[PATCH 4/7] pxa25x: separate lubbock handling to lubbock-usb transceiver
Eric Miao
eric.y.miao at gmail.com
Mon Apr 4 03:01:01 EDT 2011
On Fri, Apr 1, 2011 at 9:56 PM, Dmitry Eremin-Solenikov
<dbaryshkov at gmail.com> wrote:
> Move all handling of lubbock board to separate lubbock-usb transceiver,
> removing cruft from pxa25x_udc.
>
> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
I like this change very much. It would be perfect if someone can actually
test this, but provided Lubbock is no way popular these days, it would
just be fine.
Acked-by: Eric Miao <eric.y.miao at gmail.com>
> ---
> drivers/usb/gadget/pxa25x_udc.c | 74 ----------------
> drivers/usb/otg/Kconfig | 8 ++
> drivers/usb/otg/Makefile | 1 +
> drivers/usb/otg/lubbock-usb.c | 178 +++++++++++++++++++++++++++++++++++++++
> 4 files changed, 187 insertions(+), 74 deletions(-)
> create mode 100644 drivers/usb/otg/lubbock-usb.c
>
> diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
> index 444b60a..6cb32b8 100644
> --- a/drivers/usb/gadget/pxa25x_udc.c
> +++ b/drivers/usb/gadget/pxa25x_udc.c
> @@ -65,10 +65,6 @@
> #include <mach/pxa25x-udc.h>
> #endif
>
> -#ifdef CONFIG_ARCH_LUBBOCK
> -#include <mach/lubbock.h>
> -#endif
> -
> #include <asm/mach/udc_pxa2xx.h>
>
>
> @@ -1383,42 +1379,6 @@ EXPORT_SYMBOL(usb_gadget_unregister_driver);
>
> /*-------------------------------------------------------------------------*/
>
> -#ifdef CONFIG_ARCH_LUBBOCK
> -
> -/* Lubbock has separate connect and disconnect irqs. More typical designs
> - * use one GPIO as the VBUS IRQ, and another to control the D+ pullup.
> - */
> -
> -static irqreturn_t
> -lubbock_vbus_irq(int irq, void *_dev)
> -{
> - struct pxa25x_udc *dev = _dev;
> - int vbus;
> -
> - dev->stats.irqs++;
> - switch (irq) {
> - case LUBBOCK_USB_IRQ:
> - vbus = 1;
> - disable_irq(LUBBOCK_USB_IRQ);
> - enable_irq(LUBBOCK_USB_DISC_IRQ);
> - break;
> - case LUBBOCK_USB_DISC_IRQ:
> - vbus = 0;
> - disable_irq(LUBBOCK_USB_DISC_IRQ);
> - enable_irq(LUBBOCK_USB_IRQ);
> - break;
> - default:
> - return IRQ_NONE;
> - }
> -
> - pxa25x_udc_vbus_session(&dev->gadget, vbus);
> - return IRQ_HANDLED;
> -}
> -
> -#endif
> -
> -
> -/*-------------------------------------------------------------------------*/
>
> static inline void clear_ep_state (struct pxa25x_udc *dev)
> {
> @@ -2206,38 +2166,10 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
> }
> dev->got_irq = 1;
>
> -#ifdef CONFIG_ARCH_LUBBOCK
> - if (machine_is_lubbock()) {
> - retval = request_irq(LUBBOCK_USB_DISC_IRQ,
> - lubbock_vbus_irq,
> - IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
> - driver_name, dev);
> - if (retval != 0) {
> - pr_err("%s: can't get irq %i, err %d\n",
> - driver_name, LUBBOCK_USB_DISC_IRQ, retval);
> -lubbock_fail0:
> - goto err_irq_lub;
> - }
> - retval = request_irq(LUBBOCK_USB_IRQ,
> - lubbock_vbus_irq,
> - IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
> - driver_name, dev);
> - if (retval != 0) {
> - pr_err("%s: can't get irq %i, err %d\n",
> - driver_name, LUBBOCK_USB_IRQ, retval);
> - free_irq(LUBBOCK_USB_DISC_IRQ, dev);
> - goto lubbock_fail0;
> - }
> - } else
> -#endif
> create_debug_files(dev);
>
> return 0;
>
> -#ifdef CONFIG_ARCH_LUBBOCK
> - free_irq(LUBBOCK_USB_DISC_IRQ, dev);
> - err_irq_lub:
> -#endif
> free_irq(irq, dev);
> err_irq1:
> if (gpio_is_valid(dev->mach->gpio_pullup))
> @@ -2273,12 +2205,6 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
> free_irq(platform_get_irq(pdev, 0), dev);
> dev->got_irq = 0;
> }
> -#ifdef CONFIG_ARCH_LUBBOCK
> - if (machine_is_lubbock()) {
> - free_irq(LUBBOCK_USB_DISC_IRQ, dev);
> - free_irq(LUBBOCK_USB_IRQ, dev);
> - }
> -#endif
> if (gpio_is_valid(dev->mach->gpio_pullup))
> gpio_free(dev->mach->gpio_pullup);
>
> diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
> index daf3e5f..7ddfc54 100644
> --- a/drivers/usb/otg/Kconfig
> +++ b/drivers/usb/otg/Kconfig
> @@ -122,4 +122,12 @@ config AB8500_USB
> This transceiver supports high and full speed devices plus,
> in host mode, low speed.
>
> +config LUBBOCK_USB
> + tristate "Intel DBPXA250 (Lubbock) Tranceiver Driver"
> + depends on ARCH_LUBBOCK
> + select USB_OTG_UTILS
> + help
> + Enable this to support the USB UDC connectivity on Intel DBPXA250
> + development platform (so-called Lubbock).
> +
> endif # USB || OTG
> diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
> index e22d917..5ed42cd 100644
> --- a/drivers/usb/otg/Makefile
> +++ b/drivers/usb/otg/Makefile
> @@ -19,3 +19,4 @@ obj-$(CONFIG_USB_ULPI) += ulpi.o
> obj-$(CONFIG_USB_ULPI_VIEWPORT) += ulpi_viewport.o
> obj-$(CONFIG_USB_MSM_OTG) += msm_otg.o
> obj-$(CONFIG_AB8500_USB) += ab8500-usb.o
> +obj-$(CONFIG_LUBBOCK_USB) += lubbock-usb.o
> diff --git a/drivers/usb/otg/lubbock-usb.c b/drivers/usb/otg/lubbock-usb.c
> new file mode 100644
> index 0000000..d18c101
> --- /dev/null
> +++ b/drivers/usb/otg/lubbock-usb.c
> @@ -0,0 +1,178 @@
> +/*
> + * Intel DBPXA250 Development Platform USB UDC support
> + *
> + * Copyright (C) 2011 Dmitry Eremin-Solenikov
> + *
> + * Based on pxa25x_udc driver:
> + * Copyright (C) 2002 Intrinsyc, Inc. (Frank Becker)
> + * Copyright (C) 2003 Robert Schwebel, Pengutronix
> + * Copyright (C) 2003 Benedikt Spranger, Pengutronix
> + * Copyright (C) 2003 David Brownell
> + * Copyright (C) 2003 Joshua Wise
> + *
> + * Largely based on lubbock-usb-xceiv:
> + * Copyright (C) 2009 Texas Instruments Inc
> + */
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/usb.h>
> +#include <linux/usb/gadget.h>
> +#include <linux/usb/otg.h>
> +#include <linux/slab.h>
> +#include <linux/interrupt.h>
> +
> +#include <mach/lubbock.h>
> +
> +static int lubbock_udc_is_connected(void)
> +{
> + return (LUB_MISC_RD & (1 << 9)) == 0;
> +}
> +
> +static int lubbock_set_peripheral(struct otg_transceiver *lubbock,
> + struct usb_gadget *gadget)
> +{
> + if (!lubbock)
> + return -ENODEV;
> +
> + if (!gadget) {
> + lubbock->gadget = NULL;
> + return 0;
> + }
> +
> + lubbock->gadget = gadget;
> + lubbock->state = OTG_STATE_B_IDLE;
> + if (lubbock_udc_is_connected()) {
> + lubbock->state = OTG_STATE_B_PERIPHERAL;
> + usb_gadget_vbus_connect(lubbock->gadget);
> + }
> +
> + return 0;
> +}
> +
> +/* Lubbock has separate connect and disconnect irqs. More typical designs
> + * use one GPIO as the VBUS IRQ, and another to control the D+ pullup.
> + */
> +
> +static irqreturn_t
> +lubbock_vbus_irq(int irq, void *_dev)
> +{
> + struct otg_transceiver *lubbock = _dev;
> + switch (irq) {
> + case LUBBOCK_USB_IRQ:
> + lubbock->state = OTG_STATE_B_PERIPHERAL;
> + usb_gadget_vbus_connect(lubbock->gadget);
> +
> + disable_irq(LUBBOCK_USB_IRQ);
> + enable_irq(LUBBOCK_USB_DISC_IRQ);
> + break;
> + case LUBBOCK_USB_DISC_IRQ:
> + usb_gadget_vbus_disconnect(lubbock->gadget);
> + lubbock->state = OTG_STATE_B_IDLE;
> +
> + disable_irq(LUBBOCK_USB_DISC_IRQ);
> + enable_irq(LUBBOCK_USB_IRQ);
> + break;
> + default:
> + return IRQ_NONE;
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +
> +static int __devinit lubbock_usb_xceiv_probe(struct platform_device *pdev)
> +{
> + struct otg_transceiver *lubbock;
> + int err;
> +
> + lubbock = kzalloc(sizeof *lubbock, GFP_KERNEL);
> + if (!lubbock)
> + return -ENOMEM;
> +
> + lubbock->dev = &pdev->dev;
> + lubbock->label = "lubbock-xceiv";
> + lubbock->state = OTG_STATE_UNDEFINED;
> + lubbock->set_peripheral = lubbock_set_peripheral;
> +
> + err = request_irq(LUBBOCK_USB_DISC_IRQ,
> + lubbock_vbus_irq,
> + IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
> + lubbock->label, lubbock);
> + if (err != 0) {
> + pr_err("%s: can't get irq %i, err %d\n",
> + lubbock->label, LUBBOCK_USB_DISC_IRQ, err);
> + goto err_irq_lub;
> + }
> + err = request_irq(LUBBOCK_USB_IRQ,
> + lubbock_vbus_irq,
> + IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
> + lubbock->label, lubbock);
> + if (err != 0) {
> + pr_err("%s: can't get irq %i, err %d\n",
> + lubbock->label, LUBBOCK_USB_IRQ, err);
> + goto err_irq_lub2;
> + }
> +
> + err = otg_set_transceiver(lubbock);
> + if (err) {
> + dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
> + err);
> + goto exit;
> + }
> +
> + platform_set_drvdata(pdev, lubbock);
> +
> + BLOCKING_INIT_NOTIFIER_HEAD(&lubbock->notifier);
> +
> + return 0;
> +exit:
> + free_irq(LUBBOCK_USB_IRQ, lubbock);
> +err_irq_lub2:
> + free_irq(LUBBOCK_USB_DISC_IRQ, lubbock);
> +err_irq_lub:
> + kfree(lubbock);
> + return err;
> +}
> +
> +static int __devexit lubbock_usb_xceiv_remove(struct platform_device *pdev)
> +{
> + struct otg_transceiver *lubbock = platform_get_drvdata(pdev);
> +
> + otg_set_transceiver(NULL);
> +
> + platform_set_drvdata(pdev, NULL);
> +
> + free_irq(LUBBOCK_USB_IRQ, lubbock);
> + free_irq(LUBBOCK_USB_DISC_IRQ, lubbock);
> +
> + kfree(lubbock);
> +
> + return 0;
> +}
> +
> +static struct platform_driver lubbock_usb_xceiv_driver = {
> + .probe = lubbock_usb_xceiv_probe,
> + .remove = __devexit_p(lubbock_usb_xceiv_remove),
> + .driver = {
> + .name = "lubbock_usb_xceiv",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +static int __init lubbock_usb_xceiv_init(void)
> +{
> + return platform_driver_register(&lubbock_usb_xceiv_driver);
> +}
> +subsys_initcall(lubbock_usb_xceiv_init);
> +
> +static void __exit lubbock_usb_xceiv_exit(void)
> +{
> + platform_driver_unregister(&lubbock_usb_xceiv_driver);
> +}
> +module_exit(lubbock_usb_xceiv_exit);
> +
> +MODULE_ALIAS("platform:lubbock_usb_xceiv");
> +MODULE_DESCRIPTION("lubbock USB Transceiver driver");
> +MODULE_LICENSE("GPL");
> +
> --
> 1.7.4.1
>
>
More information about the linux-arm-kernel
mailing list