[PATCH v2 2/2] msm: board-8960: Add support for pm8921-regulator

David Collins collinsd at codeaurora.org
Fri Apr 29 19:11:07 EDT 2011


Add board-msm8960-regulator.c to contain pm8921-regulator structure
declarations.  The primary configuration table
msm_pm8921_regulator_pdata specifies the following characteristics
for each regulator: if it is always on, if it should have its pull
down set when disabled, its min and max voltage constraints, and its
supply regulator.

Signed-off-by: David Collins <collinsd at codeaurora.org>
---
 arch/arm/mach-msm/Makefile                  |    1 +
 arch/arm/mach-msm/board-msm8960-regulator.c |  306 +++++++++++++++++++++++++++
 arch/arm/mach-msm/board-msm8960.c           |    4 +
 arch/arm/mach-msm/board-msm8960.h           |   23 ++
 4 files changed, 334 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-msm/board-msm8960-regulator.c
 create mode 100644 arch/arm/mach-msm/board-msm8960.h

diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 84d49db..5ee9318 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
 obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
 obj-$(CONFIG_ARCH_MSM8X60) += board-msm8x60.o devices-msm8x60.o
 obj-$(CONFIG_ARCH_MSM8960) += board-msm8960.o devices-msm8960.o
+obj-$(CONFIG_ARCH_MSM8960) += board-msm8960-regulator.o
 
 obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-v1.o gpiomux.o
 obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o
diff --git a/arch/arm/mach-msm/board-msm8960-regulator.c b/arch/arm/mach-msm/board-msm8960-regulator.c
new file mode 100644
index 0000000..08362d8
--- /dev/null
+++ b/arch/arm/mach-msm/board-msm8960-regulator.c
@@ -0,0 +1,306 @@
+/*
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/regulator/pm8921-regulator.h>
+
+#include "board-msm8960.h"
+
+#define PM8921_VREG_CONSUMERS(_id) \
+	static struct regulator_consumer_supply \
+	pm8921_vreg_consumers_##_id[] __devinitdata
+
+/*
+ * Consumer specific regulator names:
+ *			 regulator name		consumer dev_name
+ */
+PM8921_VREG_CONSUMERS(L1) = {
+	REGULATOR_SUPPLY("8921_l1",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(L2) = {
+	REGULATOR_SUPPLY("8921_l2",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(L3) = {
+	REGULATOR_SUPPLY("8921_l3",		"reg-debug-consumer"),
+	REGULATOR_SUPPLY("HSUSB_3p3",		"msm_otg"),
+};
+PM8921_VREG_CONSUMERS(L4) = {
+	REGULATOR_SUPPLY("8921_l4",		"reg-debug-consumer"),
+	REGULATOR_SUPPLY("HSUSB_1p8",		"msm_otg"),
+};
+PM8921_VREG_CONSUMERS(L5) = {
+	REGULATOR_SUPPLY("8921_l5",		"reg-debug-consumer"),
+	REGULATOR_SUPPLY("sdc_vdd",		"msm_sdcc.1"),
+};
+PM8921_VREG_CONSUMERS(L6) = {
+	REGULATOR_SUPPLY("8921_l6",		"reg-debug-consumer"),
+	REGULATOR_SUPPLY("sdc_vdd",		"msm_sdcc.3"),
+};
+PM8921_VREG_CONSUMERS(L7) = {
+	REGULATOR_SUPPLY("8921_l7",		"reg-debug-consumer"),
+	REGULATOR_SUPPLY("sdc_vddp",		"msm_sdcc.3"),
+};
+PM8921_VREG_CONSUMERS(L8) = {
+	REGULATOR_SUPPLY("8921_l8",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(L9) = {
+	REGULATOR_SUPPLY("8921_l9",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(L10) = {
+	REGULATOR_SUPPLY("8921_l10",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(L11) = {
+	REGULATOR_SUPPLY("8921_l11",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(L12) = {
+	REGULATOR_SUPPLY("8921_l12",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(L14) = {
+	REGULATOR_SUPPLY("8921_l14",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(L15) = {
+	REGULATOR_SUPPLY("8921_l15",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(L16) = {
+	REGULATOR_SUPPLY("8921_l16",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(L17) = {
+	REGULATOR_SUPPLY("8921_l17",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(L18) = {
+	REGULATOR_SUPPLY("8921_l18",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(L21) = {
+	REGULATOR_SUPPLY("8921_l21",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(L22) = {
+	REGULATOR_SUPPLY("8921_l22",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(L23) = {
+	REGULATOR_SUPPLY("8921_l23",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(L24) = {
+	REGULATOR_SUPPLY("8921_l24",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(L25) = {
+	REGULATOR_SUPPLY("8921_l25",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(L26) = {
+	REGULATOR_SUPPLY("8921_l26",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(L27) = {
+	REGULATOR_SUPPLY("8921_l27",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(L28) = {
+	REGULATOR_SUPPLY("8921_l28",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(L29) = {
+	REGULATOR_SUPPLY("8921_l29",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(S1) = {
+	REGULATOR_SUPPLY("8921_s1",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(S2) = {
+	REGULATOR_SUPPLY("8921_s2",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(S3) = {
+	REGULATOR_SUPPLY("8921_s3",		"reg-debug-consumer"),
+	REGULATOR_SUPPLY("HSUSB_VDDCX",		"msm_otg"),
+};
+PM8921_VREG_CONSUMERS(S4) = {
+	REGULATOR_SUPPLY("8921_s4",		"reg-debug-consumer"),
+	REGULATOR_SUPPLY("sdc_vccq",		"msm_sdcc.1"),
+};
+PM8921_VREG_CONSUMERS(S5) = {
+	REGULATOR_SUPPLY("8921_s5",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(S6) = {
+	REGULATOR_SUPPLY("8921_s6",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(S7) = {
+	REGULATOR_SUPPLY("8921_s7",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(S8) = {
+	REGULATOR_SUPPLY("8921_s8",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(LVS1) = {
+	REGULATOR_SUPPLY("8921_lvs1",		"reg-debug-consumer"),
+	REGULATOR_SUPPLY("sdc_vdd",		"msm_sdcc.4"),
+};
+PM8921_VREG_CONSUMERS(LVS2) = {
+	REGULATOR_SUPPLY("8921_lvs2",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(LVS3) = {
+	REGULATOR_SUPPLY("8921_lvs3",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(LVS4) = {
+	REGULATOR_SUPPLY("8921_lvs4",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(LVS5) = {
+	REGULATOR_SUPPLY("8921_lvs5",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(LVS6) = {
+	REGULATOR_SUPPLY("8921_lvs6",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(LVS7) = {
+	REGULATOR_SUPPLY("8921_lvs7",		"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(USB_OTG) = {
+	REGULATOR_SUPPLY("8921_usb_otg",	"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(HDMI_MVS) = {
+	REGULATOR_SUPPLY("8921_hdmi_mvs",	"reg-debug-consumer"),
+};
+PM8921_VREG_CONSUMERS(NCP) = {
+	REGULATOR_SUPPLY("8921_ncp",		"reg-debug-consumer"),
+};
+
+#define PM8921_VREG_INIT(_id, _min_uV, _max_uV, _modes, _ops, _apply_uV, \
+			 _pull_down, _always_on, _supply_regulator) \
+	{ \
+		.init_data = { \
+			.constraints = { \
+				.valid_modes_mask	= _modes, \
+				.valid_ops_mask		= _ops, \
+				.min_uV			= _min_uV, \
+				.max_uV			= _max_uV, \
+				.input_uV		= _max_uV, \
+				.apply_uV		= _apply_uV, \
+				.always_on		= _always_on, \
+			}, \
+			.num_consumer_supplies	= \
+				ARRAY_SIZE(pm8921_vreg_consumers_##_id), \
+			.consumer_supplies	= pm8921_vreg_consumers_##_id, \
+			.supply_regulator	= _supply_regulator, \
+		}, \
+		.id			= PM8921_VREG_ID_##_id, \
+		.pull_down_enable	= _pull_down, \
+	}
+
+#define PM8921_VREG_INIT_LDO(_id, _always_on, _pull_down, _min_uV, _max_uV, \
+		_supply_regulator) \
+	PM8921_VREG_INIT(_id, _min_uV, _max_uV, REGULATOR_MODE_NORMAL \
+		| REGULATOR_MODE_IDLE, REGULATOR_CHANGE_VOLTAGE | \
+		REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE | \
+		REGULATOR_CHANGE_DRMS, 0, _pull_down, _always_on, \
+		_supply_regulator)
+
+#define PM8921_VREG_INIT_NLDO1200(_id, _always_on, _pull_down, _min_uV, \
+		_max_uV, _supply_regulator) \
+	PM8921_VREG_INIT(_id, _min_uV, _max_uV, REGULATOR_MODE_NORMAL \
+		| REGULATOR_MODE_IDLE, REGULATOR_CHANGE_VOLTAGE | \
+		REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE | \
+		REGULATOR_CHANGE_DRMS, 0, _pull_down, _always_on, \
+		_supply_regulator)
+
+#define PM8921_VREG_INIT_SMPS(_id, _always_on, _pull_down, _min_uV, _max_uV, \
+		_supply_regulator) \
+	PM8921_VREG_INIT(_id, _min_uV, _max_uV, REGULATOR_MODE_NORMAL \
+		| REGULATOR_MODE_IDLE, REGULATOR_CHANGE_VOLTAGE | \
+		REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE | \
+		REGULATOR_CHANGE_DRMS, 0, _pull_down, _always_on, \
+		_supply_regulator)
+
+#define PM8921_VREG_INIT_FTSMPS(_id, _always_on, _pull_down, _min_uV, _max_uV, \
+		_supply_regulator) \
+	PM8921_VREG_INIT(_id, _min_uV, _max_uV, REGULATOR_MODE_NORMAL, \
+		REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS \
+		| REGULATOR_CHANGE_MODE, 0, _pull_down, _always_on, \
+		_supply_regulator)
+
+#define PM8921_VREG_INIT_VS(_id, _always_on, _pull_down, _supply_regulator) \
+	PM8921_VREG_INIT(_id, 0, 0, 0, REGULATOR_CHANGE_STATUS, 0, _pull_down, \
+		_always_on, _supply_regulator)
+
+#define PM8921_VREG_INIT_VS300(_id, _always_on, _pull_down, _supply_regulator) \
+	PM8921_VREG_INIT(_id, 0, 0, 0, REGULATOR_CHANGE_STATUS, 0, _pull_down, \
+		_always_on, _supply_regulator)
+
+#define PM8921_VREG_INIT_NCP(_id, _always_on, _min_uV, _max_uV, \
+		_supply_regulator) \
+	PM8921_VREG_INIT(_id, _min_uV, _max_uV, 0, REGULATOR_CHANGE_VOLTAGE | \
+		REGULATOR_CHANGE_STATUS, 0, 0, _always_on, _supply_regulator)
+
+/* Pin control initialization */
+#define PM8921_PC_INIT(_id, _always_on, _pin_fn, _pin_ctrl, _supply_regulator) \
+	{ \
+		.init_data = { \
+			.constraints = { \
+				.valid_ops_mask	= REGULATOR_CHANGE_STATUS, \
+				.always_on	= _always_on, \
+			}, \
+			.num_consumer_supplies	= \
+				ARRAY_SIZE(pm8921_vreg_consumers_##_id##_PC), \
+			.consumer_supplies = pm8921_vreg_consumers_##_id##_PC, \
+			.supply_regulator  = _supply_regulator, \
+		}, \
+		.id	  = PM8921_VREG_ID_##_id##_PC, \
+		.pin_fn	  = PM8921_VREG_PIN_FN_##_pin_fn, \
+		.pin_ctrl = _pin_ctrl, \
+	}
+
+/* Regulator constraints */
+struct pm8921_regulator_platform_data
+msm_pm8921_regulator_pdata[] __devinitdata = {
+	/*		      ID  always_on pd min_uV   max_uV   supply */
+	PM8921_VREG_INIT_SMPS(S1,	 0, 1, 1225000, 1225000, NULL),
+	PM8921_VREG_INIT_SMPS(S2,	 0, 1, 1300000, 1300000, NULL),
+	PM8921_VREG_INIT_SMPS(S3,	 0, 1, 1050000, 1050000, NULL),
+	PM8921_VREG_INIT_SMPS(S4,	 0, 1, 1800000, 1800000, NULL),
+	PM8921_VREG_INIT_FTSMPS(S5,	 0, 1, 1050000, 1050000, NULL),
+	PM8921_VREG_INIT_FTSMPS(S6,	 0, 1, 1050000, 1050000, NULL),
+	PM8921_VREG_INIT_SMPS(S7,	 0, 1, 1150000, 1150000, NULL),
+	PM8921_VREG_INIT_SMPS(S8,	 0, 1, 2200000, 2200000, NULL),
+
+	PM8921_VREG_INIT_LDO(L1,	 0, 1, 1050000, 1050000, "8921_s4"),
+	PM8921_VREG_INIT_LDO(L2,	 0, 1, 1200000, 1200000, "8921_s4"),
+	PM8921_VREG_INIT_LDO(L3,	 0, 1, 3075000, 3075000, NULL),
+	PM8921_VREG_INIT_LDO(L4,	 0, 1, 1800000, 1800000, NULL),
+	PM8921_VREG_INIT_LDO(L5,	 0, 1, 2950000, 2950000, NULL),
+	PM8921_VREG_INIT_LDO(L6,	 0, 1, 2950000, 2950000, NULL),
+	PM8921_VREG_INIT_LDO(L7,	 0, 1, 2950000, 2950000, NULL),
+	PM8921_VREG_INIT_LDO(L8,	 0, 1, 3000000, 3000000, NULL),
+	PM8921_VREG_INIT_LDO(L9,	 0, 1, 2850000, 2850000, NULL),
+	PM8921_VREG_INIT_LDO(L10,	 0, 1, 2900000, 2900000, NULL),
+	PM8921_VREG_INIT_LDO(L11,	 0, 1, 2850000, 2850000, NULL),
+	PM8921_VREG_INIT_LDO(L12,	 0, 1, 1200000, 1200000, "8921_s4"),
+	PM8921_VREG_INIT_LDO(L14,	 0, 1, 1800000, 1800000, NULL),
+	PM8921_VREG_INIT_LDO(L15,	 0, 1, 1800000, 2950000, NULL),
+	PM8921_VREG_INIT_LDO(L16,	 0, 1, 3000000, 3000000, NULL),
+	PM8921_VREG_INIT_LDO(L17,	 0, 1, 1800000, 2950000, NULL),
+	PM8921_VREG_INIT_LDO(L18,	 0, 1, 1300000, 1300000, "8921_s4"),
+	PM8921_VREG_INIT_LDO(L21,	 0, 1, 1900000, 1900000, "8921_s8"),
+	PM8921_VREG_INIT_LDO(L22,	 0, 1, 2750000, 2750000, NULL),
+	PM8921_VREG_INIT_LDO(L23,	 0, 1, 1800000, 1800000, "8921_s8"),
+	PM8921_VREG_INIT_NLDO1200(L24,	 0, 1, 1050000, 1050000, "8921_s1"),
+	PM8921_VREG_INIT_NLDO1200(L25,	 0, 1, 1225000, 1225000, "8921_s1"),
+	PM8921_VREG_INIT_NLDO1200(L26,	 0, 1, 1050000, 1050000, "8921_s7"),
+	PM8921_VREG_INIT_NLDO1200(L27,	 0, 1, 1050000, 1050000, "8921_s7"),
+	PM8921_VREG_INIT_NLDO1200(L28,	 0, 1, 1050000, 1050000, "8921_s7"),
+	PM8921_VREG_INIT_LDO(L29,	 0, 1, 2050000, 2100000, "8921_s8"),
+
+	PM8921_VREG_INIT_VS(LVS1,	 0, 1,			 "8921_s4"),
+	PM8921_VREG_INIT_VS300(LVS2,	 0, 1,			 "8921_s1"),
+	PM8921_VREG_INIT_VS(LVS3,	 0, 1,			 "8921_s4"),
+	PM8921_VREG_INIT_VS(LVS4,	 0, 1,			 "8921_s4"),
+	PM8921_VREG_INIT_VS(LVS5,	 0, 1,			 "8921_s4"),
+	PM8921_VREG_INIT_VS(LVS6,	 0, 1,			 "8921_s4"),
+	PM8921_VREG_INIT_VS(LVS7,	 0, 1,			 "8921_s4"),
+
+	PM8921_VREG_INIT_VS300(USB_OTG,  0, 1,			 NULL),
+	PM8921_VREG_INIT_VS300(HDMI_MVS, 0, 1,			 NULL),
+
+	PM8921_VREG_INIT_NCP(NCP,	 0,    1800000, 1800000, "8921_l6"),
+};
+
+int msm_pm8921_regulator_pdata_len __devinitdata =
+	ARRAY_SIZE(msm_pm8921_regulator_pdata);
diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c
index 260b338..d505708 100644
--- a/arch/arm/mach-msm/board-msm8960.c
+++ b/arch/arm/mach-msm/board-msm8960.c
@@ -34,6 +34,7 @@
 
 #include "devices.h"
 #include "gpiomux.h"
+#include "board-msm8960.h"
 
 struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {};
 /* Macros assume PMIC GPIOs and MPPs start at 1 */
@@ -102,6 +103,7 @@ static struct pm8921_platform_data pm8921_platform_data __devinitdata = {
 	.irq_pdata		= &pm8xxx_irq_pdata,
 	.gpio_pdata		= &pm8xxx_gpio_pdata,
 	.mpp_pdata		= &pm8xxx_mpp_pdata,
+	.regulator_pdatas	= msm_pm8921_regulator_pdata,
 };
 
 static struct platform_device *devices[] __initdata = {
@@ -122,6 +124,8 @@ static void __init msm8960_init(void)
 	msm8960_device_ssbi_pm8921.dev.platform_data =
 					&msm8960_ssbi_pm8921_pdata;
 
+	pm8921_platform_data.num_regulators = msm_pm8921_regulator_pdata_len;
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-msm/board-msm8960.h b/arch/arm/mach-msm/board-msm8960.h
new file mode 100644
index 0000000..040b033
--- /dev/null
+++ b/arch/arm/mach-msm/board-msm8960.h
@@ -0,0 +1,23 @@
+/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_ARM_MACH_MSM_BOARD_MSM8960_H
+#define __ARCH_ARM_MACH_MSM_BOARD_MSM8960_H
+
+#include <linux/mfd/pm8xxx/pm8921.h>
+
+extern struct pm8921_regulator_platform_data
+	msm_pm8921_regulator_pdata[] __devinitdata;
+
+extern int msm_pm8921_regulator_pdata_len __devinitdata;
+
+#endif
-- 
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.




More information about the linux-arm-kernel mailing list