[PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption
Santosh Shilimkar
santosh.shilimkar at ti.com
Tue Feb 15 02:14:17 EST 2011
> -----Original Message-----
> From: Santosh Shilimkar [mailto:santosh.shilimkar at ti.com]
> Sent: Monday, February 14, 2011 10:39 AM
> To: Andrei Warkentin
> Cc: linux-omap at vger.kernel.org; Kevin Hilman; tony at atomide.com;
> linux-arm-kernel at lists.infradead.org; Catalin Marinas
> Subject: RE: [PATCH 3/5] ARM: l2x0: Errata fix for flush by Way
> operation can cause data corruption
>
[....]
> > ...
> I understood that from first comment. But I am not in favor
> of polluting common ARM files with SOC specific #ifdeffery.
> We have gone over this when first errata support
> was added for PL310
>
> I have a better way to handle this scenario.
> Expect an updated patch for this.
>
Below is the updated version which should remove any
OMAP dependency on these errata's. Attached same.
----
From: Santosh Shilimkar <santosh.shilimkar at ti.com>
Date: Fri, 14 Jan 2011 14:16:04 +0530
Subject: [v2 PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation
can cause data corruption
PL310 implements the Clean & Invalidate by Way L2 cache maintenance
operation (offset 0x7FC). This operation runs in background so that
PL310 can handle normal accesses while it is in progress. Under very
rare circumstances, due to this erratum, write data can be lost when
PL310 treats a cacheable write transaction during a Clean & Invalidate
by Way operation.
Workaround:
Disable Write-Back and Cache Linefill (Debug Control Register)
Clean & Invalidate by Way (0x7FC)
Re-enable Write-Back and Cache Linefill (Debug Control Register)
Signed-off-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
Cc: Catalin Marinas <catalin.marinas at arm.com>
---
arch/arm/Kconfig | 13 ++++++++++++-
arch/arm/include/asm/outercache.h | 1 +
arch/arm/mach-omap2/Kconfig | 3 +++
arch/arm/mach-omap2/omap4-common.c | 7 +++++++
arch/arm/mm/cache-l2x0.c | 28 +++++++++++++++-------------
5 files changed, 38 insertions(+), 14 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5cff165..ebadd95 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1140,7 +1140,7 @@ config ARM_ERRATA_742231
config PL310_ERRATA_588369
bool "Clean & Invalidate maintenance operations do not invalidate
clean lines"
- depends on CACHE_L2X0 && ARCH_OMAP4
+ depends on CACHE_L2X0 && CACHE_PL310
help
The PL310 L2 cache controller implements three types of Clean &
Invalidate maintenance operations: by Physical Address
@@ -1177,6 +1177,17 @@ config ARM_ERRATA_743622
visible impact on the overall performance or power consumption
of the
processor.
+config PL310_ERRATA_727915
+ bool "Background Clean & Invalidate by Way operation can cause
data corruption"
+ depends on CACHE_L2X0 && CACHE_PL310
+ help
+ PL310 implements the Clean & Invalidate by Way L2 cache
maintenance
+ operation (offset 0x7FC). This operation runs in background so
that
+ PL310 can handle normal accesses while it is in progress. Under
very
+ rare circumstances, due to this erratum, write data can be lost
when
+ PL310 treats a cacheable write transaction during a Clean &
+ Invalidate by Way operation Note that this errata uses Texas
+ Instrument's secure monitor api to implement the work around.
endmenu
source "arch/arm/common/Kconfig"
diff --git a/arch/arm/include/asm/outercache.h
b/arch/arm/include/asm/outercache.h
index fc19009..348d513 100644
--- a/arch/arm/include/asm/outercache.h
+++ b/arch/arm/include/asm/outercache.h
@@ -31,6 +31,7 @@ struct outer_cache_fns {
#ifdef CONFIG_OUTER_CACHE_SYNC
void (*sync)(void);
#endif
+ void (*set_debug)(unsigned long);
};
#ifdef CONFIG_OUTER_CACHE
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index f285dd7..fd11ab4 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -45,7 +45,10 @@ config ARCH_OMAP4
select CPU_V7
select ARM_GIC
select LOCAL_TIMERS
+ select CACHE_L2X0
+ select CACHE_PL310
select PL310_ERRATA_588369
+ select PL310_ERRATA_727915
select ARM_ERRATA_720789
select ARCH_HAS_OPP
select PM_OPP if PM
diff --git a/arch/arm/mach-omap2/omap4-common.c
b/arch/arm/mach-omap2/omap4-common.c
index 1926864..9ef8c29 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -52,6 +52,12 @@ static void omap4_l2x0_disable(void)
omap_smc1(0x102, 0x0);
}
+static void omap4_l2x0_set_debug(unsigned long val)
+{
+ /* Program PL310 L2 Cache controller debug register */
+ omap_smc1(0x100, val);
+}
+
static int __init omap_l2_cache_init(void)
{
u32 aux_ctrl = 0;
@@ -99,6 +105,7 @@ static int __init omap_l2_cache_init(void)
* specific one
*/
outer_cache.disable = omap4_l2x0_disable;
+ outer_cache.set_debug = omap4_l2x0_set_debug;
return 0;
}
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 170c9bb..a8caee4 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -67,18 +67,22 @@ static inline void l2x0_inv_line(unsigned long addr)
writel_relaxed(addr, base + L2X0_INV_LINE_PA);
}
-#ifdef CONFIG_PL310_ERRATA_588369
+#if defined(CONFIG_PL310_ERRATA_588369) ||
defined(CONFIG_PL310_ERRATA_727915)
static void debug_writel(unsigned long val)
{
- extern void omap_smc1(u32 fn, u32 arg);
-
- /*
- * Texas Instrument secure monitor api to modify the
- * PL310 Debug Control Register.
- */
- omap_smc1(0x100, val);
+ if (outer_cache.set_debug)
+ outer_cache.set_debug(val);
+ else
+ writel(val, l2x0_base + L2X0_DEBUG_CTRL);
+}
+#else
+/* Optimised out for non-errata case */
+static inline void debug_writel(unsigned long val)
+{
}
+#endif
+#ifdef CONFIG_PL310_ERRATA_588369
static inline void l2x0_flush_line(unsigned long addr)
{
void __iomem *base = l2x0_base;
@@ -91,11 +95,6 @@ static inline void l2x0_flush_line(unsigned long addr)
}
#else
-/* Optimised out for non-errata case */
-static inline void debug_writel(unsigned long val)
-{
-}
-
static inline void l2x0_flush_line(unsigned long addr)
{
void __iomem *base = l2x0_base;
@@ -119,9 +118,11 @@ static void l2x0_flush_all(void)
/* clean all ways */
spin_lock_irqsave(&l2x0_lock, flags);
+ debug_writel(0x03);
writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_INV_WAY);
cache_wait_way(l2x0_base + L2X0_CLEAN_INV_WAY, l2x0_way_mask);
cache_sync();
+ debug_writel(0x00);
spin_unlock_irqrestore(&l2x0_lock, flags);
}
@@ -329,6 +330,7 @@ void __init l2x0_init(void __iomem *base, __u32
aux_val, __u32 aux_mask)
outer_cache.flush_all = l2x0_flush_all;
outer_cache.inv_all = l2x0_inv_all;
outer_cache.disable = l2x0_disable;
+ outer_cache.set_debug = NULL;
printk(KERN_INFO "%s cache controller enabled\n", type);
printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x,
Cache size: %d B\n",
--
1.6.0.4
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0003-ARM-l2x0-Errata-fix-for-flush-by-Way-operation-can.patch
Type: application/octet-stream
Size: 6061 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20110215/2e6980b7/attachment-0001.obj>
More information about the linux-arm-kernel
mailing list