[PATCH 4/5] arm: mach-stmp378x: remove mach
Wolfram Sang
w.sang at pengutronix.de
Fri Apr 29 09:06:42 EDT 2011
This mach has not seen any updates since the initial inclusion besides
generic cleanup. Furthermore:
- The i.MX23 covered in mach-mxs is just a renamed version of the
STMP378x.
- mach-stmp378x has a lot of reinvented interfaces, leaking all sorts of
mach-related includes into the drivers. One example is the dmaengine
which does not use the linux dmaengine-API but some privately exported
symbols. So drivers cannot be reused. mach-mxs does it better.
- There is only one board defined (which I couldn't find any trace of
despite being a development board). It has been converted to
mach-mxs in a previous patch.
Since the only user of this mach was converted, it means that
mach-stmp378x can go.
Signed-off-by: Wolfram Sang <w.sang at pengutronix.de>
Acked-by: Shawn Guo <shawn.guo at freescale.com>
---
arch/arm/Makefile | 1 -
arch/arm/configs/stmp378x_defconfig | 128 --------
arch/arm/mach-stmp378x/Makefile | 2 -
arch/arm/mach-stmp378x/Makefile.boot | 3 -
arch/arm/mach-stmp378x/include/mach/entry-macro.S | 35 --
arch/arm/mach-stmp378x/include/mach/irqs.h | 95 ------
arch/arm/mach-stmp378x/include/mach/pins.h | 151 ---------
arch/arm/mach-stmp378x/include/mach/regs-apbh.h | 101 ------
arch/arm/mach-stmp378x/include/mach/regs-apbx.h | 119 -------
arch/arm/mach-stmp378x/include/mach/regs-audioin.h | 63 ----
.../arm/mach-stmp378x/include/mach/regs-audioout.h | 104 ------
arch/arm/mach-stmp378x/include/mach/regs-bch.h | 56 ----
arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h | 88 -----
arch/arm/mach-stmp378x/include/mach/regs-dcp.h | 87 -----
arch/arm/mach-stmp378x/include/mach/regs-digctl.h | 38 ---
arch/arm/mach-stmp378x/include/mach/regs-dram.h | 27 --
arch/arm/mach-stmp378x/include/mach/regs-dri.h | 45 ---
arch/arm/mach-stmp378x/include/mach/regs-ecc8.h | 39 ---
arch/arm/mach-stmp378x/include/mach/regs-emi.h | 25 --
arch/arm/mach-stmp378x/include/mach/regs-gpmi.h | 78 -----
arch/arm/mach-stmp378x/include/mach/regs-i2c.h | 55 ----
arch/arm/mach-stmp378x/include/mach/regs-icoll.h | 45 ---
arch/arm/mach-stmp378x/include/mach/regs-ir.h | 23 --
arch/arm/mach-stmp378x/include/mach/regs-lcdif.h | 195 ------------
arch/arm/mach-stmp378x/include/mach/regs-lradc.h | 99 ------
arch/arm/mach-stmp378x/include/mach/regs-ocotp.h | 40 ---
arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h | 90 ------
arch/arm/mach-stmp378x/include/mach/regs-power.h | 63 ----
arch/arm/mach-stmp378x/include/mach/regs-pwm.h | 53 ---
arch/arm/mach-stmp378x/include/mach/regs-pxp.h | 140 --------
arch/arm/mach-stmp378x/include/mach/regs-rtc.h | 59 ----
arch/arm/mach-stmp378x/include/mach/regs-saif.h | 21 --
arch/arm/mach-stmp378x/include/mach/regs-spdif.h | 49 ---
arch/arm/mach-stmp378x/include/mach/regs-ssp.h | 102 ------
arch/arm/mach-stmp378x/include/mach/regs-sydma.h | 23 --
arch/arm/mach-stmp378x/include/mach/regs-timrot.h | 68 ----
arch/arm/mach-stmp378x/include/mach/regs-tvenc.h | 67 ----
arch/arm/mach-stmp378x/include/mach/regs-uartapp.h | 87 -----
arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h | 268 ----------------
arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h | 40 ---
arch/arm/mach-stmp378x/include/mach/regs-usbphy.h | 37 ---
arch/arm/mach-stmp378x/stmp378x.c | 299 ------------------
arch/arm/mach-stmp378x/stmp378x.h | 25 --
arch/arm/mach-stmp378x/stmp378x_devb.c | 332 --------------------
arch/arm/plat-stmp3xxx/Kconfig | 20 --
45 files changed, 0 insertions(+), 3585 deletions(-)
delete mode 100644 arch/arm/configs/stmp378x_defconfig
delete mode 100644 arch/arm/mach-stmp378x/Makefile
delete mode 100644 arch/arm/mach-stmp378x/Makefile.boot
delete mode 100644 arch/arm/mach-stmp378x/include/mach/entry-macro.S
delete mode 100644 arch/arm/mach-stmp378x/include/mach/irqs.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/pins.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-apbh.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-apbx.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-audioin.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-audioout.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-bch.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-dcp.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-digctl.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-dram.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-dri.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-ecc8.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-emi.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-gpmi.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-i2c.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-icoll.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-ir.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-lcdif.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-lradc.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-ocotp.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-power.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-pwm.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-pxp.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-rtc.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-saif.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-spdif.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-ssp.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-sydma.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-timrot.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-tvenc.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-uartapp.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h
delete mode 100644 arch/arm/mach-stmp378x/include/mach/regs-usbphy.h
delete mode 100644 arch/arm/mach-stmp378x/stmp378x.c
delete mode 100644 arch/arm/mach-stmp378x/stmp378x.h
delete mode 100644 arch/arm/mach-stmp378x/stmp378x_devb.c
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 23ecbda..ca473b1 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -185,7 +185,6 @@ machine-$(CONFIG_ARCH_EXYNOS4) := exynos4
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
-machine-$(CONFIG_ARCH_STMP378X) := stmp378x
machine-$(CONFIG_ARCH_TCC8K) := tcc8k
machine-$(CONFIG_ARCH_TEGRA) := tegra
machine-$(CONFIG_ARCH_U300) := u300
diff --git a/arch/arm/configs/stmp378x_defconfig b/arch/arm/configs/stmp378x_defconfig
deleted file mode 100644
index 1079c2b..0000000
--- a/arch/arm/configs/stmp378x_defconfig
+++ /dev/null
@@ -1,128 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-default"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_STMP3XXX=y
-CONFIG_ARCH_STMP378X=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_NET_SCHED=y
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=6144
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_INPUT_POLLDEV=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=m
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_OBJECTS=y
-CONFIG_DEBUG_OBJECTS_SELFTEST=y
-CONFIG_DEBUG_OBJECTS_FREE=y
-CONFIG_DEBUG_OBJECTS_TIMERS=y
-CONFIG_DEBUG_SLAB=y
-CONFIG_DEBUG_SLAB_LEAK=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_KOBJECT=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_BOOT_TRACER=y
-CONFIG_STACK_TRACER=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
diff --git a/arch/arm/mach-stmp378x/Makefile b/arch/arm/mach-stmp378x/Makefile
deleted file mode 100644
index d156f76..0000000
--- a/arch/arm/mach-stmp378x/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-obj-$(CONFIG_ARCH_STMP378X) += stmp378x.o
-obj-$(CONFIG_MACH_STMP378X) += stmp378x_devb.o
diff --git a/arch/arm/mach-stmp378x/Makefile.boot b/arch/arm/mach-stmp378x/Makefile.boot
deleted file mode 100644
index 1568ad4..0000000
--- a/arch/arm/mach-stmp378x/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
- zreladdr-y := 0x40008000
-params_phys-y := 0x40000100
-initrd_phys-y := 0x40800000
diff --git a/arch/arm/mach-stmp378x/include/mach/entry-macro.S b/arch/arm/mach-stmp378x/include/mach/entry-macro.S
deleted file mode 100644
index 731a922..0000000
--- a/arch/arm/mach-stmp378x/include/mach/entry-macro.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Low-level IRQ helper macros for Freescale STMP378X
- *
- * Embedded Alley Solutions, Inc <source at embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- mov \base, #0xf0000000 @ vm address of IRQ controller
- ldr \irqnr, [\base, #0x70] @ HW_ICOLL_STAT
- cmp \irqnr, #0x7f
- moveqs \irqnr, #0 @ Zero flag set for no IRQ
-
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-stmp378x/include/mach/irqs.h b/arch/arm/mach-stmp378x/include/mach/irqs.h
deleted file mode 100644
index cc59673..0000000
--- a/arch/arm/mach-stmp378x/include/mach/irqs.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Freescale STMP378X interrupts
- *
- * Copyright (C) 2005 Sigmatel Inc
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#define IRQ_DEBUG_UART 0
-#define IRQ_COMMS_RX 1
-#define IRQ_COMMS_TX 1
-#define IRQ_SSP2_ERROR 2
-#define IRQ_VDD5V 3
-#define IRQ_HEADPHONE_SHORT 4
-#define IRQ_DAC_DMA 5
-#define IRQ_DAC_ERROR 6
-#define IRQ_ADC_DMA 7
-#define IRQ_ADC_ERROR 8
-#define IRQ_SPDIF_DMA 9
-#define IRQ_SAIF2_DMA 9
-#define IRQ_SPDIF_ERROR 10
-#define IRQ_SAIF1_IRQ 10
-#define IRQ_SAIF2_IRQ 10
-#define IRQ_USB_CTRL 11
-#define IRQ_USB_WAKEUP 12
-#define IRQ_GPMI_DMA 13
-#define IRQ_SSP1_DMA 14
-#define IRQ_SSP_ERROR 15
-#define IRQ_GPIO0 16
-#define IRQ_GPIO1 17
-#define IRQ_GPIO2 18
-#define IRQ_SAIF1_DMA 19
-#define IRQ_SSP2_DMA 20
-#define IRQ_ECC8_IRQ 21
-#define IRQ_RTC_ALARM 22
-#define IRQ_UARTAPP_TX_DMA 23
-#define IRQ_UARTAPP_INTERNAL 24
-#define IRQ_UARTAPP_RX_DMA 25
-#define IRQ_I2C_DMA 26
-#define IRQ_I2C_ERROR 27
-#define IRQ_TIMER0 28
-#define IRQ_TIMER1 29
-#define IRQ_TIMER2 30
-#define IRQ_TIMER3 31
-#define IRQ_BATT_BRNOUT 32
-#define IRQ_VDDD_BRNOUT 33
-#define IRQ_VDDIO_BRNOUT 34
-#define IRQ_VDD18_BRNOUT 35
-#define IRQ_TOUCH_DETECT 36
-#define IRQ_LRADC_CH0 37
-#define IRQ_LRADC_CH1 38
-#define IRQ_LRADC_CH2 39
-#define IRQ_LRADC_CH3 40
-#define IRQ_LRADC_CH4 41
-#define IRQ_LRADC_CH5 42
-#define IRQ_LRADC_CH6 43
-#define IRQ_LRADC_CH7 44
-#define IRQ_LCDIF_DMA 45
-#define IRQ_LCDIF_ERROR 46
-#define IRQ_DIGCTL_DEBUG_TRAP 47
-#define IRQ_RTC_1MSEC 48
-#define IRQ_DRI_DMA 49
-#define IRQ_DRI_ATTENTION 50
-#define IRQ_GPMI_ATTENTION 51
-#define IRQ_IR 52
-#define IRQ_DCP_VMI 53
-#define IRQ_DCP 54
-#define IRQ_BCH 56
-#define IRQ_PXP 57
-#define IRQ_UARTAPP2_TX_DMA 58
-#define IRQ_UARTAPP2_INTERNAL 59
-#define IRQ_UARTAPP2_RX_DMA 60
-#define IRQ_VDAC_DETECT 61
-#define IRQ_VDD5V_DROOP 64
-#define IRQ_DCDC4P2_BO 65
-
-
-#define NR_REAL_IRQS 128
-#define NR_IRQS (NR_REAL_IRQS + 32 * 3)
-
-/* All interrupts are FIQ capable */
-#define FIQ_START IRQ_DEBUG_UART
-
-/* Hard disk IRQ is a GPMI attention IRQ */
-#define IRQ_HARDDISK IRQ_GPMI_ATTENTION
diff --git a/arch/arm/mach-stmp378x/include/mach/pins.h b/arch/arm/mach-stmp378x/include/mach/pins.h
deleted file mode 100644
index 93f952d..0000000
--- a/arch/arm/mach-stmp378x/include/mach/pins.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Freescale STMP378X SoC pin multiplexing
- *
- * Author: Vladislav Buzov <vbuzov at embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_ARCH_PINS_H
-#define __ASM_ARCH_PINS_H
-
-/*
- * Define all STMP378x pins, a pin name corresponds to a STMP378x hardware
- * interface this pin belongs to.
- */
-
-/* Bank 0 */
-#define PINID_GPMI_D00 STMP3XXX_PINID(0, 0)
-#define PINID_GPMI_D01 STMP3XXX_PINID(0, 1)
-#define PINID_GPMI_D02 STMP3XXX_PINID(0, 2)
-#define PINID_GPMI_D03 STMP3XXX_PINID(0, 3)
-#define PINID_GPMI_D04 STMP3XXX_PINID(0, 4)
-#define PINID_GPMI_D05 STMP3XXX_PINID(0, 5)
-#define PINID_GPMI_D06 STMP3XXX_PINID(0, 6)
-#define PINID_GPMI_D07 STMP3XXX_PINID(0, 7)
-#define PINID_GPMI_D08 STMP3XXX_PINID(0, 8)
-#define PINID_GPMI_D09 STMP3XXX_PINID(0, 9)
-#define PINID_GPMI_D10 STMP3XXX_PINID(0, 10)
-#define PINID_GPMI_D11 STMP3XXX_PINID(0, 11)
-#define PINID_GPMI_D12 STMP3XXX_PINID(0, 12)
-#define PINID_GPMI_D13 STMP3XXX_PINID(0, 13)
-#define PINID_GPMI_D14 STMP3XXX_PINID(0, 14)
-#define PINID_GPMI_D15 STMP3XXX_PINID(0, 15)
-#define PINID_GPMI_CLE STMP3XXX_PINID(0, 16)
-#define PINID_GPMI_ALE STMP3XXX_PINID(0, 17)
-#define PINID_GMPI_CE2N STMP3XXX_PINID(0, 18)
-#define PINID_GPMI_RDY0 STMP3XXX_PINID(0, 19)
-#define PINID_GPMI_RDY1 STMP3XXX_PINID(0, 20)
-#define PINID_GPMI_RDY2 STMP3XXX_PINID(0, 21)
-#define PINID_GPMI_RDY3 STMP3XXX_PINID(0, 22)
-#define PINID_GPMI_WPN STMP3XXX_PINID(0, 23)
-#define PINID_GPMI_WRN STMP3XXX_PINID(0, 24)
-#define PINID_GPMI_RDN STMP3XXX_PINID(0, 25)
-#define PINID_AUART1_CTS STMP3XXX_PINID(0, 26)
-#define PINID_AUART1_RTS STMP3XXX_PINID(0, 27)
-#define PINID_AUART1_RX STMP3XXX_PINID(0, 28)
-#define PINID_AUART1_TX STMP3XXX_PINID(0, 29)
-#define PINID_I2C_SCL STMP3XXX_PINID(0, 30)
-#define PINID_I2C_SDA STMP3XXX_PINID(0, 31)
-
-/* Bank 1 */
-#define PINID_LCD_D00 STMP3XXX_PINID(1, 0)
-#define PINID_LCD_D01 STMP3XXX_PINID(1, 1)
-#define PINID_LCD_D02 STMP3XXX_PINID(1, 2)
-#define PINID_LCD_D03 STMP3XXX_PINID(1, 3)
-#define PINID_LCD_D04 STMP3XXX_PINID(1, 4)
-#define PINID_LCD_D05 STMP3XXX_PINID(1, 5)
-#define PINID_LCD_D06 STMP3XXX_PINID(1, 6)
-#define PINID_LCD_D07 STMP3XXX_PINID(1, 7)
-#define PINID_LCD_D08 STMP3XXX_PINID(1, 8)
-#define PINID_LCD_D09 STMP3XXX_PINID(1, 9)
-#define PINID_LCD_D10 STMP3XXX_PINID(1, 10)
-#define PINID_LCD_D11 STMP3XXX_PINID(1, 11)
-#define PINID_LCD_D12 STMP3XXX_PINID(1, 12)
-#define PINID_LCD_D13 STMP3XXX_PINID(1, 13)
-#define PINID_LCD_D14 STMP3XXX_PINID(1, 14)
-#define PINID_LCD_D15 STMP3XXX_PINID(1, 15)
-#define PINID_LCD_D16 STMP3XXX_PINID(1, 16)
-#define PINID_LCD_D17 STMP3XXX_PINID(1, 17)
-#define PINID_LCD_RESET STMP3XXX_PINID(1, 18)
-#define PINID_LCD_RS STMP3XXX_PINID(1, 19)
-#define PINID_LCD_WR STMP3XXX_PINID(1, 20)
-#define PINID_LCD_CS STMP3XXX_PINID(1, 21)
-#define PINID_LCD_DOTCK STMP3XXX_PINID(1, 22)
-#define PINID_LCD_ENABLE STMP3XXX_PINID(1, 23)
-#define PINID_LCD_HSYNC STMP3XXX_PINID(1, 24)
-#define PINID_LCD_VSYNC STMP3XXX_PINID(1, 25)
-#define PINID_PWM0 STMP3XXX_PINID(1, 26)
-#define PINID_PWM1 STMP3XXX_PINID(1, 27)
-#define PINID_PWM2 STMP3XXX_PINID(1, 28)
-#define PINID_PWM3 STMP3XXX_PINID(1, 29)
-#define PINID_PWM4 STMP3XXX_PINID(1, 30)
-
-/* Bank 2 */
-#define PINID_SSP1_CMD STMP3XXX_PINID(2, 0)
-#define PINID_SSP1_DETECT STMP3XXX_PINID(2, 1)
-#define PINID_SSP1_DATA0 STMP3XXX_PINID(2, 2)
-#define PINID_SSP1_DATA1 STMP3XXX_PINID(2, 3)
-#define PINID_SSP1_DATA2 STMP3XXX_PINID(2, 4)
-#define PINID_SSP1_DATA3 STMP3XXX_PINID(2, 5)
-#define PINID_SSP1_SCK STMP3XXX_PINID(2, 6)
-#define PINID_ROTARYA STMP3XXX_PINID(2, 7)
-#define PINID_ROTARYB STMP3XXX_PINID(2, 8)
-#define PINID_EMI_A00 STMP3XXX_PINID(2, 9)
-#define PINID_EMI_A01 STMP3XXX_PINID(2, 10)
-#define PINID_EMI_A02 STMP3XXX_PINID(2, 11)
-#define PINID_EMI_A03 STMP3XXX_PINID(2, 12)
-#define PINID_EMI_A04 STMP3XXX_PINID(2, 13)
-#define PINID_EMI_A05 STMP3XXX_PINID(2, 14)
-#define PINID_EMI_A06 STMP3XXX_PINID(2, 15)
-#define PINID_EMI_A07 STMP3XXX_PINID(2, 16)
-#define PINID_EMI_A08 STMP3XXX_PINID(2, 17)
-#define PINID_EMI_A09 STMP3XXX_PINID(2, 18)
-#define PINID_EMI_A10 STMP3XXX_PINID(2, 19)
-#define PINID_EMI_A11 STMP3XXX_PINID(2, 20)
-#define PINID_EMI_A12 STMP3XXX_PINID(2, 21)
-#define PINID_EMI_BA0 STMP3XXX_PINID(2, 22)
-#define PINID_EMI_BA1 STMP3XXX_PINID(2, 23)
-#define PINID_EMI_CASN STMP3XXX_PINID(2, 24)
-#define PINID_EMI_CE0N STMP3XXX_PINID(2, 25)
-#define PINID_EMI_CE1N STMP3XXX_PINID(2, 26)
-#define PINID_GPMI_CE1N STMP3XXX_PINID(2, 27)
-#define PINID_GPMI_CE0N STMP3XXX_PINID(2, 28)
-#define PINID_EMI_CKE STMP3XXX_PINID(2, 29)
-#define PINID_EMI_RASN STMP3XXX_PINID(2, 30)
-#define PINID_EMI_WEN STMP3XXX_PINID(2, 31)
-
-/* Bank 3 */
-#define PINID_EMI_D00 STMP3XXX_PINID(3, 0)
-#define PINID_EMI_D01 STMP3XXX_PINID(3, 1)
-#define PINID_EMI_D02 STMP3XXX_PINID(3, 2)
-#define PINID_EMI_D03 STMP3XXX_PINID(3, 3)
-#define PINID_EMI_D04 STMP3XXX_PINID(3, 4)
-#define PINID_EMI_D05 STMP3XXX_PINID(3, 5)
-#define PINID_EMI_D06 STMP3XXX_PINID(3, 6)
-#define PINID_EMI_D07 STMP3XXX_PINID(3, 7)
-#define PINID_EMI_D08 STMP3XXX_PINID(3, 8)
-#define PINID_EMI_D09 STMP3XXX_PINID(3, 9)
-#define PINID_EMI_D10 STMP3XXX_PINID(3, 10)
-#define PINID_EMI_D11 STMP3XXX_PINID(3, 11)
-#define PINID_EMI_D12 STMP3XXX_PINID(3, 12)
-#define PINID_EMI_D13 STMP3XXX_PINID(3, 13)
-#define PINID_EMI_D14 STMP3XXX_PINID(3, 14)
-#define PINID_EMI_D15 STMP3XXX_PINID(3, 15)
-#define PINID_EMI_DQM0 STMP3XXX_PINID(3, 16)
-#define PINID_EMI_DQM1 STMP3XXX_PINID(3, 17)
-#define PINID_EMI_DQS0 STMP3XXX_PINID(3, 18)
-#define PINID_EMI_DQS1 STMP3XXX_PINID(3, 19)
-#define PINID_EMI_CLK STMP3XXX_PINID(3, 20)
-#define PINID_EMI_CLKN STMP3XXX_PINID(3, 21)
-
-#endif /* __ASM_ARCH_PINS_H */
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-apbh.h b/arch/arm/mach-stmp378x/include/mach/regs-apbh.h
deleted file mode 100644
index dbcf85b..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-apbh.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * stmp378x: APBH register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_APBH
-#define _MACH_REGS_APBH
-
-#define REGS_APBH_BASE (STMP3XXX_REGS_BASE + 0x4000)
-#define REGS_APBH_PHYS 0x80004000
-#define REGS_APBH_SIZE 0x2000
-
-#define HW_APBH_CTRL0 0x0
-#define BM_APBH_CTRL0_RESET_CHANNEL 0x00FF0000
-#define BP_APBH_CTRL0_RESET_CHANNEL 16
-#define BM_APBH_CTRL0_CLKGATE 0x40000000
-#define BM_APBH_CTRL0_SFTRST 0x80000000
-
-#define HW_APBH_CTRL1 0x10
-#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0x00000001
-#define BP_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0
-
-#define HW_APBH_CTRL2 0x20
-
-#define HW_APBH_DEVSEL 0x30
-
-#define HW_APBH_CH0_NXTCMDAR (0x50 + 0 * 0x70)
-#define HW_APBH_CH1_NXTCMDAR (0x50 + 1 * 0x70)
-#define HW_APBH_CH2_NXTCMDAR (0x50 + 2 * 0x70)
-#define HW_APBH_CH3_NXTCMDAR (0x50 + 3 * 0x70)
-#define HW_APBH_CH4_NXTCMDAR (0x50 + 4 * 0x70)
-#define HW_APBH_CH5_NXTCMDAR (0x50 + 5 * 0x70)
-#define HW_APBH_CH6_NXTCMDAR (0x50 + 6 * 0x70)
-#define HW_APBH_CH7_NXTCMDAR (0x50 + 7 * 0x70)
-#define HW_APBH_CH8_NXTCMDAR (0x50 + 8 * 0x70)
-#define HW_APBH_CH9_NXTCMDAR (0x50 + 9 * 0x70)
-#define HW_APBH_CH10_NXTCMDAR (0x50 + 10 * 0x70)
-#define HW_APBH_CH11_NXTCMDAR (0x50 + 11 * 0x70)
-#define HW_APBH_CH12_NXTCMDAR (0x50 + 12 * 0x70)
-#define HW_APBH_CH13_NXTCMDAR (0x50 + 13 * 0x70)
-#define HW_APBH_CH14_NXTCMDAR (0x50 + 14 * 0x70)
-#define HW_APBH_CH15_NXTCMDAR (0x50 + 15 * 0x70)
-
-#define HW_APBH_CHn_NXTCMDAR 0x50
-
-#define BV_APBH_CHn_CMD_COMMAND__NO_DMA_XFER 0
-#define BV_APBH_CHn_CMD_COMMAND__DMA_WRITE 1
-#define BV_APBH_CHn_CMD_COMMAND__DMA_READ 2
-#define BV_APBH_CHn_CMD_COMMAND__DMA_SENSE 3
-#define BM_APBH_CHn_CMD_COMMAND 0x00000003
-#define BP_APBH_CHn_CMD_COMMAND 0
-#define BM_APBH_CHn_CMD_CHAIN 0x00000004
-#define BM_APBH_CHn_CMD_IRQONCMPLT 0x00000008
-#define BM_APBH_CHn_CMD_NANDLOCK 0x00000010
-#define BM_APBH_CHn_CMD_NANDWAIT4READY 0x00000020
-#define BM_APBH_CHn_CMD_SEMAPHORE 0x00000040
-#define BM_APBH_CHn_CMD_WAIT4ENDCMD 0x00000080
-#define BM_APBH_CHn_CMD_CMDWORDS 0x0000F000
-#define BP_APBH_CHn_CMD_CMDWORDS 12
-#define BM_APBH_CHn_CMD_XFER_COUNT 0xFFFF0000
-#define BP_APBH_CHn_CMD_XFER_COUNT 16
-
-#define HW_APBH_CH0_SEMA (0x80 + 0 * 0x70)
-#define HW_APBH_CH1_SEMA (0x80 + 1 * 0x70)
-#define HW_APBH_CH2_SEMA (0x80 + 2 * 0x70)
-#define HW_APBH_CH3_SEMA (0x80 + 3 * 0x70)
-#define HW_APBH_CH4_SEMA (0x80 + 4 * 0x70)
-#define HW_APBH_CH5_SEMA (0x80 + 5 * 0x70)
-#define HW_APBH_CH6_SEMA (0x80 + 6 * 0x70)
-#define HW_APBH_CH7_SEMA (0x80 + 7 * 0x70)
-#define HW_APBH_CH8_SEMA (0x80 + 8 * 0x70)
-#define HW_APBH_CH9_SEMA (0x80 + 9 * 0x70)
-#define HW_APBH_CH10_SEMA (0x80 + 10 * 0x70)
-#define HW_APBH_CH11_SEMA (0x80 + 11 * 0x70)
-#define HW_APBH_CH12_SEMA (0x80 + 12 * 0x70)
-#define HW_APBH_CH13_SEMA (0x80 + 13 * 0x70)
-#define HW_APBH_CH14_SEMA (0x80 + 14 * 0x70)
-#define HW_APBH_CH15_SEMA (0x80 + 15 * 0x70)
-
-#define HW_APBH_CHn_SEMA 0x80
-#define BM_APBH_CHn_SEMA_INCREMENT_SEMA 0x000000FF
-#define BP_APBH_CHn_SEMA_INCREMENT_SEMA 0
-#define BM_APBH_CHn_SEMA_PHORE 0x00FF0000
-#define BP_APBH_CHn_SEMA_PHORE 16
-
-#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-apbx.h b/arch/arm/mach-stmp378x/include/mach/regs-apbx.h
deleted file mode 100644
index 3b934a4..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-apbx.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * stmp378x: APBX register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_APBX
-#define _MACH_REGS_APBX
-
-#define REGS_APBX_BASE (STMP3XXX_REGS_BASE + 0x24000)
-#define REGS_APBX_PHYS 0x80024000
-#define REGS_APBX_SIZE 0x2000
-
-#define HW_APBX_CTRL0 0x0
-#define BM_APBX_CTRL0_CLKGATE 0x40000000
-#define BM_APBX_CTRL0_SFTRST 0x80000000
-
-#define HW_APBX_CTRL1 0x10
-
-#define HW_APBX_CTRL2 0x20
-
-#define HW_APBX_CHANNEL_CTRL 0x30
-#define BM_APBX_CHANNEL_CTRL_RESET_CHANNEL 0xFFFF0000
-#define BP_APBX_CHANNEL_CTRL_RESET_CHANNEL 16
-
-#define HW_APBX_DEVSEL 0x40
-
-#define HW_APBX_CH0_NXTCMDAR (0x110 + 0 * 0x70)
-#define HW_APBX_CH1_NXTCMDAR (0x110 + 1 * 0x70)
-#define HW_APBX_CH2_NXTCMDAR (0x110 + 2 * 0x70)
-#define HW_APBX_CH3_NXTCMDAR (0x110 + 3 * 0x70)
-#define HW_APBX_CH4_NXTCMDAR (0x110 + 4 * 0x70)
-#define HW_APBX_CH5_NXTCMDAR (0x110 + 5 * 0x70)
-#define HW_APBX_CH6_NXTCMDAR (0x110 + 6 * 0x70)
-#define HW_APBX_CH7_NXTCMDAR (0x110 + 7 * 0x70)
-#define HW_APBX_CH8_NXTCMDAR (0x110 + 8 * 0x70)
-#define HW_APBX_CH9_NXTCMDAR (0x110 + 9 * 0x70)
-#define HW_APBX_CH10_NXTCMDAR (0x110 + 10 * 0x70)
-#define HW_APBX_CH11_NXTCMDAR (0x110 + 11 * 0x70)
-#define HW_APBX_CH12_NXTCMDAR (0x110 + 12 * 0x70)
-#define HW_APBX_CH13_NXTCMDAR (0x110 + 13 * 0x70)
-#define HW_APBX_CH14_NXTCMDAR (0x110 + 14 * 0x70)
-#define HW_APBX_CH15_NXTCMDAR (0x110 + 15 * 0x70)
-
-#define HW_APBX_CHn_NXTCMDAR 0x110
-#define BM_APBX_CHn_CMD_COMMAND 0x00000003
-#define BP_APBX_CHn_CMD_COMMAND 0
-#define BV_APBX_CHn_CMD_COMMAND__NO_DMA_XFER 0
-#define BV_APBX_CHn_CMD_COMMAND__DMA_WRITE 1
-#define BV_APBX_CHn_CMD_COMMAND__DMA_READ 2
-#define BV_APBX_CHn_CMD_COMMAND__DMA_SENSE 3
-#define BM_APBX_CHn_CMD_CHAIN 0x00000004
-#define BM_APBX_CHn_CMD_IRQONCMPLT 0x00000008
-#define BM_APBX_CHn_CMD_SEMAPHORE 0x00000040
-#define BM_APBX_CHn_CMD_WAIT4ENDCMD 0x00000080
-#define BM_APBX_CHn_CMD_HALTONTERMINATE 0x00000100
-#define BM_APBX_CHn_CMD_CMDWORDS 0x0000F000
-#define BP_APBX_CHn_CMD_CMDWORDS 12
-#define BM_APBX_CHn_CMD_XFER_COUNT 0xFFFF0000
-#define BP_APBX_CHn_CMD_XFER_COUNT 16
-
-#define HW_APBX_CH0_BAR (0x130 + 0 * 0x70)
-#define HW_APBX_CH1_BAR (0x130 + 1 * 0x70)
-#define HW_APBX_CH2_BAR (0x130 + 2 * 0x70)
-#define HW_APBX_CH3_BAR (0x130 + 3 * 0x70)
-#define HW_APBX_CH4_BAR (0x130 + 4 * 0x70)
-#define HW_APBX_CH5_BAR (0x130 + 5 * 0x70)
-#define HW_APBX_CH6_BAR (0x130 + 6 * 0x70)
-#define HW_APBX_CH7_BAR (0x130 + 7 * 0x70)
-#define HW_APBX_CH8_BAR (0x130 + 8 * 0x70)
-#define HW_APBX_CH9_BAR (0x130 + 9 * 0x70)
-#define HW_APBX_CH10_BAR (0x130 + 10 * 0x70)
-#define HW_APBX_CH11_BAR (0x130 + 11 * 0x70)
-#define HW_APBX_CH12_BAR (0x130 + 12 * 0x70)
-#define HW_APBX_CH13_BAR (0x130 + 13 * 0x70)
-#define HW_APBX_CH14_BAR (0x130 + 14 * 0x70)
-#define HW_APBX_CH15_BAR (0x130 + 15 * 0x70)
-
-#define HW_APBX_CHn_BAR 0x130
-
-#define HW_APBX_CH0_SEMA (0x140 + 0 * 0x70)
-#define HW_APBX_CH1_SEMA (0x140 + 1 * 0x70)
-#define HW_APBX_CH2_SEMA (0x140 + 2 * 0x70)
-#define HW_APBX_CH3_SEMA (0x140 + 3 * 0x70)
-#define HW_APBX_CH4_SEMA (0x140 + 4 * 0x70)
-#define HW_APBX_CH5_SEMA (0x140 + 5 * 0x70)
-#define HW_APBX_CH6_SEMA (0x140 + 6 * 0x70)
-#define HW_APBX_CH7_SEMA (0x140 + 7 * 0x70)
-#define HW_APBX_CH8_SEMA (0x140 + 8 * 0x70)
-#define HW_APBX_CH9_SEMA (0x140 + 9 * 0x70)
-#define HW_APBX_CH10_SEMA (0x140 + 10 * 0x70)
-#define HW_APBX_CH11_SEMA (0x140 + 11 * 0x70)
-#define HW_APBX_CH12_SEMA (0x140 + 12 * 0x70)
-#define HW_APBX_CH13_SEMA (0x140 + 13 * 0x70)
-#define HW_APBX_CH14_SEMA (0x140 + 14 * 0x70)
-#define HW_APBX_CH15_SEMA (0x140 + 15 * 0x70)
-
-#define HW_APBX_CHn_SEMA 0x140
-#define BM_APBX_CHn_SEMA_INCREMENT_SEMA 0x000000FF
-#define BP_APBX_CHn_SEMA_INCREMENT_SEMA 0
-#define BM_APBX_CHn_SEMA_PHORE 0x00FF0000
-#define BP_APBX_CHn_SEMA_PHORE 16
-
-#endif
-
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-audioin.h b/arch/arm/mach-stmp378x/include/mach/regs-audioin.h
deleted file mode 100644
index 641ac61..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-audioin.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * stmp378x: AUDIOIN register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_AUDIOIN_BASE (STMP3XXX_REGS_BASE + 0x4C000)
-#define REGS_AUDIOIN_PHYS 0x8004C000
-#define REGS_AUDIOIN_SIZE 0x2000
-
-#define HW_AUDIOIN_CTRL 0x0
-#define BM_AUDIOIN_CTRL_RUN 0x00000001
-#define BP_AUDIOIN_CTRL_RUN 0
-#define BM_AUDIOIN_CTRL_FIFO_ERROR_IRQ_EN 0x00000002
-#define BM_AUDIOIN_CTRL_FIFO_OVERFLOW_IRQ 0x00000004
-#define BM_AUDIOIN_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008
-#define BM_AUDIOIN_CTRL_WORD_LENGTH 0x00000020
-#define BM_AUDIOIN_CTRL_CLKGATE 0x40000000
-#define BM_AUDIOIN_CTRL_SFTRST 0x80000000
-
-#define HW_AUDIOIN_STAT 0x10
-
-#define HW_AUDIOIN_ADCSRR 0x20
-
-#define HW_AUDIOIN_ADCVOLUME 0x30
-#define BM_AUDIOIN_ADCVOLUME_VOLUME_RIGHT 0x000000FF
-#define BP_AUDIOIN_ADCVOLUME_VOLUME_RIGHT 0
-#define BM_AUDIOIN_ADCVOLUME_VOLUME_LEFT 0x00FF0000
-#define BP_AUDIOIN_ADCVOLUME_VOLUME_LEFT 16
-
-#define HW_AUDIOIN_ADCDEBUG 0x40
-
-#define HW_AUDIOIN_ADCVOL 0x50
-#define BM_AUDIOIN_ADCVOL_GAIN_RIGHT 0x0000000F
-#define BP_AUDIOIN_ADCVOL_GAIN_RIGHT 0
-#define BM_AUDIOIN_ADCVOL_SELECT_RIGHT 0x00000030
-#define BP_AUDIOIN_ADCVOL_SELECT_RIGHT 4
-#define BM_AUDIOIN_ADCVOL_GAIN_LEFT 0x00000F00
-#define BP_AUDIOIN_ADCVOL_GAIN_LEFT 8
-#define BM_AUDIOIN_ADCVOL_SELECT_LEFT 0x00003000
-#define BP_AUDIOIN_ADCVOL_SELECT_LEFT 12
-#define BM_AUDIOIN_ADCVOL_MUTE 0x01000000
-
-#define HW_AUDIOIN_MICLINE 0x60
-
-#define HW_AUDIOIN_ANACLKCTRL 0x70
-#define BM_AUDIOIN_ANACLKCTRL_CLKGATE 0x80000000
-
-#define HW_AUDIOIN_DATA 0x80
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-audioout.h b/arch/arm/mach-stmp378x/include/mach/regs-audioout.h
deleted file mode 100644
index f533e23..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-audioout.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * stmp378x: AUDIOOUT register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_AUDIOOUT_BASE (STMP3XXX_REGS_BASE + 0x48000)
-#define REGS_AUDIOOUT_PHYS 0x80048000
-#define REGS_AUDIOOUT_SIZE 0x2000
-
-#define HW_AUDIOOUT_CTRL 0x0
-#define BM_AUDIOOUT_CTRL_RUN 0x00000001
-#define BP_AUDIOOUT_CTRL_RUN 0
-#define BM_AUDIOOUT_CTRL_FIFO_ERROR_IRQ_EN 0x00000002
-#define BM_AUDIOOUT_CTRL_FIFO_OVERFLOW_IRQ 0x00000004
-#define BM_AUDIOOUT_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008
-#define BM_AUDIOOUT_CTRL_WORD_LENGTH 0x00000040
-#define BM_AUDIOOUT_CTRL_CLKGATE 0x40000000
-#define BM_AUDIOOUT_CTRL_SFTRST 0x80000000
-
-#define HW_AUDIOOUT_STAT 0x10
-
-#define HW_AUDIOOUT_DACSRR 0x20
-#define BM_AUDIOOUT_DACSRR_SRC_FRAC 0x00001FFF
-#define BP_AUDIOOUT_DACSRR_SRC_FRAC 0
-#define BM_AUDIOOUT_DACSRR_SRC_INT 0x001F0000
-#define BP_AUDIOOUT_DACSRR_SRC_INT 16
-#define BM_AUDIOOUT_DACSRR_SRC_HOLD 0x07000000
-#define BP_AUDIOOUT_DACSRR_SRC_HOLD 24
-#define BM_AUDIOOUT_DACSRR_BASEMULT 0x70000000
-#define BP_AUDIOOUT_DACSRR_BASEMULT 28
-
-#define HW_AUDIOOUT_DACVOLUME 0x30
-#define BM_AUDIOOUT_DACVOLUME_MUTE_RIGHT 0x00000100
-#define BM_AUDIOOUT_DACVOLUME_MUTE_LEFT 0x01000000
-#define BM_AUDIOOUT_DACVOLUME_EN_ZCD 0x02000000
-
-#define HW_AUDIOOUT_DACDEBUG 0x40
-
-#define HW_AUDIOOUT_HPVOL 0x50
-#define BM_AUDIOOUT_HPVOL_MUTE 0x01000000
-#define BM_AUDIOOUT_HPVOL_EN_MSTR_ZCD 0x02000000
-
-#define HW_AUDIOOUT_PWRDN 0x70
-#define BM_AUDIOOUT_PWRDN_HEADPHONE 0x00000001
-#define BP_AUDIOOUT_PWRDN_HEADPHONE 0
-#define BM_AUDIOOUT_PWRDN_CAPLESS 0x00000010
-#define BM_AUDIOOUT_PWRDN_ADC 0x00000100
-#define BM_AUDIOOUT_PWRDN_DAC 0x00001000
-#define BM_AUDIOOUT_PWRDN_RIGHT_ADC 0x00010000
-#define BM_AUDIOOUT_PWRDN_SPEAKER 0x01000000
-
-#define HW_AUDIOOUT_REFCTRL 0x80
-#define BM_AUDIOOUT_REFCTRL_VAG_VAL 0x000000F0
-#define BP_AUDIOOUT_REFCTRL_VAG_VAL 4
-#define BM_AUDIOOUT_REFCTRL_ADC_REFVAL 0x00000F00
-#define BP_AUDIOOUT_REFCTRL_ADC_REFVAL 8
-#define BM_AUDIOOUT_REFCTRL_ADJ_VAG 0x00001000
-#define BM_AUDIOOUT_REFCTRL_ADJ_ADC 0x00002000
-#define BM_AUDIOOUT_REFCTRL_BIAS_CTRL 0x00030000
-#define BP_AUDIOOUT_REFCTRL_BIAS_CTRL 16
-#define BM_AUDIOOUT_REFCTRL_LOW_PWR 0x00080000
-#define BM_AUDIOOUT_REFCTRL_VBG_ADJ 0x00700000
-#define BP_AUDIOOUT_REFCTRL_VBG_ADJ 20
-#define BM_AUDIOOUT_REFCTRL_XTAL_BGR_BIAS 0x01000000
-#define BM_AUDIOOUT_REFCTRL_RAISE_REF 0x02000000
-
-#define HW_AUDIOOUT_ANACTRL 0x90
-#define BM_AUDIOOUT_ANACTRL_HP_CLASSAB 0x00000010
-#define BM_AUDIOOUT_ANACTRL_HP_HOLD_GND 0x00000020
-
-#define HW_AUDIOOUT_TEST 0xA0
-#define BM_AUDIOOUT_TEST_HP_I1_ADJ 0x00C00000
-#define BP_AUDIOOUT_TEST_HP_I1_ADJ 22
-
-#define HW_AUDIOOUT_BISTCTRL 0xB0
-
-#define HW_AUDIOOUT_BISTSTAT0 0xC0
-
-#define HW_AUDIOOUT_BISTSTAT1 0xD0
-
-#define HW_AUDIOOUT_ANACLKCTRL 0xE0
-#define BM_AUDIOOUT_ANACLKCTRL_CLKGATE 0x80000000
-
-#define HW_AUDIOOUT_DATA 0xF0
-
-#define HW_AUDIOOUT_SPEAKERCTRL 0x100
-#define BM_AUDIOOUT_SPEAKERCTRL_MUTE 0x01000000
-
-#define HW_AUDIOOUT_VERSION 0x200
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-bch.h b/arch/arm/mach-stmp378x/include/mach/regs-bch.h
deleted file mode 100644
index 532d246..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-bch.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * stmp378x: BCH register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_BCH_BASE (STMP3XXX_REGS_BASE + 0xA000)
-#define REGS_BCH_PHYS 0x8000A000
-#define REGS_BCH_SIZE 0x2000
-
-#define HW_BCH_CTRL 0x0
-#define BM_BCH_CTRL_COMPLETE_IRQ 0x00000001
-#define BP_BCH_CTRL_COMPLETE_IRQ 0
-#define BM_BCH_CTRL_COMPLETE_IRQ_EN 0x00000100
-
-#define HW_BCH_STATUS0 0x10
-#define BM_BCH_STATUS0_UNCORRECTABLE 0x00000004
-#define BM_BCH_STATUS0_CORRECTED 0x00000008
-#define BM_BCH_STATUS0_STATUS_BLK0 0x0000FF00
-#define BP_BCH_STATUS0_STATUS_BLK0 8
-#define BM_BCH_STATUS0_COMPLETED_CE 0x000F0000
-#define BP_BCH_STATUS0_COMPLETED_CE 16
-
-#define HW_BCH_LAYOUTSELECT 0x70
-
-#define HW_BCH_FLASH0LAYOUT0 0x80
-#define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE 0x00000FFF
-#define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE 0
-#define BM_BCH_FLASH0LAYOUT0_ECC0 0x0000F000
-#define BP_BCH_FLASH0LAYOUT0_ECC0 12
-#define BM_BCH_FLASH0LAYOUT0_META_SIZE 0x00FF0000
-#define BP_BCH_FLASH0LAYOUT0_META_SIZE 16
-#define BM_BCH_FLASH0LAYOUT0_NBLOCKS 0xFF000000
-#define BP_BCH_FLASH0LAYOUT0_NBLOCKS 24
-#define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE 0x00000FFF
-#define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE 0
-#define BM_BCH_FLASH0LAYOUT1_ECCN 0x0000F000
-#define BP_BCH_FLASH0LAYOUT1_ECCN 12
-#define BM_BCH_FLASH0LAYOUT1_PAGE_SIZE 0xFFFF0000
-#define BP_BCH_FLASH0LAYOUT1_PAGE_SIZE 16
-
-#define HW_BCH_BLOCKNAME 0x150
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h
deleted file mode 100644
index 7c546af..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * stmp378x: CLKCTRL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_CLKCTRL
-#define _MACH_REGS_CLKCTRL
-
-#define REGS_CLKCTRL_BASE (STMP3XXX_REGS_BASE + 0x40000)
-#define REGS_CLKCTRL_PHYS 0x80040000
-#define REGS_CLKCTRL_SIZE 0x2000
-
-#define HW_CLKCTRL_PLLCTRL0 0x0
-#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS 0x00040000
-
-#define HW_CLKCTRL_CPU 0x20
-#define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F
-#define BP_CLKCTRL_CPU_DIV_CPU 0
-
-#define HW_CLKCTRL_HBUS 0x30
-#define BM_CLKCTRL_HBUS_DIV 0x0000001F
-#define BP_CLKCTRL_HBUS_DIV 0
-#define BM_CLKCTRL_HBUS_DIV_FRAC_EN 0x00000020
-
-#define HW_CLKCTRL_XBUS 0x40
-
-#define HW_CLKCTRL_XTAL 0x50
-#define BM_CLKCTRL_XTAL_DRI_CLK24M_GATE 0x10000000
-
-#define HW_CLKCTRL_PIX 0x60
-#define BM_CLKCTRL_PIX_DIV 0x00000FFF
-#define BP_CLKCTRL_PIX_DIV 0
-#define BM_CLKCTRL_PIX_CLKGATE 0x80000000
-
-#define HW_CLKCTRL_SSP 0x70
-
-#define HW_CLKCTRL_GPMI 0x80
-
-#define HW_CLKCTRL_SPDIF 0x90
-
-#define HW_CLKCTRL_EMI 0xA0
-#define BM_CLKCTRL_EMI_DIV_EMI 0x0000003F
-#define BP_CLKCTRL_EMI_DIV_EMI 0
-#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE 0x00010000
-#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC 0x00020000
-#define BM_CLKCTRL_EMI_BUSY_REF_EMI 0x10000000
-#define BM_CLKCTRL_EMI_BUSY_REF_XTAL 0x20000000
-
-#define HW_CLKCTRL_IR 0xB0
-
-#define HW_CLKCTRL_SAIF 0xC0
-
-#define HW_CLKCTRL_TV 0xD0
-
-#define HW_CLKCTRL_ETM 0xE0
-
-#define HW_CLKCTRL_FRAC 0xF0
-#define BM_CLKCTRL_FRAC_EMIFRAC 0x00003F00
-#define BP_CLKCTRL_FRAC_EMIFRAC 8
-#define BM_CLKCTRL_FRAC_PIXFRAC 0x003F0000
-#define BP_CLKCTRL_FRAC_PIXFRAC 16
-#define BM_CLKCTRL_FRAC_CLKGATEPIX 0x00800000
-
-#define HW_CLKCTRL_FRAC1 0x100
-
-#define HW_CLKCTRL_CLKSEQ 0x110
-#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX 0x00000002
-
-#define HW_CLKCTRL_RESET 0x120
-#define BM_CLKCTRL_RESET_DIG 0x00000001
-#define BP_CLKCTRL_RESET_DIG 0
-
-#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dcp.h b/arch/arm/mach-stmp378x/include/mach/regs-dcp.h
deleted file mode 100644
index fdedd00..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-dcp.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * stmp378x: DCP register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_DCP_BASE (STMP3XXX_REGS_BASE + 0x28000)
-#define REGS_DCP_PHYS 0x80028000
-#define REGS_DCP_SIZE 0x2000
-
-#define HW_DCP_CTRL 0x0
-#define BM_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE 0x000000FF
-#define BP_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE 0
-#define BM_DCP_CTRL_ENABLE_CONTEXT_CACHING 0x00400000
-#define BM_DCP_CTRL_GATHER_RESIDUAL_WRITES 0x00800000
-#define BM_DCP_CTRL_CLKGATE 0x40000000
-#define BM_DCP_CTRL_SFTRST 0x80000000
-
-#define HW_DCP_STAT 0x10
-#define BM_DCP_STAT_IRQ 0x0000000F
-#define BP_DCP_STAT_IRQ 0
-
-#define HW_DCP_CHANNELCTRL 0x20
-#define BM_DCP_CHANNELCTRL_ENABLE_CHANNEL 0x000000FF
-#define BP_DCP_CHANNELCTRL_ENABLE_CHANNEL 0
-
-#define HW_DCP_CONTEXT 0x50
-#define BM_DCP_PACKET1_INTERRUPT 0x00000001
-#define BP_DCP_PACKET1_INTERRUPT 0
-#define BM_DCP_PACKET1_DECR_SEMAPHORE 0x00000002
-#define BM_DCP_PACKET1_CHAIN 0x00000004
-#define BM_DCP_PACKET1_CHAIN_CONTIGUOUS 0x00000008
-#define BM_DCP_PACKET1_ENABLE_CIPHER 0x00000020
-#define BM_DCP_PACKET1_ENABLE_HASH 0x00000040
-#define BM_DCP_PACKET1_CIPHER_ENCRYPT 0x00000100
-#define BM_DCP_PACKET1_CIPHER_INIT 0x00000200
-#define BM_DCP_PACKET1_OTP_KEY 0x00000400
-#define BM_DCP_PACKET1_PAYLOAD_KEY 0x00000800
-#define BM_DCP_PACKET1_HASH_INIT 0x00001000
-#define BM_DCP_PACKET1_HASH_TERM 0x00002000
-#define BM_DCP_PACKET2_CIPHER_SELECT 0x0000000F
-#define BP_DCP_PACKET2_CIPHER_SELECT 0
-#define BM_DCP_PACKET2_CIPHER_MODE 0x000000F0
-#define BP_DCP_PACKET2_CIPHER_MODE 4
-#define BM_DCP_PACKET2_KEY_SELECT 0x0000FF00
-#define BP_DCP_PACKET2_KEY_SELECT 8
-#define BM_DCP_PACKET2_HASH_SELECT 0x000F0000
-#define BP_DCP_PACKET2_HASH_SELECT 16
-#define BM_DCP_PACKET2_CIPHER_CFG 0xFF000000
-#define BP_DCP_PACKET2_CIPHER_CFG 24
-
-#define HW_DCP_CH0CMDPTR (0x100 + 0 * 0x40)
-#define HW_DCP_CH1CMDPTR (0x100 + 1 * 0x40)
-#define HW_DCP_CH2CMDPTR (0x100 + 2 * 0x40)
-#define HW_DCP_CH3CMDPTR (0x100 + 3 * 0x40)
-
-#define HW_DCP_CHnCMDPTR 0x100
-
-#define HW_DCP_CH0SEMA (0x110 + 0 * 0x40)
-#define HW_DCP_CH1SEMA (0x110 + 1 * 0x40)
-#define HW_DCP_CH2SEMA (0x110 + 2 * 0x40)
-#define HW_DCP_CH3SEMA (0x110 + 3 * 0x40)
-
-#define HW_DCP_CHnSEMA 0x110
-#define BM_DCP_CHnSEMA_INCREMENT 0x000000FF
-#define BP_DCP_CHnSEMA_INCREMENT 0
-
-#define HW_DCP_CH0STAT (0x120 + 0 * 0x40)
-#define HW_DCP_CH1STAT (0x120 + 1 * 0x40)
-#define HW_DCP_CH2STAT (0x120 + 2 * 0x40)
-#define HW_DCP_CH3STAT (0x120 + 3 * 0x40)
-
-#define HW_DCP_CHnSTAT 0x120
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-digctl.h b/arch/arm/mach-stmp378x/include/mach/regs-digctl.h
deleted file mode 100644
index 5293005..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-digctl.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * stmp378x: DIGCTL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_DIGCTL_BASE (STMP3XXX_REGS_BASE + 0x1C000)
-#define REGS_DIGCTL_PHYS 0x8001C000
-#define REGS_DIGCTL_SIZE 0x2000
-
-#define HW_DIGCTL_CTRL 0x0
-#define BM_DIGCTL_CTRL_USB_CLKGATE 0x00000004
-
-#define HW_DIGCTL_ARMCACHE 0x2B0
-#define BM_DIGCTL_ARMCACHE_ITAG_SS 0x00000003
-#define BP_DIGCTL_ARMCACHE_ITAG_SS 0
-#define BM_DIGCTL_ARMCACHE_DTAG_SS 0x00000030
-#define BP_DIGCTL_ARMCACHE_DTAG_SS 4
-#define BM_DIGCTL_ARMCACHE_CACHE_SS 0x00000300
-#define BP_DIGCTL_ARMCACHE_CACHE_SS 8
-#define BM_DIGCTL_ARMCACHE_DRTY_SS 0x00003000
-#define BP_DIGCTL_ARMCACHE_DRTY_SS 12
-#define BM_DIGCTL_ARMCACHE_VALID_SS 0x00030000
-#define BP_DIGCTL_ARMCACHE_VALID_SS 16
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dram.h b/arch/arm/mach-stmp378x/include/mach/regs-dram.h
deleted file mode 100644
index 0285143..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-dram.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * stmp378x: DRAM register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_DRAM_BASE (STMP3XXX_REGS_BASE + 0xE0000)
-#define REGS_DRAM_PHYS 0x800E0000
-#define REGS_DRAM_SIZE 0x2000
-
-#define HW_DRAM_CTL06 0x18
-
-#define HW_DRAM_CTL08 0x20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dri.h b/arch/arm/mach-stmp378x/include/mach/regs-dri.h
deleted file mode 100644
index da25f7e..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-dri.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * stmp378x: DRI register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_DRI_BASE (STMP3XXX_REGS_BASE + 0x74000)
-#define REGS_DRI_PHYS 0x80074000
-#define REGS_DRI_SIZE 0x2000
-
-#define HW_DRI_CTRL 0x0
-#define BM_DRI_CTRL_RUN 0x00000001
-#define BP_DRI_CTRL_RUN 0
-#define BM_DRI_CTRL_ATTENTION_IRQ 0x00000002
-#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ 0x00000004
-#define BM_DRI_CTRL_OVERFLOW_IRQ 0x00000008
-#define BM_DRI_CTRL_ATTENTION_IRQ_EN 0x00000200
-#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ_EN 0x00000400
-#define BM_DRI_CTRL_OVERFLOW_IRQ_EN 0x00000800
-#define BM_DRI_CTRL_REACQUIRE_PHASE 0x00008000
-#define BM_DRI_CTRL_STOP_ON_PILOT_ERROR 0x02000000
-#define BM_DRI_CTRL_STOP_ON_OFLOW_ERROR 0x04000000
-#define BM_DRI_CTRL_ENABLE_INPUTS 0x20000000
-#define BM_DRI_CTRL_CLKGATE 0x40000000
-#define BM_DRI_CTRL_SFTRST 0x80000000
-
-#define HW_DRI_TIMING 0x10
-#define BM_DRI_TIMING_GAP_DETECTION_INTERVAL 0x000000FF
-#define BP_DRI_TIMING_GAP_DETECTION_INTERVAL 0
-#define BM_DRI_TIMING_PILOT_REP_RATE 0x000F0000
-#define BP_DRI_TIMING_PILOT_REP_RATE 16
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h b/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h
deleted file mode 100644
index cc353be..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * stmp378x: ECC8 register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_ECC8_BASE (STMP3XXX_REGS_BASE + 0x8000)
-#define REGS_ECC8_PHYS 0x80008000
-#define REGS_ECC8_SIZE 0x2000
-
-#define HW_ECC8_CTRL 0x0
-#define BM_ECC8_CTRL_COMPLETE_IRQ 0x00000001
-#define BP_ECC8_CTRL_COMPLETE_IRQ 0
-#define BM_ECC8_CTRL_COMPLETE_IRQ_EN 0x00000100
-#define BM_ECC8_CTRL_AHBM_SFTRST 0x20000000
-
-#define HW_ECC8_STATUS0 0x10
-#define BM_ECC8_STATUS0_UNCORRECTABLE 0x00000004
-#define BM_ECC8_STATUS0_CORRECTED 0x00000008
-#define BM_ECC8_STATUS0_STATUS_AUX 0x00000F00
-#define BP_ECC8_STATUS0_STATUS_AUX 8
-#define BM_ECC8_STATUS0_COMPLETED_CE 0x000F0000
-#define BP_ECC8_STATUS0_COMPLETED_CE 16
-
-#define HW_ECC8_STATUS1 0x20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-emi.h b/arch/arm/mach-stmp378x/include/mach/regs-emi.h
deleted file mode 100644
index 98773fc..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-emi.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * stmp378x: EMI register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_EMI_BASE (STMP3XXX_REGS_BASE + 0x20000)
-#define REGS_EMI_PHYS 0x80020000
-#define REGS_EMI_SIZE 0x2000
-
-#define HW_EMI_STAT 0x10
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h b/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h
deleted file mode 100644
index 2cc8bbe..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * stmp378x: GPMI register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_GPMI_BASE (STMP3XXX_REGS_BASE + 0xC000)
-#define REGS_GPMI_PHYS 0x8000C000
-#define REGS_GPMI_SIZE 0x2000
-
-#define HW_GPMI_CTRL0 0x0
-#define BM_GPMI_CTRL0_XFER_COUNT 0x0000FFFF
-#define BP_GPMI_CTRL0_XFER_COUNT 0
-#define BM_GPMI_CTRL0_CS 0x00300000
-#define BP_GPMI_CTRL0_CS 20
-#define BM_GPMI_CTRL0_LOCK_CS 0x00400000
-#define BM_GPMI_CTRL0_WORD_LENGTH 0x00800000
-#define BM_GPMI_CTRL0_ADDRESS 0x000E0000
-#define BP_GPMI_CTRL0_ADDRESS 17
-#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA 0x0
-#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE 0x1
-#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE 0x2
-#define BM_GPMI_CTRL0_ADDRESS_INCREMENT 0x00010000
-#define BM_GPMI_CTRL0_COMMAND_MODE 0x03000000
-#define BP_GPMI_CTRL0_COMMAND_MODE 24
-#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE 0x0
-#define BV_GPMI_CTRL0_COMMAND_MODE__READ 0x1
-#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
-#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY 0x3
-#define BM_GPMI_CTRL0_RUN 0x20000000
-#define BM_GPMI_CTRL0_CLKGATE 0x40000000
-#define BM_GPMI_CTRL0_SFTRST 0x80000000
-#define BM_GPMI_ECCCTRL_BUFFER_MASK 0x000001FF
-#define BP_GPMI_ECCCTRL_BUFFER_MASK 0
-#define BM_GPMI_ECCCTRL_ENABLE_ECC 0x00001000
-#define BM_GPMI_ECCCTRL_ECC_CMD 0x00006000
-#define BP_GPMI_ECCCTRL_ECC_CMD 13
-#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_4_BIT 0
-#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_4_BIT 1
-#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_8_BIT 2
-#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_8_BIT 3
-
-#define HW_GPMI_CTRL1 0x60
-#define BM_GPMI_CTRL1_GPMI_MODE 0x00000001
-#define BP_GPMI_CTRL1_GPMI_MODE 0
-#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY 0x00000004
-#define BM_GPMI_CTRL1_DEV_RESET 0x00000008
-#define BM_GPMI_CTRL1_TIMEOUT_IRQ 0x00000200
-#define BM_GPMI_CTRL1_DEV_IRQ 0x00000400
-#define BM_GPMI_CTRL1_RDN_DELAY 0x0000F000
-#define BP_GPMI_CTRL1_RDN_DELAY 12
-#define BM_GPMI_CTRL1_BCH_MODE 0x00040000
-
-#define HW_GPMI_TIMING0 0x70
-#define BM_GPMI_TIMING0_DATA_SETUP 0x000000FF
-#define BP_GPMI_TIMING0_DATA_SETUP 0
-#define BM_GPMI_TIMING0_DATA_HOLD 0x0000FF00
-#define BP_GPMI_TIMING0_DATA_HOLD 8
-#define BM_GPMI_TIMING0_ADDRESS_SETUP 0x00FF0000
-#define BP_GPMI_TIMING0_ADDRESS_SETUP 16
-
-#define HW_GPMI_TIMING1 0x80
-#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 0xFFFF0000
-#define BP_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 16
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-i2c.h b/arch/arm/mach-stmp378x/include/mach/regs-i2c.h
deleted file mode 100644
index 13a234c..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-i2c.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * stmp378x: I2C register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_I2C_BASE (STMP3XXX_REGS_BASE + 0x58000)
-#define REGS_I2C_PHYS 0x80058000
-#define REGS_I2C_SIZE 0x2000
-
-#define HW_I2C_CTRL0 0x0
-#define BM_I2C_CTRL0_XFER_COUNT 0x0000FFFF
-#define BP_I2C_CTRL0_XFER_COUNT 0
-#define BM_I2C_CTRL0_DIRECTION 0x00010000
-#define BM_I2C_CTRL0_MASTER_MODE 0x00020000
-#define BM_I2C_CTRL0_PRE_SEND_START 0x00080000
-#define BM_I2C_CTRL0_POST_SEND_STOP 0x00100000
-#define BM_I2C_CTRL0_RETAIN_CLOCK 0x00200000
-#define BM_I2C_CTRL0_SEND_NAK_ON_LAST 0x02000000
-#define BM_I2C_CTRL0_CLKGATE 0x40000000
-#define BM_I2C_CTRL0_SFTRST 0x80000000
-
-#define HW_I2C_TIMING0 0x10
-
-#define HW_I2C_TIMING1 0x20
-
-#define HW_I2C_TIMING2 0x30
-
-#define HW_I2C_CTRL1 0x40
-#define BM_I2C_CTRL1_SLAVE_IRQ 0x00000001
-#define BP_I2C_CTRL1_SLAVE_IRQ 0
-#define BM_I2C_CTRL1_SLAVE_STOP_IRQ 0x00000002
-#define BM_I2C_CTRL1_MASTER_LOSS_IRQ 0x00000004
-#define BM_I2C_CTRL1_EARLY_TERM_IRQ 0x00000008
-#define BM_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ 0x00000010
-#define BM_I2C_CTRL1_NO_SLAVE_ACK_IRQ 0x00000020
-#define BM_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ 0x00000040
-#define BM_I2C_CTRL1_BUS_FREE_IRQ 0x00000080
-#define BM_I2C_CTRL1_CLR_GOT_A_NAK 0x10000000
-
-#define HW_I2C_VERSION 0x90
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-icoll.h b/arch/arm/mach-stmp378x/include/mach/regs-icoll.h
deleted file mode 100644
index f996e80..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-icoll.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * stmp378x: ICOLL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_ICOLL
-#define _MACH_REGS_ICOLL
-
-#define REGS_ICOLL_BASE (STMP3XXX_REGS_BASE + 0x0)
-#define REGS_ICOLL_PHYS 0x80000000
-#define REGS_ICOLL_SIZE 0x2000
-
-#define HW_ICOLL_VECTOR 0x0
-
-#define HW_ICOLL_LEVELACK 0x10
-#define BM_ICOLL_LEVELACK_IRQLEVELACK 0x0000000F
-#define BP_ICOLL_LEVELACK_IRQLEVELACK 0
-
-#define HW_ICOLL_CTRL 0x20
-#define BM_ICOLL_CTRL_CLKGATE 0x40000000
-#define BM_ICOLL_CTRL_SFTRST 0x80000000
-
-#define HW_ICOLL_STAT 0x70
-
-#define HW_ICOLL_INTERRUPTn 0x120
-
-#define HW_ICOLL_INTERRUPTn 0x120
-#define BM_ICOLL_INTERRUPTn_ENABLE 0x00000004
-
-#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ir.h b/arch/arm/mach-stmp378x/include/mach/regs-ir.h
deleted file mode 100644
index a5b4ef1..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-ir.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * stmp378x: IR register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_IR_BASE (STMP3XXX_REGS_BASE + 0x78000)
-#define REGS_IR_PHYS 0x80078000
-#define REGS_IR_SIZE 0x2000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h b/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h
deleted file mode 100644
index 9cdbef4..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * stmp378x: LCDIF register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_LCDIF_BASE (STMP3XXX_REGS_BASE + 0x30000)
-#define REGS_LCDIF_PHYS 0x80030000
-#define REGS_LCDIF_SIZE 0x2000
-
-#define HW_LCDIF_CTRL 0x0
-#define BM_LCDIF_CTRL_RUN 0x00000001
-#define BP_LCDIF_CTRL_RUN 0
-#define BM_LCDIF_CTRL_LCDIF_MASTER 0x00000020
-#define BM_LCDIF_CTRL_RGB_TO_YCBCR422_CSC 0x00000080
-#define BM_LCDIF_CTRL_WORD_LENGTH 0x00000300
-#define BP_LCDIF_CTRL_WORD_LENGTH 8
-#define BM_LCDIF_CTRL_LCD_DATABUS_WIDTH 0x00000C00
-#define BP_LCDIF_CTRL_LCD_DATABUS_WIDTH 10
-#define BM_LCDIF_CTRL_INPUT_DATA_SWIZZLE 0x0000C000
-#define BP_LCDIF_CTRL_INPUT_DATA_SWIZZLE 14
-#define BM_LCDIF_CTRL_DATA_SELECT 0x00010000
-#define BM_LCDIF_CTRL_DOTCLK_MODE 0x00020000
-#define BM_LCDIF_CTRL_VSYNC_MODE 0x00040000
-#define BM_LCDIF_CTRL_BYPASS_COUNT 0x00080000
-#define BM_LCDIF_CTRL_DVI_MODE 0x00100000
-#define BM_LCDIF_CTRL_SHIFT_NUM_BITS 0x03E00000
-#define BP_LCDIF_CTRL_SHIFT_NUM_BITS 21
-#define BM_LCDIF_CTRL_DATA_SHIFT_DIR 0x04000000
-#define BM_LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE 0x08000000
-#define BM_LCDIF_CTRL_CLKGATE 0x40000000
-#define BM_LCDIF_CTRL_SFTRST 0x80000000
-
-#define HW_LCDIF_CTRL1 0x10
-#define BM_LCDIF_CTRL1_RESET 0x00000001
-#define BP_LCDIF_CTRL1_RESET 0
-#define BM_LCDIF_CTRL1_MODE86 0x00000002
-#define BM_LCDIF_CTRL1_BUSY_ENABLE 0x00000004
-#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ 0x00000100
-#define BM_LCDIF_CTRL1_CUR_FRAME_DONE_IRQ 0x00000200
-#define BM_LCDIF_CTRL1_UNDERFLOW_IRQ 0x00000400
-#define BM_LCDIF_CTRL1_OVERFLOW_IRQ 0x00000800
-#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN 0x00001000
-#define BM_LCDIF_CTRL1_BYTE_PACKING_FORMAT 0x000F0000
-#define BP_LCDIF_CTRL1_BYTE_PACKING_FORMAT 16
-#define BM_LCDIF_CTRL1_INTERLACE_FIELDS 0x00800000
-#define BM_LCDIF_CTRL1_RECOVER_ON_UNDERFLOW 0x01000000
-
-#define HW_LCDIF_TRANSFER_COUNT 0x20
-#define BM_LCDIF_TRANSFER_COUNT_H_COUNT 0x0000FFFF
-#define BP_LCDIF_TRANSFER_COUNT_H_COUNT 0
-#define BM_LCDIF_TRANSFER_COUNT_V_COUNT 0xFFFF0000
-#define BP_LCDIF_TRANSFER_COUNT_V_COUNT 16
-
-#define HW_LCDIF_CUR_BUF 0x30
-
-#define HW_LCDIF_NEXT_BUF 0x40
-
-#define HW_LCDIF_TIMING 0x60
-
-#define HW_LCDIF_VDCTRL0 0x70
-#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH 0x0003FFFF
-#define BP_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH 0
-#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT 0x00100000
-#define BM_LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT 0x00200000
-#define BM_LCDIF_VDCTRL0_ENABLE_POL 0x01000000
-#define BM_LCDIF_VDCTRL0_DOTCLK_POL 0x02000000
-#define BM_LCDIF_VDCTRL0_HSYNC_POL 0x04000000
-#define BM_LCDIF_VDCTRL0_VSYNC_POL 0x08000000
-#define BM_LCDIF_VDCTRL0_ENABLE_PRESENT 0x10000000
-#define BM_LCDIF_VDCTRL0_VSYNC_OEB 0x20000000
-
-#define HW_LCDIF_VDCTRL1 0x80
-#define BM_LCDIF_VDCTRL1_VSYNC_PERIOD 0xFFFFFFFF
-#define BP_LCDIF_VDCTRL1_VSYNC_PERIOD 0
-
-#define HW_LCDIF_VDCTRL2 0x90
-#define BM_LCDIF_VDCTRL2_HSYNC_PERIOD 0x0003FFFF
-#define BP_LCDIF_VDCTRL2_HSYNC_PERIOD 0
-#define BM_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH 0xFF000000
-#define BP_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH 24
-
-#define HW_LCDIF_VDCTRL3 0xA0
-#define BM_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT 0x0000FFFF
-#define BP_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT 0
-#define BM_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT 0x0FFF0000
-#define BP_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT 16
-
-#define HW_LCDIF_VDCTRL4 0xB0
-#define BM_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT 0x0003FFFF
-#define BP_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT 0
-#define BM_LCDIF_VDCTRL4_SYNC_SIGNALS_ON 0x00040000
-
-#define HW_LCDIF_DVICTRL0 0xC0
-#define BM_LCDIF_DVICTRL0_V_LINES_CNT 0x000003FF
-#define BP_LCDIF_DVICTRL0_V_LINES_CNT 0
-#define BM_LCDIF_DVICTRL0_H_BLANKING_CNT 0x000FFC00
-#define BP_LCDIF_DVICTRL0_H_BLANKING_CNT 10
-#define BM_LCDIF_DVICTRL0_H_ACTIVE_CNT 0x7FF00000
-#define BP_LCDIF_DVICTRL0_H_ACTIVE_CNT 20
-
-#define HW_LCDIF_DVICTRL1 0xD0
-#define BM_LCDIF_DVICTRL1_F2_START_LINE 0x000003FF
-#define BP_LCDIF_DVICTRL1_F2_START_LINE 0
-#define BM_LCDIF_DVICTRL1_F1_END_LINE 0x000FFC00
-#define BP_LCDIF_DVICTRL1_F1_END_LINE 10
-#define BM_LCDIF_DVICTRL1_F1_START_LINE 0x3FF00000
-#define BP_LCDIF_DVICTRL1_F1_START_LINE 20
-
-#define HW_LCDIF_DVICTRL2 0xE0
-#define BM_LCDIF_DVICTRL2_V1_BLANK_END_LINE 0x000003FF
-#define BP_LCDIF_DVICTRL2_V1_BLANK_END_LINE 0
-#define BM_LCDIF_DVICTRL2_V1_BLANK_START_LINE 0x000FFC00
-#define BP_LCDIF_DVICTRL2_V1_BLANK_START_LINE 10
-#define BM_LCDIF_DVICTRL2_F2_END_LINE 0x3FF00000
-#define BP_LCDIF_DVICTRL2_F2_END_LINE 20
-
-#define HW_LCDIF_DVICTRL3 0xF0
-#define BM_LCDIF_DVICTRL3_V2_BLANK_END_LINE 0x000003FF
-#define BP_LCDIF_DVICTRL3_V2_BLANK_END_LINE 0
-#define BM_LCDIF_DVICTRL3_V2_BLANK_START_LINE 0x03FF0000
-#define BP_LCDIF_DVICTRL3_V2_BLANK_START_LINE 16
-
-#define HW_LCDIF_DVICTRL4 0x100
-#define BM_LCDIF_DVICTRL4_H_FILL_CNT 0x000000FF
-#define BP_LCDIF_DVICTRL4_H_FILL_CNT 0
-#define BM_LCDIF_DVICTRL4_CR_FILL_VALUE 0x0000FF00
-#define BP_LCDIF_DVICTRL4_CR_FILL_VALUE 8
-#define BM_LCDIF_DVICTRL4_CB_FILL_VALUE 0x00FF0000
-#define BP_LCDIF_DVICTRL4_CB_FILL_VALUE 16
-#define BM_LCDIF_DVICTRL4_Y_FILL_VALUE 0xFF000000
-#define BP_LCDIF_DVICTRL4_Y_FILL_VALUE 24
-
-#define HW_LCDIF_CSC_COEFF0 0x110
-#define BM_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER 0x00000003
-#define BP_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER 0
-#define BM_LCDIF_CSC_COEFF0_C0 0x03FF0000
-#define BP_LCDIF_CSC_COEFF0_C0 16
-
-#define HW_LCDIF_CSC_COEFF1 0x120
-#define BM_LCDIF_CSC_COEFF1_C1 0x000003FF
-#define BP_LCDIF_CSC_COEFF1_C1 0
-#define BM_LCDIF_CSC_COEFF1_C2 0x03FF0000
-#define BP_LCDIF_CSC_COEFF1_C2 16
-
-#define HW_LCDIF_CSC_COEFF2 0x130
-#define BM_LCDIF_CSC_COEFF2_C3 0x000003FF
-#define BP_LCDIF_CSC_COEFF2_C3 0
-#define BM_LCDIF_CSC_COEFF2_C4 0x03FF0000
-#define BP_LCDIF_CSC_COEFF2_C4 16
-
-#define HW_LCDIF_CSC_COEFF3 0x140
-#define BM_LCDIF_CSC_COEFF3_C5 0x000003FF
-#define BP_LCDIF_CSC_COEFF3_C5 0
-#define BM_LCDIF_CSC_COEFF3_C6 0x03FF0000
-#define BP_LCDIF_CSC_COEFF3_C6 16
-
-#define HW_LCDIF_CSC_COEFF4 0x150
-#define BM_LCDIF_CSC_COEFF4_C7 0x000003FF
-#define BP_LCDIF_CSC_COEFF4_C7 0
-#define BM_LCDIF_CSC_COEFF4_C8 0x03FF0000
-#define BP_LCDIF_CSC_COEFF4_C8 16
-
-#define HW_LCDIF_CSC_OFFSET 0x160
-#define BM_LCDIF_CSC_OFFSET_Y_OFFSET 0x000001FF
-#define BP_LCDIF_CSC_OFFSET_Y_OFFSET 0
-#define BM_LCDIF_CSC_OFFSET_CBCR_OFFSET 0x01FF0000
-#define BP_LCDIF_CSC_OFFSET_CBCR_OFFSET 16
-
-#define HW_LCDIF_CSC_LIMIT 0x170
-#define BM_LCDIF_CSC_LIMIT_Y_MAX 0x000000FF
-#define BP_LCDIF_CSC_LIMIT_Y_MAX 0
-#define BM_LCDIF_CSC_LIMIT_Y_MIN 0x0000FF00
-#define BP_LCDIF_CSC_LIMIT_Y_MIN 8
-#define BM_LCDIF_CSC_LIMIT_CBCR_MAX 0x00FF0000
-#define BP_LCDIF_CSC_LIMIT_CBCR_MAX 16
-#define BM_LCDIF_CSC_LIMIT_CBCR_MIN 0xFF000000
-#define BP_LCDIF_CSC_LIMIT_CBCR_MIN 24
-
-#define HW_LCDIF_STAT 0x1D0
-#define BM_LCDIF_STAT_TXFIFO_EMPTY 0x04000000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-lradc.h b/arch/arm/mach-stmp378x/include/mach/regs-lradc.h
deleted file mode 100644
index cb8cb06..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-lradc.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * stmp378x: LRADC register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_LRADC_BASE (STMP3XXX_REGS_BASE + 0x50000)
-#define REGS_LRADC_PHYS 0x80050000
-#define REGS_LRADC_SIZE 0x2000
-
-#define HW_LRADC_CTRL0 0x0
-#define BM_LRADC_CTRL0_SCHEDULE 0x000000FF
-#define BP_LRADC_CTRL0_SCHEDULE 0
-#define BM_LRADC_CTRL0_XPLUS_ENABLE 0x00010000
-#define BM_LRADC_CTRL0_YPLUS_ENABLE 0x00020000
-#define BM_LRADC_CTRL0_XMINUS_ENABLE 0x00040000
-#define BM_LRADC_CTRL0_YMINUS_ENABLE 0x00080000
-#define BM_LRADC_CTRL0_TOUCH_DETECT_ENABLE 0x00100000
-#define BM_LRADC_CTRL0_ONCHIP_GROUNDREF 0x00200000
-#define BM_LRADC_CTRL0_CLKGATE 0x40000000
-#define BM_LRADC_CTRL0_SFTRST 0x80000000
-
-#define HW_LRADC_CTRL1 0x10
-#define BM_LRADC_CTRL1_LRADC0_IRQ 0x00000001
-#define BP_LRADC_CTRL1_LRADC0_IRQ 0
-#define BM_LRADC_CTRL1_LRADC5_IRQ 0x00000020
-#define BM_LRADC_CTRL1_LRADC6_IRQ 0x00000040
-#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ 0x00000100
-#define BM_LRADC_CTRL1_LRADC0_IRQ_EN 0x00010000
-#define BM_LRADC_CTRL1_LRADC5_IRQ_EN 0x00200000
-#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ_EN 0x01000000
-
-#define HW_LRADC_CTRL2 0x20
-#define BM_LRADC_CTRL2_BL_BRIGHTNESS 0x001F0000
-#define BP_LRADC_CTRL2_BL_BRIGHTNESS 16
-#define BM_LRADC_CTRL2_BL_MUX_SELECT 0x00200000
-#define BM_LRADC_CTRL2_BL_ENABLE 0x00400000
-#define BM_LRADC_CTRL2_DIVIDE_BY_TWO 0xFF000000
-#define BP_LRADC_CTRL2_DIVIDE_BY_TWO 24
-
-#define HW_LRADC_CTRL3 0x30
-#define BM_LRADC_CTRL3_CYCLE_TIME 0x00000300
-#define BP_LRADC_CTRL3_CYCLE_TIME 8
-
-#define HW_LRADC_STATUS 0x40
-#define BM_LRADC_STATUS_TOUCH_DETECT_RAW 0x00000001
-#define BP_LRADC_STATUS_TOUCH_DETECT_RAW 0
-
-#define HW_LRADC_CH0 (0x50 + 0 * 0x10)
-#define HW_LRADC_CH1 (0x50 + 1 * 0x10)
-#define HW_LRADC_CH2 (0x50 + 2 * 0x10)
-#define HW_LRADC_CH3 (0x50 + 3 * 0x10)
-#define HW_LRADC_CH4 (0x50 + 4 * 0x10)
-#define HW_LRADC_CH5 (0x50 + 5 * 0x10)
-#define HW_LRADC_CH6 (0x50 + 6 * 0x10)
-#define HW_LRADC_CH7 (0x50 + 7 * 0x10)
-
-#define HW_LRADC_CHn 0x50
-#define BM_LRADC_CHn_VALUE 0x0003FFFF
-#define BP_LRADC_CHn_VALUE 0
-#define BM_LRADC_CHn_NUM_SAMPLES 0x1F000000
-#define BP_LRADC_CHn_NUM_SAMPLES 24
-#define BM_LRADC_CHn_ACCUMULATE 0x20000000
-
-#define HW_LRADC_DELAY0 (0xD0 + 0 * 0x10)
-#define HW_LRADC_DELAY1 (0xD0 + 1 * 0x10)
-#define HW_LRADC_DELAY2 (0xD0 + 2 * 0x10)
-#define HW_LRADC_DELAY3 (0xD0 + 3 * 0x10)
-
-#define HW_LRADC_DELAYn 0xD0
-#define BM_LRADC_DELAYn_DELAY 0x000007FF
-#define BP_LRADC_DELAYn_DELAY 0
-#define BM_LRADC_DELAYn_LOOP_COUNT 0x0000F800
-#define BP_LRADC_DELAYn_LOOP_COUNT 11
-#define BM_LRADC_DELAYn_TRIGGER_DELAYS 0x000F0000
-#define BP_LRADC_DELAYn_TRIGGER_DELAYS 16
-#define BM_LRADC_DELAYn_KICK 0x00100000
-#define BM_LRADC_DELAYn_TRIGGER_LRADCS 0xFF000000
-#define BP_LRADC_DELAYn_TRIGGER_LRADCS 24
-
-#define HW_LRADC_CTRL4 0x140
-#define BM_LRADC_CTRL4_LRADC6SELECT 0x0F000000
-#define BP_LRADC_CTRL4_LRADC6SELECT 24
-#define BM_LRADC_CTRL4_LRADC7SELECT 0xF0000000
-#define BP_LRADC_CTRL4_LRADC7SELECT 28
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h b/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h
deleted file mode 100644
index f0af64d..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * stmp378x: OCOTP register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_OCOTP_BASE (STMP3XXX_REGS_BASE + 0x2C000)
-#define REGS_OCOTP_PHYS 0x8002C000
-#define REGS_OCOTP_SIZE 0x2000
-
-#define HW_OCOTP_CTRL 0x0
-#define BM_OCOTP_CTRL_BUSY 0x00000100
-#define BM_OCOTP_CTRL_ERROR 0x00000200
-#define BM_OCOTP_CTRL_RD_BANK_OPEN 0x00001000
-#define BM_OCOTP_CTRL_RELOAD_SHADOWS 0x00002000
-#define BM_OCOTP_CTRL_WR_UNLOCK 0xFFFF0000
-#define BP_OCOTP_CTRL_WR_UNLOCK 16
-
-#define HW_OCOTP_DATA 0x10
-
-#define HW_OCOTP_CUST0 (0x20 + 0 * 0x10)
-#define HW_OCOTP_CUST1 (0x20 + 1 * 0x10)
-#define HW_OCOTP_CUST2 (0x20 + 2 * 0x10)
-#define HW_OCOTP_CUST3 (0x20 + 3 * 0x10)
-
-#define HW_OCOTP_CUSTn 0x20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h
deleted file mode 100644
index 50d90ea..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * stmp378x: PINCTRL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_PINCTRL
-#define _MACH_REGS_PINCTRL
-
-#define REGS_PINCTRL_BASE (STMP3XXX_REGS_BASE + 0x18000)
-#define REGS_PINCTRL_PHYS 0x80018000
-#define REGS_PINCTRL_SIZE 0x2000
-
-#define HW_PINCTRL_MUXSEL0 0x100
-#define HW_PINCTRL_MUXSEL1 0x110
-#define HW_PINCTRL_MUXSEL2 0x120
-#define HW_PINCTRL_MUXSEL3 0x130
-#define HW_PINCTRL_MUXSEL4 0x140
-#define HW_PINCTRL_MUXSEL5 0x150
-#define HW_PINCTRL_MUXSEL6 0x160
-#define HW_PINCTRL_MUXSEL7 0x170
-
-#define HW_PINCTRL_DRIVE0 0x200
-#define HW_PINCTRL_DRIVE1 0x210
-#define HW_PINCTRL_DRIVE2 0x220
-#define HW_PINCTRL_DRIVE3 0x230
-#define HW_PINCTRL_DRIVE4 0x240
-#define HW_PINCTRL_DRIVE5 0x250
-#define HW_PINCTRL_DRIVE6 0x260
-#define HW_PINCTRL_DRIVE7 0x270
-#define HW_PINCTRL_DRIVE8 0x280
-#define HW_PINCTRL_DRIVE9 0x290
-#define HW_PINCTRL_DRIVE10 0x2A0
-#define HW_PINCTRL_DRIVE11 0x2B0
-#define HW_PINCTRL_DRIVE12 0x2C0
-#define HW_PINCTRL_DRIVE13 0x2D0
-#define HW_PINCTRL_DRIVE14 0x2E0
-
-#define HW_PINCTRL_PULL0 0x400
-#define HW_PINCTRL_PULL1 0x410
-#define HW_PINCTRL_PULL2 0x420
-#define HW_PINCTRL_PULL3 0x430
-
-#define HW_PINCTRL_DOUT0 0x500
-#define HW_PINCTRL_DOUT1 0x510
-#define HW_PINCTRL_DOUT2 0x520
-
-#define HW_PINCTRL_DIN0 0x600
-#define HW_PINCTRL_DIN1 0x610
-#define HW_PINCTRL_DIN2 0x620
-
-#define HW_PINCTRL_DOE0 0x700
-#define HW_PINCTRL_DOE1 0x710
-#define HW_PINCTRL_DOE2 0x720
-
-#define HW_PINCTRL_PIN2IRQ0 0x800
-#define HW_PINCTRL_PIN2IRQ1 0x810
-#define HW_PINCTRL_PIN2IRQ2 0x820
-
-#define HW_PINCTRL_IRQEN0 0x900
-#define HW_PINCTRL_IRQEN1 0x910
-#define HW_PINCTRL_IRQEN2 0x920
-
-#define HW_PINCTRL_IRQLEVEL0 0xA00
-#define HW_PINCTRL_IRQLEVEL1 0xA10
-#define HW_PINCTRL_IRQLEVEL2 0xA20
-
-#define HW_PINCTRL_IRQPOL0 0xB00
-#define HW_PINCTRL_IRQPOL1 0xB10
-#define HW_PINCTRL_IRQPOL2 0xB20
-
-#define HW_PINCTRL_IRQSTAT0 0xC00
-#define HW_PINCTRL_IRQSTAT1 0xC10
-#define HW_PINCTRL_IRQSTAT2 0xC20
-
-#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-power.h b/arch/arm/mach-stmp378x/include/mach/regs-power.h
deleted file mode 100644
index e454c83..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-power.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * stmp378x: POWER register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_POWER
-#define _MACH_REGS_POWER
-
-#define REGS_POWER_BASE (STMP3XXX_REGS_BASE + 0x44000)
-#define REGS_POWER_PHYS 0x80044000
-#define REGS_POWER_SIZE 0x2000
-
-#define HW_POWER_CTRL 0x0
-#define BM_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO 0x00000001
-#define BP_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO 0
-#define BM_POWER_CTRL_ENIRQ_PSWITCH 0x00020000
-#define BM_POWER_CTRL_PSWITCH_IRQ 0x00100000
-#define BM_POWER_CTRL_CLKGATE 0x40000000
-
-#define HW_POWER_5VCTRL 0x10
-#define BM_POWER_5VCTRL_ENABLE_LINREG_ILIMIT 0x00000040
-
-#define HW_POWER_MINPWR 0x20
-
-#define HW_POWER_CHARGE 0x30
-
-#define HW_POWER_VDDDCTRL 0x40
-
-#define HW_POWER_VDDACTRL 0x50
-
-#define HW_POWER_VDDIOCTRL 0x60
-#define BM_POWER_VDDIOCTRL_TRG 0x0000001F
-#define BP_POWER_VDDIOCTRL_TRG 0
-
-#define HW_POWER_STS 0xC0
-#define BM_POWER_STS_VBUSVALID 0x00000002
-#define BM_POWER_STS_BVALID 0x00000004
-#define BM_POWER_STS_AVALID 0x00000008
-#define BM_POWER_STS_DC_OK 0x00000200
-
-#define HW_POWER_RESET 0x100
-
-#define HW_POWER_DEBUG 0x110
-#define BM_POWER_DEBUG_BVALIDPIOLOCK 0x00000002
-#define BM_POWER_DEBUG_AVALIDPIOLOCK 0x00000004
-#define BM_POWER_DEBUG_VBUSVALIDPIOLOCK 0x00000008
-
-#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pwm.h b/arch/arm/mach-stmp378x/include/mach/regs-pwm.h
deleted file mode 100644
index 0d0f9e5..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-pwm.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * stmp378x: PWM register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_PWM_BASE (STMP3XXX_REGS_BASE + 0x64000)
-#define REGS_PWM_PHYS 0x80064000
-#define REGS_PWM_SIZE 0x2000
-
-#define HW_PWM_CTRL 0x0
-#define BM_PWM_CTRL_PWM2_ENABLE 0x00000004
-#define BM_PWM_CTRL_PWM2_ANA_CTRL_ENABLE 0x00000020
-
-#define HW_PWM_ACTIVE0 (0x10 + 0 * 0x20)
-#define HW_PWM_ACTIVE1 (0x10 + 1 * 0x20)
-#define HW_PWM_ACTIVE2 (0x10 + 2 * 0x20)
-#define HW_PWM_ACTIVE3 (0x10 + 3 * 0x20)
-
-#define HW_PWM_ACTIVEn 0x10
-#define BM_PWM_ACTIVEn_ACTIVE 0x0000FFFF
-#define BP_PWM_ACTIVEn_ACTIVE 0
-#define BM_PWM_ACTIVEn_INACTIVE 0xFFFF0000
-#define BP_PWM_ACTIVEn_INACTIVE 16
-
-#define HW_PWM_PERIOD0 (0x20 + 0 * 0x20)
-#define HW_PWM_PERIOD1 (0x20 + 1 * 0x20)
-#define HW_PWM_PERIOD2 (0x20 + 2 * 0x20)
-#define HW_PWM_PERIOD3 (0x20 + 3 * 0x20)
-
-#define HW_PWM_PERIODn 0x20
-#define BM_PWM_PERIODn_PERIOD 0x0000FFFF
-#define BP_PWM_PERIODn_PERIOD 0
-#define BM_PWM_PERIODn_ACTIVE_STATE 0x00030000
-#define BP_PWM_PERIODn_ACTIVE_STATE 16
-#define BM_PWM_PERIODn_INACTIVE_STATE 0x000C0000
-#define BP_PWM_PERIODn_INACTIVE_STATE 18
-#define BM_PWM_PERIODn_CDIV 0x00700000
-#define BP_PWM_PERIODn_CDIV 20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pxp.h b/arch/arm/mach-stmp378x/include/mach/regs-pxp.h
deleted file mode 100644
index 54d2978..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-pxp.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * stmp378x: PXP register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_PXP_BASE (STMP3XXX_REGS_BASE + 0x2A000)
-#define REGS_PXP_PHYS 0x8002A000
-#define REGS_PXP_SIZE 0x2000
-
-#define HW_PXP_CTRL 0x0
-#define BM_PXP_CTRL_ENABLE 0x00000001
-#define BP_PXP_CTRL_ENABLE 0
-#define BM_PXP_CTRL_IRQ_ENABLE 0x00000002
-#define BM_PXP_CTRL_OUTPUT_RGB_FORMAT 0x000000F0
-#define BP_PXP_CTRL_OUTPUT_RGB_FORMAT 4
-#define BM_PXP_CTRL_ROTATE 0x00000300
-#define BP_PXP_CTRL_ROTATE 8
-#define BM_PXP_CTRL_HFLIP 0x00000400
-#define BM_PXP_CTRL_VFLIP 0x00000800
-#define BM_PXP_CTRL_S0_FORMAT 0x0000F000
-#define BP_PXP_CTRL_S0_FORMAT 12
-#define BM_PXP_CTRL_SCALE 0x00040000
-#define BM_PXP_CTRL_CROP 0x00080000
-
-#define HW_PXP_STAT 0x10
-#define BM_PXP_STAT_IRQ 0x00000001
-#define BP_PXP_STAT_IRQ 0
-
-#define HW_PXP_RGBBUF 0x20
-
-#define HW_PXP_RGBSIZE 0x40
-#define BM_PXP_RGBSIZE_HEIGHT 0x00000FFF
-#define BP_PXP_RGBSIZE_HEIGHT 0
-#define BM_PXP_RGBSIZE_WIDTH 0x00FFF000
-#define BP_PXP_RGBSIZE_WIDTH 12
-
-#define HW_PXP_S0BUF 0x50
-
-#define HW_PXP_S0UBUF 0x60
-
-#define HW_PXP_S0VBUF 0x70
-
-#define HW_PXP_S0PARAM 0x80
-#define BM_PXP_S0PARAM_HEIGHT 0x000000FF
-#define BP_PXP_S0PARAM_HEIGHT 0
-#define BM_PXP_S0PARAM_WIDTH 0x0000FF00
-#define BP_PXP_S0PARAM_WIDTH 8
-#define BM_PXP_S0PARAM_YBASE 0x00FF0000
-#define BP_PXP_S0PARAM_YBASE 16
-#define BM_PXP_S0PARAM_XBASE 0xFF000000
-#define BP_PXP_S0PARAM_XBASE 24
-
-#define HW_PXP_S0BACKGROUND 0x90
-
-#define HW_PXP_S0CROP 0xA0
-#define BM_PXP_S0CROP_HEIGHT 0x000000FF
-#define BP_PXP_S0CROP_HEIGHT 0
-#define BM_PXP_S0CROP_WIDTH 0x0000FF00
-#define BP_PXP_S0CROP_WIDTH 8
-#define BM_PXP_S0CROP_YBASE 0x00FF0000
-#define BP_PXP_S0CROP_YBASE 16
-#define BM_PXP_S0CROP_XBASE 0xFF000000
-#define BP_PXP_S0CROP_XBASE 24
-
-#define HW_PXP_S0SCALE 0xB0
-#define BM_PXP_S0SCALE_XSCALE 0x00003FFF
-#define BP_PXP_S0SCALE_XSCALE 0
-#define BM_PXP_S0SCALE_YSCALE 0x3FFF0000
-#define BP_PXP_S0SCALE_YSCALE 16
-
-#define HW_PXP_CSCCOEFF0 0xD0
-
-#define HW_PXP_CSCCOEFF1 0xE0
-
-#define HW_PXP_CSCCOEFF2 0xF0
-
-#define HW_PXP_S0COLORKEYLOW 0x180
-
-#define HW_PXP_S0COLORKEYHIGH 0x190
-
-#define HW_PXP_OL0 (0x200 + 0 * 0x40)
-#define HW_PXP_OL1 (0x200 + 1 * 0x40)
-#define HW_PXP_OL2 (0x200 + 2 * 0x40)
-#define HW_PXP_OL3 (0x200 + 3 * 0x40)
-#define HW_PXP_OL4 (0x200 + 4 * 0x40)
-#define HW_PXP_OL5 (0x200 + 5 * 0x40)
-#define HW_PXP_OL6 (0x200 + 6 * 0x40)
-#define HW_PXP_OL7 (0x200 + 7 * 0x40)
-
-#define HW_PXP_OLn 0x200
-
-#define HW_PXP_OL0SIZE (0x210 + 0 * 0x40)
-#define HW_PXP_OL1SIZE (0x210 + 1 * 0x40)
-#define HW_PXP_OL2SIZE (0x210 + 2 * 0x40)
-#define HW_PXP_OL3SIZE (0x210 + 3 * 0x40)
-#define HW_PXP_OL4SIZE (0x210 + 4 * 0x40)
-#define HW_PXP_OL5SIZE (0x210 + 5 * 0x40)
-#define HW_PXP_OL6SIZE (0x210 + 6 * 0x40)
-#define HW_PXP_OL7SIZE (0x210 + 7 * 0x40)
-
-#define HW_PXP_OLnSIZE 0x210
-#define BM_PXP_OLnSIZE_HEIGHT 0x000000FF
-#define BP_PXP_OLnSIZE_HEIGHT 0
-#define BM_PXP_OLnSIZE_WIDTH 0x0000FF00
-#define BP_PXP_OLnSIZE_WIDTH 8
-
-#define HW_PXP_OL0PARAM (0x220 + 0 * 0x40)
-#define HW_PXP_OL1PARAM (0x220 + 1 * 0x40)
-#define HW_PXP_OL2PARAM (0x220 + 2 * 0x40)
-#define HW_PXP_OL3PARAM (0x220 + 3 * 0x40)
-#define HW_PXP_OL4PARAM (0x220 + 4 * 0x40)
-#define HW_PXP_OL5PARAM (0x220 + 5 * 0x40)
-#define HW_PXP_OL6PARAM (0x220 + 6 * 0x40)
-#define HW_PXP_OL7PARAM (0x220 + 7 * 0x40)
-
-#define HW_PXP_OLnPARAM 0x220
-#define BM_PXP_OLnPARAM_ENABLE 0x00000001
-#define BP_PXP_OLnPARAM_ENABLE 0
-#define BM_PXP_OLnPARAM_ALPHA_CNTL 0x00000006
-#define BP_PXP_OLnPARAM_ALPHA_CNTL 1
-#define BM_PXP_OLnPARAM_ENABLE_COLORKEY 0x00000008
-#define BM_PXP_OLnPARAM_FORMAT 0x000000F0
-#define BP_PXP_OLnPARAM_FORMAT 4
-#define BM_PXP_OLnPARAM_ALPHA 0x0000FF00
-#define BP_PXP_OLnPARAM_ALPHA 8
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-rtc.h b/arch/arm/mach-stmp378x/include/mach/regs-rtc.h
deleted file mode 100644
index b8dbd67..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-rtc.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * stmp378x: RTC register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_RTC_BASE (STMP3XXX_REGS_BASE + 0x5C000)
-#define REGS_RTC_PHYS 0x8005C000
-#define REGS_RTC_SIZE 0x2000
-
-#define HW_RTC_CTRL 0x0
-#define BM_RTC_CTRL_ALARM_IRQ_EN 0x00000001
-#define BP_RTC_CTRL_ALARM_IRQ_EN 0
-#define BM_RTC_CTRL_ONEMSEC_IRQ_EN 0x00000002
-#define BM_RTC_CTRL_ALARM_IRQ 0x00000004
-#define BM_RTC_CTRL_ONEMSEC_IRQ 0x00000008
-#define BM_RTC_CTRL_WATCHDOGEN 0x00000010
-
-#define HW_RTC_STAT 0x10
-#define BM_RTC_STAT_NEW_REGS 0x0000FF00
-#define BP_RTC_STAT_NEW_REGS 8
-#define BM_RTC_STAT_STALE_REGS 0x00FF0000
-#define BP_RTC_STAT_STALE_REGS 16
-#define BM_RTC_STAT_RTC_PRESENT 0x80000000
-
-#define HW_RTC_SECONDS 0x30
-
-#define HW_RTC_ALARM 0x40
-
-#define HW_RTC_WATCHDOG 0x50
-
-#define HW_RTC_PERSISTENT0 0x60
-#define BM_RTC_PERSISTENT0_ALARM_WAKE_EN 0x00000002
-#define BM_RTC_PERSISTENT0_ALARM_EN 0x00000004
-#define BM_RTC_PERSISTENT0_XTAL24MHZ_PWRUP 0x00000010
-#define BM_RTC_PERSISTENT0_XTAL32KHZ_PWRUP 0x00000020
-#define BM_RTC_PERSISTENT0_ALARM_WAKE 0x00000080
-#define BM_RTC_PERSISTENT0_SPARE_ANALOG 0xFFFC0000
-#define BP_RTC_PERSISTENT0_SPARE_ANALOG 18
-
-#define HW_RTC_PERSISTENT1 0x70
-#define BM_RTC_PERSISTENT1_GENERAL 0xFFFFFFFF
-#define BP_RTC_PERSISTENT1_GENERAL 0
-
-#define HW_RTC_VERSION 0xD0
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-saif.h b/arch/arm/mach-stmp378x/include/mach/regs-saif.h
deleted file mode 100644
index 6df4176..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-saif.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * stmp378x: SAIF register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_SAIF_SIZE 0x2000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-spdif.h b/arch/arm/mach-stmp378x/include/mach/regs-spdif.h
deleted file mode 100644
index 8015398..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-spdif.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * stmp378x: SPDIF register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_SPDIF_BASE (STMP3XXX_REGS_BASE + 0x54000)
-#define REGS_SPDIF_PHYS 0x80054000
-#define REGS_SPDIF_SIZE 0x2000
-
-#define HW_SPDIF_CTRL 0x0
-#define BM_SPDIF_CTRL_RUN 0x00000001
-#define BP_SPDIF_CTRL_RUN 0
-#define BM_SPDIF_CTRL_FIFO_ERROR_IRQ_EN 0x00000002
-#define BM_SPDIF_CTRL_FIFO_OVERFLOW_IRQ 0x00000004
-#define BM_SPDIF_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008
-#define BM_SPDIF_CTRL_WORD_LENGTH 0x00000010
-#define BM_SPDIF_CTRL_CLKGATE 0x40000000
-#define BM_SPDIF_CTRL_SFTRST 0x80000000
-
-#define HW_SPDIF_STAT 0x10
-
-#define HW_SPDIF_FRAMECTRL 0x20
-
-#define HW_SPDIF_SRR 0x30
-#define BM_SPDIF_SRR_RATE 0x000FFFFF
-#define BP_SPDIF_SRR_RATE 0
-#define BM_SPDIF_SRR_BASEMULT 0x70000000
-#define BP_SPDIF_SRR_BASEMULT 28
-
-#define HW_SPDIF_DEBUG 0x40
-
-#define HW_SPDIF_DATA 0x50
-
-#define HW_SPDIF_VERSION 0x60
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ssp.h b/arch/arm/mach-stmp378x/include/mach/regs-ssp.h
deleted file mode 100644
index 28aacf0..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-ssp.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * stmp378x: SSP register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_SSP1_BASE (STMP3XXX_REGS_BASE + 0x10000)
-#define REGS_SSP1_PHYS 0x80010000
-#define REGS_SSP2_BASE (STMP3XXX_REGS_BASE + 0x34000)
-#define REGS_SSP2_PHYS 0x80034000
-#define REGS_SSP_SIZE 0x2000
-
-#define HW_SSP_CTRL0 0x0
-#define BM_SSP_CTRL0_XFER_COUNT 0x0000FFFF
-#define BP_SSP_CTRL0_XFER_COUNT 0
-#define BM_SSP_CTRL0_ENABLE 0x00010000
-#define BM_SSP_CTRL0_GET_RESP 0x00020000
-#define BM_SSP_CTRL0_LONG_RESP 0x00080000
-#define BM_SSP_CTRL0_WAIT_FOR_CMD 0x00100000
-#define BM_SSP_CTRL0_WAIT_FOR_IRQ 0x00200000
-#define BM_SSP_CTRL0_BUS_WIDTH 0x00C00000
-#define BP_SSP_CTRL0_BUS_WIDTH 22
-#define BM_SSP_CTRL0_DATA_XFER 0x01000000
-#define BM_SSP_CTRL0_READ 0x02000000
-#define BM_SSP_CTRL0_IGNORE_CRC 0x04000000
-#define BM_SSP_CTRL0_LOCK_CS 0x08000000
-#define BM_SSP_CTRL0_RUN 0x20000000
-#define BM_SSP_CTRL0_CLKGATE 0x40000000
-#define BM_SSP_CTRL0_SFTRST 0x80000000
-
-#define HW_SSP_CMD0 0x10
-#define BM_SSP_CMD0_CMD 0x000000FF
-#define BP_SSP_CMD0_CMD 0
-#define BM_SSP_CMD0_BLOCK_COUNT 0x0000FF00
-#define BP_SSP_CMD0_BLOCK_COUNT 8
-#define BM_SSP_CMD0_BLOCK_SIZE 0x000F0000
-#define BP_SSP_CMD0_BLOCK_SIZE 16
-#define BM_SSP_CMD0_APPEND_8CYC 0x00100000
-#define BM_SSP_CMD1_CMD_ARG 0xFFFFFFFF
-#define BP_SSP_CMD1_CMD_ARG 0
-
-#define HW_SSP_TIMING 0x50
-#define BM_SSP_TIMING_CLOCK_RATE 0x000000FF
-#define BP_SSP_TIMING_CLOCK_RATE 0
-#define BM_SSP_TIMING_CLOCK_DIVIDE 0x0000FF00
-#define BP_SSP_TIMING_CLOCK_DIVIDE 8
-#define BM_SSP_TIMING_TIMEOUT 0xFFFF0000
-#define BP_SSP_TIMING_TIMEOUT 16
-
-#define HW_SSP_CTRL1 0x60
-#define BM_SSP_CTRL1_SSP_MODE 0x0000000F
-#define BP_SSP_CTRL1_SSP_MODE 0
-#define BM_SSP_CTRL1_WORD_LENGTH 0x000000F0
-#define BP_SSP_CTRL1_WORD_LENGTH 4
-#define BM_SSP_CTRL1_POLARITY 0x00000200
-#define BM_SSP_CTRL1_PHASE 0x00000400
-#define BM_SSP_CTRL1_DMA_ENABLE 0x00002000
-#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ 0x00008000
-#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN 0x00010000
-#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ 0x00020000
-#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ 0x00200000
-#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN 0x00400000
-#define BM_SSP_CTRL1_DATA_CRC_IRQ 0x00800000
-#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN 0x01000000
-#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ 0x02000000
-#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN 0x04000000
-#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ 0x08000000
-#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN 0x10000000
-#define BM_SSP_CTRL1_RESP_ERR_IRQ 0x20000000
-#define BM_SSP_CTRL1_SDIO_IRQ 0x80000000
-
-#define HW_SSP_DATA 0x70
-
-#define HW_SSP_SDRESP0 0x80
-
-#define HW_SSP_SDRESP1 0x90
-
-#define HW_SSP_SDRESP2 0xA0
-
-#define HW_SSP_SDRESP3 0xB0
-
-#define HW_SSP_STATUS 0xC0
-#define BM_SSP_STATUS_FIFO_EMPTY 0x00000020
-#define BM_SSP_STATUS_TIMEOUT 0x00001000
-#define BM_SSP_STATUS_RESP_TIMEOUT 0x00004000
-#define BM_SSP_STATUS_RESP_ERR 0x00008000
-#define BM_SSP_STATUS_RESP_CRC_ERR 0x00010000
-#define BM_SSP_STATUS_CARD_DETECT 0x10000000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-sydma.h b/arch/arm/mach-stmp378x/include/mach/regs-sydma.h
deleted file mode 100644
index 08343a8..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-sydma.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * stmp378x: SYDMA register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_SYDMA_BASE (STMP3XXX_REGS_BASE + 0x26000)
-#define REGS_SYDMA_PHYS 0x80026000
-#define REGS_SYDMA_SIZE 0x2000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-timrot.h b/arch/arm/mach-stmp378x/include/mach/regs-timrot.h
deleted file mode 100644
index b552795..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-timrot.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * stmp378x: TIMROT register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_TIMROT
-#define _MACH_REGS_TIMROT
-
-#define REGS_TIMROT_BASE (STMP3XXX_REGS_BASE + 0x68000)
-#define REGS_TIMROT_PHYS 0x80068000
-#define REGS_TIMROT_SIZE 0x2000
-
-#define HW_TIMROT_ROTCTRL 0x0
-#define BM_TIMROT_ROTCTRL_SELECT_A 0x00000007
-#define BP_TIMROT_ROTCTRL_SELECT_A 0
-#define BM_TIMROT_ROTCTRL_SELECT_B 0x00000070
-#define BP_TIMROT_ROTCTRL_SELECT_B 4
-#define BM_TIMROT_ROTCTRL_POLARITY_A 0x00000100
-#define BM_TIMROT_ROTCTRL_POLARITY_B 0x00000200
-#define BM_TIMROT_ROTCTRL_OVERSAMPLE 0x00000C00
-#define BP_TIMROT_ROTCTRL_OVERSAMPLE 10
-#define BM_TIMROT_ROTCTRL_RELATIVE 0x00001000
-#define BM_TIMROT_ROTCTRL_DIVIDER 0x003F0000
-#define BP_TIMROT_ROTCTRL_DIVIDER 16
-#define BM_TIMROT_ROTCTRL_ROTARY_PRESENT 0x20000000
-#define BM_TIMROT_ROTCTRL_CLKGATE 0x40000000
-#define BM_TIMROT_ROTCTRL_SFTRST 0x80000000
-
-#define HW_TIMROT_ROTCOUNT 0x10
-#define BM_TIMROT_ROTCOUNT_UPDOWN 0x0000FFFF
-#define BP_TIMROT_ROTCOUNT_UPDOWN 0
-
-#define HW_TIMROT_TIMCTRL0 (0x20 + 0 * 0x20)
-#define HW_TIMROT_TIMCTRL1 (0x20 + 1 * 0x20)
-#define HW_TIMROT_TIMCTRL2 (0x20 + 2 * 0x20)
-
-#define HW_TIMROT_TIMCTRLn 0x20
-#define BM_TIMROT_TIMCTRLn_SELECT 0x0000000F
-#define BP_TIMROT_TIMCTRLn_SELECT 0
-#define BM_TIMROT_TIMCTRLn_PRESCALE 0x00000030
-#define BP_TIMROT_TIMCTRLn_PRESCALE 4
-#define BM_TIMROT_TIMCTRLn_RELOAD 0x00000040
-#define BM_TIMROT_TIMCTRLn_UPDATE 0x00000080
-#define BM_TIMROT_TIMCTRLn_IRQ_EN 0x00004000
-#define BM_TIMROT_TIMCTRLn_IRQ 0x00008000
-
-#define HW_TIMROT_TIMCOUNT0 (0x30 + 0 * 0x20)
-#define HW_TIMROT_TIMCOUNT1 (0x30 + 1 * 0x20)
-#define HW_TIMROT_TIMCOUNT2 (0x30 + 2 * 0x20)
-
-#define HW_TIMROT_TIMCOUNTn 0x30
-
-#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h b/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h
deleted file mode 100644
index 7f895cb..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * stmp378x: TVENC register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_TVENC_BASE (STMP3XXX_REGS_BASE + 0x38000)
-#define REGS_TVENC_PHYS 0x80038000
-#define REGS_TVENC_SIZE 0x2000
-
-#define HW_TVENC_CTRL 0x0
-#define BM_TVENC_CTRL_CLKGATE 0x40000000
-#define BM_TVENC_CTRL_SFTRST 0x80000000
-
-#define HW_TVENC_CONFIG 0x10
-#define BM_TVENC_CONFIG_ENCD_MODE 0x00000007
-#define BP_TVENC_CONFIG_ENCD_MODE 0
-#define BM_TVENC_CONFIG_SYNC_MODE 0x00000070
-#define BP_TVENC_CONFIG_SYNC_MODE 4
-#define BM_TVENC_CONFIG_FSYNC_PHS 0x00000200
-#define BM_TVENC_CONFIG_CGAIN 0x0000C000
-#define BP_TVENC_CONFIG_CGAIN 14
-#define BM_TVENC_CONFIG_YGAIN_SEL 0x00030000
-#define BP_TVENC_CONFIG_YGAIN_SEL 16
-#define BM_TVENC_CONFIG_PAL_SHAPE 0x00100000
-
-#define HW_TVENC_SYNCOFFSET 0x30
-
-#define HW_TVENC_COLORSUB0 0xC0
-
-#define HW_TVENC_COLORBURST 0x140
-#define BM_TVENC_COLORBURST_PBA 0x00FF0000
-#define BP_TVENC_COLORBURST_PBA 16
-#define BM_TVENC_COLORBURST_NBA 0xFF000000
-#define BP_TVENC_COLORBURST_NBA 24
-
-#define HW_TVENC_MACROVISION0 0x150
-
-#define HW_TVENC_MACROVISION1 0x160
-
-#define HW_TVENC_MACROVISION2 0x170
-
-#define HW_TVENC_MACROVISION3 0x180
-
-#define HW_TVENC_MACROVISION4 0x190
-
-#define HW_TVENC_DACCTRL 0x1A0
-#define BM_TVENC_DACCTRL_RVAL 0x00000070
-#define BP_TVENC_DACCTRL_RVAL 4
-#define BM_TVENC_DACCTRL_DUMP_TOVDD1 0x00000100
-#define BM_TVENC_DACCTRL_PWRUP1 0x00001000
-#define BM_TVENC_DACCTRL_GAINUP 0x00040000
-#define BM_TVENC_DACCTRL_GAINDN 0x00080000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h b/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h
deleted file mode 100644
index a251e68..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * stmp378x: UARTAPP register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_UARTAPP1_BASE (STMP3XXX_REGS_BASE + 0x6C000)
-#define REGS_UARTAPP1_PHYS 0x8006C000
-#define REGS_UARTAPP2_BASE (STMP3XXX_REGS_BASE + 0x6E000)
-#define REGS_UARTAPP2_PHYS 0x8006E000
-#define REGS_UARTAPP_SIZE 0x2000
-
-#define HW_UARTAPP_CTRL0 0x0
-#define BM_UARTAPP_CTRL0_XFER_COUNT 0x0000FFFF
-#define BP_UARTAPP_CTRL0_XFER_COUNT 0
-#define BM_UARTAPP_CTRL0_RXTIMEOUT 0x07FF0000
-#define BP_UARTAPP_CTRL0_RXTIMEOUT 16
-#define BM_UARTAPP_CTRL0_RXTO_ENABLE 0x08000000
-#define BM_UARTAPP_CTRL0_RUN 0x20000000
-#define BM_UARTAPP_CTRL0_SFTRST 0x80000000
-#define BM_UARTAPP_CTRL1_XFER_COUNT 0x0000FFFF
-#define BP_UARTAPP_CTRL1_XFER_COUNT 0
-#define BM_UARTAPP_CTRL1_RUN 0x10000000
-
-#define HW_UARTAPP_CTRL2 0x20
-#define BM_UARTAPP_CTRL2_UARTEN 0x00000001
-#define BP_UARTAPP_CTRL2_UARTEN 0
-#define BM_UARTAPP_CTRL2_TXE 0x00000100
-#define BM_UARTAPP_CTRL2_RXE 0x00000200
-#define BM_UARTAPP_CTRL2_RTS 0x00000800
-#define BM_UARTAPP_CTRL2_RTSEN 0x00004000
-#define BM_UARTAPP_CTRL2_CTSEN 0x00008000
-#define BM_UARTAPP_CTRL2_RXDMAE 0x01000000
-#define BM_UARTAPP_CTRL2_TXDMAE 0x02000000
-#define BM_UARTAPP_CTRL2_DMAONERR 0x04000000
-
-#define HW_UARTAPP_LINECTRL 0x30
-#define BM_UARTAPP_LINECTRL_BRK 0x00000001
-#define BP_UARTAPP_LINECTRL_BRK 0
-#define BM_UARTAPP_LINECTRL_PEN 0x00000002
-#define BM_UARTAPP_LINECTRL_EPS 0x00000004
-#define BM_UARTAPP_LINECTRL_STP2 0x00000008
-#define BM_UARTAPP_LINECTRL_FEN 0x00000010
-#define BM_UARTAPP_LINECTRL_WLEN 0x00000060
-#define BP_UARTAPP_LINECTRL_WLEN 5
-#define BM_UARTAPP_LINECTRL_SPS 0x00000080
-#define BM_UARTAPP_LINECTRL_BAUD_DIVFRAC 0x00003F00
-#define BP_UARTAPP_LINECTRL_BAUD_DIVFRAC 8
-#define BM_UARTAPP_LINECTRL_BAUD_DIVINT 0xFFFF0000
-#define BP_UARTAPP_LINECTRL_BAUD_DIVINT 16
-
-#define HW_UARTAPP_INTR 0x50
-#define BM_UARTAPP_INTR_CTSMIS 0x00000002
-#define BM_UARTAPP_INTR_RTIS 0x00000040
-#define BM_UARTAPP_INTR_CTSMIEN 0x00020000
-#define BM_UARTAPP_INTR_RXIEN 0x00100000
-#define BM_UARTAPP_INTR_RTIEN 0x00400000
-
-#define HW_UARTAPP_DATA 0x60
-
-#define HW_UARTAPP_STAT 0x70
-#define BM_UARTAPP_STAT_RXCOUNT 0x0000FFFF
-#define BP_UARTAPP_STAT_RXCOUNT 0
-#define BM_UARTAPP_STAT_FERR 0x00010000
-#define BM_UARTAPP_STAT_PERR 0x00020000
-#define BM_UARTAPP_STAT_BERR 0x00040000
-#define BM_UARTAPP_STAT_OERR 0x00080000
-#define BM_UARTAPP_STAT_RXFE 0x01000000
-#define BM_UARTAPP_STAT_TXFF 0x02000000
-#define BM_UARTAPP_STAT_TXFE 0x08000000
-#define BM_UARTAPP_STAT_CTS 0x10000000
-
-#define HW_UARTAPP_VERSION 0x90
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h b/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h
deleted file mode 100644
index b810deb..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * stmp378x: UARTDBG register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_UARTDBG_BASE (STMP3XXX_REGS_BASE + 0x70000)
-#define REGS_UARTDBG_PHYS 0x80070000
-#define REGS_UARTDBG_SIZE 0x2000
-
-#define HW_UARTDBGDR 0x00000000
-#define BP_UARTDBGDR_UNAVAILABLE 16
-#define BM_UARTDBGDR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGDR_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGDR_UNAVAILABLE)
-#define BP_UARTDBGDR_RESERVED 12
-#define BM_UARTDBGDR_RESERVED 0x0000F000
-#define BF_UARTDBGDR_RESERVED(v) \
- (((v) << 12) & BM_UARTDBGDR_RESERVED)
-#define BM_UARTDBGDR_OE 0x00000800
-#define BM_UARTDBGDR_BE 0x00000400
-#define BM_UARTDBGDR_PE 0x00000200
-#define BM_UARTDBGDR_FE 0x00000100
-#define BP_UARTDBGDR_DATA 0
-#define BM_UARTDBGDR_DATA 0x000000FF
-#define BF_UARTDBGDR_DATA(v) \
- (((v) << 0) & BM_UARTDBGDR_DATA)
-#define HW_UARTDBGRSR_ECR 0x00000004
-#define BP_UARTDBGRSR_ECR_UNAVAILABLE 8
-#define BM_UARTDBGRSR_ECR_UNAVAILABLE 0xFFFFFF00
-#define BF_UARTDBGRSR_ECR_UNAVAILABLE(v) \
- (((v) << 8) & BM_UARTDBGRSR_ECR_UNAVAILABLE)
-#define BP_UARTDBGRSR_ECR_EC 4
-#define BM_UARTDBGRSR_ECR_EC 0x000000F0
-#define BF_UARTDBGRSR_ECR_EC(v) \
- (((v) << 4) & BM_UARTDBGRSR_ECR_EC)
-#define BM_UARTDBGRSR_ECR_OE 0x00000008
-#define BM_UARTDBGRSR_ECR_BE 0x00000004
-#define BM_UARTDBGRSR_ECR_PE 0x00000002
-#define BM_UARTDBGRSR_ECR_FE 0x00000001
-#define HW_UARTDBGFR 0x00000018
-#define BP_UARTDBGFR_UNAVAILABLE 16
-#define BM_UARTDBGFR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGFR_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGFR_UNAVAILABLE)
-#define BP_UARTDBGFR_RESERVED 9
-#define BM_UARTDBGFR_RESERVED 0x0000FE00
-#define BF_UARTDBGFR_RESERVED(v) \
- (((v) << 9) & BM_UARTDBGFR_RESERVED)
-#define BM_UARTDBGFR_RI 0x00000100
-#define BM_UARTDBGFR_TXFE 0x00000080
-#define BM_UARTDBGFR_RXFF 0x00000040
-#define BM_UARTDBGFR_TXFF 0x00000020
-#define BM_UARTDBGFR_RXFE 0x00000010
-#define BM_UARTDBGFR_BUSY 0x00000008
-#define BM_UARTDBGFR_DCD 0x00000004
-#define BM_UARTDBGFR_DSR 0x00000002
-#define BM_UARTDBGFR_CTS 0x00000001
-#define HW_UARTDBGILPR 0x00000020
-#define BP_UARTDBGILPR_UNAVAILABLE 8
-#define BM_UARTDBGILPR_UNAVAILABLE 0xFFFFFF00
-#define BF_UARTDBGILPR_UNAVAILABLE(v) \
- (((v) << 8) & BM_UARTDBGILPR_UNAVAILABLE)
-#define BP_UARTDBGILPR_ILPDVSR 0
-#define BM_UARTDBGILPR_ILPDVSR 0x000000FF
-#define BF_UARTDBGILPR_ILPDVSR(v) \
- (((v) << 0) & BM_UARTDBGILPR_ILPDVSR)
-#define HW_UARTDBGIBRD 0x00000024
-#define BP_UARTDBGIBRD_UNAVAILABLE 16
-#define BM_UARTDBGIBRD_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGIBRD_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGIBRD_UNAVAILABLE)
-#define BP_UARTDBGIBRD_BAUD_DIVINT 0
-#define BM_UARTDBGIBRD_BAUD_DIVINT 0x0000FFFF
-#define BF_UARTDBGIBRD_BAUD_DIVINT(v) \
- (((v) << 0) & BM_UARTDBGIBRD_BAUD_DIVINT)
-#define HW_UARTDBGFBRD 0x00000028
-#define BP_UARTDBGFBRD_UNAVAILABLE 8
-#define BM_UARTDBGFBRD_UNAVAILABLE 0xFFFFFF00
-#define BF_UARTDBGFBRD_UNAVAILABLE(v) \
- (((v) << 8) & BM_UARTDBGFBRD_UNAVAILABLE)
-#define BP_UARTDBGFBRD_RESERVED 6
-#define BM_UARTDBGFBRD_RESERVED 0x000000C0
-#define BF_UARTDBGFBRD_RESERVED(v) \
- (((v) << 6) & BM_UARTDBGFBRD_RESERVED)
-#define BP_UARTDBGFBRD_BAUD_DIVFRAC 0
-#define BM_UARTDBGFBRD_BAUD_DIVFRAC 0x0000003F
-#define BF_UARTDBGFBRD_BAUD_DIVFRAC(v) \
- (((v) << 0) & BM_UARTDBGFBRD_BAUD_DIVFRAC)
-#define HW_UARTDBGLCR_H 0x0000002c
-#define BP_UARTDBGLCR_H_UNAVAILABLE 16
-#define BM_UARTDBGLCR_H_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGLCR_H_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGLCR_H_UNAVAILABLE)
-#define BP_UARTDBGLCR_H_RESERVED 8
-#define BM_UARTDBGLCR_H_RESERVED 0x0000FF00
-#define BF_UARTDBGLCR_H_RESERVED(v) \
- (((v) << 8) & BM_UARTDBGLCR_H_RESERVED)
-#define BM_UARTDBGLCR_H_SPS 0x00000080
-#define BP_UARTDBGLCR_H_WLEN 5
-#define BM_UARTDBGLCR_H_WLEN 0x00000060
-#define BF_UARTDBGLCR_H_WLEN(v) \
- (((v) << 5) & BM_UARTDBGLCR_H_WLEN)
-#define BM_UARTDBGLCR_H_FEN 0x00000010
-#define BM_UARTDBGLCR_H_STP2 0x00000008
-#define BM_UARTDBGLCR_H_EPS 0x00000004
-#define BM_UARTDBGLCR_H_PEN 0x00000002
-#define BM_UARTDBGLCR_H_BRK 0x00000001
-#define HW_UARTDBGCR 0x00000030
-#define BP_UARTDBGCR_UNAVAILABLE 16
-#define BM_UARTDBGCR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGCR_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGCR_UNAVAILABLE)
-#define BM_UARTDBGCR_CTSEN 0x00008000
-#define BM_UARTDBGCR_RTSEN 0x00004000
-#define BM_UARTDBGCR_OUT2 0x00002000
-#define BM_UARTDBGCR_OUT1 0x00001000
-#define BM_UARTDBGCR_RTS 0x00000800
-#define BM_UARTDBGCR_DTR 0x00000400
-#define BM_UARTDBGCR_RXE 0x00000200
-#define BM_UARTDBGCR_TXE 0x00000100
-#define BM_UARTDBGCR_LBE 0x00000080
-#define BP_UARTDBGCR_RESERVED 3
-#define BM_UARTDBGCR_RESERVED 0x00000078
-#define BF_UARTDBGCR_RESERVED(v) \
- (((v) << 3) & BM_UARTDBGCR_RESERVED)
-#define BM_UARTDBGCR_SIRLP 0x00000004
-#define BM_UARTDBGCR_SIREN 0x00000002
-#define BM_UARTDBGCR_UARTEN 0x00000001
-#define HW_UARTDBGIFLS 0x00000034
-#define BP_UARTDBGIFLS_UNAVAILABLE 16
-#define BM_UARTDBGIFLS_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGIFLS_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGIFLS_UNAVAILABLE)
-#define BP_UARTDBGIFLS_RESERVED 6
-#define BM_UARTDBGIFLS_RESERVED 0x0000FFC0
-#define BF_UARTDBGIFLS_RESERVED(v) \
- (((v) << 6) & BM_UARTDBGIFLS_RESERVED)
-#define BP_UARTDBGIFLS_RXIFLSEL 3
-#define BM_UARTDBGIFLS_RXIFLSEL 0x00000038
-#define BF_UARTDBGIFLS_RXIFLSEL(v) \
- (((v) << 3) & BM_UARTDBGIFLS_RXIFLSEL)
-#define BV_UARTDBGIFLS_RXIFLSEL__NOT_EMPTY 0x0
-#define BV_UARTDBGIFLS_RXIFLSEL__ONE_QUARTER 0x1
-#define BV_UARTDBGIFLS_RXIFLSEL__ONE_HALF 0x2
-#define BV_UARTDBGIFLS_RXIFLSEL__THREE_QUARTERS 0x3
-#define BV_UARTDBGIFLS_RXIFLSEL__SEVEN_EIGHTHS 0x4
-#define BV_UARTDBGIFLS_RXIFLSEL__INVALID5 0x5
-#define BV_UARTDBGIFLS_RXIFLSEL__INVALID6 0x6
-#define BV_UARTDBGIFLS_RXIFLSEL__INVALID7 0x7
-#define BP_UARTDBGIFLS_TXIFLSEL 0
-#define BM_UARTDBGIFLS_TXIFLSEL 0x00000007
-#define BF_UARTDBGIFLS_TXIFLSEL(v) \
- (((v) << 0) & BM_UARTDBGIFLS_TXIFLSEL)
-#define BV_UARTDBGIFLS_TXIFLSEL__EMPTY 0x0
-#define BV_UARTDBGIFLS_TXIFLSEL__ONE_QUARTER 0x1
-#define BV_UARTDBGIFLS_TXIFLSEL__ONE_HALF 0x2
-#define BV_UARTDBGIFLS_TXIFLSEL__THREE_QUARTERS 0x3
-#define BV_UARTDBGIFLS_TXIFLSEL__SEVEN_EIGHTHS 0x4
-#define BV_UARTDBGIFLS_TXIFLSEL__INVALID5 0x5
-#define BV_UARTDBGIFLS_TXIFLSEL__INVALID6 0x6
-#define BV_UARTDBGIFLS_TXIFLSEL__INVALID7 0x7
-#define HW_UARTDBGIMSC 0x00000038
-#define BP_UARTDBGIMSC_UNAVAILABLE 16
-#define BM_UARTDBGIMSC_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGIMSC_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGIMSC_UNAVAILABLE)
-#define BP_UARTDBGIMSC_RESERVED 11
-#define BM_UARTDBGIMSC_RESERVED 0x0000F800
-#define BF_UARTDBGIMSC_RESERVED(v) \
- (((v) << 11) & BM_UARTDBGIMSC_RESERVED)
-#define BM_UARTDBGIMSC_OEIM 0x00000400
-#define BM_UARTDBGIMSC_BEIM 0x00000200
-#define BM_UARTDBGIMSC_PEIM 0x00000100
-#define BM_UARTDBGIMSC_FEIM 0x00000080
-#define BM_UARTDBGIMSC_RTIM 0x00000040
-#define BM_UARTDBGIMSC_TXIM 0x00000020
-#define BM_UARTDBGIMSC_RXIM 0x00000010
-#define BM_UARTDBGIMSC_DSRMIM 0x00000008
-#define BM_UARTDBGIMSC_DCDMIM 0x00000004
-#define BM_UARTDBGIMSC_CTSMIM 0x00000002
-#define BM_UARTDBGIMSC_RIMIM 0x00000001
-#define HW_UARTDBGRIS 0x0000003c
-#define BP_UARTDBGRIS_UNAVAILABLE 16
-#define BM_UARTDBGRIS_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGRIS_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGRIS_UNAVAILABLE)
-#define BP_UARTDBGRIS_RESERVED 11
-#define BM_UARTDBGRIS_RESERVED 0x0000F800
-#define BF_UARTDBGRIS_RESERVED(v) \
- (((v) << 11) & BM_UARTDBGRIS_RESERVED)
-#define BM_UARTDBGRIS_OERIS 0x00000400
-#define BM_UARTDBGRIS_BERIS 0x00000200
-#define BM_UARTDBGRIS_PERIS 0x00000100
-#define BM_UARTDBGRIS_FERIS 0x00000080
-#define BM_UARTDBGRIS_RTRIS 0x00000040
-#define BM_UARTDBGRIS_TXRIS 0x00000020
-#define BM_UARTDBGRIS_RXRIS 0x00000010
-#define BM_UARTDBGRIS_DSRRMIS 0x00000008
-#define BM_UARTDBGRIS_DCDRMIS 0x00000004
-#define BM_UARTDBGRIS_CTSRMIS 0x00000002
-#define BM_UARTDBGRIS_RIRMIS 0x00000001
-#define HW_UARTDBGMIS 0x00000040
-#define BP_UARTDBGMIS_UNAVAILABLE 16
-#define BM_UARTDBGMIS_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGMIS_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGMIS_UNAVAILABLE)
-#define BP_UARTDBGMIS_RESERVED 11
-#define BM_UARTDBGMIS_RESERVED 0x0000F800
-#define BF_UARTDBGMIS_RESERVED(v) \
- (((v) << 11) & BM_UARTDBGMIS_RESERVED)
-#define BM_UARTDBGMIS_OEMIS 0x00000400
-#define BM_UARTDBGMIS_BEMIS 0x00000200
-#define BM_UARTDBGMIS_PEMIS 0x00000100
-#define BM_UARTDBGMIS_FEMIS 0x00000080
-#define BM_UARTDBGMIS_RTMIS 0x00000040
-#define BM_UARTDBGMIS_TXMIS 0x00000020
-#define BM_UARTDBGMIS_RXMIS 0x00000010
-#define BM_UARTDBGMIS_DSRMMIS 0x00000008
-#define BM_UARTDBGMIS_DCDMMIS 0x00000004
-#define BM_UARTDBGMIS_CTSMMIS 0x00000002
-#define BM_UARTDBGMIS_RIMMIS 0x00000001
-#define HW_UARTDBGICR 0x00000044
-#define BP_UARTDBGICR_UNAVAILABLE 16
-#define BM_UARTDBGICR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGICR_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGICR_UNAVAILABLE)
-#define BP_UARTDBGICR_RESERVED 11
-#define BM_UARTDBGICR_RESERVED 0x0000F800
-#define BF_UARTDBGICR_RESERVED(v) \
- (((v) << 11) & BM_UARTDBGICR_RESERVED)
-#define BM_UARTDBGICR_OEIC 0x00000400
-#define BM_UARTDBGICR_BEIC 0x00000200
-#define BM_UARTDBGICR_PEIC 0x00000100
-#define BM_UARTDBGICR_FEIC 0x00000080
-#define BM_UARTDBGICR_RTIC 0x00000040
-#define BM_UARTDBGICR_TXIC 0x00000020
-#define BM_UARTDBGICR_RXIC 0x00000010
-#define BM_UARTDBGICR_DSRMIC 0x00000008
-#define BM_UARTDBGICR_DCDMIC 0x00000004
-#define BM_UARTDBGICR_CTSMIC 0x00000002
-#define BM_UARTDBGICR_RIMIC 0x00000001
-#define HW_UARTDBGDMACR 0x00000048
-#define BP_UARTDBGDMACR_UNAVAILABLE 16
-#define BM_UARTDBGDMACR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGDMACR_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGDMACR_UNAVAILABLE)
-#define BP_UARTDBGDMACR_RESERVED 3
-#define BM_UARTDBGDMACR_RESERVED 0x0000FFF8
-#define BF_UARTDBGDMACR_RESERVED(v) \
- (((v) << 3) & BM_UARTDBGDMACR_RESERVED)
-#define BM_UARTDBGDMACR_DMAONERR 0x00000004
-#define BM_UARTDBGDMACR_TXDMAE 0x00000002
-#define BM_UARTDBGDMACR_RXDMAE 0x00000001
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h
deleted file mode 100644
index 25112c1..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * stmp378x: USBCTRL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_USBCTRL_BASE (STMP3XXX_REGS_BASE + 0x80000)
-#define REGS_USBCTRL_PHYS 0x80080000
-#define REGS_USBCTRL_SIZE 0x2000
-
-#define HW_USBCTRL_USBCMD 0x140
-#define BM_USBCTRL_USBCMD_RS 0x00000001
-#define BP_USBCTRL_USBCMD_RS 0
-#define BM_USBCTRL_USBCMD_RST 0x00000002
-
-#define HW_USBCTRL_USBINTR 0x148
-#define BM_USBCTRL_USBINTR_UE 0x00000001
-#define BP_USBCTRL_USBINTR_UE 0
-
-#define HW_USBCTRL_PORTSC1 0x184
-#define BM_USBCTRL_PORTSC1_PHCD 0x00800000
-
-#define HW_USBCTRL_OTGSC 0x1A4
-#define BM_USBCTRL_OTGSC_ID 0x00000100
-#define BM_USBCTRL_OTGSC_IDIS 0x00010000
-#define BM_USBCTRL_OTGSC_IDIE 0x01000000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h b/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h
deleted file mode 100644
index 11f3b73..0000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * stmp378x: USBPHY register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_USBPHY_BASE (STMP3XXX_REGS_BASE + 0x7C000)
-#define REGS_USBPHY_PHYS 0x8007C000
-#define REGS_USBPHY_SIZE 0x2000
-
-#define HW_USBPHY_PWD 0x0
-
-#define HW_USBPHY_CTRL 0x30
-#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT 0x00000002
-#define BM_USBPHY_CTRL_ENDEVPLUGINDETECT 0x00000010
-#define BM_USBPHY_CTRL_ENOTGIDDETECT 0x00000080
-#define BM_USBPHY_CTRL_ENIRQDEVPLUGIN 0x00000800
-#define BM_USBPHY_CTRL_CLKGATE 0x40000000
-#define BM_USBPHY_CTRL_SFTRST 0x80000000
-
-#define HW_USBPHY_STATUS 0x40
-#define BM_USBPHY_STATUS_DEVPLUGIN_STATUS 0x00000040
-#define BM_USBPHY_STATUS_OTGID_STATUS 0x00000100
diff --git a/arch/arm/mach-stmp378x/stmp378x.c b/arch/arm/mach-stmp378x/stmp378x.c
deleted file mode 100644
index c2f9fe0..0000000
--- a/arch/arm/mach-stmp378x/stmp378x.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * Freescale STMP378X platform support
- *
- * Embedded Alley Solutions, Inc <source at embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/dma.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/pins.h>
-#include <mach/pinmux.h>
-#include <mach/dma.h>
-#include <mach/hardware.h>
-#include <mach/system.h>
-#include <mach/platform.h>
-#include <mach/stmp3xxx.h>
-#include <mach/regs-icoll.h>
-#include <mach/regs-apbh.h>
-#include <mach/regs-apbx.h>
-#include <mach/regs-pxp.h>
-#include <mach/regs-i2c.h>
-
-#include "stmp378x.h"
-/*
- * IRQ handling
- */
-static void stmp378x_ack_irq(struct irq_data *d)
-{
- /* Tell ICOLL to release IRQ line */
- __raw_writel(0, REGS_ICOLL_BASE + HW_ICOLL_VECTOR);
-
- /* ACK current interrupt */
- __raw_writel(0x01 /* BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 */,
- REGS_ICOLL_BASE + HW_ICOLL_LEVELACK);
-
- /* Barrier */
- (void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT);
-}
-
-static void stmp378x_mask_irq(struct irq_data *d)
-{
- /* IRQ disable */
- stmp3xxx_clearl(BM_ICOLL_INTERRUPTn_ENABLE,
- REGS_ICOLL_BASE + HW_ICOLL_INTERRUPTn + d->irq * 0x10);
-}
-
-static void stmp378x_unmask_irq(struct irq_data *d)
-{
- /* IRQ enable */
- stmp3xxx_setl(BM_ICOLL_INTERRUPTn_ENABLE,
- REGS_ICOLL_BASE + HW_ICOLL_INTERRUPTn + d->irq * 0x10);
-}
-
-static struct irq_chip stmp378x_chip = {
- .irq_ack = stmp378x_ack_irq,
- .irq_mask = stmp378x_mask_irq,
- .irq_unmask = stmp378x_unmask_irq,
-};
-
-void __init stmp378x_init_irq(void)
-{
- stmp3xxx_init_irq(&stmp378x_chip);
-}
-
-/*
- * DMA interrupt handling
- */
-void stmp3xxx_arch_dma_enable_interrupt(int channel)
-{
- void __iomem *c1, *c2;
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- c1 = REGS_APBH_BASE + HW_APBH_CTRL1;
- c2 = REGS_APBH_BASE + HW_APBH_CTRL2;
- break;
-
- case STMP3XXX_BUS_APBX:
- c1 = REGS_APBX_BASE + HW_APBX_CTRL1;
- c2 = REGS_APBX_BASE + HW_APBX_CTRL2;
- break;
-
- default:
- return;
- }
- stmp3xxx_setl(1 << (16 + STMP3XXX_DMA_CHANNEL(channel)), c1);
- stmp3xxx_setl(1 << (16 + STMP3XXX_DMA_CHANNEL(channel)), c2);
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_enable_interrupt);
-
-void stmp3xxx_arch_dma_clear_interrupt(int channel)
-{
- void __iomem *c1, *c2;
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- c1 = REGS_APBH_BASE + HW_APBH_CTRL1;
- c2 = REGS_APBH_BASE + HW_APBH_CTRL2;
- break;
-
- case STMP3XXX_BUS_APBX:
- c1 = REGS_APBX_BASE + HW_APBX_CTRL1;
- c2 = REGS_APBX_BASE + HW_APBX_CTRL2;
- break;
-
- default:
- return;
- }
- stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), c1);
- stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), c2);
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_clear_interrupt);
-
-int stmp3xxx_arch_dma_is_interrupt(int channel)
-{
- int r = 0;
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) &
- (1 << STMP3XXX_DMA_CHANNEL(channel));
- break;
-
- case STMP3XXX_BUS_APBX:
- r = __raw_readl(REGS_APBX_BASE + HW_APBX_CTRL1) &
- (1 << STMP3XXX_DMA_CHANNEL(channel));
- break;
- }
- return r;
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_is_interrupt);
-
-void stmp3xxx_arch_dma_reset_channel(int channel)
-{
- unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
- void __iomem *c0;
- u32 mask;
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- c0 = REGS_APBH_BASE + HW_APBH_CTRL0;
- mask = chbit << BP_APBH_CTRL0_RESET_CHANNEL;
- break;
- case STMP3XXX_BUS_APBX:
- c0 = REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL;
- mask = chbit << BP_APBX_CHANNEL_CTRL_RESET_CHANNEL;
- break;
- default:
- return;
- }
-
- /* Reset channel and wait for it to complete */
- stmp3xxx_setl(mask, c0);
- while (__raw_readl(c0) & mask)
- cpu_relax();
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_reset_channel);
-
-void stmp3xxx_arch_dma_freeze(int channel)
-{
- unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
- u32 mask = 1 << chbit;
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- stmp3xxx_setl(mask, REGS_APBH_BASE + HW_APBH_CTRL0);
- break;
- case STMP3XXX_BUS_APBX:
- stmp3xxx_setl(mask, REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL);
- break;
- }
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_freeze);
-
-void stmp3xxx_arch_dma_unfreeze(int channel)
-{
- unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
- u32 mask = 1 << chbit;
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- stmp3xxx_clearl(mask, REGS_APBH_BASE + HW_APBH_CTRL0);
- break;
- case STMP3XXX_BUS_APBX:
- stmp3xxx_clearl(mask, REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL);
- break;
- }
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_unfreeze);
-
-/*
- * The registers are all very closely mapped, so we might as well map them all
- * with a single mapping
- *
- * Logical Physical
- * f0000000 80000000 On-chip registers
- * f1000000 00000000 32k on-chip SRAM
- */
-
-static struct map_desc stmp378x_io_desc[] __initdata = {
- {
- .virtual = (u32)STMP3XXX_REGS_BASE,
- .pfn = __phys_to_pfn(STMP3XXX_REGS_PHBASE),
- .length = STMP3XXX_REGS_SIZE,
- .type = MT_DEVICE,
- },
- {
- .virtual = (u32)STMP3XXX_OCRAM_BASE,
- .pfn = __phys_to_pfn(STMP3XXX_OCRAM_PHBASE),
- .length = STMP3XXX_OCRAM_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-
-static u64 common_dmamask = DMA_BIT_MASK(32);
-
-/*
- * devices that are present only on stmp378x, not on all 3xxx boards:
- * PxP
- * I2C
- */
-static struct resource pxp_resource[] = {
- {
- .flags = IORESOURCE_MEM,
- .start = REGS_PXP_PHYS,
- .end = REGS_PXP_PHYS + REGS_PXP_SIZE,
- }, {
- .flags = IORESOURCE_IRQ,
- .start = IRQ_PXP,
- .end = IRQ_PXP,
- },
-};
-
-struct platform_device stmp378x_pxp = {
- .name = "stmp3xxx-pxp",
- .id = -1,
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(pxp_resource),
- .resource = pxp_resource,
-};
-
-static struct resource i2c_resources[] = {
- {
- .flags = IORESOURCE_IRQ,
- .start = IRQ_I2C_ERROR,
- .end = IRQ_I2C_ERROR,
- }, {
- .flags = IORESOURCE_MEM,
- .start = REGS_I2C_PHYS,
- .end = REGS_I2C_PHYS + REGS_I2C_SIZE,
- }, {
- .flags = IORESOURCE_DMA,
- .start = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX),
- .end = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX),
- },
-};
-
-struct platform_device stmp378x_i2c = {
- .name = "i2c_stmp3xxx",
- .id = 0,
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = i2c_resources,
- .num_resources = ARRAY_SIZE(i2c_resources),
-};
-
-void __init stmp378x_map_io(void)
-{
- iotable_init(stmp378x_io_desc, ARRAY_SIZE(stmp378x_io_desc));
-}
diff --git a/arch/arm/mach-stmp378x/stmp378x.h b/arch/arm/mach-stmp378x/stmp378x.h
deleted file mode 100644
index 0dc15b3..0000000
--- a/arch/arm/mach-stmp378x/stmp378x.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Freescale STMP37XX/STMP378X internal functions and data declarations
- *
- * Embedded Alley Solutions, Inc <source at embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __MACH_STMP378X_H
-#define __MACH_STMP378X_H
-
-void stmp378x_map_io(void);
-void stmp378x_init_irq(void);
-
-extern struct platform_device stmp378x_pxp, stmp378x_i2c;
-#endif /* __MACH_STMP378X_COMMON_H */
diff --git a/arch/arm/mach-stmp378x/stmp378x_devb.c b/arch/arm/mach-stmp378x/stmp378x_devb.c
deleted file mode 100644
index 0615884..0000000
--- a/arch/arm/mach-stmp378x/stmp378x_devb.c
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- * Freescale STMP378X development board support
- *
- * Embedded Alley Solutions, Inc <source at embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/spi/spi.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pins.h>
-#include <mach/pinmux.h>
-#include <mach/platform.h>
-#include <mach/stmp3xxx.h>
-#include <mach/mmc.h>
-#include <mach/gpmi.h>
-
-#include "stmp378x.h"
-
-static struct platform_device *devices[] = {
- &stmp3xxx_dbguart,
- &stmp3xxx_appuart,
- &stmp3xxx_watchdog,
- &stmp3xxx_touchscreen,
- &stmp3xxx_rtc,
- &stmp3xxx_keyboard,
- &stmp3xxx_framebuffer,
- &stmp3xxx_backlight,
- &stmp3xxx_rotdec,
- &stmp3xxx_persistent,
- &stmp3xxx_dcp_bootstream,
- &stmp3xxx_dcp,
- &stmp3xxx_battery,
- &stmp378x_pxp,
- &stmp378x_i2c,
-};
-
-static struct pin_desc i2c_pins_desc[] = {
- { PINID_I2C_SCL, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_I2C_SDA, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
-};
-
-static struct pin_group i2c_pins = {
- .pins = i2c_pins_desc,
- .nr_pins = ARRAY_SIZE(i2c_pins_desc),
-};
-
-static struct pin_desc dbguart_pins_0[] = {
- { PINID_PWM0, PIN_FUN3, },
- { PINID_PWM1, PIN_FUN3, },
-};
-
-static struct pin_group dbguart_pins[] = {
- [0] = {
- .pins = dbguart_pins_0,
- .nr_pins = ARRAY_SIZE(dbguart_pins_0),
- },
-};
-
-static int dbguart_pins_control(int id, int request)
-{
- int r = 0;
-
- if (request)
- r = stmp3xxx_request_pin_group(&dbguart_pins[id], "debug uart");
- else
- stmp3xxx_release_pin_group(&dbguart_pins[id], "debug uart");
- return r;
-}
-
-static struct pin_desc appuart_pins_0[] = {
- { PINID_AUART1_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
- { PINID_AUART1_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
- { PINID_AUART1_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
- { PINID_AUART1_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
-};
-
-static struct pin_desc appuart_pins_1[] = {
-#if 0 /* enable these when second appuart will be connected */
- { PINID_AUART2_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
- { PINID_AUART2_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
- { PINID_AUART2_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
- { PINID_AUART2_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
-#endif
-};
-
-static struct pin_desc mmc_pins_desc[] = {
- { PINID_SSP1_DATA0, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
- { PINID_SSP1_DATA1, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
- { PINID_SSP1_DATA2, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
- { PINID_SSP1_DATA3, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
- { PINID_SSP1_CMD, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
- { PINID_SSP1_SCK, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 },
- { PINID_SSP1_DETECT, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 },
-};
-
-static struct pin_group mmc_pins = {
- .pins = mmc_pins_desc,
- .nr_pins = ARRAY_SIZE(mmc_pins_desc),
-};
-
-static int stmp3xxxmmc_get_wp(void)
-{
- return gpio_get_value(PINID_PWM4);
-}
-
-static int stmp3xxxmmc_hw_init_ssp1(void)
-{
- int ret;
-
- ret = stmp3xxx_request_pin_group(&mmc_pins, "mmc");
- if (ret)
- goto out;
-
- /* Configure write protect GPIO pin */
- ret = gpio_request(PINID_PWM4, "mmc wp");
- if (ret)
- goto out_wp;
-
- gpio_direction_input(PINID_PWM4);
-
- /* Configure POWER pin as gpio to drive power to MMC slot */
- ret = gpio_request(PINID_PWM3, "mmc power");
- if (ret)
- goto out_power;
-
- gpio_direction_output(PINID_PWM3, 0);
- mdelay(100);
-
- return 0;
-
-out_power:
- gpio_free(PINID_PWM4);
-out_wp:
- stmp3xxx_release_pin_group(&mmc_pins, "mmc");
-out:
- return ret;
-}
-
-static void stmp3xxxmmc_hw_release_ssp1(void)
-{
- gpio_free(PINID_PWM3);
- gpio_free(PINID_PWM4);
- stmp3xxx_release_pin_group(&mmc_pins, "mmc");
-}
-
-static void stmp3xxxmmc_cmd_pullup_ssp1(int enable)
-{
- stmp3xxx_pin_pullup(PINID_SSP1_CMD, enable, "mmc");
-}
-
-static unsigned long
-stmp3xxxmmc_setclock_ssp1(void __iomem *base, unsigned long hz)
-{
- struct clk *ssp, *parent;
- char *p;
- long r;
-
- ssp = clk_get(NULL, "ssp");
-
- /* using SSP1, no timeout, clock rate 1 */
- writel(BF(2, SSP_TIMING_CLOCK_DIVIDE) |
- BF(0xFFFF, SSP_TIMING_TIMEOUT),
- base + HW_SSP_TIMING);
-
- p = (hz > 1000000) ? "io" : "osc_24M";
- parent = clk_get(NULL, p);
- clk_set_parent(ssp, parent);
- r = clk_set_rate(ssp, 2 * hz / 1000);
- clk_put(parent);
- clk_put(ssp);
-
- return hz;
-}
-
-static struct stmp3xxxmmc_platform_data mmc_data = {
- .hw_init = stmp3xxxmmc_hw_init_ssp1,
- .hw_release = stmp3xxxmmc_hw_release_ssp1,
- .get_wp = stmp3xxxmmc_get_wp,
- .cmd_pullup = stmp3xxxmmc_cmd_pullup_ssp1,
- .setclock = stmp3xxxmmc_setclock_ssp1,
-};
-
-
-static struct pin_group appuart_pins[] = {
- [0] = {
- .pins = appuart_pins_0,
- .nr_pins = ARRAY_SIZE(appuart_pins_0),
- },
- [1] = {
- .pins = appuart_pins_1,
- .nr_pins = ARRAY_SIZE(appuart_pins_1),
- },
-};
-
-static struct pin_desc ssp1_pins_desc[] = {
- { PINID_SSP1_SCK, PIN_FUN1, PIN_8MA, PIN_3_3V, 0, },
- { PINID_SSP1_CMD, PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
- { PINID_SSP1_DATA0, PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
- { PINID_SSP1_DATA3, PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
-};
-
-static struct pin_desc ssp2_pins_desc[] = {
- { PINID_GPMI_WRN, PIN_FUN3, PIN_8MA, PIN_3_3V, 0, },
- { PINID_GPMI_RDY1, PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
- { PINID_GPMI_D00, PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
- { PINID_GPMI_D03, PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
-};
-
-static struct pin_group ssp1_pins = {
- .pins = ssp1_pins_desc,
- .nr_pins = ARRAY_SIZE(ssp1_pins_desc),
-};
-
-static struct pin_group ssp2_pins = {
- .pins = ssp1_pins_desc,
- .nr_pins = ARRAY_SIZE(ssp2_pins_desc),
-};
-
-static struct pin_desc gpmi_pins_desc[] = {
- { PINID_GPMI_CE0N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_CE1N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GMPI_CE2N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_CLE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_ALE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_WPN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
- { PINID_GPMI_RDY1, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_D00, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_D01, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_D02, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_D03, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_D04, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_D05, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_D06, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_D07, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_RDY0, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_RDY2, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_RDY3, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_WRN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
- { PINID_GPMI_RDN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
-};
-
-static struct pin_group gpmi_pins = {
- .pins = gpmi_pins_desc,
- .nr_pins = ARRAY_SIZE(gpmi_pins_desc),
-};
-
-static struct mtd_partition gpmi_partitions[] = {
- [0] = {
- .name = "boot",
- .size = 10 * SZ_1M,
- .offset = 0,
- },
- [1] = {
- .name = "data",
- .size = MTDPART_SIZ_FULL,
- .offset = MTDPART_OFS_APPEND,
- },
-};
-
-static struct gpmi_platform_data gpmi_data = {
- .pins = &gpmi_pins,
- .nr_parts = ARRAY_SIZE(gpmi_partitions),
- .parts = gpmi_partitions,
- .part_types = { "cmdline", NULL },
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
- {
- .modalias = "enc28j60",
- .max_speed_hz = 6 * 1000 * 1000,
- .bus_num = 1,
- .chip_select = 0,
- .platform_data = NULL,
- },
-#endif
-};
-
-static void __init stmp378x_devb_init(void)
-{
- stmp3xxx_pinmux_init(NR_REAL_IRQS);
-
- /* init stmp3xxx platform */
- stmp3xxx_init();
-
- stmp3xxx_dbguart.dev.platform_data = dbguart_pins_control;
- stmp3xxx_appuart.dev.platform_data = appuart_pins;
- stmp3xxx_mmc.dev.platform_data = &mmc_data;
- stmp3xxx_gpmi.dev.platform_data = &gpmi_data;
- stmp3xxx_spi1.dev.platform_data = &ssp1_pins;
- stmp3xxx_spi2.dev.platform_data = &ssp2_pins;
- stmp378x_i2c.dev.platform_data = &i2c_pins;
-
- /* register spi devices */
- spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
- /* add board's devices */
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- /* add devices selected by command line ssp1= and ssp2= options */
- stmp3xxx_ssp1_device_register();
- stmp3xxx_ssp2_device_register();
-}
-
-MACHINE_START(STMP378X, "STMP378X")
- .boot_params = 0x40000100,
- .map_io = stmp378x_map_io,
- .init_irq = stmp378x_init_irq,
- .timer = &stmp3xxx_timer,
- .init_machine = stmp378x_devb_init,
-MACHINE_END
diff --git a/arch/arm/plat-stmp3xxx/Kconfig b/arch/arm/plat-stmp3xxx/Kconfig
index dcdbe32..e6e312b 100644
--- a/arch/arm/plat-stmp3xxx/Kconfig
+++ b/arch/arm/plat-stmp3xxx/Kconfig
@@ -2,26 +2,6 @@ if ARCH_STMP3XXX
menu "Freescale STMP3xxx implementations"
-choice
- prompt "Select STMP3xxx chip family"
-
-config ARCH_STMP378X
- bool "Freescale STMP378x"
- select CPU_ARM926T
- ---help---
- STMP378x refers to 3780 through 3789 chips
-
-endchoice
-
-choice
- prompt "Select STMP3xxx board type"
-
-config MACH_STMP378X
- depends on ARCH_STMP378X
- bool "Freescale STMP378x development board"
-
-endchoice
-
endmenu
endif
--
1.7.2.5
More information about the linux-arm-kernel
mailing list