[PATCH 4/7] pxa25x: separate lubbock handling to lubbock-usb transceiver
Eric Miao
eric.y.miao at gmail.com
Mon Apr 4 03:04:17 EDT 2011
David,
Let me know if you're OK I take this patch, as several others following
have dependency on this one.
On Mon, Apr 4, 2011 at 3:01 PM, Eric Miao <eric.y.miao at gmail.com> wrote:
> On Fri, Apr 1, 2011 at 9:56 PM, Dmitry Eremin-Solenikov
> <dbaryshkov at gmail.com> wrote:
>> Move all handling of lubbock board to separate lubbock-usb transceiver,
>> removing cruft from pxa25x_udc.
>>
>> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
>
> I like this change very much. It would be perfect if someone can actually
> test this, but provided Lubbock is no way popular these days, it would
> just be fine.
>
> Acked-by: Eric Miao <eric.y.miao at gmail.com>
>
>> ---
>> drivers/usb/gadget/pxa25x_udc.c | 74 ----------------
>> drivers/usb/otg/Kconfig | 8 ++
>> drivers/usb/otg/Makefile | 1 +
>> drivers/usb/otg/lubbock-usb.c | 178 +++++++++++++++++++++++++++++++++++++++
>> 4 files changed, 187 insertions(+), 74 deletions(-)
>> create mode 100644 drivers/usb/otg/lubbock-usb.c
>>
>> diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
>> index 444b60a..6cb32b8 100644
>> --- a/drivers/usb/gadget/pxa25x_udc.c
>> +++ b/drivers/usb/gadget/pxa25x_udc.c
>> @@ -65,10 +65,6 @@
>> #include <mach/pxa25x-udc.h>
>> #endif
>>
>> -#ifdef CONFIG_ARCH_LUBBOCK
>> -#include <mach/lubbock.h>
>> -#endif
>> -
>> #include <asm/mach/udc_pxa2xx.h>
>>
>>
>> @@ -1383,42 +1379,6 @@ EXPORT_SYMBOL(usb_gadget_unregister_driver);
>>
>> /*-------------------------------------------------------------------------*/
>>
>> -#ifdef CONFIG_ARCH_LUBBOCK
>> -
>> -/* Lubbock has separate connect and disconnect irqs. More typical designs
>> - * use one GPIO as the VBUS IRQ, and another to control the D+ pullup.
>> - */
>> -
>> -static irqreturn_t
>> -lubbock_vbus_irq(int irq, void *_dev)
>> -{
>> - struct pxa25x_udc *dev = _dev;
>> - int vbus;
>> -
>> - dev->stats.irqs++;
>> - switch (irq) {
>> - case LUBBOCK_USB_IRQ:
>> - vbus = 1;
>> - disable_irq(LUBBOCK_USB_IRQ);
>> - enable_irq(LUBBOCK_USB_DISC_IRQ);
>> - break;
>> - case LUBBOCK_USB_DISC_IRQ:
>> - vbus = 0;
>> - disable_irq(LUBBOCK_USB_DISC_IRQ);
>> - enable_irq(LUBBOCK_USB_IRQ);
>> - break;
>> - default:
>> - return IRQ_NONE;
>> - }
>> -
>> - pxa25x_udc_vbus_session(&dev->gadget, vbus);
>> - return IRQ_HANDLED;
>> -}
>> -
>> -#endif
>> -
>> -
>> -/*-------------------------------------------------------------------------*/
>>
>> static inline void clear_ep_state (struct pxa25x_udc *dev)
>> {
>> @@ -2206,38 +2166,10 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
>> }
>> dev->got_irq = 1;
>>
>> -#ifdef CONFIG_ARCH_LUBBOCK
>> - if (machine_is_lubbock()) {
>> - retval = request_irq(LUBBOCK_USB_DISC_IRQ,
>> - lubbock_vbus_irq,
>> - IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
>> - driver_name, dev);
>> - if (retval != 0) {
>> - pr_err("%s: can't get irq %i, err %d\n",
>> - driver_name, LUBBOCK_USB_DISC_IRQ, retval);
>> -lubbock_fail0:
>> - goto err_irq_lub;
>> - }
>> - retval = request_irq(LUBBOCK_USB_IRQ,
>> - lubbock_vbus_irq,
>> - IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
>> - driver_name, dev);
>> - if (retval != 0) {
>> - pr_err("%s: can't get irq %i, err %d\n",
>> - driver_name, LUBBOCK_USB_IRQ, retval);
>> - free_irq(LUBBOCK_USB_DISC_IRQ, dev);
>> - goto lubbock_fail0;
>> - }
>> - } else
>> -#endif
>> create_debug_files(dev);
>>
>> return 0;
>>
>> -#ifdef CONFIG_ARCH_LUBBOCK
>> - free_irq(LUBBOCK_USB_DISC_IRQ, dev);
>> - err_irq_lub:
>> -#endif
>> free_irq(irq, dev);
>> err_irq1:
>> if (gpio_is_valid(dev->mach->gpio_pullup))
>> @@ -2273,12 +2205,6 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
>> free_irq(platform_get_irq(pdev, 0), dev);
>> dev->got_irq = 0;
>> }
>> -#ifdef CONFIG_ARCH_LUBBOCK
>> - if (machine_is_lubbock()) {
>> - free_irq(LUBBOCK_USB_DISC_IRQ, dev);
>> - free_irq(LUBBOCK_USB_IRQ, dev);
>> - }
>> -#endif
>> if (gpio_is_valid(dev->mach->gpio_pullup))
>> gpio_free(dev->mach->gpio_pullup);
>>
>> diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
>> index daf3e5f..7ddfc54 100644
>> --- a/drivers/usb/otg/Kconfig
>> +++ b/drivers/usb/otg/Kconfig
>> @@ -122,4 +122,12 @@ config AB8500_USB
>> This transceiver supports high and full speed devices plus,
>> in host mode, low speed.
>>
>> +config LUBBOCK_USB
>> + tristate "Intel DBPXA250 (Lubbock) Tranceiver Driver"
>> + depends on ARCH_LUBBOCK
>> + select USB_OTG_UTILS
>> + help
>> + Enable this to support the USB UDC connectivity on Intel DBPXA250
>> + development platform (so-called Lubbock).
>> +
>> endif # USB || OTG
>> diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
>> index e22d917..5ed42cd 100644
>> --- a/drivers/usb/otg/Makefile
>> +++ b/drivers/usb/otg/Makefile
>> @@ -19,3 +19,4 @@ obj-$(CONFIG_USB_ULPI) += ulpi.o
>> obj-$(CONFIG_USB_ULPI_VIEWPORT) += ulpi_viewport.o
>> obj-$(CONFIG_USB_MSM_OTG) += msm_otg.o
>> obj-$(CONFIG_AB8500_USB) += ab8500-usb.o
>> +obj-$(CONFIG_LUBBOCK_USB) += lubbock-usb.o
>> diff --git a/drivers/usb/otg/lubbock-usb.c b/drivers/usb/otg/lubbock-usb.c
>> new file mode 100644
>> index 0000000..d18c101
>> --- /dev/null
>> +++ b/drivers/usb/otg/lubbock-usb.c
>> @@ -0,0 +1,178 @@
>> +/*
>> + * Intel DBPXA250 Development Platform USB UDC support
>> + *
>> + * Copyright (C) 2011 Dmitry Eremin-Solenikov
>> + *
>> + * Based on pxa25x_udc driver:
>> + * Copyright (C) 2002 Intrinsyc, Inc. (Frank Becker)
>> + * Copyright (C) 2003 Robert Schwebel, Pengutronix
>> + * Copyright (C) 2003 Benedikt Spranger, Pengutronix
>> + * Copyright (C) 2003 David Brownell
>> + * Copyright (C) 2003 Joshua Wise
>> + *
>> + * Largely based on lubbock-usb-xceiv:
>> + * Copyright (C) 2009 Texas Instruments Inc
>> + */
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/dma-mapping.h>
>> +#include <linux/usb.h>
>> +#include <linux/usb/gadget.h>
>> +#include <linux/usb/otg.h>
>> +#include <linux/slab.h>
>> +#include <linux/interrupt.h>
>> +
>> +#include <mach/lubbock.h>
>> +
>> +static int lubbock_udc_is_connected(void)
>> +{
>> + return (LUB_MISC_RD & (1 << 9)) == 0;
>> +}
>> +
>> +static int lubbock_set_peripheral(struct otg_transceiver *lubbock,
>> + struct usb_gadget *gadget)
>> +{
>> + if (!lubbock)
>> + return -ENODEV;
>> +
>> + if (!gadget) {
>> + lubbock->gadget = NULL;
>> + return 0;
>> + }
>> +
>> + lubbock->gadget = gadget;
>> + lubbock->state = OTG_STATE_B_IDLE;
>> + if (lubbock_udc_is_connected()) {
>> + lubbock->state = OTG_STATE_B_PERIPHERAL;
>> + usb_gadget_vbus_connect(lubbock->gadget);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +/* Lubbock has separate connect and disconnect irqs. More typical designs
>> + * use one GPIO as the VBUS IRQ, and another to control the D+ pullup.
>> + */
>> +
>> +static irqreturn_t
>> +lubbock_vbus_irq(int irq, void *_dev)
>> +{
>> + struct otg_transceiver *lubbock = _dev;
>> + switch (irq) {
>> + case LUBBOCK_USB_IRQ:
>> + lubbock->state = OTG_STATE_B_PERIPHERAL;
>> + usb_gadget_vbus_connect(lubbock->gadget);
>> +
>> + disable_irq(LUBBOCK_USB_IRQ);
>> + enable_irq(LUBBOCK_USB_DISC_IRQ);
>> + break;
>> + case LUBBOCK_USB_DISC_IRQ:
>> + usb_gadget_vbus_disconnect(lubbock->gadget);
>> + lubbock->state = OTG_STATE_B_IDLE;
>> +
>> + disable_irq(LUBBOCK_USB_DISC_IRQ);
>> + enable_irq(LUBBOCK_USB_IRQ);
>> + break;
>> + default:
>> + return IRQ_NONE;
>> + }
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +
>> +static int __devinit lubbock_usb_xceiv_probe(struct platform_device *pdev)
>> +{
>> + struct otg_transceiver *lubbock;
>> + int err;
>> +
>> + lubbock = kzalloc(sizeof *lubbock, GFP_KERNEL);
>> + if (!lubbock)
>> + return -ENOMEM;
>> +
>> + lubbock->dev = &pdev->dev;
>> + lubbock->label = "lubbock-xceiv";
>> + lubbock->state = OTG_STATE_UNDEFINED;
>> + lubbock->set_peripheral = lubbock_set_peripheral;
>> +
>> + err = request_irq(LUBBOCK_USB_DISC_IRQ,
>> + lubbock_vbus_irq,
>> + IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
>> + lubbock->label, lubbock);
>> + if (err != 0) {
>> + pr_err("%s: can't get irq %i, err %d\n",
>> + lubbock->label, LUBBOCK_USB_DISC_IRQ, err);
>> + goto err_irq_lub;
>> + }
>> + err = request_irq(LUBBOCK_USB_IRQ,
>> + lubbock_vbus_irq,
>> + IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
>> + lubbock->label, lubbock);
>> + if (err != 0) {
>> + pr_err("%s: can't get irq %i, err %d\n",
>> + lubbock->label, LUBBOCK_USB_IRQ, err);
>> + goto err_irq_lub2;
>> + }
>> +
>> + err = otg_set_transceiver(lubbock);
>> + if (err) {
>> + dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
>> + err);
>> + goto exit;
>> + }
>> +
>> + platform_set_drvdata(pdev, lubbock);
>> +
>> + BLOCKING_INIT_NOTIFIER_HEAD(&lubbock->notifier);
>> +
>> + return 0;
>> +exit:
>> + free_irq(LUBBOCK_USB_IRQ, lubbock);
>> +err_irq_lub2:
>> + free_irq(LUBBOCK_USB_DISC_IRQ, lubbock);
>> +err_irq_lub:
>> + kfree(lubbock);
>> + return err;
>> +}
>> +
>> +static int __devexit lubbock_usb_xceiv_remove(struct platform_device *pdev)
>> +{
>> + struct otg_transceiver *lubbock = platform_get_drvdata(pdev);
>> +
>> + otg_set_transceiver(NULL);
>> +
>> + platform_set_drvdata(pdev, NULL);
>> +
>> + free_irq(LUBBOCK_USB_IRQ, lubbock);
>> + free_irq(LUBBOCK_USB_DISC_IRQ, lubbock);
>> +
>> + kfree(lubbock);
>> +
>> + return 0;
>> +}
>> +
>> +static struct platform_driver lubbock_usb_xceiv_driver = {
>> + .probe = lubbock_usb_xceiv_probe,
>> + .remove = __devexit_p(lubbock_usb_xceiv_remove),
>> + .driver = {
>> + .name = "lubbock_usb_xceiv",
>> + .owner = THIS_MODULE,
>> + },
>> +};
>> +
>> +static int __init lubbock_usb_xceiv_init(void)
>> +{
>> + return platform_driver_register(&lubbock_usb_xceiv_driver);
>> +}
>> +subsys_initcall(lubbock_usb_xceiv_init);
>> +
>> +static void __exit lubbock_usb_xceiv_exit(void)
>> +{
>> + platform_driver_unregister(&lubbock_usb_xceiv_driver);
>> +}
>> +module_exit(lubbock_usb_xceiv_exit);
>> +
>> +MODULE_ALIAS("platform:lubbock_usb_xceiv");
>> +MODULE_DESCRIPTION("lubbock USB Transceiver driver");
>> +MODULE_LICENSE("GPL");
>> +
>> --
>> 1.7.4.1
>>
>>
>
More information about the linux-arm-kernel
mailing list