[PATCHv2 2/2] DM9000B: Fix PHY power for network down/up

[David Miller]

From: Henry Nestler <henry.nestler at gmail.com>
Date: Tue, 22 Feb 2011 22:29:42 +0100

> DM9000 revision B needs 1 ms delay after PHY power-on.
> PHY must be powered on by writing 0 into register DM9000_GPR before
> all other settings will change (see Davicom spec and example code).
> 
> Remember, that register DM9000_GPR was not changed by reset sequence.
> 
> Without this fix the FIFO is out of sync and sends wrong data after
> sequence of "ifconfig ethX down ; ifconfig ethX up".

I've applied both of your patches, thanks.