for DB8500
Linus Walleij
linus.walleij at stericsson.com
Mon Apr 4 04:51:08 EDT 2011
From: Bengt Jonsson <bengt.g.jonsson at stericsson.com>
The DB8500 has ePOD:s (electronic power domains) which are possible
to switch on/off to deactivate silicon blocks on the DB8500 SoC
by cutting their power without retention. We model these as simple
regulators with one bit on/off settings.
Cc: Mark Brown <broonie at opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg at slimlogic.co.uk>
Signed-off-by: Bengt Jonsson <bengt.g.jonsson at stericsson.com>
Signed-off-by: Sundar Iyer <sundar.iyer at stericsson.com>
Signed-off-by: Jonas Aberg <jonas.aberg at stericsson.com>
Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath at stericsson.com>
Signed-off-by: Martin Persson <martin.persson at stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
arch/arm/mach-ux500/Kconfig | 1 +
arch/arm/mach-ux500/Makefile | 3 +-
arch/arm/mach-ux500/cpu-db8500.c | 188 +++++++++++
arch/arm/mach-ux500/regulator-db8500.c | 562 ++++++++++++++++++++++++++++++++
arch/arm/mach-ux500/regulator-db8500.h | 45 +++
5 files changed, 798 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/mach-ux500/regulator-db8500.c
create mode 100644 arch/arm/mach-ux500/regulator-db8500.h
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 76c9275..c6b2375 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -15,6 +15,7 @@ config UX500_SOC_DB5500
config UX500_SOC_DB8500
bool "DB8500"
+ select REGULATOR
endmenu
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index adab0c3..606baed 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -7,7 +7,8 @@ obj-y := clock.o cpu.o devices.o devices-common.o \
obj-y += pm/
obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o prcmu-db5500.o
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o \
- prcmu-db8500.o clock-db8500.o
+ prcmu-db8500.o clock-db8500.o \
+ regulator-db8500.o
obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \
board-mop500-regulators.o \
board-mop500-uib.o board-mop500-stuib.o \
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 3d419fe..80147db 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -17,6 +17,7 @@
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/regulator/machine.h>
#include <asm/mach/map.h>
#include <asm/pmu.h>
@@ -27,6 +28,7 @@
#include "devices-db8500.h"
#include "ste-dma40-db8500.h"
+#include "regulator-db8500.h"
/* minimum static i/o mapping required to boot U8500 platforms */
static struct map_desc u8500_uart_io_desc[] __initdata = {
@@ -131,9 +133,195 @@ static struct platform_device db8500_pmu_device = {
.dev.platform_data = &db8500_pmu_platdata,
};
+/*
+ * Power domain switches (ePODs) modeled as regulators for the DB8500 SoC
+ */
+
+static struct regulator_consumer_supply db8500_vape_consumers[] = {
+ REGULATOR_SUPPLY("v-ape", NULL),
+ REGULATOR_SUPPLY("v-i2c", "nmk-i2c.0"),
+ REGULATOR_SUPPLY("v-i2c", "nmk-i2c.1"),
+ REGULATOR_SUPPLY("v-i2c", "nmk-i2c.2"),
+ REGULATOR_SUPPLY("v-i2c", "nmk-i2c.3"),
+ /* "v-mmc" changed to "vcore" in the mainline kernel */
+ REGULATOR_SUPPLY("vcore", "sdi0"),
+ REGULATOR_SUPPLY("vcore", "sdi1"),
+ REGULATOR_SUPPLY("vcore", "sdi2"),
+ REGULATOR_SUPPLY("vcore", "sdi3"),
+ REGULATOR_SUPPLY("vcore", "sdi4"),
+ REGULATOR_SUPPLY("v-dma", "dma40.0"),
+ REGULATOR_SUPPLY("v-ape", "ab8500-usb.0"),
+ /* "v-uart" changed to "vcore" in the mainline kernel */
+ REGULATOR_SUPPLY("vcore", "uart0"),
+ REGULATOR_SUPPLY("vcore", "uart1"),
+ REGULATOR_SUPPLY("vcore", "uart2"),
+ REGULATOR_SUPPLY("v-ape", "nmk-ske-keypad.0"),
+};
+
+static struct regulator_consumer_supply db8500_vsmps2_consumers[] = {
+ /* CG2900 and CW1200 power to off-chip peripherals */
+ REGULATOR_SUPPLY("gbf_1v8", "cg2900-uart.0"),
+ REGULATOR_SUPPLY("wlan_1v8", "cw1200.0"),
+ REGULATOR_SUPPLY("musb_1v8", "ab8500-usb.0"),
+ /* AV8100 regulator */
+ REGULATOR_SUPPLY("hdmi_1v8", "0-0070"),
+};
+
+static struct regulator_consumer_supply db8500_b2r2_mcde_consumers[] = {
+ REGULATOR_SUPPLY("vsupply", "b2r2.0"),
+ REGULATOR_SUPPLY("vsupply", "mcde.0"),
+};
+
+static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
+ [DB8500_REGULATOR_VAPE] = {
+ .constraints = {
+ .name = "db8500-vape",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .consumer_supplies = db8500_vape_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_vape_consumers),
+ },
+ [DB8500_REGULATOR_VARM] = {
+ .constraints = {
+ .name = "db8500-varm",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [DB8500_REGULATOR_VMODEM] = {
+ .constraints = {
+ .name = "db8500-vmodem",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [DB8500_REGULATOR_VPLL] = {
+ .constraints = {
+ .name = "db8500-vpll",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [DB8500_REGULATOR_VSMPS1] = {
+ .constraints = {
+ .name = "db8500-vsmps1",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [DB8500_REGULATOR_VSMPS2] = {
+ .constraints = {
+ .name = "db8500-vsmps2",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .consumer_supplies = db8500_vsmps2_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_vsmps2_consumers),
+ },
+ [DB8500_REGULATOR_VSMPS3] = {
+ .constraints = {
+ .name = "db8500-vsmps3",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [DB8500_REGULATOR_VRF1] = {
+ .constraints = {
+ .name = "db8500-vrf1",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [DB8500_REGULATOR_SWITCH_SVAMMDSP] = {
+ .supply_regulator = "db8500-vape",
+ .constraints = {
+ .name = "db8500-sva-mmdsp",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [DB8500_REGULATOR_SWITCH_SVAMMDSPRET] = {
+ .constraints = {
+ /* "ret" means "retention" */
+ .name = "db8500-sva-mmdsp-ret",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [DB8500_REGULATOR_SWITCH_SVAPIPE] = {
+ .supply_regulator = "db8500-vape",
+ .constraints = {
+ .name = "db8500-sva-pipe",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [DB8500_REGULATOR_SWITCH_SIAMMDSP] = {
+ .supply_regulator = "db8500-vape",
+ .constraints = {
+ .name = "db8500-sia-mmdsp",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [DB8500_REGULATOR_SWITCH_SIAMMDSPRET] = {
+ .constraints = {
+ .name = "db8500-sia-mmdsp-ret",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [DB8500_REGULATOR_SWITCH_SIAPIPE] = {
+ .supply_regulator = "db8500-vape",
+ .constraints = {
+ .name = "db8500-sia-pipe",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [DB8500_REGULATOR_SWITCH_SGA] = {
+ .supply_regulator = "db8500-vape",
+ .constraints = {
+ .name = "db8500-sga",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [DB8500_REGULATOR_SWITCH_B2R2_MCDE] = {
+ .supply_regulator = "db8500-vape",
+ .constraints = {
+ .name = "db8500-b2r2-mcde",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .consumer_supplies = db8500_b2r2_mcde_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_b2r2_mcde_consumers),
+ },
+ [DB8500_REGULATOR_SWITCH_ESRAM12] = {
+ .supply_regulator = "db8500-vape",
+ .constraints = {
+ .name = "db8500-esram12",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [DB8500_REGULATOR_SWITCH_ESRAM12RET] = {
+ .constraints = {
+ .name = "db8500-esram12-ret",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [DB8500_REGULATOR_SWITCH_ESRAM34] = {
+ .supply_regulator = "db8500-vape",
+ .constraints = {
+ .name = "db8500-esram34",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [DB8500_REGULATOR_SWITCH_ESRAM34RET] = {
+ .constraints = {
+ .name = "db8500-esram34-ret",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+};
+
+static struct platform_device db8500_regulator_device = {
+ .name = "db8500-regulators",
+ .id = 0,
+ .dev = {
+ .platform_data = &db8500_regulators,
+ },
+};
+
static struct platform_device *platform_devs[] __initdata = {
&u8500_dma40_device,
&db8500_pmu_device,
+ &db8500_regulator_device,
};
static resource_size_t __initdata db8500_gpio_base[] = {
diff --git a/arch/arm/mach-ux500/regulator-db8500.c b/arch/arm/mach-ux500/regulator-db8500.c
new file mode 100644
index 0000000..edeef2d
--- /dev/null
+++ b/arch/arm/mach-ux500/regulator-db8500.c
@@ -0,0 +1,562 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Authors: Sundar Iyer <sundar.iyer at stericsson.com> for ST-Ericsson
+ * Bengt Jonsson <bengt.g.jonsson at stericsson.com> for ST-Ericsson
+ *
+ * Power domain regulators on DB8500
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+#include "regulator-db8500.h"
+
+#include <mach/prcmu-fw-api.h>
+
+/*
+ * power state reference count
+ */
+static int power_state_active_cnt; /* will initialize to zero */
+static DEFINE_SPINLOCK(power_state_active_lock);
+
+static void power_state_active_enable(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&power_state_active_lock, flags);
+ power_state_active_cnt++;
+ spin_unlock_irqrestore(&power_state_active_lock, flags);
+}
+
+static int power_state_active_disable(void)
+{
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&power_state_active_lock, flags);
+ if (power_state_active_cnt <= 0) {
+ pr_err("power state: unbalanced enable/disable calls\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ power_state_active_cnt--;
+out:
+ spin_unlock_irqrestore(&power_state_active_lock, flags);
+ return ret;
+}
+
+/*
+ * Exported interface for CPUIdle only. This function is called when interrupts
+ * are turned off. Hence, no locking.
+ */
+int power_state_active_is_enabled(void)
+{
+ return (power_state_active_cnt > 0);
+}
+
+/**
+ * struct db8500_regulator_info - db8500 regulator information
+ * @dev: device pointer
+ * @desc: regulator description
+ * @rdev: regulator device pointer
+ * @is_enabled: status of the regulator
+ * @epod_id: id for EPOD (power domain)
+ * @is_ramret: RAM retention switch for EPOD (power domain)
+ * @operating_point: operating point (only for vape, to be removed)
+ *
+ */
+struct db8500_regulator_info {
+ struct device *dev;
+ struct regulator_desc desc;
+ struct regulator_dev *rdev;
+ bool is_enabled;
+ u16 epod_id;
+ bool is_ramret;
+ bool exclude_from_power_state;
+ unsigned int operating_point;
+};
+
+static int db8500_regulator_enable(struct regulator_dev *rdev)
+{
+ struct db8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+ if (info == NULL)
+ return -EINVAL;
+
+ dev_vdbg(rdev_get_dev(rdev), "regulator-%s-enable\n",
+ info->desc.name);
+
+ info->is_enabled = true;
+ if (!info->exclude_from_power_state)
+ power_state_active_enable();
+
+ return 0;
+}
+
+static int db8500_regulator_disable(struct regulator_dev *rdev)
+{
+ struct db8500_regulator_info *info = rdev_get_drvdata(rdev);
+ int ret = 0;
+
+ if (info == NULL)
+ return -EINVAL;
+
+ dev_vdbg(rdev_get_dev(rdev), "regulator-%s-disable\n",
+ info->desc.name);
+
+ info->is_enabled = false;
+ if (!info->exclude_from_power_state)
+ ret = power_state_active_disable();
+
+ return ret;
+}
+
+static int db8500_regulator_is_enabled(struct regulator_dev *rdev)
+{
+ struct db8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+ if (info == NULL)
+ return -EINVAL;
+
+ dev_vdbg(rdev_get_dev(rdev), "regulator-%s-is_enabled (is_enabled):"
+ " %i\n", info->desc.name, info->is_enabled);
+
+ return info->is_enabled;
+}
+
+/* db8500 regulator operations */
+static struct regulator_ops db8500_regulator_ops = {
+ .enable = db8500_regulator_enable,
+ .disable = db8500_regulator_disable,
+ .is_enabled = db8500_regulator_is_enabled,
+};
+
+/*
+ * EPOD control
+ */
+static bool epod_on[NUM_EPOD_ID];
+static bool epod_ramret[NUM_EPOD_ID];
+
+static int enable_epod(u16 epod_id, bool ramret)
+{
+ int ret;
+
+ if (ramret) {
+ if (!epod_on[epod_id]) {
+ ret = prcmu_set_epod(epod_id, EPOD_STATE_RAMRET);
+ if (ret < 0)
+ return ret;
+ }
+ epod_ramret[epod_id] = true;
+ } else {
+ ret = prcmu_set_epod(epod_id, EPOD_STATE_ON);
+ if (ret < 0)
+ return ret;
+ epod_on[epod_id] = true;
+ }
+
+ return 0;
+}
+
+static int disable_epod(u16 epod_id, bool ramret)
+{
+ int ret;
+
+ if (ramret) {
+ if (!epod_on[epod_id]) {
+ ret = prcmu_set_epod(epod_id, EPOD_STATE_OFF);
+ if (ret < 0)
+ return ret;
+ }
+ epod_ramret[epod_id] = false;
+ } else {
+ if (epod_ramret[epod_id]) {
+ ret = prcmu_set_epod(epod_id, EPOD_STATE_RAMRET);
+ if (ret < 0)
+ return ret;
+ } else {
+ ret = prcmu_set_epod(epod_id, EPOD_STATE_OFF);
+ if (ret < 0)
+ return ret;
+ }
+ epod_on[epod_id] = false;
+ }
+
+ return 0;
+}
+
+/*
+ * Regulator switch
+ */
+static int db8500_regulator_switch_enable(struct regulator_dev *rdev)
+{
+ struct db8500_regulator_info *info = rdev_get_drvdata(rdev);
+ int ret;
+
+ if (info == NULL)
+ return -EINVAL;
+
+ dev_vdbg(rdev_get_dev(rdev), "regulator-switch-%s-enable\n",
+ info->desc.name);
+
+ ret = enable_epod(info->epod_id, info->is_ramret);
+ if (ret < 0) {
+ dev_err(rdev_get_dev(rdev),
+ "regulator-switch-%s-enable: prcmu call failed\n",
+ info->desc.name);
+ goto out;
+ }
+
+ info->is_enabled = true;
+out:
+ return ret;
+}
+
+static int db8500_regulator_switch_disable(struct regulator_dev *rdev)
+{
+ struct db8500_regulator_info *info = rdev_get_drvdata(rdev);
+ int ret;
+
+ if (info == NULL)
+ return -EINVAL;
+
+ dev_vdbg(rdev_get_dev(rdev), "regulator-switch-%s-disable\n",
+ info->desc.name);
+
+ ret = disable_epod(info->epod_id, info->is_ramret);
+ if (ret < 0) {
+ dev_err(rdev_get_dev(rdev),
+ "regulator_switch-%s-disable: prcmu call failed\n",
+ info->desc.name);
+ goto out;
+ }
+
+ info->is_enabled = 0;
+out:
+ return ret;
+}
+
+static int db8500_regulator_switch_is_enabled(struct regulator_dev *rdev)
+{
+ struct db8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+ if (info == NULL)
+ return -EINVAL;
+
+ dev_vdbg(rdev_get_dev(rdev),
+ "regulator-switch-%s-is_enabled (is_enabled): %i\n",
+ info->desc.name, info->is_enabled);
+
+ return info->is_enabled;
+}
+
+static struct regulator_ops db8500_regulator_switch_ops = {
+ .enable = db8500_regulator_switch_enable,
+ .disable = db8500_regulator_switch_disable,
+ .is_enabled = db8500_regulator_switch_is_enabled,
+};
+
+/*
+ * Regulator information
+ */
+static struct db8500_regulator_info
+ db8500_regulator_info[DB8500_NUM_REGULATORS] = {
+ [DB8500_REGULATOR_VAPE] = {
+ .desc = {
+ .name = "db8500-vape",
+ .id = DB8500_REGULATOR_VAPE,
+ .ops = &db8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ },
+ [DB8500_REGULATOR_VARM] = {
+ .desc = {
+ .name = "db8500-varm",
+ .id = DB8500_REGULATOR_VARM,
+ .ops = &db8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ },
+ [DB8500_REGULATOR_VMODEM] = {
+ .desc = {
+ .name = "db8500-vmodem",
+ .id = DB8500_REGULATOR_VMODEM,
+ .ops = &db8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ },
+ [DB8500_REGULATOR_VPLL] = {
+ .desc = {
+ .name = "db8500-vpll",
+ .id = DB8500_REGULATOR_VPLL,
+ .ops = &db8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ },
+ [DB8500_REGULATOR_VSMPS1] = {
+ .desc = {
+ .name = "db8500-vsmps1",
+ .id = DB8500_REGULATOR_VSMPS1,
+ .ops = &db8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ },
+ [DB8500_REGULATOR_VSMPS2] = {
+ .desc = {
+ .name = "db8500-vsmps2",
+ .id = DB8500_REGULATOR_VSMPS2,
+ .ops = &db8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ .exclude_from_power_state = true,
+ },
+ [DB8500_REGULATOR_VSMPS3] = {
+ .desc = {
+ .name = "db8500-vsmps3",
+ .id = DB8500_REGULATOR_VSMPS3,
+ .ops = &db8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ },
+ [DB8500_REGULATOR_VRF1] = {
+ .desc = {
+ .name = "db8500-vrf1",
+ .id = DB8500_REGULATOR_VRF1,
+ .ops = &db8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ },
+ [DB8500_REGULATOR_SWITCH_SVAMMDSP] = {
+ .desc = {
+ .name = "db8500-sva-mmdsp",
+ .id = DB8500_REGULATOR_SWITCH_SVAMMDSP,
+ .ops = &db8500_regulator_switch_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ .epod_id = EPOD_ID_SVAMMDSP,
+ },
+ [DB8500_REGULATOR_SWITCH_SVAMMDSPRET] = {
+ .desc = {
+ .name = "db8500-sva-mmdsp-ret",
+ .id = DB8500_REGULATOR_SWITCH_SVAMMDSPRET,
+ .ops = &db8500_regulator_switch_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ .epod_id = EPOD_ID_SVAMMDSP,
+ .is_ramret = true,
+ },
+ [DB8500_REGULATOR_SWITCH_SVAPIPE] = {
+ .desc = {
+ .name = "db8500-sva-pipe",
+ .id = DB8500_REGULATOR_SWITCH_SVAPIPE,
+ .ops = &db8500_regulator_switch_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ .epod_id = EPOD_ID_SVAPIPE,
+ },
+ [DB8500_REGULATOR_SWITCH_SIAMMDSP] = {
+ .desc = {
+ .name = "db8500-sia-mmdsp",
+ .id = DB8500_REGULATOR_SWITCH_SIAMMDSP,
+ .ops = &db8500_regulator_switch_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ .epod_id = EPOD_ID_SIAMMDSP,
+ },
+ [DB8500_REGULATOR_SWITCH_SIAMMDSPRET] = {
+ .desc = {
+ .name = "db8500-sia-mmdsp-ret",
+ .id = DB8500_REGULATOR_SWITCH_SIAMMDSPRET,
+ .ops = &db8500_regulator_switch_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ .epod_id = EPOD_ID_SIAMMDSP,
+ .is_ramret = true,
+ },
+ [DB8500_REGULATOR_SWITCH_SIAPIPE] = {
+ .desc = {
+ .name = "db8500-sia-pipe",
+ .id = DB8500_REGULATOR_SWITCH_SIAPIPE,
+ .ops = &db8500_regulator_switch_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ .epod_id = EPOD_ID_SIAPIPE,
+ },
+ [DB8500_REGULATOR_SWITCH_SGA] = {
+ .desc = {
+ .name = "db8500-sga",
+ .id = DB8500_REGULATOR_SWITCH_SGA,
+ .ops = &db8500_regulator_switch_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ .epod_id = EPOD_ID_SGA,
+ },
+ [DB8500_REGULATOR_SWITCH_B2R2_MCDE] = {
+ .desc = {
+ .name = "db8500-b2r2-mcde",
+ .id = DB8500_REGULATOR_SWITCH_B2R2_MCDE,
+ .ops = &db8500_regulator_switch_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ .epod_id = EPOD_ID_B2R2_MCDE,
+ },
+ [DB8500_REGULATOR_SWITCH_ESRAM12] = {
+ .desc = {
+ .name = "db8500-esram12",
+ .id = DB8500_REGULATOR_SWITCH_ESRAM12,
+ .ops = &db8500_regulator_switch_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ .epod_id = EPOD_ID_ESRAM12,
+ .is_enabled = true,
+ },
+ [DB8500_REGULATOR_SWITCH_ESRAM12RET] = {
+ .desc = {
+ .name = "db8500-esram12-ret",
+ .id = DB8500_REGULATOR_SWITCH_ESRAM12RET,
+ .ops = &db8500_regulator_switch_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ .epod_id = EPOD_ID_ESRAM12,
+ .is_ramret = true,
+ },
+ [DB8500_REGULATOR_SWITCH_ESRAM34] = {
+ .desc = {
+ .name = "db8500-esram34",
+ .id = DB8500_REGULATOR_SWITCH_ESRAM34,
+ .ops = &db8500_regulator_switch_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ .epod_id = EPOD_ID_ESRAM34,
+ .is_enabled = true,
+ },
+ [DB8500_REGULATOR_SWITCH_ESRAM34RET] = {
+ .desc = {
+ .name = "db8500-esram34-ret",
+ .id = DB8500_REGULATOR_SWITCH_ESRAM34RET,
+ .ops = &db8500_regulator_switch_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ .epod_id = EPOD_ID_ESRAM34,
+ .is_ramret = true,
+ },
+};
+
+static int __init db8500_regulator_probe(struct platform_device *pdev)
+{
+ struct regulator_init_data *db8500_init_data =
+ dev_get_platdata(&pdev->dev);
+ int i, err;
+
+ /* register all regulators */
+ for (i = 0; i < ARRAY_SIZE(db8500_regulator_info); i++) {
+ struct db8500_regulator_info *info;
+ struct regulator_init_data *init_data = &db8500_init_data[i];
+
+ /* assign per-regulator data */
+ info = &db8500_regulator_info[i];
+ info->dev = &pdev->dev;
+
+ /* register with the regulator framework */
+ info->rdev = regulator_register(&info->desc, &pdev->dev,
+ init_data, info);
+ if (IS_ERR(info->rdev)) {
+ err = PTR_ERR(info->rdev);
+ dev_err(&pdev->dev, "failed to register %s: err %i\n",
+ info->desc.name, err);
+
+ /* if failing, unregister all earlier regulators */
+ i--;
+ while (i >= 0) {
+ info = &db8500_regulator_info[i];
+ regulator_unregister(info->rdev);
+ i--;
+ }
+ return err;
+ }
+
+ dev_vdbg(rdev_get_dev(info->rdev),
+ "regulator-%s-probed\n", info->desc.name);
+ }
+
+ return 0;
+}
+
+static int __exit db8500_regulator_remove(struct platform_device *pdev)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(db8500_regulator_info); i++) {
+ struct db8500_regulator_info *info;
+ info = &db8500_regulator_info[i];
+
+ dev_vdbg(rdev_get_dev(info->rdev),
+ "regulator-%s-remove\n", info->desc.name);
+
+ regulator_unregister(info->rdev);
+ }
+
+ return 0;
+}
+
+static struct platform_driver db8500_regulator_driver = {
+ .driver = {
+ .name = "db8500-regulators",
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(db8500_regulator_remove),
+};
+
+static int __init db8500_regulator_init(void)
+{
+ int ret;
+
+ ret = platform_driver_probe(&db8500_regulator_driver,
+ db8500_regulator_probe);
+ if (ret < 0) {
+ pr_info("db8500_regulator: platform_driver_register fails\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static void __exit db8500_regulator_exit(void)
+{
+ platform_driver_unregister(&db8500_regulator_driver);
+}
+
+arch_initcall(db8500_regulator_init);
+module_exit(db8500_regulator_exit);
+
+MODULE_AUTHOR("STMicroelectronics/ST-Ericsson");
+MODULE_DESCRIPTION("DB8500 regulator driver");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-ux500/regulator-db8500.h b/arch/arm/mach-ux500/regulator-db8500.h
new file mode 100644
index 0000000..6120623
--- /dev/null
+++ b/arch/arm/mach-ux500/regulator-db8500.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Author: Bengt Jonsson <bengt.g.jonsson at stericsson.com> for ST-Ericsson
+ *
+ * Interface to power domain regulators on DB8500
+ */
+
+#ifndef __REGULATOR_H__
+#define __REGULATOR_H__
+
+/* Number of DB8500 regulators and regulator enumeration */
+enum db8500_regulator_id {
+ DB8500_REGULATOR_VAPE,
+ DB8500_REGULATOR_VARM,
+ DB8500_REGULATOR_VMODEM,
+ DB8500_REGULATOR_VPLL,
+ DB8500_REGULATOR_VSMPS1,
+ DB8500_REGULATOR_VSMPS2,
+ DB8500_REGULATOR_VSMPS3,
+ DB8500_REGULATOR_VRF1,
+ DB8500_REGULATOR_SWITCH_SVAMMDSP,
+ DB8500_REGULATOR_SWITCH_SVAMMDSPRET,
+ DB8500_REGULATOR_SWITCH_SVAPIPE,
+ DB8500_REGULATOR_SWITCH_SIAMMDSP,
+ DB8500_REGULATOR_SWITCH_SIAMMDSPRET,
+ DB8500_REGULATOR_SWITCH_SIAPIPE,
+ DB8500_REGULATOR_SWITCH_SGA,
+ DB8500_REGULATOR_SWITCH_B2R2_MCDE,
+ DB8500_REGULATOR_SWITCH_ESRAM12,
+ DB8500_REGULATOR_SWITCH_ESRAM12RET,
+ DB8500_REGULATOR_SWITCH_ESRAM34,
+ DB8500_REGULATOR_SWITCH_ESRAM34RET,
+ DB8500_NUM_REGULATORS
+};
+
+/*
+ * Exported interface for CPUIdle only. This function is called with all
+ * interrupts turned off.
+ */
+int power_state_active_is_enabled(void);
+
+#endif
--
1.7.3.2
More information about the linux-arm-kernel
mailing list