[PATCH 04/11] OMAP2+: clock: comment that osc_ck/osc_sys_ck should use clockfw autoidle control

[Paul Walmsley]

Place some comments in the OMAP oscillator clock control code to note that
its autoidle mode should eventually be controlled via the new OMAP clockfw
autoidle control interface.

Signed-off-by: Paul Walmsley <paul at pwsan.com>
---
 arch/arm/mach-omap2/clkt2xxx_osc.c |   14 ++++++++++++++
 1 files changed, 14 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/clkt2xxx_osc.c b/arch/arm/mach-omap2/clkt2xxx_osc.c
index df7b805..c346092 100644
--- a/arch/arm/mach-omap2/clkt2xxx_osc.c
+++ b/arch/arm/mach-omap2/clkt2xxx_osc.c
@@ -30,6 +30,13 @@
 #include "prm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"
 
+/*
+ * XXX This does not actually enable the osc_ck, since the osc_ck must
+ * be running for this function to be called.  Instead, this function
+ * is used to disable an autoidle mode on the osc_ck.  The existing
+ * clk_enable/clk_disable()-based usecounting for osc_ck should be
+ * replaced with autoidle-based usecounting.
+ */
 static int omap2_enable_osc_ck(struct clk *clk)
 {
 	u32 pcc;
@@ -41,6 +48,13 @@ static int omap2_enable_osc_ck(struct clk *clk)
 	return 0;
 }
 
+/*
+ * XXX This does not actually disable the osc_ck, since doing so would
+ * immediately halt the system.  Instead, this function is used to
+ * enable an autoidle mode on the osc_ck.  The existing
+ * clk_enable/clk_disable()-based usecounting for osc_ck should be
+ * replaced with autoidle-based usecounting.
+ */
 static void omap2_disable_osc_ck(struct clk *clk)
 {
 	u32 pcc;