[PATCH] ARM: imx: fix usb related build failure for mach-vpr200

[Uwe Kleine-König]

This was broken by

	4bd597b (ARM i.MX ehci: do ehci init in board specific functions)

and fixes:

  CC      arch/arm/mach-mx3/mach-vpr200.o
arch/arm/mach-mx3/mach-vpr200.c:263: error: unknown field 'flags' specified in initializer
arch/arm/mach-mx3/mach-vpr200.c:264: warning: initialization makes pointer from integer without a cast

by just applying the change to mach-vpr200.c that the other machine files
got by 4bd597b.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
Hello,

this is based on a tree that have mach-mx3 moved to mach-imx, so this patch
might not apply to your tree. Then you need to patch arch/arm/mach-mx3/mach-vpr200.c.

Thanks
Uwe

 arch/arm/mach-imx/mach-vpr200.c |   11 ++++++++---
 1 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index 84100c6..d74e347 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -246,11 +246,16 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
 };
 
+static int vpr200_usbh_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id,
+			MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY);
+}
+
 /* USB HOST config */
 static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
-	.portsc		= MXC_EHCI_MODE_SERIAL,
-	.flags		= MXC_EHCI_INTERFACE_SINGLE_UNI |
-			  MXC_EHCI_INTERNAL_PHY,
+	.init = vpr200_usbh_init,
+	.portsc = MXC_EHCI_MODE_SERIAL,
 };
 
 static struct platform_device *devices[] __initdata = {
-- 
1.7.2.3