[PATCH] msm: Remove arch-specific gpiomux tables
Rohit Vaswani
rvaswani at codeaurora.org
Fri Feb 4 20:44:03 EST 2011
The gpiomux configs are board-specific and thus should be
a part of the board file.
Signed-off-by: Rohit Vaswani <rvaswani at codeaurora.org>
---
arch/arm/mach-msm/Makefile | 4 +-
arch/arm/mach-msm/board-msm8x60.c | 3 ++
arch/arm/mach-msm/board-qsd8x50.c | 12 ++++++++
arch/arm/mach-msm/gpiomux-8x50.c | 51
-------------------------------------
arch/arm/mach-msm/gpiomux-8x60.c | 19 -------------
5 files changed, 17 insertions(+), 72 deletions(-)
delete mode 100644 arch/arm/mach-msm/gpiomux-8x50.c
delete mode 100644 arch/arm/mach-msm/gpiomux-8x60.c
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index ea8c74f..b6c6ec8 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -30,8 +30,8 @@ obj-$(CONFIG_ARCH_MSM8X60) += board-msm8x60.o
obj-$(CONFIG_ARCH_MSM8960) += board-msm8960.o devices-msm8960.o
obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-v1.o gpiomux.o
-obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o
-obj-$(CONFIG_ARCH_MSM8X60) += gpiomux-8x60.o gpiomux-v2.o gpiomux.o
+obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-v1.o gpiomux.o
+obj-$(CONFIG_ARCH_MSM8X60) += gpiomux-v2.o gpiomux.o
ifdef CONFIG_MSM_V2_TLMM
ifndef CONFIG_ARCH_MSM8960
# TODO: TLMM Mapping issues need to be resolved
diff --git a/arch/arm/mach-msm/board-msm8x60.c
b/arch/arm/mach-msm/board-msm8x60.c
index b3c55f1..6c0b868 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -27,6 +27,9 @@
#include <mach/board.h>
#include <mach/msm_iomap.h>
+#include "gpiomux.h"
+
+struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {};
static void __init msm8x60_map_io(void)
diff --git a/arch/arm/mach-msm/board-qsd8x50.c
b/arch/arm/mach-msm/board-qsd8x50.c
index b464d48..b63b7c4 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -36,9 +36,21 @@
#include <mach/mmc.h>
#include "devices.h"
+#include "gpiomux.h"
extern struct sys_timer msm_timer;
+struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
+ [86] = { /* UART3 RX */
+ .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+ GPIOMUX_FUNC_1 | GPIOMUX_VALID,
+ },
+ [87] = { /* UART3 TX */
+ .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+ GPIOMUX_FUNC_1 | GPIOMUX_VALID,
+ },
+};
+
static const resource_size_t qsd8x50_surf_smc91x_base __initdata =
0x70000300;
static const unsigned qsd8x50_surf_smc91x_gpio __initdata = 156;
diff --git a/arch/arm/mach-msm/gpiomux-8x50.c
b/arch/arm/mach-msm/gpiomux-8x50.c
deleted file mode 100644
index f7a4ea5..0000000
--- a/arch/arm/mach-msm/gpiomux-8x50.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#include "gpiomux.h"
-
-#if defined(CONFIG_MMC_MSM) || defined(CONFIG_MMC_MSM_MODULE)
- #define SDCC_DAT_0_3_CMD_ACTV_CFG (GPIOMUX_VALID | GPIOMUX_PULL_UP\
- | GPIOMUX_FUNC_1 | GPIOMUX_DRV_8MA)
- #define SDCC_CLK_ACTV_CFG (GPIOMUX_VALID | GPIOMUX_PULL_NONE\
- | GPIOMUX_FUNC_1 | GPIOMUX_DRV_8MA)
-#else
- #define SDCC_DAT_0_3_CMD_ACTV_CFG 0
- #define SDCC_CLK_ACTV_CFG 0
-#endif
-
-#define SDC1_SUSPEND_CONFIG (GPIOMUX_VALID | GPIOMUX_PULL_DOWN\
- | GPIOMUX_FUNC_GPIO | GPIOMUX_DRV_2MA)
-
-struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
- [86] = { /* UART3 RX */
- .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
- GPIOMUX_FUNC_1 | GPIOMUX_VALID,
- },
- [87] = { /* UART3 TX */
- .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
- GPIOMUX_FUNC_1 | GPIOMUX_VALID,
- },
- /* SDC1 data[3:0] & CMD */
- [51 ... 55] = {
- .active = SDCC_DAT_0_3_CMD_ACTV_CFG,
- .suspended = SDC1_SUSPEND_CONFIG
- },
- /* SDC1 CLK */
- [56] = {
- .active = SDCC_CLK_ACTV_CFG,
- .suspended = SDC1_SUSPEND_CONFIG
- },
-};
diff --git a/arch/arm/mach-msm/gpiomux-8x60.c
b/arch/arm/mach-msm/gpiomux-8x60.c
deleted file mode 100644
index 7b380b3..0000000
--- a/arch/arm/mach-msm/gpiomux-8x60.c
+++ /dev/null
@@ -1,19 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#include "gpiomux.h"
-
-struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {};
--
1.7.3.3
Thanks,
Rohit Vaswani
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
More information about the linux-arm-kernel
mailing list