[PATCH 05/09] ARM: s3c2440: gta02: Fix regulator valid_modes_ops

[Kukjin Kim]

Lars-Peter Clausen wrote:
> 
> The REGULATOR_CHANGE_STATUS flag needs to be set on valid_ops_mask,
otherwise
> it
> a driver wont be able to turn the regulator on or off.
> 
> Signed-off-by: Lars-Peter Clausen <lars at metafoo.de>
> ---
>  arch/arm/mach-s3c2440/mach-gta02.c |    7 +++++--
>  1 files changed, 5 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-s3c2440/mach-gta02.c
b/arch/arm/mach-s3c2440/mach-
> gta02.c
> index 6629998..e57c4d8 100644
> --- a/arch/arm/mach-s3c2440/mach-gta02.c
> +++ b/arch/arm/mach-s3c2440/mach-gta02.c
> @@ -314,8 +314,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
>  				.min_uV = 2000000,
>  				.max_uV = 3300000,
>  				.valid_modes_mask = REGULATOR_MODE_NORMAL,
> -				.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
> -				.always_on = 1,
> +				.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
> +						REGULATOR_CHANGE_STATUS,
>  			},
>  		},
>  		[PCF50633_REGULATOR_LDO1] = {
> @@ -323,6 +323,7 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
>  				.min_uV = 3300000,
>  				.max_uV = 3300000,
>  				.valid_modes_mask = REGULATOR_MODE_NORMAL,
> +				.valid_ops_mask = REGULATOR_CHANGE_STATUS,
>  				.apply_uV = 1,
>  				.state_mem = {
>  					.enabled = 0,
> @@ -350,6 +351,7 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
>  				.min_uV = 3200000,
>  				.max_uV = 3200000,
>  				.valid_modes_mask = REGULATOR_MODE_NORMAL,
> +				.valid_ops_mask = REGULATOR_CHANGE_STATUS,
>  				.apply_uV = 1,
>  			},
>  		},
> @@ -358,6 +360,7 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
>  				.min_uV = 3000000,
>  				.max_uV = 3000000,
>  				.valid_modes_mask = REGULATOR_MODE_NORMAL,
> +				.valid_ops_mask = REGULATOR_CHANGE_STATUS,
>  				.apply_uV = 1,
>  				.state_mem = {
>  					.enabled = 1,
> --

Ok, will apply.
Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.