February 2011 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Tue Feb 1 00:24:58 EST 2011
Ending: Mon Feb 28 23:51:34 EST 2011
Messages: 3759

• [patch 1/1] t5325: add audio support   Arnaud Patard (Rtp)
• [PATCH 3/9] Add a mfd IPUv3 driver   Arnaud Patard (Rtp)
• [patch 0/5] Genesi Efika MX/SB support improvements   Arnaud Patard (Rtp)
• [patch 1/5] Introduce EFIKA_COMMON   Arnaud Patard (Rtp)
• [patch 2/5] efikamx: add usb h1 support   Arnaud Patard (Rtp)
• [patch 3/5] efikamx: add mc13892 support / implement power off   Arnaud Patard (Rtp)
• [patch 4/5] efika: enable cpufreq   Arnaud Patard (Rtp)
• [patch 5/5] mx51: add support for efika smartbook   Arnaud Patard (Rtp)
• [patch 1/5] Introduce EFIKA_COMMON   Arnaud Patard (Rtp)
• [patch 3/5] efikamx: add mc13892 support / implement power off   Arnaud Patard (Rtp)
• [PATCH 2/2] ARM: iMX5 BBG: add cpuidle driver parameters   Arnaud Patard (Rtp)
• [PATCH 2/2] ARM: iMX5 BBG: add cpuidle driver parameters   Arnaud Patard (Rtp)
• [patch v2 0/5] Genesi Efika MX/SB support improvements   Arnaud Patard (Rtp)
• [patch v2 1/5] Introduce EFIKA_COMMON   Arnaud Patard (Rtp)
• [patch v2 2/5] efikamx: add usb h1 support   Arnaud Patard (Rtp)
• [patch v2 3/5] efikamx: add mc13892 support / implement power off   Arnaud Patard (Rtp)
• [patch v2 4/5] efika: enable cpufreq   Arnaud Patard (Rtp)
• [patch v2 5/5] mx51: add support for efika smartbook   Arnaud Patard (Rtp)
• [PATCH 1/7] Add a mfd IPUv3 driver   Arnaud Patard (Rtp)
• [PATCH 7/7] ARM i.MX51 babbage: Add framebuffer support   Arnaud Patard (Rtp)
• [PATCH V2 0/5] sdhci-esdhc-imx: use gpio for write protection and card detection   Arnaud Patard (Rtp)
• [PATCH V3 0/5] sdhci-esdhc-imx: use gpio for write protection and card detection   Arnaud Patard (Rtp)
• [PATCH V3 0/5] sdhci-esdhc-imx: use gpio for write protection and card detection   Arnaud Patard (Rtp)
• [patch 0/2] Get watchdog reboot working on efika smartbook   Arnaud Patard (Rtp)
• [patch 1/2] mc13892: reboot on wdi event   Arnaud Patard (Rtp)
• [patch 2/2] efika mx/sb: enable watchdog   Arnaud Patard (Rtp)
• [patch 1/2] mc13892: reboot on wdi event   Arnaud Patard (Rtp)
• [patch 1/2] mc13892: reboot on wdi event   Arnaud Patard (Rtp)
• [patch 1/2] mc13892: reboot on wdi event   Arnaud Patard (Rtp)
• [PATCHv2 1/2] ads7846: OMAP3: Removal of warnings backtrace in bootup   ABRAHAM, KISHON VIJAY
• [PATCH 0/3] VIA/Wondermedia clock support   Linux Mailing List Email Account
• [PATCH 2/3] VIA/Wondermedia clock support   Linux Mailing List Email Account
• [PATCH 1/3] VIA/Wondermedia clock support   Linux Mailing List Email Account
• [PATCH 3/3] VIA/Wondermedia clock support   Linux Mailing List Email Account
• PATCH [0/1] Clock support for VT8500/WM8505   Linux Mailing List Email Account
• PATCH [1/1] Clock support for VT8500/WM8505   Linux Mailing List Email Account
• PATCH [1/1] V2 - Clock Support for VT8500/WM8505   Linux Mailing List Email Account
• [PATCH] collie: do actually pass locomo_info to locomo driver   Andrea Adami
• ALSA issue on DA850/OMAP-L138/AM18x   Christophe Aeschlimann
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   Sakari Ailus
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   Sakari Ailus
• [PATCH] i.MX23/28 framebuffer driver   Dave Airlie
• [PATCH V3 1/1] ST SPEAr: PCIE gadget suppport   Pratyush Anand
• [PATCH V4] ST SPEAr: PCIE gadget suppport   Pratyush Anand
• [PATCH V5 Resend] ST SPEAr: PCIE gadget suppport   Pratyush Anand
• [PATCH 0/2] ARM: add support for QQ2440 board   Domenico Andreoli
• [PATCH 1/2] ARM: QQ2440 machine architecture   Domenico Andreoli
• [PATCH 2/2] ARM: QQ2440 networking support   Domenico Andreoli
• [PATCH 2/2] ARM: QQ2440 networking support   Domenico Andreoli
• [PATCH 1/2] ARM: QQ2440 machine architecture   Domenico Andreoli
• [PATCH] i.MX23/28 framebuffer driver   Domenico Andreoli
• [PATCH 0/2] ARM IRQ Kconfig Changes   Felipe Balbi
• [PATCH 1/2] arm: Kconfig: select correct HAVE_SPARSE_IRQ symbol   Felipe Balbi
• [PATCH 2/2] arm: Kconfig: allow OMAP to use sparse IRQ numbering   Felipe Balbi
• [PATCHv2 2/2] Input: ads7846 - configure pendown gpio as input   Felipe Balbi
• [PATCHv2 2/2] Input: ads7846 - configure pendown gpio as input   Felipe Balbi
• [PATCHv2 1/2] ads7846: OMAP3: Removal of warnings backtrace in bootup   Felipe Balbi
• [PATCH 1/2] omap3sdp: Fix regulator mapping for ads7846 TS controller   Felipe Balbi
• [PATCH 2/2] omap3sdp: clean regulator supply mapping in board file   Felipe Balbi
• [PATCH v2 1/2] omap3sdp: Fix regulator mapping for ads7846 TS controller   Felipe Balbi
• [PATCH v2 2/2] omap3sdp: clean regulator supply mapping in board file   Felipe Balbi
• [PATCH] omap4: usb: explicitly configure MUSB pads   Felipe Balbi
• [PATCH 1/2] omap4: 4430sdp: drop ehci support   Felipe Balbi
• [PATCH 1/2] omap4: 4430sdp: drop ehci support   Felipe Balbi
• [PATCH 1/2] omap4: 4430sdp: drop ehci support   Felipe Balbi
• [patch-v2.6.39 0/7] Patches for next merge window   Felipe Balbi
• [patch-v2.6.39 1/7] arm: omap4: usb: explicitly configure MUSB pads   Felipe Balbi
• [patch-v2.6.39 2/7] arm: omap4: 4430sdp: drop ehci support   Felipe Balbi
• [patch-v2.6.39 3/7] OMAP2430: hwmod data: Add USBOTG   Felipe Balbi
• [patch-v2.6.39 4/7] OMAP3xxx: hwmod data: Add USBOTG   Felipe Balbi
• [patch-v2.6.39 5/7] AM35xx: hwmod data: Add USBOTG   Felipe Balbi
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Felipe Balbi
• [patch-v2.6.39 7/7] OMAP2+: musb: hwmod adaptation for musb registration   Felipe Balbi
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Felipe Balbi
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Felipe Balbi
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Felipe Balbi
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Felipe Balbi
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Felipe Balbi
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Felipe Balbi
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Felipe Balbi
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Felipe Balbi
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Felipe Balbi
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Felipe Balbi
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Felipe Balbi
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Felipe Balbi
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   Felipe Balbi
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   Felipe Balbi
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   Felipe Balbi
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   Felipe Balbi
• [PATCH] mmc: mmc_mxc: Allow selection only for the correct platforms   Chris Ball
• [PATCH v2 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Chris Ball
• [PATCH v2 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Chris Ball
• [PATCH v2] mxcmmc: use dmaengine API   Chris Ball
• [PATCH v3] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Chris Ball
• [PATCH V4 0/3] adding write_protect and card_detect for mx25/35   Chris Ball
• [PATCH] i.MX23/28 framebuffer driver   Jesse Barker
• [PATCH RFC] ARM: MPCore v6_early_abort enhancement   Valentine Barshak
• [PATCH 1/2] video: Add i.MX23/28 framebuffer driver   Juergen Beisert
• [PATCH 1/2] video: Add i.MX23/28 framebuffer driver   Juergen Beisert
• [PATCH 1/2] video: Add i.MX23/28 framebuffer driver   Juergen Beisert
• [PATCH 1/2] video: Add i.MX23/28 framebuffer driver   Juergen Beisert
• [PATCH v4 1/4] drivers: hwspinlock: add framework   Ohad Ben-Cohen
• [PATCH v4 1/4] drivers: hwspinlock: add framework   Ohad Ben-Cohen
• [PATCH v4 1/4] drivers: hwspinlock: add framework   Ohad Ben-Cohen
• [PATCH v5 0/4] Introduce hardware spinlock framework   Ohad Ben-Cohen
• [PATCH v5 1/4] drivers: hwspinlock: add framework   Ohad Ben-Cohen
• [PATCH v5 2/4] drivers: hwspinlock: add OMAP implementation   Ohad Ben-Cohen
• [PATCH v5 3/4] OMAP4: hwmod data: Add hwspinlock   Ohad Ben-Cohen
• [PATCH v5 4/4] omap: add hwspinlock device   Ohad Ben-Cohen
• [RFC] Inter-processor Mailboxes Drivers   Ohad Ben-Cohen
• [PATCH v3] Add i.MX51/53 IPU framebuffer support   Eric Benard
• [PATCH V3 0/5] sdhci-esdhc-imx: use gpio for write protection and card detection   Eric Benard
• [PATCH V3 0/5] sdhci-esdhc-imx: use gpio for write protection and card detection   Eric Benard
• [PATCH v4 1/4] drivers: hwspinlock: add framework   Arnd Bergmann
• ARM unaligned MMIO access with attribute((packed))   Arnd Bergmann
• ARM unaligned MMIO access with attribute((packed))   Arnd Bergmann
• ARM unaligned MMIO access with attribute((packed))   Arnd Bergmann
• ARM unaligned MMIO access with attribute((packed))   Arnd Bergmann
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Arnd Bergmann
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Arnd Bergmann
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Arnd Bergmann
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Arnd Bergmann
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Arnd Bergmann
• [PATCH 3/4] ARM: Xilinx: Adding timer support to the platform   Arnd Bergmann
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Arnd Bergmann
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Arnd Bergmann
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Arnd Bergmann
• [PATCH 3/4] ARM: Xilinx: Adding timer support to the platform   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Arnd Bergmann
• [PATCH] i.MX23/28 framebuffer driver   Arnd Bergmann
• [PATCH] i.MX23/28 framebuffer driver   Arnd Bergmann
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Arnd Bergmann
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Arnd Bergmann
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Arnd Bergmann
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Arnd Bergmann
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• [PATCH v2 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Arnd Bergmann
• [[PATCH 1/4] arm: mach-mmp: Fix Kconfig to allow correct PXA Selections   Arnd Bergmann
• [PATCH 2/4] arm: configs: update mmp2 defconfig for brownstone and SoC Selection   Arnd Bergmann
• [PATCH 5/5] arm: mach-mmp: brownstone.c support multiple sd slots   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• [PATCH] i.MX23/28 framebuffer driver   Arnd Bergmann
• [PATCH v2 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Arnd Bergmann
• [PATCH v2 1/3] dmaengine: mxs-dma: add dma support for i.MX23/28   Arnd Bergmann
• [PATCH V3 3/4] ARM: Xilinx: base header files and assembly macros   Arnd Bergmann
• [PATCH V3 3/4] ARM: Xilinx: base header files and assembly macros   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• [PATCH v2 1/3] dmaengine: mxs-dma: add dma support for i.MX23/28   Arnd Bergmann
• [PATCH v2] mxcmmc: use dmaengine API   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• [PATCH v2 09/13] can: pruss CAN driver.   Arnd Bergmann
• [PATCH 1/2] PRUSS UIO driver support   Arnd Bergmann
• [PATCH 1/2] PRUSS UIO driver support   Arnd Bergmann
• [PATCH v2 13/13] tty: pruss SUART driver   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• [PATCH V4 3/4] ARM: Xilinx: base header files and assembly macros   Arnd Bergmann
• [PATCH V4 3/4] ARM: Xilinx: base header files and assembly macros   Arnd Bergmann
• [PATCH V4 3/4] ARM: Xilinx: base header files and assembly macros   Arnd Bergmann
• CLOCK_TICK_RATE, was: Re: [PATCH V4 3/4] ARM: Xilinx: base header files and assembly macros   Arnd Bergmann
• [PATCH v3] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Arnd Bergmann
• [PATCH v2 13/13] tty: pruss SUART driver   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• [PATCH 3/8] Add a mfd IPUv3 driver   Arnd Bergmann
• Question about ARM function graph tracing   Tim Bird
• Question about ARM function graph tracing   Tim Bird
• Question about ARM function graph tracing   Tim Bird
• [PATCH 4/4] mtd: OneNAND: OMAP2: increase multiblock erase verify timeout   Artem Bityutskiy
• [PATCH V4 0/6] pxa3xx_nand update series set version 4   Artem Bityutskiy
• [PATCH] mtd: nand: fix one typo in the comments   Artem Bityutskiy
• [PATCH V5 1/6] pxa3xx_nand: make scan procedure more clear   Artem Bityutskiy
• [PATCH V5 6/6] pxa3xx_nand: clean the keep configure code   Artem Bityutskiy
• [RFC] Inter-processor Mailboxes Drivers   Blanchard, Hollis
• [RFC] Inter-processor Mailboxes Drivers   Blanchard, Hollis
• [openmcapi-dev] Re: [RFC] Inter-processor Mailboxes Drivers   Blanchard, Hollis
• [PATCH] i.MX51 iomux: Fixes MX51_PAD_UART2_TXD__UART2_TXD declaration   Julien Boibessot
• [PATCH v2] i.MX51 iomux: Fixes MX51_PAD_UART2_TXD__UART2_TXD declaration   Julien Boibessot
• newbie question: location of frame buffer driver for imx27   Julien Boibessot
• [PATCH 0/4] Support for device-tree appended to zImage   John Bonesio
• [PATCH 1/4] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   John Bonesio
• [PATCH 2/4] ARM:boot:device tree: Merge specific atags into the device tree   John Bonesio
• [PATCH 3/4] ARM:boot:device tree: Add puthex routine for use in the boot wrapper   John Bonesio
• [PATCH 4/4] ARM:boot:device tree: Allow multiple device trees to be appended to zImage   John Bonesio
• [PATCH 0/4] Support for device-tree appended to zImage   John Bonesio
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Stephen Boyd
• [PATCH 0/3] hvc_dcc cleanups and fixes   Stephen Boyd
• [PATCHv2 0/3] hvc_dcc cleanups and fixes   Stephen Boyd
• [PATCHv2 1/3] hvc_dcc: Fix bad code generation by marking assembly volatile   Stephen Boyd
• [PATCHv2 2/3] hvc_dcc: Simplify put_chars()/get_chars() loops   Stephen Boyd
• [PATCHv2 3/3] hvc_dcc: Simplify assembly for v6 and v7 ARM   Stephen Boyd
• [PATCH 12/21] ARM: tegra: clock: Add shared bus clock type   Stephen Boyd
• [PATCH 12/21] ARM: tegra: clock: Add shared bus clock type   Stephen Boyd
• [PATCH 2/2] ARM: remove the 4x expansion presumption while decompressing the kernel   Stephen Boyd
• [PATCH 2/2] ARM: remove the 4x expansion presumption while decompressing the kernel   Stephen Boyd
• [PATCH V3 3/4] ARM: Xilinx: base header files and assembly macros   Stephen Boyd
• [PATCH] msm: headsmp.S: Fix section mismatch   Stephen Boyd
• [PATCH 0/2] Migrate MSM to clkdev   Stephen Boyd
• [PATCH 1/2] msm: clock: Remove references to clk_ops_pcom   Stephen Boyd
• [PATCH 2/2] msm: clock: Migrate to clkdev   Stephen Boyd
• [PATCH 0/4] SCM fixes and updates   Stephen Boyd
• [PATCH 1/4] msm: scm: Mark inline asm as volatile   Stephen Boyd
• [PATCH 2/4] msm: scm: Fix improper register assignment   Stephen Boyd
• [PATCH 3/4] msm: scm: Check for interruption immediately   Stephen Boyd
• [PATCH 4/4] msm: scm: Get cacheline size from CTR   Stephen Boyd
• [TRIVIAL/PATCH] ARM: hw_breakpoint: Fix newlines in WARN messages   Stephen Boyd
• [PATCH 4/4] msm: scm: Get cacheline size from CTR   Stephen Boyd
• [PATCH 4/4] msm: scm: Get cacheline size from CTR   Stephen Boyd
• [PATCH 1/4] msm: scm: Mark inline asm as volatile   Stephen Boyd
• [PATCH 2/4] msm: scm: Fix improper register assignment   Stephen Boyd
• [PATCH] ARM: hw_breakpoint: Fix newlines in WARNings   Stephen Boyd
• [PATCH 4/4] msm: scm: Get cacheline size from CTR   Stephen Boyd
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Jassi Brar
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Jassi Brar
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Jassi Brar
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Jassi Brar
• [RFC, PATCH 3/3] clk: add warnings for incorrect enable/prepare semantics   Jassi Brar
• [PATCH 10/11] ASoC: Change dependency of ARCH_EXYNOS4   Jassi Brar
• [PATCH 1/2] staging: msm: Use explicit GPLv2 licenses   David Brown
• [PATCH 2/2] msm: Use explicit GPLv2 licenses   David Brown
• [PATCH] msm: Remove arch-specific gpiomux tables   David Brown
• [PATCH 2/3] msm: iommu: Generalize platform data for multiple targets   David Brown
• [PATCH 2/3] msm: iommu: Generalize platform data for multiple targets   David Brown
• [PATCH 2/3] msm: iommu: Generalize platform data for multiple targets   David Brown
• [PATCH 2/3] msm: iommu: Generalize platform data for multiple targets   David Brown
• [PATCH v2 1/2] staging: msm: Use explicit GPLv2 licenses   David Brown
• [PATCH v2 2/2] msm: Use explicit GPLv2 licenses   David Brown
• [PATCH 1/5] ARM: smp: Select local timers vs dummy timer support runtime   David Brown
• [PATCH 1/5] ARM: smp: Select local timers vs dummy timer support runtime   David Brown
• [PATCH 1/3] msm: iommu: Create a Kconfig item for the IOMMU driver   David Brown
• [RFC] MMC: error handling improvements   David Brown
• [RFC] MMC: error handling improvements   David Brown
• [RFC 2/5] ARM: P2V: avoid initializers and assembly using PHYS_OFFSET   David Brown
• [PATCH] MAINTAINERS: Update MSM maintainers   David Brown
• [PATCH] msm: add single-wire serial bus interface (SSBI) driver   David Brown
• [PATCH] msm: add single-wire serial bus interface (SSBI) driver   David Brown
• [PATCH 1/3] msm: iommu: Create a Kconfig item for the IOMMU driver   David Brown
• [PATCH v2 2/2] msm: add single-wire serial bus interface (SSBI) driver   David Brown
• [PATCH v2 2/2] msm: add single-wire serial bus interface (SSBI) driver   David Brown
• [PATCH v2 2/2] msm: add single-wire serial bus interface (SSBI) driver   David Brown
• [PATCH v2 2/2] msm: add single-wire serial bus interface (SSBI) driver   David Brown
• [PATCH v2 2/2] msm: add single-wire serial bus interface (SSBI) driver   David Brown
• [PATCH 2/4] msm: scm: Fix improper register assignment   David Brown
• [PATCH 1/4] msm: scm: Mark inline asm as volatile   David Brown
• [PATCH 1/4] msm: scm: Mark inline asm as volatile   David Brown
• [PATCH 1/4] msm: scm: Mark inline asm as volatile   David Brown
• [PATCH 2/2] msm: clock: Migrate to clkdev   David Brown
• [PATCH] EDB93xx: Add support for CS4271 CODEC on EDB93xx boards   Mark Brown
• [alsa-devel] [PATCH] EDB93xx: Add support for CS4271 CODEC on EDB93xx boards   Mark Brown
• [PATCH] EDB93xx: Add support for CS4271 CODEC on EDB93xx boards   Mark Brown
• [PATCH] ARM: S3C64XX: Staticise non-exported GPIO to interrupt functions   Mark Brown
• [PATCH v1 0/9] pruss mfd drivers   Mark Brown
• [PATCH] EDB93xx: Add support for CS4271 CODEC on EDB93xx boards   Mark Brown
• [PATCH] EDB93xx: Add support for CS4271 CODEC on EDB93xx boards   Mark Brown
• [PATCH 1/5] ARM: etm: Don't require clock control   Mark Brown
• [PATCH] ARM: SAMSUNG: Ensure struct sys_device is declared in plat/pm.h   Mark Brown
• [PATCH 1/5] ARM: etm: Don't require clock control   Mark Brown
• [PATCH 07/09] ARM: s3c2440: gta02: Call regulator_has_full_constraints   Mark Brown
• [PATCH] ASoC: CS4271: Move Chip Select control out of the CODEC code.   Mark Brown
• [PATCH 2.6.38 1/3] ARM: SMDK6410: Fix build with WM1190 disabled and WM1192 enabled   Mark Brown
• [PATCH 2.6.38 2/3] ARM: SMDK6410: Update regulator names for debugfs compatiblity   Mark Brown
• [PATCH 3/3] ARM: SMDK6410: Mark regulator setup data __initdata   Mark Brown
• mc13xxx-core, support for i2c, V4   Mark Brown
• [PATCH 10/11] ASoC: Change dependency of ARCH_EXYNOS4   Mark Brown
• platform data and mfd design question   Mark Brown
• platform data and mfd design question   Mark Brown
• platform/i2c busses: pm runtime and system sleep   Mark Brown
• [PATCH] ARM: tegra: Hide EMC scaling config behind ARCH_TEGRA   Mark Brown
• [PATCH 3/3] ASoC: correct pxa AC97 DAI names   Mark Brown
• [PATCH] S3C64XX: Tone down SDHCI debugging   Mark Brown
• [PATCH] eukrea-tlv320: fix platform_name   Mark Brown
• [PATCH] eukrea-tlv320: fix platform_name   Mark Brown
• [patch 1/2] mc13892: reboot on wdi event   Mark Brown
• [patch 1/2] mc13892: reboot on wdi event   Mark Brown
• [PATCH 1/4] ASoC: Add TI tlv320aic32x4 codec support.   Mark Brown
• [patch 1/2] mc13892: reboot on wdi event   Mark Brown
• i.MX & IRQF_ONESHOT   Eric Bénard
• [PATCH] i.MX51 & i.MX53: move registration of gpios to plat-mxc/gpio.c   Eric Bénard
• [PATCH] eukrea-tlv320: fix platform_name   Eric Bénard
• [PATCH] eukrea-tlv320: add MBIMXSD51 support   Eric Bénard
• [PATCH 1/2] eukrea_mbimxsd25-baseboard: add SD card detect   Eric Bénard
• [PATCH 2/2] i.MX25: add sdma clock definitions   Eric Bénard
• [PATCH 1/2] mx3/eukrea_mbimxsd-baseboard: fix gpio request   Eric Bénard
• [PATCH 2/2] mx3/eukrea_mbimxsd-baseboard: add SD card detect support   Eric Bénard
• [PATCH 1/6] eukrea_mbimxsd: add audio support   Eric Bénard
• [PATCH 2/6] cpuimx51sd: add cpufreq support   Eric Bénard
• [PATCH 3/6] cpuimx51sd: fix tsc2007   Eric Bénard
• [PATCH 4/6] cpuimx51sd: mcp2515 supports up to 10MHz SPI clock   Eric Bénard
• [PATCH 5/6] eukrea_mbimxsd51: add IPU support   Eric Bénard
• [PATCH 6/6] eukrea_mbimxsd51: add SD Card detect   Eric Bénard
• [PATCH v2 3/6] cpuimx51sd: fix tsc2007   Eric Bénard
• [PATCH v2 5/6] eukrea_mbimxsd51: add IPU support   Eric Bénard
• N50 Stuff   Marcel Böttcher
• [PATCH] arm: mach-at91: remove double-semicolons   Sylvain Calador
• [PATCH] mx31: add support for the bugbase 1.3 from buglabs   Denis 'GNUtoo' Carikli
• [PATCH] mx31: add support for the bugbase 1.3 from buglabs   Denis 'GNUtoo' Carikli
• [PATCH] mx31: add support for the bugbase 1.3 from buglabs   Denis 'GNUtoo' Carikli
• [PATCH] mx31: add support for the bugbase 1.3 from buglabs   Denis 'GNUtoo' Carikli
• [PATCH] mx31: add support for the bugbase 1.3 from buglabs   Denis 'GNUtoo' Carikli
• [PATCH] mx31: add support for the bugbase 1.3 from buglabs   Denis 'GNUtoo' Carikli
• [PATCHv3] mx31: add support for the bugbase 1.3 from buglabs   Denis 'GNUtoo' Carikli
• [PATCHv3] mx31: add support for the bugbase 1.3 from buglabs   Denis 'GNUtoo' Carikli
• [PATCHv3] mx31: add support for the bugbase 1.3 from buglabs   Denis 'GNUtoo' Carikli
• [PATCH] mx31: add support for the bugbase 1.3 from buglabs   Denis 'GNUtoo' Carikli
• PXA270 Random Hangs at Low Core Freq   Michael Cashwell
• PATCH [1/1] V2 - Clock Support for VT8500/WM8505   Alexey Charkov
• [PATCH] davinci: da850/omap-l138: Add Carrier Link OK check in Davinci RX Handler   Cyril Chemparathy
• [PATCH 3/7] Add i.MX5 framebuffer driver   Jason Chen
• [PATCH 3/7] Add i.MX5 framebuffer driver   Jason Chen
• [PATCH 1/7] Add a mfd IPUv3 driver   Jason Chen
• [PATCH v2 1/1] ARM: imx53: correct Silicon Revision definition following fuse map   Jason Chen
• "Porting the Linux Kernel to a New ARM Platform", updated...?   Steve Chen
• iMX31 MBX registers Porting problem   Chris
• iMX31 MBX registers Porting problem   Chris
• [PATCH v4] dw_mmc: Add Synopsys DesignWare mmc host driver.   Jaehoon Chung
• [PATCH v4] dw_mmc: Add Synopsys DesignWare mmc host driver.   Jaehoon Chung
• [PATCH] i.MX23/28 framebuffer driver   Clark, Rob
• [PATCH] i.MX23/28 framebuffer driver   Clark, Rob
• [PATCH] i.MX23/28 framebuffer driver   Clark, Rob
• [PATCH] i.MX23/28 framebuffer driver   Clark, Rob
• [PATCH] i.MX23/28 framebuffer driver   Clark, Rob
• [PATCH 01/09] ARM: s3c2442: gta02: Fix usage gpio bank j pin definitions   Lars-Peter Clausen
• [PATCH 02/09] ARM: s3c2440: gta02: Register PCM device   Lars-Peter Clausen
• [PATCH 03/09] ARM: s3c2440: gta02: Add button support   Lars-Peter Clausen
• [PATCH 04/09] ARM: s3c2440: gta02: Select missing S3C_DEV_USB_HOST   Lars-Peter Clausen
• [PATCH 05/09] ARM: s3c2440: gta02: Fix regulator valid_modes_ops   Lars-Peter Clausen
• [PATCH 06/09] ARM: s3c2440: gta02: Remove state_mem constraints for the pcf50633 regulators   Lars-Peter Clausen
• [PATCH 07/09] ARM: s3c2440: gta02: Call regulator_has_full_constraints   Lars-Peter Clausen
• [PATCH 08/09] ARM: s3c2440: gta02: Request usb pullup pin before using it   Lars-Peter Clausen
• [PATCH 09/09] ARM: s3c2440: gta02: Add touchscreen support   Lars-Peter Clausen
• [PATCH] s3c2410_udc: Add handling for S3C244X dual-packet mode   Lars-Peter Clausen
• [PATCH v2 07/09] ARM: s3c2440: gta02: Call regulator_has_full_constraints   Lars-Peter Clausen
• BUG: ARM: MMP and PXA: nr_irqs > NR_IRQS   Lars-Peter Clausen
• [PATCH 01/09] ARM: s3c2442: gta02: Fix usage gpio bank j pin definitions   Lars-Peter Clausen
• [PATCH 08/09] ARM: s3c2440: gta02: Request usb pullup pin before using it   Lars-Peter Clausen
• [PATCH 06/09] ARM: s3c2440: gta02: Remove state_mem constraints for the pcf50633 regulators   Lars-Peter Clausen
• [PATCH 09/09] ARM: s3c2440: gta02: Add touchscreen support   Lars-Peter Clausen
• [PATCH 01/09] ARM: s3c2442: gta02: Fix usage gpio bank j pin definitions   Lars-Peter Clausen
• [PATCH 08/09] ARM: s3c2440: gta02: Request usb pullup pin before using it   Lars-Peter Clausen
• [PATCH v2 09/09] ARM: s3c2440: gta02: Add touchscreen support   Lars-Peter Clausen
• [PATCHv2] [ARM] orion5x: accelerate NAND on the TS-78xx   Alexander Clouter
• [PATCHv3] [ARM] orion5x: accelerate NAND on the TS-78xx   Alexander Clouter
• [PATCH] [ARM] update FPGA revisions for TS-7800   Alexander Clouter
• [RFC] orion5x: TS-78XX support for FPGA generated doorbell IRQ's   Alexander Clouter
• DreamPlug   Alexander Clouter
• [PATCH V11 0/4] ptp: IEEE 1588 hardware clock support   Richard Cochran
• [PATCH V11 1/4] ptp: Added a brand new class driver for ptp clocks.   Richard Cochran
• [PATCH V11 2/4] ptp: Added a clock that uses the eTSEC found on the MPC85xx.   Richard Cochran
• [PATCH V11 3/4] ptp: Added a clock driver for the IXP46x.   Richard Cochran
• [PATCH V11 4/4] ptp: Added a clock driver for the National Semiconductor PHYTER.   Richard Cochran
• [PATCH V11 0/4] ptp: IEEE 1588 hardware clock support   Richard Cochran
• [PATCH V11 2/4] ptp: Added a clock that uses the eTSEC found on the MPC85xx.   Richard Cochran
• [PATCH V11 2/4] ptp: Added a clock that uses the eTSEC found on the MPC85xx.   Richard Cochran
• [PATCH V11 2/4] ptp: Added a clock that uses the eTSEC found on the MPC85xx.   Richard Cochran
• [PATCH V11 2/4] ptp: Added a clock that uses the eTSEC found on the MPC85xx.   Richard Cochran
• [PATCH V12 0/4] ptp: IEEE 1588 hardware clock support   Richard Cochran
• [PATCH V12 1/4] ptp: Added a brand new class driver for ptp clocks.   Richard Cochran
• [PATCH V12 2/4] ptp: Added a clock that uses the eTSEC found on the MPC85xx.   Richard Cochran
• [PATCH V12 3/4] ptp: Added a clock driver for the IXP46x.   Richard Cochran
• [PATCH V12 4/4] ptp: Added a clock driver for the National Semiconductor PHYTER.   Richard Cochran
• [PATCH] omap iommu: print module name on error messages   David Cohen
• [PATCH] OMAP: IOMMU: add missing function declaration   David Cohen
• [PATCH] OMAP: IOMMU: add missing function declaration   David Cohen
• [PATCH v2] OMAP: IOMMU: add missing function declaration   David Cohen
• [PATCH 0/2] IOMMU fault callback support   David Cohen
• [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()   David Cohen
• [PATCH 2/2] OMAP: IOMMU: add support to callback during fault handling   David Cohen
• [PATCH 0/2] IOMMU fault callback support   David Cohen
• [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()   David Cohen
• [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()   David Cohen
• [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()   David Cohen
• [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()   David Cohen
• [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()   David Cohen
• [PATCH v2 0/1] OMAP: IOMMU fault callback support   David Cohen
• [PATCH v2 1/1] OMAP: IOMMU: add support to callback during fault handling   David Cohen
• [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()   David Cohen
• [PATCH v2 1/1] OMAP: IOMMU: add support to callback during fault handling   David Cohen
• [PATCH v2 1/1] OMAP: IOMMU: add support to callback during fault handling   David Cohen
• [PATCH v3 0/2] OMAP: IOMMU fault callback support   David Cohen
• [PATCH v3 1/2] OMAP2+: IOMMU: don't print fault warning on specific layer   David Cohen
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   David Cohen
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   David Cohen
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   David Cohen
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   David Cohen
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   David Cohen
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   David Cohen
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   David Cohen
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   David Cohen
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   David Cohen
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   David Cohen
• [PATCH 2/2] omap: rx51: mark reserved memory earlier   Felipe Contreras
• advice needed on how best to fix kirkwood kexec   Eric Cooper
• [PATCH] Kirkwood: enable PCIe for kexec   Eric Cooper
• [PATCH v2 1/3] add machine-specific hook to machine_kexec   Eric Cooper
• [PATCH v2 2/3] Kirkwood: enable PCIe before reading device ID register   Eric Cooper
• [PATCH v2 3/3] Kirkwood: enable PCIe for kexec   Eric Cooper
• more kexec problems on kirkwood   Eric Cooper
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Maxime Coquelin
• [PATCH 1/6] omap4: powerdomain: Add supported INACTIVE power state   Cousson, Benoit
• [PATCH 2/6] omap4: prcm: Fix the CPUx clockdomain offsets   Cousson, Benoit
• [PATCH] OMAP4: clockdomain: Fix the CPUx domain name   Benoit Cousson
• [PATCH 2/6] omap4: prcm: Fix the CPUx clockdomain offsets   Cousson, Benoit
• [PATCH v5 3/5] OMAP4: hwmod data: add mailbox data   Cousson, Benoit
• [PATCH v5 3/5] OMAP4: hwmod data: add mailbox data   Cousson, Benoit
• [PATCH 0/3] OMAP2+ hwmod fixes   Cousson, Benoit
• [PATCH 0/8] OMAP4: hwmod data: Add a bunch of IPs   Benoit Cousson
• [PATCH 1/8] OMAP4: hwmod data: Add hwspinlock   Benoit Cousson
• [PATCH 2/8] OMAP4: hwmod data: Add McSPI   Benoit Cousson
• [PATCH 3/8] OMAP4: hwmod data: Add timer   Benoit Cousson
• [PATCH 4/8] OMAP4: hwmod data: Add DSS, DISPC, DSI1&2, RFBI, HDMI and VENC   Benoit Cousson
• [PATCH 5/8] OMAP4: hwmod data: Add mailbox   Benoit Cousson
• [PATCH 6/8] OMAP4: hwmod data: Add DMIC   Benoit Cousson
• [PATCH 7/8] OMAP4: hwmod data: Add McBSP   Benoit Cousson
• [PATCH 8/8] OMAP4: hwmod data: Add AESS, McPDM, bandgap, counter_32k, MMC, KBD, ISS & IPU   Benoit Cousson
• [PATCH 0/8] OMAP4: hwmod data: Add a bunch of IPs   Cousson, Benoit
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Cousson, Benoit
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Cousson, Benoit
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Cousson, Benoit
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Cousson, Benoit
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Cousson, Benoit
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Cousson, Benoit
• [PATCH 2/8] OMAP4: hwmod data: Add McSPI   Cousson, Benoit
• [PATCH] OMAP4: hwmod data: Add rev and dev_attr fields in McSPI   Benoit Cousson
• [PATCH] OMAP4: hwmod data: Add rev and dev_attr fields in McSPI   Benoit Cousson
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Cousson, Benoit
• [PATCH 0/3] OMAP2+ hwmod fixes   Cousson, Benoit
• [PATCH 2/3] OMAP2+: hwmod: Fix what _init_clock returns   Cousson, Benoit
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Cousson, Benoit
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Cousson, Benoit
• [PATCH 1/3] OMAP2+: hwmod: Avoid setup if clock lookup failed   Cousson, Benoit
• [PATCH 1/3] OMAP: smartreflex: move plat/smartreflex.h to mach-omap2/smartreflex.h   Cousson, Benoit
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Cousson, Benoit
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Cousson, Benoit
• [PATCH 0/8] OMAP2+: hwmod/clockevent: allow late-init of individual hwmods   Cousson, Benoit
• [PATCH 4/8] OMAP2+: hwmod: find MPU initiator hwmod during in _register()   Cousson, Benoit
• [PATCH 5/8] OMAP2+: hwmod: allow multiple calls to omap_hwmod_init()   Cousson, Benoit
• [PATCH 0/8] OMAP2+: hwmod/clockevent: allow late-init of individual hwmods   Cousson, Benoit
• [PATCH v10 05/18] OMAP2, 3 DSS2 Change driver name to omap_display   Cousson, Benoit
• [PATCH v10 05/18] OMAP2, 3 DSS2 Change driver name to omap_display   Cousson, Benoit
• [PATCH v10 05/18] OMAP2, 3 DSS2 Change driver name to omap_display   Cousson, Benoit
• [PATCH v10 05/18] OMAP2, 3 DSS2 Change driver name to omap_display   Cousson, Benoit
• [PATCH v2] tty: Add msm_smd_tty driver   Alan Cox
• [PATCH v2 13/13] tty: pruss SUART driver   Alan Cox
• [PATCH v2 13/13] tty: pruss SUART driver   Alan Cox
• [PATCH v2 13/13] tty: pruss SUART driver   Alan Cox
• [PATCH v2 04/28] ARM: mm: cache-l2x0: Add support for re-enabling l2x0   Colin Cross
• [PATCH v2 04/28] ARM: mm: cache-l2x0: Add support for re-enabling l2x0   Colin Cross
• [PATCH v2 04/28] ARM: mm: cache-l2x0: Add support forre-enabling l2x0   Colin Cross
• [RFC,PATCH 1/3] Add a common struct clk   Colin Cross
• [PATCH v3 2/5] ARM: pm: add generic CPU suspend/resume support   Colin Cross
• [PATCH] ARM: vfp: Fix up exception location in Thumb mode   Colin Cross
• [PATCH v3 2/5] ARM: pm: add generic CPU suspend/resume support   Colin Cross
• [PATCH v4 00/22] Updates for Tegra support in 2.6.39   Colin Cross
• [PATCH v4 01/15] ARM: tegra: Centralize macros to define debug uart base   Colin Cross
• [PATCH v4 02/15] ARM: tegra: Add api to control internal powergating   Colin Cross
• [PATCH v4 03/15] ARM: tegra: irqs: Update irq list   Colin Cross
• [PATCH v4 04/15] ARM: tegra: Add prototypes for subsystem suspend functions   Colin Cross
• [PATCH v4 05/15] ARM: tegra: clock: Suspend fixes, and add new clocks   Colin Cross
• [PATCH v4 06/15] ARM: tegra: pinmux: Add missing drive pingroups and fix suspend   Colin Cross
• [PATCH v4 07/15] ARM: tegra: timer: Add idle and suspend support to timers   Colin Cross
• [PATCH v4 08/15] ARM: tegra: irq: Add support for suspend wake sources   Colin Cross
• [PATCH v4 09/15] ARM: tegra: irq: Implement retrigger   Colin Cross
• [PATCH v4 10/15] ARM: tegra: iomap: Add missing devices, fix use of SZ_8, SZ_64   Colin Cross
• [PATCH v4 11/15] ARM: tegra: cpufreq: Disable cpufreq during suspend   Colin Cross
• [PATCH v4 12/15] ARM: tegra: Allow overriding arch_reset   Colin Cross
• [PATCH v4 13/15] ARM: tegra: dma: Fix critical data corruption bugs   Colin Cross
• [PATCH v4 14/15] ARM: tegra: add tegra_defconfig   Colin Cross
• [PATCH v4 15/15] ARM: tegra: Use writel_relaxed in tegra_init_cache   Colin Cross
• [PATCH 1/5] cpu_pm: Add cpu power management notifiers   Colin Cross
• [PATCH 1/5] cpu_pm: Add cpu power management notifiers   Colin Cross
• [RFC PATCH 0/3] CPU PM notifiers   Colin Cross
• [RFC PATCH 1/3] ARM: Add cpu power management notifiers   Colin Cross
• [RFC PATCH 2/3] ARM: gic: Use cpu pm notifiers to save gic state   Colin Cross
• [RFC PATCH 3/3] ARM: vfp: Use cpu pm notifiers to save vfp state   Colin Cross
• [patch 47/75] arm: tegra: Remove unused function which fiddles with irq_desc   Colin Cross
• [PATCH v4 10/15] ARM: tegra: iomap: Add missing devices, fix use of SZ_8, SZ_64   Colin Cross
• [PATCH 2/2] ARM: tegra: add TrimSlice board   Colin Cross
• [RFC PATCH 3/3] ARM: vfp: Use cpu pm notifiers to save vfp state   Colin Cross
• [PATCH 2/6] ARM: pm: add generic CPU suspend/resume support   Colin Cross
• [PATCH 1/6] ARM: move cache/processor/fault glue to separate include files   Colin Cross
• [PATCH 6/6] ARM: pm: allow generic sleep code to be used with SMP CPU idle   Colin Cross
• [PATCH v4 00/22] Updates for Tegra support in 2.6.39   Colin Cross
• [PATCH 00/21] Tegra clock updates for 2.6.39   Colin Cross
• [PATCH 01/21] ARM: tegra: clock: enable clk reset for non-peripheral clocks   Colin Cross
• [PATCH 02/21] ARM: tegra: clock: Don't BUG on changing an enabled PLL   Colin Cross
• [PATCH 03/21] ARM: tegra: clock: Drop debugging   Colin Cross
• [PATCH 04/21] ARM: tegra: clock: Don't use PLL lock bits   Colin Cross
• [PATCH 05/21] ARM: tegra: clock: Disable clocks left on by bootloader   Colin Cross
• [PATCH 06/21] ARM: tegra: clock: Initialize clocks that have no enable   Colin Cross
• [PATCH 07/21] ARM: tegra: clock: Drop CPU dvfs   Colin Cross
• [PATCH 08/21] ARM: tegra: clock: Rearrange static clock tables   Colin Cross
• [PATCH 09/21] ARM: tegra: clock: Move unshared clk struct members into union   Colin Cross
• [PATCH 10/21] ARM: tegra: clock: Convert global lock to a lock per clock   Colin Cross
• [PATCH 11/21] ARM: tegra: cpufreq: Take an extra reference to pllx   Colin Cross
• [PATCH 12/21] ARM: tegra: clock: Add shared bus clock type   Colin Cross
• [PATCH 13/21] ARM: tegra: clock: Remove unnecessary uses of #ifdef CONFIG_DEBUG_FS   Colin Cross
• [PATCH 14/21] ARM: tegra: clock: Refcount periph clock enables   Colin Cross
• [PATCH 15/21] ARM: tegra: clock: Round rate before setting rate   Colin Cross
• [PATCH 16/21] ARM: tegra: Add external memory controller driver   Colin Cross
• [PATCH 17/21] ARM: tegra: clocks: Add emc scaling   Colin Cross
• [PATCH 18/21] ARM: tegra: cpufreq: Adjust memory frequency with cpu frequency   Colin Cross
• [PATCH 19/21] ARM: tegra: clock: Add function to set SDMMC tap delay   Colin Cross
• [PATCH 20/21] ARM: tegra: clock: Fix clock issues in suspend   Colin Cross
• [PATCH 21/21] ARM: tegra: clock: Miscellaneous clock updates   Colin Cross
• [PATCH 2/2] ARM: tegra: add TrimSlice board   Colin Cross
• [RFC PATCH 3/3] ARM: vfp: Use cpu pm notifiers to save vfp state   Colin Cross
• [PATCH 6/6] ARM: pm: allow generic sleep code to be used with SMP CPU idle   Colin Cross
• [PATCH] ARM: vfp: Always save VFP state in vfp_pm_suspend   Colin Cross
• [PATCH] ARM: vfp: Always save VFP state in vfp_pm_suspend   Colin Cross
• [PATCH v2] ARM: vfp: Always save VFP state in vfp_pm_suspend   Colin Cross
• [PATCH 2/6] ARM: pm: add generic CPU suspend/resume support   Colin Cross
• [PATCH 2/6] ARM: pm: add generic CPU suspend/resume support   Colin Cross
• [PATCH 2/6] ARM: pm: add generic CPU suspend/resume support   Colin Cross
• [PATCH 2/6] ARM: pm: add generic CPU suspend/resume support   Colin Cross
• [PATCH v2] ARM: vfp: Always save VFP state in vfp_pm_suspend   Colin Cross
• [PATCH 12/21] ARM: tegra: clock: Add shared bus clock type   Colin Cross
• [PATCH 12/21] ARM: tegra: clock: Add shared bus clock type   Colin Cross
• [PATCH 2/6] ARM: pm: add generic CPU suspend/resume support   Colin Cross
• [RFC PATCH 2/3] ARM: gic: Use cpu pm notifiers to save gic state   Colin Cross
• [PATCH] ARM: gic: use handle_fasteoi_irq for SPIs   Colin Cross
• [PATCH v2 12/21] ARM: tegra: clock: Add shared bus clock type   Colin Cross
• [PATCH v2 00/21] Tegra clock updates for 2.6.39   Colin Cross
• [PATCH v2 01/21] ARM: tegra: clock: enable clk reset for non-peripheral clocks   Colin Cross
• [PATCH v2 02/21] ARM: tegra: clock: Don't BUG on changing an enabled PLL   Colin Cross
• [PATCH v2 03/21] ARM: tegra: clock: Drop debugging   Colin Cross
• [PATCH v2 04/21] ARM: tegra: clock: Don't use PLL lock bits   Colin Cross
• [PATCH v2 05/21] ARM: tegra: clock: Disable clocks left on by bootloader   Colin Cross
• [PATCH v2 06/21] ARM: tegra: clock: Initialize clocks that have no enable   Colin Cross
• [PATCH v2 07/21] ARM: tegra: clock: Drop CPU dvfs   Colin Cross
• [PATCH v2 08/21] ARM: tegra: clock: Rearrange static clock tables   Colin Cross
• [PATCH v2 09/21] ARM: tegra: clock: Move unshared clk struct members into union   Colin Cross
• [PATCH v2 10/21] ARM: tegra: clock: Convert global lock to a lock per clock   Colin Cross
• [PATCH v2 11/21] ARM: tegra: cpufreq: Take an extra reference to pllx   Colin Cross
• [PATCH v2 12/21] ARM: tegra: clock: Add shared bus clock type   Colin Cross
• [PATCH v2 13/21] ARM: tegra: clock: Remove unnecessary uses of #ifdef CONFIG_DEBUG_FS   Colin Cross
• [PATCH v2 14/21] ARM: tegra: clock: Refcount periph clock enables   Colin Cross
• [PATCH v2 15/21] ARM: tegra: clock: Round rate before setting rate   Colin Cross
• [PATCH v2 16/21] ARM: tegra: Add external memory controller driver   Colin Cross
• [PATCH v2 17/21] ARM: tegra: clocks: Add emc scaling   Colin Cross
• [PATCH v2 18/21] ARM: tegra: cpufreq: Adjust memory frequency with cpu frequency   Colin Cross
• [PATCH v2 19/21] ARM: tegra: clock: Add function to set SDMMC tap delay   Colin Cross
• [PATCH v2 20/21] ARM: tegra: clock: Fix clock issues in suspend   Colin Cross
• [PATCH v2 21/21] ARM: tegra: clock: Miscellaneous clock updates   Colin Cross
• [PATCH] Fix hang on reboot with Tegra2   Colin Cross
• [PATCH v2] ARM: vfp: Always save VFP state in vfp_pm_suspend   Colin Cross
• [PATCH v2] i2c: tegra: Add i2c support   Colin Cross
• [PATCH v2 05/21] ARM: tegra: clock: Disable clocks left on by bootloader   Colin Cross
• [PATCH 2/4] ARM: tegra: Prevent requeuing in-progress DMA requests   Colin Cross
• [PATCH v2 02/21] ARM: tegra: clock: Don't BUG on changing an enabled PLL   Colin Cross
• [PATCH v2 03/21] ARM: tegra: clock: Drop debugging   Colin Cross
• [PATCH v2 09/21] ARM: tegra: clock: Move unshared clk struct members into union   Colin Cross
• [PATCH v2 12/21] ARM: tegra: clock: Add shared bus clock type   Colin Cross
• [PATCH v2 14/21] ARM: tegra: clock: Refcount periph clock enables   Colin Cross
• [PATCH v2 15/21] ARM: tegra: clock: Round rate before setting rate   Colin Cross
• [PATCH 0/7] Second batch of Tegra clock updates for 2.6.39   Colin Cross
• [PATCH 1/7] ARM: tegra: clock: Refcount periph clock enables   Colin Cross
• [PATCH 2/7] ARM: tegra: clock: Round rate before setting rate   Colin Cross
• [PATCH 3/7] ARM: tegra: clock: Check for clk_num == 0   Colin Cross
• [PATCH 4/7] ARM: tegra: Move tegra_common_init to tegra_init_early   Colin Cross
• [PATCH 5/7] ARM: tegra: timer: Enable timer and rtc clocks   Colin Cross
• [PATCH 6/7] ARM: tegra: common: Enable core clocks   Colin Cross
• [PATCH 7/7] ARM: tegra: clock: Disable clocks left on by bootloader   Colin Cross
• [PATCH 4/4] ARM: tegra: Move pinmux init call   Colin Cross
• [PATCH 6/6] ARM: tegra: add seaboard, wario and kaen boards   Colin Cross
• [PATCH 5/7] ARM: tegra: timer: Enable timer and rtc clocks   Colin Cross
• [PATCH 7/7] ARM: tegra: clock: Disable clocks left on by bootloader   Colin Cross
• [PATCH 3/5] ARM: tegra: update GPIO chained IRQ handler to use EOI in parent chip   Colin Cross
• [PATCH 0/7] Second batch of Tegra clock updates for 2.6.39   Colin Cross
• [PATCH 3/6] ARM: tegra: remove stale nvidia atag handler   Colin Cross
• [PATCH 4/6] ARM: tegra: harmony: register sdhci devices   Colin Cross
• [PATCH 1/4] ARM: tegra: Fix typo in TEGRA_IRQ_TO_GPIO   Colin Cross
• [PATCH v2] i2c: tegra: Add i2c support   Colin Cross
• [PATCH] ARM: tegra: Hide EMC scaling config behind ARCH_TEGRA   Colin Cross
• Problem with "ARM: tegra: Move tegra_common_init to tegra_init_early"   Colin Cross
• [PATCH] ARM: Tegra: Make tegra_dma_init a postcore_initcall   Colin Cross
• [PATCH] ARM: Tegra: DMA: Fail safe if initialization fails   Colin Cross
• [PATCH 5/7] ARM: tegra: timer: Enable timer and rtc clocks   Colin Cross
• [PATCH] ARM: Tegra: DMA: Fail safe if initialization fails   Colin Cross
• [PATCH 4/5] ARM: Tegra: Create defines for GPIO names   Colin Cross
• [PATCH v2] i2c: tegra: Add i2c support   Colin Cross
• [PATCH 4/5] ARM: Tegra: Create defines for GPIO names   Colin Cross
• [PATCH 4/5] ARM: Tegra: Create defines for GPIO names   Colin Cross
• [PATCH v2] ARM: Tegra: DMA: Fail safe if initialization fails   Colin Cross
• [PATCH 1/5] ARM: Tegra: Add devices.c entries for audio   Colin Cross
• [PATCH 2/5] ARM: Tegra: Rename I2S clocks to match driver name   Colin Cross
• [PATCH 3/5] ARM: Tegra: Rename clk_dev1/2 to cdev1/2   Colin Cross
• [PATCH 5/5] ARM: Tegra: Enable Harmony audio support   Colin Cross
• [PATCH 5/5] ARM: Tegra: Enable Harmony audio support   Colin Cross
• [PATCH 5/5] ARM: Tegra: Enable Harmony audio support   Colin Cross
• [PATCH 5/5] ARM: Tegra: Enable Harmony audio support   Colin Cross
• [GIT PULL] Please pull tegra board updates for .39   Colin Cross
• [PATCH v5 0/5] omap: mailbox: hwmod support   Hiroshi DOYU
• [RFC] Inter-processor Mailboxes Drivers   Hiroshi DOYU
• [RFC] Inter-processor Mailboxes Drivers   Hiroshi DOYU
• [RFC] Inter-processor Mailboxes Drivers   Hiroshi DOYU
• [RFC] Inter-processor Mailboxes Drivers   Hiroshi DOYU
• [PATCH] omap iommu: print module name on error messages   Hiroshi DOYU
• [PATCH v2] OMAP: IOMMU: add missing function declaration   Hiroshi DOYU
• [PATCH v2 1/1] OMAP: IOMMU: add support to callback during fault handling   Hiroshi DOYU
• [RFC] Inter-processor Mailboxes Drivers   Hiroshi DOYU
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   Hiroshi DOYU
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   Hiroshi DOYU
• [PATCH v3 0/2] OMAP: IOMMU fault callback support   Hiroshi DOYU
• Question About Linux Memory Mapping   Drasko DRASKOVIC
• Question About Linux Memory Mapping   Drasko DRASKOVIC
• Question About Linux Memory Mapping   Drasko DRASKOVIC
• [PATCH RFC] ARM: MPCore v6_early_abort enhancement   George G. Davis
• [PATCH] ARM: add Versatile Express defconfig   Will Deacon
• [PATCH] RFC: ux500: add PMU resources   Will Deacon
• [PATCH] RFC: ux500: add PMU resources   Will Deacon
• [PATCH] ARM: perf/oprofile: fix off-by-one in stack check   Will Deacon
• [RFC PATCH] ARM: pmu: add OF match support   Will Deacon
• [PATCHv2] ARM: perf/oprofile: fix off-by-one in stack check   Will Deacon
• [PATCH] ARM: Correct WFE() in asm/spinlock.h for Thumb-2   Will Deacon
• [PATCH] ARM: hw_breakpoint: avoid UNPREDICTABLE behaviour when reading DBGDSCR   Will Deacon
• [PATCH v2] ARM: ptrace: remove single-step emulation code   Will Deacon
• [RFC PATCH] ARM: pmu: add OF match support   Will Deacon
• [RFC PATCH] ARM: pmu: add OF match support   Will Deacon
• [PATCH] ARM: hw_breakpoint: fix ptrace breakpoint advertising on unsupported arch   Will Deacon
• [PATCH v2] ARM: ptrace: remove single-step emulation code   Will Deacon
• [PATCH] ARM: gic: use handle_fasteoi_irq for SPIs   Will Deacon
• [PATCHv2 1/2] ARM: perf_event: allow platform-specific interrupt handler   Will Deacon
• [PATCH 1/2] ARM: Introduce THREAD_NOTIFY_COPY for copy_thread() hooks   Will Deacon
• [PATCH][RESEND] ARM: vexpress: add support for multiple core tiles   Will Deacon
• [PATCH] ARM: gic: use handle_fasteoi_irq for SPIs   Will Deacon
• [PATCH v4 15/19] ARM: LPAE: use phys_addr_t instead of unsigned long for physical addresses   Will Deacon
• [PATCH] ARM: pmu: avoid setting IRQ affinity on UP systems   Will Deacon
• [PATCH v4 15/19] ARM: LPAE: use phys_addr_t instead of unsigned long for physical addresses   Will Deacon
• [PATCH v4 15/19] ARM: LPAE: use phys_addr_t instead of unsigned long for physical addresses   Will Deacon
• [PATCH 0/4] ARM: add support for hw-breakpoints [v4]   Will Deacon
• [PATCH] ARM: gic: use handle_fasteoi_irq for SPIs   Will Deacon
• [PATCH] ARM: gic: use handle_fasteoi_irq for SPIs   Will Deacon
• [PATCH] ARM: gic: use handle_fasteoi_irq for SPIs   Will Deacon
• [PATCHv2 1/2] ARM: perf_event: allow platform-specific interrupt handler   Will Deacon
• [PATCH] ARM: gic: use handle_fasteoi_irq for SPIs   Will Deacon
• [PATCHv2 1/2] ARM: perf_event: allow platform-specific interrupt handler   Will Deacon
• [PATCH] ARM: gic: use handle_fasteoi_irq for SPIs   Will Deacon
• [PATCH] ARM: pmu: avoid setting IRQ affinity on UP systems   Will Deacon
• [PATCH] ARM: gic: use handle_fasteoi_irq for SPIs   Will Deacon
• [PATCH v4 15/19] ARM: LPAE: use phys_addr_t instead of unsigned long for physical addresses   Will Deacon
• [PATCH v4 15/19] ARM: LPAE: use phys_addr_t instead of unsigned long for physical addresses   Will Deacon
• [PATCH 0/5] Migrate GIC to fasteoi flow control   Will Deacon
• [PATCH 1/5] ARM: gic: use handle_fasteoi_irq for SPIs   Will Deacon
• [PATCH 2/5] ARM: omap: update GPIO chained IRQ handler to use EOI in parent chip   Will Deacon
• [PATCH 3/5] ARM: tegra: update GPIO chained IRQ handler to use EOI in parent chip   Will Deacon
• [PATCH 4/5] ARM: s5pv310: update IRQ combiner to use EOI in parent chip   Will Deacon
• [PATCH 5/5] ARM: msm: update GPIO chained IRQ handler to use EOI in parent chip   Will Deacon
• [PATCH 2/5] ARM: omap: update GPIO chained IRQ handler to use EOI in parent chip   Will Deacon
• [PATCH 2/5] ARM: omap: update GPIO chained IRQ handler to use EOI in parent chip   Will Deacon
• [PATCH] ARM: ptrace: fix register indexing in GETHBPREGS request   Will Deacon
• [PATCH 3/5] ARM: tegra: update GPIO chained IRQ handler to use EOI in parent chip   Will Deacon
• [PATCH 3/5] ARM: tegra: update GPIO chained IRQ handler to use EOI in parent chip   Will Deacon
• [PATCH 4/5] ARM: s5pv310: update IRQ combiner to use EOI in parent chip   Will Deacon
• [PATCH] nmk-gpio: use request_irq instead of chained handler   Will Deacon
• [PATCH] nmk-gpio: use request_irq instead of chained handler   Will Deacon
• [PATCH 5/5] ARM: msm: update GPIO chained IRQ handler to use EOI in parent chip   Will Deacon
• [PATCH] ARM: hw_breakpoint: ensure debug logic is powered up on v7 cores   Will Deacon
• [TRIVIAL/PATCH] ARM: hw_breakpoint: Fix newlines in WARN messages   Will Deacon
• [PATCH 1/4] msm: scm: Mark inline asm as volatile   Will Deacon
• [PATCH 2/4] msm: scm: Fix improper register assignment   Will Deacon
• [PATCH] nmk-gpio: use request_irq instead of chained handler   Will Deacon
• [PATCH 1/4] msm: scm: Mark inline asm as volatile   Will Deacon
• [PATCH v2 0/6] Migrate GIC to fasteoi flow control   Will Deacon
• [PATCH 1/6] ARM: gic: use handle_fasteoi_irq for SPIs   Will Deacon
• [PATCH 2/6] ARM: omap: update GPIO chained IRQ handler to use EOI in parent chip   Will Deacon
• [PATCH 3/6] ARM: tegra: update GPIO chained IRQ handler to use EOI in parent chip   Will Deacon
• [PATCH 4/6] ARM: s5pv310: update IRQ combiner to use EOI in parent chip   Will Deacon
• [PATCH 5/6] ARM: msm: update GPIO chained IRQ handler to use EOI in parent chip   Will Deacon
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Will Deacon
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Will Deacon
• [PATCH 8/8] OMAP2+: clockevent: late-init GPTIMER clockevent hwmod right before timer init   DebBarma, Tarun Kanti
• [PATCH 8/8] OMAP2+: clockevent: late-init GPTIMER clockevent hwmodright before timer init   DebBarma, Tarun Kanti
• [PATCH 8/8] OMAP2+: clockevent: late-init GPTIMER clockevent hwmodright before timer init   DebBarma, Tarun Kanti
• [PATCH 8/8] OMAP2+: clockevent: late-init GPTIMER clockevent hwmodright before timer init   DebBarma, Tarun Kanti
• platform data and mfd design question   Abhijeet Dharmapurikar
• [PATCH] ARM: gic: use handle_fasteoi_irq for SPIs   Abhijeet Dharmapurikar
• [PATCH 5/5] ARM: msm: update GPIO chained IRQ handler to use EOI in parent chip   Abhijeet Dharmapurikar
• [PATCH v2 09/13] can: pruss CAN driver.   Kurt Van Dijck
• [PATCH v2 09/13] can: pruss CAN driver.   Kurt Van Dijck
• [PATCH v2 09/13] can: pruss CAN driver.   Kurt Van Dijck
• [PATCH] i2c: OMAP: fix static suspend vs. runtime suspend   Ben Dooks
• [PATCH v2] i2c: tegra: Add i2c support   Ben Dooks
• [PATCH V2] i2c: add driver for Freescale i.MX28   Ben Dooks
• [PATCH 3/6] i2c/pxa2xx: Add PCI support for PXA I2C controller   Ben Dooks
• [PATCH] S3C64XX: Tone down SDHCI debugging   Ben Dooks
• Linux support for Samsung S3C2510A Processor   Ben Dooks
• [PATCH] ARM: reenable DEBUG_SECTION_MISMATCH   Randy Dunlap
• [PATCH V4] ST SPEAr: PCIE gadget suppport   Randy Dunlap
• [PATCH] kbuild: reenable section mismatch analysis   Randy Dunlap
• [PATCH 0/6] Switch pxa25x_udc devices to use gpio-vbus tranceiver   Dmitry Eremin-Solenikov
• [PATCH 1/6] eseries: switch to using gpio-vbus transceiver   Dmitry Eremin-Solenikov
• [PATCH 2/6] gumstix: switch to using gpio-vbus transceiver   Dmitry Eremin-Solenikov
• [PATCH 3/6] PalmTC: switch to using gpio-vbus transceiver   Dmitry Eremin-Solenikov
• [PATCH 4/6] tosa: switch to using gpio-vbus transceiver   Dmitry Eremin-Solenikov
• [PATCH 5/6] pxa25x_udc: stop handling gpio-vbus internally   Dmitry Eremin-Solenikov
• [PATCH 6/6] pxa2xx: drop gpio_vbus field from info struct   Dmitry Eremin-Solenikov
• [PATCH] collie: do actually pass locomo_info to locomo driver   Dmitry Eremin-Solenikov
• [PATCH 0/6] Switch pxa25x_udc devices to use gpio-vbus tranceiver   Dmitry Eremin-Solenikov
• [PATCH] tosa-bt: drop setting LED trigger name, as it's unsupported now   Dmitry Eremin-Solenikov
• [PATCH 0/5][RESENT] Get rid of gpio-vbus related code from pxa25x_udc   Dmitry Eremin-Solenikov
• [PATCH 1/5] eseries: switch to using gpio-vbus transceiver   Dmitry Eremin-Solenikov
• [PATCH 2/5] gumstix: switch to using gpio-vbus transceiver   Dmitry Eremin-Solenikov
• [PATCH 3/5] tosa: switch to using gpio-vbus transceiver   Dmitry Eremin-Solenikov
• [PATCH 4/5] pxa25x_udc: stop handling gpio-vbus internally   Dmitry Eremin-Solenikov
• [PATCH 5/5] pxa2xx: drop gpio_vbus field from info struct   Dmitry Eremin-Solenikov
• [PATCH] i2c-pxa: fix unbinding/rebinding of the device   Dmitry Eremin-Solenikov
• [PATCH 1/3] pxa: Enable pxa-pcm-audio on pxa210/pxa25x platform   Dmitry Eremin-Solenikov
• [PATCH 2/3] tosa: register wm9712 codec device   Dmitry Eremin-Solenikov
• [PATCH 3/3] ASoC: correct pxa AC97 DAI names   Dmitry Eremin-Solenikov
• [PATCH] colibri : don't register pxa2xx-pcmcia nodes on non-colibri platforms   Dmitry Eremin-Solenikov
• [PATCH 1/3] pxa: Enable pxa-pcm-audio on pxa210/pxa25x platform   Dmitry Eremin-Solenikov
• [PATCH RESEND 2.6.39 0/3] ARM: simpad: Add support for GPIO attached hardware   Kristoffer Ericson
• [PATCH 2/2] ARM i.MX23/28: Add framebuffer device support   Fabio Estevam
• [PATCH] mx31: add support for the bugbase 1.3 from buglabs   Fabio Estevam
• [PATCH 1/3] IPUv3: Add i.MX53 IPU support   Fabio Estevam
• [PATCH 16/17] mc13xxx: mfd_cell is now implicitly available to drivers   Fabio Estevam
• [PATCH 16/17] mc13xxx: mfd_cell is now implicitly available to drivers   Fabio Estevam
• newbie question: location of frame buffer driver for imx27   Fabio Estevam
• [PATCH 16/17] mc13xxx: mfd_cell is now implicitly available to drivers   Fabio Estevam
• [PATCH 1/2] ARM: mx5: Add watchdog support for MX53   Fabio Estevam
• [PATCH 2/2] ARM: mach-mx5: Add watchdog support for MX53 based boards   Fabio Estevam
• [PATCH v2 1/2] ARM: mx5: Add watchdog support for MX53   Fabio Estevam
• [PATCH v2 2/2] ARM: mach-mx5: Add watchdog support for MX53 based boards   Fabio Estevam
• [PATCH] ARM: mx53_smd: Add entry to uncompress.h   Fabio Estevam
• [PATCH 16/17] mc13xxx: mfd_cell is now implicitly available to drivers   Fabio Estevam
• [PATCH 4/5] arm: mach-mx3: pcm043: add write-protect and card-detect for SD1   Fabio Estevam
• [PATCH] ARM: imx/mach-mx25_3ds: Use IMX_GPIO_NR instead of hard-coded values   Fabio Estevam
• Build failure on i.MX25 [Was: [PATCH] ARM: imx/mach-mx25_3ds: Use IMX_GPIO_NR instead of hard-coded values]   Fabio Estevam
• [PATCH V3 1/4] ARM: imx53_loco: add esdhc device support   Fabio Estevam
• [PATCH] mmc: mmc_mxc: Allow selection only for the correct platforms   Estevam Fabio-R49496
• [RFC] ARM: dma-mapping: outer cache is invalidated twice   Per Forlin
• [RFC] ARM: dma-mapping: outer cache is invalidated twice   Per Forlin
• [RFC] ARM: dma-mapping: outer cache is invalidated twice   Per Forlin
• [RFC] ARM: dma-mapping: outer cache is invalidated twice   Per Forlin
• Help - Getting started   Bjørn Forsman
• [PATCH 1/2] video: Add i.MX23/28 framebuffer driver   Li Frank-B20596
• [PATCH 2/2] ARM i.MX23/28: Add framebuffer device support   Li Frank-B20596
• [PATCH 1/2] video: Add i.MX23/28 framebuffer driver   Li Frank-B20596
• [PATCH 1/2] video: Add i.MX23/28 framebuffer driver   Li Frank-B20596
• [PATCH 1/2] video: Add i.MX23/28 framebuffer driver   Li Frank-B20596
• [PATCH 1/2] video: Add i.MX23/28 framebuffer driver   Li Frank-B20596
• [PATCH 1/2] video: Add i.MX23/28 framebuffer driver   Li Frank-B20596
• [PATCH 1/2] video: Add i.MX23/28 framebuffer driver   Li Frank-B20596
• [PATCH v2] ARM: kexec: selective MMU identity mapping   Per Fransson
• [PATCH v2] ARM: kexec: selective MMU identity mapping   Per Fransson
• [PATCH 2.6.39 0/3] ARM: simpad: Add support for GPIO attached hardware   Jochen Friedrich
• [PATCH 2.6.39 1/3] ARM: simpad: Add ucb1x00 GPIO definitions and register GPIO   Jochen Friedrich
• [PATCH 2.6.39 2/3] ARM: simpad: Cleanup CS3 accessors and add GPIO API   Jochen Friedrich
• [PATCH 2.6.39 3/3] ARM: simpad: add GPIO based device definitions   Jochen Friedrich
• [PATCH RESEND 2.6.39 0/3] ARM: simpad: Add support for GPIO attached hardware   Jochen Friedrich
• [PATCH RESEND 2.6.39 1/3] ARM: simpad: Add ucb1x00 GPIO definitions and register GPIO   Jochen Friedrich
• [PATCH RESEND 2.6.39 2/3] ARM: simpad: Cleanup CS3 accessors and add GPIO API   Jochen Friedrich
• [PATCH RESEND 2.6.39 3/3] ARM: simpad: add GPIO based device definitions   Jochen Friedrich
• [PATCH RESEND 2.6.39 0/3] ARM: simpad: Add support for GPIO attached hardware   Jochen Friedrich
• [PATCH] kbuild: reenable section mismatch analysis   Mike Frysinger
• Unsubscribe   Tomasz Fujak
• [PATCH v3 2/2] Input: ads7846: use gpio_request_one to configure pendown_gpio   G, Manjunath Kondaiah
• [PATCH v3 2/2] Input: ads7846: use gpio_request_one to configure pendown_gpio   G, Manjunath Kondaiah
• [PATCH v3 2/2] Input: ads7846: use gpio_request_one to configure pendown_gpio   G, Manjunath Kondaiah
• [PATCH v3 2/2] Input: ads7846: use gpio_request_one to configure pendown_gpio   G, Manjunath Kondaiah
• [PATCH] OMAP1: PM: fix omap1 build   G, Manjunath Kondaiah
• [PATCH v2] OMAP: PM: DMA: Enable runtime pm   G, Manjunath Kondaiah
• [PATCH v2] OMAP: PM: DMA: Enable runtime pm   G, Manjunath Kondaiah
• [PATCH v2] OMAP: PM: DMA: Enable runtime pm   G, Manjunath Kondaiah
• [PATCH v2] OMAP: PM: DMA: Enable runtime pm   G, Manjunath Kondaiah
• [PATCH 0/8] OMAP4: hwmod data: Add a bunch of IPs   G, Manjunath Kondaiah
• [PATCH v2] OMAP: PM: DMA: Enable runtime pm   G, Manjunath Kondaiah
• [PATCH 0/3] OMAP: DMA: mstandby mode and runtime pm support   G, Manjunath Kondaiah
• [PATCH 1/3] OMAP2+: PM: omap device: API's for handling mstandby mode   G, Manjunath Kondaiah
• [PATCH 2/3] OMAP2+: DMA: prevent races while setting M idle mode to nostandby   G, Manjunath Kondaiah
• [PATCH 3/3] OMAP: PM: DMA: Enable runtime pm   G, Manjunath Kondaiah
• linux-next-20100201 - OMAP2+ defconfig broken with CONFIG_DEBUG_LL   Gadiyar, Anand
• linux-next-20100201 - OMAP2+ defconfig broken with CONFIG_DEBUG_LL   Anand Gadiyar
• linux-next-20100201 - OMAP2+ defconfig broken withCONFIG_DEBUG_LL   Anand Gadiyar
• [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)   Anand Gadiyar
• [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)   Anand Gadiyar
• [PATCH] OMAP4: PandaBoard: Adding DVI support   Gadiyar, Anand
• [PATCH] omap4: usb: explicitly configure MUSB pads   Anand Gadiyar
• [PATCH 1/2] omap4: 4430sdp: drop ehci support   Anand Gadiyar
• [PATCH 2/2] omap4: 4430sdp: mux GPIO_157 to safe mode   Anand Gadiyar
• [PATCH 1/2] omap4: 4430sdp: drop ehci support   Anand Gadiyar
• [PATCH 0/2] Add PRUSS UIO driver support   Pratheesh Gangadhar
• [PATCH 1/2] PRUSS UIO driver support   Pratheesh Gangadhar
• [PATCH 2/2] Defines DA850/AM18xx/OMAPL1-38 SOC resources used by PRUSS UIO driver   Pratheesh Gangadhar
• [PATCH v2 0/2] Add PRUSS UIO driver support   Pratheesh Gangadhar
• [PATCH v2 1/2] PRUSS UIO driver support   Pratheesh Gangadhar
• [PATCH v2 2/2] Defines DA850/AM18xx/OMAPL1-38 SOC resources used by PRUSS UIO driver   Pratheesh Gangadhar
• [PATCH v3 0/2] Add PRUSS UIO driver support   Pratheesh Gangadhar
• [PATCH v3 1/2] PRUSS UIO driver support   Pratheesh Gangadhar
• [PATCH v3 2/2] Defines DA850/AM18xx/OMAPL1-38 SOC resources used by PRUSS UIO driver   Pratheesh Gangadhar
• [PATCH v4 0/2] Add PRUSS UIO driver support   Pratheesh Gangadhar
• [PATCH v4 1/2] PRUSS UIO driver support   Pratheesh Gangadhar
• [PATCH v4 2/2] Defines DA850/AM18xx/OMAPL1-38 SOC resources used by PRUSS UIO driver   Pratheesh Gangadhar
• [PATCH v5 0/2] Add PRUSS UIO driver support   Pratheesh Gangadhar
• [PATCH v5 1/2] PRUSS UIO driver support   Pratheesh Gangadhar
• [PATCH v5 2/2] Defines DA850/AM18xx/OMAPL1-38 SOC resources used by PRUSS UIO driver   Pratheesh Gangadhar
• [PATCH v6 0/1] Add PRUSS UIO driver support   Pratheesh Gangadhar
• [PATCH v6 1/1] PRUSS UIO driver support   Pratheesh Gangadhar
• [PATCHv8 07/12] mm: cma: Contiguous Memory Allocator added   Ankita Garg
• [PATCH 00/20] world-writable files in sysfs and debugfs   Matthew Garrett
• [PATCH v9 0/7] nand prefetch-irq support and ecc layout chanage   Ghorai, Sukumar
• [PATCH v1 0/9] pruss mfd drivers   Subhasish Ghosh
• [PATCH v1 1/9] mfd: pruss mfd driver.   Subhasish Ghosh
• [PATCH v1 2/9] da850: pruss board specific additions.   Subhasish Ghosh
• [PATCH v1 3/9] da850: pruss platform specific additions.   Subhasish Ghosh
• [PATCH v1 4/9] can: pruss CAN driver.   Subhasish Ghosh
• [PATCH v1 5/9] da850: pruss CAN board specific additions.   Subhasish Ghosh
• [PATCH v1 6/9] da850: pruss CAN platform specific additions.   Subhasish Ghosh
• [PATCH v1 7/9] mfd: pruss CAN private data.   Subhasish Ghosh
• [PATCH v1 8/9] da850: pruss CAN board specific changes for gpios.   Subhasish Ghosh
• [PATCH v1 9/9] da850: pruss CAN platform specific changes for gpios.   Subhasish Ghosh
• [PATCH 1/1] da830: macro rename DA8XX_LPSC0_DMAX to DA8XX_LPSC0_PRUSS.   Subhasish Ghosh
• [PATCH 1/1] davinci: changed SRAM allocator to shared ram.   Subhasish Ghosh
• [PATCH v2 00/13] pruss mfd drivers   Subhasish Ghosh
• [PATCH v2 01/13] mfd: pruss mfd driver.   Subhasish Ghosh
• [PATCH v2 02/13] da850: pruss platform specific additions.   Subhasish Ghosh
• [PATCH v2 03/13] da850: pruss board specific additions.   Subhasish Ghosh
• [PATCH v2 04/13] mfd: pruss CAN private data.   Subhasish Ghosh
• [PATCH v2 05/13] da850: pruss CAN platform specific additions.   Subhasish Ghosh
• [PATCH v2 06/13] da850: pruss CAN board specific additions.   Subhasish Ghosh
• [PATCH v2 07/13] da850: pruss CAN platform specific changes for gpios.   Subhasish Ghosh
• [PATCH v2 08/13] da850: pruss CAN board specific changes for gpios.   Subhasish Ghosh
• [PATCH v2 09/13] can: pruss CAN driver.   Subhasish Ghosh
• [PATCH v2 10/13] mfd: pruss SUART private data.   Subhasish Ghosh
• [PATCH v2 11/13] da850: pruss SUART board specific additions.   Subhasish Ghosh
• [PATCH v2 12/13] da850: pruss SUART platform specific additions.   Subhasish Ghosh
• [PATCH v2 13/13] tty: pruss SUART driver   Subhasish Ghosh
• [PATCH v2 09/13] can: pruss CAN driver.   Subhasish Ghosh
• [PATCH v2 09/13] can: pruss CAN driver.   Subhasish Ghosh
• [PATCH v2 09/13] can: pruss CAN driver.   Subhasish Ghosh
• [PATCH v2 09/13] can: pruss CAN driver.   Subhasish Ghosh
• [PATCH v2 11/13] da850: pruss SUART board specific additions.   Subhasish Ghosh
• [PATCH v2 02/13] da850: pruss platform specific additions.   Subhasish Ghosh
• [PATCH v2 03/13] da850: pruss board specific additions.   Subhasish Ghosh
• [PATCH v2 06/13] da850: pruss CAN board specific additions.   Subhasish Ghosh
• [PATCH v2 06/13] da850: pruss CAN board specific additions.   Subhasish Ghosh
• [PATCH v2 07/13] da850: pruss CAN platform specific changes for gpios.   Subhasish Ghosh
• [PATCH v2 09/13] can: pruss CAN driver.   Subhasish Ghosh
• [PATCH v2 09/13] can: pruss CAN driver.   Subhasish Ghosh
• [PATCH v2 13/13] tty: pruss SUART driver   Subhasish Ghosh
• [PATCH v2 01/13] mfd: pruss mfd driver.   Subhasish Ghosh
• [PATCH v2 11/13] da850: pruss SUART board specific additions.   Subhasish Ghosh
• [PATCH v2 13/13] tty: pruss SUART driver   Subhasish Ghosh
• [PATCH v2 13/13] tty: pruss SUART driver   Subhasish Ghosh
• [PATCH v2 12/13] da850: pruss SUART platform specific additions.   Subhasish Ghosh
• [PATCH v2 01/13] mfd: pruss mfd driver.   Subhasish Ghosh
• [PATCH v2 12/13] da850: pruss SUART platform specific additions.   Subhasish Ghosh
• [PATCH v2 13/13] tty: pruss SUART driver   Subhasish Ghosh
• [PATCH v2 01/13] mfd: pruss mfd driver.   Subhasish Ghosh
• [PATCH v2 13/13] tty: pruss SUART driver   Subhasish Ghosh
• [PATCH 1/1] davinci: changed SRAM allocator to shared ram.   Subhasish Ghosh
• [PATCH 1/1] da830: macro rename DA8XX_LPSC0_DMAX to DA8XX_LPSC0_PRUSS.   Subhasish Ghosh
• [PATCH v2 13/13] tty: pruss SUART driver   Subhasish Ghosh
• [PATCH 1/1] davinci: changed SRAM allocator to shared ram.   Subhasish Ghosh
• [PATCH 1/3] ARM: Tegra: Add pll_d table entries for 252MHz   Erik Gilling
• [PATCH 1/6] ARM: tegra: add tegra_gpio_table and tegra_gpio_config   Erik Gilling
• [PATCH 1/6] ARM: tegra: add tegra_gpio_table and tegra_gpio_config   Erik Gilling
• [bug-dev] [PATCHv3] mx31: add support for the bugbase 1.3 from buglabs   Ken Gilmer
• [RFC,PATCH 2/3] clk: Generic support for fixed-rate clocks   Fabio Giovagnini
• [PATCH] ASoC: CS4271: Move Chip Select control out of the CODEC code.   Liam Girdwood
• [alsa-devel] [PATCH] EDB93xx: Add support for CS4271 SPI-connected CODEC   Liam Girdwood
• [alsa-devel] [PATCH 1/3] pxa: Enable pxa-pcm-audio on pxa210/pxa25x platform   Liam Girdwood
• [alsa-devel] [PATCH] eukrea-tlv320: fix platform_name   Liam Girdwood
• [PATCH] Fix hang on reboot with Tegra2   Simon Glass
• [RFC PATCH] ARM: Use generic BUG() handler   Simon Glass
• [patch 6/8] arm: ns9xxx: Remove private irq flow handler   Thomas Gleixner
• [PATCH] arm: Use generic accessor in irq_set_flags()   Thomas Gleixner
• [patch 20/75] arm: Ns9xxx: Remove private irq flow handler   Thomas Gleixner
• [patch 47/75] arm: tegra: Remove unused function which fiddles with irq_desc   Thomas Gleixner
• BUG: ARM: MMP and PXA: nr_irqs > NR_IRQS   Thomas Gleixner
• [PATCH] ARM: gic: use handle_fasteoi_irq for SPIs   Thomas Gleixner
• [PATCH] ARM: gic: use handle_fasteoi_irq for SPIs   Thomas Gleixner
• [PATCH] ARM: gic: use handle_fasteoi_irq for SPIs   Thomas Gleixner
• [PATCH] ARM: gic: use handle_fasteoi_irq for SPIs   Thomas Gleixner
• [PATCH] ARM: gic: use handle_fasteoi_irq for SPIs   Thomas Gleixner
• [PATCH] ARM: gic: use handle_fasteoi_irq for SPIs   Thomas Gleixner
• [PATCH 1/2] PRUSS UIO driver support   Thomas Gleixner
• [PATCH 1/2] PRUSS UIO driver support   Thomas Gleixner
• [PATCH 1/2] PRUSS UIO driver support   Thomas Gleixner
• [PATCH v2 13/13] tty: pruss SUART driver   Thomas Gleixner
• [PATCH v2 1/2] PRUSS UIO driver support   Thomas Gleixner
• [PATCH 1/2] PRUSS UIO driver support   Thomas Gleixner
• CLOCK_TICK_RATE, was: Re: [PATCH V4 3/4] ARM: Xilinx: base header files and assembly macros   Thomas Gleixner
• [PATCH v3 1/2] PRUSS UIO driver support   Thomas Gleixner
• [PATCH v3 1/2] PRUSS UIO driver support   Thomas Gleixner
• [PATCH 5/5] ARM: msm: update GPIO chained IRQ handler to use EOI in parent chip   Thomas Gleixner
• [PATCH v4 1/2] PRUSS UIO driver support   Thomas Gleixner
• [PATCH 5/5] ARM: msm: update GPIO chained IRQ handler to use EOI in parent chip   Thomas Gleixner
• [PATCH 4/4] msm: scm: Get cacheline size from CTR   Thomas Gleixner
• [PATCH 4/4] msm: scm: Get cacheline size from CTR   Thomas Gleixner
• [PATCH v5 1/2] PRUSS UIO driver support   Thomas Gleixner
• [PATCH 3/8] Add a mfd IPUv3 driver   Thomas Gleixner
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Thomas Gleixner
• [PATCH 1/4] MX1: Add data structure for SPI   Gwenhael Goavec-Merou
• [PATCH 2/4] MX1: Rename SPI interrupt name and base address.   Gwenhael Goavec-Merou
• [PATCH 3/4] MX1: Register clock for SPI2   Gwenhael Goavec-Merou
• [PATCH 4/4] MX1: Add registration functions for SPI.   Gwenhael Goavec-Merou
• [PATCH] ARM: mm: enforce pageblock alignment when freeing memmap entries at init   Mel Gorman
• [PATCH] ARM: S5P64X0: Modify number of GPIO lines in Bank F   Banajit Goswami
• [PATCH 0/6] ARM: SAMSUNG: Add support PWM backlight   Banajit Goswami
• [PATCH 1/6] ARM: SAMSUNG: Move PWM device definition from plat-s3c24xx to plat-samsung   Banajit Goswami
• [PATCH 2/6] ARM: S3C64XX: Add PWM backlight support on SMDK6410   Banajit Goswami
• [PATCH 3/6] ARM: S5P64X0: Add PWM backlight support on SMDK6440   Banajit Goswami
• [PATCH 4/6] ARM: S5P64X0: Add PWM backlight support on SMDK6450   Banajit Goswami
• [PATCH 5/6] ARM: S5PC100: Add PWM backlight support on SMDKC100   Banajit Goswami
• [PATCH 6/6] ARM: S5PV210: Add PWM backlight support on SMDKV210   Banajit Goswami
• [PATCH v6 0/6] OMAP: McSPI: Hwmod adaptation + runtime conversion   Govindraj.R
• [PATCH v6 1/6] OMAP2420: hwmod data: Add McSPI   Govindraj.R
• [PATCH v6 2/6] OMAP2430: hwmod data: Add McSPI   Govindraj.R
• [PATCH v6 3/6] OMAP3: hwmod data: Add McSPI   Govindraj.R
• [PATCH v6 4/6] OMAP4: hwmod data: Add McSPI   Govindraj.R
• [PATCH v6 5/6] OMAP: devices: Modify McSPI device to adapt to hwmod framework   Govindraj.R
• [PATCH v6 6/6] OMAP: runtime: McSPI driver runtime conversion   Govindraj.R
• [PATCH 0/7] OMAP2+: UART: runtime conversion + cleanup.   Govindraj.R
• [PATCH 1/7] OMAP2+ : hwmod_data: update uart hwmod data.   Govindraj.R
• [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads   Govindraj.R
• [PATCH 3/7] OMAP2+: UART: Remove certain uart calls from sram_idle   Govindraj.R
• [PATCH 4/7] OMAP2+: UART: Remove uart clock handling code serial.c   Govindraj.R
• [PATCH 5/7] Serial: OMAP: add runtime pm support for omap-serial driver   Govindraj.R
• [PATCH 6/7] OMAP: Serial: Allow UART parameters to be configured from board file   Govindraj.R
• [PATCH 7/7] Serial: OMAP2+: Make the RX_TIMEOUT for DMA configurable for each UART   Govindraj.R
• [PATCH v2 01/13] mfd: pruss mfd driver.   Wolfgang Grandegger
• [PATCH v2 01/13] mfd: pruss mfd driver.   Wolfgang Grandegger
• [PATCHv2 1/2] ads7846: OMAP3: Removal of warnings backtrace in bootup   Igor Grinberg
• [PATCHv2 1/2] ads7846: OMAP3: Removal of warnings backtrace in bootup   Igor Grinberg
• [PATCHv2 1/2] ads7846: OMAP3: Removal of warnings backtrace in bootup   Igor Grinberg
• [PATCHv2 1/2] ads7846: OMAP3: Removal of warnings backtrace in bootup   Igor Grinberg
• [PATCH v3 1/2] ads7846: fix gpio free without requesting   Igor Grinberg
• [PATCH v3 2/2] Input: ads7846: use gpio_request_one to configure pendown_gpio   Igor Grinberg
• [PATCH v3 2/2] Input: ads7846: use gpio_request_one to configure pendown_gpio   Igor Grinberg
• [PATCH v3 2/2] Input: ads7846: use gpio_request_one to configure pendown_gpio   Igor Grinberg
• [PATCH v3 2/2] Input: ads7846: use gpio_request_one to configure pendown_gpio   Igor Grinberg
• [PATCH v3 2/2] Input: ads7846: use gpio_request_one to configure pendown_gpio   Igor Grinberg
• [PATCH] Clean up set_pxa_fb_info   Igor Grinberg
• [PXA] A question about PXA310 cpufreq for 806Mhz   Igor Grinberg
• [PATCH] ARM: pxa: support 806MHz operating points for PXA31x processors A2 stepping   Igor Grinberg
• [PATCH] ARM: pxa: support 806MHz operating points for PXA31x processors A2 stepping   Igor Grinberg
• [PATCH] ARM: pxa: support 806MHz operating points for PXA31x processors A2 stepping   Igor Grinberg
• ARM unaligned MMIO access with attribute((packed))   Richard Guenther
• [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL   Shweta Gulati
• [PATCH] OMAP: Fix Memory Leaks in Smartreflex driver   Shweta Gulati
• [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL   Gulati, Shweta
• [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL   Gulati, Shweta
• [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL   Gulati, Shweta
• [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL   Gulati, Shweta
• [PATCH 2/3] OMAP: voltage: move plat/voltage.h to mach-omap2/voltage.h   Gulati, Shweta
• [PATCH 3/3] OMAP2+: voltage: reorganize, split code from data   Gulati, Shweta
• Add dma support for i.MX23/28   Shawn Guo
• [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28   Shawn Guo
• [PATCH 2/5] ARM: mxs: add dma channel definitions   Shawn Guo
• [PATCH 3/5] ARM: mxs: dynamically allocate dma device for mx23/28   Shawn Guo
• [PATCH 4/5] ARM: mxs/mx23evk: add dma device   Shawn Guo
• [PATCH 5/5] ARM: mxs/mx28evk: add dma device   Shawn Guo
• [PATCH 0/7] Add mmc driver for i.MX23/28   Shawn Guo
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH 2/7] ARM: mxs/clock: fix base address missing in name##_set_parent   Shawn Guo
• [PATCH 3/7] ARM: mxs: make ssp error irq definition consistent   Shawn Guo
• [PATCH 4/7] ARM: mxs: dynamically allocate mmc device   Shawn Guo
• [PATCH 5/7] ARM: mxs: fix typo "GPO" in iomux-mx23.h   Shawn Guo
• [PATCH 6/7] ARM: mxs/mx23evk: add mmc device   Shawn Guo
• [PATCH 7/7] ARM: mxs/mx28evk: add mmc device   Shawn Guo
• [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28   Shawn Guo
• [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28   Shawn Guo
• [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28   Shawn Guo
• [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28   Shawn Guo
• [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28   Shawn Guo
• [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28   Shawn Guo
• [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28   Shawn Guo
• [PATCH 3/5] ARM: mxs: dynamically allocate dma device for mx23/28   Shawn Guo
• [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28   Shawn Guo
• [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28   Shawn Guo
• [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28   Shawn Guo
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28   Shawn Guo
• [PATCH v2 0/3] Add dma support for i.MX23/28   Shawn Guo
• [PATCH v2 1/3] dmaengine: mxs-dma: add dma support for i.MX23/28   Shawn Guo
• [PATCH v2 2/3] ARM: mxs: add dma channel definitions   Shawn Guo
• [PATCH v2 3/3] ARM: mxs: add dma device   Shawn Guo
• [PATCH v2 0/7] Add mmc driver for i.MX23/28   Shawn Guo
• [PATCH v2 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH v2 2/7] ARM: mxs/clock: fix base address missing in name##_set_parent   Shawn Guo
• [PATCH v2 3/7] ARM: mxs: make ssp error irq definition consistent   Shawn Guo
• [PATCH v2 4/7] ARM: mxs: dynamically allocate mmc device   Shawn Guo
• [PATCH v2 5/7] ARM: mxs: fix typo "GPO" in iomux-mx23.h   Shawn Guo
• [PATCH v2 6/7] ARM: mxs/mx23evk: add mmc device   Shawn Guo
• [PATCH v2 7/7] ARM: mxs/mx28evk: add mmc device   Shawn Guo
• [PATCH v2 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH v2 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH v2 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH v2 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH v2 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH v2 7/7] ARM: mxs/mx28evk: add mmc device   Shawn Guo
• [PATCH v2 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH v2 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH v2 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH] Add auart devices for mx23 and mx28 evk boards   Shawn Guo
• [PATCH 1/4] ARM: mx23: rename mx23 auart irq definition to align with mx28   Shawn Guo
• [PATCH 2/4] ARM: mx23: dynamically allocate mx23 auart device   Shawn Guo
• [PATCH 3/4] ARM: mxs/mx23evk: add auart device   Shawn Guo
• [PATCH 4/4] ARM: mxs/mx28evk: add auart devices   Shawn Guo
• [PATCH 1/2] video: Add i.MX23/28 framebuffer driver   Shawn Guo
• [PATCH 2/2] ARM i.MX23/28: Add framebuffer device support   Shawn Guo
• [PATCH v2 1/3] dmaengine: mxs-dma: add dma support for i.MX23/28   Shawn Guo
• [PATCH 1/2] video: Add i.MX23/28 framebuffer driver   Shawn Guo
• [PATCH 2/2] ARM i.MX23/28: Add framebuffer device support   Shawn Guo
• [PATCH 2/2] ARM i.MX23/28: Add framebuffer device support   Shawn Guo
• [PATCH 1/2] video: Add i.MX23/28 framebuffer driver   Shawn Guo
• [PATCH v2 1/3] dmaengine: mxs-dma: add dma support for i.MX23/28   Shawn Guo
• [PATCH v3] dmaengine: mxs-dma: add dma support for i.MX23/28   Shawn Guo
• [PATCH v3 0/2] Add dma device for i.MX23/28   Shawn Guo
• [PATCH v3 1/2] ARM: mxs: add dma channel definitions   Shawn Guo
• [PATCH v3 2/2] ARM: mxs: add dma device   Shawn Guo
• [PATCH v3] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH v3] Add mmc device for i.MX23/28   Shawn Guo
• [PATCH v3 1/6] ARM: mxs/clock: fix base address missing in name##_set_parent   Shawn Guo
• [PATCH v3 2/6] ARM: mxs: make ssp error irq definition consistent   Shawn Guo
• [PATCH v3 3/6] ARM: mxs: dynamically allocate mmc device   Shawn Guo
• [PATCH v3 4/6] ARM: mxs: fix typo "GPO" in iomux-mx23.h   Shawn Guo
• [PATCH v3 5/6] ARM: mxs/mx23evk: add mmc device   Shawn Guo
• [PATCH v3 6/6] ARM: mxs/mx28evk: add mmc device   Shawn Guo
• [PATCH 2/2] arm: mxs: add i2c-devices   Shawn Guo
• [PATCH v3] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH v4] ARM: mxs/mx23evk: add mmc device   Shawn Guo
• [PATCH v4] ARM: mxs/mx28evk: add mmc device   Shawn Guo
• [PATCH v3] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH v3] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH v3 5/6] ARM: mxs/mx23evk: add mmc device   Shawn Guo
• [PATCH v3 2/2] ARM: mxs: add dma device   Shawn Guo
• [PATCH v3 2/2] ARM: mxs: add dma device   Shawn Guo
• [PATCH v3 3/6] ARM: mxs: dynamically allocate mmc device   Shawn Guo
• [PATCH v4] ARM: mxs: add dma device   Shawn Guo
• [PATCH v3 2/2] ARM: mxs: add dma device   Shawn Guo
• [PATCH 2/2] ARM i.MX23/28: Add framebuffer device support   Shawn Guo
• [PATCH v3] dmaengine: mxs-dma: add dma support for i.MX23/28   Shawn Guo
• [PATCH] ARM: mx51_defconfig: change CONFIG_LEDS_CLASS 'm' to 'y'   Shawn Guo
• [PATCH] ARM: mx51_defconfig: change CONFIG_LEDS_CLASS 'm' to 'y'   Shawn Guo
• [PATCH V3 0/5] sdhci-esdhc-imx: use gpio for write protection and card detection   Shawn Guo
• [PATCH v3] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Shawn Guo
• [PATCH V3 0/5] sdhci-esdhc-imx: use gpio for write protection and card detection   Shawn Guo
• [PATCH V3 0/5] sdhci-esdhc-imx: use gpio for write protection and card detection   Shawn Guo
• [PATCH v4] dmaengine: mxs-dma: add dma support for i.MX23/28   Shawn Guo
• mxs: name##_set_rate broken   Shawn Guo
• [PATCH v4] dmaengine: mxs-dma: add dma support for i.MX23/28   Shawn Guo
• [PATCH] ARM: mxs: Initial support for Ka-Ro TX28   Shawn Guo
• [PATCH] ARM: mach-imx: mx25_3ds: add write-protect and card-detect for SD   Shawn Guo
• [PATCH v4 3/7] arm/dt: consolidate atags setup into setup_machine_atags   Shawn Guo
• [PATCH v5] dmaengine: mxs-dma: add dma support for i.MX23/28   Shawn Guo
• [PATCH 0/4] Support for device-tree appended to zImage   Shawn Guo
• [PATCH 2/2 v2] dma: ipu_idmac: do not lose valid received data in the irq handler   Anatolij Gustschin
• [PATCH 2/2 v2] dma: ipu_idmac: do not lose valid received data in the irq handler   Anatolij Gustschin
• [PATCH 2/2 v2] dma: ipu_idmac: do not lose valid received data in the irq handler   Anatolij Gustschin
• [PATCH 2/2 v2] dma: ipu_idmac: do not lose valid received data in the irq handler   Anatolij Gustschin
• [PATCH 2/2 v2] dma: ipu_idmac: do not lose valid received data in the irq handler   Anatolij Gustschin
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   Guzman Lugo, Fernando
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   Guzman Lugo, Fernando
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   Guzman Lugo, Fernando
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   Guzman Lugo, Fernando
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   Guzman Lugo, Fernando
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   Guzman Lugo, Fernando
• [PULL REQ] IXP4xx: a couple of fixes   Krzysztof Halasa
• [PATCH] mmci: restrict DMA usage to large, even multiblock transfers   Ulf Hansson
• [PATCH] mmci: restrict DMA usage to large, even multiblock transfers   Ulf Hansson
• i.MX Pull request for -rc   Sascha Hauer
• [PATCH 3/9] Add a mfd IPUv3 driver   Sascha Hauer
• i.MX ehci phy init cleanup   Sascha Hauer
• [PATCH 1/5] ARM i.MX ehci: factor out soc specific functions   Sascha Hauer
• [PATCH 2/5] ARM i.MX ehci: do ehci init in board specific functions   Sascha Hauer
• [PATCH 3/5] USB ehci-mxc: make ahb clock optional on all i.MX SoCs   Sascha Hauer
• [PATCH 4/5] ARM i.MX51/53: register usb phy clock as usb_phy   Sascha Hauer
• [PATCH 5/5] USB ehci-mxc: make phy clock optional on all i.MX SoCs   Sascha Hauer
• [PATCH 3/9] Add a mfd IPUv3 driver   Sascha Hauer
• [patch 3/5] efikamx: add mc13892 support / implement power off   Sascha Hauer
• [patch 1/5] Introduce EFIKA_COMMON   Sascha Hauer
• [patch 5/5] mx51: add support for efika smartbook   Sascha Hauer
• [PATCH 3/5] ARM: mxs: dynamically allocate dma device for mx23/28   Sascha Hauer
• [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28   Sascha Hauer
• i.MX Pull request for -rc   Sascha Hauer
• [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28   Sascha Hauer
• [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28   Sascha Hauer
• [PATCH] i.MX23/28 framebuffer driver   Sascha Hauer
• [PATCH 1/2] video: Add i.MX23/28 framebuffer driver   Sascha Hauer
• [PATCH 2/2] ARM i.MX23/28: Add framebuffer device support   Sascha Hauer
• [PATCH] i.MX23/28 framebuffer driver   Sascha Hauer
• [PATCH 1/2] video: Add i.MX23/28 framebuffer driver   Sascha Hauer
• [PATCH] i.MX51 iomux: Fixes MX51_PAD_UART2_TXD__UART2_TXD declaration   Sascha Hauer
• [PATCH] i.MX51 iomux: Fixes MX51_PAD_UART2_TXD__UART2_TXD declaration   Sascha Hauer
• [PATCH v2 1/2] ARM: IMX5: cpuidle driver   Sascha Hauer
• [PATCH v2 1/2] ARM: IMX5: cpuidle driver   Sascha Hauer
• [PATCH v2 1/2] ARM: IMX5: cpuidle driver   Sascha Hauer
• [PATCH v2] i.MX23/28 Framebuffer driver   Sascha Hauer
• [PATCH 1/2] video: Add i.MX23/28 framebuffer driver   Sascha Hauer
• [PATCH 2/2] ARM i.MX23/28: Add framebuffer device support   Sascha Hauer
• [PATCH v3] Add i.MX51/53 IPU framebuffer support   Sascha Hauer
• [PATCH 1/7] Add a mfd IPUv3 driver   Sascha Hauer
• [PATCH 2/7] fb: export fb mode db table   Sascha Hauer
• [PATCH 3/7] Add i.MX5 framebuffer driver   Sascha Hauer
• [PATCH 4/7] ARM i.MX51: Add IPU device support   Sascha Hauer
• [PATCH 5/7] ARM i.MX5: Allow to increase max zone order   Sascha Hauer
• [PATCH 6/7] ARM i.MX5: increase dma consistent size for IPU support   Sascha Hauer
• [PATCH 7/7] ARM i.MX51 babbage: Add framebuffer support   Sascha Hauer
• [PATCH v2 1/2] ARM: IMX5: cpuidle driver   Sascha Hauer
• [PATCH 1/2] video: Add i.MX23/28 framebuffer driver   Sascha Hauer
• [PATCH 2/2] ARM i.MX23/28: Add framebuffer device support   Sascha Hauer
• [PATCH v2] mxcmmc: use dmaengine API   Sascha Hauer
• [PATCH 2/2] ARM i.MX23/28: Add framebuffer device support   Sascha Hauer
• [PATCH 7/7] ARM i.MX51 babbage: Add framebuffer support   Sascha Hauer
• [PATCH 1/7] Add a mfd IPUv3 driver   Sascha Hauer
• [PATCH 3/7] Add i.MX5 framebuffer driver   Sascha Hauer
• [PATCH RESEND 3/4] ARM: imx53_loco: add i2c device support   Sascha Hauer
• [PATCH] ARM: PXA: Make PXA27x/PXA3xx overlay actually work   Sascha Hauer
• [PATCH v2] mxcmmc: use dmaengine API   Sascha Hauer
• [PATCH 1/2] video: Add i.MX23/28 framebuffer driver   Sascha Hauer
• [PATCH 2/2] ARM i.MX23/28: Add framebuffer device support   Sascha Hauer
• [PATCH] arm: imx: Zero entire imxdma structure   Sascha Hauer
• [PATCH 2/5] ARM: imx51/53: add sdhc3/4 clock   Sascha Hauer
• [PATCH v3 2/2] ARM: mxs: add dma device   Sascha Hauer
• [PATCH v2 2/5] ARM: imx51/53: add sdhc3/4 clock   Sascha Hauer
• [PATCH v3] i.MX23/28 Framebuffer support   Sascha Hauer
• [PATCH 1/2] video: Add i.MX23/28 framebuffer driver   Sascha Hauer
• [PATCH 2/2] ARM i.MX23/28: Add framebuffer device support   Sascha Hauer
• [PATCH] i.MX51 Framebuffer support   Sascha Hauer
• [PATCH 1/8] fb: export fb mode db table   Sascha Hauer
• [PATCH 2/8] ARM i.MX51: setup mipi   Sascha Hauer
• [PATCH 3/8] Add a mfd IPUv3 driver   Sascha Hauer
• [PATCH 4/8] Add i.MX5 framebuffer driver   Sascha Hauer
• [PATCH 5/8] ARM i.MX51: Add IPU device support   Sascha Hauer
• [PATCH 6/8] ARM i.MX5: Allow to increase max zone order   Sascha Hauer
• [PATCH 7/8] ARM i.MX5: increase dma consistent size for IPU support   Sascha Hauer
• [PATCH 8/8] ARM i.MX51 babbage: Add framebuffer support   Sascha Hauer
• [PATCH 6/8] ARM i.MX5: Allow to increase max zone order   Sascha Hauer
• [PATCH] davinci: da850/omap-l138: Add Carrier Link OK check in Davinci RX Handler   Hegde, Vinay
• [PATCH v2] davinci_emac: Add Carrier Link OK check in Davinci RX Handler   Hegde, Vinay
• [PATCH] msm: add single-wire serial bus interface (SSBI) driver   Kenneth Heitke
• [RFC PATCH] msm: sps: Smart Peripheral System (SPS) driver.   Kenneth Heitke
• [PATCH v2 0/2] msm: add single-wire serial bus interface (SSBI) driver   Kenneth Heitke
• [PATCH v2 1/2] MAINTAINERS: Add drivers/msm to MSM subsystem   Kenneth Heitke
• [PATCH v2 2/2] msm: add single-wire serial bus interface (SSBI) driver   Kenneth Heitke
• [RFC PATCH 1/5] RFC: msm: sps: Bus Access Manager (BAM) Hardware driver   Kenneth Heitke
• [RFC PATCH 2/5] RFC: msm: sps: BAM-DMA driver   Kenneth Heitke
• [RFC PATCH 3/5] RFC: msm: sps: Pipe Memory Manager   Kenneth Heitke
• [RFC PATCH 4/5] RFC: msm: sps: Smart Peripheral Subsystem (SPS) Resource Manager   Kenneth Heitke
• [RFC PATCH 5/5] RFC: msm: sps: Smart Peripheral System (SPS) driver.   Kenneth Heitke
• [PATCH] sched: provide scheduler_ipi() callback in response to smp_send_reschedule()   Benjamin Herrenschmidt
• [PATCH] sched: provide scheduler_ipi() callback in response to smp_send_reschedule()   Benjamin Herrenschmidt
• [RFC PATCH 3/5] of: add clock providers   Rob Herring
• [PATCH 01/11] ARM: integrator: use new init_early for clock tree init   Rob Herring
• [PATCH 01/11] ARM: integrator: use new init_early for clock tree init   Rob Herring
• [PATCH 2/2] ARM: iMX5 BBG: add cpuidle driver parameters   Rob Herring
• [PATCH] ARM: amba: make amba_bustype non-static   Rob Herring
• [RFC PATCH] ARM: pmu: add OF match support   Rob Herring
• [RFC PATCH] ARM: pmu: add OF match support   Rob Herring
• [RFC PATCH] ARM: pmu: add OF match support   Rob Herring
• [RFC PATCH] ARM: pmu: add OF match support   Rob Herring
• [PATCH 2/2] ARM: remove the 4x expansion presumption while decompressing the kernel   Rob Herring
• [PATCH 1/2 v1] davinci: support disabling modem status interrupts on SOC UARTS   Kevin Hilman
• [PATCH 1/2] omap3|4: opp: make omapx_opp_init non-static   Kevin Hilman
• [PATCH v2 2/2] OMAP3: beagle xm: enable upto 800MHz OPP   Kevin Hilman
• [PATCH v2] arm: mach-omap2: potential NULL dereference   Kevin Hilman
• [PATCH] OMAP2+: remove unused UART base addresses from omap_globals   Kevin Hilman
• [PATCH 1/6] omap4: powerdomain: Add supported INACTIVE power state   Kevin Hilman
• [PATCH 2/6] omap4: prcm: Fix the CPUx clockdomain offsets   Kevin Hilman
• [PATCH 3/6] omap4: powerdomain: Use intended PWRSTS_* flags instead of values   Kevin Hilman
• [PATCH 1/6] omap4: powerdomain: Add supported INACTIVE power state   Kevin Hilman
• [PATCH v6 0/6] OMAP: McSPI: Hwmod adaptation + runtime conversion   Kevin Hilman
• [PATCH 02/20] mach-omap2: pm: world-writable debugfs timer files   Kevin Hilman
• [PATCH 03/20] mach-omap2: smartreflex: world-writable debugfs voltage files   Kevin Hilman
• [PATCH] i2c: OMAP: fix static suspend vs. runtime suspend   Kevin Hilman
• TI DaVinci support under new maintainer: Sekhar Nori   Kevin Hilman
• [PATCH v2] davinci: spi: move event queue parameter to platform data   Kevin Hilman
• [PATCH v5 0/5] omap: mailbox: hwmod support   Kevin Hilman
• [PATCHv5] omap3: Add basic support for 720MHz part   Kevin Hilman
• [PATCH v5 0/5] omap: mailbox: hwmod support   Kevin Hilman
• [PATCH v2 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Kevin Hilman
• [PATCH v2 5/5] ARM: omap3: Thumb-2 compatibility for sleep34xx.S   Kevin Hilman
• [PATCH] OMAP2/3: PM: remove unnecessary wakeup/sleep dependency clear   Kevin Hilman
• [PATCH v2 5/5] ARM: omap3: Thumb-2 compatibility for sleep34xx.S   Kevin Hilman
• [PATCH v5 0/5] omap: mailbox: hwmod support   Kevin Hilman
• [PATCH 1/2] OMAP2420: mailbox: fix IVA vs DSP IRQ numbering   Kevin Hilman
• [PATCH 2/2] OMAP2+: mailbox: fix lookups for multiple mailboxes   Kevin Hilman
• [PATCH] PM: Allow pm_runtime_suspend() to succeed during system suspend   Kevin Hilman
• [PATCH v5 0/5] omap: mailbox: hwmod support   Kevin Hilman
• [PATCH v4 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Kevin Hilman
• [PATCH] PM: Allow pm_runtime_suspend() to succeed during system suspend   Kevin Hilman
• [PATCH] OMAP1: PM: fix omap1 build   Kevin Hilman
• [PATCH v2] OMAP: PM: DMA: Enable runtime pm   Kevin Hilman
• [PATCH] arm: mach-omap2: smartreflex: fix another memory leak   Kevin Hilman
• [PATCHv2] arm: mach-omap2: smartreflex: fix another memory leak   Kevin Hilman
• [PATCH v4 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Kevin Hilman
• [PATCH RESEND v6 2/4] TI816X: Update common OMAP machine specific sources   Kevin Hilman
• [PATCH RESEND v6 0/4] Introduce support for TI816X processor series   Kevin Hilman
• [PATCH] omap3: pm: Use exported set_cr() instead of a custom one.   Kevin Hilman
• [PATCH v4 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Kevin Hilman
• [PATCHv2] omap2/3: dmtimer: Enable autoidle   Kevin Hilman
• [PATCH] OMAP: Fix Memory Leaks in Smartreflex driver   Kevin Hilman
• [PATCH v7 0/4] Introduce support for TI816X processor series   Kevin Hilman
• [PATCH v2] OMAP: PM: DMA: Enable runtime pm   Kevin Hilman
• [GIT PULL] davinci fixes for 2.6.38-rc7   Kevin Hilman
• [PATCH 5/5] OMAP3EVM: Set TSC wakeup option in pad config   Hiremath, Vaibhav
• [PATCH 1/5] ARM: etm: Don't require clock control   Arve Hjønnevåg
• [PATCH 2/5] ARM: etm: Don't limit tracing to only non-secure code.   Arve Hjønnevåg
• [PATCH 3/5] ARM: etm: Don't trigger another overflow when trying to clear the RAM-full status   Arve Hjønnevåg
• [PATCH 4/5] ARM: etm: Allow range selection   Arve Hjønnevåg
• [PATCH 5/5] ARM: etm: Configure data tracing   Arve Hjønnevåg
• [PATCH 1/5] ARM: etm: Don't require clock control   Arve Hjønnevåg
• [PATCH 1/8] ARM: etm: Don't require clock control   Arve Hjønnevåg
• [PATCH 2/8] ARM: etm: Don't limit tracing to only non-secure code.   Arve Hjønnevåg
• [PATCH 3/8] ARM: etm: Don't try to clear the buffer full status after reading the buffer   Arve Hjønnevåg
• [PATCH 4/8] ARM: etm: Allow range selection   Arve Hjønnevåg
• [PATCH 5/8] ARM: etm: Configure data tracing   Arve Hjønnevåg
• [PATCH 6/8] ARM: etm: Add some missing locks and error checks   Arve Hjønnevåg
• [PATCH 7/8] ARM: etm: Return the entire trace buffer if it is empty after reset   Arve Hjønnevåg
• [PATCH 8/8] ARM: etm: Support multiple ETMs/PTMs.   Arve Hjønnevåg
• [PATCH 4/8] ARM: etm: Allow range selection   Arve Hjønnevåg
• [PATCH 9/9 (originally 8)] ARM: etm: Power down etm(s) when tracing is not enabled   Arve Hjønnevåg
• hibernation yet again ...   Frank Hofmann
• [PATCH v3 2/5] ARM: pm: add generic CPU suspend/resume support   Frank Hofmann
• [PATCH] ARM hibernation support code, again   Frank Hofmann
• [PATCH 0/4] Fix 104MHz support for OMAP OneNAND   Adrian Hunter
• [PATCH 1/4] OMAP: OneNAND: fix 104MHz support   Adrian Hunter
• [PATCH 2/4] OMAP: OneNAND: determine frequency in one place   Adrian Hunter
• [PATCH 3/4] OMAP: OneNAND: let boards determine OneNAND frequency   Adrian Hunter
• [PATCH 4/4] mtd: OneNAND: OMAP2: increase multiblock erase verify timeout   Adrian Hunter
• [PATCH] msm: add single-wire serial bus interface (SSBI) driver   Bryan Huntsman
• [PATCH] MAINTAINERS: Update MSM maintainers   Bryan Huntsman
• [PATCH] MAINTAINERS: Update MSM maintainers   Bryan Huntsman
• [PATCH] MAINTAINERS: Update MSM maintainers   Bryan Huntsman
• [PATCH 2/5] omap: Use inituart to configure the debug serial port based on machine ID   Grazvydas Ignotas
• [PATCHv4 00/13] ARM: add initial support for Picochip picoXcell SoC   Jamie Iles
• [PATCHv4 01/13] picoxcell: add support for picoXcell   Jamie Iles
• [PATCHv4 02/13] picoxcell: add support for AXI bus snoopers   Jamie Iles
• [PATCHv4 03/13] picoxcell: add support for the system timers   Jamie Iles
• [PATCHv4 04/13] picoxcell: add a pin muxing infrastructure   Jamie Iles
• [PATCHv4 05/13] picoxcell: add gpio infrastructure   Jamie Iles
• [PATCHv4 06/13] picoxcell: add support for system clks   Jamie Iles
• [PATCHv4 07/13] picoxcell: add common SoC devices   Jamie Iles
• [PATCHv4 08/13] picoxcell: add cpufreq support   Jamie Iles
• [PATCHv4 09/13] picoxcell: add support for pm   Jamie Iles
• [PATCHv4 10/13] picoxcell: add chained GPIO IRQ handlers   Jamie Iles
• [PATCHv4 11/13] picoxcell: add support for pc3x2 devices   Jamie Iles
• [PATCHv4 12/13] picoxcell: add support for pc3x3 devices   Jamie Iles
• [PATCHv4 13/13] picoxcell: add support for the PC7302 development board   Jamie Iles
• [PATCH 1/2] ARM: QQ2440 machine architecture   Jamie Iles
• [PATCH 2/2] ARM: QQ2440 networking support   Jamie Iles
• [PATCH 2/4] ARM: Xilinx: Adding Xilinx board support   Jamie Iles
• [PATCH 3/4] ARM: Xilinx: Adding timer support to the platform   Jamie Iles
• [PATCH 3/4] ARM: Xilinx: Adding timer support to the platform   Jamie Iles
• [RFC PATCH] picoxcell_fuse: add support for the picoXcell fuse block   Jamie Iles
• [PATCHv4 00/13] ARM: add initial support for Picochip picoXcell SoC   Jamie Iles
• [PATCH] picoxcell_crypto: add support for the picoxcell crypto engines   Jamie Iles
• [RFC 4/5] ARM: P2V: introduce phys_to_virt/virt_to_phys runtime patching   Jamie Iles
• [PATCH] picoxcell_crypto: add support for the picoxcell crypto engines   Jamie Iles
• [RFC] Inter-processor Mailboxes Drivers   Jamie Iles
• [PATCH] picoxcell_crypto: add support for the picoxcell crypto engines   Jamie Iles
• [PATCH V3 1/4] ARM: Xilinx: Adding Xilinx board support   Jamie Iles
• [PATCH V3 2/4] ARM: Xilinx: Adding timer support to the platform   Jamie Iles
• [PATCH V3 3/4] ARM: Xilinx: base header files and assembly macros   Jamie Iles
• [PATCH] ARM: pmu: avoid setting IRQ affinity on UP systems   Jamie Iles
• [RFC PATCH] picoxcell_fuse: add support for the picoXcell fuse block   Jamie Iles
• [PATCH V3 3/4] ARM: Xilinx: base header files and assembly macros   Jamie Iles
• [PATCH V3 3/4] ARM: Xilinx: base header files and assembly macros   Jamie Iles
• [PATCHv5 0/4] ARM: add initial support for Picochip picoXcell SoC   Jamie Iles
• [PATCHv5 1/4] picoxcell: add support for picoXcell   Jamie Iles
• [PATCHv5 2/4] picoxcell: add support for the system timers   Jamie Iles
• [PATCHv5 3/4] picoxcell: add common SoC devices   Jamie Iles
• [PATCHv5 4/4] picoxcell: add support for the PC7302 development board   Jamie Iles
• CPU_V6K build failure in next-20110223   Jamie Iles
• [PATCH 3/8 resend] dw_dmac: call dwc_scan_descriptor from dwc_issue_pending only if active list is empty   Jamie Iles
• [PATCH V4 1/4] ARM: Xilinx: Adding Xilinx board support   Jamie Iles
• [PATCH V4 2/4] ARM: Xilinx: Adding timer support to the platform   Jamie Iles
• [PATCH V4 3/4] ARM: Xilinx: base header files and assembly macros   Jamie Iles
• [PATCH V4 0/4] ARM: Basic Xilinx Support   Jamie Iles
• [PATCH V4 3/4] ARM: Xilinx: base header files and assembly macros   Jamie Iles
• [RFC] Inter-processor Mailboxes Drivers   Meador Inge
• [RFC] Inter-processor Mailboxes Drivers   Meador Inge
• PXA255 and PXA270 in a single binary kernel   Baurzhan Ismagulov
• [PATCH] amba: move to pm ops   Takashi Iwai
• [PATCH] OMAP4: PandaBoard: Adding DVI support   Jan, Sebastien
• [PATCH] ARM: plat-mxc: ehci: Fix inverted logic of OC bit   David Jander
• [PATCH 1/3] IPUv3: Add i.MX53 IPU support   Chen Jie-B02280
• [PATCH 1/4] RTC: Include information about UIE and PIE in RTC driver proc.   Marcelo Roberto Jimenez
• [PATCH] RTC: Include information about UIE and PIE in RTC driver proc.   Marcelo Roberto Jimenez
• [PATCH v2 05/21] ARM: tegra: clock: Disable clocks left on by bootloader   Olof Johansson
• [PATCH v2 05/21] ARM: tegra: clock: Disable clocks left on by bootloader   Olof Johansson
• [PATCH v2 01/21] ARM: tegra: clock: enable clk reset for non-peripheral clocks   Olof Johansson
• [PATCH v2 02/21] ARM: tegra: clock: Don't BUG on changing an enabled PLL   Olof Johansson
• [PATCH v2 03/21] ARM: tegra: clock: Drop debugging   Olof Johansson
• [PATCH v2 04/21] ARM: tegra: clock: Don't use PLL lock bits   Olof Johansson
• [PATCH v2 06/21] ARM: tegra: clock: Initialize clocks that have no enable   Olof Johansson
• [PATCH v2 07/21] ARM: tegra: clock: Drop CPU dvfs   Olof Johansson
• [PATCH v2 08/21] ARM: tegra: clock: Rearrange static clock tables   Olof Johansson
• [PATCH v2 09/21] ARM: tegra: clock: Move unshared clk struct members into union   Olof Johansson
• [PATCH v2 10/21] ARM: tegra: clock: Convert global lock to a lock per clock   Olof Johansson
• [PATCH v2 11/21] ARM: tegra: cpufreq: Take an extra reference to pllx   Olof Johansson
• [PATCH v2 12/21] ARM: tegra: clock: Add shared bus clock type   Olof Johansson
• [PATCH v2 13/21] ARM: tegra: clock: Remove unnecessary uses of #ifdef CONFIG_DEBUG_FS   Olof Johansson
• [PATCH v2 14/21] ARM: tegra: clock: Refcount periph clock enables   Olof Johansson
• [PATCH v2 15/21] ARM: tegra: clock: Round rate before setting rate   Olof Johansson
• [PATCH v2 16/21] ARM: tegra: Add external memory controller driver   Olof Johansson
• [PATCH v2 17/21] ARM: tegra: clocks: Add emc scaling   Olof Johansson
• [PATCH v2 18/21] ARM: tegra: cpufreq: Adjust memory frequency with cpu frequency   Olof Johansson
• [PATCH v2 19/21] ARM: tegra: clock: Add function to set SDMMC tap delay   Olof Johansson
• [PATCH v2 20/21] ARM: tegra: clock: Fix clock issues in suspend   Olof Johansson
• [PATCH v2 21/21] ARM: tegra: clock: Miscellaneous clock updates   Olof Johansson
• [PATCH v2] i2c: tegra: Add i2c support   Olof Johansson
• [PATCH 1/7] ARM: tegra: clock: Refcount periph clock enables   Olof Johansson
• [PATCH 2/7] ARM: tegra: clock: Round rate before setting rate   Olof Johansson
• [PATCH 3/7] ARM: tegra: clock: Check for clk_num == 0   Olof Johansson
• [PATCH 4/7] ARM: tegra: Move tegra_common_init to tegra_init_early   Olof Johansson
• [PATCH 5/7] ARM: tegra: timer: Enable timer and rtc clocks   Olof Johansson
• [PATCH 6/7] ARM: tegra: common: Enable core clocks   Olof Johansson
• [PATCH 7/7] ARM: tegra: clock: Disable clocks left on by bootloader   Olof Johansson
• [PATCH v3 0/6] Tegra board patches   Olof Johansson
• [PATCH 1/6] ARM: tegra: add tegra_gpio_table and tegra_gpio_config   Olof Johansson
• [PATCH 2/6] ARM: tegra: common device resources   Olof Johansson
• [PATCH 3/6] ARM: tegra: remove stale nvidia atag handler   Olof Johansson
• [PATCH 4/6] ARM: tegra: harmony: register sdhci devices   Olof Johansson
• [PATCH 5/6] ARM: tegra: harmony: fix pinmux for MMC slot   Olof Johansson
• [PATCH 6/6] ARM: tegra: add seaboard, wario and kaen boards   Olof Johansson
• [PATCH 5/7] ARM: tegra: timer: Enable timer and rtc clocks   Olof Johansson
• [PATCH 7/7] ARM: tegra: clock: Disable clocks left on by bootloader   Olof Johansson
• [PATCH 1/6] ARM: tegra: add tegra_gpio_table and tegra_gpio_config   Olof Johansson
• [PATCH v2 5/5] mmc: sdhci-esdhc: enable esdhc on imx53   Olof Johansson
• [PATCH 4/6] ARM: tegra: harmony: register sdhci devices   Olof Johansson
• [PATCH 1/6] ARM: tegra: add tegra_gpio_table and tegra_gpio_config   Olof Johansson
• [GIT PULL] Please pull tegra board updates for .39   Olof Johansson
• [PATCH] ARM: tegra: Hide EMC scaling config behind ARCH_TEGRA   Olof Johansson
• [PATCH 1/6] ARM: tegra: add tegra_gpio_table and tegra_gpio_config   Olof Johansson
• [PATCH 6/6] ARM: tegra: add seaboard, wario and kaen boards   Olof Johansson
• Problem with "ARM: tegra: Move tegra_common_init to tegra_init_early"   Olof Johansson
• [PATCH v2] ARM: Tegra: Make tegra_dma_init a postcore_initcall   Olof Johansson
• [PATCH 5/5] ARM: Tegra: Enable Harmony audio support   Olof Johansson
• [GIT PULL] Please pull tegra board updates for .39   Olof Johansson
• [PATCH 5/5] ARM: Tegra: Enable Harmony audio support   Olof Johansson
• [PATCH 5/5] ARM: Tegra: Enable Harmony audio support   Olof Johansson
• [PATCH 5/5] ARM: Tegra: Enable Harmony audio support   Olof Johansson
• [PATCH 5/5] ARM: Tegra: Enable Harmony audio support   Olof Johansson
• [PATCH] RFC: ux500: add PMU resources   Lee Jones
• [PATCH] RFC: ux500: add PMU resources   Lee Jones
• [PATCH] RFC: ux500: add PMU resources   Lee Jones
• [PATCH][trivial] ARM, OMAP, timer: Remove duplicate inclusion of linux/sched.h from arch/arm/mach-omap1/time.c   Jesper Juhl
• [PATCH] OMAP4:Fix -EINVAL for vana, vcxio, vdac   Balaji T K
• [PATCH] OMAP2: add regulator for MMC1   Balaji T K
• [PATCH] ARM: errata: pl310 cache sync operation may be faulty   Srinidhi KASAGAR
• [PATCH] ARM: errata: pl310 cache sync operation may be faulty   Srinidhi KASAGAR
• [PATCH] ARM: errata: pl310 cache sync operation may be faulty   Srinidhi KASAGAR
• [PATCH] ARM: errata: pl310 cache sync operation may be faulty   Srinidhi KASAGAR
• [PATCH v4 1/4] drivers: hwspinlock: add framework   Greg KH
• [PATCH 0/3] hvc_dcc cleanups and fixes   Greg KH
• [PATCH 0/3] hvc_dcc cleanups and fixes   Greg KH
• [PATCH] s3c2410_udc: Add handling for S3C244X dual-packet mode   Greg KH
• [PATCH 1/2] staging: msm: Use explicit GPLv2 licenses   Greg KH
• [PATCH 1/2] PRUSS UIO driver support   Greg KH
• [PATCH v2 13/13] tty: pruss SUART driver   Greg KH
• [PATCH v2 13/13] tty: pruss SUART driver   Greg KH
• [PATCH v2 13/13] tty: pruss SUART driver   Greg KH
• [PATCH v2 2/2] msm: add single-wire serial bus interface (SSBI) driver   Greg KH
• [PATCH v2 2/2] msm: add single-wire serial bus interface (SSBI) driver   Greg KH
• [PATCH] ARM: SAMSUNG: Removing dependency on CONFIG_PM_DEBUG for clock debugging   Amit Kachhap
• [PATCH] ARM: SAMSUNG: Removing dependency on CONFIG_PM_DEBUG for clock debugging   Amit Daniel Kachhap
• [PATCH v3 2/2] Input: ads7846: use gpio_request_one to configure pendown_gpio   Kishore Kadiyala
• [PATCH] OMAP2: add regulator for MMC1   Kishore Kadiyala
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Hema Kalliguddi
• [patch-v2.6.39 5/7] AM35xx: hwmod data: Add USBOTG   Hema Kalliguddi
• [PATCH] ARM: EXYNOS4: Adds Samsung NURI board support   Minkyu Kang
• [PATCH] ARM: EXYNOS4: Adds Samsung NURI board support   Minkyu Kang
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Saravana Kannan
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Saravana Kannan
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Saravana Kannan
• [RFC, PATCH 3/3] clk: add warnings for incorrect enable/prepare semantics   Saravana Kannan
• [RFC,PATCH 1/3] Add a common struct clk   Saravana Kannan
• [RFC,PATCH 2/3] clk: Generic support for fixed-rate clocks   Saravana Kannan
• [RFC,PATCH 1/3] Add a common struct clk   Saravana Kannan
• [RFC,PATCH 2/3] clk: Generic support for fixed-rate clocks   Saravana Kannan
• [RFC,PATCH 1/3] Add a common struct clk   Saravana Kannan
• [RFC,PATCH 1/3] Add a common struct clk   Saravana Kannan
• [PATCH] wip: convert imx27 to common struct clk   Saravana Kannan
• [PATCH 2/4] msm: scm: Fix improper register assignment   Saravana Kannan
• [PATCH] msm: gpiomux: Remove GPIOMUX_VALID and merge config enums   Saravana Kannan
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Saravana Kannan
• [PATCH] ARM: Improve the L2 cache performance when PL310 is used   Srinidhi Kasagar
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Jeremy Kerr
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Jeremy Kerr
• [RFC,PATCH 0/3] Common struct clk implementation, v11   Jeremy Kerr
• [RFC,PATCH 1/3] Add a common struct clk   Jeremy Kerr
• [RFC,PATCH 2/3] clk: Generic support for fixed-rate clocks   Jeremy Kerr
• [RFC, PATCH 3/3] clk: add warnings for incorrect enable/prepare semantics   Jeremy Kerr
• [RFC, PATCH 3/3] clk: add warnings for incorrect enable/prepare semantics   Jeremy Kerr
• [RFC, PATCH 3/3] clk: add warnings for incorrect enable/prepare semantics   Jeremy Kerr
• [RFC,PATCH 1/3] Add a common struct clk   Jeremy Kerr
• [RFC,PATCH 1/3] Add a common struct clk   Jeremy Kerr
• [RFC,PATCH 1/3] Add a common struct clk   Jeremy Kerr
• [RFC,PATCH 1/3] Add a common struct clk   Jeremy Kerr
• [RFC,PATCH 0/3] Common struct clk implementation, v12   Jeremy Kerr
• [RFC,PATCH 1/3] Add a common struct clk   Jeremy Kerr
• [RFC,PATCH 2/3] clk: Generic support for fixed-rate clocks   Jeremy Kerr
• [RFC, PATCH 3/3] clk: add warnings for incorrect enable/prepare semantics   Jeremy Kerr
• [RFC,PATCH 1/3] Add a common struct clk   Jeremy Kerr
• [RFC,PATCH 2/3] clk: Generic support for fixed-rate clocks   Jeremy Kerr
• [RFC, PATCH 3/3] clk: add warnings for incorrect enable/prepare semantics   Jeremy Kerr
• [RFC,PATCH 1/3] Add a common struct clk   Jeremy Kerr
• [RFC,PATCH 2/3] clk: Generic support for fixed-rate clocks   Jeremy Kerr
• [RFC,PATCH 1/3] Add a common struct clk   Jeremy Kerr
• [RFC,PATCH 1/3] Add a common struct clk   Jeremy Kerr
• [PATCH 0/2] Common struct clk implementation, v13   Jeremy Kerr
• [PATCH 1/2] Add a common struct clk   Jeremy Kerr
• [PATCH 2/2] clk: Generic support for fixed-rate clocks   Jeremy Kerr
• [PATCH 2/2] clk: Generic support for fixed-rate clocks   Jeremy Kerr
• [PATCH 1/2] Add a common struct clk   Jeremy Kerr
• [PATCH] ARM: PXA: Make PXA27x/PXA3xx overlay actually work   Vasily Khoruzhick
• PXA270 Random Hangs at Low Core Freq   Vasily Khoruzhick
• [PATCH RESEND] s3c2410_udc: Add handling for S3C244X dual-packet mode   Vasily Khoruzhick
• [PATCH] ARM: PXA: Make PXA27x/PXA3xx overlay actually work   Vasily Khoruzhick
• [PATCH] ARM: PXA: Make PXA27x/PXA3xx overlay actually work   Vasily Khoruzhick
• [PATCH] ARM: PXA: Make PXA27x/PXA3xx overlay actually work   Vasily Khoruzhick
• [PATCH] ARM: PXA: Make PXA27x/PXA3xx overlay actually work   Vasily Khoruzhick
• [PATCH 1/2] ARM: PXA: PXAFB: Fix double-free issue.   Vasily Khoruzhick
• [PATCH 2/2] ARM: PXA: PXAFB: fix plane Z-ordering problem   Vasily Khoruzhick
• [PATCH 1/2] ARM: PXA: PXAFB: Fix double-free issue.   Vasily Khoruzhick
• [PATCH v2 1/3] ARM: PXA: PXAFB: Fix double-free issue   Vasily Khoruzhick
• [PATCH v2 2/3] ARM: PXA: PXAFB: Fix plane Z-ordering problem   Vasily Khoruzhick
• [PATCH v2 3/3] ARM: PXA: PXAFB: Fix typo in ypos assignment   Vasily Khoruzhick
• [PATCH v2 1/3] ARM: PXA: PXAFB: Fix double-free issue   Vasily Khoruzhick
• [RFC] Generic CPU save/restore PM support   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Ensure struct sys_device is declared in plat/pm.h   Kukjin Kim
• [PATCH V3] ARM: S5PV310: Implement kernel timers using MCT   Kukjin Kim
• [GIT PULL] Samsung fixes for 2.6.38-rc5   Kukjin Kim
• [PATCH v3 2/5] ARM: pm: add generic CPU suspend/resume support   Kukjin Kim
• [PATCH 0/11] ARM: EXYNOS4: Change ARCH name, ARCH_EXYNOS4 from ARCH_S5PV310   Kukjin Kim
• [PATCH 01/11] ARM: EXYNOS4: Add EXYNOS4 CPU initialization support   Kukjin Kim
• [PATCH 02/11] ARM: EXYNOS4: Update Clock part   Kukjin Kim
• [PATCH 03/11] ARM: EXYNOS4: Update IRQ part   Kukjin Kim
• [PATCH 04/11] ARM: EXYNOS4: Update Timer part   Kukjin Kim
• [PATCH 05/11] ARM: EXYNOS4: Update device support   Kukjin Kim
• [PATCH 06/11] ARM: EXYNOS4: Moved board support files   Kukjin Kim
• [PATCH 07/11] ARM: EXYNOS4: Update Kconfig and Makefile for the new ARCH_EXYNOS4   Kukjin Kim
• [PATCH 08/11] ARM: exynos4_defconfig: Add defconfig for EXYNOS4   Kukjin Kim
• [PATCH 09/11] mtd: OneNAND: Change dependency of ARCH_EXYNOS4   Kukjin Kim
• [PATCH 10/11] ASoC: Change dependency of ARCH_EXYNOS4   Kukjin Kim
• [PATCH 11/11] tty: Change dependency of ARCH_EXYNOS4   Kukjin Kim
• [PATCH v2] ARM: S5PV210: Add GONI board setup for CIF camera support   Kukjin Kim
• [PATCH v2] ARM: S5PV210: Add GONI board setup for CIF camera support   Kukjin Kim
• [RFC 1/5] ARM: P2V: separate PHYS_OFFSET from platform definitions   Kukjin Kim
• [RFC 2/5] ARM: P2V: avoid initializers and assembly using PHYS_OFFSET   Kukjin Kim
• [PATCH 5/6] ARM: pm: convert samsung platforms to generic suspend/resume support   Kukjin Kim
• [PATCH 5/6] ARM: pm: convert samsung platforms to generic suspend/resume support   Kukjin Kim
• [PATCH 5/6] ARM: pm: convert samsung platforms to generic suspend/resume support   Kukjin Kim
• [PATCH 0/11] ARM: EXYNOS4: Change ARCH name, ARCH_EXYNOS4 from ARCH_S5PV310   Kukjin Kim
• [PATCH 0/2] ARM: Update number of VIC for S5P SoCs   Kukjin Kim
• [PATCH RE-SEND 1/2] ARM: Update number of VIC for S5PV210   Kukjin Kim
• [PATCH RE-SEND 2/2] ARM: Update number of VIC for S5P6442 and S5PC100   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Drop exporting s3c24xx_ts_set_platdata   Kukjin Kim
• [PATCH for 2.6.38] ARM: S5PC110: fix regulator names   Kukjin Kim
• [PATCH for 2.6.38] ARM: S5PC110: update max8998_platform_data   Kukjin Kim
• [GIT PULL] Samsung fixes for 2.6.38-rc6   Kukjin Kim
• [PATCH 01/09] ARM: s3c2442: gta02: Fix usage gpio bank j pin definitions   Kukjin Kim
• [PATCH 2/6] ARM: pm: add generic CPU suspend/resume support   Kukjin Kim
• [PATCH 1/5] ARM: S5PV310: Add missing GPYx banks.   Kukjin Kim
• [PATCH] ARM: EXYNOS4: Fix wrong constants in the hotplug assembly code.   Kukjin Kim
• [PATCH] ARM: EXYNOS4: Fix wrong constants in the hotplug assembly code.   Kukjin Kim
• [PATCH 2/5] ARM: Samsung: cleanup S5P gpio interrupt code   Kukjin Kim
• [PATCH 1/2] ARM: S5PC110: disable unused power regulators on Goni board   Kukjin Kim
• [PATCH 2/2] ARM: S5PC110: add power consumers for hsotg for Goni board   Kukjin Kim
• [PATCH 1/2] ARM: S5PC110: disable unused power regulators on Goni board   Kukjin Kim
• [PATCH 1/3] ARM: EXYNOS4: Add SYSTIMER IO Address mapping for MCT   Kukjin Kim
• [PATCH 2/3] ARM: EXYNOS4: Add irq definition for kernel global timer   Kukjin Kim
• [PATCH V4] ARM: EXYNOS4: Implement kernel timers using MCT   Kukjin Kim
• [PATCH 09/09] ARM: s3c2440: gta02: Add touchscreen support   Kukjin Kim
• [PATCH 08/09] ARM: s3c2440: gta02: Request usb pullup pin before using it   Kukjin Kim
• [PATCH 06/09] ARM: s3c2440: gta02: Remove state_mem constraints for the pcf50633 regulators   Kukjin Kim
• [PATCH 04/09] ARM: s3c2440: gta02: Select missing S3C_DEV_USB_HOST   Kukjin Kim
• [PATCH 03/09] ARM: s3c2440: gta02: Add button support   Kukjin Kim
• [PATCH 02/09] ARM: s3c2440: gta02: Register PCM device   Kukjin Kim
• [PATCH 01/09] ARM: s3c2442: gta02: Fix usage gpio bank j pin definitions   Kukjin Kim
• [PATCH v2 07/09] ARM: s3c2440: gta02: Call regulator_has_full_constraints   Kukjin Kim
• [PATCH 05/09] ARM: s3c2440: gta02: Fix regulator valid_modes_ops   Kukjin Kim
• [PATCH] ARM: EXYNOS4: Adds Samsung NURI board support   Kukjin Kim
• [PATCH] ARM: S5P64X0: Modify number of GPIO lines in Bank F   Kukjin Kim
• [PATCH] ARM: EXYNOS4: Adds Samsung NURI board support   Kukjin Kim
• [PATCH 1/2] drivers/watchdog/s3c2410_wdt.c: Convert release_resource to release_region/release_mem_region   Kukjin Kim
• [PATCH 08/09] ARM: s3c2440: gta02: Request usb pullup pin before using it   Kukjin Kim
• [PATCH 01/09] ARM: s3c2442: gta02: Fix usage gpio bank j pin definitions   Kukjin Kim
• [PATCH 0/6] ARM: SAMSUNG: Add support PWM backlight   Kukjin Kim
• [PATCH 09/09] ARM: s3c2440: gta02: Add touchscreen support   Kukjin Kim
• [PATCH 06/09] ARM: s3c2440: gta02: Remove state_mem constraints for the pcf50633 regulators   Kukjin Kim
• [PATCH] ARM: EXYNOS4: Adds Samsung NURI board support   Kukjin Kim
• [PATCH v2 09/09] ARM: s3c2440: gta02: Add touchscreen support   Kukjin Kim
• [PATCH 0/11] ARM: EXYNOS4: Change ARCH name, ARCH_EXYNOS4 from ARCH_S5PV310   Sangbeom Kim
• [PATCH 0/11] ARM: EXYNOS4: Change ARCH name, ARCH_EXYNOS4 from ARCH_S5PV310   Sangbeom Kim
• [PATCH 0/3] ARM: S5P: Add high resolution timer support   Sangbeom Kim
• [PATCH 1/3] ARM: S5P: Add s5p_timer support for HRT   Sangbeom Kim
• [PATCH 2/3] ARM: S5P: Update machine initialization for HRT   Sangbeom Kim
• [PATCH 3/3] ARM: S5P: Update defconfig for HRT support   Sangbeom Kim
• [PATCH 1/3] ARM: S5P: Add s5p_timer support for HRT   Sangbeom Kim
• [PATCH 2/3] ARM: S5P: Update machine initialization for HRT   Sangbeom Kim
• [PATCH 0/2] ARM: mxs: add flexcan support   Marc Kleine-Budde
• [PATCH 1/2] ARM: mxs: adjust flexcan clock definition   Marc Kleine-Budde
• [PATCH 2/2] ARM: mxs: dynamically register flexcan devices for mx28   Marc Kleine-Budde
• [PATCH] mx31: add support for the bugbase 1.3 from buglabs   Marc Kleine-Budde
• [PATCH] mx31: add support for the bugbase 1.3 from buglabs   Marc Kleine-Budde
• [PATCH v2 09/13] can: pruss CAN driver.   Marc Kleine-Budde
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Uwe Kleine-König
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Uwe Kleine-König
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Uwe Kleine-König
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Uwe Kleine-König
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Uwe Kleine-König
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Uwe Kleine-König
• [PATCH 3/9] Add a mfd IPUv3 driver   Uwe Kleine-König
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Uwe Kleine-König
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Uwe Kleine-König
• i.MX & IRQF_ONESHOT   Uwe Kleine-König
• [patch 6/8] arm: ns9xxx: Remove private irq flow handler   Uwe Kleine-König
• [PATCH] ARM: omap1/nokia770: mark some functions __init   Uwe Kleine-König
• Message awaiting admin approval...   Uwe Kleine-König
• [PATCH 15/19] mc13xxx: mfd_cell is now implicitly available to drivers   Uwe Kleine-König
• [PATCH 15/19] mc13xxx: mfd_cell is now implicitly available to drivers   Uwe Kleine-König
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Uwe Kleine-König
• [RFC,PATCH 1/3] Add a common struct clk   Uwe Kleine-König
• [RFC, PATCH 3/3] clk: add warnings for incorrect enable/prepare semantics   Uwe Kleine-König
• [RFC,PATCH 1/3] Add a common struct clk   Uwe Kleine-König
• [PATCH 1/4] ARM: imx: use .init_early to initialize cpu type and reset address   Uwe Kleine-König
• [PATCH 2/4] ARM: mx3: use .init_early to initialize cpu type, reset address and iomuxer   Uwe Kleine-König
• [PATCH 3/4] ARM: mx5: use .init_early to initialize cpu type, reset address and iomuxer   Uwe Kleine-König
• [PATCH 4/4] ARM: mxc91231: use .init_early to initialize cpu type   Uwe Kleine-König
• [RFC 2/5] ARM: P2V: avoid initializers and assembly using PHYS_OFFSET   Uwe Kleine-König
• [RFC 2/5] ARM: P2V: avoid initializers and assembly using PHYS_OFFSET   Uwe Kleine-König
• [PATCH] arm: Use generic accessor in irq_set_flags()   Uwe Kleine-König
• [PATCH] ARM: omap1/nokia770: mark some functions __init   Uwe Kleine-König
• [PATCH] spi/imx: select master mode for all channels   Uwe Kleine-König
• [PATCH] ARM: imx/eukrea_mbimx27: fix compile warnings about unused variables   Uwe Kleine-König
• [RFC,PATCH 1/3] Add a common struct clk   Uwe Kleine-König
• [PATCH] ARM: imx/eukrea_mbimx27: fix compile warnings about unused variables   Uwe Kleine-König
• [RFC,PATCH 1/3] Add a common struct clk   Uwe Kleine-König
• [PATCH 1/4] ARM: omap1/nokia770: mark some functions __init   Uwe Kleine-König
• [PATCH 2/4] ARM: omap: move omap_get_config et al. to .init.text   Uwe Kleine-König
• [PATCH 3/4] ARM: omap: move omap_board_config_kernel to .init.data   Uwe Kleine-König
• [PATCH 4/4] wip: fix section mismatches in omap1_defconfig   Uwe Kleine-König
• Machine ID question   Uwe Kleine-König
• [PATCH] ARM: mx3/mx31_3ds: fix compiler warning without CONFIG_USB_ULPI   Uwe Kleine-König
• [PATCH] ARM: imx+mx3: convert to mc13xxx MFD   Uwe Kleine-König
• [PATCH] ARM: imx/eukrea_mbimx27: fix compile warnings about unused variables   Uwe Kleine-König
• [RFC,PATCH 1/3] Add a common struct clk   Uwe Kleine-König
• [PATCH] mx31: add support for the bugbase 1.3 from buglabs   Uwe Kleine-König
• [PATCH 1/3] ARM: mx3+mx5: rename to ${machine}_init   Uwe Kleine-König
• [PATCH 2/3] ARM: mx3: remove some useless comments   Uwe Kleine-König
• [PATCH 3/3] ARM: mx3/mx31ads: fix comments of irq callbacks   Uwe Kleine-König
• [PATCH 1/3 v2] ARM: mx3+mx5: rename mxc_board_init to ${machine}_init   Uwe Kleine-König
• [PATCH 1/2] arm: mx50_rdp: add fec support   Uwe Kleine-König
• [PATCH] mx31: add support for the bugbase 1.3 from buglabs   Uwe Kleine-König
• [PATCH] mx31: add support for the bugbase 1.3 from buglabs   Uwe Kleine-König
• [PATCH] mx31: add support for the bugbase 1.3 from buglabs   Uwe Kleine-König
• [PATCHv3] mx31: add support for the bugbase 1.3 from buglabs   Uwe Kleine-König
• [PATCH] i2c-pxa: fix unbinding/rebinding of the device   Uwe Kleine-König
• [PATCH 16/17] mc13xxx: mfd_cell is now implicitly available to drivers   Uwe Kleine-König
• [PATCH 16/17] mc13xxx: mfd_cell is now implicitly available to drivers   Uwe Kleine-König
• [PATCH] ARM: reenable DEBUG_SECTION_MISMATCH   Uwe Kleine-König
• [PATCH] ARM: reenable DEBUG_SECTION_MISMATCH   Uwe Kleine-König
• [PATCH 16/17] mc13xxx: mfd_cell is now implicitly available to drivers   Uwe Kleine-König
• [PATCH 2/2] ARM: mach-mx5: Add watchdog support for MX53 based boards   Uwe Kleine-König
• [PATCH v2 2/2] ARM: mach-mx5: Add watchdog support for MX53 based boards   Uwe Kleine-König
• [PATCHv3] mx31: add support for the bugbase 1.3 from buglabs   Uwe Kleine-König
• [PATCH 16/17] mc13xxx: mfd_cell is now implicitly available to drivers   Uwe Kleine-König
• [PATCH RESEND 3/4] ARM: imx53_loco: add i2c device support   Uwe Kleine-König
• [RFC/PATCH] OMAP: Fix section mismatch   Uwe Kleine-König
• [PATCH] kbuild: reenable section mismatch analysis   Uwe Kleine-König
• [PATCH] arm/mach-stmp3xxx: remove headers for DUART   Uwe Kleine-König
• [PATCH 2/2] arm: mxs: add i2c-devices   Uwe Kleine-König
• [PATCH 0/5] my imx patches for 2.6.39   Uwe Kleine-König
• [PATCH 1/5] ARM: mxs: free dma_mask in error path   Uwe Kleine-König
• [PATCH 2/5] ARM: mxc: free dma_mask in error path   Uwe Kleine-König
• [PATCH 3/5] ARM: mxs: add a dma mask to fec devices   Uwe Kleine-König
• [PATCH 4/5] ARM: mxc: add a dma mask to fec devices   Uwe Kleine-König
• [PATCH 5/5] ARM: mxs: Add pwm clocks and device registration   Uwe Kleine-König
• [PATCH] mx31: add support for the bugbase 1.3 from buglabs   Uwe Kleine-König
• [PATCH v3 2/2] ARM: mxs: add dma device   Uwe Kleine-König
• [PATCH v3 2/6] ARM: mxs: make ssp error irq definition consistent   Uwe Kleine-König
• [PATCH v3 3/6] ARM: mxs: dynamically allocate mmc device   Uwe Kleine-König
• [PATCH v3 5/6] ARM: mxs/mx23evk: add mmc device   Uwe Kleine-König
• dma_declare_coherent_memory() again.   Uwe Kleine-König
• [PATCH v4 2/4] mc13xxx-core: Kconfig: Config menu driven by specific IC type   Uwe Kleine-König
• [PATCH v3 2/2] ARM: mxs: add dma device   Uwe Kleine-König
• [PATCH v3 3/6] ARM: mxs: dynamically allocate mmc device   Uwe Kleine-König
• [PATCH] ARM: Fix compile after delay page freeing patch   Uwe Kleine-König
• [PATCH] ARM: Fix compile after delay page freeing patch   Uwe Kleine-König
• [PATCH 1/2] Add a common struct clk   Uwe Kleine-König
• [PATCH] ARM: fix build failure   Uwe Kleine-König
• [PATCH] ARM: fix build failure   Uwe Kleine-König
• [PATCH] wip: convert imx27 to common struct clk   Uwe Kleine-König
• Build failure on i.MX25 [Was: [PATCH] ARM: imx/mach-mx25_3ds: Use IMX_GPIO_NR instead of hard-coded values]   Uwe Kleine-König
• [PATCH] wip: convert imx27 to common struct clk   Uwe Kleine-König
• [PATCH] ARM: mx51_defconfig: change CONFIG_LEDS_CLASS 'm' to 'y'   Uwe Kleine-König
• [PATCH 0/5] my imx patches for 2.6.39   Uwe Kleine-König
• [PATCH] ARM: mx51_defconfig: enable various options   Uwe Kleine-König
• mxs: name##_set_rate broken   Uwe Kleine-König
• [PATCH 0/5] my imx patches for 2.6.39   Uwe Kleine-König
• [PATCH] ARM: mxs: Initial support for Ka-Ro TX28   Uwe Kleine-König
• [PATCH] ARM: mxs: Initial support for Ka-Ro TX28   Uwe Kleine-König
• [PATCH v3 4/6] ARM: mxs: fix typo "GPO" in iomux-mx23.h   Uwe Kleine-König
• [PATCH 2/2] ARM: imx35: fix trivial copy/paste error   Uwe Kleine-König
• [patch 2/2] efika mx/sb: enable watchdog   Uwe Kleine-König
• [PATCH 1/2] ARM: imx: use imx_add_gpio_keys to register "gpio-keys" devices   Uwe Kleine-König
• [PATCH 2/2] ARM: imx: remove #includes already available from devices-common.h   Uwe Kleine-König
• [PATCH 1/2] PRUSS UIO driver support   Hans J. Koch
• [PATCH 1/2] PRUSS UIO driver support   Hans J. Koch
• [PATCH v2 1/2] PRUSS UIO driver support   Hans J. Koch
• [PATCH 1/2] PRUSS UIO driver support   Hans J. Koch
• [PATCH v3 1/2] PRUSS UIO driver support   Hans J. Koch
• [PATCH v4 2/2] Defines DA850/AM18xx/OMAPL1-38 SOC resources used by PRUSS UIO driver   Hans J. Koch
• [PATCH v6 1/1] PRUSS UIO driver support   Hans J. Koch
• [PATCH] OMAP4: PandaBoard: Adding DVI support   Koen Kooi
• [PATCH] OMAP4: PandaBoard: Adding DVI support   Koen Kooi
• [PATCH]drivers:dma:coh901318.c Change initate to initiate.   Jiri Kosina
• [PATCH] arm: mach-omap2: board-rm680: fix rm680_vemmc regulator constraints   Aaro Koskinen
• [PATCH] arm: mach-omap2: smartreflex: fix another memory leak   Aaro Koskinen
• [PATCHv2] arm: mach-omap2: smartreflex: fix another memory leak   Aaro Koskinen
• [PATCHv2] arm: mach-omap2: smartreflex: fix another memory leak   Aaro Koskinen
• [PATCH v3] dmaengine: mxs-dma: add dma support for i.MX23/28   Koul, Vinod
• [PATCH v3] dmaengine: mxs-dma: add dma support for i.MX23/28   Koul, Vinod
• [PATCH v3] dmaengine: mxs-dma: add dma support for i.MX23/28   Koul, Vinod
• [PATCH v4] dmaengine: mxs-dma: add dma support for i.MX23/28   Koul, Vinod
• [PATCH] OMAP4:Fix -EINVAL for vana, vcxio, vdac   Krishnamoorthy, Balaji T
• [PATCHv2] omap2/3: dmtimer: Enable autoidle   Tero Kristo
• [PATCH 2/2] ARM: iMX5 BBG: add cpuidle driver parameters   Amit Kucheria
• [PATCH 2/2] ARM: iMX5 BBG: add cpuidle driver parameters   Amit Kucheria
• [PATCH] ARM: SAMSUNG: Removing dependency on CONFIG_PM_DEBUG for clock debugging   Amit Kucheria
• [PATCH] ARM: SAMSUNG: Removing dependency on CONFIG_PM_DEBUG for clock debugging   Amit Kucheria
• [PATCH 00/20] world-writable files in sysfs and debugfs   Vasiliy Kulikov
• [PATCH 01/20] mach-omap2: mux: world-writable debugfs files   Vasiliy Kulikov
• [PATCH 02/20] mach-omap2: pm: world-writable debugfs timer files   Vasiliy Kulikov
• [PATCH 03/20] mach-omap2: smartreflex: world-writable debugfs voltage files   Vasiliy Kulikov
• [PATCH 04/20] mach-ux500: mbox-db5500: world-writable sysfs fifo file   Vasiliy Kulikov
• [PATCH 08/20] mfd: ab3100: world-writable debugfs *_priv files   Vasiliy Kulikov
• [PATCH 09/20] mfd: ab3500: world-writable debugfs register-* files   Vasiliy Kulikov
• [PATCH 10/20] mfd: ab8500: world-writable debugfs register-* files   Vasiliy Kulikov
• [PATCH 00/20] world-writable files in sysfs and debugfs   Vasiliy Kulikov
• [PATCH V5 36/63] ST SPEAr : EMI (Extrenal Memory Interface) controller driver   Vipin Kumar
• [PATCH V5 36/63] ST SPEAr : EMI (Extrenal Memory Interface) controller driver   Vipin Kumar
• [PATCH V4 resend] rtc: Adding support for spear rtc   Viresh Kumar
• [PATCH V6 13/63] ST SPEAr: Updating Clock Support   Viresh Kumar
• [PATCH 0/8 resend] dw_dmac: Extending support & minor fixes   Viresh Kumar
• [PATCH 1/8 resend] dw_dmac: Remove compilation dependency from AVR32   Viresh Kumar
• [PATCH 2/8 resend] dw_dmac: Move single descriptor from dwc->queue to dwc->active_list in dwc_complete_all   Viresh Kumar
• [PATCH 3/8 resend] dw_dmac: call dwc_scan_descriptor from dwc_issue_pending only if active list is empty   Viresh Kumar
• [PATCH 4/8 resend] dw_dmac: calling dwc_scan_descriptors from dwc_tx_status() after taking lock   Viresh Kumar
• [PATCH 5/8 resend] dw_dmac: adding support for 64 bit access width for memcpy xfers   Viresh Kumar
• [PATCH 6/8 resend] dw_dmac: Mark all tx_descriptors with DMA_CRTL_ACK after xfer finish   Viresh Kumar
• [PATCH 7/8 resend] dw_dmac.c: Pass Channel Allocation Order from platform_data   Viresh Kumar
• [PATCH 8/8 resend] dw_dmac.c: Pass Channel Priority from platform_data   Viresh Kumar
• [RFC] device.h: add device_set_platdata routine   Viresh Kumar
• newbie question: location of frame buffer driver for imx27   Jürgen Lambrecht
• [klibc] fwd: fix up ARM assembly to use 'bx lr' in place of 'mov pc, lr'.   Steve Langasek
• [PATCH 1/2] drivers/watchdog/s3c2410_wdt.c: Convert release_resource to release_region/release_mem_region   Julia Lawall
• [PATCH 1/2] drivers/watchdog/s3c2410_wdt.c: Convert release_resource to release_region/release_mem_region   Julia Lawall
• [PATCH] drivers: ld9040 amoled driver support   Donghwa Lee
• [PATCH v2] drivers: ld9040 amoled driver support   Donghwa Lee
• [PATCH] backlight/platform_lcd: change set power function parameter in plat_lcd_data   Donghwa Lee
• OMAP4: IRQ line of CortexA9 performance monitor   Ming Lei
• [PATCH] ARM: imx53_smd add uncompress print   Frank Li
• [PATCH 2/2 v2] dma: ipu_idmac: do not lose valid received data in the irq handler   Guennadi Liakhovetski
• [PATCH] fix warning on pcm990   Guennadi Liakhovetski
• [PATCH 2/2 v2] dma: ipu_idmac: do not lose valid received data in the irq handler   Guennadi Liakhovetski
• [PATCH 2/2 v2] dma: ipu_idmac: do not lose valid received data in the irq handler   Guennadi Liakhovetski
• [PATCH 2/2 v2] dma: ipu_idmac: do not lose valid received data in the irq handler   Guennadi Liakhovetski
• [PATCH 2/2 v2] dma: ipu_idmac: do not lose valid received data in the irq handler   Guennadi Liakhovetski
• [PATCH 2/2 v2] dma: ipu_idmac: do not lose valid received data in the irq handler   Guennadi Liakhovetski
• [PATCH 2/2 v2] dma: ipu_idmac: do not lose valid received data in the irq handler   Guennadi Liakhovetski
• [PATCH 2/2 v2] dma: ipu_idmac: do not lose valid received data in the irq handler   Guennadi Liakhovetski
• [PATCH] mx3fb: Fix parameter to sdc_init_panel   Guennadi Liakhovetski
• [PATCH] mx3fb: Fix parameter to sdc_init_panel   Guennadi Liakhovetski
• [PATCH] mx3fb: Fix parameter to sdc_init_panel   Guennadi Liakhovetski
• [PATCH] mx3fb: Fix parameter to sdc_init_panel   Guennadi Liakhovetski
• [PATCH] mx3fb: Fix parameter to sdc_init_panel   Guennadi Liakhovetski
• [PATCH 2/4] V4L: mx3_camera: convert to videobuf2   Guennadi Liakhovetski
• [PATCH 2/4] V4L: mx3_camera: convert to videobuf2   Guennadi Liakhovetski
• dma_declare_coherent_memory() again.   Guennadi Liakhovetski
• [PATCH] ARM: map ATAGs when not in first 1MB of RAM   Grant Likely
• [PATCH v2 2/6] arm/dt: Allow CONFIG_OF on ARM   Grant Likely
• FW: [PATCH v2 4/6] arm/dt: probe for platforms via the device tree   Grant Likely
• Updates to devicetree/arm branch   Grant Likely
• [RFC 2/2] ARM:boot:device tree: Merge specific atags into the device tree   Grant Likely
• [PATCH 01/11] ARM: integrator: use new init_early for clock tree init   Grant Likely
• Updates to devicetree/arm branch   Grant Likely
• [PATCH 3/4] ARM: Xilinx: Adding timer support to the platform   Grant Likely
• [PATCH v2] davinci: spi: move event queue parameter to platform data   Grant Likely
• [RFC PATCH] ARM: pmu: add OF match support   Grant Likely
• [RFC PATCH] ARM: pmu: add OF match support   Grant Likely
• [RFC PATCH] ARM: pmu: add OF match support   Grant Likely
• [RFC PATCH] ARM: pmu: add OF match support   Grant Likely
• [PATCH v3 0/6] Basic ARM devicetree support   Grant Likely
• [PATCH v3 1/6] arm/dt: Make __vet_atags also accept a dtb image   Grant Likely
• [PATCH v3 2/6] arm/dt: Allow CONFIG_OF on ARM   Grant Likely
• [PATCH v3 3/6] arm/dt: consolidate atags setup into setup_machine_atags   Grant Likely
• [PATCH v3 4/6] arm/dt: probe for platforms via the device tree   Grant Likely
• [PATCH v3 5/6] arm/dt: Basic versatile devicetree support   Grant Likely
• [PATCH v3 6/6] arm/dt: Basic tegra devicetree support   Grant Likely
• mc13xxx-core, support for i2c, V4   Grant Likely
• [RFC PATCH] ARM: pmu: add OF match support   Grant Likely
• [git pull] Revert arm/dt documentation change that shouldn't have been merged yet   Grant Likely
• [PATCH] spi/imx: select master mode for all channels   Grant Likely
• [PATCH 1/4] spi/pl022: use dmaengine helper macros   Grant Likely
• [PATCH 2/4] spi/pl022: disable core voltage when idle   Grant Likely
• [PATCH 3/4] spi/pl022: remove dangling status check   Grant Likely
• [PATCH 4/4] spi/pl022: minor kerneldoc updates   Grant Likely
• [PATCH] spi/imx: select master mode for all channels   Grant Likely
• [PATCH] spi/pl022: rid dangling labels   Grant Likely
• [PATCH 2/2] ARM: remove the 4x expansion presumption while decompressing the kernel   Grant Likely
• [PATCH 2/2] ARM: remove the 4x expansion presumption while decompressing the kernel   Grant Likely
• [PATCH 2/2] ARM: remove the 4x expansion presumption while decompressing the kernel   Grant Likely
• [PATCH v4 0/7] Basic ARM devicetree support   Grant Likely
• [PATCH v4 1/7] arm/dt: Make __vet_atags also accept a dtb image   Grant Likely
• [PATCH v4 2/7] arm/dt: Allow CONFIG_OF on ARM   Grant Likely
• [PATCH v4 3/7] arm/dt: consolidate atags setup into setup_machine_atags   Grant Likely
• [PATCH v4 4/7] arm/dt: probe for platforms via the device tree   Grant Likely
• [PATCH v4 5/7] arm/dt: Basic versatile devicetree support   Grant Likely
• [PATCH v4 6/7] arm/dt: Basic tegra devicetree support   Grant Likely
• [PATCH v4 7/7] dt: add documentation of ARM dt boot interface   Grant Likely
• [PATCH v4 7/7] dt: add documentation of ARM dt boot interface   Grant Likely
• [PATCH V11 2/4] ptp: Added a clock that uses the eTSEC found on the MPC85xx.   Grant Likely
• [PATCH V11 2/4] ptp: Added a clock that uses the eTSEC found on the MPC85xx.   Grant Likely
• [PATCH 4/6] ARM: tegra: harmony: register sdhci devices   Grant Likely
• [PATCH v4 6/7] arm/dt: Basic tegra devicetree support   Grant Likely
• [PATCH v4 6/7] arm/dt: Basic tegra devicetree support   Grant Likely
• [PXA] A question about PXA310 cpufreq for 806Mhz   Axel Lin
• [PATCH] ARM: SAMSUNG: Drop exporting s3c24xx_ts_set_platdata   Axel Lin
• [PATCH] ARM: pxa: support 806MHz operating points for PXA31x processors A2 stepping   Axel Lin
• [PATCH] ARM: pxa: support 806MHz operating points for PXA31x processors A2 stepping   Axel Lin
• [PATCH] davinci: cpufreq: fix section mismatch warning   Axel Lin
• [PATCH] ARM: pxa: support 806MHz operating points for PXA31x processors A2 stepping   Axel Lin
• [PATCH] arm: mach-omap2: mux: free allocated memory on error exit   Tony Lindgren
• [PATCH] arm: mach-omap2: board-rm680: fix rm680_vemmc regulator constraints   Tony Lindgren
• [PATCHv5] OMAP3: Devkit8000: Change lcd power pin   Tony Lindgren
• [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)   Tony Lindgren
• [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)   Tony Lindgren
• [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)   Tony Lindgren
• [PATCH 2/2] arm: Kconfig: allow OMAP to use sparse IRQ numbering   Tony Lindgren
• [PATCH 0/2] Allow using machine ID for DEBUG_LL macros   Tony Lindgren
• [PATCH 1/2] ARM: Add inituart macro to initialize DEBUG_LL serial port based on the machine ID   Tony Lindgren
• [PATCH 2/2] ARM: Add empty inituart macros   Tony Lindgren
• [PATCH 0/5] Change omap DEBUG_LL code to use inituart for AUTO_ZRELADDR and ARM_PATCH_PHYS_VIRT   Tony Lindgren
• [PATCH 1/5] omap: Remove code configuring the DEBUG_LL serial port using uncompress code   Tony Lindgren
• [PATCH 2/5] omap: Use inituart to configure the debug serial port based on machine ID   Tony Lindgren
• [PATCH 3/5] omap: Add support for CONFIG_AUTO_ZRELADDR for DEBUG_LL   Tony Lindgren
• [PATCH 4/5] omap: Combine debug-macro.S for omap1 and omap2+   Tony Lindgren
• [PATCH 5/5] omap: Add CONFIG_AUTO_ZRELADDR and CONFIG_ARM_PATCH_PHYS_VIRT to defconfigs   Tony Lindgren
• [PATCH][trivial] ARM, OMAP, timer: Remove duplicate inclusion of linux/sched.h from arch/arm/mach-omap1/time.c   Tony Lindgren
• [PATCH v4 1/4] drivers: hwspinlock: add framework   Tony Lindgren
• [PATCH 2/2] ARM: Add empty inituart macros   Tony Lindgren
• [PATCH 0/2] Allow using machine ID for DEBUG_LL macros   Tony Lindgren
• [PATCH 1/2] ARM: Add inituart macro to initialize DEBUG_LL serial port based on the machine ID   Tony Lindgren
• [PATCH 2/5] omap: Use inituart to configure the debug serial port based on machine ID   Tony Lindgren
• [PATCH 3/5] omap: Add support for CONFIG_AUTO_ZRELADDR for DEBUG_LL   Tony Lindgren
• [PATCH 3/5] omap: Add support for CONFIG_AUTO_ZRELADDR for DEBUG_LL   Tony Lindgren
• linux-next-20100201 - OMAP2+ defconfig broken with CONFIG_DEBUG_LL   Tony Lindgren
• [PATCH 01/20] mach-omap2: mux: world-writable debugfs files   Tony Lindgren
• [PATCH 02/20] mach-omap2: pm: world-writable debugfs timer files   Tony Lindgren
• [PATCH 03/20] mach-omap2: smartreflex: world-writable debugfs voltage files   Tony Lindgren
• [PATCH 3/5] omap: Add support for CONFIG_AUTO_ZRELADDR for DEBUG_LL   Tony Lindgren
• [RFC] arm: Defer lookup of machine_type and vet of atags to setup.c   Tony Lindgren
• [RFC 1/5] ARM: P2V: separate PHYS_OFFSET from platform definitions   Tony Lindgren
• [RFC 2/5] ARM: P2V: avoid initializers and assembly using PHYS_OFFSET   Tony Lindgren
• [RFC 3/5] ARM: P2V: make head.S use PLAT_PHYS_OFFSET   Tony Lindgren
• [RFC 4/5] ARM: P2V: introduce phys_to_virt/virt_to_phys runtime patching   Tony Lindgren
• [RFC 5/5] ARM: P2V: extend to 16-bit translation offsets   Tony Lindgren
• [PATCH v2] ARM: map ATAGs when not in first 1MB of RAM   Tony Lindgren
• [GIT PULL] omap fixes for v2.6.38-rc3   Tony Lindgren
• [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels   Tony Lindgren
• [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels   Tony Lindgren
• [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels   Tony Lindgren
• [PATCH v5 0/5] omap: mailbox: hwmod support   Tony Lindgren
• [PATCH v6 0/6] OMAP: McSPI: Hwmod adaptation + runtime conversion   Tony Lindgren
• [PATCH] ARM: omap1/nokia770: mark some functions __init   Tony Lindgren
• [PATCH] ARM: omap1/nokia770: mark some functions __init   Tony Lindgren
• [PATCH 2/5] omap4: Enable ARM local timers with OMAP4430 es1.0 exception   Tony Lindgren
• [PATCH 4/5] omap2plus: omap4: Set NR_CPU to 2 instead of default 4   Tony Lindgren
• [PATCH 5/5] omap4: Remove 'FIXME: omap44xx_sram_init not implemented'   Tony Lindgren
• [PATCH 1/2] OMAP2420: mailbox: fix IVA vs DSP IRQ numbering   Tony Lindgren
• [PATCH] ARM: OMAP2: use early init hook   Tony Lindgren
• [PATCH] omap: Move omap2_check_revision and omap_sram_init out of map_io   Tony Lindgren
• [PATCH] omap: Move omap2_check_revision and omap_sram_init out of map_io   Tony Lindgren
• [PATCH v7 0/4] Introduce support for TI816X processor series   Tony Lindgren
• [PATCH v7 3/4] TI816X: Create board support and enable build for TI816X EVM   Tony Lindgren
• [PATCH] TI816X: Update to use init_early   Tony Lindgren
• [PATCH] omap: Move omap2_check_revision and omap_sram_init out of map_io   Tony Lindgren
• [PATCH 1/2] omap4: 4430sdp: drop ehci support   Tony Lindgren
• [PATCH 0/8] OMAP4: hwmod data: Add a bunch of IPs   Tony Lindgren
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Tony Lindgren
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Tony Lindgren
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Tony Lindgren
• [PATCH 2/8] OMAP4: hwmod data: Add McSPI   Tony Lindgren
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Tony Lindgren
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Tony Lindgren
• [PATCH 5/5] OMAP3EVM: Set TSC wakeup option in pad config   Tony Lindgren
• [PATCH v9 0/7] nand prefetch-irq support and ecc layout chanage   Tony Lindgren
• [PATCH v5 3/5] OMAP4: hwmod data: add mailbox data   Tony Lindgren
• [PATCH 4/4] mtd: OneNAND: OMAP2: increase multiblock erase verify timeout   Tony Lindgren
• [PATCH v2] OMAP: IOMMU: add missing function declaration   Tony Lindgren
• [PATCH v2 0/2] Fix/Clean regulator consumer mapping for 3430sdp   Tony Lindgren
• [PATCH] OMAP2: add regulator for MMC1   Tony Lindgren
• [PATCH] omap iommu: print module name on error messages   Tony Lindgren
• [PATCH 0/2] omap3: minor clean-up in flash related code   Tony Lindgren
• [RESEND][PATCH] ARM: OMAP: Add chip id recognition for OMAP4 ES2.1 and ES2.2   Tony Lindgren
• [PATCH 4/4] mtd: OneNAND: OMAP2: increase multiblock erase verify timeout   Tony Lindgren
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Tony Lindgren
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Tony Lindgren
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Tony Lindgren
• [PATCH 2/5] ARM: omap: update GPIO chained IRQ handler to use EOI in parent chip   Tony Lindgren
• [PATCH] ARM: Fix compile after delay page freeing patch   Tony Lindgren
• [PATCH] ARM: Fix compile after delay page freeing patch   Tony Lindgren
• [PATCH] ARM: Fix compile after delay page freeing patch   Tony Lindgren
• [PATCH] ARM: fix build failure   Tony Lindgren
• [PATCH 7/8] OMAP2+: hwmod: add ability to late-init individual hwmods   Tony Lindgren
• [PATCH 0/8] OMAP2+: hwmod/clockevent: allow late-init of individual hwmods   Tony Lindgren
• [PATCH 8/8] OMAP2+: clockevent: late-init GPTIMER clockevent hwmodright before timer init   Tony Lindgren
• [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)   Tony Lindgren
• [PATCH] OMAP2+: clocksource: fix crash on boot when !CONFIG_OMAP_32K_TIMER   Tony Lindgren
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   Tony Lindgren
• [PATCH v6 0/4] omap: mailbox: hwmod support   Tony Lindgren
• [PATCH v6] OMAP2/3/4: DSS2: Enable Display SubSystem as modules   Tony Lindgren
• [PATCH] OMAP2+: clocksource: fix crash on boot when !CONFIG_OMAP_32K_TIMER   Tony Lindgren
• [PATCH resend] omap: Fix linker error in drivers/video/omap/lcd_2430sdp.c   Tony Lindgren
• [PATCH resend] omap: rx51: Add SI4713 FM transmitter   Tony Lindgren
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   Tony Lindgren
• [PATCH] omap2+: Minimize board specific init_early calls   Tony Lindgren
• [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)   Tony Lindgren
• [GIT PULL] omap fixes for v2.6.38-rc6   Tony Lindgren
• [PATCH resend] omap: Fix linker error in drivers/video/omap/lcd_2430sdp.c   Tony Lindgren
• [PATCH] OMAP2+: sdrc: fix compile break on OMAP4-only config on current omap-for-linus   Tony Lindgren
• Updates to devicetree/arm branch   John Linn
• [PATCH 0/4] ARM: Basic Xilinx Support   John Linn
• [PATCH 1/4] ARM: Xilinx: Adding Xilinx platform infrastructure support   John Linn
• [PATCH 2/4] ARM: Xilinx: Adding Xilinx board support   John Linn
• [PATCH 3/4] ARM: Xilinx: Adding timer support to the platform   John Linn
• [PATCH 4/4] ARM: Xilinx: base header files and assembly macros   John Linn
• [PATCH 0/4] ARM: Basic Xilinx Support (resend)   John Linn
• [PATCH 1/4] ARM: Xilinx: Adding Xilinx platform infrastructure support   John Linn
• [PATCH 2/4] ARM: Xilinx: Adding Xilinx board support   John Linn
• [PATCH 3/4] ARM: Xilinx: Adding timer support to the platform   John Linn
• [PATCH 4/4] ARM: Xilinx: base header files and assembly macros   John Linn
• [PATCH 1/4] ARM: Xilinx: Adding Xilinx platform infrastructuresupport   John Linn
• [PATCH 2/4] ARM: Xilinx: Adding Xilinx board support   John Linn
• [PATCH 0/4] ARM: Basic Xilinx Support   John Linn
• [PATCH 3/4] ARM: Xilinx: Adding timer support to the platform   John Linn
• [PATCH 4/4] ARM: Xilinx: base header files and assembly macros   John Linn
• [PATCH 2/4] ARM: Xilinx: Adding Xilinx board support   John Linn
• [PATCH 2/4] ARM: Xilinx: Adding Xilinx board support   John Linn
• [PATCH 3/4] ARM: Xilinx: Adding timer support to the platform   John Linn
• [PATCH 3/4] ARM: Xilinx: Adding timer support to the platform   John Linn
• [PATCH 2/4] ARM: Xilinx: Adding Xilinx board support   John Linn
• [PATCH 2/4] ARM: Xilinx: Adding Xilinx board support   John Linn
• [PATCH 4/4] ARM: Xilinx: base header files and assembly macros   John Linn
• [PATCH 4/4] ARM: Xilinx: base header files and assembly macros   John Linn
• [PATCH 3/4] ARM: Xilinx: Adding timer support to the platform   John Linn
• [PATCH 3/4] ARM: Xilinx: Adding timer support to the platform   John Linn
• [PATCH 3/4] ARM: Xilinx: Adding timer support to the platform   John Linn
• [PATCH V2 0/4] ARM: Basic Xilinx Support   John Linn
• [PATCH V2 1/4] ARM: Xilinx: Adding Xilinx board support   John Linn
• [PATCH V2 2/4] ARM: Xilinx: Adding timer support to the platform   John Linn
• [PATCH V2 3/4] ARM: Xilinx: base header files and assembly macros   John Linn
• [PATCH V2 4/4] ARM: Xilinx: Adding Xilinx platform infrastructure support   John Linn
• Machine ID question   John Linn
• [PATCH V2 1/4] ARM: Xilinx: Adding Xilinx board support   John Linn
• [PATCH V2 3/4] ARM: Xilinx: base header files and assemblymacros   John Linn
• Machine ID question   John Linn
• [PATCH V3 0/4] ARM: Basic Xilinx Support   John Linn
• [PATCH V3 1/4] ARM: Xilinx: Adding Xilinx board support   John Linn
• [PATCH V3 2/4] ARM: Xilinx: Adding timer support to the platform   John Linn
• [PATCH V3 3/4] ARM: Xilinx: base header files and assembly macros   John Linn
• [PATCH V3 4/4] ARM: Xilinx: Adding Xilinx platform infrastructure support   John Linn
• [PATCH V3 1/4] ARM: Xilinx: Adding Xilinx board support   John Linn
• [PATCH V3 2/4] ARM: Xilinx: Adding timer support to the platform   John Linn
• [PATCH V3 3/4] ARM: Xilinx: base header files and assembly macros   John Linn
• [PATCH V3 3/4] ARM: Xilinx: base header files and assembly macros   John Linn
• [PATCH V3 3/4] ARM: Xilinx: base header files and assembly macros   John Linn
• [PATCH V3 3/4] ARM: Xilinx: base header files and assembly macros   John Linn
• [PATCH V3 3/4] ARM: Xilinx: base header files and assembly macros   John Linn
• [PATCH V3 3/4] ARM: Xilinx: base header files and assembly macros   John Linn
• [PATCH V4 0/4] ARM: Basic Xilinx Support   John Linn
• [PATCH V4 1/4] ARM: Xilinx: Adding Xilinx board support   John Linn
• [PATCH V4 2/4] ARM: Xilinx: Adding timer support to the platform   John Linn
• [PATCH V4 3/4] ARM: Xilinx: base header files and assembly macros   John Linn
• [PATCH V4 4/4] ARM: Xilinx: Adding Xilinx platform infrastructure support   John Linn
• [PATCH V4 3/4] ARM: Xilinx: base header files and assembly macros   John Linn
• [PATCH V4 3/4] ARM: Xilinx: base header files and assembly macros   John Linn
• Machine ID question   John Linn
• [PATCH V4 3/4] ARM: Xilinx: base header files and assembly macros   John Linn
• When does mach-types get updated in a tree?   John Linn
• When does mach-types get updated in a tree?   John Linn
• [PATCH V4 1/4] ARM: Xilinx: Adding Xilinx board support   John Linn
• [PATCH V4 2/4] ARM: Xilinx: Adding timer support to the platform   John Linn
• [PATCH V4 3/4] ARM: Xilinx: base header files and assembly macros   John Linn
• [PATCH V4 0/4] ARM: Basic Xilinx Support   John Linn
• [PATCH V4 3/4] ARM: Xilinx: base header files and assemblymacros   John Linn
• When does mach-types get updated in a tree?   John Linn
• When does mach-types get updated in a tree?   John Linn
• [PATCH V5 0/4] ARM: Basic Xilinx Support   John Linn
• [PATCH V5 1/4] ARM: Xilinx: Adding Xilinx board support   John Linn
• [PATCH V5 2/4] ARM: Xilinx: Adding timer support to the platform   John Linn
• [PATCH V5 3/4] ARM: Xilinx: base header files and assembly macros   John Linn
• [PATCH V5 4/4] ARM: Xilinx: Adding Xilinx platform infrastructure support   John Linn
• linux-next-20100201 - OMAP2+ defconfig broken with CONFIG_DEBUG_LL   Russell King - ARM Linux
• [PATCH] mmci: restrict DMA usage to large, even multiblock transfers   Russell King - ARM Linux
• [PATCH] mmci: make sure DMA transfers wait for FIFO drain   Russell King - ARM Linux
• [PATCH] arm: Improve MMC performance on Versatile Express   Russell King - ARM Linux
• [PATCH] mmci: restrict DMA usage to large, even multiblock transfers   Russell King - ARM Linux
• [PATCH 3/9] Add a mfd IPUv3 driver   Russell King - ARM Linux
• [PATCH] mmci: restrict DMA usage to large, even multiblock transfers   Russell King - ARM Linux
• [PATCH v2 02/28] ARM: gic: Add functions to save and restore gic state   Russell King - ARM Linux
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Russell King - ARM Linux
• [PATCH] ARM: add PrimeCell generic DMA to MMCI/PL180   Russell King - ARM Linux
• [PATCH] arm: Improve MMC performance on Versatile Express   Russell King - ARM Linux
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Russell King - ARM Linux
• [PATCH] mmci: restrict DMA usage to large, even multiblock transfers   Russell King - ARM Linux
• [PATCH] mmci: restrict DMA usage to large, even multiblock transfers   Russell King - ARM Linux
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Russell King - ARM Linux
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Russell King - ARM Linux
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Russell King - ARM Linux
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Russell King - ARM Linux
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Russell King - ARM Linux
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Russell King - ARM Linux
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Russell King - ARM Linux
• [PATCH] mmci: calculate remaining bytes at error correctly   Russell King - ARM Linux
• [PATCH v4 1/4] drivers: hwspinlock: add framework   Russell King - ARM Linux
• ARM unaligned MMIO access with attribute((packed))   Russell King - ARM Linux
• ARM unaligned MMIO access with attribute((packed))   Russell King - ARM Linux
• [PATCH] ARM: bitops: Fix low-level code to be Thumb-2 compatible   Russell King - ARM Linux
• [PATCH] ARM: bitops: Fix low-level code to be Thumb-2 compatible   Russell King - ARM Linux
• [PATCH v2] ARM: kexec: selective MMU identity mapping   Russell King - ARM Linux
• fixes to the p2v series   Russell King - ARM Linux
• [PATCH] ARM: bitops: Fix low-level code to be Thumb-2 compatible   Russell King - ARM Linux
• ARM unaligned MMIO access with attribute((packed))   Russell King - ARM Linux
• [PATCH v2] ARM: kexec: selective MMU identity mapping   Russell King - ARM Linux
• [PATCH v2] ARM: kexec: selective MMU identity mapping   Russell King - ARM Linux
• [PATCH] mmci: calculate remaining bytes at error correctly   Russell King - ARM Linux
• barriers in mutexes?   Russell King - ARM Linux
• [PATCH] mmci: calculate remaining bytes at error correctly   Russell King - ARM Linux
• "Porting the Linux Kernel to a New ARM Platform", updated...?   Russell King - ARM Linux
• [PATCH v4 09/19] ARM: LPAE: Page table maintenance for the 3-level format   Russell King - ARM Linux
• [PATCH v2 1/5] ARM: omap4: Correct definition of do_wfi() for CONFIG_THUMB2_KERNEL   Russell King - ARM Linux
• [PATCH 1/2] ARM: Add inituart macro to initialize DEBUG_LL serial port based on the machine ID   Russell King - ARM Linux
• [PATCH RFC] arm: omap3evm: Add support for an MT9M032 based camera board.   Russell King - ARM Linux
• [PATCH 4/5] ARM: scu: Move register defines to header file   Russell King - ARM Linux
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Russell King - ARM Linux
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Russell King - ARM Linux
• [PATCH 2/2] ARM: Make CONFIG_FPE_NWFPE depend on !CONFIG_THUMB2_KERNEL   Russell King - ARM Linux
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Russell King - ARM Linux
• [PATCH 4/5] ARM: scu: Move register defines to header file   Russell King - ARM Linux
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Russell King - ARM Linux
• [PATCH 1/2] ARM: Add inituart macro to initialize DEBUG_LL serial port based on the machine ID   Russell King - ARM Linux
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Russell King - ARM Linux
• [PATCH] ep93xx: fix build error in edb93xx framebuffer support   Russell King - ARM Linux
• [PATCH 3/5] omap: Add support for CONFIG_AUTO_ZRELADDR for DEBUG_LL   Russell King - ARM Linux
• [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28   Russell King - ARM Linux
• [PATCH 01/11] ARM: integrator: use new init_early for clock tree init   Russell King - ARM Linux
• [PATCH 01/11] ARM: integrator: use new init_early for clock tree init   Russell King - ARM Linux
• [PATCH v2 04/28] ARM: mm: cache-l2x0: Add support for re-enabling l2x0   Russell King - ARM Linux
• [PATCH v2 04/28] ARM: mm: cache-l2x0: Add support for re-enabling l2x0   Russell King - ARM Linux
• [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28   Russell King - ARM Linux
• [PATCH 1/4] ARM: Xilinx: Adding Xilinx platform infrastructure support   Russell King - ARM Linux
• [PATCH 2/4] ARM: Xilinx: Adding Xilinx board support   Russell King - ARM Linux
• [PATCH 3/4] ARM: Xilinx: Adding timer support to the platform   Russell King - ARM Linux
• [PATCH 4/4] ARM: Xilinx: base header files and assembly macros   Russell King - ARM Linux
• [PATCH 0/4] ARM: Basic Xilinx Support   Russell King - ARM Linux
• [PATCH 0/5] mmc: add double buffering for mmc block requests   Russell King - ARM Linux
• [PATCH 0/5] mmc: add double buffering for mmc block requests   Russell King - ARM Linux
• [PATCH] Clean up set_pxa_fb_info   Russell King - ARM Linux
• [RFC] Generic CPU save/restore PM support   Russell King - ARM Linux
• [PATCH 1/5] ARM: move cache/processor/fault glue to separate include files   Russell King - ARM Linux
• [PATCH 2/5] ARM: pm: add generic CPU suspend/resume support   Russell King - ARM Linux
• [PATCH 3/5] ARM: pm: convert PXA to generic suspend/resume support   Russell King - ARM Linux
• [PATCH 4/5] ARM: pm: convert sa11x0 to generic suspend/resume support   Russell King - ARM Linux
• [PATCH 5/5] ARM: pm: convert samsung platforms to generic suspend/resume support   Russell King - ARM Linux
• [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28   Russell King - ARM Linux
• [PATCH] RFC: ux500: add PMU resources   Russell King - ARM Linux
• [PATCH 4/5] ARM: scu: Move register defines to header file   Russell King - ARM Linux
• [PATCH 4/5] ARM: scu: Move register defines to header file   Russell King - ARM Linux
• [RFC] Generic CPU save/restore PM support   Russell King - ARM Linux
• [PATCH v2 2/5] ARM: pm: add generic CPU suspend/resume support   Russell King - ARM Linux
• [PATCH v3 2/5] ARM: pm: add generic CPU suspend/resume support   Russell King - ARM Linux
• [PATCH v3 2/5] ARM: pm: add generic CPU suspend/resume support   Russell King - ARM Linux
• [PATCH v3 2/5] ARM: pm: add generic CPU suspend/resume support   Russell King - ARM Linux
• [PATCH v3 2/5] ARM: pm: add generic CPU suspend/resume support   Russell King - ARM Linux
• [PATCH v3 2/5] ARM: pm: add generic CPU suspend/resume support   Russell King - ARM Linux
• [PATCH -next] ALSA: AACI: fix crash in aaci_size_fifo   Russell King - ARM Linux
• [PATCH -next] ALSA: AACI: fix crash in aaci_size_fifo   Russell King - ARM Linux
• [PATCH 4/5] ARM: pm: convert sa11x0 to generic suspend/resume support   Russell King - ARM Linux
• [PATCH 2/4] ARM: Xilinx: Adding Xilinx board support   Russell King - ARM Linux
• [PATCH 4/4] ARM: Xilinx: base header files and assembly macros   Russell King - ARM Linux
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Russell King - ARM Linux
• [PATCH v3 2/5] ARM: pm: add generic CPU suspend/resume support   Russell King - ARM Linux
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Russell King - ARM Linux
• [PATCH v3 2/5] ARM: pm: add generic CPU suspend/resume support   Russell King - ARM Linux
• [PATCH 4/4] ARM: Xilinx: base header files and assembly macros   Russell King - ARM Linux
• [PATCH 3/4] ARM: Xilinx: Adding timer support to the platform   Russell King - ARM Linux
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Russell King - ARM Linux
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Russell King - ARM Linux
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Russell King - ARM Linux
• [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28   Russell King - ARM Linux
• [PATCH] ARM: Correct WFE() in asm/spinlock.h for Thumb-2   Russell King - ARM Linux
• [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels   Russell King - ARM Linux
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Russell King - ARM Linux
• MMC quirks relating to performance/lifetime.   Russell King - ARM Linux
• [PATCH] arm: Use generic accessor in irq_set_flags()   Russell King - ARM Linux
• [PATCH] ARM: Correct WFE() in asm/spinlock.h for Thumb-2   Russell King - ARM Linux
• [RFC 4/5] ARM: P2V: introduce phys_to_virt/virt_to_phys runtime patching   Russell King - ARM Linux
• [PATCH] ARM: Avoid discarding sections that might have SMP_ON_UP fixups   Russell King - ARM Linux
• [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels   Russell King - ARM Linux
• [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels   Russell King - ARM Linux
• [PATCH] ARM: Avoid discarding sections that might have SMP_ON_UP fixups   Russell King - ARM Linux
• [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels   Russell King - ARM Linux
• [RFC,PATCH 1/3] Add a common struct clk   Russell King - ARM Linux
• [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels   Russell King - ARM Linux
• [PATCH] ARM: Avoid discarding sections that might have SMP_ON_UP fixups   Russell King - ARM Linux
• ARM: relocation out of range (when loading a module)   Russell King - ARM Linux
• [PATCH 4/5] ARM: scu: Move register defines to header file   Russell King - ARM Linux
• [PATCH] ARM: Avoid discarding sections that might have SMP_ON_UP fixups   Russell King - ARM Linux
• ARM: relocation out of range (when loading a module)   Russell King - ARM Linux
• [PATCH] mmci: make sure DMA transfers wait for FIFO drain   Russell King - ARM Linux
• [PATCH] ARM: Avoid discarding sections that might have SMP_ON_UP fixups   Russell King - ARM Linux
• [PATCH v3 2/5] ARM: pm: add generic CPU suspend/resume support   Russell King - ARM Linux
• reboot not working on linux-2.6.37 for ARMv7   Russell King - ARM Linux
• reboot not working on linux-2.6.37 for ARMv7   Russell King - ARM Linux
• [RFC PATCH 3/3] ARM: vfp: Use cpu pm notifiers to save vfp state   Russell King - ARM Linux
• ARM: relocation out of range (when loading a module)   Russell King - ARM Linux
• [PATCH] ARM: Avoid discarding sections that might have SMP_ON_UP fixups   Russell King - ARM Linux
• [PATCH] Generic CPU save/restore PM support   Russell King - ARM Linux
• [PATCH 1/6] ARM: move cache/processor/fault glue to separate include files   Russell King - ARM Linux
• [PATCH 2/6] ARM: pm: add generic CPU suspend/resume support   Russell King - ARM Linux
• [PATCH 3/6] ARM: pm: convert PXA to generic suspend/resume support   Russell King - ARM Linux
• [PATCH 4/6] ARM: pm: convert sa11x0 to generic suspend/resume support   Russell King - ARM Linux
• [PATCH 5/6] ARM: pm: convert samsung platforms to generic suspend/resume support   Russell King - ARM Linux
• [PATCH 6/6] ARM: pm: allow generic sleep code to be used with SMP CPU idle   Russell King - ARM Linux
• [PATCH] ARM: Avoid discarding sections that might have SMP_ON_UP fixups   Russell King - ARM Linux
• [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels   Russell King - ARM Linux
• [PATCH RFC] ARM: MPCore v6_early_abort enhancement   Russell King - ARM Linux
• [PATCH 1/6] ARM: move cache/processor/fault glue to separate include files   Russell King - ARM Linux
• [PATCH v4 02/19] ARM: LPAE: Fix early_pte_alloc() assumption about the Linux PTE   Russell King - ARM Linux
• [PATCH v4 03/19] ARM: LPAE: use long long format when printing physical addresses and ptes   Russell King - ARM Linux
• [PATCH v4 15/19] ARM: LPAE: use phys_addr_t instead of unsigned long for physical addresses   Russell King - ARM Linux
• [PATCH v4 16/19] ARM: LPAE: Use generic dma_addr_t type definition   Russell King - ARM Linux
• [PATCH v4 17/19] ARM: LPAE: mark memory banks with start > ULONG_MAX as highmem   Russell King - ARM Linux
• [PATCH v4 12/19] ARM: LPAE: Add context switching support   Russell King - ARM Linux
• MMC quirks relating to performance/lifetime.   Russell King - ARM Linux
• [PATCH V2 1/4] ARM: Xilinx: Adding Xilinx board support   Russell King - ARM Linux
• [PATCH V2 3/4] ARM: Xilinx: base header files and assembly macros   Russell King - ARM Linux
• [RFC PATCH 1/3] ARM: Add cpu power management notifiers   Russell King - ARM Linux
• [PATCH v3 2/5] ARM: pm: add generic CPU suspend/resume support   Russell King - ARM Linux
• reboot not working on linux-2.6.37 for ARMv7   Russell King - ARM Linux
• MMC quirks relating to performance/lifetime.   Russell King - ARM Linux
• reboot not working on linux-2.6.37 for ARMv7   Russell King - ARM Linux
• The p2v branch   Russell King - ARM Linux
• [PATCH] Clean up set_pxa_fb_info   Russell King - ARM Linux
• [PATCH RFC] ARM: MPCore v6_early_abort enhancement   Russell King - ARM Linux
• The p2v branch   Russell King - ARM Linux
• [PATCH 2/2] P2V: Thumb2 support   Russell King - ARM Linux
• [PATCH] ARM: PXA: Make PXA27x/PXA3xx overlay actually work   Russell King - ARM Linux
• [PATCH] pl011: add optional RX DMA to PL011   Russell King - ARM Linux
• [PATCH 2/2] mach-mmp: Support for SD/MMC clock adjustment in brownstone   Russell King - ARM Linux
• [PATCH 6/6] ARM: pm: allow generic sleep code to be used with SMP CPU idle   Russell King - ARM Linux
• [PATCH 1/2] ARM: Introduce THREAD_NOTIFY_COPY for copy_thread() hooks   Russell King - ARM Linux
• [PATCH v2 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Russell King - ARM Linux
• [PATCH] Ensure predictable endian state on signal handler entry   Russell King - ARM Linux
• [RFC,PATCH 1/3] Add a common struct clk   Russell King - ARM Linux
• [PATCH] ARM: PXA: Make PXA27x/PXA3xx overlay actually work   Russell King - ARM Linux
• [RFC PATCH 2/2] ARMv7: Invalidate the TLB before freeing page tables   Russell King - ARM Linux
• [PATCH 2/6] ARM: pm: add generic CPU suspend/resume support   Russell King - ARM Linux
• [PATCH 2/6] ARM: pm: add generic CPU suspend/resume support   Russell King - ARM Linux
• [RFC PATCH 2/2] ARMv7: Invalidate the TLB before freeing page tables   Russell King - ARM Linux
• [PATCH] ARM: errata: pl310 cache sync operation may be faulty   Russell King - ARM Linux
• [PATCH] ARM: S5PC210: add support for i2c PMICs on Universal_C210 board   Russell King - ARM Linux
• [RFC PATCH 2/2] ARMv7: Invalidate the TLB before freeing page tables   Russell King - ARM Linux
• [PATCH v4 15/19] ARM: LPAE: use phys_addr_t instead of unsigned long for physical addresses   Russell King - ARM Linux
• [RFC] ARM: dma-mapping: outer cache is invalidated twice   Russell King - ARM Linux
• [RFC] ARM: dma-mapping: outer cache is invalidated twice   Russell King - ARM Linux
• [RFC] ARM: dma-mapping: outer cache is invalidated twice   Russell King - ARM Linux
• [PATCH v2 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Russell King - ARM Linux
• [PATCH v4 15/19] ARM: LPAE: use phys_addr_t instead of unsigned long for physical addresses   Russell King - ARM Linux
• [PATCH v4 16/19] ARM: LPAE: Use generic dma_addr_t type definition   Russell King - ARM Linux
• [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()   Russell King - ARM Linux
• [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()   Russell King - ARM Linux
• [RFC] ARM: dma-mapping: outer cache is invalidated twice   Russell King - ARM Linux
• [PATCH v4 15/19] ARM: LPAE: use phys_addr_t instead of unsigned long for physical addresses   Russell King - ARM Linux
• [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()   Russell King - ARM Linux
• [PATCH v2] ARM: vfp: Always save VFP state in vfp_pm_suspend   Russell King - ARM Linux
• [PATCH v2 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Russell King - ARM Linux
• [PATCH v2 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Russell King - ARM Linux
• [PATCH] ARM: Thumb-2: Enable ARM/Thumb interworking for v7 cache maintenance   Russell King - ARM Linux
• [PATCH v7 3/4] TI816X: Create board support and enable build for TI816X EVM   Russell King - ARM Linux
• [RFC] MMC: error handling improvements   Russell King - ARM Linux
• [PATCH V5 12/63] ST SPEAr: Adding support for CLCD on SPEAr3xx/6xx   Russell King - ARM Linux
• [PATCH V5 00/63] Updating SPEAr Support   Russell King - ARM Linux
• [PATCH V5 12/63] ST SPEAr: Adding support for CLCD on SPEAr3xx/6xx   Russell King - ARM Linux
• [PATCH] ARM: gic: use handle_fasteoi_irq for SPIs   Russell King - ARM Linux
• [PATCH 2/2] ARM: remove the 4x expansion presumption while decompressing the kernel   Russell King - ARM Linux
• [PATCH] ARM: gic: use handle_fasteoi_irq for SPIs   Russell King - ARM Linux
• [RFC] MMC: error handling improvements   Russell King - ARM Linux
• [PATCH] ARM: gic: use handle_fasteoi_irq for SPIs   Russell King - ARM Linux
• [PATCH 1/2] ARM: PXA: PXAFB: Fix double-free issue.   Russell King - ARM Linux
• [PATCH 1/2] omap4: 4430sdp: drop ehci support   Russell King - ARM Linux
• [PATCH 2/6] ARM: pm: add generic CPU suspend/resume support   Russell King - ARM Linux
• [PATCH 5/6] ARM: pm: convert samsung platforms to generic suspend/resume support   Russell King - ARM Linux
• [RFC 2/5] ARM: P2V: avoid initializers and assembly using PHYS_OFFSET   Russell King - ARM Linux
• [RFC 0/5] runtime P2V translations   Russell King - ARM Linux
• [PATCH v2 1/3] dmaengine: mxs-dma: add dma support for i.MX23/28   Russell King - ARM Linux
• [PATCH V3 3/4] ARM: Xilinx: base header files and assembly macros   Russell King - ARM Linux
• [PATCH 2/2] ARM: remove the 4x expansion presumption while decompressing the kernel   Russell King - ARM Linux
• [PATCH 1/2] ARM: PXA: PXAFB: Fix double-free issue.   Russell King - ARM Linux
• [PATCH 5/6] ARM: pm: convert samsung platforms to generic suspend/resume support   Russell King - ARM Linux
• [PATCH 2/6] ARM: pm: add generic CPU suspend/resume support   Russell King - ARM Linux
• [PATCH 00/10] Fix CLCD framebuffer formats and consolidate ARM platform CLCD support   Russell King - ARM Linux
• platform/i2c busses: pm runtime and system sleep   Russell King - ARM Linux
• Question About Linux Memory Mapping   Russell King - ARM Linux
• [PATCH] arm/mach-stmp3xxx: remove headers for DUART   Russell King - ARM Linux
• platform/i2c busses: pm runtime and system sleep   Russell King - ARM Linux
• [PATCH 1/2] PRUSS UIO driver support   Russell King - ARM Linux
• [PATCH V5 00/63] Updating SPEAr Support   Russell King - ARM Linux
• [PATCH V5 03/63] sp810 Fix: Switch to slow mode before sysctl_soft_reset   Russell King - ARM Linux
• [PATCH V5 41/63] ST SPEAr: replace readl, writel with readl_relaxed, writel_relaxed in uncompress.h   Russell King - ARM Linux
• [RFC] MMC: error handling improvements   Russell King - ARM Linux
• [PATCH 1/3] amba: make probe() functions take const id tables   Russell King - ARM Linux
• [PATCH 2/3] amba: make internal ID table handling const   Russell King - ARM Linux
• [PATCH 3/3] Make amba_driver id_table const   Russell King - ARM Linux
• [PATCH V5 15/63] ST SPEAr: Correcting SOC Config base address for spear320   Russell King - ARM Linux
• [PATCH V5 57/63] ST SPEAr3xx: Updating plgpio and emi source to make it compliant with single image strategy   Russell King - ARM Linux
• [PATCH V5 36/63] ST SPEAr : EMI (Extrenal Memory Interface) controller driver   Russell King - ARM Linux
• [PATCH V5 13/63] ST SPEAr: Updating Clock Support   Russell King - ARM Linux
• [PATCH V5 29/63] ST SPEAr: Changing resource size of amba devices to SZ_4K   Russell King - ARM Linux
• [PATCH V5 30/63] ST SPEAr: Replacing SIZE macro's with actual required size   Russell King - ARM Linux
• [PATCH v4 15/19] ARM: LPAE: use phys_addr_t instead of unsigned long for physical addresses   Russell King - ARM Linux
• [PATCH v4 12/19] ARM: LPAE: Add context switching support   Russell King - ARM Linux
• [PATCH] msm: headsmp.S: Fix section mismatch   Russell King - ARM Linux
• [PATCH 1/5] ARM: smp: Select local timers vs dummy timer support runtime   Russell King - ARM Linux
• [PATCH 2/6] ARM: pm: add generic CPU suspend/resume support   Russell King - ARM Linux
• [RFC PATCH 2/2] ARMv7: Invalidate the TLB before freeing page tables   Russell King - ARM Linux
• [PATCH v2] ARM: vfp: Always save VFP state in vfp_pm_suspend   Russell King - ARM Linux
• Machine ID question   Russell King - ARM Linux
• [RFC,PATCH 1/3] Add a common struct clk   Russell King - ARM Linux
• [RFC,PATCH 1/3] Add a common struct clk   Russell King - ARM Linux
• barriers in mutexes?   Russell King - ARM Linux
• [PATCH] arm: imx: Zero entire imxdma structure   Russell King - ARM Linux
• [RFC PATCH 2/2] ARMv7: Invalidate the TLB before freeing page tables   Russell King - ARM Linux
• [PATCH V5 36/63] ST SPEAr : EMI (Extrenal Memory Interface) controller driver   Russell King - ARM Linux
• [PATCH V5 30/63] ST SPEAr: Replacing SIZE macro's with actual required size   Russell King - ARM Linux
• [PATCH 5/5] mmc: sdhci: add quirk SDHCI_QUIRK_FIX_NO_INT_IN_MULTI_BLK_IO   Russell King - ARM Linux
• [PATCH 5/5] mmc: sdhci: add quirk SDHCI_QUIRK_FIX_NO_INT_IN_MULTI_BLK_IO   Russell King - ARM Linux
• [RFC PATCH 2/2] ARMv7: Invalidate the TLB before freeing page tables   Russell King - ARM Linux
• [PATCH V5 30/63] ST SPEAr: Replacing SIZE macro's with actual required size   Russell King - ARM Linux
• [PATCH V5 30/63] ST SPEAr: Replacing SIZE macro's with actual required size   Russell King - ARM Linux
• Question About Linux Memory Mapping   Russell King - ARM Linux
• [PATCH v4 15/19] ARM: LPAE: use phys_addr_t instead of unsigned long for physical addresses   Russell King - ARM Linux
• [PATCH V4 3/4] ARM: Xilinx: base header files and assembly macros   Russell King - ARM Linux
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Russell King - ARM Linux
• [PATCH 3/5] ARM: tegra: update GPIO chained IRQ handler to use EOI in parent chip   Russell King - ARM Linux
• [PATCH] ARM: Fix compile after delay page freeing patch   Russell King - ARM Linux
• [PATCHv3] amba: support pm ops   Russell King - ARM Linux
• [PATCH] ARM: Fix compile after delay page freeing patch   Russell King - ARM Linux
• [PATCH] ARM: Thumb-2: Reflect ARM/Thumb-2 configuration in module vermagic   Russell King - ARM Linux
• [PATCH 1/6] ARM: tegra: add tegra_gpio_table and tegra_gpio_config   Russell King - ARM Linux
• [PATCH 6/6] ARM: tegra: add seaboard, wario and kaen boards   Russell King - ARM Linux
• [PATCH 5/7] ARM: tegra: timer: Enable timer and rtc clocks   Russell King - ARM Linux
• [PATCH] ARM: fix build failure   Russell King - ARM Linux
• [PATCH v3] dmaengine: mxs-dma: add dma support for i.MX23/28   Russell King - ARM Linux
• [PATCH v3] dmaengine: mxs-dma: add dma support for i.MX23/28   Russell King - ARM Linux
• [PATCH v3] dmaengine: mxs-dma: add dma support for i.MX23/28   Russell King - ARM Linux
• [PATCH v2 01/13] mfd: pruss mfd driver.   Russell King - ARM Linux
• [PATCH] nmk-gpio: use request_irq instead of chained handler   Russell King - ARM Linux
• CPU_V6K build failure in next-20110223   Russell King - ARM Linux
• [PATCH 1/5] ARM: smp: Select local timers vs dummy timersupport runtime   Russell King - ARM Linux
• [PATCH 1/5] ARM: smp: Select local timers vs dummytimersupport runtime   Russell King - ARM Linux
• [PATCH 1/5] ARM: smp: Select local timers vs dummytimersupportruntime   Russell King - ARM Linux
• [PATCH 5/5] ARM: Tegra: Enable Harmony audio support   Russell King - ARM Linux
• [PATCH 4/4] msm: scm: Get cacheline size from CTR   Russell King - ARM Linux
• [PATCH 2/4] msm: scm: Fix improper register assignment   Russell King - ARM Linux
• [PATCH 1/3] ARM: S5P: Add s5p_timer support for HRT   Russell King - ARM Linux
• [PATCH 1/2] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption   Russell King - ARM Linux
• [PATCH 6/8] ARM i.MX5: Allow to increase max zone order   Russell King - ARM Linux
• When does mach-types get updated in a tree?   Russell King - ARM Linux
• [PATCH 1/2] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption   Russell King - ARM Linux
• [PATCH V4 3/4] ARM: Xilinx: base header files and assembly macros   Russell King - ARM Linux
• [PATCH v10 05/18] OMAP2,3 DSS2 Change driver name to omap_display   Russell King - ARM Linux
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Russell King - ARM Linux
• [PATCH v10 05/18] OMAP2,3 DSS2 Change driver name to omap_display   Russell King - ARM Linux
• When does mach-types get updated in a tree?   Russell King - ARM Linux
• When does mach-types get updated in a tree?   Russell King - ARM Linux
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Russell King - ARM Linux
• [PATCH] mtd: nand: fix one typo in the comments   Jason Liu
• [PATCH 1/2] ARM: QQ2440 machine architecture   Ramax Lo
• Some trivial ARM fixes   Ryan Lortie
• [PATCH 1/2] ARM: imx35: fix ATA_DATA3 pad control address   Ryan Lortie
• [PATCH 2/2] ARM: imx35: fix trivial copy/paste error   Ryan Lortie
• [PATCH v5 0/5] omap: mailbox: hwmod support   Omar Ramirez Luna
• [PATCH v5 1/5] OMAP2: hwmod data: add mailbox data   Omar Ramirez Luna
• [PATCH v5 2/5] OMAP3: hwmod data: add mailbox data   Omar Ramirez Luna
• [PATCH v5 3/5] OMAP4: hwmod data: add mailbox data   Omar Ramirez Luna
• [PATCH v5 4/5] OMAP: mailbox: build device using omap_device/omap_hwmod   Omar Ramirez Luna
• [PATCH v5 5/5] OMAP: mailbox: use runtime pm for clk and sysc handling   Omar Ramirez Luna
• [PATCH v6 0/4] omap: mailbox: hwmod support   Omar Ramirez Luna
• [PATCH v6 1/4] OMAP2: hwmod data: add mailbox data   Omar Ramirez Luna
• [PATCH v6 2/4] OMAP3: hwmod data: add mailbox data   Omar Ramirez Luna
• [PATCH v6 3/4] OMAP: mailbox: build device using omap_device/omap_hwmod   Omar Ramirez Luna
• [PATCH v6 4/4] OMAP: mailbox: use runtime pm for clk and sysc handling   Omar Ramirez Luna
• [PATCH v5 0/3] add CNS3xxx AHCI support   Lin Mac
• [PATCH 0/7] Nexus One Support   Pavel Machek
• MMC quirks relating to performance/lifetime.   Pavel Machek
• [PATCH v2 2/2] msm: Use explicit GPLv2 licenses   Pavel Machek
• [RFC,PATCH 1/3] Add a common struct clk   Ryan Mallon
• [RFC,PATCH 1/3] Add a common struct clk   Ryan Mallon
• [RFC,PATCH 1/3] Add a common struct clk   Ryan Mallon
• [RFC,PATCH 1/3] Add a common struct clk   Ryan Mallon
• [RFC,PATCH 1/3] Add a common struct clk   Ryan Mallon
• [RFC,PATCH 2/3] clk: Generic support for fixed-rate clocks   Ryan Mallon
• [PATCH 1/2] AT91: Use macros for gpio_to_irq/irq_to_gpio   Ryan Mallon
• [PATCH 2/2] Add Snapper9260 rtc wakeup interrupt pin   Ryan Mallon
• [RFC,PATCH 1/3] Add a common struct clk   Ryan Mallon
• [PATCH 2/2] clk: Generic support for fixed-rate clocks   Ryan Mallon
• Linux support for Samsung S3C2510A Processor   Madhavi Manchala
• Linux support for Samsung S3C2510A Processor   Madhavi Manchala
• [PATCH] kbuild: reenable section mismatch analysis   Michal Marek
• [PATCH v4 09/19] ARM: LPAE: Page table maintenance for the 3-level format   Catalin Marinas
• [PATCH v4 08/19] ARM: LPAE: Introduce the 3-level page table format definitions   Catalin Marinas
• [PATCH v4 06/19] ARM: LPAE: Add (pte|pmd|pgd|pgprot)val_t type definitions as u32   Catalin Marinas
• [PATCH v4 09/19] ARM: LPAE: Page table maintenance for the 3-level format   Catalin Marinas
• [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels   Catalin Marinas
• [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels   Catalin Marinas
• [RFC PATCH 3/3] ARM: vfp: Use cpu pm notifiers to save vfp state   Catalin Marinas
• [RFC PATCH 3/3] ARM: vfp: Use cpu pm notifiers to save vfp state   Catalin Marinas
• [PATCH 0/2] Preserve the VFP state across the fork() call   Catalin Marinas
• [PATCH 1/2] ARM: Introduce THREAD_NOTIFY_COPY for copy_thread() hooks   Catalin Marinas
• [PATCH 2/2] ARM: Preserve the VFP state during fork   Catalin Marinas
• [PATCH] ARM: vfp: Always save VFP state in vfp_pm_suspend   Catalin Marinas
• [PATCH v4 16/19] ARM: LPAE: Use generic dma_addr_t type definition   Catalin Marinas
• [PATCH v4 12/19] ARM: LPAE: Add context switching support   Catalin Marinas
• [RFC PATCH 0/2] Support caching of higher page table level entries   Catalin Marinas
• [RFC PATCH 1/2] ARMv7: Use a reserved TTB rather than ASID 0 during context switch   Catalin Marinas
• [RFC PATCH 2/2] ARMv7: Invalidate the TLB before freeing page tables   Catalin Marinas
• [RFC PATCH 2/2] ARMv7: Invalidate the TLB before freeing page tables   Catalin Marinas
• [RFC PATCH 2/2] ARMv7: Invalidate the TLB before freeing page tables   Catalin Marinas
• [PATCH v4 15/19] ARM: LPAE: use phys_addr_t instead of unsigned long for physical addresses   Catalin Marinas
• [RFC PATCH 2/2] ARMv7: Invalidate the TLB before freeing page tables   Catalin Marinas
• [PATCH v4 16/19] ARM: LPAE: Use generic dma_addr_t type definition   Catalin Marinas
• [PATCH] ARM: errata: pl310 cache sync operation may be faulty   Catalin Marinas
• [PATCH] ARM: Improve the L2 cache performance when PL310 is used   Catalin Marinas
• [PATCH v2] ARM: vfp: Always save VFP state in vfp_pm_suspend   Catalin Marinas
• [PATCH] ARM: errata: pl310 cache sync operation may be faulty   Catalin Marinas
• [PATCH] ARM: errata: pl310 cache sync operation may be faulty   Catalin Marinas
• [PATCH] ARM: errata: pl310 cache sync operation may be faulty   Catalin Marinas
• [PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption   Catalin Marinas
• [PATCH 00/10] Fix CLCD framebuffer formats and consolidate ARM platform CLCD support   Catalin Marinas
• [PATCH 00/11] Rationalize and consolidate ARMs evaluation boards   Catalin Marinas
• [PATCH v4 12/19] ARM: LPAE: Add context switching support   Catalin Marinas
• [RFC PATCH 2/2] ARMv7: Invalidate the TLB before freeing page tables   Catalin Marinas
• [PATCH 1/2] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption   Catalin Marinas
• [RFC PATCH 2/2] ARMv7: Invalidate the TLB before freeing page tables   Catalin Marinas
• [PATCH] ARM: bitops: Fix low-level code to be Thumb-2 compatible   Dave Martin
• [PATCH] ARM: bitops: Fix low-level code to be Thumb-2 compatible   Dave Martin
• [PATCH] ARM: bitops: Use BX instead of MOV PC,LR   Dave Martin
• [PATCH REPOST] ARM: bitops: Use BX instead of MOV PC,LR   Dave Martin
• [PATCH v2 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Dave Martin
• [PATCH v2 1/5] ARM: omap4: Correct definition of do_wfi() for CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH v2 2/5] ARM: omap4: Convert END() to ENDPROC() for correct linkage with CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH v2 3/5] ARM: omap3: Remove hand-encoded SMC instructions   Dave Martin
• [PATCH v2 4/5] ARM: omap3: Thumb-2 compatibility for sram34xx.S   Dave Martin
• [PATCH v2 5/5] ARM: omap3: Thumb-2 compatibility for sleep34xx.S   Dave Martin
• [PATCH REPOST] ARM: bitops: Use BX instead of MOV PC,LR   Dave Martin
• [PATCH v2] ARM: bitops: Use BX instead of MOV PC,LR   Dave Martin
• [PATCH v2 1/5] ARM: omap4: Correct definition of do_wfi() forCONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH v2 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Dave Martin
• [PATCH v2 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Dave Martin
• [PATCH 2/2] ARM: Make CONFIG_FPE_NWFPE depend on !CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH] ARM: Thumb-2: Make CONFIG_OABI_COMPAT depend on !CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH] ARM: Define wfi(), wfe(), sev() macros for pre-v7 processors   Dave Martin
• [PATCH v3 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Dave Martin
• [PATCH v3 1/5] ARM: omap4: Replace custom do_wfi() with generic wfi()   Dave Martin
• [PATCH v3 2/5] ARM: omap4: Convert END() to ENDPROC() for correct linkage with CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH v3 3/5] ARM: omap3: Remove hand-encoded SMC instructions   Dave Martin
• [PATCH v3 4/5] ARM: omap3: Thumb-2 compatibility for sram34xx.S   Dave Martin
• [PATCH v3 5/5] ARM: omap3: Thumb-2 compatibility for sleep34xx.S   Dave Martin
• [PATCH v3 3/5] ARM: omap3: Remove hand-encoded SMC instructions   Dave Martin
• [PATCH v3.1] ARM: omap3: Remove hand-encoded SMC instructions   Dave Martin
• [PATCH v2 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Dave Martin
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Dave Martin
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Dave Martin
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Dave Martin
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Dave Martin
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Dave Martin
• [PATCH] ARM: Correct WFE() in asm/spinlock.h for Thumb-2   Dave Martin
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Dave Martin
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Dave Martin
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Dave Martin
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Dave Martin
• [PATCH] ARM: Correct WFE() in asm/spinlock.h for Thumb-2   Dave Martin
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Dave Martin
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Dave Martin
• [PATCH v2 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Dave Martin
• [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels   Dave Martin
• [PATCH v2 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Dave Martin
• [PATCH v4 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Dave Martin
• [PATCH v4 1/5] ARM: omap4: Provide do_wfi() for Thumb-2   Dave Martin
• [PATCH v4 2/5] ARM: omap4: Convert END() to ENDPROC() for correct linkage with CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH v4 3/5] ARM: omap3: Remove hand-encoded SMC instructions   Dave Martin
• [PATCH v4 4/5] ARM: omap3: Thumb-2 compatibility for sram34xx.S   Dave Martin
• [PATCH v4 5/5] ARM: omap3: Thumb-2 compatibility for sleep34xx.S   Dave Martin
• [PATCH] ARM: Correct WFE() in asm/spinlock.h for Thumb-2   Dave Martin
• [PATCH] ARM: Avoid discarding sections that might have SMP_ON_UP fixups   Dave Martin
• [PATCH] ARM: Avoid discarding sections that might have SMP_ON_UP fixups   Dave Martin
• [PATCH] ARM: Avoid discarding sections that might have SMP_ON_UP fixups   Dave Martin
• ARM: relocation out of range (when loading a module)   Dave Martin
• [PATCH] ARM: Avoid discarding sections that might have SMP_ON_UP fixups   Dave Martin
• [PATCH v2 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Dave Martin
• [PATCH v2 5/5] ARM: omap3: Thumb-2 compatibility for sleep34xx.S   Dave Martin
• ARM: relocation out of range (when loading a module)   Dave Martin
• [PATCH] ARM: Avoid discarding sections that might have SMP_ON_UP fixups   Dave Martin
• [PATCH v2 5/5] ARM: omap3: Thumb-2 compatibility for sleep34xx.S   Dave Martin
• ARM: relocation out of range (when loading a module)   Dave Martin
• [PATCH] ARM: Avoid discarding sections that might have SMP_ON_UP fixups   Dave Martin
• [PATCH 2/2] P2V: Thumb2 support   Dave Martin
• [PATCH 2/2] P2V: Thumb2 support   Dave Martin
• [PATCH v4 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Dave Martin
• [PATCH 2/2] P2V: Thumb2 support   Dave Martin
• [PATCH v4 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Dave Martin
• [PATCH] Ensure predictable endian state on signal handler entry   Dave Martin
• [PATCH v4 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Dave Martin
• [PATCH] ARM: Thumb-2: Enable ARM/Thumb interworking for v7 cache maintenance   Dave Martin
• compiling 2.6.37 kernel in THUMB2 mode   Dave Martin
• compiling 2.6.37 kernel in THUMB2 mode   Dave Martin
• [PATCH] ARM: Thumb-2: Enable ARM/Thumb interworking for v7 cache maintenance   Dave Martin
• [PATCH] ARM: Avoid discarding sections that might have SMP_ON_UP fixups   Dave Martin
• compiling 2.6.37 kernel in THUMB2 mode   Dave Martin
• [klibc] fwd: fix up ARM assembly to use 'bx lr' in place of 'mov pc, lr'.   Dave Martin
• [PATCH v5 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Dave Martin
• [PATCH v5 1/5] ARM: omap4: Provide do_wfi() for Thumb-2   Dave Martin
• [PATCH v5 2/5] ARM: omap4: Convert END() to ENDPROC() for correct linkage with CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH v5 3/5] ARM: omap3: Remove hand-encoded SMC instructions   Dave Martin
• [PATCH v5 4/5] ARM: omap3: Thumb-2 compatibility for sram34xx.S   Dave Martin
• [PATCH v5 5/5] ARM: omap3: Thumb-2 compatibility for sleep34xx.S   Dave Martin
• compiling 2.6.37 kernel in THUMB2 mode   Dave Martin
• [PATCH] ARM: Avoid discarding sections that might have SMP_ON_UP fixups   Dave Martin
• [PATCH] ARM: Thumb-2: Reflect ARM/Thumb-2 configuration in module vermagic   Dave Martin
• [PATCH v2] ARM: Thumb-2: Reflect ARM/Thumb-2 configuration in module vermagic   Dave Martin
• [PATCH v2] ARM: Thumb-2: Reflect ARM/Thumb-2 configuration in module vermagic   Dave Martin
• [PATCH v2] ARM: Thumb-2: Reflect ARM/Thumb-2 configuration in module vermagic   Dave Martin
• [PATCH] ARM: Thumb-2: Work around buggy Thumb-2 short branch relocations in gas   Dave Martin
• [PATCH 1/4] ASoC: Add TI tlv320aic32x4 codec support.   Javier Martin
• [PATCH 2/4] ASoC: Fix burstsize and DSP_B format problems in imx-ssi.   Javier Martin
• [PATCH 3/4] ASoC: Add machine driver for Visstrim_M10 board.   Javier Martin
• [PATCH 4/4] ARM: Add SSI and aic3204 code to Visstrim_M10 boards.   Javier Martin
• [PATCH 03/20] mach-omap2: smartreflex: world-writable debugfs voltage files   Menon, Nishanth
• [PATCH] PM: OPP: opp_find_freq_exact documentation fix   Nishanth Menon
• [PATCH] ARM: pxa: Properly configure PWM period for palm27x   Eric Miao
• [GIT PULL] pxa: fixes for v2.6.38-rc4   Eric Miao
• ARM: mmp: add Trizeps6 board support   Eric Miao
• [PATCH]ARM: mmp: add Trizeps6 board support   Eric Miao
• [PATCH]ARM: mmp: add Trizeps6 board support   Eric Miao
• [PATCH V3 0/6] pxa3xx_nand update series set   Eric Miao
• [PATCH V3 2/6] pxa3xx_nand: rework irq logic   Eric Miao
• [PATCH V3 3/6] pxa3xx_nand: discard wait_for_event, write_cmd, __readid function   Eric Miao
• [PATCH] ARM: PXA: Make PXA27x/PXA3xx overlay actually work   Eric Miao
• [PATCH] Clean up set_pxa_fb_info   Eric Miao
• [PATCH] ARM: PXA: Make PXA27x/PXA3xx overlay actually work   Eric Miao
• [PATCH] ARM: PXA: Make PXA27x/PXA3xx overlay actually work   Eric Miao
• [PATCH] ARM: PXA: Make PXA27x/PXA3xx overlay actually work   Eric Miao
• [PATCH] ARM: PXA: Make PXA27x/PXA3xx overlay actually work   Eric Miao
• [PATCH] Clean up set_pxa_fb_info   Eric Miao
• [RFC 1/5] ARM: P2V: separate PHYS_OFFSET from platform definitions   Eric Miao
• [RFC 2/5] ARM: P2V: avoid initializers and assembly using PHYS_OFFSET   Eric Miao
• [PATCH 1/2] ARM: PXA: PXAFB: Fix double-free issue.   Eric Miao
• [PATCH] tosa-bt: drop setting LED trigger name, as it's unsupported now   Eric Miao
• [PATCH 4/5] pxa25x_udc: stop handling gpio-vbus internally   Eric Miao
• [PATCH] ARM: pxa: support 806MHz operating points for PXA31x processors A2 stepping   Eric Miao
• [PATCH] colibri : don't register pxa2xx-pcmcia nodes on non-colibri platforms   Eric Miao
• [PATCH 1/3] pxa: Enable pxa-pcm-audio on pxa210/pxa25x platform   Eric Miao
• [GIT PULL] pxa: fixes for v2.6.38-rc6   Eric Miao
• [PATCH V3 4/4] mmc: sdhci-esdhc: enable esdhc on imx53   Eric Miao
• ARM unaligned MMIO access with attribute((packed))   David Miller
• ARM unaligned MMIO access with attribute((packed))   David Miller
• ARM unaligned MMIO access with attribute((packed))   David Miller
• [PATCH 2/2] DM9000B: Fix PHY power for network down/up   David Miller
• [PATCHv2 2/2] DM9000B: Fix PHY power for network down/up   David Miller
• [PATCH] arm: imx: Zero entire imxdma structure   Ilia Mirkin
• [PATCH] arm: imx: Zero entire imxdma structure   Ilia Mirkin
• [PATCH] arm: Improve MMC performance on Versatile Express   Pawel Moll
• [PATCH] arm: Improve MMC performance on Versatile Express   Pawel Moll
• [PATCH] arm: Improve MMC performance on Versatile Express   Pawel Moll
• [PATCH] arm: Place correctly notes section in the linker script   Pawel Moll
• [RFC] MMC: error handling improvements   Pawel Moll
• [PATCH v4 1/4] drivers: hwspinlock: add framework   Andrew Morton
• [PATCH v4 1/4] drivers: hwspinlock: add framework   Andrew Morton
• [PATCH V3 1/1] ST SPEAr: PCIE gadget suppport   Andrew Morton
• [PATCH V3 1/1] ST SPEAr: PCIE gadget suppport   Andrew Morton
• [PATCH V3 1/1] ST SPEAr: PCIE gadget suppport   Andrew Morton
• [PATCH V5 Resend] ST SPEAr: PCIE gadget suppport   Andrew Morton
• [PATCH 1/2] lib: vsprintf: optimised put_dec() function   Andrew Morton
• [PATCH] drivers: ld9040 amoled driver support   Andrew Morton
• [PATCH 1/3] msm: iommu: Create a Kconfig item for the IOMMU driver   Stepan Moskovchenko
• [PATCH 2/3] msm: iommu: Generalize platform data for multiple targets   Stepan Moskovchenko
• [PATCH 3/3] msm: iommu: Enable IOMMU support for MSM8960   Stepan Moskovchenko
• Compilation error in ARM NOMMU kernel due to fixup_smp change   Stepan Moskovchenko
• [PATCH 1/4] msm: iommu: Clock control for the IOMMU driver   Stepan Moskovchenko
• [PATCH 2/4] msm: iommu: Rework clock logic and add IOMMU bus clock control   Stepan Moskovchenko
• [PATCH 3/4] msm: iommu: Use ASID tagging instead of VMID tagging   Stepan Moskovchenko
• [PATCH 4/4] msm: iommu: Remove dependency on IDR   Stepan Moskovchenko
• [PATCH] arm: Footbridge: Fix I/O mappings for NOMMU mode   Stepan Moskovchenko
• [PATCH 2/4] msm: iommu: Rework clock logic and add IOMMU bus clock control   Stepan Moskovchenko
• [PATCH v2 2/4] msm: iommu: Rework clock logic and add IOMMU bus clock control   Stepan Moskovchenko
• [PATCH 1/2] msm: iommu: Don't read from write-only registers   Stepan Moskovchenko
• [PATCH 2/2] msm: iommu: Enable HTW L2 redirection on MSM8960   Stepan Moskovchenko
• barriers in mutexes?   Steve Muckle
• barriers in mutexes?   Steve Muckle
• [PATCH 2/3] msm: iommu: Generalize platform data for multiple targets   Steve Muckle
• [PATCH 2/3] msm: iommu: Generalize platform data for multiple targets   Steve Muckle
• [PATCH] OMAP4: PandaBoard: Adding DVI support   Raghuveer Murthy
• ARM unaligned MMIO access with attribute((packed))   Joseph S. Myers
• [PATCH 1/2] mtd: nand: Allow NAND chip ids to be included standalone.   Murali Nalajala
• [PATCH 2/2] mtd: msm_nand: Add initial msm nand driver support.   Murali Nalajala
• [PATCH/RFC 2/3] ARM: S5PV310: Add a platform helper for MIPI DSIM/CSIS setup   Sylwester Nawrocki
• [PATCH v2] ARM: S5PV210: Add GONI board setup for CIF camera support   Sylwester Nawrocki
• [PATCH v2 1/3] ARM: S5PV210: Enable I2C0 bus on GONI board   Sylwester Nawrocki
• [PATCH v2 2/3] ARM: S5PV210: Add supplies for CIF camera on GONI board   Sylwester Nawrocki
• [PATCH v2 3/3] ARM: S5PV210: Change framebuffer window 0 size on GONI   Sylwester Nawrocki
• [PATCH/RFC] ARM: S5P: Add platform helpers for camera GPIO configuration   Sylwester Nawrocki
• [PATCH] ARM: S5P: Add platform helpers for camera GPIO configuration   Sylwester Nawrocki
• [PATCH v2] ARM: S5PV210: Add GONI board setup for CIF camera support   Sylwester Nawrocki
• [PATCH v2] ARM: S5PV210: Add GONI board setup for CIF camera support   Sylwester Nawrocki
• SAMSUNG: any example code for soc_camera, tv output, etc...?   Sylwester Nawrocki
• [PATCH] ARM: S5P: Add platform helpers for camera GPIO configuration   Sylwester Nawrocki
• [PATCH 4/6] omap4: dpll: Enable all DPLL autoidle at boot   Rajendra Nayak
• [PATCH 1/6] omap4: powerdomain: Add supported INACTIVE power state   Rajendra Nayak
• [PATCH v2] OMAP: hwmod: Do not expect an entry in clkdev for opt_clks   Rajendra Nayak
• [PATCH 0/2] Fix/Clean regulator consumer mapping for 3430sdp   Rajendra Nayak
• [PATCH 1/2] omap3sdp: Fix regulator mapping for ads7846 TS controller   Rajendra Nayak
• [PATCH 2/2] omap3sdp: clean regulator supply mapping in board file   Rajendra Nayak
• [PATCH 1/2] omap3sdp: Fix regulator mapping for ads7846 TS controller   Rajendra Nayak
• [PATCH v2 0/2] Fix/Clean regulator consumer mapping for 3430sdp   Rajendra Nayak
• [PATCH v2 1/2] omap3sdp: Fix regulator mapping for ads7846 TS controller   Rajendra Nayak
• [PATCH v2 2/2] omap3sdp: clean regulator supply mapping in board file   Rajendra Nayak
• [PATCH 0/3] OMAP4 static dependency support   Rajendra Nayak
• [PATCH 1/3] OMAP4: clockdomain: Add clkdm static dependency srcs   Rajendra Nayak
• [PATCH 2/3] OMAP4: CM: Add CM accesor api for bitwise control   Rajendra Nayak
• [PATCH 3/3] OMAP4: clockdomain: Add wkup/sleep dependency support   Rajendra Nayak
• [PATCH v2 4/9] omap: clocks: Add checks to see if enable/disable ops are supported   Rajendra Nayak
• [PATCH v2 6/9] omap: dpll: Add allow_idle/deny_idle support for all DPLL's   Rajendra Nayak
• [PATCH v2 6/9] omap: dpll: Add allow_idle/deny_idle support for all DPLL's   Rajendra Nayak
• [PATCH 0/7] clock/dpll autoidle support   Rajendra Nayak
• [PATCH 1/7] omap: clock: Check for enable/disable ops support   Rajendra Nayak
• [PATCH 2/7] omap3: dpll: Populate clkops for dpll1_ck   Rajendra Nayak
• [PATCH 3/7] omap: clock: Add allow_idle/deny_idle support in clkops   Rajendra Nayak
• [PATCH 4/7] omap: dpll: Add allow_idle/deny_idle support for all DPLL's   Rajendra Nayak
• [PATCH 5/7] omap: dpll: Enable all OMAP3/4 dpll autoidle late at boot   Rajendra Nayak
• [PATCH 6/7] omap4: dpll: Add dpll api to control GATE_CTRL   Rajendra Nayak
• [PATCH 7/7] omap4: dpll: Enable auto gate control for all MX postdividers   Rajendra Nayak
• [PATCH] OMAP: clockdomain: Arch specific funcs to handle deps   Rajendra Nayak
• [PATCH 0/7] clock/dpll autoidle support   Rajendra Nayak
• [PATCH v2 0/7] clock/dpll autoidle support   Rajendra Nayak
• [PATCH v2 1/7] omap: clock: Check for enable/disable ops support   Rajendra Nayak
• [PATCH v2 2/7] omap3: dpll: Populate clkops for dpll1_ck   Rajendra Nayak
• [PATCH v2 3/7] omap: clock: Add allow_idle/deny_idle support in clkops   Rajendra Nayak
• [PATCH v2 4/7] omap: dpll: Add allow_idle/deny_idle support for all DPLL's   Rajendra Nayak
• [PATCH v2 5/7] omap: dpll: Enable all OMAP3/4 dpll autoidle late at boot   Rajendra Nayak
• [PATCH v2 6/7] omap4: dpll: Add dpll api to control GATE_CTRL   Rajendra Nayak
• [PATCH v2 7/7] omap4: dpll: Enable auto gate control for all MX postdividers   Rajendra Nayak
• [PATCH 3/3] OMAP4: clockdomain: Add wkup/sleep dependency support   Rajendra Nayak
• [PATCH v2 2/5] OMAP: clockdomain: Arch specific funcs to handle deps   Rajendra Nayak
• [PATCH 3/3] OMAP4: clockdomain: Add wkup/sleep dependency support   Rajendra Nayak
• [PATCH 3/3] OMAP4: clockdomain: Add wkup/sleep dependency support   Rajendra Nayak
• [PATCH] OMAP4: clockdomain: Remove pr_errs' stating unsupported wkdep   Rajendra Nayak
• [PATCH 3/3] OMAP4: clockdomain: Add wkup/sleep dependency support   Rajendra Nayak
• [PATCH 1/7] omap: clock: Check for enable/disable ops support   Rajendra Nayak
• [PATCH] OMAP: clock: Fix compile break with a   Rajendra Nayak
• [PATCH v2 3/7] omap: clock: Add allow_idle/deny_idle support in clkops   Rajendra Nayak
• [PATCH v2 4/7] omap: dpll: Add allow_idle/deny_idle support for all DPLL's   Rajendra Nayak
• [PATCH v2 5/7] omap: dpll: Enable all OMAP3/4 dpll autoidle late at boot   Rajendra Nayak
• [PATCH v2 7/7] omap4: dpll: Enable auto gate control for all MX postdividers   Rajendra Nayak
• [PATCH] OMAP2+: PM: Enable all clk autoidle only if CONFIG_PM   Rajendra Nayak
• [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx   Rajendra Nayak
• [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx   Rajendra Nayak
• [PATCH] OMAP2+: PM: Warn users of sleep_while_idle if !CONFIG_CPU_IDLE   Rajendra Nayak
• [PATCH 0/3] OMAP2+ hwmod fixes   Rajendra Nayak
• [PATCH 1/3] OMAP2+: hwmod: Avoid setup if clock lookup failed   Rajendra Nayak
• [PATCH 2/3] OMAP2+: hwmod: Fix what _init_clock returns   Rajendra Nayak
• [PATCH 3/3] OMAP2+: hwmod: Do not break iterator fn's if one fails   Rajendra Nayak
• [PATCH v2 0/2] Fix/Clean regulator consumer mapping for 3430sdp   Rajendra Nayak
• [PATCH 0/3] OMAP2+ hwmod fixes   Rajendra Nayak
• [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx   Rajendra Nayak
• [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx   Rajendra Nayak
• [PATCH 0/3] OMAP2+ hwmod fixes   Rajendra Nayak
• [PATCH 0/3] OMAP2+ hwmod fixes   Rajendra Nayak
• [PATCH] OMAP4: voltage: Populate missing .vp/.vc_common pointers   Rajendra Nayak
• [PATCH 0/3] OMAP2+: voltage: first pass at cleanup/reorganization   Rajendra Nayak
• [PATCH] ldp: Fix regulator mapping for ads7846 TS controller   Rajendra Nayak
• [PATCH] OMAP4: clock: Support divider selection for auxclks   Rajendra Nayak
• [PATCH 0/3] OMAP2+: voltage: first pass at cleanup/reorganization   Rajendra Nayak
• [PATCHv8 07/12] mm: cma: Contiguous Memory Allocator added   Michal Nazarewicz
• [PATCH 1/2] lib: vsprintf: optimised put_dec() function   Michal Nazarewicz
• [PATCH 1/2] lib: vsprintf: optimised put_dec() function   Michal Nazarewicz
• [PATCH] OMAP4: PandaBoard: Adding DVI support   Robert Nelson
• [PATCH] OMAP4: PandaBoard: Adding DVI support   Robert Nelson
• [PATCH 2/2] DM9000B: Fix PHY power for network down/up   Henry Nestler
• [PATCH 2/2] DM9000B: Fix PHY power for network down/up   Henry Nestler
• [PATCH 2/2] DM9000B: Fix PHY power for network down/up   Henry Nestler
• [PATCHv2 2/2] DM9000B: Fix PHY power for network down/up   Henry Nestler
• [PATCH v4] dw_mmc: Add Synopsys DesignWare mmc host driver.   Will Newton
• [PATCH v4] dw_mmc: Add Synopsys DesignWare mmc host driver.   Will Newton
• [PATCH 2/2 v2] dma: ipu_idmac: do not lose valid received data in the irq handler   Markus Niebel
• [PATCH 2/2 v2] dma: ipu_idmac: do not lose valid received data in the irq handler   Markus Niebel
• [PATCH] arm: mach-omap2: board-rm680: fix rm680_vemmc regulator constraints   Jarkko Nikula
• [PATCH] omap3: cpuidle: Add description field to each C-state.   Jarkko Nikula
• [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()   Jarkko Nikula
• [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()   Jarkko Nikula
• [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL   Jarkko Nikula
• [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL   Jarkko Nikula
• [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL   Jarkko Nikula
• [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL   Jarkko Nikula
• [PATCH resend] omap: Fix linker error in drivers/video/omap/lcd_2430sdp.c   Jarkko Nikula
• [PATCH resend] omap: rx51: Add SI4713 FM transmitter   Jarkko Nikula
• [PATCH resend] omap: rx51: Add SI4713 FM transmitter   Jarkko Nikula
• [PATCHv2] omap: rx51: Add SI4713 FM transmitter   Jarkko Nikula
• [PATCH resend] omap: Fix linker error in drivers/video/omap/lcd_2430sdp.c   Jarkko Nikula
• [PATCH] OMAP2/3/4: DSS2: Enable Display SubSystem as modules   Nilofer, Samreen
• [PATCH 4/4] davinci: add spi devices support for da830/omap-l137/am17x evm   Nori, Sekhar
• [PATCH 2/4] davinci: add spi devices support for MityDSP-L138/MityARM-1808 platform   Nori, Sekhar
• [PATCH 4/4] davinci: add spi devices support for da830/omap-l137/am17x evm   Nori, Sekhar
• [PATCH v1 1/4] davinci: da8xx/omap-l1: add support for SPI   Nori, Sekhar
• [PATCH v1 1/4] davinci: da8xx/omap-l1: add support for SPI   Nori, Sekhar
• [PATCH v1 0/9] pruss mfd drivers   Nori, Sekhar
• [PATCH v1 0/9] pruss mfd drivers   Nori, Sekhar
• [PATCH v1 1/4] davinci: da8xx/omap-l1: add support for SPI   Nori, Sekhar
• [PATCH v1] davinci: spi: move event queue parameter to platform data   Nori, Sekhar
• [PATCH] DaVinci: fix compilation warnings in <mach/clkdev.h>   Nori, Sekhar
• [PATCH v2 3/6] davinci: da8xx: add spi resources and registration routine   Nori, Sekhar
• [PATCH v2 5/6] davinci: add spi devices support for da850/omap-l138/am18x evm   Nori, Sekhar
• [PATCH] DaVinci: fix compilation warnings in <mach/clkdev.h>   Nori, Sekhar
• [PATCH v3 7/9] davinci: add spi devices support for MityDSP-L138/MityARM-1808 platform   Nori, Sekhar
• [PATCH 1/1] da830: macro rename DA8XX_LPSC0_DMAX to DA8XX_LPSC0_PRUSS.   Nori, Sekhar
• [PATCH 1/1] davinci: changed SRAM allocator to shared ram.   Nori, Sekhar
• [PATCH 1/1] davinci: changed SRAM allocator to shared ram.   Nori, Sekhar
• [PATCH v4 0/4] davinci: add spi devices support for da8xx based platforms   Nori, Sekhar
• [PATCH] DA850 EVM: kill useless variable   Nori, Sekhar
• [PATCH v4 2/2] Defines DA850/AM18xx/OMAPL1-38 SOC resources used by PRUSS UIO driver   Nori, Sekhar
• [PATCH] davinci: cpufreq: fix section mismatch warning   Nori, Sekhar
• [PATCH 3/9] Add a mfd IPUv3 driver   Samuel Ortiz
• [PATCH 3/9] Add a mfd IPUv3 driver   Samuel Ortiz
• [PATCH 3/9] Add a mfd IPUv3 driver   Samuel Ortiz
• [PATCH 1/7] Add a mfd IPUv3 driver   Samuel Ortiz
• [PATCH v2 01/13] mfd: pruss mfd driver.   Samuel Ortiz
• mc13xxx-core, support for i2c, V4   Samuel Ortiz
• [PATCH v2 01/13] mfd: pruss mfd driver.   Samuel Ortiz
• [PATCH v2 01/13] mfd: pruss mfd driver.   Samuel Ortiz
• [to be tested] [PATCH] at91: switch to CLKDEV_LOOKUP   Jean-Christophe PLAGNIOL-VILLARD
• [RFC 1/5] ARM: P2V: separate PHYS_OFFSET from platform definitions   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] atmel/macb: fix device name when SOFT/HARD_IRQ enabled   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] usb: gadget: at91_udc: Fix error path   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] atmel_serial: enable PPS support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] atmel_serial: enable PPS support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] atmel/macb: fix device name when SOFT/HARD_IRQ enabled   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] AT91: Use macros for gpio_to_irq/irq_to_gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] Add Snapper9260 rtc wakeup interrupt pin   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] atmel/macb: fix device name when SOFT/HARD_IRQ enabled   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] arm: mach-at91: remove double-semicolons   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/11] ARM: EXYNOS4: Change ARCH name, ARCH_EXYNOS4 from ARCH_S5PV310   Kyungmin Park
• [PATCH 0/11] ARM: EXYNOS4: Change ARCH name, ARCH_EXYNOS4 from ARCH_S5PV310   Kyungmin Park
• [PATCH 0/11] ARM: EXYNOS4: Change ARCH name, ARCH_EXYNOS4 from ARCH_S5PV310   Kyungmin Park
• [PATCH 4/5] ARM: s5pv310: update IRQ combiner to use EOI in parent chip   Kyungmin Park
• [PATCH] ARM: EXYNOS4: Fix wrong constants in the hotplug assembly code.   Kyungmin Park
• [PATCH 2/3] ARM: S5P: Update machine initialization for HRT   Kyungmin Park
• [PATCH 1/3] ARM: S5P: Add s5p_timer support for HRT   Kyungmin Park
• [PATCH 6/6] ARM: S5PV210: Add PWM backlight support on SMDKV210   Kyungmin Park
• [PATCH V4] ARM: EXYNOS4: Implement kernel timers using MCT   Kyungmin Park
• [PATCH RESEND v6 0/4] Introduce support for TI816X processor series   Hemant Pedanekar
• [PATCH RESEND v6 1/4] TI816X: Update common omap platform files   Hemant Pedanekar
• [PATCH RESEND v6 2/4] TI816X: Update common OMAP machine specific sources   Hemant Pedanekar
• [PATCH RESEND v6 3/4] TI816X: Create board support and enable build for TI816X EVM   Hemant Pedanekar
• [PATCH RESEND v6 4/4] TI816X: Add low level debug support   Hemant Pedanekar
• [PATCH RESEND v6 2/4] TI816X: Update common OMAP machine specific sources   Pedanekar, Hemant
• [PATCH v7 0/4] Introduce support for TI816X processor series   Hemant Pedanekar
• [PATCH v7 1/4] TI816X: Update common omap platform files   Hemant Pedanekar
• [PATCH v7 2/4] TI816X: Update common OMAP machine specific sources   Hemant Pedanekar
• [PATCH v7 3/4] TI816X: Create board support and enable build for TI816X EVM   Hemant Pedanekar
• [PATCH v7 4/4] TI816X: Add low level debug support   Hemant Pedanekar
• "Porting the Linux Kernel to a New ARM Platform", updated...?   Nick Pelling
• SAMSUNG: any example code for soc_camera, tv output, etc...?   Nick Pelling
• SAMSUNG: any example code for soc_camera, tv output, etc...?   Nick Pelling
• [PATCH] picoxcell_crypto: add support for the picoxcell crypto engines   Kim Phillips
• [PATCH v3 2/5] ARM: pm: add generic CPU suspend/resume support   Lorenzo Pieralisi
• [PATCH v3 2/5] ARM: pm: add generic CPU suspend/resume support   Lorenzo Pieralisi
• [RFC PATCH] ARM: pmu: add OF match support   Lorenzo Pieralisi
• [PATCH 2/6] ARM: pm: add generic CPU suspend/resume support   Lorenzo Pieralisi
• Help - Getting started   Daniel F. Pigatto
• [PATCH v5 3/5] ARM: omap3: Remove hand-encoded SMC instructions   Jean Pihet
• [PATCH v5 5/5] ARM: omap3: Thumb-2 compatibility for sleep34xx.S   Jean Pihet
• [PATCH v5 4/5] ARM: omap3: Thumb-2 compatibility for sram34xx.S   Jean Pihet
• [PATCH] perf: add OMAP support for the new power events   Jean Pihet
• [PATCH 14/17] omap4: cpuidle: Add MPUSS RET OFF states   Jean Pihet
• [PATCH] perf: add OMAP support for the new power events   Jean Pihet
• [PATCH v3 2/5] ARM: pm: add generic CPU suspend/resume support   Jean Pihet
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Nicolas Pitre
• advice needed on how best to fix kirkwood kexec   Nicolas Pitre
• fixes to the p2v series   Nicolas Pitre
• [PATCH] Kirkwood: enable PCIe for kexec   Nicolas Pitre
• [PATCH] ARM: bitops: Fix low-level code to be Thumb-2 compatible   Nicolas Pitre
• [PATCH] ARM: bitops: Fix low-level code to be Thumb-2 compatible   Nicolas Pitre
• [PATCH v2] ARM: kexec: selective MMU identity mapping   Nicolas Pitre
• [PATCH] ARM: bitops: Fix low-level code to be Thumb-2 compatible   Nicolas Pitre
• fixes to the p2v series   Nicolas Pitre
• [PATCH v2] ARM: kexec: selective MMU identity mapping   Nicolas Pitre
• [PATCH v2 1/3] add machine-specific hook to machine_kexec   Nicolas Pitre
• [PATCH v2] ARM: kexec: selective MMU identity mapping   Nicolas Pitre
• [PATCH RFC] ARM: Make VMALLOC_END a variable   Nicolas Pitre
• [PATCH RFC] ARM: Make VMALLOC_END a variable   Nicolas Pitre
• [PATCH v2] ARM: bitops: Use BX instead of MOV PC,LR   Nicolas Pitre
• [PATCH 0/2] Allow using machine ID for DEBUG_LL macros   Nicolas Pitre
• [PATCH 1/2] ARM: Add inituart macro to initialize DEBUG_LL serial port based on the machine ID   Nicolas Pitre
• [PATCH 2/2] ARM: Add empty inituart macros   Nicolas Pitre
• [PATCH 3/5] omap: Add support for CONFIG_AUTO_ZRELADDR for DEBUG_LL   Nicolas Pitre
• [PATCH 0/2] Allow using machine ID for DEBUG_LL macros   Nicolas Pitre
• [RFC 1/2] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Nicolas Pitre
• [RFC 2/2] ARM:boot:device tree: Merge specific atags into the device tree   Nicolas Pitre
• [PATCH 3/5] omap: Add support for CONFIG_AUTO_ZRELADDR for DEBUG_LL   Nicolas Pitre
• [PATCH] ARM: Thumb-2: Make CONFIG_OABI_COMPAT depend on !CONFIG_THUMB2_KERNEL   Nicolas Pitre
• [PATCH 3/5] omap: Add support for CONFIG_AUTO_ZRELADDR for DEBUG_LL   Nicolas Pitre
• [RFC, PATCH 3/3] clk: add warnings for incorrect enable/prepare semantics   Nicolas Pitre
• [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels   Nicolas Pitre
• [PATCH v4 1/5] ARM: omap4: Provide do_wfi() for Thumb-2   Nicolas Pitre
• [PATCH] ARM: Correct WFE() in asm/spinlock.h for Thumb-2   Nicolas Pitre
• [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels   Nicolas Pitre
• [PATCH v2] ARM: ptrace: remove single-step emulation code   Nicolas Pitre
• ARM: relocation out of range (when loading a module)   Nicolas Pitre
• ARM: relocation out of range (when loading a module)   Nicolas Pitre
• ARM: relocation out of range (when loading a module)   Nicolas Pitre
• [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels   Nicolas Pitre
• The p2v branch   Nicolas Pitre
• [PATCH 1/2] ARM: ignore mdesc->boot_params if out of range   Nicolas Pitre
• [PATCH 2/2] P2V: Thumb2 support   Nicolas Pitre
• The p2v branch   Nicolas Pitre
• ARM: relocation out of range (when loading a module)   Nicolas Pitre
• The p2v branch   Nicolas Pitre
• [PATCH 2/2] P2V: Thumb2 support   Nicolas Pitre
• The p2v branch   Nicolas Pitre
• [PATCH 2/2] P2V: Thumb2 support   Nicolas Pitre
• [PATCH v4 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Nicolas Pitre
• [PATCH 2/4] arm: configs: update mmp2 defconfig for brownstone and SoC Selection   Nicolas Pitre
• [PATCH v4 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Nicolas Pitre
• [PATCH] ARM: Thumb-2: Enable ARM/Thumb interworking for v7 cache maintenance   Nicolas Pitre
• compiling 2.6.37 kernel in THUMB2 mode   Nicolas Pitre
• The p2v branch   Nicolas Pitre
• [PATCH 1/2] ARM: improvements to compressed/head.S   Nicolas Pitre
• [PATCH 2/2] ARM: remove the 4x expansion presumption while decompressing the kernel   Nicolas Pitre
• [PATCH 2/2] ARM: remove the 4x expansion presumption while decompressing the kernel   Nicolas Pitre
• [PATCH 2/2] ARM: remove the 4x expansion presumption while decompressing the kernel   Nicolas Pitre
• [PATCH 2/2] ARM: remove the 4x expansion presumption while decompressing the kernel   Nicolas Pitre
• [PATCH] ARM: fold lookup_machine_type() into setup_machine()   Nicolas Pitre
• The p2v branch   Nicolas Pitre
• Question About Linux Memory Mapping   Nicolas Pitre
• [RFC] orion5x: TS-78XX support for FPGA generated doorbell IRQ's   Nicolas Pitre
• bug in arm_kprobe_decode_insn   Nicolas Pitre
• [PATCH] ARM: Thumb-2: Reflect ARM/Thumb-2 configuration in module vermagic   Nicolas Pitre
• [PATCH] ARM: Thumb-2: Reflect ARM/Thumb-2 configuration in module vermagic   Nicolas Pitre
• [PATCH] msm: add single-wire serial bus interface (SSBI) driver   Nicolas Pitre
• [PATCH v4 7/7] dt: add documentation of ARM dt boot interface   Nicolas Pitre
• [PATCH] msm: add single-wire serial bus interface (SSBI) driver   Nicolas Pitre
• [PATCH v2 1/2] MAINTAINERS: Add drivers/msm to MSM subsystem   Nicolas Pitre
• [PATCH 1/4] msm: scm: Mark inline asm as volatile   Nicolas Pitre
• [PATCH 2/4] msm: scm: Fix improper register assignment   Nicolas Pitre
• [PATCH 1/4] msm: scm: Mark inline asm as volatile   Nicolas Pitre
• [PATCH] ARM: Thumb-2: Work around buggy Thumb-2 short branch relocations in gas   Nicolas Pitre
• [PATCHv2 1/2] ads7846: OMAP3: Removal of warnings backtrace in bootup   Sourav Poddar
• [PATCHv2 2/2] Input: ads7846 - configure pendown gpio as input   Sourav Poddar
• [PATCHv2 1/2] ads7846: OMAP3: Removal of warnings backtrace in bootup   Poddar, Sourav
• [PATCHv2 1/2] ads7846: OMAP3: Removal of warnings backtrace in bootup   Poddar, Sourav
• [PATCHv2 2/2] Input: ads7846 - configure pendown gpio as input   Poddar, Sourav
• [PATCHv2 2/2] Input: ads7846 - configure pendown gpio as input   Poddar, Sourav
• [PATCH v3 1/2] ads7846: fix gpio free without requesting   Sourav Poddar
• [PATCH v3 2/2] Input: ads7846: use gpio_request_one to configure pendown_gpio   Sourav Poddar
• [PATCH v3 2/2] Input: ads7846: use gpio_request_one to configure pendown_gpio   Poddar, Sourav
• [PATCH v3 2/2] Input: ads7846: use gpio_request_one to configure pendown_gpio   Poddar, Sourav
• [PATCH v3 2/2] Input: ads7846: use gpio_request_one to configure pendown_gpio   Poddar, Sourav
• [PATCH 0/5] Change omap DEBUG_LL code to use inituart for AUTO_ZRELADDR and ARM_PATCH_PHYS_VIRT   Poddar, Sourav
• [PATCH v5 0/5] omap: mailbox: hwmod support   Poddar, Sourav
• [RFC] ARM: Cortex-A9: Enable dynamic clock gating   Todd Poynor
• [PATCHv5] omap3: Add basic support for 720MHz part   Sanjeev Premi
• [PATCH 0/1] omap3: pm: CM_AUTOIDLE_PLL isn't restored on wakeup from off state   Sanjeev Premi
• [PATCH 1/1] omap3: Save and restore CM_AUTOIDLE_PLL across off mode   Sanjeev Premi
• [PATCH] omap3: fix compile-time warnings   Sanjeev Premi
• [PATCH 0/2] omap3: minor clean-up in flash related code   Sanjeev Premi
• [PATCH 1/2] omap3: fix minor typos   Sanjeev Premi
• [PATCH 2/2] omap3: flash: use pr_err instead of printk   Sanjeev Premi
• [patch-v2.6.39 5/7] AM35xx: hwmod data: Add USBOTG   Premi, Sanjeev
• [patch-v2.6.39 5/7] AM35xx: hwmod data: Add USBOTG   Premi, Sanjeev
• PATCH [1/1] V3 - Clock Support for VT8500/WM8505   Tony Prisk
• PATCH [1/1] V4 - Clock Support for VT8500/WM8505   Tony Prisk
• PATCH [1/1] V4 - Clock Support for VT8500/WM8505   Tony Prisk
• [PATCH] Kirkwood: initialize PCIE1 for QNAP TS-419P+   Zintis Pētersons
• [PATCH] omap: wd_timer: Fix crash frm wdt_probe when !CONFIG_RUNTIME_PM   Sricharan R
• [klibc] fwd: fix up ARM assembly to use 'bx lr' in place of 'mov pc, lr'.   Khem Raj
• [klibc] fwd: fix up ARM assembly to use 'bx lr' in place of 'mov pc, lr'.   Khem Raj
• ALSA issue on DA850/OMAP-L138/AM18x   Rajashekhara, Sudhakar
• [PATCH 12/12] arm: mach-mmp: brownstone.c support multiple sd slot=   Philip Rakity
• [PATCH 0/4] arm: mach-mmp: Allow correct PXA Selections   Philip Rakity
• [[PATCH 1/4] arm: mach-mmp: Fix Kconfig to allow correct PXA Selections   Philip Rakity
• [PATCH 2/4] arm: configs: update mmp2 defconfig for brownstone and SoC Selection   Philip Rakity
• [PATCH 3/4] arm: configs: update pxa168 defconfig for SoC Selection   Philip Rakity
• [PATCH 4/4] arm: configs: update pxa910 defconfig for SoC Selection   Philip Rakity
• [PATCH 0/5] arm: mach-mmp: mmp-pxa168-mmp2-multiple SD cards   Philip Rakity
• [PATCH 1/5] arm: mach-mmp: SDH register definitions for (pxa168, pxa910, mmp2)   Philip Rakity
• [PATCH 2/5] arm: mach-mmp: mmp2.c use revised APMU registers defines for APMU_CLK_OPS   Philip Rakity
• [PATCH 3/5] plat-pxa: sdhci.h define for PERMANENT SD/eMMC/SDIO cards   Philip Rakity
• [PATCH 4/5] mach-mmp: PXA168: support multiple SD controllers   Philip Rakity
• [PATCH 5/5] arm: mach-mmp: brownstone.c support multiple sd slots   Philip Rakity
• [PATCH 0/2] arm: mach-mmp/plat-pxa: define sd private clock registers and use them   Philip Rakity
• [PATCH 1/2] plat-pxa: Enable ability to adjust SD/MMC clocks   Philip Rakity
• [PATCH 2/2] mach-mmp: Support for SD/MMC clock adjustment in brownstone   Philip Rakity
• [PATCH 2/2] mach-mmp: Support for SD/MMC clock adjustment in brownstone   Philip Rakity
• [PATCH 2/4] arm: V2 configs: update mmp2 defconfig for brownstone and SoC Selection   Philip Rakity
• [PATCH 4/4] arm: V2 configs: update pxa910 defconfig for SoC Selection   Philip Rakity
• [PATCH 2/4] arm: V2 configs: update pxa168 defconfig for SoC Selection   Philip Rakity
• [PATCH V2] arm: mach-mmp: brownstone.c support multiple sd slots   Philip Rakity
• [PATCH v5 0/5] omap: mailbox: hwmod support   Ramirez Luna, Omar
• [PATCH v5 3/5] OMAP4: hwmod data: add mailbox data   Ramirez Luna, Omar
• [PATCH v5 3/5] OMAP4: hwmod data: add mailbox data   Ramirez Luna, Omar
• [PATCH v5 3/5] OMAP4: hwmod data: add mailbox data   Ramirez Luna, Omar
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   Ramirez Luna, Omar
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling   Ramirez Luna, Omar
• [PATCH 0/2] ARM: tegra: add TrimSlice support   Mike Rapoport
• [PATCH 1/2] ARM: update trimslice entry in the machine registry   Mike Rapoport
• [PATCH 2/2] ARM: tegra: add TrimSlice board   Mike Rapoport
• [PATCH 2/2] ARM: tegra: add TrimSlice board   Mike Rapoport
• [PATCH 2/2] ARM: tegra: add TrimSlice board   Mike Rapoport
• [PATCH 2/2] ARM: tegra: add TrimSlice board   Mike Rapoport
• [PATCH 4/6] ARM: tegra: harmony: register sdhci devices   Mike Rapoport
• [PATCH] ARM: reenable DEBUG_SECTION_MISMATCH   Sam Ravnborg
• TI DaVinci support under new maintainer: Sekhar Nori   Raffaele Recalcati
• [PATCH 1/5] mmc: sdhci-esdhc-imx: add support for write protect on custom GPIO   Marc Reilly
• mc13xxx-core, support for i2c, V4   Marc Reilly
• mc13xxx-core, support for i2c, V4   Marc Reilly
• [PATCH 1/2] ARM: imx35: fix ATA_DATA3 pad control address   Marc Reilly
• [PATCH 5/5] mmc: sdhci: add quirk SDHCI_QUIRK_FIX_NO_INT_IN_MULTI_BLK_IO   Zhu Richard-R65037
• [PATCH 5/5] mmc: sdhci: add quirk SDHCI_QUIRK_FIX_NO_INT_IN_MULTI_BLK_IO   Zhu Richard-R65037
• [PATCH 5/5] mmc: sdhci: add quirk SDHCI_QUIRK_FIX_NO_INT_IN_MULTI_BLK_IO   Zhu Richard-R65037
• [PATCH 5/5] mmc: sdhci: add quirk SDHCI_QUIRK_FIX_NO_INT_IN_MULTI_BLK_IO   Zhu Richard-R65037
• [PATCH v2 5/5] mmc: sdhci-esdhc: enable esdhc on imx53   Zhu Richard-R65037
• [PATCH v2 5/5] mmc: sdhci-esdhc: enable esdhc on imx53   Zhu Richard-R65037
• Recall: [PATCH v2 5/5] mmc: sdhci-esdhc: enable esdhc on imx53   Zhu Richard-R65037
• Recall: [PATCH v2 5/5] mmc: sdhci-esdhc: enable esdhc on imx53   Zhu Richard-R65037
• FW: [PATCH v2 5/5] mmc: sdhci-esdhc: enable esdhc on imx53   Zhu Richard-R65037
• [PATCH V3 1/4] ARM: imx53_loco: add esdhc device support   Zhu Richard-R65037
• [PATCH V3 3/4] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS   Zhu Richard-R65037
• [PATCH V3 4/4] mmc: sdhci-esdhc: enable esdhc on imx53   Zhu Richard-R65037
• Question about ARM function graph tracing   Steven Rostedt
• mc13xxx-core, support for i2c, V4   Philippe Rétornaz
• dma_declare_coherent_memory() again.   Philippe Rétornaz
• [PATCH 03/19] ab3550: mfd_cell is now implicitly available to drivers   Andres Salomon
• [PATCH 04/19] ab3100: mfd_cell is now implicitly available to drivers   Andres Salomon
• [PATCH 15/19] mc13xxx: mfd_cell is now implicitly available to drivers   Andres Salomon
• [PATCH 15/19] mc13xxx: mfd_cell is now implicitly available to drivers   Andres Salomon
• [PATCH 04/17] ab3550: mfd_cell is now implicitly available to drivers   Andres Salomon
• [PATCH 05/17] ab3100: mfd_cell is now implicitly available to drivers   Andres Salomon
• [PATCH 16/17] mc13xxx: mfd_cell is now implicitly available to drivers   Andres Salomon
• [PATCH 1/9] mfd-core: rename platform_data field of mfd_cell to mfd_data   Andres Salomon
• [PATCH 16/17] mc13xxx: mfd_cell is now implicitly available to drivers   Andres Salomon
• [PATCH 04/29] ab3550: mfd_cell is now implicitly available to drivers   Andres Salomon
• [PATCH 05/29] ab3100: mfd_cell is now implicitly available to drivers (v2)   Andres Salomon
• [PATCH 16/29] mc13xxx: mfd_cell is now implicitly available to drivers (v2)   Andres Salomon
• [PATCH 18/29] mfd-core: rename platform_data field of mfd_cell to mfd_data   Andres Salomon
• [PATCH 16/17] mc13xxx: mfd_cell is now implicitly available to drivers   Andres Salomon
• [PATCH] OMAP2/3/4: DSS2: Enable Display SubSystem as modules   Samreen
• [PATCH v6] OMAP2/3/4: DSS2: Enable Display SubSystem as modules   Samreen
• [PATCHv2 2/2] Input: ads7846 - configure pendown gpio as input   Wolfram Sang
• [PATCH v3 1/2] ads7846: fix gpio free without requesting   Wolfram Sang
• [PATCH v3 1/2] ads7846: fix gpio free without requesting   Wolfram Sang
• [PATCH v3 2/2] Input: ads7846: use gpio_request_one to configure pendown_gpio   Wolfram Sang
• [PATCH v3 2/2] Input: ads7846: use gpio_request_one to configure pendown_gpio   Wolfram Sang
• [PATCH v3 2/2] Input: ads7846: use gpio_request_one to configure pendown_gpio   Wolfram Sang
• [PATCH v3 2/2] Input: ads7846: use gpio_request_one to configure pendown_gpio   Wolfram Sang
• MMC quirks relating to performance/lifetime.   Wolfram Sang
• [PATCH 1/2] video: Add i.MX23/28 framebuffer driver   Wolfram Sang
• [PATCH 0/5] sdhci-esdhc-imx: use gpio for write protection and card detection   Wolfram Sang
• [PATCH 1/5] mmc: sdhci-esdhc-imx: add support for write protect on custom GPIO   Wolfram Sang
• [PATCH 2/5] mmc: sdhci-esdhc: broken card detection is not a default quirk   Wolfram Sang
• [PATCH 3/5] mmc: sdhci-esdhc-imx: add card detect on custom GPIO   Wolfram Sang
• [PATCH 4/5] arm: mach-mx3: pcm043: add write-protect and card-detect for SD1   Wolfram Sang
• [PATCH 5/5] arm: mach-mx3: use IMX_GPIO_NR instead of hard-coded values   Wolfram Sang
• [PATCH 2/5] mmc: sdhci-esdhc: broken card detection is not a default quirk   Wolfram Sang
• [PATCH 1/5] mmc: sdhci-esdhc-imx: add support for write protect on custom GPIO   Wolfram Sang
• [PATCH v2 7/7] ARM: mxs/mx28evk: add mmc device   Wolfram Sang
• [PATCH v2 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Wolfram Sang
• [PATCH v2 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Wolfram Sang
• [PATCH v2 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Wolfram Sang
• [PATCH v2 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Wolfram Sang
• [PATCH V2] i2c: add driver for Freescale i.MX28   Wolfram Sang
• [PATCH v2 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Wolfram Sang
• [PATCH v2 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Wolfram Sang
• [PATCH 0/2] mach-mxs: dynamic device creation for i.MX28-i2c   Wolfram Sang
• [PATCH 1/2] arm: mx23: names of interrupts and base address should match for I2C   Wolfram Sang
• [PATCH 2/2] arm: mxs: add i2c-devices   Wolfram Sang
• [PATCH 4/5] mm: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS   Wolfram Sang
• [PATCH 5/5] mmc: sdhci: add quirk SDHCI_QUIRK_FIX_NO_INT_IN_MULTI_BLK_IO   Wolfram Sang
• [PATCH 5/5] mmc: sdhci: add quirk SDHCI_QUIRK_FIX_NO_INT_IN_MULTI_BLK_IO   Wolfram Sang
• [PATCH 5/5] mmc: sdhci: add quirk SDHCI_QUIRK_FIX_NO_INT_IN_MULTI_BLK_IO   Wolfram Sang
• [PATCH v3] dmaengine: mxs-dma: add dma support for i.MX23/28   Wolfram Sang
• [PATCH v3 0/2] Add dma device for i.MX23/28   Wolfram Sang
• [PATCH v3] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Wolfram Sang
• [PATCH v3] Add mmc device for i.MX23/28   Wolfram Sang
• [PATCH v3 5/6] ARM: mxs/mx23evk: add mmc device   Wolfram Sang
• [PATCH v3] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Wolfram Sang
• [PATCH v4] ARM: mxs/mx23evk: add mmc device   Wolfram Sang
• [PATCH v4] ARM: mxs/mx28evk: add mmc device   Wolfram Sang
• [PATCH v2 5/5] mmc: sdhci-esdhc: enable esdhc on imx53   Wolfram Sang
• [PATCH v3] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Wolfram Sang
• [PATCH V2 0/5] sdhci-esdhc-imx: use gpio for write protection and card detection   Wolfram Sang
• [PATCH 1/5] mmc: sdhci-esdhc-imx: add support for write protect on custom GPIO   Wolfram Sang
• [PATCH 2/5] mmc: sdhci-esdhc: broken card detection is not a default quirk   Wolfram Sang
• [PATCH 3/5] mmc: sdhci-esdhc-imx: add card detect on custom GPIO   Wolfram Sang
• [PATCH 4/5] arm: mach-mx3: pcm043: add write-protect and card-detect for SD1   Wolfram Sang
• [PATCH 5/5] arm: mach-mx3: use IMX_GPIO_NR instead of hard-coded values   Wolfram Sang
• [PATCH V2 0/5] sdhci-esdhc-imx: use gpio for write protection and card detection   Wolfram Sang
• [PATCH v2 5/5] mmc: sdhci-esdhc: enable esdhc on imx53   Wolfram Sang
• [PATCH v3] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Wolfram Sang
• [PATCH 4/5] arm: mach-mx3: pcm043: add write-protect and card-detect for SD1   Wolfram Sang
• [PATCH 5/5] arm: mach-mx3: use IMX_GPIO_NR instead of hard-coded values   Wolfram Sang
• [PATCH V3 0/5] sdhci-esdhc-imx: use gpio for write protection and card detection   Wolfram Sang
• [PATCH 1/5] mmc: sdhci-esdhc-imx: add support for write protect on custom GPIO   Wolfram Sang
• [PATCH 2/5] mmc: sdhci-esdhc: broken card detection is not a default quirk   Wolfram Sang
• [PATCH 3/5] mmc: sdhci-esdhc-imx: add card detect on custom GPIO   Wolfram Sang
• [PATCH 4/5] arm: mach-mx3: pcm043: add write-protect and card-detect for SD1   Wolfram Sang
• [PATCH 5/5] arm: mach-mx3: use IMX_GPIO_NR instead of hard-coded values   Wolfram Sang
• [PATCH V3 0/5] sdhci-esdhc-imx: use gpio for write protection and card detection   Wolfram Sang
• [PATCH V3 0/5] sdhci-esdhc-imx: use gpio for write protection and card detection   Wolfram Sang
• [PATCH v4] dmaengine: mxs-dma: add dma support for i.MX23/28   Wolfram Sang
• [PATCH 1/2] eukrea_mbimxsd25-baseboard: add SD card detect   Wolfram Sang
• [PATCH v2 5/5] mmc: sdhci-esdhc: enable esdhc on imx53   Wolfram Sang
• [PATCH V4 0/3] adding write_protect and card_detect for mx25/35   Wolfram Sang
• [PATCH 1/3] mmc: sdhci-esdhc-imx: add support for write protect on custom GPIO on mx25/35   Wolfram Sang
• [PATCH 2/3] mmc: sdhci-esdhc: broken card detection is not a default quirk   Wolfram Sang
• [PATCH 3/3] mmc: sdhci-esdhc-imx: add card detect on custom GPIO for mx25/35   Wolfram Sang
• [PATCH] ARM: mach-imx: mx25_3ds: add write-protect and card-detect for SD   Wolfram Sang
• [PATCH 1/2] eukrea_mbimxsd25-baseboard: add SD card detect   Wolfram Sang
• [PATCH V3 1/4] ARM: imx53_loco: add esdhc device support   Wolfram Sang
• [PATCH V3 1/4] ARM: imx53_loco: add esdhc device support   Wolfram Sang
• [PATCH V3 3/4] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS   Wolfram Sang
• [PATCH V3 4/4] mmc: sdhci-esdhc: enable esdhc on imx53   Wolfram Sang
• [PATCH 0/2] mach-mxs: dynamic device creation for i.MX28-i2c   Wolfram Sang
• [PATCH 1/2] arm: mxs: add i2c-devices for mx28   Wolfram Sang
• [PATCH 2/2] arm: mxs: tx28: add i2c bus and connected RTC   Wolfram Sang
• [PATCH v2 2/6] arm/dt: Allow CONFIG_OF on ARM   Hendrik Sattler
• DreamPlug   JK Scheinberg
• [PATCH] Clean up set_pxa_fb_info   Stefan Schmidt
• [PATCH]ARM: mmp: add Trizeps6 board support   Yupeng Schneider
• ARM: mmp: add Trizeps6 board support   Yupeng Schneider
• ARM: mmp: add Trizeps6 board support   Yupeng Schneider
• [PATCH]ARM: mmp: add Trizeps6 board support   Yupeng Schneider
• [PATCH]ARM: mmp: add Trizeps6 board support   Yupeng Schneider
• [PATCH] i.MX23/28 framebuffer driver   Robert Schwebel
• [PATCH v10 18/18] OMAP2, 3: DSS2: Get DSS IRQ from platform device   Semwal, Sumit
• [PATCH 4/8] OMAP4: hwmod data: Add DSS, DISPC, DSI1&2, RFBI, HDMI and VENC   Semwal, Sumit
• [PATCH 4/8] OMAP4: hwmod data: Add DSS, DISPC, DSI1&2, RFBI, HDMI and VENC   Semwal, Sumit
• [PATCH v10 05/18] OMAP2, 3 DSS2 Change driver name to omap_display   Semwal, Sumit
• [PATCH 2/2] ARM: iMX5 BBG: add cpuidle driver parameters   Yong Shen
• [PATCH 2/2] ARM: iMX5 BBG: add cpuidle driver parameters   Yong Shen
• [PATCH 2/2] ARM: iMX5 BBG: add cpuidle driver parameters   Yong Shen
• [PATCH v2 1/2] ARM: IMX5: cpuidle driver   Yong Shen
• [PATCH v2 1/2] ARM: IMX5: cpuidle driver   Yong Shen
• [PATCH v2 1/2] ARM: IMX5: cpuidle driver   Yong Shen
• [PATCH v2 1/2] ARM: IMX5: cpuidle driver   Yong Shen
• [PATCH v2 1/2] ARM: IMX5: cpuidle driver   Yong Shen
• [PATCH v3 1/2] ARM: IMX5: cpuidle driver   Yong Shen
• [PATCH 1/6] omap4: powerdomain: Add supported INACTIVE power state   Santosh Shilimkar
• linux-next-20100201 - OMAP2+ defconfig broken with CONFIG_DEBUG_LL   Santosh Shilimkar
• [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)   Santosh Shilimkar
• [PATCH 3/6] omap4: powerdomain: Use intended PWRSTS_* flags instead of values   Santosh Shilimkar
• [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)   Santosh Shilimkar
• [PATCH 1/6] omap4: powerdomain: Add supported INACTIVE power state   Santosh Shilimkar
• [PATCH 1/6] omap4: powerdomain: Add supported INACTIVE power state   Santosh Shilimkar
• [PATCH v2 3/5] ARM: omap3: Remove hand-encoded SMC instructions   Santosh Shilimkar
• [PATCH v2 1/5] ARM: omap4: Correct definition of do_wfi() for CONFIG_THUMB2_KERNEL   Santosh Shilimkar
• [PATCH v2 4/5] ARM: omap3: Thumb-2 compatibility for sram34xx.S   Santosh Shilimkar
• [PATCH v2 5/5] ARM: omap3: Thumb-2 compatibility for sleep34xx.S   Santosh Shilimkar
• [PATCH v2 1/5] ARM: omap4: Correct definition of do_wfi() forCONFIG_THUMB2_KERNEL   Santosh Shilimkar
• [PATCH v2 0/9] omap4: prcm: Few dpll, clockdomain and powerdomain updates   Santosh Shilimkar
• [PATCH v2 1/9] omap4: powerdomain: Add supported INACTIVE power state   Santosh Shilimkar
• [PATCH v2 2/9] omap4: prcm: Fix the CPUx clockdomain offsets   Santosh Shilimkar
• [PATCH v2 3/9] omap4: powerdomain: Use intended PWRSTS_* flags instead of values   Santosh Shilimkar
• [PATCH v2 4/9] omap: clocks: Add checks to see if enable/disable ops are supported   Santosh Shilimkar
• [PATCH v2 5/9] omap: clocks: Add allow_idle/deny_idle support in clkops   Santosh Shilimkar
• [PATCH v2 6/9] omap: dpll: Add allow_idle/deny_idle support for all DPLL's   Santosh Shilimkar
• [PATCH v2 7/9] omap4: dpll: Add dpll api to control GATE_CTRL   Santosh Shilimkar
• [PATCH v2 8/9] omap4: dpll: Enable auto gate control for all MX postdividers   Santosh Shilimkar
• [PATCH v2 9/9] omap4: clockdomain: Fix the CPUx domain name   Santosh Shilimkar
• [PATCH 0/5] ARM: Few patches for PM enablement.   Santosh Shilimkar
• [PATCH v2 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Santosh Shilimkar
• [PATCH 4/5] ARM: scu: Move register defines to header file   Santosh Shilimkar
• [PATCH 1/2] ARM: Thumb-2: Make CONFIG_THUMB2_KERNEL depend on !CPU_V6   Santosh Shilimkar
• [PATCH 2/2] ARM: Make CONFIG_FPE_NWFPE depend on !CONFIG_THUMB2_KERNEL   Santosh Shilimkar
• [PATCH v2 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Santosh Shilimkar
• [PATCH v2 1/5] ARM: omap4: Correct definition of do_wfi() forCONFIG_THUMB2_KERNEL   Santosh Shilimkar
• [PATCH 4/5] ARM: scu: Move register defines to header file   Santosh Shilimkar
• [PATCH v3 3/5] ARM: omap3: Remove hand-encoded SMC instructions   Santosh Shilimkar
• [PATCH v2 04/28] ARM: mm: cache-l2x0: Add support for re-enabling l2x0   Santosh Shilimkar
• [PATCH v2 04/28] ARM: mm: cache-l2x0: Add support forre-enabling l2x0   Santosh Shilimkar
• [PATCH v2 04/28] ARM: mm: cache-l2x0: Add support forre-enabling l2x0   Santosh Shilimkar
• [PATCH v2 1/9] omap4: powerdomain: Add supported INACTIVE power state   Santosh Shilimkar
• [PATCH 4/5] ARM: scu: Move register defines to header file   Santosh Shilimkar
• [PATCH 4/5] ARM: scu: Move register defines to header file   Santosh Shilimkar
• [PATCH 4/5] ARM: scu: Move register defines to header file   Santosh Shilimkar
• [PATCH v2 3/9] omap4: powerdomain: Use intended PWRSTS_* flags instead of values   Santosh Shilimkar
• [PATCH v2 1/9] omap4: powerdomain: Add supported INACTIVE power state   Santosh Shilimkar
• [PATCH] ARM: Define wfi(), wfe(), sev() macros for pre-v7 processors   Santosh Shilimkar
• [PATCH] ARM: Define wfi(), wfe(), sev() macros for pre-v7 processors   Santosh Shilimkar
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Santosh Shilimkar
• [PATCH v2] ARM: Define wfi() macro for v6 processors   Santosh Shilimkar
• [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels   Santosh Shilimkar
• [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels   Santosh Shilimkar
• [PATCH v2 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Santosh Shilimkar
• [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels   Santosh Shilimkar
• [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels   Santosh Shilimkar
• [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels   Santosh Shilimkar
• [PATCH 4/5] ARM: scu: Move register defines to header file   Santosh Shilimkar
• [PATCH 4/5] ARM: scu: Move register defines to header file   Santosh Shilimkar
• [PATCH v3 2/5] ARM: pm: add generic CPU suspend/resume support   Santosh Shilimkar
• reboot not working on linux-2.6.37 for ARMv7   Santosh Shilimkar
• reboot not working on linux-2.6.37 for ARMv7   Santosh Shilimkar
• [PATCH 0/5] ARM: Few patches for PM enablement.   Santosh Shilimkar
• [PATCH] omap3: pm: Use exported set_cr() instead of a custom one.   Santosh Shilimkar
• [PATCH] omap3: cpuidle: Add description field to each C-state.   Santosh Shilimkar
• [PATCH] omap3: cpuidle: Add description field to each C-state.   Santosh Shilimkar
• [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)   Santosh Shilimkar
• [RFC PATCH 0/3] CPU PM notifiers   Santosh Shilimkar
• [PATCH 0/5] ARM: omap4 related fixes for 2.6.39   Santosh Shilimkar
• [PATCH 1/5] ARM: smp: Select local timers vs dummy timer support runtime   Santosh Shilimkar
• [PATCH 2/5] omap4: Enable ARM local timers with OMAP4430 es1.0 exception   Santosh Shilimkar
• [PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption   Santosh Shilimkar
• [PATCH 4/5] omap2plus: omap4: Set NR_CPU to 2 instead of default 4   Santosh Shilimkar
• [PATCH 5/5] omap4: Remove 'FIXME: omap44xx_sram_init not implemented'   Santosh Shilimkar
• [PATCH v3 2/5] ARM: pm: add generic CPU suspend/resume support   Santosh Shilimkar
• [PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption   Santosh Shilimkar
• [PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption   Santosh Shilimkar
• [PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption   Santosh Shilimkar
• [PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption   Santosh Shilimkar
• [PATCHv2] omap2/3: dmtimer: Enable autoidle   Santosh Shilimkar
• [PATCHv2] omap2/3: dmtimer: Enable autoidle   Santosh Shilimkar
• [PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption   Santosh Shilimkar
• [PATCH 1/5] ARM: smp: Select local timers vs dummy timer support runtime   Santosh Shilimkar
• [PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption   Santosh Shilimkar
• [PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption   Santosh Shilimkar
• [PATCH 0/2] l2x0: Add PL310 Errata 727915   Santosh Shilimkar
• [PATCH 1/2] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption   Santosh Shilimkar
• [PATCH 2/2] omap4: l2x0: Populate set_debug() function and enable Errata 727915   Santosh Shilimkar
• [PATCH 2/5] omap4: Enable ARM local timers with OMAP4430 es1.0 exception   Santosh Shilimkar
• [PATCH] perf: add OMAP support for the new power events   Santosh Shilimkar
• [PATCH] ARM: gic: use handle_fasteoi_irq for SPIs   Santosh Shilimkar
• [PATCH 00/17] omap4: pm: suspend, hotplug and cpuilde support   Santosh Shilimkar
• [PATCH 01/17] omap4: pm: Add omap WakeupGen module support   Santosh Shilimkar
• [PATCH 02/17] omap4: pm: Add SAR RAM support   Santosh Shilimkar
• [PATCH 03/17] omap4: Export scu base address   Santosh Shilimkar
• [PATCH 04/17] omap4: pm: Add CPUx OFF mode support   Santosh Shilimkar
• [PATCH 05/17] omap4: pm: Initialise all the clockdomains to supported states   Santosh Shilimkar
• [PATCH 06/17] omap4: pm: Program CPU1 to hit OFF when off-lined   Santosh Shilimkar
• [PATCH 07/17] omap4: pm: CPU1 wakeup workaround form Low power modes   Santosh Shilimkar
• [PATCH 08/17] omap4: pm: Add GIC save/restore support   Santosh Shilimkar
• [PATCH 09/17] omap4: pm: Add WakeupGen save/restore support   Santosh Shilimkar
• [PATCH 10/17] omap4: pm: Add L2 cache lowpower support   Santosh Shilimkar
• [PATCH 11/17] omap4: suspend: Add MPUSS RET and OFF support   Santosh Shilimkar
• [PATCH 12/17] omap4: pm-debug: Add wakeup timer and debug counters   Santosh Shilimkar
• [PATCH 13/17] omap4: cpuidle: Basic CPUidle support   Santosh Shilimkar
• [PATCH 14/17] omap4: cpuidle: Add MPUSS RET OFF states   Santosh Shilimkar
• [PATCH 15/17] omap4: cpuidle: Switch to gptimer from twd in deeper C-states.   Santosh Shilimkar
• [PATCH 16/17] omap4: cpuidle: Allow debugfs control through enable_off_mode   Santosh Shilimkar
• [PATCH 17/17] omap4: Remove un-used do_wfi() macro.   Santosh Shilimkar
• [PATCH] perf: add OMAP support for the new power events   Santosh Shilimkar
• [PATCH 1/5] ARM: smp: Select local timers vs dummy timersupport runtime   Santosh Shilimkar
• [PATCH] perf: add OMAP support for the new power events   Santosh Shilimkar
• [PATCH 14/17] omap4: cpuidle: Add MPUSS RET OFF states   Santosh Shilimkar
• [PATCH 0/6] omap3: pm: Fixes for low power code   Santosh Shilimkar
• [PATCH 1/6] omap3: pm: Use amrv7 supported instructions instead of legacy cp15 ones   Santosh Shilimkar
• [PATCH 2/6] omap3: pm: Fix the mmu on sequence in the asm code   Santosh Shilimkar
• [PATCH 3/6] omap3: pm: Allow the cache clean when L1 is lost.   Santosh Shilimkar
• [PATCH 4/6] omap3: pm: Remove un-necessary cp15 registers form low power cpu context   Santosh Shilimkar
• [PATCH 5/6] omap3: pm: Clear the SCTLR C bit in asm code to prevent data cache allocation   Santosh Shilimkar
• [PATCH 6/6] omap3: pm: Use exported set_cr() instead of a custom one.   Santosh Shilimkar
• [PATCH 14/17] omap4: cpuidle: Add MPUSS RET OFF states   Santosh Shilimkar
• OMAP4: IRQ line of CortexA9 performance monitor   Santosh Shilimkar
• [PATCH 2/5] ARM: omap: update GPIO chained IRQ handler to use EOI in parent chip   Santosh Shilimkar
• [PATCH 2/5] ARM: omap: update GPIO chained IRQ handler to use EOI in parent chip   Santosh Shilimkar
• [PATCH 8/8] OMAP2+: clockevent: late-init GPTIMER clockevent hwmodright before timer init   Santosh Shilimkar
• [PATCH 1/5] ARM: smp: Select local timers vs dummytimersupport runtime   Santosh Shilimkar
• [PATCH 1/5] ARM: smp: Select local timers vs dummytimersupport runtime   Santosh Shilimkar
• [PATCH 1/5] ARM: smp: Select local timers vs dummytimersupportruntime   Santosh Shilimkar
• [PATCH 1/5] ARM: smp: Select local timers vsdummytimersupportruntime   Santosh Shilimkar
• [PATCH 8/8] OMAP2+: clockevent: late-init GPTIMER clockevent hwmodright before timer init   Santosh Shilimkar
• [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)   Santosh Shilimkar
• [PATCH 1/2] ARM: l2x0: Errata fix for flush by Way operationcan cause data corruption   Santosh Shilimkar
• [PATCH] ARM: 6770/1: l2x0: Errata fix for flush by Way operation   Santosh Shilimkar
• [PATCH 1/2] ARM: l2x0: Errata fix for flush by Way operationcan cause data corruption   Santosh Shilimkar
• [PATCH v3 2/5] ARM: pm: add generic CPU suspend/resume support   Santosh Shilimkar
• [PATCH 4/8] ARM: etm: Allow range selection   Alexander Shishkin
• [PATCH 1/4] davinci: da8xx/omap-l1: add support for SPI   Sergei Shtylyov
• [PATCH 3/4] davinci: add spi devices support for da850/omap-l138/am18x evm   Sergei Shtylyov
• [PATCH 4/4] davinci: add spi devices support for da830/omap-l137/am17x evm   Sergei Shtylyov
• [PATCH v1 2/9] da850: pruss board specific additions.   Sergei Shtylyov
• [PATCH v1 3/9] da850: pruss platform specific additions.   Sergei Shtylyov
• [PATCH v1 5/9] da850: pruss CAN board specific additions.   Sergei Shtylyov
• [PATCH v1 6/9] da850: pruss CAN platform specific additions.   Sergei Shtylyov
• [PATCH v1 7/9] mfd: pruss CAN private data.   Sergei Shtylyov
• [PATCH v1 8/9] da850: pruss CAN board specific changes for gpios.   Sergei Shtylyov
• [PATCH v1 9/9] da850: pruss CAN platform specific changes for gpios.   Sergei Shtylyov
• [PATCH v1 1/4] davinci: da8xx/omap-l1: add support for SPI   Sergei Shtylyov
• [PATCH v1 1/4] davinci: da8xx/omap-l1: add support for SPI   Sergei Shtylyov
• [PATCH v1 1/4] davinci: da8xx/omap-l1: add support for SPI   Sergei Shtylyov
• [PATCH v1 1/4] davinci: da8xx/omap-l1: add support for SPI   Sergei Shtylyov
• [PATCH v1 1/4] davinci: da8xx/omap-l1: add support for SPI   Sergei Shtylyov
• [PATCH 1/3] davinci: spi: move event_q parameter to platform data   Sergei Shtylyov
• [PATCH v2 2/3] Kirkwood: enable PCIe before reading device ID register   Sergei Shtylyov
• [PATCH] arm: mach-omap2: board-rm680: fix rm680_vemmc regulator constraints   Sergei Shtylyov
• [PATCH] DA850 EVM: kill useless variable   Sergei Shtylyov
• [PATCH 6/9] plat-nomadik: type secondary IRQ correctly   Sergei Shtylyov
• [PATCH 1/2] atmel/macb: fix device name when SOFT/HARD_IRQ enabled   Sergei Shtylyov
• [PATCH] ARM: imx/eukrea_mbimx27: fix compile warnings about unused variables   Sergei Shtylyov
• [PATCH] ARM: Add writethrough dcache support for ARM926EJS processor   Sergei Shtylyov
• [PATCH] DaVinci: fix compilation warnings in <mach/clkdev.h>   Sergei Shtylyov
• [PATCH] ARM: imx/eukrea_mbimx27: fix compile warnings about unused variables   Sergei Shtylyov
• [PATCH 1/2] atmel/macb: fix device name when SOFT/HARD_IRQ enabled   Sergei Shtylyov
• [PATCH] arm: update gitignore file   Sergei Shtylyov
• [PATCH v2 02/13] da850: pruss platform specific additions.   Sergei Shtylyov
• [PATCH v2 03/13] da850: pruss board specific additions.   Sergei Shtylyov
• [PATCH v2 06/13] da850: pruss CAN board specific additions.   Sergei Shtylyov
• [PATCH v2 07/13] da850: pruss CAN platform specific changes for gpios.   Sergei Shtylyov
• [PATCH v2 11/13] da850: pruss SUART board specific additions.   Sergei Shtylyov
• [PATCH v2 12/13] da850: pruss SUART platform specific additions.   Sergei Shtylyov
• [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()   Sergei Shtylyov
• [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()   Sergei Shtylyov
• [PATCH 4/4] arm: V2 configs: update pxa910 defconfig for SoC Selection   Sergei Shtylyov
• [PATCH 1/3] OMAP2+: hwmod: Avoid setup if clock lookup failed   Sergei Shtylyov
• [PATCH] DaVinci: fix compilation warnings in <mach/clkdev.h>   Sergei Shtylyov
• [PATCH 2/2] DM9000B: Fix PHY power for network down/up   Sergei Shtylyov
• [PATCH 2/2] Defines DA850/AM18xx/OMAPL1-38 SOC resources used by PRUSS UIO driver   Sergei Shtylyov
• [PATCH 1/2] PRUSS UIO driver support   Sergei Shtylyov
• [PATCH v2 12/13] da850: pruss SUART platform specific additions.   Sergei Shtylyov
• [PATCH 2/2] DM9000B: Fix PHY power for network down/up   Sergei Shtylyov
• [PATCH 1/6] ARM: tegra: add tegra_gpio_table and tegra_gpio_config   Sergei Shtylyov
• [PATCH] ARM: Fix compile after delay page freeing patch   Sergei Shtylyov
• [PATCH v3 1/2] PRUSS UIO driver support   Sergei Shtylyov
• [PATCH v4 6/7] arm/dt: Basic tegra devicetree support   Sergei Shtylyov
• [PATCH v2] ARM: Thumb-2: Reflect ARM/Thumb-2 configuration in module vermagic   Sergei Shtylyov
• [PATCH 4/4] msm: scm: Get cacheline size from CTR   Sergei Shtylyov
• [PATCH v4 2/2] Defines DA850/AM18xx/OMAPL1-38 SOC resources used by PRUSS UIO driver   Sergei Shtylyov
• [PATCH] davinci: da850/omap-l138: Add Carrier Link OK check in Davinci RX Handler   Sergei Shtylyov
• [PATCH v4 2/2] Defines DA850/AM18xx/OMAPL1-38 SOC resources used by PRUSS UIO driver   Sergei Shtylyov
• [PATCH v4 6/7] arm/dt: Basic tegra devicetree support   Sergei Shtylyov
• [PATCH v2] ARM: Thumb-2: Reflect ARM/Thumb-2 configuration in module vermagic   Sergei Shtylyov
• [PATCH] OMAP2+: sdrc: fix compile break on OMAP4-only config on current omap-for-linus   Sergei Shtylyov
• [PATCH v4 2/2] Defines DA850/AM18xx/OMAPL1-38 SOC resources used by PRUSS UIO driver   Sergei Shtylyov
• [PATCH] OMAP2+: sdrc: fix compile break on OMAP4-only config on current omap-for-linus   Sergei Shtylyov
• [PATCH 6/8 resend] dw_dmac: Mark all tx_descriptors with DMA_CRTL_ACK after xfer finish   Sergei Shtylyov
• [klibc] fwd: fix up ARM assembly to use 'bx lr' in place of 'mov pc, lr'.   Kirill A. Shutemov
• [klibc] fwd: fix up ARM assembly to use 'bx lr' in place of 'mov pc, lr'.   Kirill A. Shutemov
• [klibc] fwd: fix up ARM assembly to use 'bx lr' in place of 'mov pc, lr'.   Kirill A. Shutemov
• [PATCH 1/1] ARM: imx53: correct Silicon Revision definition following fuse map   Baruch Siach
• [PATCH 3/6] i2c/pxa2xx: Add PCI support for PXA I2C controller   Sebastian Andrzej Siewior
• I2C support for CE4100, v3   Sebastian Andrzej Siewior
• [PATCH 1/6] i2c-pxa2xx: use dynamic register layout   Sebastian Andrzej Siewior
• [PATCH 2/6] ARM: pxa2xx: reorganize I2C files   Sebastian Andrzej Siewior
• [PATCH 3/6] i2c-pxa2xx: Add PCI support for PXA I2C controller   Sebastian Andrzej Siewior
• [PATCH 4/6] i2c-pxa2xx: add support for shared IRQ handler   Sebastian Andrzej Siewior
• [PATCH 5/6] i2c-pxa2xx: check timeout correctly   Sebastian Andrzej Siewior
• [PATCH 6/6] i2c-pxa2xx: pass of_node from platform driver to adapter and publish   Sebastian Andrzej Siewior
• [PATCH] i.MX23/28 framebuffer driver   James Simmons
• bug in arm_kprobe_decode_insn   Marcin Slusarz
• [RFC] Inter-processor Mailboxes Drivers   Ira W. Snyder
• [PATCH 2/4] msm: iommu: Rework clock logic and add IOMMU bus clock control   Trilok Soni
• [PATCH 2/4] msm: iommu: Rework clock logic and add IOMMU bus clock control   Trilok Soni
• [PATCH] arm: mach-omap2: smartreflex: fix another memory leak   Vishwanath Sripathy
• [PATCHv2] arm: mach-omap2: smartreflex: fix another memory leak   Vishwanath Sripathy
• [PATCH 2/2] ARM: iMX5 BBG: add cpuidle driver parameters   Vishwanath Sripathy
• [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL   Vishwanath Sripathy
• [PATCH] mx3fb: Fix parameter to sdc_init_panel   Alexander Stein
• [PATCH] mx3fb: Fix parameter to sdc_init_panel   Alexander Stein
• [PATCH] mx3fb: Fix parameter to sdc_init_panel   Alexander Stein
• [PATCH] mx3fb: Fix parameter to sdc_init_panel   Alexander Stein
• Machine ID question   Alexander Stein
• Machine ID question   Alexander Stein
• [PATCH] PM: Allow pm_runtime_suspend() to succeed during system suspend   Alan Stern
• platform/i2c busses: pm runtime and system sleep   Alan Stern
• [PATCH v2 13/13] tty: pruss SUART driver   Subhasish
• [RFC] Inter-processor Mailboxes Drivers   Sundar
• [PATCH] EDB93xx: Add support for CS4271 CODEC on EDB93xx boards   Alexander Sverdlin
• [PATCH] EDB93xx: Add support for CS4271 CODEC on EDB93xx boards   Alexander Sverdlin
• [PATCH] EDB93xx: Add support for CS4271 CODEC on EDB93xx boards   Alexander Sverdlin
• [PATCH] EDB93xx: Add support for CS4271 CODEC on EDB93xx boards   Alexander Sverdlin
• [PATCH] EDB93xx: Add support for CS4271 CODEC on EDB93xx boards   Alexander Sverdlin
• [PATCH] ASoC: CS4271: Move Chip Select control out of the CODEC code.   Alexander Sverdlin
• [PATCH] EDB93xx: Add support for CS4271 SPI-connected CODEC   Alexander Sverdlin
• [PATCH] EDB93xx: Add support for CS4271 SPI-connected CODEC   Alexander Sverdlin
• [PATCH] EDB93xx: Add support for CS4271 SPI-connected CODEC   Alexander Sverdlin
• [PATCH] EDB93xx: Add support for CS4271 CODEC on EDB93xx boards   H Hartley Sweeten
• Unable to ioremap a SZ_64M region   H Hartley Sweeten
• [alsa-devel] [PATCH] EDB93xx: Add support for CS4271 CODEC on EDB93xx boards   H Hartley Sweeten
• [PATCH] EDB93xx: Add support for CS4271 CODEC on EDB93xx boards   H Hartley Sweeten
• [PATCH] EDB93xx: Add support for CS4271 CODEC on EDB93xx boards   H Hartley Sweeten
• [PATCH] EDB93xx: Add support for CS4271 CODEC on EDB93xx boards   H Hartley Sweeten
• [PATCH] EDB93xx: Add support for CS4271 CODEC on EDB93xx boards   H Hartley Sweeten
• [PATCH] EDB93xx: Add support for CS4271 CODEC on EDB93xx boards   H Hartley Sweeten
• [PATCH] ASoC: CS4271: Move Chip Select control out of the CODEC code.   H Hartley Sweeten
• [PATCH] ep93xx: fix build error in edb93xx framebuffer support   H Hartley Sweeten
• [PATCH] EDB93xx: Add support for CS4271 SPI-connected CODEC   H Hartley Sweeten
• [PATCH] ep93xx: fix build error in edb93xx framebuffer support   H Hartley Sweeten
• [PATCH] ep93xx: fix build error in edb93xx framebuffer support   H Hartley Sweeten
• [PATCH] ep93xx: correct the end address of the AC97 memory resource   H Hartley Sweeten
• [PATCH] EDB93xx: Add support for CS4271 SPI-connected CODEC   H Hartley Sweeten
• [RFC] MMC: error handling improvements   Brian Swetland
• [RFC] MMC: error handling improvements   Brian Swetland
• [PATCH v2 2/2] msm: add single-wire serial bus interface (SSBI) driver   Brian Swetland
• [PATCH for 2.6.38] ARM: S5PC110: update max8998_platform_data   Marek Szyprowski
• [PATCH for 2.6.38] ARM: S5PC110: fix regulator names   Marek Szyprowski
• [PATCH] Another small regulators update for Goni board   Marek Szyprowski
• [PATCH 1/2] ARM: S5PC110: disable unused power regulators on Goni board   Marek Szyprowski
• [PATCH 2/2] ARM: S5PC110: add power consumers for hsotg for Goni board   Marek Szyprowski
• [PATCH] ARM: Samsung: change suspend/resume code to depend on CONFIG_SUSPEND   Marek Szyprowski
• [PATCH] ARM: S5PC210: add support for i2c PMICs on Universal_C210 board   Marek Szyprowski
• [PATCH v2] ARM: S5PC210: add support for i2c PMICs on Universal_C210 board   Marek Szyprowski
• [PATCH 0/5] S5PC210/S5PV310/EXYNOS4 interrupts update   Marek Szyprowski
• [PATCH 1/5] ARM: S5PV310: Add missing GPYx banks.   Marek Szyprowski
• [PATCH 2/5] ARM: Samsung: cleanup S5P gpio interrupt code   Marek Szyprowski
• [PATCH 3/5] ARM: Samsung: add function to register gpio interrupt bank data   Marek Szyprowski
• [PATCH 4/5] ARM: S5PC210: add support for gpio interrupts   Marek Szyprowski
• [PATCH 5/5] ARM: S5PC210: add a placeholder for board specific interrupts   Marek Szyprowski
• [PATCH 2/4] V4L: mx3_camera: convert to videobuf2   Marek Szyprowski
• [PATCH 2/5] ARM: Samsung: cleanup S5P gpio interrupt code   Marek Szyprowski
• [PATCH 1/2] PRUSS UIO driver support   TK, Pratheesh Gangadhar
• [PATCH 1/2] PRUSS UIO driver support   TK, Pratheesh Gangadhar
• [PATCH 1/2] PRUSS UIO driver support   TK, Pratheesh Gangadhar
• [PATCH 1/2] PRUSS UIO driver support   TK, Pratheesh Gangadhar
• [PATCH 1/2] PRUSS UIO driver support   TK, Pratheesh Gangadhar
• [PATCH 1/2] PRUSS UIO driver support   TK, Pratheesh Gangadhar
• [PATCH 2/2] Defines DA850/AM18xx/OMAPL1-38 SOC resources used by PRUSS UIO driver   TK, Pratheesh Gangadhar
• [PATCH v2 1/2] PRUSS UIO driver support   TK, Pratheesh Gangadhar
• [PATCH v2 1/2] PRUSS UIO driver support   TK, Pratheesh Gangadhar
• [PATCH 1/2] PRUSS UIO driver support   TK, Pratheesh Gangadhar
• [PATCH v3 1/2] PRUSS UIO driver support   TK, Pratheesh Gangadhar
• [PATCH v3 1/2] PRUSS UIO driver support   TK, Pratheesh Gangadhar
• [PATCH v3 1/2] PRUSS UIO driver support   TK, Pratheesh Gangadhar
• [PATCH v5 1/2] PRUSS UIO driver support   TK, Pratheesh Gangadhar
• [PATCH v4 2/2] Defines DA850/AM18xx/OMAPL1-38 SOC resources used by PRUSS UIO driver   TK, Pratheesh Gangadhar
• [PATCH v2 02/13] da850: pruss platform specific additions.   TK, Pratheesh Gangadhar
• [PATCH v6 1/1] PRUSS UIO driver support   TK, Pratheesh Gangadhar
• ARM unaligned MMIO access with attribute((packed))   Ian Lance Taylor
• [PATCH v3 2/2] Input: ads7846: use gpio_request_one to configure pendown_gpio   Dmitry Torokhov
• [PATCH v3 2/2] Input: ads7846: use gpio_request_one to configure pendown_gpio   Dmitry Torokhov
• [PATCH v3 2/2] Input: ads7846: use gpio_request_one to configure pendown_gpio   Dmitry Torokhov
• [PATCH] MAINTAINERS: Update MSM maintainers   Linus Torvalds
• [PATCH] MAINTAINERS: Update MSM maintainers   Linus Torvalds
• [PATCH] omap:mailbox: resolve hang issue   Armando Uribe
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Eduardo Valentin
• [PATCH v10 18/18] OMAP2,3: DSS2: Get DSS IRQ from platform device   Tomi Valkeinen
• [PATCH] OMAP2/3/4: DSS2: Enable Display SubSystem as modules   Tomi Valkeinen
• [PATCH v6] OMAP2/3/4: DSS2: Enable Display SubSystem as modules   Tomi Valkeinen
• [PATCH v10 05/18] OMAP2,3 DSS2 Change driver name to omap_display   Tomi Valkeinen
• [PATCH v10 05/18] OMAP2,3 DSS2 Change driver name to omap_display   Tomi Valkeinen
• [PATCH v10 05/18] OMAP2,3 DSS2 Change driver name to omap_display   Tomi Valkeinen
• [PATCH v10 05/18] OMAP2,3 DSS2 Change driver name to omap_display   Tomi Valkeinen
• [PATCH v10 05/18] OMAP2,3 DSS2 Change driver name to omap_display   Tomi Valkeinen
• [PATCH v10 05/18] OMAP2,3 DSS2 Change driver name to omap_display   Tomi Valkeinen
• [PATCH resend] omap: Fix linker error in drivers/video/omap/lcd_2430sdp.c   Tomi Valkeinen
• [PATCHv2 2/2] Input: ads7846 - configure pendown gpio as input   Varadarajan, Charulatha
• [PATCH v3 2/2] Input: ads7846: use gpio_request_one to configure pendown_gpio   Varadarajan, Charulatha
• [PATCH RFC] arm: omap3evm: Add support for an MT9M032 based camera board.   Varadarajan, Charulatha
• [PATCH] OMAP: IOMMU: add missing function declaration   Varadarajan, Charulatha
• [PATCH resend] omap: rx51: Add SI4713 FM transmitter   Varadarajan, Charulatha
• [PATCH] ARM: pxa: Properly configure PWM period for palm27x   Marek Vasut
• [PATCH] OMAP1: Fix non-working LCD on OMAP310   Marek Vasut
• [PATCH 3/6] PalmTC: switch to using gpio-vbus transceiver   Marek Vasut
• [PATCH 1/2] ARM: PXA: PXAFB: Fix double-free issue.   Marek Vasut
• Question About Linux Memory Mapping   Marek Vasut
• [PATCH v2 1/3] ARM: PXA: PXAFB: Fix double-free issue   Marek Vasut
• [PATCH v2 3/3] ARM: PXA: PXAFB: Fix typo in ypos assignment   Marek Vasut
• [PATCH] msm: Remove arch-specific gpiomux tables   Rohit Vaswani
• [PATCH] msm: Remove arch-specific gpiomux tables   Rohit Vaswani
• [PATCH] msm: gpiomux: decentralize and modularize gpiomux init.   Rohit Vaswani
• [PATCH] msm: gpiomux: Remove GPIOMUX_VALID and merge config enums   Rohit Vaswani
• [PATCH] msm: gpiomux: Remove GPIOMUX_VALID and merge config enums   Rohit Vaswani
• [PATCH REPOST] ARM: bitops: Use BX instead of MOV PC,LR   Rabin Vincent
• Question about ARM function graph tracing   Rabin Vincent
• [PATCH] ARM: perf_event: support dual-core with single PMU IRQ   Rabin Vincent
• [PATCH] ARM: perf_event: support dual-core with single PMU IRQ   Rabin Vincent
• [PATCH] RFC: ux500: add PMU resources   Rabin Vincent
• [PATCH] RFC: ux500: add PMU resources   Rabin Vincent
• [PATCHv2 1/2] ARM: perf_event: allow platform-specific interrupt handler   Rabin Vincent
• [PATCHv2 2/2] ux500: DB8500 PMU support   Rabin Vincent
• [PATCH] ARM: perf/oprofile: fix off-by-one in stack check   Rabin Vincent
• [PATCHv2] ARM: perf/oprofile: fix off-by-one in stack check   Rabin Vincent
• reboot not working on linux-2.6.37 for ARMv7   Rabin Vincent
• [PATCHv2 1/2] ARM: perf_event: allow platform-specific interrupt handler   Rabin Vincent
• [PATCH] ARM: gic: use handle_fasteoi_irq for SPIs   Rabin Vincent
• [PATCH] ARM: gic: use handle_fasteoi_irq for SPIs   Rabin Vincent
• [PATCH] ARM: gic: use handle_fasteoi_irq for SPIs   Rabin Vincent
• [PATCH] amba: move to pm ops   Rabin Vincent
• platform/i2c busses: pm runtime and system sleep   Rabin Vincent
• [PATCHv2 1/2] ARM: perf_event: allow platform-specific interrupt handler   Rabin Vincent
• platform/i2c busses: pm runtime and system sleep   Rabin Vincent
• platform/i2c busses: pm runtime and system sleep   Rabin Vincent
• platform/i2c busses: pm runtime and system sleep   Rabin Vincent
• [PATCHv2] amba: support pm ops   Rabin Vincent
• [linux-pm] [PATCH] amba: move to pm ops   Rabin Vincent
• [PATCHv3] amba: support pm ops   Rabin Vincent
• [linux-pm] [PATCHv2] amba: support pm ops   Rabin Vincent
• [PATCH] nmk-gpio: use request_irq instead of chained handler   Rabin Vincent
• [PATCH] nmk-gpio: use request_irq instead of chained handler   Rabin Vincent
• [PATCH] nmk-gpio: use request_irq instead of chained handler   Rabin Vincent
• [PATCH v2] tty: Add msm_smd_tty driver   Niranjana Vishwanathapura
• [PATCH v2] msm: rmnet: msm rmnet smd virtual network driver   Niranjana Vishwanathapura
• [PATCH 1/2] lib: vsprintf: optimised put_dec() function   Denys Vlasenko
• When does mach-types get updated in a tree?   Detlef Vollmann
• [PATCH 2/5] mmc: sdhci-esdhc: broken card detection is not a default quirk   Anton Vorontsov
• [PATCH 0/7] Nexus One Support   Daniel Walker
• [PATCH 1/3] msm: iommu: Create a Kconfig item for the IOMMU driver   Daniel Walker
• [PATCH 2/3] msm: iommu: Generalize platform data for multiple targets   Daniel Walker
• [PATCH 2/3] msm: iommu: Generalize platform data for multiple targets   Daniel Walker
• [PATCH 2/3] msm: iommu: Generalize platform data for multiple targets   Daniel Walker
• [PATCH 2/3] msm: iommu: Generalize platform data for multiple targets   Daniel Walker
• [PATCH 2/3] msm: iommu: Generalize platform data for multiple targets   Daniel Walker
• [PATCH 2/3] msm: iommu: Generalize platform data for multiple targets   Daniel Walker
• [PATCH 2/3] msm: iommu: Generalize platform data for multiple targets   Daniel Walker
• [PATCH 2/3] msm: iommu: Generalize platform data for multiple targets   Daniel Walker
• [PATCH 1/3] msm: iommu: Create a Kconfig item for the IOMMU driver   Daniel Walker
• [PATCH 1/3] msm: iommu: Create a Kconfig item for the IOMMU driver   Daniel Walker
• [PATCH] msm: add single-wire serial bus interface (SSBI) driver   Daniel Walker
• [PATCH] msm: add single-wire serial bus interface (SSBI) driver   Daniel Walker
• [PATCH] msm: headsmp.S: Fix section mismatch   Daniel Walker
• [PATCH] msm: add single-wire serial bus interface (SSBI) driver   Daniel Walker
• [PATCH] MAINTAINERS: Update MSM maintainers   Daniel Walker
• [PATCH] msm: add single-wire serial bus interface (SSBI) driver   Daniel Walker
• [PATCH] MAINTAINERS: Update MSM maintainers   Daniel Walker
• [PATCH v2 2/2] msm: add single-wire serial bus interface (SSBI) driver   Daniel Walker
• [PATCH v2 2/2] msm: add single-wire serial bus interface (SSBI) driver   Daniel Walker
• [PATCH] mmci: restrict DMA usage to large, even multiblock transfers   Linus Walleij
• [PATCH] mmci: don't try DMA on anything <= fifosize   Linus Walleij
• [PATCH] mmci: restrict DMA usage to large, even multiblock transfers   Linus Walleij
• [PATCH] mmci: make sure DMA transfers wait for FIFO drain   Linus Walleij
• [PATCH] ARM: add PrimeCell generic DMA to MMCI/PL180   Linus Walleij
• [PATCH] arm: Improve MMC performance on Versatile Express   Linus Walleij
• [PATCH] mmci: restrict DMA usage to large, even multiblock transfers   Linus Walleij
• [PATCH] mmci: restrict DMA usage to large, even multiblock transfers   Linus Walleij
• [PATCH] u300: use mmci driver for GPIO card detect   Linus Walleij
• [PATCH 04/19] ab3100: mfd_cell is now implicitly available to drivers   Linus Walleij
• [PATCH] arm: Improve MMC performance on Versatile Express   Linus Walleij
• [PATCH 1/2] mach-u300: config U300 PL180 PL011 PL022 for DMA   Linus Walleij
• [PATCH 2/2] mach-ux500: config Ux500 PL011 PL022 PL180 for DMA   Linus Walleij
• [rtc-linux] [PATCH 00/20] world-writable files in sysfs and debugfs   Linus Walleij
• [PATCH] mmci: calculate remaining bytes at error correctly   Linus Walleij
• [RFC] add pwmlib support   Linus Walleij
• [PATCH] RFC: ux500: add PMU resources   Linus Walleij
• Short excursion into mmci.c vs msm_sdcc.c   Linus Walleij
• plat-nomadik: GPIO updates   Linus Walleij
• [PATCH 1/9] plat-nomadik: support varying number of GPIOs per block   Linus Walleij
• [PATCH 2/9] plat-nomadik: add custom dbg_show for GPIO   Linus Walleij
• [PATCH 3/9] plat-nomadik: implement suspend/resume for GPIO   Linus Walleij
• [PATCH 4/9] plat-nomadik: support secondary GPIO interrupts   Linus Walleij
• [PATCH 5/9] plat-nomadik: pull-up/down settings for GPIO resume   Linus Walleij
• [PATCH 6/9] plat-nomadik: type secondary IRQ correctly   Linus Walleij
• [PATCH 7/9] plat-nomadik: set altfunc to GPIO when enabling the sleep config   Linus Walleij
• [PATCH 8/9] plat-nomadik: implement safe switch sequence for Alt-C   Linus Walleij
• [PATCH 9/9] plat-nomadik: change sleep/wakeup setting in GPIO SLPM register   Linus Walleij
• [PATCH 1/4] spi/pl022: use dmaengine helper macros   Linus Walleij
• [PATCH 2/4] spi/pl022: disable core voltage when idle   Linus Walleij
• [PATCH 3/4] spi/pl022: remove dangling status check   Linus Walleij
• [PATCH 4/4] spi/pl022: minor kerneldoc updates   Linus Walleij
• [PATCH 1/4] spi/pl022: use dmaengine helper macros   Linus Walleij
• [PATCH 2/4] spi/pl022: disable core voltage when idle   Linus Walleij
• [PATCH 3/4] spi/pl022: remove dangling status check   Linus Walleij
• [PATCH 4/4] spi/pl022: minor kerneldoc updates   Linus Walleij
• [PATCH 6/9] plat-nomadik: type secondary IRQ correctly   Linus Walleij
• MMC quirks relating to performance/lifetime.   Linus Walleij
• [PATCH] mmci: make sure DMA transfers wait for FIFO drain   Linus Walleij
• [PATCH] mmci: make sure DMA transfers wait for FIFO drain   Linus Walleij
• MMC quirks relating to performance/lifetime.   Linus Walleij
• [RFC] Inter-processor Mailboxes Drivers   Linus Walleij
• [RFC] Inter-processor Mailboxes Drivers   Linus Walleij
• [RFC] Inter-processor Mailboxes Drivers   Linus Walleij
• [RFC] Inter-processor Mailboxes Drivers   Linus Walleij
• [PATCH] pl011: add optional RX DMA to PL011   Linus Walleij
• [PATCH] pl011: add optional RX DMA to PL011   Linus Walleij
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Linus Walleij
• [PATCH] dmaengine: add slave-dma maintainer   Linus Walleij
• [PATCH 1/3] mach-ux500: move MOP500 pins to separate file   Linus Walleij
• [PATCH 2/3] mach-ux500: add hrefv60 GPIO pins   Linus Walleij
• [PATCH 3/3] mach-ux500: basic HREFv60 support   Linus Walleij
• [PATCH 1/9] mfd-core: rename platform_data field of mfd_cell to mfd_data   Linus Walleij
• [PATCH] spi/pl022: rid dangling labels   Linus Walleij
• platform data and mfd design question   Linus Walleij
• [RFC] MMC: error handling improvements   Linus Walleij
• [RFC] MMC: error handling improvements   Linus Walleij
• [RFC] Inter-processor Mailboxes Drivers   Linus Walleij
• [PATCH 1/2] plat-nomadik: get rid of unused GPIO PM code   Linus Walleij
• [PATCH 2/2] plat-nomadik: fix compilation warning   Linus Walleij
• [PATCH] mach-ux500: basic HREFv60 support v2   Linus Walleij
• [RFC] MMC: error handling improvements   Linus Walleij
• platform/i2c busses: pm runtime and system sleep   Linus Walleij
• platform/i2c busses: pm runtime and system sleep   Linus Walleij
• [PATCH 1/2] pl011: add optional RX DMA to PL011 v2   Linus Walleij
• [PATCH 2/2] pl011: factor our FIFO to TTY code   Linus Walleij
• [GIT PULL] ARM: PMU for U8500   Linus Walleij
• [RFC] MMC: error handling improvements   Linus Walleij
• [PATCHv3] amba: support pm ops   Linus Walleij
• [PATCH] nmk-gpio: use request_irq instead of chained handler   Linus Walleij
• [PATCH 1/3] ARM: S5P: Add s5p_timer support for HRT   Linus Walleij
• [PATCH 03/19] ab3550: mfd_cell is now implicitly available to drivers   Mattias Wallin
• [PATCH 1/6] omap4: powerdomain: Add supported INACTIVE power state   Paul Walmsley
• [PATCH v2 1/9] omap4: powerdomain: Add supported INACTIVE power state   Paul Walmsley
• [PATCH v2 1/9] omap4: powerdomain: Add supported INACTIVE power state   Paul Walmsley
• [PATCH v2 3/9] omap4: powerdomain: Use intended PWRSTS_* flags instead of values   Paul Walmsley
• [PATCH v2 4/9] omap: clocks: Add checks to see if enable/disable ops are supported   Paul Walmsley
• [PATCH v2 6/9] omap: dpll: Add allow_idle/deny_idle support for all DPLL's   Paul Walmsley
• [PATCH v3] OMAP2/3: clock: fix fint calculation for DPLL_FREQSEL   Paul Walmsley
• [PATCH v2 6/9] omap: dpll: Add allow_idle/deny_idle support for all DPLL's   Paul Walmsley
• [PATCH v2 6/9] omap: dpll: Add allow_idle/deny_idle support for all DPLL's   Paul Walmsley
• [PATCH v2 2/9] omap4: prcm: Fix the CPUx clockdomain offsets   Paul Walmsley
• [PATCH v2 9/9] omap4: clockdomain: Fix the CPUx domain name   Paul Walmsley
• [PATCH 0/3] OMAP4 static dependency support   Paul Walmsley
• [PATCH 3/3] OMAP4: clockdomain: Add wkup/sleep dependency support   Paul Walmsley
• [PATCH v2] OMAP: hwmod: Do not expect an entry in clkdev for opt_clks   Paul Walmsley
• [PATCH] OMAP2/3: PM: remove unnecessary wakeup/sleep dependency clear   Paul Walmsley
• [PATCH] OMAP2/3: PM: remove unnecessary wakeup/sleep dependency clear   Paul Walmsley
• [PATCH v2 2/5] OMAP: clockdomain: Arch specific funcs to handle deps   Paul Walmsley
• [PATCH 3/3] OMAP4: clockdomain: Add wkup/sleep dependency support   Paul Walmsley
• [PATCH v2 2/5] OMAP: clockdomain: Arch specific funcs to handle deps   Paul Walmsley
• [PATCH 3/3] OMAP4: clockdomain: Add wkup/sleep dependency support   Paul Walmsley
• [PATCH 3/3] OMAP4: clockdomain: Add wkup/sleep dependency support   Paul Walmsley
• [PATCH 3/3] OMAP4: clockdomain: Add wkup/sleep dependency support   Paul Walmsley
• [PATCH 3/3] OMAP4: clockdomain: Add wkup/sleep dependency support   Paul Walmsley
• [PATCH 1/7] omap: clock: Check for enable/disable ops support   Paul Walmsley
• [PATCH 2/7] omap3: dpll: Populate clkops for dpll1_ck   Paul Walmsley
• [PATCH v2 3/7] omap: clock: Add allow_idle/deny_idle support in clkops   Paul Walmsley
• [PATCH v2 3/7] omap: clock: Add allow_idle/deny_idle support in clkops   Paul Walmsley
• [PATCH v2 4/7] omap: dpll: Add allow_idle/deny_idle support for all DPLL's   Paul Walmsley
• [PATCH v2 5/7] omap: dpll: Enable all OMAP3/4 dpll autoidle late at boot   Paul Walmsley
• [PATCH v2 6/7] omap4: dpll: Add dpll api to control GATE_CTRL   Paul Walmsley
• [PATCH v2 7/7] omap4: dpll: Enable auto gate control for all MX postdividers   Paul Walmsley
• [PATCH v2 0/7] clock/dpll autoidle support   Paul Walmsley
• [PATCH] OMAP4: clockdomain: Remove pr_errs' stating unsupported wkdep   Paul Walmsley
• [PATCH 3/3] OMAP4: clockdomain: Add wkup/sleep dependency support   Paul Walmsley
• [PATCH 1/7] omap: clock: Check for enable/disable ops support   Paul Walmsley
• [PATCH v2 3/7] omap: clock: Add allow_idle/deny_idle support in clkops   Paul Walmsley
• [PATCH v2 4/7] omap: dpll: Add allow_idle/deny_idle support for all DPLL's   Paul Walmsley
• [PATCH v2 5/7] omap: dpll: Enable all OMAP3/4 dpll autoidle late at boot   Paul Walmsley
• [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx   Paul Walmsley
• [PATCH 01/11] OMAP2+: clock: disable autoidle on all clocks during clock init   Paul Walmsley
• [PATCH 02/11] OMAP2: clock: add DPLL autoidle support   Paul Walmsley
• [PATCH 03/11] OMAP2xxx: clock: add clockfw autoidle support for APLLs   Paul Walmsley
• [PATCH 04/11] OMAP2+: clock: comment that osc_ck/osc_sys_ck should use clockfw autoidle control   Paul Walmsley
• [PATCH 05/11] OMAP2+: clock: add interface clock type code with autoidle support   Paul Walmsley
• [PATCH 06/11] OMAP2420: clock: add sdrc_ick   Paul Walmsley
• [PATCH 07/11] OMAP2420: clock: use autoidle clkops for all autoidle-controllable interface clocks   Paul Walmsley
• [PATCH 08/11] OMAP2430/3xxx: clock: add modem clock autoidle support   Paul Walmsley
• [PATCH 09/11] OMAP2430: clock: use autoidle clkops for all autoidle-controllable interface clocks   Paul Walmsley
• [PATCH 10/11] OMAP3: clock: use autoidle clkops for all autoidle-controllable interface clocks   Paul Walmsley
• [PATCH 11/11] OMAP2/3: PM: remove manual CM_AUTOIDLE bit setting in mach-omap2/pm*xx.c   Paul Walmsley
• [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx   Paul Walmsley
• [PATCH v2 5/7] omap: dpll: Enable all OMAP3/4 dpll autoidle late at boot   Paul Walmsley
• [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx   Paul Walmsley
• [PATCH 0/5] OMAP: clock: miscellaneous fixes and dead code removal for 2.6.39   Paul Walmsley
• [PATCH 1/5] OMAP2xxx: clock: fix parents for L3-derived clocks   Paul Walmsley
• [PATCH 2/5] OMAP2xxx: clock: fix low-frequency oscillator clock rate   Paul Walmsley
• [PATCH 3/5] OMAP2xxx: clock: fix interface clocks and clockdomains for modules in the WKUP domain   Paul Walmsley
• [PATCH 4/5] OMAP: clock: bail out early if arch_clock functions not implemented   Paul Walmsley
• [PATCH 5/5] OMAP2+: clock: remove the DPLL rate tolerance code   Paul Walmsley
• [PATCH 0/3] OMAP2+: voltage: first pass at cleanup/reorganization   Paul Walmsley
• [PATCH 1/3] OMAP: smartreflex: move plat/smartreflex.h to mach-omap2/smartreflex.h   Paul Walmsley
• [PATCH 2/3] OMAP: voltage: move plat/voltage.h to mach-omap2/voltage.h   Paul Walmsley
• [PATCH 3/3] OMAP2+: voltage: reorganize, split code from data   Paul Walmsley
• [PATCH 0/3] OMAP2+ hwmod fixes   Paul Walmsley
• [PATCH 1/3] OMAP: smartreflex: move plat/smartreflex.h to mach-omap2/smartreflex.h   Paul Walmsley
• [PATCH 3/3] OMAP2+: voltage: reorganize, split code from data   Paul Walmsley
• [PATCH 3/3] OMAP2+: voltage: reorganize, split code from data   Paul Walmsley
• [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG   Paul Walmsley
• [PATCH 0/3] OMAP2+ hwmod fixes   Paul Walmsley
• [PATCH] OMAP2+: clocksource: fix crash on boot when !CONFIG_OMAP_32K_TIMER   Paul Walmsley
• [PATCH 0/8] OMAP2+: hwmod/clockevent: allow late-init of individual hwmods   Paul Walmsley
• [PATCH 1/8] OMAP2420: hwmod data: add dmtimer   Paul Walmsley
• [PATCH 2/8] OMAP2430: hwmod data: add dmtimer   Paul Walmsley
• [PATCH 3/8] OMAP3: hwmod data: add dmtimer   Paul Walmsley
• [PATCH 4/8] OMAP2+: hwmod: find MPU initiator hwmod during in _register()   Paul Walmsley
• [PATCH 5/8] OMAP2+: hwmod: allow multiple calls to omap_hwmod_init()   Paul Walmsley
• [PATCH 6/8] OMAP2+: hwmod: ignore attempts to re-late-init a hwmod   Paul Walmsley
• [PATCH 7/8] OMAP2+: hwmod: add ability to late-init individual hwmods   Paul Walmsley
• [PATCH 8/8] OMAP2+: clockevent: late-init GPTIMER clockevent hwmod right before timer init   Paul Walmsley
• [PATCH 8/8] OMAP2+: clockevent: late-init GPTIMER clockevent hwmodright before timer init   Paul Walmsley
• [PATCH 8/8] OMAP2+: clockevent: late-init GPTIMER clockevent hwmodright before timer init   Paul Walmsley
• [PATCH 8/8] OMAP2+: clockevent: late-init GPTIMER clockevent hwmod right before timer init   Paul Walmsley
• [PATCH 8/8] OMAP2+: clockevent: late-init GPTIMER clockevent hwmodright before timer init   Paul Walmsley
• [PATCH 7/8] OMAP2+: hwmod: add ability to late-init individual hwmods   Paul Walmsley
• [PATCH 4/8] OMAP2+: hwmod: find MPU initiator hwmod during in _register()   Paul Walmsley
• [PATCH] OMAP4: clock: Support divider selection for auxclks   Paul Walmsley
• [PATCH] OMAP2+: clocksource: fix crash on boot when !CONFIG_OMAP_32K_TIMER   Paul Walmsley
• [PATCH 0/3] OMAP2+: voltage: first pass at cleanup/reorganization   Paul Walmsley
• [PATCH v2 2/9] omap4: prcm: Fix the CPUx clockdomain offsets   Paul Walmsley
• [PATCH v2 3/9] omap4: powerdomain: Use intended PWRSTS_* flags instead of values   Paul Walmsley
• OMAP2+: clock/MPU prcm: patches for the 2.6.38-rc series   Paul Walmsley
• [PATCH 0/3] OMAP2+: voltage: first pass at cleanup/reorganization   Paul Walmsley
• [PATCH 0/4] OMAP2/3: clock/clockdomains: miscellaneous fixes   Paul Walmsley
• [PATCH 1/4] OMAP2xxx: clock: remove dsp_irate_ick   Paul Walmsley
• [PATCH 2/4] OMAP2/3: clockdomains: remove warnings on an OMAP3-only compile   Paul Walmsley
• [PATCH 3/4] OMAP2xxx: clock: fix clockdomains on gpt7_ick, 2430 mmchs2_fck clocks   Paul Walmsley
• [PATCH 4/4] OMAP2xxx: clock data: clean up some comments   Paul Walmsley
• [PATCH] OMAP2+: sdrc: fix compile break on OMAP4-only config on current omap-for-linus   Paul Walmsley
• [PATCH] OMAP2+: sdrc: fix compile break on OMAP4-only config on current omap-for-linus   Paul Walmsley
• [PATCH 0/8] OMAP2+: hwmod/clockevent: allow late-init of individual hwmods   Paul Walmsley
• [PATCH v2 0/9] OMAP2+: hwmod/clockevent: allow hwmods to be set up individually   Paul Walmsley
• [PATCH v2 1/9] OMAP2420: hwmod data: add dmtimer   Paul Walmsley
• [PATCH v2 2/9] OMAP2430: hwmod data: add dmtimer   Paul Walmsley
• [PATCH v2 3/9] OMAP3: hwmod data: add dmtimer   Paul Walmsley
• [PATCH v2 4/9] OMAP2+: hwmod: allow multiple calls to omap_hwmod_init()   Paul Walmsley
• [PATCH v2 5/9] OMAP2+: hwmod: rename some init functions   Paul Walmsley
• [PATCH v2 6/9] OMAP2+: hwmod: find MPU initiator hwmod during in _register()   Paul Walmsley
• [PATCH v2 7/9] OMAP2+: hwmod: ignore attempts to re-setup a hwmod   Paul Walmsley
• [PATCH v2 8/9] OMAP2+: hwmod: add ability to setup individual hwmods   Paul Walmsley
• [PATCH v2 9/9] OMAP2+: clockevent: set up GPTIMER clockevent hwmod right before timer init   Paul Walmsley
• [PATCH] omap3: fix compile-time warnings   Paul Walmsley
• [PATCH 2/4] OMAP2/3: clockdomains: remove warnings on an OMAP3-only compile   Paul Walmsley
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• [PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption   Andrei Warkentin
• [PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption   Andrei Warkentin
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• [PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption   Andrei Warkentin
• [PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption   Andrei Warkentin
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• [PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption   Andrei Warkentin
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• [PATCH RFC] ARM: Make VMALLOC_END a variable   Stephen Warren
• [PATCH] [ARM] tegra: Add i2c support   Stephen Warren
• [PATCH v4 10/15] ARM: tegra: iomap: Add missing devices, fix use of SZ_8, SZ_64   Stephen Warren
• [PATCH 0/3] Tegra 640x480 HDMI audio patches   Stephen Warren
• [PATCH 1/3] ARM: Tegra: Add pll_d table entries for 252MHz   Stephen Warren
• [PATCH 2/3] video: tegra: Fix CTS/N table for 25.2MHz pclk, 44.1Hz audio   Stephen Warren
• [PATCH 3/3] video: tegra: Run pll_d at 252mhz for HDMI 640x480   Stephen Warren
• [PATCH 1/3] ARM: Tegra: Add pll_d table entries for 252MHz   Stephen Warren
• [PATCH 0/4] Misc Tegra patches   Stephen Warren
• [PATCH 1/4] ARM: tegra: Fix typo in TEGRA_IRQ_TO_GPIO   Stephen Warren
• [PATCH 2/4] ARM: tegra: Prevent requeuing in-progress DMA requests   Stephen Warren
• [PATCH 3/4] ARM: tegra: pinmux: Expose set_func, add get_*   Stephen Warren
• [PATCH 4/4] ARM: tegra: Move pinmux init call   Stephen Warren
• [PATCH 4/4] ARM: tegra: Move pinmux init call   Stephen Warren
• Problem with "ARM: tegra: Move tegra_common_init to tegra_init_early"   Stephen Warren
• [PATCH] ARM: Tegra: Make tegra_dma_init a postcore_initcall   Stephen Warren
• Problem with "ARM: tegra: Move tegra_common_init to tegra_init_early"   Stephen Warren
• [PATCH] ARM: Tegra: DMA: Fail safe if initialization fails   Stephen Warren
• [PATCH v2] ARM: Tegra: Make tegra_dma_init a postcore_initcall   Stephen Warren
• [PATCH] ARM: Tegra: DMA: Fail safe if initialization fails   Stephen Warren
• [PATCH 0/5] ARM: Tegra: Harmony: Enable audio driver   Stephen Warren
• [PATCH 1/5] ARM: Tegra: Add devices.c entries for audio   Stephen Warren
• [PATCH 2/5] ARM: Tegra: Rename I2S clocks to match driver name   Stephen Warren
• [PATCH 3/5] ARM: Tegra: Rename clk_dev1/2 to cdev1/2   Stephen Warren
• [PATCH 4/5] ARM: Tegra: Create defines for GPIO names   Stephen Warren
• [PATCH 5/5] ARM: Tegra: Enable Harmony audio support   Stephen Warren
• [PATCH v2] ARM: Tegra: DMA: Fail safe if initialization fails   Stephen Warren
• [PATCH 4/5] ARM: Tegra: Create defines for GPIO names   Stephen Warren
• [PATCH 4/5] ARM: Tegra: Create defines for GPIO names   Stephen Warren
• [PATCH 5/5] ARM: Tegra: Enable Harmony audio support   Stephen Warren
• [PATCH 5/5] ARM: Tegra: Enable Harmony audio support   Stephen Warren
• [PATCH 5/5] ARM: Tegra: Enable Harmony audio support   Stephen Warren
• [PATCH v3] ARM: Tegra: DMA: Fail safe if initialization fails   Stephen Warren
• [PATCH 5/5] ARM: Tegra: Enable Harmony audio support   Stephen Warren
• [PATCHv2 1/2] ads7846: OMAP3: Removal of warnings backtrace in bootup   Lothar Waßmann
• [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28   Lothar Waßmann
• [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28   Lothar Waßmann
• [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28   Lothar Waßmann
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Lothar Waßmann
• [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28   Lothar Waßmann
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Lothar Waßmann
• [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28   Lothar Waßmann
• [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28   Lothar Waßmann
• [PATCH 1/2] video: Add i.MX23/28 framebuffer driver   Lothar Waßmann
• [PATCH v2] i.MX51 iomux: Fixes MX51_PAD_UART2_TXD__UART2_TXD declaration   Lothar Waßmann
• [PATCH v2] i.MX51 iomux: Fixes MX51_PAD_UART2_TXD__UART2_TXD declaration   Lothar Waßmann
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Lothar Waßmann
• [PATCH 1/7] mmc: mxs-mmc: add mmc host driver for i.MX23/28   Lothar Waßmann
• [PATCH 5/5] arm: mach-mx3: use IMX_GPIO_NR instead of hard-coded values   Lothar Waßmann
• [PATCH v3] dmaengine: mxs-dma: add dma support for i.MX23/28   Lothar Waßmann
• [TRIVIAL/PATCH] ARM: hw_breakpoint: Fix newlines in WARN messages   Lothar Waßmann
• [PATCHv5] OMAP3: Devkit8000: Change lcd power pin   Thomas Weber
• [RFC/PATCH] OMAP: Fix section mismatch   Thomas Weber
• [PATCH 0/4] ARM: add support for hw-breakpoints [v4]   Ulrich Weigand
• Question about ARM function graph tracing   Frederic Weisbecker
• MMC quirks relating to performance/lifetime.   Lei Wen
• [PATCH V3 0/6] pxa3xx_nand update series set   Lei Wen
• [PATCH V3 2/6] pxa3xx_nand: rework irq logic   Lei Wen
• [PATCH V4 0/6] pxa3xx_nand update series set version 4   Lei Wen
• [PATCH 1/6] pxa3xx_nand: make scan procedure more clear   Lei Wen
• [PATCH 2/6] pxa3xx_nand: rework irq logic   Lei Wen
• [PATCH 3/6] pxa3xx_nand: discard wait_for_event, write_cmd, __readid function   Lei Wen
• [PATCH 4/6] pxa3xx_nand: unify prepare command   Lei Wen
• [PATCH 5/6] pxa3xx_nand: mtd scan id process could be defined by driver itself   Lei Wen
• [PATCH 6/6] pxa3xx_nand: clean the keep configure code   Lei Wen
• [PATCH V4 0/6] pxa3xx_nand update series set version 4   Lei Wen
• [PATCH 0/6] pxa3xx_nand update series set version 5   Lei Wen
• [PATCH V5 1/6] pxa3xx_nand: make scan procedure more clear   Lei Wen
• [PATCH V5 2/6] pxa3xx_nand: rework irq logic   Lei Wen
• [PATCH V5 3/6] pxa3xx_nand: discard wait_for_event, write_cmd, __readid function   Lei Wen
• [PATCH V5 4/6] pxa3xx_nand: unify prepare command   Lei Wen
• [PATCH V5 5/6] pxa3xx_nand: mtd scan id process could be defined by driver itself   Lei Wen
• [PATCH V5 6/6] pxa3xx_nand: clean the keep configure code   Lei Wen
• FW: [linux-cirrus] Fwd: Re: More about SD-Card problems   Mika Westerberg
• [alsa-devel] [PATCH] EDB93xx: Add support for CS4271 CODEC on EDB93xx boards   Mika Westerberg
• [PATCH v2] ARM: kexec: selective MMU identity mapping   Mika Westerberg
• [PATCH] ep93xx: correct the end address of the AC97 memory resource   Mika Westerberg
• [PATCH 2/2 v2] dma: ipu_idmac: do not lose valid received data in the irq handler   Dan Williams
• [PATCH 0/6] A few fixes on imx-sdma   Dan Williams
• [PATCH] dmaengine: add slave-dma maintainer   Dan Williams
• [GIT] dmaengine fixes for 2.6.38-rc5   Dan Williams
• [PATCH 1/4] davinci: da8xx/omap-l1: add support for SPI   Michael Williamson
• [PATCH 2/4] davinci: add spi devices support for MityDSP-L138/MityARM-1808 platform   Michael Williamson
• [PATCH 4/4] davinci: add spi devices support for da830/omap-l137/am17x evm   Michael Williamson
• [PATCH v1 0/4] davinci: Add SPI support for da8xx platforms   Michael Williamson
• [PATCH v1 1/4] davinci: da8xx/omap-l1: add support for SPI   Michael Williamson
• [PATCH v1 2/4] davinci: add spi devices support for MityDSP-L138/MityARM-1808 platform   Michael Williamson
• [PATCH v1 3/4] davinci: add spi devices support for da850/omap-l138/am18x evm   Michael Williamson
• [PATCH v1 4/4] davinci: add spi devices support for da830/omap-l137/am17x evm   Michael Williamson
• [PATCH v1 1/4] davinci: da8xx/omap-l1: add support for SPI   Michael Williamson
• [PATCH v1 1/4] davinci: da8xx/omap-l1: add support for SPI   Michael Williamson
• [PATCH v1 1/4] davinci: da8xx/omap-l1: add support for SPI   Michael Williamson
• [PATCH v1 1/4] davinci: da8xx/omap-l1: add support for SPI   Michael Williamson
• [PATCH v1 1/4] davinci: da8xx/omap-l1: add support for SPI   Michael Williamson
• [PATCH v1 1/4] davinci: da8xx/omap-l1: add support for SPI   Michael Williamson
• [PATCH] davinci: remove unused DA830_edma_ch enum   Michael Williamson
• [PATCH] davinci: da8xx: clean up magic numbers in devices-da8xx.c   Michael Williamson
• [PATCH 0/3] spi: davinci: move eventq parameter to platform data   Michael Williamson
• [PATCH 1/3] davinci: spi: move event_q parameter to platform data   Michael Williamson
• [PATCH 2/3] davinci: dm355: move spi0 eventq assignment from resources to platform data   Michael Williamson
• [PATCH 3/3] davinci: dm365: move spi0 eventq assignment from resources to platform data   Michael Williamson
• [PATCH 1/3] davinci: spi: move event_q parameter to platform data   Michael Williamson
• [PATCH v1] davinci: spi: move event queue parameter to platform data   Michael Williamson
• [PATCH v2] davinci: spi: move event queue parameter to platform data   Michael Williamson
• [PATCH v2 0/6] davinci: Add SPI support for da8xx platforms   Michael Williamson
• [PATCH v2 1/6] davinci: da830: fix driver name for spi clocks   Michael Williamson
• [PATCH v2 2/6] davinci: da850: add spi device clock definitions   Michael Williamson
• [PATCH v2 3/6] davinci: da8xx: add spi resources and registration routine   Michael Williamson
• [PATCH v2 4/6] davinci: add spi devices support for MityDSP-L138/MityARM-1808 platform   Michael Williamson
• [PATCH v2 5/6] davinci: add spi devices support for da850/omap-l138/am18x evm   Michael Williamson
• [PATCH v2 6/6] davinci: add spi devices support for da830/omap-l137/am17x evm   Michael Williamson
• [PATCH v2 11/13] da850: pruss SUART board specific additions.   Michael Williamson
• [PATCH v2 3/6] davinci: da8xx: add spi resources and registration routine   Michael Williamson
• [PATCH v2 5/6] davinci: add spi devices support for da850/omap-l138/am18x evm   Michael Williamson
• [PATCH v3 0/9] davinci: Add spi support for da8xx platforms   Michael Williamson
• [PATCH v3 1/9] davinci: remove unused DA830_edma_ch enum   Michael Williamson
• [PATCH v3 2/9] davinci: da8xx: clean up magic numbers in devices-da8xx.c   Michael Williamson
• [PATCH v3 3/9] davinci: spi: move event queue parameter to platform data   Michael Williamson
• [PATCH v3 4/9] davinci: da830: fix driver name for spi clocks   Michael Williamson
• [PATCH v3 5/9] davinci: da850: add spi device clock definitions   Michael Williamson
• [PATCH v3 6/9] davinci: da8xx: add spi resources and registration routine   Michael Williamson
• [PATCH v3 7/9] davinci: add spi devices support for MityDSP-L138/MityARM-1808 platform   Michael Williamson
• [PATCH v3 8/9] davinci: add spi devices support for da850/omap-l138/am18x evm   Michael Williamson
• [PATCH v3 9/9] davinci: add spi devices support for da830/omap-l137/am17x evm   Michael Williamson
• [PATCH v3 7/9] davinci: add spi devices support for MityDSP-L138/MityARM-1808 platform   Michael Williamson
• [PATCH v4 0/4] davinci: add spi devices support for da8xx based platforms   Michael Williamson
• [PATCH v4 1/4] davinci: da8xx: add spi resources and registration routine   Michael Williamson
• [PATCH v4 2/4] davinci: add spi devices support for MityDSP-L138/MityARM-1808 platform   Michael Williamson
• [PATCH v4 3/4] davinci: add spi devices support for da850/omap-l138/am18x evm   Michael Williamson
• [PATCH v4 4/4] davinci: add spi devices support for da830/omap-l137/am17x evm   Michael Williamson
• Good Day   Barrister Chong Kim Wong
• [PATCH V11 2/4] ptp: Added a clock that uses the eTSEC found on the MPC85xx.   Scott Wood
• [PATCH V11 2/4] ptp: Added a clock that uses the eTSEC found on the MPC85xx.   Scott Wood
• [PATCH V11 2/4] ptp: Added a clock that uses the eTSEC found on the MPC85xx.   Scott Wood
• [PATCH V11 2/4] ptp: Added a clock that uses the eTSEC found on the MPC85xx.   Scott Wood
• [PATCH] OMAP4: PandaBoard: Adding DVI support   Bryan Wu
• [PATCH] PM: Allow pm_runtime_suspend() to succeed during system suspend   Rafael J. Wysocki
• [PATCH] PM: Allow pm_runtime_suspend() to succeed during system suspend   Rafael J. Wysocki
• [PATCH] PM: Allow pm_runtime_suspend() to succeed during system suspend   Rafael J. Wysocki
• platform/i2c busses: pm runtime and system sleep   Rafael J. Wysocki
• platform/i2c busses: pm runtime and system sleep   Rafael J. Wysocki
• [linux-pm] [PATCHv2] amba: support pm ops   Rafael J. Wysocki
• [PATCHv3] amba: support pm ops   Rafael J. Wysocki
• [PATCHv3] amba: support pm ops   Rafael J. Wysocki
• [PATCH] PM: OPP: opp_find_freq_exact documentation fix   Rafael J. Wysocki
• [PATCH] picoxcell_crypto: add support for the picoxcell crypto engines   Herbert Xu
• [RFC,PATCH 1/3] Add a common struct clk   Dima Zavin
• [PATCH] msm: Remove arch-specific gpiomux tables   Dima Zavin
• [PATCH] ARM: mm: enforce pageblock alignment when freeing memmap entries at init   Dima Zavin
• [PATCH] ARM: mm: don't free memmap entries in the middle of a MAX_ORDER_NR_PAGES block   Dima Zavin
• [PATCH] msm: add single-wire serial bus interface (SSBI) driver   Dima Zavin
• [PATCH v2 2/2] msm: add single-wire serial bus interface (SSBI) driver   Dima Zavin
• [PATCH] msm: gpiomux: Remove GPIOMUX_VALID and merge config enums   Dima Zavin
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Richard Zhao
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Richard Zhao
• Locking in the clk API, part 2: clk_prepare/clk_unprepare   Richard Zhao
• [RFC, PATCH 3/3] clk: add warnings for incorrect enable/prepare semantics   Richard Zhao
• [RFC,PATCH 1/3] Add a common struct clk   Richard Zhao
• [RFC,PATCH 1/3] Add a common struct clk   Richard Zhao
• [RFC,PATCH 1/3] Add a common struct clk   Richard Zhao
• [PATCH] i.MX51 iomux: Fixes MX51_PAD_UART2_TXD__UART2_TXD declaration   Richard Zhao
• [PATCH 1/2] arm: mx50_rdp: add fec support   Richard Zhao
• [PATCH 2/2] ARM: imx50: correct iomux-mx50.h wrong daisy chain settings   Richard Zhao
• [PATCH 1/2] arm: mx50_rdp: add fec support   Richard Zhao
• [PATCH v2] i.MX51 iomux: Fixes MX51_PAD_UART2_TXD__UART2_TXD declaration   Richard Zhao
• [PATCH v2] i.MX51 iomux: Fixes MX51_PAD_UART2_TXD__UART2_TXD declaration   Richard Zhao
• [PATCH v2] i.MX51 iomux: Fixes MX51_PAD_UART2_TXD__UART2_TXD declaration   Richard Zhao
• [RFC,PATCH 1/3] Add a common struct clk   Richard Zhao
• [PATCH RESEND 1/4] ARM: imx53_loco: add all pad configure.   Richard Zhao
• [PATCH RESEND 2/4] ARM: imx53_loco add uncompress print   Richard Zhao
• [PATCH RESEND 3/4] ARM: imx53_loco: add i2c device support   Richard Zhao
• [PATCH RESEND 4/4] ARM: imx50: correct iomux-mx50.h wrong daisy chain settings   Richard Zhao
• [PATCH 1/1] ARM: imx53: correct Silicon Revision definition following fuse map   Richard Zhao
• [PATCH RESEND 3/4] ARM: imx53_loco: add i2c device support   Richard Zhao
• [PATCH 1/1] ARM: imx53: correct Silicon Revision definition following fuse map   Richard Zhao
• [PATCH v2 1/1] ARM: imx53: correct Silicon Revision definition following fuse map   Richard Zhao
• [PATCH 1/5] ARM: imx53: add sdhc pad settings   Richard Zhao
• [PATCH 2/5] ARM: imx51/53: add sdhc3/4 clock   Richard Zhao
• [PATCH 3/5] ARM: imx53_loco: add esdhc device support   Richard Zhao
• [PATCH 4/5] mm: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS   Richard Zhao
• [PATCH 5/5] mmc: sdhci: add quirk SDHCI_QUIRK_FIX_NO_INT_IN_MULTI_BLK_IO   Richard Zhao
• [PATCH 5/5] mmc: sdhci: add quirk SDHCI_QUIRK_FIX_NO_INT_IN_MULTI_BLK_IO   Richard Zhao
• [PATCH 2/5] ARM: imx51/53: add sdhc3/4 clock   Richard Zhao
• [PATCH v2 1/5] ARM: imx53: add sdhc pad settings   Richard Zhao
• [PATCH v2 2/5] ARM: imx51/53: add sdhc3/4 clock   Richard Zhao
• [PATCH v2 5/5] mmc: sdhci-esdhc: enable esdhc on imx53   Richard Zhao
• [PATCH v2 1/1] ARM: imx53: correct Silicon Revision definition following fuse map   Richard Zhao
• [PATCH V3 1/4] ARM: imx53_loco: add esdhc device support   Richard Zhao
• [RFC 1/5] ARM: P2V: separate PHYS_OFFSET from platform definitions   JD (Jiandong) Zheng
• [PATCH] i.MX23/28 framebuffer driver   Jammy Zhou
• [PATCH] i.MX23/28 framebuffer driver   Jammy Zhou
• [PATCH] i.MX23/28 framebuffer driver   Jammy Zhou
• [PATCH v2 1/5] ARM: imx53: add sdhc pad settings   Richard Zhu
• [PATCH v2 2/5] ARM: imx51/53: add sdhc3/4 clock   Richard Zhu
• [PATCH v2 3/5] ARM: imx53_loco: add esdhc device support   Richard Zhu
• [PATCH v2 4/5] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS   Richard Zhu
• [PATCH v2 5/5] mmc: sdhci-esdhc: enable esdhc on imx53   Richard Zhu
• [PATCH V3 1/4] ARM: imx53_loco: add esdhc device support   Richard Zhu
• [PATCH V3 2/4] ARM: imx51/53: add sdhc3/4 clock   Richard Zhu
• [PATCH V3 3/4] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS   Richard Zhu
• [PATCH V3 4/4] mmc: sdhci-esdhc: enable esdhc on imx53   Richard Zhu
• [PATCH V3 1/4] ARM: imx53_loco: add esdhc device support   Richard Zhu
• [PATCH V3 2/4] ARM: imx51/53: add sdhc3/4 clock   Richard Zhu
• [PATCH V3 3/4] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS   Richard Zhu
• [PATCH V3 4/4] mmc: sdhci-esdhc: enable esdhc on imx53   Richard Zhu
• [PATCH] ARM: pxa: support 806MHz operating points for PXA31x processors A2 stepping   Haojian Zhuang
• [PATCH] sched: provide scheduler_ipi() callback in response to smp_send_reschedule()   Peter Zijlstra
• [PATCH] sched: provide scheduler_ipi() callback in response to smp_send_reschedule()   Peter Zijlstra
• [RFC 1/5] ARM: P2V: separate PHYS_OFFSET from platform definitions   Wan ZongShun
• [PATCH v1 4/9] can: pruss CAN driver.   Detlev Zundel
• [PATCH 2/2 v2] dma: ipu_idmac: do not lose valid received data in the irq handler   Detlev Zundel
• [PATCH 2/2 v2] dma: ipu_idmac: do not lose valid received data in the irq handler   Detlev Zundel
• [PATCH -next] ALSA: AACI: fix crash in aaci_size_fifo   Marc Zyngier
• [PATCH -next] ALSA: AACI: fix crash in aaci_size_fifo   Marc Zyngier
• fwd: [klibc] fix up ARM assembly to use 'bx lr' in place of 'mov pc, lr'.   maximilian attems
• [PATCH v3 2/5] ARM: pm: add generic CPU suspend/resume support   saeed bishara
• [PATCH v3 2/5] ARM: pm: add generic CPU suspend/resume support   saeed bishara
• [PATCH v3 2/5] ARM: pm: add generic CPU suspend/resume support   saeed bishara
• [PATCH v3 2/5] ARM: pm: add generic CPU suspend/resume support   saeed bishara
• [PATCH] i.MX51 iomux: Fixes MX51_PAD_UART2_TXD__UART2_TXD declaration   julien.boibessot at free.fr
• [PATCH v2] i.MX51 iomux: Fixes MX51_PAD_UART2_TXD__UART2_TXD declaration   julien.boibessot at free.fr
• [PATCH v3] i.MX51 iomux: Fixes MX51_PAD_UART2_TXD__UART2_TXD & MX51_PAD_USBH1_DATA2__UART2_TXD declarations   julien.boibessot at free.fr
• [PATCH 1/3] IPUv3: Add i.MX53 IPU support   jason.chen at freescale.com
• [PATCH 2/3] ARM i.MX53 LoCo: Add ipu device & framebuffer support   jason.chen at freescale.com
• [PATCH 3/3] ARM i.MX53 LoCo: Add PWM backlight device support   jason.chen at freescale.com
• reboot not working on linux-2.6.37 for ARMv7   shiraz hashim
• reboot not working on linux-2.6.37 for ARMv7   shiraz hashim
• reboot not working on linux-2.6.37 for ARMv7   shiraz hashim
• reboot not working on linux-2.6.37 for ARMv7   shiraz hashim
• [PATCH 0/4] ARM: add support for hw-breakpoints [v4]   karthikeyan.s
• [PATCH] ARM: errata: pl310 cache sync operation may be faulty   srinidhi kasagar
• [PATCH] ARM: errata: pl310 cache sync operation may be faulty   srinidhi kasagar
• [PATCH] ARM: errata: pl310 cache sync operation may be faulty   srinidhi kasagar
• [PATCHv6] watchdog: add support for the Synopsys DesignWare WDT   viresh kumar
• reboot not working on linux-2.6.37 for ARMv7   viresh kumar
• [PATCH V5 00/63] Updating SPEAr Support   viresh kumar
• [PATCH V5 resend 39/63] SPEAr CPU freq: Adding support for CPU Freq framework   viresh kumar
• [PATCH V5 12/63] ST SPEAr: Adding support for CLCD on SPEAr3xx/6xx   viresh kumar
• [PATCH V4 resend] rtc: Adding support for spear rtc   viresh kumar
• [PATCH V5 03/63] sp810 Fix: Switch to slow mode before sysctl_soft_reset   viresh kumar
• [PATCH V5 41/63] ST SPEAr: replace readl, writel with readl_relaxed, writel_relaxed in uncompress.h   viresh kumar
• [PATCH V5 15/63] ST SPEAr: Correcting SOC Config base address for spear320   viresh kumar
• [PATCH V5 57/63] ST SPEAr3xx: Updating plgpio and emi source to make it compliant with single image strategy   viresh kumar
• [PATCH V5 00/63] Updating SPEAr Support   viresh kumar
• [PATCH V5 29/63] ST SPEAr: Changing resource size of amba devices to SZ_4K   viresh kumar
• [PATCH V5 30/63] ST SPEAr: Replacing SIZE macro's with actual required size   viresh kumar
• [PATCH V5 30/63] ST SPEAr: Replacing SIZE macro's with actual required size   viresh kumar
• [PATCH V5 30/63] ST SPEAr: Replacing SIZE macro's with actual required size   viresh kumar
• [PATCH V5 30/63] ST SPEAr: Replacing SIZE macro's with actual required size   viresh kumar
• [PATCH 3/8 resend] dw_dmac: call dwc_scan_descriptor from dwc_issue_pending only if active list is empty   viresh kumar
• [PATCH 6/8 resend] dw_dmac: Mark all tx_descriptors with DMA_CRTL_ACK after xfer finish   viresh kumar
• [PATCH] drivers: ld9040 amoled driver support   leedonghwa
• [PATCH 0/2] cpuidle driver on iMX platform   yong.shen at linaro.org
• [PATCH 1/2] ARM: iMX: cpuidle driver   yong.shen at linaro.org
• [PATCH 2/2] ARM: iMX5 BBG: add cpuidle driver parameters   yong.shen at linaro.org
• [PATCH v2 0/2] ARM: IMX5: cpuidle driver   yong.shen at linaro.org
• [PATCH v2 1/2] ARM: IMX5: cpuidle driver   yong.shen at linaro.org
• [PATCH v2 2/2] ARM: IMX5 bbg: add cpuidle parameters   yong.shen at linaro.org
• [PATCH v3 0/3] ARM: IMX5: cpuidle driver   yong.shen at linaro.org
• [PATCH v3 1/3] ARM: IMX: add tzic_enable_wake in the head file   yong.shen at linaro.org
• [PATCH v3 2/3] ARM: IMX5: cpuidle driver   yong.shen at linaro.org
• [PATCH v3 3/3] ARM: IMX5 bbg: add cpuidle parameters   yong.shen at linaro.org
• [PATCH] omap: use fncpy to copy the PM code functions to SRAM   jean.pihet at newoldbits.com
• [PATCH] perf: add OMAP support for the new power events   jean.pihet at newoldbits.com
• [PATCH 0/3] OMAP PM: implement the wake-up latency constraints using PM QOS   jean.pihet at newoldbits.com
• [PATCH 1/3] OMAP PM: create a PM layer plugin for the devices wakeup latency constraints   jean.pihet at newoldbits.com
• [PATCH 2/3] OMAP: implement MPU and DMA wake-up constraints using PM_QOS   jean.pihet at newoldbits.com
• [PATCH 3/3] OMAP: use PM QOS for wake-up constraints from I2C   jean.pihet at newoldbits.com
• [PATCH] arm: update gitignore file   rklein at nvidia.com
• [PATCH V3 1/1] ST SPEAr: PCIE gadget suppport   pratyush
• [PATCH V3 1/1] ST SPEAr: PCIE gadget suppport   pratyush
• [PATCH V5] ST SPEAr: PCIE gadget suppport   pratyush
• Question about free_pgd_slow ?   rocky
• One quick question about SMP on ARM   rocky
• [PATCH V5 resend 39/63] SPEAr CPU freq: Adding support for CPU Freq framework   stanley.miao
• [PATCH V5 00/63] Updating SPEAr Support   stanley.miao
• [PATCH V6 13/63] ST SPEAr: Updating Clock Support   stanley.miao
• LAN9313 switch support   rohan tabish
• [PATCH v10 05/18] OMAP2, 3 DSS2 Change driver name to omap_display   archit taneja
• [PATCH v10 05/18] OMAP2, 3 DSS2 Change driver name to omap_display   archit taneja
• [PATCH] omap2plus: smartreflex: remove sr debug directory in omap_sr_remove()   sawant at ti.com
• compiling 2.6.37 kernel in THUMB2 mode   vb at vsbe.com
• compiling 2.6.37 kernel in THUMB2 mode   vb at vsbe.com
• compiling 2.6.37 kernel in THUMB2 mode   vb at vsbe.com
• compiling 2.6.37 kernel in THUMB2 mode   vb at vsbe.com
• Question About Linux Memory Mapping   hong zhang
• ep93xx: IP-Config: Failed to open eth0   余谨智
• ep93xx: Failed to open eth0   余谨智
• SAMSUNG: any example code for soc_camera, tv output, etc...?   余谨智