[PATCH 2/5] mmc: sdhci-esdhc: broken card detection is not a default quirk

Wolfram Sang w.sang at pengutronix.de
Tue Feb 22 07:58:17 EST 2011


It can be worked around using a GPIO which will be done for i.MX later.

Signed-off-by: Wolfram Sang <w.sang at pengutronix.de>
Acked-by: Anton Vorontsov <cbouatmailru at gmail.com>
Tested-by: Marc Reilly <marc at cpdesign.com.au>
---
 drivers/mmc/host/sdhci-esdhc-imx.c |    3 ++-
 drivers/mmc/host/sdhci-esdhc.h     |    1 -
 drivers/mmc/host/sdhci-of-esdhc.c  |    3 ++-
 3 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 65df00b..49c9801 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -171,7 +171,8 @@ static void esdhc_pltfm_exit(struct sdhci_host *host)
 }
 
 struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
-	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_ADMA,
+	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_ADMA
+			| SDHCI_QUIRK_BROKEN_CARD_DETECTION,
 	/* ADMA has issues. Might be fixable */
 	.ops = &sdhci_esdhc_ops,
 	.init = esdhc_pltfm_init,
diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h
index afaf1bc..c55aae8 100644
--- a/drivers/mmc/host/sdhci-esdhc.h
+++ b/drivers/mmc/host/sdhci-esdhc.h
@@ -19,7 +19,6 @@
  */
 
 #define ESDHC_DEFAULT_QUIRKS	(SDHCI_QUIRK_FORCE_BLK_SZ_2048 | \
-				SDHCI_QUIRK_BROKEN_CARD_DETECTION | \
 				SDHCI_QUIRK_NO_BUSY_IRQ | \
 				SDHCI_QUIRK_NONSTANDARD_CLOCK | \
 				SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | \
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index fcd0e1f..08161f6 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -73,7 +73,8 @@ static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host)
 }
 
 struct sdhci_of_data sdhci_esdhc = {
-	.quirks = ESDHC_DEFAULT_QUIRKS,
+	/* card detection could be handled via GPIO */
+	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION,
 	.ops = {
 		.read_l = sdhci_be32bs_readl,
 		.read_w = esdhc_readw,
-- 
1.7.2.3




More information about the linux-arm-kernel mailing list