[PATCH 01/09] ARM: s3c2442: gta02: Fix usage gpio bank j pin definitions

Lars-Peter Clausen lars at metafoo.de
Mon Feb 28 05:46:49 EST 2011


On 02/28/2011 07:41 AM, Kukjin Kim wrote:
> Lars-Peter Clausen wrote:
>>
>> The gta02 header file still uses the old S3C2410_GPJx defines instead of
> the
>> S3C2410_GPJ(x) macro. Since the S3C2410_GPJx defines have already been
>> removed
>> this causes the following build failure:
>>
>> 	sound/soc/samsung/neo1973_wm8753.c: In function 'lm4853_set_spk':
>> 	sound/soc/samsung/neo1973_wm8753.c:259: error: 'S3C2440_GPJ2'
>> undeclared (first use in this function)
>> 	sound/soc/samsung/neo1973_wm8753.c:259: error: (Each undeclared
>> identifier is reported only once
>> 	sound/soc/samsung/neo1973_wm8753.c:259: error: for each function it
>> appears in.)
>> 	sound/soc/samsung/neo1973_wm8753.c: In function 'lm4853_get_spk':
>> 	sound/soc/samsung/neo1973_wm8753.c:267: error: 'S3C2440_GPJ2'
>> undeclared (first use in this function)
>> 	sound/soc/samsung/neo1973_wm8753.c: In function 'lm4853_event':
>> 	sound/soc/samsung/neo1973_wm8753.c:276: error: 'S3C2440_GPJ1'
>> undeclared (first use in this function)
>> 	sound/soc/samsung/neo1973_wm8753.c: At top level:
>> 	sound/soc/samsung/neo1973_wm8753.c:439: error: 'S3C2440_GPJ2'
>> undeclared here (not in a function)
>> 	sound/soc/samsung/neo1973_wm8753.c:440: error: 'S3C2440_GPJ1'
>> undeclared here (not in a function)
>>
>> This patches fixes the issue by doing a
>> s,S3C2410_GPJ([\d]+),S3C2410_GPJ(\1),g
> 
> Maybe, "s,S3C2440_GPJ([\d]+),S3C2410_GPJ(\1),g" instead ?
> 
>> on the file.
>>
>> Signed-off-by: Lars-Peter Clausen <lars at metafoo.de>
>> ---
>>  arch/arm/mach-s3c2440/include/mach/gta02.h |   26
> +++++++++++++-------------
>>  1 files changed, 13 insertions(+), 13 deletions(-)
>>
>> diff --git a/arch/arm/mach-s3c2440/include/mach/gta02.h b/arch/arm/mach-
>> s3c2440/include/mach/gta02.h
>> index 953331d..3a56a22 100644
>> --- a/arch/arm/mach-s3c2440/include/mach/gta02.h
>> +++ b/arch/arm/mach-s3c2440/include/mach/gta02.h
>> @@ -44,19 +44,19 @@
>>  #define GTA02v3_GPIO_nUSB_FLT	S3C2410_GPG(10)	/* v3 + v4 only */
>>  #define GTA02v3_GPIO_nGSM_OC	S3C2410_GPG(11)	/* v3 + v4 only */
>>
>> -#define GTA02_GPIO_AMP_SHUT	S3C2440_GPJ1	/* v2 + v3 + v4 only */
>> -#define GTA02v1_GPIO_WLAN_GPIO10	S3C2440_GPJ2
>> -#define GTA02_GPIO_HP_IN	S3C2440_GPJ2	/* v2 + v3 + v4 only */
>> -#define GTA02_GPIO_INT0		S3C2440_GPJ3	/* v2 + v3 + v4 only
> */
>> -#define GTA02_GPIO_nGSM_EN	S3C2440_GPJ4
>> -#define GTA02_GPIO_3D_RESET	S3C2440_GPJ5
>> -#define GTA02_GPIO_nDL_GSM	S3C2440_GPJ6	/* v4 + v5 only */
>> -#define GTA02_GPIO_WLAN_GPIO0	S3C2440_GPJ7
>> -#define GTA02v1_GPIO_BAT_ID	S3C2440_GPJ8
>> -#define GTA02_GPIO_KEEPACT	S3C2440_GPJ8
>> -#define GTA02v1_GPIO_HP_IN	S3C2440_GPJ10
>> -#define GTA02_CHIP_PWD		S3C2440_GPJ11	/* v2 + v3 + v4 only
> */
>> -#define GTA02_GPIO_nWLAN_RESET	S3C2440_GPJ12	/* v2 + v3 + v4 only
> */
>> +#define GTA02_GPIO_AMP_SHUT	S3C2410_GPJ(1)	/* v2 + v3 + v4 only */
>> +#define GTA02v1_GPIO_WLAN_GPIO10	S3C2410_GPJ(2)
>> +#define GTA02_GPIO_HP_IN	S3C2410_GPJ(2)	/* v2 + v3 + v4 only */
>> +#define GTA02_GPIO_INT0		S3C2410_GPJ(3)	/* v2 + v3 + v4 only
> */
>> +#define GTA02_GPIO_nGSM_EN	S3C2410_GPJ(4)
>> +#define GTA02_GPIO_3D_RESET	S3C2410_GPJ(5)
>> +#define GTA02_GPIO_nDL_GSM	S3C2410_GPJ(6)	/* v4 + v5 only */
>> +#define GTA02_GPIO_WLAN_GPIO0	S3C2410_GPJ(7)
>> +#define GTA02v1_GPIO_BAT_ID	S3C2410_GPJ(8)
>> +#define GTA02_GPIO_KEEPACT	S3C2410_GPJ(8)
>> +#define GTA02v1_GPIO_HP_IN	S3C2410_GPJ(10)
>> +#define GTA02_CHIP_PWD		S3C2410_GPJ(11)	/* v2 + v3 + v4
>> only */
>> +#define GTA02_GPIO_nWLAN_RESET	S3C2410_GPJ(12)	/* v2 + v3 + v4
>> only */
>>
>>  #define GTA02_IRQ_GSENSOR_1	IRQ_EINT0
>>  #define GTA02_IRQ_MODEM		IRQ_EINT1
>> --
>> 1.7.2.3
> 
> Yeah, old S3C2440_GPJx has removed.
> Is the S3C2410_GPJ(1) right instead of S3C2440_GPJ1?

I think so. At least the the compile errors are gone and the drivers using
these gpios work as expected.

- Lars



More information about the linux-arm-kernel mailing list