[PATCH 4/7] ARM: mxs: dynamically allocate mmc device
Shawn Guo
shawn.guo at freescale.com
Fri Feb 4 21:18:44 EST 2011
Signed-off-by: Shawn Guo <shawn.guo at freescale.com>
---
arch/arm/mach-mxs/clock-mx23.c | 16 +++++
arch/arm/mach-mxs/clock-mx28.c | 18 +++++
arch/arm/mach-mxs/devices-mx23.h | 4 +
arch/arm/mach-mxs/devices-mx28.h | 4 +
arch/arm/mach-mxs/devices/Kconfig | 3 +
arch/arm/mach-mxs/devices/Makefile | 1 +
arch/arm/mach-mxs/devices/platform-mmc.c | 80 +++++++++++++++++++++++
arch/arm/mach-mxs/include/mach/devices-common.h | 13 ++++
8 files changed, 139 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-mxs/devices/platform-mmc.c
diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c
index c19b69a..a1ed5f4 100644
--- a/arch/arm/mach-mxs/clock-mx23.c
+++ b/arch/arm/mach-mxs/clock-mx23.c
@@ -445,6 +445,7 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("rtc", NULL, rtc_clk)
_REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk)
_REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk)
+ _REGISTER_CLOCK("mxs-mmc.0", NULL, ssp_clk)
_REGISTER_CLOCK(NULL, "usb", usb_clk)
_REGISTER_CLOCK(NULL, "audio", audio_clk)
_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
@@ -515,6 +516,15 @@ static int clk_misc_init(void)
__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
+ /*
+ * 480 MHz seems too high to be ssp clock source directly,
+ * so set frac to get a 288 MHz ref_io.
+ */
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
+ reg &= ~BM_CLKCTRL_FRAC_IOFRAC;
+ reg |= 30 << BP_CLKCTRL_FRAC_IOFRAC;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
+
return 0;
}
@@ -522,6 +532,12 @@ int __init mx23_clocks_init(void)
{
clk_misc_init();
+ /*
+ * source ssp clock from ref_io than ref_xtal,
+ * as ref_xtal only provides 24 MHz as maximum.
+ */
+ clk_set_parent(&ssp_clk, &ref_io_clk);
+
clk_enable(&cpu_clk);
clk_enable(&hbus_clk);
clk_enable(&xbus_clk);
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 9f4ee36..aeb7b2c 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -619,6 +619,8 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("pll2", NULL, pll2_clk)
_REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk)
_REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk)
+ _REGISTER_CLOCK("mxs-mmc.0", NULL, ssp0_clk)
+ _REGISTER_CLOCK("mxs-mmc.1", NULL, ssp1_clk)
_REGISTER_CLOCK("flexcan.0", NULL, can0_clk)
_REGISTER_CLOCK("flexcan.1", NULL, can1_clk)
_REGISTER_CLOCK(NULL, "usb0", usb0_clk)
@@ -730,6 +732,15 @@ static int clk_misc_init(void)
reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+ /*
+ * 480 MHz seems too high to be ssp clock source directly,
+ * so set frac0 to get a 288 MHz ref_io0.
+ */
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
+ reg &= ~BM_CLKCTRL_FRAC0_IO0FRAC;
+ reg |= 30 << BP_CLKCTRL_FRAC0_IO0FRAC;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
+
return 0;
}
@@ -737,6 +748,13 @@ int __init mx28_clocks_init(void)
{
clk_misc_init();
+ /*
+ * source ssp clock from ref_io0 than ref_xtal,
+ * as ref_xtal only provides 24 MHz as maximum.
+ */
+ clk_set_parent(&ssp0_clk, &ref_io0_clk);
+ clk_set_parent(&ssp1_clk, &ref_io0_clk);
+
clk_enable(&cpu_clk);
clk_enable(&hbus_clk);
clk_enable(&xbus_clk);
diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h
index d5595ce..87c1cb5 100644
--- a/arch/arm/mach-mxs/devices-mx23.h
+++ b/arch/arm/mach-mxs/devices-mx23.h
@@ -20,3 +20,7 @@ extern const struct mxs_dma_data mx23_dma_data[] __initconst;
mxs_add_dma(&mx23_dma_data[0])
#define mx23_add_apbx_dma() \
mxs_add_dma(&mx23_dma_data[1])
+
+extern const struct mxs_mmc_data mx23_mmc_data[] __initconst;
+#define mx23_add_mmc(id, pdata) \
+ mxs_add_mmc(&mx23_mmc_data[id], pdata)
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
index e3a3bbc..74db564 100644
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -38,3 +38,7 @@ extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst;
mxs_add_flexcan(&mx28_flexcan_data[id], pdata)
#define mx28_add_flexcan0(pdata) mx28_add_flexcan(0, pdata)
#define mx28_add_flexcan1(pdata) mx28_add_flexcan(1, pdata)
+
+extern const struct mxs_mmc_data mx28_mmc_data[] __initconst;
+#define mx28_add_mmc(id, pdata) \
+ mxs_add_mmc(&mx28_mmc_data[id], pdata)
diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
index c2ddbc5..598a0ca 100644
--- a/arch/arm/mach-mxs/devices/Kconfig
+++ b/arch/arm/mach-mxs/devices/Kconfig
@@ -14,3 +14,6 @@ config MXS_HAVE_PLATFORM_FEC
config MXS_HAVE_PLATFORM_FLEXCAN
select HAVE_CAN_FLEXCAN if CAN
bool
+
+config MXS_HAVE_PLATFORM_MMC
+ bool
diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile
index 510849d..0d2909a 100644
--- a/arch/arm/mach-mxs/devices/Makefile
+++ b/arch/arm/mach-mxs/devices/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_MXS_HAVE_PLATFORM_AUART) += platform-auart.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_DMA) += platform-dma.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_MMC) += platform-mmc.o
diff --git a/arch/arm/mach-mxs/devices/platform-mmc.c b/arch/arm/mach-mxs/devices/platform-mmc.c
new file mode 100644
index 0000000..9065afa
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-mmc.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig at pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/compiler.h>
+#include <linux/err.h>
+#include <linux/init.h>
+
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+/*
+ * mx23 reference manual is indexing all ssp resources, iomux, clock,
+ * dma channel etc from 1 than 0, while mx28 starts from 0 as normal.
+ */
+#define mx23_mmc_data_entry_single(_id) \
+ { \
+ .id = _id - 1, \
+ .iobase = MX23_SSP ## _id ## _BASE_ADDR, \
+ .dma = MX23_DMA_SSP ## _id, \
+ .irq_err = MX23_INT_SSP ## _id ## _ERROR, \
+ .irq_dma = MX23_INT_SSP ## _id ## _DMA, \
+ }
+
+#define mx28_mmc_data_entry_single(_id) \
+ { \
+ .id = _id, \
+ .iobase = MX28_SSP ## _id ## _BASE_ADDR, \
+ .dma = MX28_DMA_SSP ## _id, \
+ .irq_err = MX28_INT_SSP ## _id ## _ERROR, \
+ .irq_dma = MX28_INT_SSP ## _id ## _DMA, \
+ }
+
+#ifdef CONFIG_SOC_IMX23
+const struct mxs_mmc_data mx23_mmc_data[] __initconst = {
+ mx23_mmc_data_entry_single(1),
+ mx23_mmc_data_entry_single(2),
+};
+#endif
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_mmc_data mx28_mmc_data[] __initconst = {
+ mx28_mmc_data_entry_single(0),
+ mx28_mmc_data_entry_single(1),
+};
+#endif
+
+struct platform_device *__init mxs_add_mmc(
+ const struct mxs_mmc_data *data,
+ const struct mxs_mmc_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_8K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->dma,
+ .end = data->dma,
+ .flags = IORESOURCE_DMA,
+ }, {
+ .start = data->irq_err,
+ .end = data->irq_err,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = data->irq_dma,
+ .end = data->irq_dma,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return mxs_add_platform_device("mxs-mmc", data->id,
+ res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
index acd74b4..0418e8e 100644
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -70,3 +70,16 @@ struct mxs_flexcan_data {
struct platform_device *__init mxs_add_flexcan(
const struct mxs_flexcan_data *data,
const struct flexcan_platform_data *pdata);
+
+/* mmc */
+#include <mach/mmc.h>
+struct mxs_mmc_data {
+ int id;
+ resource_size_t iobase;
+ resource_size_t dma;
+ resource_size_t irq_err;
+ resource_size_t irq_dma;
+};
+struct platform_device *__init mxs_add_mmc(
+ const struct mxs_mmc_data *data,
+ const struct mxs_mmc_platform_data *pdata);
--
1.7.1
More information about the linux-arm-kernel
mailing list