[PATCH 07/10] gpio: move the Nomadik GPIO driver to drivers/gpio
Linus Walleij
linus.walleij at stericsson.com
Wed Apr 27 09:14:12 EDT 2011
From: Linus Walleij <linus.walleij at linaro.org>
This takes the Nomadik GPIO driver out of the plat-nomadik
directory and pushes it down into drivers/gpio where it belongs.
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
arch/arm/mach-nomadik/Kconfig | 2 +-
arch/arm/mach-nomadik/board-nhk8815.c | 1 +
arch/arm/mach-nomadik/cpu-8815.c | 1 +
arch/arm/mach-nomadik/i2c-8815nhk.c | 2 +-
arch/arm/mach-nomadik/include/mach/gpio.h | 8 +++++++-
arch/arm/mach-ux500/Kconfig | 2 +-
arch/arm/mach-ux500/board-mop500-pins.c | 2 +-
arch/arm/mach-ux500/board-mop500-sdi.c | 1 +
arch/arm/mach-ux500/board-u5500-sdi.c | 2 +-
arch/arm/mach-ux500/cpu-db5500.c | 3 +--
arch/arm/mach-ux500/cpu-db8500.c | 2 +-
arch/arm/mach-ux500/devices-common.c | 3 +--
arch/arm/mach-ux500/include/mach/gpio.h | 8 +++++++-
arch/arm/plat-nomadik/Kconfig | 5 -----
arch/arm/plat-nomadik/Makefile | 1 -
drivers/gpio/Kconfig | 8 ++++++++
drivers/gpio/Makefile | 1 +
.../gpio.c => drivers/gpio/nomadik-gpio.c | 1 +
.../plat/gpio.h => include/linux/gpio/nomadik.h | 18 +++---------------
19 files changed, 38 insertions(+), 33 deletions(-)
rename arch/arm/plat-nomadik/gpio.c => drivers/gpio/nomadik-gpio.c (99%)
rename arch/arm/plat-nomadik/include/plat/gpio.h => include/linux/gpio/nomadik.h (82%)
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 71f3ea6..acecb73 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -6,7 +6,7 @@ config MACH_NOMADIK_8815NHK
bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
select NOMADIK_8815
select HAS_MTU
- select NOMADIK_GPIO
+ select GPIO_NOMADIK
endmenu
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 1399303..de7a1c1 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -16,6 +16,7 @@
#include <linux/amba/bus.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
+#include <linux/gpio/nomadik.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/onenand.h>
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index ac58e3b..671bdee 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -22,6 +22,7 @@
#include <linux/amba/bus.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/gpio/nomadik.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c
index abfe25a..a6c7dc4 100644
--- a/arch/arm/mach-nomadik/i2c-8815nhk.c
+++ b/arch/arm/mach-nomadik/i2c-8815nhk.c
@@ -3,7 +3,7 @@
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <linux/i2c-gpio.h>
-#include <linux/gpio.h>
+#include <linux/gpio/nomadik.h>
#include <linux/platform_device.h>
/*
diff --git a/arch/arm/mach-nomadik/include/mach/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h
index 7a81a04..2bbfa36 100644
--- a/arch/arm/mach-nomadik/include/mach/gpio.h
+++ b/arch/arm/mach-nomadik/include/mach/gpio.h
@@ -1,6 +1,12 @@
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H
-#include <plat/gpio.h>
+#include <asm-generic/gpio.h>
+
+/* Invoke gpiolibs gpio_chip abstraction */
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 5862601..df83a37 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -5,7 +5,7 @@ config UX500_SOC_COMMON
default y
select ARM_GIC
select HAS_MTU
- select NOMADIK_GPIO
+ select GPIO_NOMADIK
select ARM_ERRATA_753970
menu "Ux500 SoC"
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index fd4cf1c..9af4a4f 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -6,7 +6,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/gpio.h>
+#include <linux/gpio/nomadik.h>
#include <asm/mach-types.h>
#include <plat/pincfg.h>
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index bf0b024..5c008f6 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -7,6 +7,7 @@
#include <linux/kernel.h>
#include <linux/gpio.h>
+#include <linux/gpio/nomadik.h>
#include <linux/amba/bus.h>
#include <linux/amba/mmci.h>
#include <linux/mmc/host.h>
diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c
index 739fb4c..16e87eb 100644
--- a/arch/arm/mach-ux500/board-u5500-sdi.c
+++ b/arch/arm/mach-ux500/board-u5500-sdi.c
@@ -7,7 +7,7 @@
#include <linux/amba/mmci.h>
#include <linux/mmc/host.h>
-#include <linux/gpio.h>
+#include <linux/gpio/nomadik.h>
#include <plat/pincfg.h>
#include <mach/db5500-regs.h>
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index c9dc2ef..b227ce8 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -9,12 +9,11 @@
#include <linux/amba/bus.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/gpio/nomadik.h>
#include <asm/mach/map.h>
#include <asm/pmu.h>
-#include <plat/gpio.h>
-
#include <mach/hardware.h>
#include <mach/devices.h>
#include <mach/setup.h>
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 516126c..f87f37c 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -14,7 +14,7 @@
#include <linux/amba/bus.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/gpio.h>
+#include <linux/gpio/nomadik.h>
#include <linux/platform_device.h>
#include <linux/io.h>
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index 13a4ce0..7418552 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -12,8 +12,7 @@
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
-
-#include <plat/gpio.h>
+#include <linux/gpio/nomadik.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h
index 3c4cd31..cde655c 100644
--- a/arch/arm/mach-ux500/include/mach/gpio.h
+++ b/arch/arm/mach-ux500/include/mach/gpio.h
@@ -7,6 +7,12 @@
*/
#define ARCH_NR_GPIOS 350
-#include <plat/gpio.h>
+#include <asm-generic/gpio.h>
+
+/* Invoke gpiolibs gpio_chip abstraction */
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig
index 187f4e8..d5c7986 100644
--- a/arch/arm/plat-nomadik/Kconfig
+++ b/arch/arm/plat-nomadik/Kconfig
@@ -20,9 +20,4 @@ config HAS_MTU
to multiple interrupt generating programmable
32-bit free running decrementing counters.
-config NOMADIK_GPIO
- bool
- help
- Support for the Nomadik GPIO controller.
-
endif
diff --git a/arch/arm/plat-nomadik/Makefile b/arch/arm/plat-nomadik/Makefile
index c335473..37c7cdd 100644
--- a/arch/arm/plat-nomadik/Makefile
+++ b/arch/arm/plat-nomadik/Makefile
@@ -3,4 +3,3 @@
# Licensed under GPLv2
obj-$(CONFIG_HAS_MTU) += timer.o
-obj-$(CONFIG_NOMADIK_GPIO) += gpio.o
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index cc89dfa..c23401f 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -128,6 +128,14 @@ config GPIO_U300
COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
ports of 8 GPIO pins each.
+config GPIO_NOMADIK
+ bool "ST-Ericsson Nomadik GPIO"
+ depends on GPIOLIB && (ARCH_U8500 || ARCH_NOMADIK)
+ help
+ Say yes here to support GPIO interface for ST-Ericsson Nomadik.
+ This is found in the Nomadik NHK8815, DB8500, DB5500 SoCs
+ for example.
+
config GPIO_VX855
tristate "VIA VX855/VX875 GPIO"
depends on GPIOLIB && MFD_SUPPORT && PCI
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 26032b1..e4851c5 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_GPIO_WM8350) += wm8350-gpiolib.o
obj-$(CONFIG_GPIO_WM8994) += wm8994-gpio.o
obj-$(CONFIG_GPIO_SCH) += sch_gpio.o
obj-$(CONFIG_GPIO_U300) += u300-gpio.o
+obj-$(CONFIG_GPIO_NOMADIK) += nomadik-gpio.o
obj-$(CONFIG_GPIO_RDC321X) += rdc321x-gpio.o
obj-$(CONFIG_GPIO_JANZ_TTL) += janz-ttl.o
obj-$(CONFIG_GPIO_SX150X) += sx150x.o
diff --git a/arch/arm/plat-nomadik/gpio.c b/drivers/gpio/nomadik-gpio.c
similarity index 99%
rename from arch/arm/plat-nomadik/gpio.c
rename to drivers/gpio/nomadik-gpio.c
index b81f0d5..dd2d728 100644
--- a/arch/arm/plat-nomadik/gpio.c
+++ b/drivers/gpio/nomadik-gpio.c
@@ -22,6 +22,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/slab.h>
+#include <linux/gpio/nomadik.h>
#include <plat/pincfg.h>
#include <mach/hardware.h>
diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/include/linux/gpio/nomadik.h
similarity index 82%
rename from arch/arm/plat-nomadik/include/plat/gpio.h
rename to include/linux/gpio/nomadik.h
index dfdd4e7..539dda8 100644
--- a/arch/arm/plat-nomadik/include/plat/gpio.h
+++ b/include/linux/gpio/nomadik.h
@@ -9,20 +9,8 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#ifndef __ASM_PLAT_GPIO_H
-#define __ASM_PLAT_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-/*
- * These currently cause a function call to happen, they may be optimized
- * if needed by adding cpu-specific defines to identify blocks
- * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc)
- */
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
+#ifndef __GPIO_NOMADIK_H
+#define __GPIO_NOMADIK_H
/*
* "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
@@ -95,4 +83,4 @@ struct nmk_gpio_platform_data {
void (*set_ioforce)(bool enable);
};
-#endif /* __ASM_PLAT_GPIO_H */
+#endif
--
1.7.3.2
More information about the linux-arm-kernel
mailing list