[PATCH 12/21] ARM: tegra: clock: Add shared bus clock type

[Colin Cross]

On Wed, Feb 16, 2011 at 1:51 PM, Stephen Boyd <sboyd at codeaurora.org> wrote:
> On 02/16/2011 01:01 PM, Colin Cross wrote:
>> On Wed, Feb 16, 2011 at 12:34 PM, Stephen Boyd <sboyd at codeaurora.org> wrote:
>>>
>>> What do you do if clk_set_rate() fails? Should you unwind all the state
>>> such as the rate and if it's enabled/disabled? Or is it safe to say
>>> clk_set_rate() can't fail unless the kernel is buggy in which case why
>>> aren't all those return -E* in the set rate functions just BUG_ONs?
>>
>> In general, clk_set_rate can fail and return an error, but in this
>> case the failure may not be directly related to the driver that called
>> into tegra_clk_shared_bus_update.  For example, if clk_disable is
>> called on a shared clock handle, the rate may drop to the rate
>> requested by another shared clock handle.  clk_disable cannot fail, so
>> there's nothing that could be done with the return code, and the
>> problem was not caused by the driver that called clk_disable, so an
>> error would be meaningless.
>>
>>
>> I will modify tegra_clk_shared_bus_update to BUG on a failed
>> clk_set_rate,
>
> Yes, currently if there are any errors we can't determine which clock's
> vote is causing the error since the rate only takes effect when the
> clock is enabled and another clock could have updated their rate while
> the list is being iterated over.
>
> The code could be written so that we only call clk_set_rate() on the
> parent when the calling clock affects the aggregate rate. That would
> allow us to catch errors for the clk_enable() path and the
> clk_set_rate() path when the clock is already on. In the clk_disable()
> path we could just ignore the errors since we can't do anything anyways
> like you say. The only path that doesn't seem possible is clk_set_rate()
> when the clock is off which presumably doesn't actually matter since
> when you turn the clock on it will fail the same way (delayed
> clk_set_rate?).
>
> BTW, is there a race there in the rate updating code? Say clock 1 is
> enabled with rate 2 on cpu1 and clock 2 is enabled at the same time with
> rate 3 (currently the greatest rate) on cpu2. clock 1 is iterating over
> the list and sees that clock 2 is enabled so it calculates 3 as the max.
> clock 2 then returns from the enable call and then a call to disable
> clock 2 comes in. clock 1 is still iterating over the list and clock 2's
> call to disable runs to completion. clock 1 finally stops iterating over
> the list and has an aggregated rate of 3 (since it saw that clock 2 was
> on which is no longer true). It then calls set_rate() with 3 even though
> the only clock that is on is clock 1 with a rate of 2.
>
> c1 and c2 are off initially
>
> CPU1                    CPU2
> ----                    -----
> clk_set_rate(c1, 2)     clk_set_rate(c2, 3)
> clk_enable(c1)          clk_enable(c2)
> max == 3                max == 3; clk_set_rate(parent, 3)
> ...                     clk_disable(c2)
>                        max == 2; clk_set_rate(parent, 2)
> clk_set_rate(parent, 3)
>
> I think you need some kind of lock while iterating to stop the shared
> clocks from changing underneath you.
Yes, it needs a lock.  I missed adding it when I converted from a
global lock to a per-clock lock.  The children should lock the parent
before changing any of their state or calling
tegra_clk_shared_bus_update.

>> and modify tegra_clk_shared_bus_set_rate to
>> call clk_round_rate on the parent to ensure that the requested rate is valid.
>>
>
> I would hope clk_round_rate() isn't necessary to get a valid rate.
> clk_set_rate() shouldn't require exact/valid rates. clk_round_rate() is
> there to help drivers determine if calling clk_set_rate() with a certain
> rate is going to give them something they want. It's like saying "If I
> call clk_set_rate() with 500Hz what would the clock's rate actually be
> after the call returns?" If the set_rate implementation needs to round
> internally to find a divider or something, it should be done in the
> set_rate code and not in each driver.

The point is not to get the valid rate, it is to weed out rates that
will be rejected (not rounded) by clk_set_rate, without affecting the
clock.  If clk_set_rate will return an error, clk_round_rate should
also return an error.

>>>
>>> Shouldn't you call clk_enable(c->parent)? And do you need to check for
>>> errors from clk_enable()?
>>
>> clk_enable on the parent is handled by the clock op implementation in
>> mach-tegra/clock.c
>>
>
> Oops, thanks. Time to visit the optometrist.
>
> --
> Sent by an employee of the Qualcomm Innovation Center, Inc.
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>