[PATCH 2/2] ARM: S5PC110: add power consumers for hsotg for Goni board

Kukjin Kim kgene.kim at samsung.com
Wed Feb 23 05:27:05 EST 2011


Marek Szyprowski wrote:
> 
> This patch adds definitions for power consumers for s3c-hsotg driver
> on Goni board. The consumers are defined as arrays, because later more
> entries for MIPI and ADC will be defined.
> 
> Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
> ---
>  arch/arm/mach-s5pv210/mach-goni.c |   14 ++++++++++++++
>  1 files changed, 14 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-s5pv210/mach-goni.c
b/arch/arm/mach-s5pv210/mach-
> goni.c
> index 10f754b..796625c 100644
> --- a/arch/arm/mach-s5pv210/mach-goni.c
> +++ b/arch/arm/mach-s5pv210/mach-goni.c
> @@ -269,10 +269,18 @@ static void __init goni_tsp_init(void)
>  /* MAX8998 regulators */
>  #if defined(CONFIG_REGULATOR_MAX8998) ||
> defined(CONFIG_REGULATOR_MAX8998_MODULE)
> 
> +static struct regulator_consumer_supply goni_ldo3_consumers[] = {
> +	REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"),
> +};
> +
>  static struct regulator_consumer_supply goni_ldo5_consumers[] = {
>  	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
>  };
> 
> +static struct regulator_consumer_supply goni_ldo8_consumers[] = {
> +	REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"),
> +};
> +
>  static struct regulator_init_data goni_ldo2_data = {
>  	.constraints	= {
>  		.name		= "VALIVE_1.1V",
> @@ -292,7 +300,10 @@ static struct regulator_init_data goni_ldo3_data = {
>  		.min_uV		= 1100000,
>  		.max_uV		= 1100000,
>  		.apply_uV	= 1,
> +		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
>  	},
> +	.num_consumer_supplies = ARRAY_SIZE(goni_ldo3_consumers),
> +	.consumer_supplies = goni_ldo3_consumers,
>  };
> 
>  static struct regulator_init_data goni_ldo4_data = {
> @@ -341,7 +352,10 @@ static struct regulator_init_data goni_ldo8_data = {
>  		.min_uV		= 3300000,
>  		.max_uV		= 3300000,
>  		.apply_uV	= 1,
> +		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
>  	},
> +	.num_consumer_supplies = ARRAY_SIZE(goni_ldo8_consumers),
> +	.consumer_supplies = goni_ldo8_consumers,
>  };
> 
>  static struct regulator_init_data goni_ldo9_data = {
> --

Ok...will apply :)

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.




More information about the linux-arm-kernel mailing list